From: Konstantin Ananyev <konstantin.v.ananyev@yandex.ru>
To: dev@dpdk.org
Subject: Re: [PATCH v1 5/5] examples/l3fwd: enable direct rearm mode
Date: Wed, 11 May 2022 23:33:03 +0100 [thread overview]
Message-ID: <bd3bb82a-f91c-7d04-ce54-5389353e8fc8@yandex.ru> (raw)
In-Reply-To: <20220420081650.2043183-6-feifei.wang2@arm.com>
20/04/2022 09:16, Feifei Wang пишет:
> Enable direct rearm mode. The mapping is decided in the data plane based
> on the first packet received.
>
> Suggested-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> Signed-off-by: Feifei Wang <feifei.wang2@arm.com>
> Reviewed-by: Ruifeng Wang <ruifeng.wang@arm.com>
> Reviewed-by: Honnappa Nagarahalli <honnappa.nagarahalli@arm.com>
> ---
> examples/l3fwd/l3fwd_lpm.c | 16 +++++++++++++++-
> 1 file changed, 15 insertions(+), 1 deletion(-)
>
> diff --git a/examples/l3fwd/l3fwd_lpm.c b/examples/l3fwd/l3fwd_lpm.c
> index bec22c44cd..38ffdf4636 100644
> --- a/examples/l3fwd/l3fwd_lpm.c
> +++ b/examples/l3fwd/l3fwd_lpm.c
> @@ -147,7 +147,7 @@ lpm_main_loop(__rte_unused void *dummy)
> unsigned lcore_id;
> uint64_t prev_tsc, diff_tsc, cur_tsc;
> int i, nb_rx;
> - uint16_t portid;
> + uint16_t portid, tx_portid;
> uint8_t queueid;
> struct lcore_conf *qconf;
> const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) /
> @@ -158,6 +158,8 @@ lpm_main_loop(__rte_unused void *dummy)
>
> const uint16_t n_rx_q = qconf->n_rx_queue;
> const uint16_t n_tx_p = qconf->n_tx_port;
> + int direct_rearm_map[n_rx_q];
> +
> if (n_rx_q == 0) {
> RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
> return 0;
> @@ -169,6 +171,7 @@ lpm_main_loop(__rte_unused void *dummy)
>
> portid = qconf->rx_queue_list[i].port_id;
> queueid = qconf->rx_queue_list[i].queue_id;
> + direct_rearm_map[i] = 0;
> RTE_LOG(INFO, L3FWD,
> " -- lcoreid=%u portid=%u rxqueueid=%hhu\n",
> lcore_id, portid, queueid);
> @@ -209,6 +212,17 @@ lpm_main_loop(__rte_unused void *dummy)
> if (nb_rx == 0)
> continue;
>
> + /* Determine the direct rearm mapping based on the first
> + * packet received on the rx queue
> + */
> + if (direct_rearm_map[i] == 0) {
> + tx_portid = lpm_get_dst_port(qconf, pkts_burst[0],
> + portid);
> + rte_eth_direct_rxrearm_map(portid, queueid,
> + tx_portid, queueid);
> + direct_rearm_map[i] = 1;
> + }
> +
That just doesn't look right to me: why to make decision based on the
first packet?
What would happen if second and all other packets have to be routed
to different ports?
In fact, this direct-rearm mode seems suitable only for hard-coded
one to one mapped forwarding (examples/l2fwd, testpmd).
For l3fwd it can be used safely only when we have one port in use.
Also I think it should be selected at init-time and
it shouldn't be on by default.
To summarize, my opinion:
special cmd-line parameter to enable it.
allowable only when we run l3fwd over one port.
> #if defined RTE_ARCH_X86 || defined __ARM_NEON \
> || defined RTE_ARCH_PPC_64
> l3fwd_lpm_send_packets(nb_rx, pkts_burst,
next prev parent reply other threads:[~2022-05-11 22:33 UTC|newest]
Thread overview: 145+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-04-20 8:16 [PATCH v1 0/5] Direct re-arming of buffers on receive side Feifei Wang
2022-04-20 8:16 ` [PATCH v1 1/5] net/i40e: remove redundant Dtype initialization Feifei Wang
2022-04-20 8:16 ` [PATCH v1 2/5] net/i40e: enable direct rearm mode Feifei Wang
2022-05-11 22:28 ` Konstantin Ananyev
2022-04-20 8:16 ` [PATCH v1 3/5] ethdev: add API for " Feifei Wang
2022-04-20 9:59 ` Morten Brørup
2022-04-29 2:42 ` 回复: " Feifei Wang
2022-04-20 10:41 ` Andrew Rybchenko
2022-04-29 6:28 ` 回复: " Feifei Wang
2022-05-10 22:49 ` Honnappa Nagarahalli
2022-06-03 10:19 ` Andrew Rybchenko
2022-04-20 10:50 ` Jerin Jacob
2022-05-02 3:09 ` 回复: " Feifei Wang
2022-04-21 14:57 ` Stephen Hemminger
2022-04-29 6:35 ` 回复: " Feifei Wang
2022-04-20 8:16 ` [PATCH v1 4/5] net/i40e: add direct rearm mode internal API Feifei Wang
2022-05-11 22:31 ` Konstantin Ananyev
2022-04-20 8:16 ` [PATCH v1 5/5] examples/l3fwd: enable direct rearm mode Feifei Wang
2022-04-20 10:10 ` Morten Brørup
2022-04-21 2:35 ` Honnappa Nagarahalli
2022-04-21 6:40 ` Morten Brørup
2022-05-10 22:01 ` Honnappa Nagarahalli
2022-05-11 7:17 ` Morten Brørup
2022-05-11 22:33 ` Konstantin Ananyev [this message]
2022-05-27 11:28 ` Konstantin Ananyev
2022-05-31 17:14 ` Honnappa Nagarahalli
2022-06-03 10:32 ` Andrew Rybchenko
2022-06-06 11:27 ` Konstantin Ananyev
2022-06-29 21:25 ` Honnappa Nagarahalli
2022-05-11 23:00 ` [PATCH v1 0/5] Direct re-arming of buffers on receive side Konstantin Ananyev
[not found] ` <20220516061012.618787-1-feifei.wang2@arm.com>
2022-05-24 1:25 ` Konstantin Ananyev
2022-05-24 12:40 ` Morten Brørup
2022-05-24 20:14 ` Honnappa Nagarahalli
2022-05-28 12:22 ` Konstantin Ananyev
2022-06-01 1:00 ` Honnappa Nagarahalli
2022-06-03 23:32 ` Konstantin Ananyev
2022-06-04 8:07 ` Morten Brørup
2022-06-29 21:58 ` Honnappa Nagarahalli
2022-06-30 15:21 ` Morten Brørup
2022-07-01 19:30 ` Honnappa Nagarahalli
2022-07-01 20:28 ` Morten Brørup
2022-06-13 5:55 ` 回复: " Feifei Wang
2023-01-04 7:30 ` [PATCH v3 0/3] " Feifei Wang
2023-01-04 7:30 ` [PATCH v3 1/3] ethdev: enable direct rearm with separate API Feifei Wang
2023-01-04 8:21 ` Morten Brørup
2023-01-04 8:51 ` 回复: " Feifei Wang
2023-01-04 10:11 ` Morten Brørup
2023-02-24 8:55 ` 回复: " Feifei Wang
2023-03-06 12:49 ` Ferruh Yigit
2023-03-06 13:26 ` Morten Brørup
2023-03-06 14:53 ` 回复: " Feifei Wang
2023-03-06 15:02 ` Ferruh Yigit
2023-03-07 6:12 ` Honnappa Nagarahalli
2023-03-07 10:52 ` Konstantin Ananyev
2023-03-07 20:41 ` Ferruh Yigit
2023-03-22 14:43 ` Honnappa Nagarahalli
2023-02-02 14:33 ` Konstantin Ananyev
2023-02-24 9:45 ` 回复: " Feifei Wang
2023-02-27 19:31 ` Konstantin Ananyev
2023-02-28 2:16 ` 回复: " Feifei Wang
2023-02-28 8:09 ` Morten Brørup
2023-03-01 7:34 ` 回复: " Feifei Wang
2023-01-04 7:30 ` [PATCH v3 2/3] net/i40e: " Feifei Wang
2023-02-02 14:37 ` Konstantin Ananyev
2023-02-24 9:50 ` 回复: " Feifei Wang
2023-02-27 19:35 ` Konstantin Ananyev
2023-02-28 2:15 ` 回复: " Feifei Wang
2023-03-07 11:01 ` Konstantin Ananyev
2023-03-14 6:07 ` 回复: " Feifei Wang
2023-03-19 16:11 ` Konstantin Ananyev
2023-03-23 10:49 ` Feifei Wang
2023-01-04 7:30 ` [PATCH v3 3/3] net/ixgbe: " Feifei Wang
2023-01-31 6:13 ` 回复: [PATCH v3 0/3] Direct re-arming of buffers on receive side Feifei Wang
2023-02-01 1:10 ` Konstantin Ananyev
2023-02-01 2:24 ` 回复: " Feifei Wang
2023-03-22 12:56 ` Morten Brørup
2023-03-22 13:41 ` Honnappa Nagarahalli
2023-03-22 14:04 ` Morten Brørup
2023-08-02 7:38 ` [PATCH v8 0/4] Recycle mbufs from Tx queue into Rx queue Feifei Wang
2023-08-02 7:38 ` [PATCH v8 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-08-02 7:38 ` [PATCH v8 2/4] net/i40e: implement " Feifei Wang
2023-08-02 7:38 ` [PATCH v8 3/4] net/ixgbe: " Feifei Wang
2023-08-02 7:38 ` [PATCH v8 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-08-02 8:08 ` [PATCH v9 0/4] Recycle mbufs from Tx queue into Rx queue Feifei Wang
2023-08-02 8:08 ` [PATCH v9 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-08-02 8:08 ` [PATCH v9 2/4] net/i40e: implement " Feifei Wang
2023-08-02 8:08 ` [PATCH v9 3/4] net/ixgbe: " Feifei Wang
2023-08-02 8:08 ` [PATCH v9 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-08-04 9:24 ` [PATCH v10 0/4] Recycle mbufs from Tx queue into Rx queue Feifei Wang
2023-08-04 9:24 ` [PATCH v10 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-08-04 9:24 ` [PATCH v10 2/4] net/i40e: implement " Feifei Wang
2023-08-04 9:24 ` [PATCH v10 3/4] net/ixgbe: " Feifei Wang
2023-08-04 9:24 ` [PATCH v10 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-08-22 7:27 ` [PATCH v11 0/4] Recycle mbufs from Tx queue into Rx queue Feifei Wang
2023-08-22 7:27 ` [PATCH v11 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-08-22 14:02 ` Stephen Hemminger
2023-08-24 3:16 ` Feifei Wang
2023-08-22 23:33 ` Konstantin Ananyev
2023-08-24 3:38 ` Feifei Wang
2023-08-22 7:27 ` [PATCH v11 2/4] net/i40e: implement " Feifei Wang
2023-08-22 23:43 ` Konstantin Ananyev
2023-08-24 6:10 ` Feifei Wang
2023-08-31 17:24 ` Konstantin Ananyev
2023-08-31 23:49 ` Konstantin Ananyev
2023-09-01 12:22 ` Feifei Wang
2023-09-01 14:22 ` Konstantin Ananyev
2023-09-04 6:59 ` Feifei Wang
2023-09-04 7:49 ` Konstantin Ananyev
2023-09-04 9:24 ` Feifei Wang
2023-09-04 10:21 ` Konstantin Ananyev
2023-09-05 3:11 ` Feifei Wang
2023-09-22 14:58 ` Feifei Wang
2023-09-22 15:46 ` Feifei Wang
2023-09-22 16:40 ` Konstantin Ananyev
2023-09-23 5:52 ` Feifei Wang
2023-09-23 20:40 ` Konstantin Ananyev
2023-09-25 3:26 ` Feifei Wang
2023-08-22 7:27 ` [PATCH v11 3/4] net/ixgbe: " Feifei Wang
2023-08-22 7:27 ` [PATCH v11 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-08-22 7:33 ` [PATCH v11 0/4] Recycle mbufs from Tx queue into Rx queue Feifei Wang
2023-08-22 13:59 ` Stephen Hemminger
2023-08-24 3:11 ` Feifei Wang
2023-08-24 7:36 ` [PATCH v12 " Feifei Wang
2023-08-24 7:36 ` [PATCH v12 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-08-31 9:16 ` Feifei Wang
2023-09-20 13:10 ` Ferruh Yigit
2023-08-24 7:36 ` [PATCH v12 2/4] net/i40e: implement " Feifei Wang
2023-08-24 7:36 ` [PATCH v12 3/4] net/ixgbe: " Feifei Wang
2023-08-24 7:36 ` [PATCH v12 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-09-20 13:11 ` Ferruh Yigit
2023-09-20 13:12 ` [PATCH v12 0/4] Recycle mbufs from Tx queue into Rx queue Ferruh Yigit
2023-09-22 15:30 ` Ferruh Yigit
2023-09-25 3:19 ` [PATCH v13 " Feifei Wang
2023-09-25 3:19 ` [PATCH v13 1/4] ethdev: add API for mbufs recycle mode Feifei Wang
2023-09-25 4:40 ` Ajit Khaparde
2023-09-25 3:19 ` [PATCH v13 2/4] net/i40e: implement " Feifei Wang
2023-09-26 8:26 ` Ferruh Yigit
2023-09-26 8:56 ` Konstantin Ananyev
2023-09-26 13:34 ` Konstantin Ananyev
2023-09-25 3:19 ` [PATCH v13 3/4] net/ixgbe: " Feifei Wang
2023-09-26 13:30 ` Konstantin Ananyev
2023-09-25 3:19 ` [PATCH v13 4/4] app/testpmd: add recycle mbufs engine Feifei Wang
2023-09-26 13:30 ` Konstantin Ananyev
2023-09-26 16:38 ` Ajit Khaparde
2023-09-27 17:24 ` [PATCH v13 0/4] Recycle mbufs from Tx queue into Rx queue Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=bd3bb82a-f91c-7d04-ce54-5389353e8fc8@yandex.ru \
--to=konstantin.v.ananyev@yandex.ru \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).