From: Hemant Agrawal <hemant.agrawal@nxp.com>
To: Santosh Shukla <santosh.shukla@caviumnetworks.com>,
Shreyansh Jain <shreyansh.jain@nxp.com>
Cc: <dev@dpdk.org>, <thomas.monjalon@6wind.com>,
<bruce.richardson@intel.com>, <john.mcnamara@intel.com>,
<ferruh.yigit@intel.com>, <jerin.jacob@caviumnetworks.com>
Subject: Re: [dpdk-dev] [PATCH v3 16/33] drivers/pool/dpaa2: adding hw offloaded mempool
Date: Tue, 3 Jan 2017 13:52:00 +0530 [thread overview]
Message-ID: <cad37039-1dfd-5c68-29ab-0fc804afffd8@nxp.com> (raw)
In-Reply-To: <20161229070807.GA7823@santosh-Latitude-E5530-non-vPro>
On 12/29/2016 12:38 PM, Santosh Shukla wrote:
> Hi Shreyansh,
>
> On Thu, Dec 29, 2016 at 10:46:35AM +0530, Shreyansh Jain wrote:
>> From: Hemant Agrawal <hemant.agrawal@nxp.com>
>>
>> Adding NXP DPAA2 architecture specific mempool support
>> Each mempool instance is represented by a DPBP object
>> from the FSL-MC bus.
>>
>> This patch also registers a dpaa2 type MEMPOOL OPS
>>
>> Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
>> ---
>> config/common_base | 1 +
>> config/defconfig_arm64-dpaa2-linuxapp-gcc | 4 +
>> drivers/Makefile | 1 +
>> drivers/bus/fslmc/Makefile | 2 +
>> drivers/bus/fslmc/fslmc_vfio.c | 9 +-
>> drivers/bus/fslmc/fslmc_vfio.h | 2 +
>> drivers/bus/fslmc/portal/dpaa2_hw_dpbp.c | 137 +++++++++
>> drivers/bus/fslmc/portal/dpaa2_hw_pvt.h | 19 ++
>> drivers/bus/fslmc/rte_pmd_fslmcbus_version.map | 2 +
>> drivers/common/Makefile | 3 +
>> drivers/pool/Makefile | 38 +++
>> drivers/pool/dpaa2/Makefile | 67 +++++
>> drivers/pool/dpaa2/dpaa2_hw_mempool.c | 339 ++++++++++++++++++++++
>> drivers/pool/dpaa2/dpaa2_hw_mempool.h | 95 ++++++
>> drivers/pool/dpaa2/rte_pmd_dpaa2_pool_version.map | 8 +
>> mk/rte.app.mk | 1 +
>> 16 files changed, 727 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/bus/fslmc/portal/dpaa2_hw_dpbp.c
>> create mode 100644 drivers/pool/Makefile
>> create mode 100644 drivers/pool/dpaa2/Makefile
>> create mode 100644 drivers/pool/dpaa2/dpaa2_hw_mempool.c
>> create mode 100644 drivers/pool/dpaa2/dpaa2_hw_mempool.h
>> create mode 100644 drivers/pool/dpaa2/rte_pmd_dpaa2_pool_version.map
>>
>> diff --git a/config/common_base b/config/common_base
>> index d605e85..493811f 100644
>> --- a/config/common_base
>> +++ b/config/common_base
>> @@ -276,6 +276,7 @@ CONFIG_RTE_LIBRTE_THUNDERX_NICVF_DEBUG_MBOX=n
>> # Compile Support Libraries for NXP DPAA2
>> #
>> CONFIG_RTE_LIBRTE_DPAA2_COMMON=n
>> +CONFIG_RTE_LIBRTE_DPAA2_POOL=n
>>
>> #
>> # Compile NXP DPAA2 FSL-MC Bus
>> diff --git a/config/defconfig_arm64-dpaa2-linuxapp-gcc b/config/defconfig_arm64-dpaa2-linuxapp-gcc
>> index d3bc9d8..7665912 100644
>> --- a/config/defconfig_arm64-dpaa2-linuxapp-gcc
>> +++ b/config/defconfig_arm64-dpaa2-linuxapp-gcc
>> @@ -42,10 +42,14 @@ CONFIG_RTE_ARCH_ARM_TUNE="cortex-a57+fp+simd"
>> CONFIG_RTE_MAX_LCORE=8
>> CONFIG_RTE_MAX_NUMA_NODES=1
>>
>> +CONFIG_RTE_PKTMBUF_HEADROOM=256
>> +
>> #
>> # Compile Support Libraries for DPAA2
>> #
>> CONFIG_RTE_LIBRTE_DPAA2_COMMON=y
>> +CONFIG_RTE_LIBRTE_DPAA2_POOL=n
>> +CONFIG_RTE_MBUF_DEFAULT_MEMPOOL_OPS="dpaa2"
>>
>> #
>> # Compile NXP DPAA2 FSL-MC Bus
>> diff --git a/drivers/Makefile b/drivers/Makefile
>> index bdae63b..9fd268e 100644
>> --- a/drivers/Makefile
>> +++ b/drivers/Makefile
>> @@ -33,6 +33,7 @@ include $(RTE_SDK)/mk/rte.vars.mk
>>
>> DIRS-y += common
>> DIRS-y += bus
>> +DIRS-y += pool
>> DIRS-y += net
>> DIRS-$(CONFIG_RTE_LIBRTE_CRYPTODEV) += crypto
>>
>> diff --git a/drivers/bus/fslmc/Makefile b/drivers/bus/fslmc/Makefile
>> index 1b815dd..35f30ad 100644
>> --- a/drivers/bus/fslmc/Makefile
>> +++ b/drivers/bus/fslmc/Makefile
>> @@ -47,6 +47,7 @@ CFLAGS += "-Wno-strict-aliasing"
>> CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
>> CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc/mc
>> CFLAGS += -I$(RTE_SDK)/drivers/common/dpaa2/qbman/include
>> +CFLAGS += -I$(RTE_SDK)/drivers/pool/dpaa2
>> CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
>>
>> # versioning export map
>> @@ -63,6 +64,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += \
>> mc/mc_sys.c
>>
>> SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpio.c
>> +SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += portal/dpaa2_hw_dpbp.c
>> SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += fslmc_vfio.c
>> SRCS-$(CONFIG_RTE_LIBRTE_FSLMC_BUS) += fslmc_bus.c
>>
>> diff --git a/drivers/bus/fslmc/fslmc_vfio.c b/drivers/bus/fslmc/fslmc_vfio.c
>> index ed0a8b9..4e47ec8 100644
>> --- a/drivers/bus/fslmc/fslmc_vfio.c
>> +++ b/drivers/bus/fslmc/fslmc_vfio.c
>> @@ -268,7 +268,7 @@ int fslmc_vfio_process_group(struct rte_bus *bus)
>> char path[PATH_MAX];
>> int64_t v_addr;
>> int ndev_count;
>> - int dpio_count = 0;
>> + int dpio_count = 0, dpbp_count = 0;
>> struct fslmc_vfio_group *group = &vfio_groups[0];
>> static int process_once;
>>
>> @@ -418,6 +418,11 @@ int fslmc_vfio_process_group(struct rte_bus *bus)
>> if (!ret)
>> dpio_count++;
>> }
>> + if (!strcmp(object_type, "dpbp")) {
>> + ret = dpaa2_create_dpbp_device(object_id);
>> + if (!ret)
>> + dpbp_count++;
>> + }
>> }
>> closedir(d);
>>
>> @@ -425,6 +430,8 @@ int fslmc_vfio_process_group(struct rte_bus *bus)
>> if (ret)
>> FSLMC_VFIO_LOG(DEBUG, "Error in affining qbman swp %d", ret);
>>
>> + FSLMC_VFIO_LOG(DEBUG, "DPAA2: Added dpbp_count = %d dpio_count=%d\n",
>> + dpbp_count, dpio_count);
>> return 0;
>>
>> FAILURE:
>> diff --git a/drivers/bus/fslmc/fslmc_vfio.h b/drivers/bus/fslmc/fslmc_vfio.h
>> index e89d980..9bf69d4 100644
>> --- a/drivers/bus/fslmc/fslmc_vfio.h
>> +++ b/drivers/bus/fslmc/fslmc_vfio.h
>> @@ -76,4 +76,6 @@ int dpaa2_create_dpio_device(struct fslmc_vfio_device *vdev,
>> struct vfio_device_info *obj_info,
>> int object_id);
>>
>> +int dpaa2_create_dpbp_device(int dpbp_id);
>> +
>> #endif /* _FSLMC_VFIO_H_ */
>> diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_dpbp.c b/drivers/bus/fslmc/portal/dpaa2_hw_dpbp.c
>> new file mode 100644
>> index 0000000..16d5b24
>> --- /dev/null
>> +++ b/drivers/bus/fslmc/portal/dpaa2_hw_dpbp.c
>> @@ -0,0 +1,137 @@
>> +/*-
>> + * BSD LICENSE
>> + *
>> + * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
>> + * Copyright (c) 2016 NXP. All rights reserved.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following conditions
>> + * are met:
>> + *
>> + * * Redistributions of source code must retain the above copyright
>> + * notice, this list of conditions and the following disclaimer.
>> + * * Redistributions in binary form must reproduce the above copyright
>> + * notice, this list of conditions and the following disclaimer in
>> + * the documentation and/or other materials provided with the
>> + * distribution.
>> + * * Neither the name of Freescale Semiconductor, Inc nor the names of its
>> + * contributors may be used to endorse or promote products derived
>> + * from this software without specific prior written permission.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +#include <unistd.h>
>> +#include <stdio.h>
>> +#include <sys/types.h>
>> +#include <string.h>
>> +#include <stdlib.h>
>> +#include <fcntl.h>
>> +#include <errno.h>
>> +
>> +#include <rte_malloc.h>
>> +#include <rte_memcpy.h>
>> +#include <rte_string_fns.h>
>> +#include <rte_cycles.h>
>> +#include <rte_kvargs.h>
>> +#include <rte_dev.h>
>> +#include <rte_ethdev.h>
>> +
>> +#include <fslmc_logs.h>
>> +#include <fslmc_vfio.h>
>> +#include <mc/fsl_dpbp.h>
>> +#include "portal/dpaa2_hw_pvt.h"
>> +#include "portal/dpaa2_hw_dpio.h"
>> +
>> +TAILQ_HEAD(dpbp_device_list, dpaa2_dpbp_dev);
>> +static struct dpbp_device_list *dpbp_dev_list; /*!< DPBP device list */
>> +
>> +int
>> +dpaa2_create_dpbp_device(
>> + int dpbp_id)
>> +{
>> + struct dpaa2_dpbp_dev *dpbp_node;
>> + int ret;
>> +
>> + if (!dpbp_dev_list) {
>> + dpbp_dev_list = malloc(sizeof(struct dpbp_device_list));
>> + if (!dpbp_dev_list) {
>> + PMD_INIT_LOG(ERR, "Memory alloc failed in DPBP list\n");
>> + return -1;
>> + }
>> + /* Initialize the DPBP List */
>> + TAILQ_INIT(dpbp_dev_list);
>> + }
>> +
>> + /* Allocate DPAA2 dpbp handle */
>> + dpbp_node = (struct dpaa2_dpbp_dev *)
>> + malloc(sizeof(struct dpaa2_dpbp_dev));
>> + if (!dpbp_node) {
>> + PMD_INIT_LOG(ERR, "Memory allocation failed for DPBP Device");
>> + return -1;
>> + }
>> +
>> + /* Open the dpbp object */
>> + dpbp_node->dpbp.regs = mcp_ptr_list[MC_PORTAL_INDEX];
>> + ret = dpbp_open(&dpbp_node->dpbp,
>> + CMD_PRI_LOW, dpbp_id, &dpbp_node->token);
>> + if (ret) {
>> + PMD_INIT_LOG(ERR, "Resource alloc failure with err code: %d",
>> + ret);
>> + free(dpbp_node);
>> + return -1;
>> + }
>> +
>> + /* Clean the device first */
>> + ret = dpbp_reset(&dpbp_node->dpbp, CMD_PRI_LOW, dpbp_node->token);
>> + if (ret) {
>> + PMD_INIT_LOG(ERR, "Failure cleaning dpbp device with"
>> + " error code %d\n", ret);
>> + return -1;
>> + }
>> +
>> + dpbp_node->dpbp_id = dpbp_id;
>> + rte_atomic16_init(&dpbp_node->in_use);
>> +
>> + TAILQ_INSERT_HEAD(dpbp_dev_list, dpbp_node, next);
>> +
>> + PMD_INIT_LOG(DEBUG, "Buffer pool resource initialized %d", dpbp_id);
>> +
>> + return 0;
>> +}
>> +
>> +struct dpaa2_dpbp_dev *dpaa2_alloc_dpbp_dev(void)
>> +{
>> + struct dpaa2_dpbp_dev *dpbp_dev = NULL;
>> +
>> + /* Get DPBP dev handle from list using index */
>> + TAILQ_FOREACH(dpbp_dev, dpbp_dev_list, next) {
>> + if (dpbp_dev && rte_atomic16_test_and_set(&dpbp_dev->in_use))
>> + break;
>> + }
>> +
>> + return dpbp_dev;
>> +}
>> +
>> +void dpaa2_free_dpbp_dev(struct dpaa2_dpbp_dev *dpbp)
>> +{
>> + struct dpaa2_dpbp_dev *dpbp_dev = NULL;
>> +
>> + /* Match DPBP handle and mark it free */
>> + TAILQ_FOREACH(dpbp_dev, dpbp_dev_list, next) {
>> + if (dpbp_dev == dpbp) {
>> + rte_atomic16_dec(&dpbp_dev->in_use);
>> + return;
>> + }
>> + }
>> +}
>> diff --git a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
>> index ef3eb71..3b846a0 100644
>> --- a/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
>> +++ b/drivers/bus/fslmc/portal/dpaa2_hw_pvt.h
>> @@ -41,6 +41,13 @@
>> #define MC_PORTAL_INDEX 0
>> #define NUM_DPIO_REGIONS 2
>>
>> +#define MEMPOOL_F_HW_PKT_POOL 0x8000 /**< mpool flag to check offloaded pool */
>> +
>> +/* Maximum release/acquire from QBMAN */
>> +#define DPAA2_MBUF_MAX_ACQ_REL 7
>> +
>> +#define MAX_BPID 256
>> +
>> struct dpaa2_dpio_dev {
>> TAILQ_ENTRY(dpaa2_dpio_dev) next;
>> /**< Pointer to Next device instance */
>> @@ -63,6 +70,18 @@ struct dpaa2_dpio_dev {
>> int32_t hw_id; /**< An unique ID of this DPIO device instance */
>> };
>>
>> +struct dpaa2_dpbp_dev {
>> + TAILQ_ENTRY(dpaa2_dpbp_dev) next;
>> + /**< Pointer to Next device instance */
>> + struct fsl_mc_io dpbp; /** handle to DPBP portal object */
>> + uint16_t token;
>> + rte_atomic16_t in_use;
>> + uint32_t dpbp_id; /*HW ID for DPBP object */
>> +};
>> +
>> /*! Global MCP list */
>> extern void *(*mcp_ptr_list);
>> +struct dpaa2_dpbp_dev *dpaa2_alloc_dpbp_dev(void);
>> +void dpaa2_free_dpbp_dev(struct dpaa2_dpbp_dev *dpbp);
>> +
>> #endif
>> diff --git a/drivers/bus/fslmc/rte_pmd_fslmcbus_version.map b/drivers/bus/fslmc/rte_pmd_fslmcbus_version.map
>> index 4236377..76029b9 100644
>> --- a/drivers/bus/fslmc/rte_pmd_fslmcbus_version.map
>> +++ b/drivers/bus/fslmc/rte_pmd_fslmcbus_version.map
>> @@ -2,6 +2,8 @@ DPDK_17.02 {
>> global:
>>
>> dpaa2_affine_qbman_swp;
>> + dpaa2_alloc_dpbp_dev;
>> + dpaa2_free_dpbp_dev;
>> dpbp_disable;
>> dpbp_enable;
>> dpbp_get_attributes;
>> diff --git a/drivers/common/Makefile b/drivers/common/Makefile
>> index 434280f..0a6d8db 100644
>> --- a/drivers/common/Makefile
>> +++ b/drivers/common/Makefile
>> @@ -34,6 +34,9 @@ include $(RTE_SDK)/mk/rte.vars.mk
>> CONFIG_RTE_LIBRTE_DPAA2_COMMON = $(CONFIG_RTE_LIBRTE_DPAA2_PMD)
>>
>> ifneq ($(CONFIG_RTE_LIBRTE_DPAA2_COMMON),y)
>> +CONFIG_RTE_LIBRTE_DPAA2_COMMON = $(CONFIG_RTE_LIBRTE_DPAA2_POOL)
>> +endif
>> +ifneq ($(CONFIG_RTE_LIBRTE_DPAA2_COMMON),y)
>> CONFIG_RTE_LIBRTE_DPAA2_COMMON = $(CONFIG_RTE_LIBRTE_FSLMC_BUS)
>> endif
>>
>> diff --git a/drivers/pool/Makefile b/drivers/pool/Makefile
>> new file mode 100644
>> index 0000000..4325edd
>> --- /dev/null
>> +++ b/drivers/pool/Makefile
>> @@ -0,0 +1,38 @@
>> +# BSD LICENSE
>> +#
>> +# Copyright(c) 2016 NXP. All rights reserved.
>> +# All rights reserved.
>> +#
>> +# Redistribution and use in source and binary forms, with or without
>> +# modification, are permitted provided that the following conditions
>> +# are met:
>> +#
>> +# * Redistributions of source code must retain the above copyright
>> +# notice, this list of conditions and the following disclaimer.
>> +# * Redistributions in binary form must reproduce the above copyright
>> +# notice, this list of conditions and the following disclaimer in
>> +# the documentation and/or other materials provided with the
>> +# distribution.
>> +# * Neither the name of NXP nor the names of its
>> +# contributors may be used to endorse or promote products derived
>> +# from this software without specific prior written permission.
>> +#
>> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> +
>> +include $(RTE_SDK)/mk/rte.vars.mk
>> +
>> +CONFIG_RTE_LIBRTE_DPAA2_POOL = $(CONFIG_RTE_LIBRTE_DPAA2_PMD)
>> +
>> +DIRS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += dpaa2
>> +
>> +include $(RTE_SDK)/mk/rte.subdir.mk
>> diff --git a/drivers/pool/dpaa2/Makefile b/drivers/pool/dpaa2/Makefile
>> new file mode 100644
>> index 0000000..9494756
>> --- /dev/null
>> +++ b/drivers/pool/dpaa2/Makefile
>> @@ -0,0 +1,67 @@
>> +# BSD LICENSE
>> +#
>> +# Copyright(c) 2016 NXP. All rights reserved.
>> +# All rights reserved.
>> +#
>> +# Redistribution and use in source and binary forms, with or without
>> +# modification, are permitted provided that the following conditions
>> +# are met:
>> +#
>> +# * Redistributions of source code must retain the above copyright
>> +# notice, this list of conditions and the following disclaimer.
>> +# * Redistributions in binary form must reproduce the above copyright
>> +# notice, this list of conditions and the following disclaimer in
>> +# the documentation and/or other materials provided with the
>> +# distribution.
>> +# * Neither the name of NXP nor the names of its
>> +# contributors may be used to endorse or promote products derived
>> +# from this software without specific prior written permission.
>> +#
>> +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> +# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> +# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> +# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> +# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> +# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> +# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> +# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> +# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> +
>> +include $(RTE_SDK)/mk/rte.vars.mk
>> +
>> +#
>> +# library name
>> +#
>> +LIB = librte_pmd_dpaa2_pool.a
>> +
>> +ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_DEBUG_INIT),y)
>> +CFLAGS += -O0 -g
>> +CFLAGS += "-Wno-error"
>> +else
>> +CFLAGS += -O3
>> +CFLAGS += $(WERROR_FLAGS)
>> +endif
>> +
>> +CFLAGS += -I$(RTE_SDK)/drivers/bus/fslmc
>> +CFLAGS += -I$(RTE_SDK)/drivers/common/dpaa2/qbman/include
>> +CFLAGS += -I$(RTE_SDK)/lib/librte_eal/linuxapp/eal
>> +
>> +# versioning export map
>> +EXPORT_MAP := rte_pmd_dpaa2_pool_version.map
>> +
>> +# Lbrary version
>> +LIBABIVER := 1
>> +
>> +# all source are stored in SRCS-y
>> +#
>> +SRCS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += dpaa2_hw_mempool.c
>> +
>> +# library dependencies
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += lib/librte_eal
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += lib/librte_mempool
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += lib/librte_pmd_dpaa2_qbman
>> +DEPDIRS-$(CONFIG_RTE_LIBRTE_DPAA2_COMMON) += lib/librte_pmd_fslmcbus
>> +
>> +include $(RTE_SDK)/mk/rte.lib.mk
>> diff --git a/drivers/pool/dpaa2/dpaa2_hw_mempool.c b/drivers/pool/dpaa2/dpaa2_hw_mempool.c
>> new file mode 100644
>> index 0000000..f36e909
>> --- /dev/null
>> +++ b/drivers/pool/dpaa2/dpaa2_hw_mempool.c
>> @@ -0,0 +1,339 @@
>> +/*-
>> + * BSD LICENSE
>> + *
>> + * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
>> + * Copyright (c) 2016 NXP. All rights reserved.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following conditions
>> + * are met:
>> + *
>> + * * Redistributions of source code must retain the above copyright
>> + * notice, this list of conditions and the following disclaimer.
>> + * * Redistributions in binary form must reproduce the above copyright
>> + * notice, this list of conditions and the following disclaimer in
>> + * the documentation and/or other materials provided with the
>> + * distribution.
>> + * * Neither the name of Freescale Semiconductor, Inc nor the names of its
>> + * contributors may be used to endorse or promote products derived
>> + * from this software without specific prior written permission.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +#include <unistd.h>
>> +#include <stdio.h>
>> +#include <sys/types.h>
>> +#include <string.h>
>> +#include <stdlib.h>
>> +#include <fcntl.h>
>> +#include <errno.h>
>> +
>> +#include <rte_mbuf.h>
>> +#include <rte_ethdev.h>
>> +#include <rte_malloc.h>
>> +#include <rte_memcpy.h>
>> +#include <rte_string_fns.h>
>> +#include <rte_cycles.h>
>> +#include <rte_kvargs.h>
>> +#include <rte_dev.h>
>> +#include <rte_ethdev.h>
>> +
>> +#include <fslmc_logs.h>
>> +#include <mc/fsl_dpbp.h>
>> +#include <portal/dpaa2_hw_pvt.h>
>> +#include <portal/dpaa2_hw_dpio.h>
>> +#include "dpaa2_hw_mempool.h"
>> +
>> +struct dpaa2_bp_info bpid_info[MAX_BPID];
>> +static struct dpaa2_bp_list *h_bp_list;
>> +
>> +static int
>> +hw_mbuf_create_pool(struct rte_mempool *mp)
>> +{
>> + struct dpaa2_bp_list *bp_list;
>> + struct dpaa2_dpbp_dev *avail_dpbp;
>> + struct dpbp_attr dpbp_attr;
>> + uint32_t bpid;
>> + int ret;
>> +
>> + avail_dpbp = dpaa2_alloc_dpbp_dev();
>> +
>> + if (!avail_dpbp) {
>> + PMD_DRV_LOG(ERR, "DPAA2 resources not available");
>> + return -1;
>> + }
>> +
>> + if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
>> + ret = dpaa2_affine_qbman_swp();
>> + if (ret) {
>> + RTE_LOG(ERR, PMD, "Failure in affining portal\n");
>> + return 0;
>> + }
>> + }
>> +
>> + ret = dpbp_enable(&avail_dpbp->dpbp, CMD_PRI_LOW, avail_dpbp->token);
>> + if (ret != 0) {
>> + PMD_INIT_LOG(ERR, "Resource enable failure with"
>> + " err code: %d\n", ret);
>> + return -1;
>> + }
>> +
>> + ret = dpbp_get_attributes(&avail_dpbp->dpbp, CMD_PRI_LOW,
>> + avail_dpbp->token, &dpbp_attr);
>> + if (ret != 0) {
>> + PMD_INIT_LOG(ERR, "Resource read failure with"
>> + " err code: %d\n", ret);
>> + ret = dpbp_disable(&avail_dpbp->dpbp, CMD_PRI_LOW,
>> + avail_dpbp->token);
>> + return -1;
>> + }
>> +
>> + /* Allocate the bp_list which will be added into global_bp_list */
>> + bp_list = (struct dpaa2_bp_list *)malloc(sizeof(struct dpaa2_bp_list));
>> + if (!bp_list) {
>> + PMD_INIT_LOG(ERR, "No heap memory available");
>> + return -1;
>> + }
>> +
>> + /* Set parameters of buffer pool list */
>> + bp_list->buf_pool.num_bufs = mp->size;
>> + bp_list->buf_pool.size = mp->elt_size
>> + - sizeof(struct rte_mbuf) - rte_pktmbuf_priv_size(mp);
>> + bp_list->buf_pool.bpid = dpbp_attr.bpid;
>> + bp_list->buf_pool.h_bpool_mem = NULL;
>
> I am guessing that vfio-platform takes care of allocating memory to bman for
> buffer management (Beside mapping the platform resource) Or bman hw internally
> takes care and return a bpid handle to the application, right. Thus you don;t
> care for allocating mz area for this mempool.
>
No, that is not the case.
vfio-fsl-mc bus only manages the dpbp pools (mainly pool ids) for dpaa2
platform.
dpaa2_bp_list and buffer memory are all managed by the driver.
>> + bp_list->buf_pool.mp = mp;
>> + bp_list->buf_pool.dpbp_node = avail_dpbp;
>> + bp_list->next = h_bp_list;
>> +
>> + bpid = dpbp_attr.bpid;
>> +
>> +
>> + bpid_info[bpid].meta_data_size = sizeof(struct rte_mbuf)
>> + + rte_pktmbuf_priv_size(mp);
>> + bpid_info[bpid].bp_list = bp_list;
>> + bpid_info[bpid].bpid = bpid;
>> +
>> + mp->pool_data = (void *)&bpid_info[bpid];
>> +
>> + PMD_INIT_LOG(DEBUG, "BP List created for bpid =%d", dpbp_attr.bpid);
>> +
>> + h_bp_list = bp_list;
>> + /* Identification for our offloaded pool_data structure
>> + */
>> + mp->flags |= MEMPOOL_F_HW_PKT_POOL;
>> + return 0;
>> +}
>> +
>> +static void
>> +hw_mbuf_free_pool(struct rte_mempool *mp)
>> +{
>> + struct dpaa2_bp_info *bpinfo;
>> + struct dpaa2_bp_list *bp;
>> + struct dpaa2_dpbp_dev *dpbp_node;
>> +
>> + if (!mp->pool_data) {
>> + PMD_DRV_LOG(ERR, "Not a valid dpaa22 pool");
>> + return;
>> + }
>> +
>> + bpinfo = (struct dpaa2_bp_info *)mp->pool_data;
>> + bp = bpinfo->bp_list;
>> + dpbp_node = bp->buf_pool.dpbp_node;
>> +
>> + dpbp_disable(&(dpbp_node->dpbp), CMD_PRI_LOW, dpbp_node->token);
>> +
>> + if (h_bp_list == bp) {
>> + h_bp_list = h_bp_list->next;
>> + } else { /* if it is not the first node */
>> + struct dpaa2_bp_list *prev = h_bp_list, *temp;
>> + temp = h_bp_list->next;
>> + while (temp) {
>> + if (temp == bp) {
>> + prev->next = temp->next;
>> + free(bp);
>
> why not use rte_free()?
I see that rte_free/alloc are mostly for dmable memory or for
portability, which is not required here.
>
>> + break;
>> + }
>> + prev = temp;
>> + temp = temp->next;
>> + }
>> + }
>> +
>> + dpaa2_free_dpbp_dev(dpbp_node);
>> +}
>> +
>> +static
>> +void dpaa2_mbuf_release(struct rte_mempool *pool __rte_unused,
>> + void * const *obj_table,
>> + uint32_t bpid,
>> + uint32_t meta_data_size,
>> + int count)
>> +{
>> + struct qbman_release_desc releasedesc;
>> + struct qbman_swp *swp;
>> + int ret;
>> + int i, n;
>> + uint64_t bufs[DPAA2_MBUF_MAX_ACQ_REL];
>> +
>> + if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
>> + ret = dpaa2_affine_qbman_swp();
>> + if (ret != 0) {
>> + RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
>> + return;
>> + }
>> + }
>> + swp = DPAA2_PER_LCORE_PORTAL;
>> +
>> + /* Create a release descriptor required for releasing
>> + * buffers into QBMAN
>> + */
>> + qbman_release_desc_clear(&releasedesc);
>> + qbman_release_desc_set_bpid(&releasedesc, bpid);
>> +
>> + n = count % DPAA2_MBUF_MAX_ACQ_REL;
>> +
>> + /* convert mbuf to buffers for the remainder*/
>> + for (i = 0; i < n ; i++)
>> + bufs[i] = (uint64_t)obj_table[i] + meta_data_size;
>> +
>> + /* feed them to bman*/
>> + do {
>> + ret = qbman_swp_release(swp, &releasedesc, bufs, n);
>> + } while (ret == -EBUSY);
>> +
>> + /* if there are more buffers to free */
>> + while (n < count) {
>> + /* convert mbuf to buffers */
>> + for (i = 0; i < DPAA2_MBUF_MAX_ACQ_REL; i++)
>> + bufs[i] = (uint64_t)obj_table[n + i] + meta_data_size;
>> +
>> + do {
>> + ret = qbman_swp_release(swp, &releasedesc, bufs,
>> + DPAA2_MBUF_MAX_ACQ_REL);
>> + } while (ret == -EBUSY);
>> + n += DPAA2_MBUF_MAX_ACQ_REL;
>> + }
>> +}
>> +
>> +int hw_mbuf_alloc_bulk(struct rte_mempool *pool,
>> + void **obj_table, unsigned int count)
>> +{
>> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
>> + static int alloc;
>> +#endif
>> + struct qbman_swp *swp;
>> + uint32_t mbuf_size;
>> + uint16_t bpid;
>> + uint64_t bufs[DPAA2_MBUF_MAX_ACQ_REL];
>> + int i, ret;
>> + unsigned int n = 0;
>> + struct dpaa2_bp_info *bp_info;
>> +
>> + bp_info = mempool_to_bpinfo(pool);
>> +
>> + if (!(bp_info->bp_list)) {
>> + RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured\n");
>> + return -2;
>> + }
>> +
>> + bpid = bp_info->bpid;
>> +
>> + if (unlikely(!DPAA2_PER_LCORE_DPIO)) {
>> + ret = dpaa2_affine_qbman_swp();
>> + if (ret != 0) {
>> + RTE_LOG(ERR, PMD, "Failed to allocate IO portal");
>> + return -1;
>> + }
>> + }
>> + swp = DPAA2_PER_LCORE_PORTAL;
>> +
>> + mbuf_size = sizeof(struct rte_mbuf) + rte_pktmbuf_priv_size(pool);
>> +
>> + while (n < count) {
>> + /* Acquire is all-or-nothing, so we drain in 7s,
>> + * then the remainder.
>> + */
>> + if ((count - n) > DPAA2_MBUF_MAX_ACQ_REL) {
>> + ret = qbman_swp_acquire(swp, bpid, bufs,
>> + DPAA2_MBUF_MAX_ACQ_REL);
>> + } else {
>> + ret = qbman_swp_acquire(swp, bpid, bufs,
>> + count - n);
>> + }
>> + /* In case of less than requested number of buffers available
>> + * in pool, qbman_swp_acquire returns 0
>> + */
>> + if (ret <= 0) {
>> + PMD_TX_LOG(ERR, "Buffer acquire failed with"
>> + " err code: %d", ret);
>> + /* The API expect the exact number of requested bufs */
>> + /* Releasing all buffers allocated */
>> + dpaa2_mbuf_release(pool, obj_table, bpid,
>> + bp_info->meta_data_size, n);
>> + return -1;
>> + }
>> + /* assigning mbuf from the acquired objects */
>> + for (i = 0; (i < ret) && bufs[i]; i++) {
>> + /* TODO-errata - observed that bufs may be null
>> + * i.e. first buffer is valid,
>> + * remaining 6 buffers may be null
>> + */
>> + obj_table[n] = (struct rte_mbuf *)(bufs[i] - mbuf_size);
>> + rte_mbuf_refcnt_set((struct rte_mbuf *)obj_table[n], 0);
>> + PMD_TX_LOG(DEBUG, "Acquired %p address %p from BMAN",
>> + (void *)bufs[i], (void *)obj_table[n]);
>> + n++;
>> + }
>> + }
>> +
>> +#ifdef RTE_LIBRTE_DPAA2_DEBUG_DRIVER
>> + alloc += n;
>> + PMD_TX_LOG(DEBUG, "Total = %d , req = %d done = %d",
>> + alloc, count, n);
>> +#endif
>> + return 0;
>> +}
>> +
>> +static int
>> +hw_mbuf_free_bulk(struct rte_mempool *pool,
>> + void * const *obj_table, unsigned int n)
>> +{
>> + struct dpaa2_bp_info *bp_info;
>> +
>> + bp_info = mempool_to_bpinfo(pool);
>> + if (!(bp_info->bp_list)) {
>> + RTE_LOG(ERR, PMD, "DPAA2 buffer pool not configured");
>> + return -1;
>> + }
>> + dpaa2_mbuf_release(pool, obj_table, bp_info->bpid,
>> + bp_info->meta_data_size, n);
>> +
>> + return 0;
>> +}
>> +
>> +static unsigned
>> +hw_mbuf_get_count(const struct rte_mempool *mp __rte_unused)
>> +{
>> + return 0;
>> +}
>> +
>> +struct rte_mempool_ops dpaa2_mpool_ops = {
>> + .name = "dpaa2",
>> + .alloc = hw_mbuf_create_pool,
>> + .free = hw_mbuf_free_pool,
>> + .enqueue = hw_mbuf_free_bulk,
>> + .dequeue = hw_mbuf_alloc_bulk,
>> + .get_count = hw_mbuf_get_count,
>> +};
>> +
>> +MEMPOOL_REGISTER_OPS(dpaa2_mpool_ops);
>> diff --git a/drivers/pool/dpaa2/dpaa2_hw_mempool.h b/drivers/pool/dpaa2/dpaa2_hw_mempool.h
>> new file mode 100644
>> index 0000000..2cd2564
>> --- /dev/null
>> +++ b/drivers/pool/dpaa2/dpaa2_hw_mempool.h
>> @@ -0,0 +1,95 @@
>> +/*-
>> + * BSD LICENSE
>> + *
>> + * Copyright (c) 2016 Freescale Semiconductor, Inc. All rights reserved.
>> + * Copyright (c) 2016 NXP. All rights reserved.
>> + *
>> + * Redistribution and use in source and binary forms, with or without
>> + * modification, are permitted provided that the following conditions
>> + * are met:
>> + *
>> + * * Redistributions of source code must retain the above copyright
>> + * notice, this list of conditions and the following disclaimer.
>> + * * Redistributions in binary form must reproduce the above copyright
>> + * notice, this list of conditions and the following disclaimer in
>> + * the documentation and/or other materials provided with the
>> + * distribution.
>> + * * Neither the name of Freescale Semiconductor, Inc nor the names of its
>> + * contributors may be used to endorse or promote products derived
>> + * from this software without specific prior written permission.
>> + *
>> + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
>> + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
>> + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
>> + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
>> + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
>> + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
>> + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
>> + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
>> + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
>> + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
>> + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
>> + */
>> +
>> +#ifndef _DPAA2_HW_DPBP_H_
>> +#define _DPAA2_HW_DPBP_H_
>> +
>> +#define DPAA2_MAX_BUF_POOLS 8
>> +
>> +struct buf_pool_cfg {
>> + void *addr; /*!< The address from where DPAA2 will carve out the
>> + * buffers. 'addr' should be 'NULL' if user wants
>> + * to create buffers from the memory which user
>> + * asked DPAA2 to reserve during 'nadk init'
>> + */
>> + phys_addr_t phys_addr; /*!< corresponding physical address
>> + * of the memory provided in addr
>> + */
>> + uint32_t num; /*!< number of buffers */
>> + uint32_t size; /*!< size of each buffer. 'size' should include
>> + * any headroom to be reserved and alignment
>> + */
>> + uint16_t align; /*!< Buffer alignment (in bytes) */
>> + uint16_t bpid; /*!< The buffer pool id. This will be filled
>> + *in by DPAA2 for each buffer pool
>> + */
>> +};
>> +
>> +struct buf_pool {
>> + uint32_t size;
>> + uint32_t num_bufs;
>> + uint16_t bpid;
>> + uint8_t *h_bpool_mem;
>> + struct rte_mempool *mp;
>> + struct dpaa2_dpbp_dev *dpbp_node;
>> +};
>> +
>> +/*!
>> + * Buffer pool list configuration structure. User need to give DPAA2 the
>> + * valid number of 'num_buf_pools'.
>> + */
>> +struct dpaa2_bp_list_cfg {
>> + struct buf_pool_cfg buf_pool; /* Configuration of each buffer pool*/
>> +};
>> +
>
> isn't dpaa2_bp_list_cfg{} thus buf_pool_cfg{} redundant? I couldn't find
> struct used in this patch Or perhaps someother patch using them, If so then
> pl. ignore my comment.
>
Your comment is right, they are reduntant. we will clean it up, if we
are spinning a new version.
>> +struct dpaa2_bp_list {
>> + struct dpaa2_bp_list *next;
>> + struct rte_mempool *mp;
>> + struct buf_pool buf_pool;
>> +};
>> +
>> +struct dpaa2_bp_info {
>> + uint32_t meta_data_size;
>> + uint32_t bpid;
>> + struct dpaa2_bp_list *bp_list;
>> +};
>> +
>> +#define mempool_to_bpinfo(mp) ((struct dpaa2_bp_info *)(mp)->pool_data)
>> +#define mempool_to_bpid(mp) ((mempool_to_bpinfo(mp))->bpid)
>> +
>> +extern struct dpaa2_bp_info bpid_info[MAX_BPID];
>> +
>> +int hw_mbuf_alloc_bulk(struct rte_mempool *pool,
>> + void **obj_table, unsigned int count);
>> +
>> +#endif /* _DPAA2_HW_DPBP_H_ */
>> diff --git a/drivers/pool/dpaa2/rte_pmd_dpaa2_pool_version.map b/drivers/pool/dpaa2/rte_pmd_dpaa2_pool_version.map
>> new file mode 100644
>> index 0000000..289ab10
>> --- /dev/null
>> +++ b/drivers/pool/dpaa2/rte_pmd_dpaa2_pool_version.map
>> @@ -0,0 +1,8 @@
>> +DPDK_17.02 {
>> + global:
>> +
>> + bpid_info;
>> + hw_mbuf_alloc_bulk;
>> +
>> + local: *;
>> +};
>> diff --git a/mk/rte.app.mk b/mk/rte.app.mk
>> index 438fa2c..1bfb804 100644
>> --- a/mk/rte.app.mk
>> +++ b/mk/rte.app.mk
>> @@ -112,6 +112,7 @@ _LDLIBS-$(CONFIG_RTE_LIBRTE_CXGBE_PMD) += -lrte_pmd_cxgbe
>> ifeq ($(CONFIG_RTE_LIBRTE_DPAA2_COMMON),y)
>> _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_dpaa2
>> _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_dpaa2_qbman
>> +_LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_dpaa2_pool
>> _LDLIBS-$(CONFIG_RTE_LIBRTE_DPAA2_PMD) += -lrte_pmd_fslmcbus
>> endif
>> _LDLIBS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += -lrte_pmd_e1000
>> --
>> 2.7.4
>>
>
next prev parent reply other threads:[~2017-01-03 8:22 UTC|newest]
Thread overview: 549+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-12-04 18:16 [dpdk-dev] [PATCH 00/32] NXP DPAA2 PMD Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 01/32] doc: add dpaa2 nic details Hemant Agrawal
2016-12-05 17:12 ` Mcnamara, John
2016-12-06 13:58 ` Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-04 18:16 ` [dpdk-dev] [PATCH 02/32] drivers/common: introducing dpaa2 mc driver Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-12 10:32 ` Hemant Agrawal
2016-12-15 6:04 ` Jerin Jacob
2016-12-19 5:27 ` Hemant Agrawal
2016-12-17 9:55 ` Jerin Jacob
2016-12-19 15:23 ` Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 03/32] drivers/common/dpaa2: add mc dpni object support Hemant Agrawal
2016-12-04 18:16 ` [dpdk-dev] [PATCH 04/32] drivers/common/dpaa2: add mc dpio " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 05/32] drivers/common/dpaa2: add mc dpbp " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 06/32] drivers/common/dpaa2: add mc dpseci " Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 07/32] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 08/32] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2016-12-15 6:35 ` Jerin Jacob
2016-12-04 18:17 ` [dpdk-dev] [PATCH 09/32] lib/ether: add rte_device in rte_eth_dev Hemant Agrawal
2016-12-06 19:48 ` Ferruh Yigit
2016-12-07 6:41 ` Hemant Agrawal
2016-12-15 14:41 ` Ferruh Yigit
2016-12-19 5:30 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 10/32] net/dpaa2: introducing dpaa2 bus driver for fsl-mc bus Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-07 6:57 ` Hemant Agrawal
2016-12-07 10:13 ` Shreyansh Jain
2016-12-07 10:40 ` Thomas Monjalon
2016-12-07 12:21 ` David Marchand
2016-12-07 12:32 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 11/32] net/dpaa2: add dpaa2 vfio support Hemant Agrawal
2016-12-06 21:04 ` Thomas Monjalon
2016-12-07 7:00 ` Hemant Agrawal
2016-12-07 8:38 ` Thomas Monjalon
2016-12-07 10:04 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 12/32] net/dpaa2: vfio scan for net and sec device Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 13/32] net/dpaa2: add debug log macros Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:24 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 14/32] net/dpaa2: dpio object driver Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 15/32] net/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:25 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 16/32] net/dpaa2: dpio add support to check SOC type Hemant Agrawal
2016-12-15 6:34 ` Jerin Jacob
2016-12-15 7:01 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 17/32] net/dpaa2: dpbp based mempool hw offload driver Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-15 6:09 ` Jerin Jacob
2016-12-15 6:37 ` Shreyansh Jain
2016-12-15 6:54 ` Jerin Jacob
2016-12-04 18:17 ` [dpdk-dev] [PATCH 18/32] net/dpaa2: introducing dpaa2 pmd driver Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-06 21:08 ` Thomas Monjalon
2016-12-07 9:55 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 19/32] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:28 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 20/32] net/dpaa2: add queue configuration support Hemant Agrawal
2016-12-06 19:49 ` Ferruh Yigit
2016-12-19 15:30 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 21/32] net/dpaa2: add rss flow distribution Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-04 18:17 ` [dpdk-dev] [PATCH 22/32] net/dpaa2: configure mac address at init Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-19 15:31 ` Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 23/32] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 24/32] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 25/32] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 26/32] net/dpaa2: add mtu config support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 27/32] net/dpaa2: add packet rx and tx support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 28/32] net/dpaa2: add support for physical address usages Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-04 18:17 ` [dpdk-dev] [PATCH 29/32] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 30/32] net/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 31/32] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2016-12-04 18:17 ` [dpdk-dev] [PATCH 32/32] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2016-12-06 19:50 ` Ferruh Yigit
2016-12-06 19:48 ` [dpdk-dev] [PATCH 00/32] NXP DPAA2 PMD Ferruh Yigit
2016-12-07 9:53 ` Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 00/34] " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 01/34] lib/ether: add rte_device in rte_eth_dev Hemant Agrawal
2016-12-19 16:16 ` Stephen Hemminger
2016-12-20 4:41 ` Shreyansh Jain
2016-12-20 6:12 ` Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 02/34] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 03/34] doc: add dpaa2 nic details Hemant Agrawal
2016-12-21 18:45 ` Mcnamara, John
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 04/34] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 05/34] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 06/34] bus/fslmc: introduce mc object functions Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 07/34] bus/fslmc: add mc dpni object support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 08/34] bus/fslmc: add mc dpio " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 09/34] bus/fslmc: add mc dpbp " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 10/34] bus/fslmc: add mc dpseci " Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 11/34] bus/fslmc: add vfio support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 12/34] bus/fslmc: scan for net and sec devices Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 13/34] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 14/34] bus/fslmc: add debug log message support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 15/34] drivers/common/dpaa2: dpio object driver Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 16/34] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 17/34] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 18/34] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 19/34] net/dpaa2: add queue configuration support Hemant Agrawal
2016-12-19 20:53 ` [dpdk-dev] [PATCHv2 20/34] net/dpaa2: add rss flow distribution Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 21/34] net/dpaa2: configure mac address at init Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 22/34] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 23/34] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 24/34] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 25/34] net/dpaa2: add mtu config support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 26/34] net/dpaa2: add packet rx and tx support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 27/34] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 28/34] net/dpaa2: link status update Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 29/34] net/dpaa2: basic stats support Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 30/34] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 31/34] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 32/34] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 33/34] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2016-12-19 20:54 ` [dpdk-dev] [PATCHv2 34/34] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 00/33] NXP DPAA2 PMD Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 01/33] mk/dpaa2: add the crc support to the machine type Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 02/33] eal/vfio: adding vfio utility functions in map file Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 03/33] doc: add dpaa2 nic details Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 04/33] drivers/common/dpaa2: adding qbman driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 05/33] bus/fslmc: introducing fsl-mc bus driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 06/33] bus/fslmc: introduce mc object functions Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 07/33] bus/fslmc: add mc dpni object support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 08/33] bus/fslmc: add mc dpio " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 09/33] bus/fslmc: add mc dpbp " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 10/33] bus/fslmc: add mc dpseci " Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 11/33] bus/fslmc: add vfio support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 12/33] bus/fslmc: scan for net and sec devices Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 14/33] bus/fslmc: add debug log message support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 15/33] drivers/common/dpaa2: dpio portal driver Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Shreyansh Jain
2016-12-29 7:08 ` Santosh Shukla
2017-01-03 8:22 ` Hemant Agrawal [this message]
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 18/33] net/dpaa2: adding eth ops to dpaa2 Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 19/33] net/dpaa2: add rss flow distribution Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 20/33] net/dpaa2: configure mac address at init Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 21/33] net/dpaa2: attach the buffer pool to dpni Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 22/33] net/dpaa2: add support for l3 and l4 checksum offload Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 23/33] net/dpaa2: add support for promiscuous mode Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 24/33] net/dpaa2: add mtu config support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 25/33] net/dpaa2: add packet rx and tx support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 26/33] net/dpaa2: rx packet parsing and packet type support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 27/33] net/dpaa2: link status update Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 28/33] net/dpaa2: basic stats support Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 29/33] net/dpaa2: enable stashing for LS2088A devices Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 31/33] net/dpaa2: enabling the use of physical addresses Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 32/33] bus/fslmc: add support for dmamap to ARM SMMU Shreyansh Jain
2016-12-29 5:16 ` [dpdk-dev] [PATCH v3 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Shreyansh Jain
2017-01-09 17:42 ` [dpdk-dev] [PATCH v3 00/33] NXP DPAA2 PMD Ferruh Yigit
2017-01-10 4:19 ` Shreyansh Jain
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 02/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 03/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 04/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 05/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 06/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 07/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 08/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 09/33] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 10/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 11/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 12/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-17 18:52 ` [dpdk-dev] [PATCHv4 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 00/33] NXP DPAA2 PMD Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCH] cryptodev: decouple from PCI device Hemant Agrawal
2017-01-19 13:27 ` Hemant Agrawal
2017-01-20 12:28 ` De Lara Guarch, Pablo
2017-01-19 13:23 ` [dpdk-dev] [PATCH] mbuf: use pktmbuf helper to create the pool Hemant Agrawal
2017-01-19 13:27 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 02/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-19 17:08 ` Thomas Monjalon
2017-01-20 4:47 ` Hemant Agrawal
2017-01-19 17:34 ` Mcnamara, John
2017-01-20 4:46 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 03/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-19 19:07 ` Ferruh Yigit
2017-01-20 4:48 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 04/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-19 17:12 ` Thomas Monjalon
2017-01-19 19:08 ` Ferruh Yigit
2017-01-20 5:05 ` Shreyansh Jain
2017-01-20 11:39 ` Ferruh Yigit
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 05/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-19 19:10 ` Ferruh Yigit
2017-01-20 4:52 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 06/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-19 17:14 ` Thomas Monjalon
2017-01-20 12:00 ` Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 07/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 08/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 09/33] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 10/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-19 17:16 ` Thomas Monjalon
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 11/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-19 17:23 ` Thomas Monjalon
2017-01-20 4:58 ` Hemant Agrawal
2017-01-19 19:12 ` Ferruh Yigit
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 12/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 13/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-19 19:15 ` Ferruh Yigit
2017-01-20 14:01 ` Shreyansh Jain
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-19 13:23 ` [dpdk-dev] [PATCHv5 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-19 13:24 ` [dpdk-dev] [PATCHv5 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 00/33] NXP DPAA2 PMD Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 01/33] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 02/33] drivers/common/dpaa2: adding qbman driver Hemant Agrawal
2017-01-23 17:30 ` Ferruh Yigit
2017-01-24 6:28 ` Shreyansh Jain
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 03/33] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 04/33] bus/fslmc: introduce mc object functions Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 05/33] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 06/33] bus/fslmc: add mc dpio " Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 07/33] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 08/33] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 09/33] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 10/33] bus/fslmc: add vfio support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 11/33] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 12/33] net/dpaa2: introducing NXP dpaa2 pmd driver Hemant Agrawal
2017-01-23 17:32 ` Ferruh Yigit
2017-01-24 8:38 ` Shreyansh Jain
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 13/33] doc: add dpaa2 nic details Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 14/33] bus/fslmc: add debug log message support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 15/33] drivers/common/dpaa2: dpio portal driver Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 16/33] drivers/pool/dpaa2: adding hw offloaded mempool Hemant Agrawal
2017-01-23 17:34 ` Ferruh Yigit
2017-01-24 9:12 ` Shreyansh Jain
2017-01-24 10:49 ` Ferruh Yigit
2017-01-24 14:37 ` Hemant Agrawal
2017-01-24 16:35 ` Ferruh Yigit
2017-01-24 17:28 ` Thomas Monjalon
2017-01-25 12:23 ` Neil Horman
2017-01-25 13:34 ` Shreyansh Jain
2017-01-25 13:47 ` Jerin Jacob
2017-01-25 15:07 ` Neil Horman
2017-01-26 12:05 ` Shreyansh Jain
2017-01-25 15:29 ` Ferruh Yigit
2017-01-25 15:33 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 17/33] drivers/common/dpaa2: dpio routine to affine to crypto threads Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 18/33] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-01-23 17:35 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 19/33] net/dpaa2: add rss flow distribution Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 20/33] net/dpaa2: configure mac address at init Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 21/33] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 22/33] net/dpaa2: add support for l3 and l4 checksum offload Hemant Agrawal
2017-01-23 17:35 ` Ferruh Yigit
2017-01-24 10:45 ` Hemant Agrawal
2017-01-24 10:51 ` Ferruh Yigit
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 23/33] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 24/33] net/dpaa2: add mtu config support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 25/33] net/dpaa2: add packet rx and tx support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 26/33] net/dpaa2: rx packet parsing and packet type support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 27/33] net/dpaa2: link status update Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 28/33] net/dpaa2: basic stats support Hemant Agrawal
2017-01-23 11:59 ` [dpdk-dev] [PATCHv6 29/33] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 30/33] net/dpaa2: add support for non hw buffer pool packet transmit Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 31/33] net/dpaa2: enabling the use of physical addresses Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 32/33] bus/fslmc: add support for dmamap to ARM SMMU Hemant Agrawal
2017-01-23 12:00 ` [dpdk-dev] [PATCHv6 33/33] drivers/common/dpaa2: frame queue based dq storage alloc Hemant Agrawal
2017-01-23 17:56 ` [dpdk-dev] [PATCHv6 00/33] NXP DPAA2 PMD Ferruh Yigit
2017-01-26 11:55 ` Ferruh Yigit
2017-01-26 12:18 ` Hemant Agrawal
2017-01-26 18:02 ` Thomas Monjalon
2017-01-23 17:58 ` Ferruh Yigit
2017-01-24 11:25 ` Ferruh Yigit
2017-01-25 4:03 ` Hemant Agrawal
2017-02-16 0:38 ` [dpdk-dev] [PATCHv7 00/47] " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 01/47] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 02/47] mk: handle intra drivers dependencies for shared build Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Hemant Agrawal
2017-02-16 5:57 ` Shreyansh Jain
2017-02-21 13:42 ` [dpdk-dev] Hello Ferruh, Neil, Shreyansh Jain
2017-02-21 13:45 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Shreyansh Jain
2017-02-21 14:39 ` [dpdk-dev] Hello Ferruh, Neil, Ferruh Yigit
2017-02-22 8:23 ` [dpdk-dev] [PATCHv7 03/47] common/dpaa2: adding qbman driver Shreyansh Jain
2017-02-24 9:58 ` Ferruh Yigit
2017-02-27 10:01 ` Shreyansh Jain
2017-02-27 15:35 ` Ferruh Yigit
2017-02-28 5:27 ` Shreyansh Jain
2017-03-01 11:00 ` Thomas Monjalon
2017-03-01 12:26 ` Hemant Agrawal
2017-02-22 12:41 ` [dpdk-dev] Hello Ferruh, Neil, Neil Horman
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 04/47] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 05/47] bus/fslmc: introduce MC object functions Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 06/47] bus/fslmc: add mc dpni object support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 07/47] bus/fslmc: add mc dpio " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 08/47] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 09/47] bus/fslmc: add mc dpseci " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 10/47] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 11/47] bus/fslmc: add vfio support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 12/47] bus/fslmc: scan for net and sec devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 13/47] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 14/47] doc: add DPAA2 NIC details Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 15/47] bus/fslmc: add debug log support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 16/47] net/dpaa2: " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 17/47] common/dpaa2: " Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 18/47] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 19/47] bus/fslmc: dpio portal driver Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 20/47] pool/dpaa2: add DPAA2 hardware offloaded mempool Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 21/47] bus/fslmc: affine dpio to crypto threads Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 22/47] bus/fslmc: define queues for DPAA2 devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 23/47] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 24/47] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 25/47] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 26/47] bus/fslmc: define hardware annotation area size Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 27/47] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 28/47] bus/fslmc: introduce true and false macros Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 29/47] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 30/47] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 31/47] bus/fslmc: define VLAN header length Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 32/47] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 33/47] bus/fslmc: add packet FLE definitions Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 34/47] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 35/47] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 36/47] net/dpaa2: link status update Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 37/47] net/dpaa2: basic stats support Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 38/47] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 39/47] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 40/47] bus/fslmc: add physical-virtual address translation helpers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 41/47] pool/dpaa2: enable physical addressing for pool buffers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 42/47] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 43/47] config: add configuration for toggling physical addressing Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 44/47] bus/fslmc: add support for DMA mapping for ARM SMMU Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 45/47] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 46/47] bus/fslmc: frame queue based dq storage alloc Hemant Agrawal
2017-02-16 0:39 ` [dpdk-dev] [PATCHv7 47/47] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-02-16 13:22 ` [dpdk-dev] [PATCHv7 00/47] NXP DPAA2 PMD Neil Horman
2017-02-16 13:27 ` Bruce Richardson
2017-02-17 11:34 ` Ferruh Yigit
2017-02-17 12:13 ` Bruce Richardson
2017-02-17 12:17 ` Vincent JARDIN
2017-02-17 22:48 ` Neil Horman
2017-02-17 13:40 ` Thomas Monjalon
2017-02-17 12:29 ` Hemant Agrawal
2017-02-19 14:44 ` Neil Horman
2017-02-20 5:31 ` Hemant Agrawal
2017-02-20 12:20 ` Neil Horman
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 00/46] " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 01/46] mk/dpaa2: add the crc support to the machine type Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 02/46] mk: handle intra drivers dependencies for shared build Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 03/46] bus/fslmc: introducing fsl-mc bus driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 04/46] bus/fslmc: add QBMAN driver to bus Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 05/46] bus/fslmc: introduce MC object functions Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 06/46] bus/fslmc: add mc dpio object support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 07/46] bus/fslmc: add mc dpbp " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 08/46] eal/vfio: adding vfio utility functions in map file Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 09/46] bus/fslmc: add vfio support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 10/46] bus/fslmc: scan for net and sec device Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 11/46] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 12/46] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 13/46] bus/fslmc: add debug log support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 14/46] net/dpaa2: " Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 15/46] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 16/46] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 17/46] bus/fslmc: dpio portal driver Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 18/46] bus/fslmc: introduce support for hw mempool object Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 19/46] pool/dpaa2: add DPAA2 hardware offloaded mempool Hemant Agrawal
2017-03-07 16:24 ` Ferruh Yigit
2017-03-08 9:05 ` Olivier MATZ
2017-03-08 12:52 ` Hemant Agrawal
2017-03-08 15:39 ` Thomas Monjalon
2017-03-09 5:57 ` Hemant Agrawal
2017-03-14 6:42 ` Hemant Agrawal
2017-03-14 8:14 ` Olivier Matz
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 20/46] bus/fslmc: affine dpio to crypto threads Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 21/46] bus/fslmc: define queues for DPAA2 devices Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 22/46] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 23/46] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 24/46] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 25/46] bus/fslmc: define hardware annotation area size Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 26/46] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 27/46] bus/fslmc: introduce true and false macros Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 28/46] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 29/46] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 30/46] bus/fslmc: define VLAN header length Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 31/46] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 32/46] bus/fslmc: add packet FLE definitions Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 33/46] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 34/46] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 35/46] net/dpaa2: link status update Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 36/46] net/dpaa2: basic stats support Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 37/46] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 38/46] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 39/46] bus/fslmc: add physical-virtual address translation helpers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 40/46] pool/dpaa2: enable physical addressing for pool buffers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 41/46] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-03 12:46 ` [dpdk-dev] [PATCHv8 42/46] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 43/46] bus/fslmc: add support for DMA mapping for ARM SMMU Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 44/46] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 45/46] bus/fslmc: frame queue based dq storage alloc Hemant Agrawal
2017-03-03 12:47 ` [dpdk-dev] [PATCHv8 46/46] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-07 16:13 ` [dpdk-dev] [PATCHv8 00/46] NXP DPAA2 PMD Thomas Monjalon
2017-03-07 17:00 ` Ferruh Yigit
2017-03-08 12:30 ` Shreyansh Jain
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 00/22] " Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-24 15:35 ` Ferruh Yigit
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 15/22] net/dpaa2: link status update Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-17 13:08 ` [dpdk-dev] [PATCH v9 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-23 14:34 ` [dpdk-dev] [PATCH v9 00/22] NXP DPAA2 PMD Ferruh Yigit
2017-03-23 16:59 ` Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 " Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 15/22] net/dpaa2: link status update Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-03-24 13:35 ` [dpdk-dev] [PATCH v10 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-03-24 14:58 ` [dpdk-dev] [PATCH v10 00/22] NXP DPAA2 PMD Ferruh Yigit
2017-03-24 15:19 ` Shreyansh Jain
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 " Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-04-09 12:23 ` Shreyansh Jain
2017-04-10 4:54 ` [dpdk-dev] [PATCH] doc: fix build error in DPAA2 PMD guide Shreyansh Jain
2017-04-10 7:46 ` Mcnamara, John
2017-04-11 14:58 ` Ferruh Yigit
2017-04-11 17:13 ` Shreyansh Jain
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 15/22] net/dpaa2: link status update Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-04-09 8:11 ` [dpdk-dev] [PATCH v11 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 00/22] NXP DPAA2 PMD Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 01/22] net/dpaa2: introducing NXP DPAA2 PMD driver Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 02/22] doc: add DPAA2 NIC details Hemant Agrawal
2017-04-12 15:28 ` Ferruh Yigit
2017-04-13 9:22 ` Shreyansh Jain
2017-04-13 9:18 ` Ferruh Yigit
2017-04-14 12:08 ` Ferruh Yigit
2017-04-14 16:50 ` Shreyansh Jain
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 03/22] net/dpaa2: add debug log support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 04/22] config: enable support for DPAA2 debug logging Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 05/22] net/dpaa2: add mc dpni object support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 06/22] net/dpaa2: adding eth ops to dpaa2 Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 07/22] net/dpaa2: add RSS flow distribution Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 08/22] net/dpaa2: configure MAC address at init Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 09/22] net/dpaa2: attach the buffer pool to dpni Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 10/22] net/dpaa2: add support for L3 and L4 checksum offload Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 11/22] net/dpaa2: add support for promiscuous mode Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 12/22] net/dpaa2: add MTU configuration support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 13/22] net/dpaa2: enable packet Rx and Tx operations Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 14/22] net/dpaa2: support for Rx packet parsing and packet type Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 15/22] net/dpaa2: link status update Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 16/22] net/dpaa2: basic stats support Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 17/22] net/dpaa2: enable stashing for LS2088A devices Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 18/22] net/dpaa2: handle non-hardware backed buffer pool Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 19/22] net/dpaa2: enable physical addressing for packet buffers Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 20/22] config: add configuration for toggling physical addressing Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 21/22] net/dpaa2: enable DMA Mapping during device scanning Hemant Agrawal
2017-04-11 13:49 ` [dpdk-dev] [PATCH v12 22/22] net/dpaa2: enable frame queue based dequeuing Hemant Agrawal
2017-04-12 13:52 ` [dpdk-dev] [PATCH v12 00/22] NXP DPAA2 PMD Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=cad37039-1dfd-5c68-29ab-0fc804afffd8@nxp.com \
--to=hemant.agrawal@nxp.com \
--cc=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
--cc=ferruh.yigit@intel.com \
--cc=jerin.jacob@caviumnetworks.com \
--cc=john.mcnamara@intel.com \
--cc=santosh.shukla@caviumnetworks.com \
--cc=shreyansh.jain@nxp.com \
--cc=thomas.monjalon@6wind.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).