Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom NIC in Arm hardware

[Ajit Khaparde <ajit.khaparde@broadcom.com>]

[-- Attachment #1.1: Type: text/plain, Size: 14585 bytes --]

On Thu, Feb 18, 2021 at 10:01 AM David Liu <dliu@iol.unh.edu> wrote:

> Hi Ajit,
>
> This is likely caused by when dts try to ssh into another machine as a
> normal user which will prompt you for the password.
>
> One solution would be "sudo su" as root to run the command line since you
> should have root access.
>
David,
Let me try this method first.
If it does not work, we could try with the public ssh keys.
I will let you know.

Thanks
Ajit

>
> Another solution would be to let me add your public ssh key into both
> machines.
>
> Let me know if this helps.
>
> Best,
> David
>
> On Fri, Feb 12, 2021 at 5:48 PM Ajit Khaparde <ajit.khaparde@broadcom.com>
> wrote:
>
>> Thanks Owen.
>>
>> When I run the dts command line suggested, I get the following error.
>>
>> Thanks
>> Ajit
>>
>> Traceback (most recent call last):
>>   File "/opt/dts/framework/ssh_pexpect.py", line 60, in _connect_host
>>     self.password, original_prompt='[$#>]',
>> password_regex=r'(?i)(?:password:)|(?:passphrase for key)|(?i)(password for
>> .+:)')
>>   File "/usr/local/lib/python3.6/dist-packages/pexpect/pxssh.py", line
>> 440, in login
>>     raise ExceptionPxssh('password refused')
>> pexpect.pxssh.ExceptionPxssh: password refused
>>                                          ^^^^^^^^^^^^^^
>>
>>
>>
>> On Fri, Feb 12, 2021 at 12:09 PM Owen Hilyard <ohilyard@iol.unh.edu>
>> wrote:
>>
>>> Hello Ajit,
>>>
>>> There was a misconfiguration in our identity management system. The
>>> issue should now be resolved.
>>>
>>> Owen Hilyard
>>>
>>> On Thu, Feb 11, 2021 at 9:38 PM 'Ajit Khaparde' via dpdklab <
>>> dpdklab@iol.unh.edu> wrote:
>>>
>>>> David,
>>>> I can use my credentials to login to rhea.
>>>> But the same credentials are not allowing me to login onto the servers
>>>> you provided.
>>>>
>>>> Thanks
>>>> Ajit
>>>>
>>>> ssh -l ajitkhaparde arm-gigabyte.dpdklab.iol.unh.edu
>>>> Connection closed by 172.18.0.41 port 22
>>>>
>>>> ssh -l ajitkhaparde arm-dell.dpdklab.iol.unh.edu
>>>> Connection closed by 172.18.0.40 port 22
>>>>
>>>> On Tue, Feb 9, 2021 at 6:36 AM David Liu <dliu@iol.unh.edu> wrote:
>>>>
>>>>> Hi Ajit,
>>>>>
>>>>> Thanks for the update. Let me know if you need anything from me.
>>>>>
>>>>>
>>>>> Best,
>>>>> David
>>>>>
>>>>> On Sun, Feb 7, 2021 at 11:04 PM Ajit Khaparde <
>>>>> ajit.khaparde@broadcom.com> wrote:
>>>>>
>>>>>> David,
>>>>>> I had some trouble with my system over the past week.
>>>>>> So I could not login into the setup. I am hoping that my system will
>>>>>> be restored early this week
>>>>>> I will login into the setup after that.
>>>>>>
>>>>>> Thanks
>>>>>> Ajit
>>>>>>
>>>>>> On Tue, Feb 2, 2021 at 10:57 AM Ajit Khaparde <
>>>>>> ajit.khaparde@broadcom.com> wrote:
>>>>>>
>>>>>>> Hi David,
>>>>>>> I actually did miss it. I will take a look.
>>>>>>> Thanks for the refresh mail.
>>>>>>>
>>>>>>> Thanks
>>>>>>> Ajit
>>>>>>>
>>>>>>> On Tue, Feb 2, 2021 at 8:58 AM David Liu <dliu@iol.unh.edu> wrote:
>>>>>>> >
>>>>>>> > Hi Ajit,
>>>>>>> >
>>>>>>> > Ping again in case if you miss the last email.
>>>>>>> >
>>>>>>> > Did you have a chance to give it a try on login to the machines?
>>>>>>> >
>>>>>>> > Just some notes, we are currently running compile and some
>>>>>>> performance/functional testing.
>>>>>>> > Which it may be hard for you to run dts, so please let me know if
>>>>>>> you want me to stop these tests for you to debug.
>>>>>>> >
>>>>>>> > Step I run:
>>>>>>> > CONF="conf_dpdk" ./switch.sh Broadcom   #this is to switch the dts
>>>>>>> configuration to Broadcom
>>>>>>> > ./dts -s
>>>>>>>  #To start the dts
>>>>>>> >
>>>>>>> > Informatio:
>>>>>>> > arm-dell.dpdklab.iol.unh.edu
>>>>>>> > - dts - located in /opt/dts
>>>>>>> > - Trex - located in /opt/trex/v2.87
>>>>>>> >
>>>>>>> > arm-gigabyte.dpdklab.iol.unh.edu
>>>>>>> > - dpdk - located in /root/dpdk
>>>>>>> >
>>>>>>> > Best,
>>>>>>> > David
>>>>>>> >
>>>>>>> > On Tue, Jan 26, 2021 at 4:59 PM David Liu <dliu@iol.unh.edu>
>>>>>>> wrote:
>>>>>>> >>
>>>>>>> >> Also, I had changed the configuration when I run Broadcom nic.
>>>>>>> >> In the dts folder, you can start it with ./dts -s
>>>>>>> >>
>>>>>>> >> On Tue, Jan 26, 2021 at 4:54 PM David Liu <dliu@iol.unh.edu>
>>>>>>> wrote:
>>>>>>> >>>
>>>>>>> >>> Hi Ajit,
>>>>>>> >>> Sorry for the late reply.
>>>>>>> >>>
>>>>>>> >>> You can ssh into the machine using the same VPN Username and
>>>>>>> Password.
>>>>>>> >>> Can you try and see if that works?
>>>>>>> >>>
>>>>>>> >>> Informatio:
>>>>>>> >>> arm-dell.dpdklab.iol.unh.edu
>>>>>>> >>> - dts - located in /opt/dts
>>>>>>> >>> - Trex - located in /opt/trex/v2.87
>>>>>>> >>>
>>>>>>> >>> arm-gigabyte.dpdklab.iol.unh.edu
>>>>>>> >>> - dpdk - located in /root/dpdk
>>>>>>> >>>
>>>>>>> >>>
>>>>>>> >>> Thanks,
>>>>>>> >>> David
>>>>>>> >>>
>>>>>>> >>> On Tue, Jan 19, 2021 at 5:20 PM Ajit Khaparde <
>>>>>>> ajit.khaparde@broadcom.com> wrote:
>>>>>>> >>>>
>>>>>>> >>>> Hi David,
>>>>>>> >>>> Thanks for pinging me. Do you think I could login into the
>>>>>>> setup and
>>>>>>> >>>> see what is happening?
>>>>>>> >>>> I do have the credentials for two systems in your lab -
>>>>>>> >>>> rhea.dpdklab.iol.unh.edu and io.dpdklab.iol.unh.edu
>>>>>>> >>>> If you can provide me details of the systems you are trying to
>>>>>>> >>>> configure, I could take a look.
>>>>>>> >>>>
>>>>>>> >>>> Thanks
>>>>>>> >>>> Ajit
>>>>>>> >>>>
>>>>>>> >>>> On Tue, Jan 19, 2021 at 1:41 PM David Liu <dliu@iol.unh.edu>
>>>>>>> wrote:
>>>>>>> >>>> >
>>>>>>> >>>> > Hi Ajit,
>>>>>>> >>>> >
>>>>>>> >>>> > Thank you for helping out.
>>>>>>> >>>> >
>>>>>>> >>>> > How are you doing with this issue?
>>>>>>> >>>> >
>>>>>>> >>>> > Please let me know if you need anything information from us.
>>>>>>> >>>> >
>>>>>>> >>>> > Just some extra information that both Trex and dts are on the
>>>>>>> same intel tester machine.
>>>>>>> >>>> >
>>>>>>> >>>> > Best,
>>>>>>> >>>> > David
>>>>>>> >>>> >
>>>>>>> >>>> > On Thu, Jan 14, 2021 at 2:12 PM David Liu <dliu@iol.unh.edu>
>>>>>>> wrote:
>>>>>>> >>>> >>
>>>>>>> >>>> >> Yes, so this is the same NIC work on x86.
>>>>>>> >>>> >> By seeing the link, I am assuming you mean the ports that
>>>>>>> are using for Trex. If so they are UP before I start the Trex.
>>>>>>> >>>> >>
>>>>>>> >>>> >> Thank,
>>>>>>> >>>> >> David
>>>>>>> >>>> >>
>>>>>>> >>>> >>
>>>>>>> >>>> >> On Thu, Jan 14, 2021 at 1:11 AM Ajit Khaparde <
>>>>>>> ajit.khaparde@broadcom.com> wrote:
>>>>>>> >>>> >>>
>>>>>>> >>>> >>> Does the same NIC work on x86?
>>>>>>> >>>> >>> Also do you see link before you start the trex? I am trying
>>>>>>> to see if the port failed to successfully come up
>>>>>>> >>>> >>> or if there is a problem with the link. Can you check and
>>>>>>> tell?
>>>>>>> >>>> >>>
>>>>>>> >>>> >>> Thanks
>>>>>>> >>>> >>> Ajit
>>>>>>> >>>> >>>
>>>>>>> >>>> >>> On Wed, Jan 13, 2021 at 4:20 PM David Liu <dliu@iol.unh.edu>
>>>>>>> wrote:
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>> Hi Ajit,
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>> Thank you for helping out.
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>> We have it working on the x86, but not the Arm.
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>> Thanks,
>>>>>>> >>>> >>>> David
>>>>>>> >>>> >>>>
>>>>>>> >>>> >>>> On Wed, Jan 13, 2021 at 5:34 PM Ajit Khaparde <
>>>>>>> ajit.khaparde@broadcom.com> wrote:
>>>>>>> >>>> >>>>>
>>>>>>> >>>> >>>>> Hi David,
>>>>>>> >>>> >>>>> I will take a look.
>>>>>>> >>>> >>>>> Do you see similar issues on x86? I am asking because
>>>>>>> >>>> >>>>> even I would start with that to create a baseline and then
>>>>>>> >>>> >>>>> attempt on ARM.
>>>>>>> >>>> >>>>>
>>>>>>> >>>> >>>>> Thanks
>>>>>>> >>>> >>>>> Ajit
>>>>>>> >>>> >>>>>
>>>>>>> >>>> >>>>> On Wed, Jan 13, 2021 at 12:08 PM David Liu <
>>>>>>> dliu@iol.unh.edu> wrote:
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> Hi Ajit,
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> We have a 25G Broadcom NIC that is installed on an Arm
>>>>>>> machine.
>>>>>>> >>>> >>>>>> And I am running into a problem when I try to run
>>>>>>> nic_single_core_perf on the NIC.
>>>>>>> >>>> >>>>>> Currently, we are using: Trex v2.86 and dts from
>>>>>>> http://git.dpdk.org/tools/dts/
>>>>>>> >>>> >>>>>> All the NICs are up and running when testing.
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> The problem is an error when I try to run the test case
>>>>>>> inside the nic_single_core_perf:
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>> TestNicSingleCorePerf: Test running at parameters:
>>>>>>> framesize: 64, rxd/txd: 512
>>>>>>> >>>> >>>>>>>                dut.172.18.0.41:
>>>>>>> x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32,33 -n 4
>>>>>>> --file-prefix=dpdk_15311_20210113190237   -a 0000:93:00.0 -a 0000:93:00.1
>>>>>>> -- -i --portmask=0x3 --txd=512 --rxd=512 --nb-cores=1
>>>>>>> >>>> >>>>>>>                dut.172.18.0.41: start
>>>>>>> >>>> >>>>>>>          TestNicSingleCorePerf: Test Case
>>>>>>> test_perf_nic_single_core Result ERROR: Traceback (most recent call last):
>>>>>>> >>>> >>>>>>>   File "/opt/dts/framework/test_case.py", line 319, in
>>>>>>> _execute_test_case
>>>>>>> >>>> >>>>>>>     case_obj()
>>>>>>> >>>> >>>>>>>   File "tests/TestSuite_nic_single_core_perf.py", line
>>>>>>> 196, in test_perf_nic_single_core
>>>>>>> >>>> >>>>>>>     self.perf_test(self.nb_ports)
>>>>>>> >>>> >>>>>>>   File "tests/TestSuite_nic_single_core_perf.py", line
>>>>>>> 270, in perf_test
>>>>>>> >>>> >>>>>>>     _, packets_received =
>>>>>>> self.tester.pktgen.measure_throughput(stream_ids=streams,
>>>>>>> options=traffic_opt)
>>>>>>> >>>> >>>>>>>   File "/opt/dts/framework/pktgen_base.py", line 245,
>>>>>>> in measure_throughput
>>>>>>> >>>> >>>>>>>     self._prepare_transmission(stream_ids=stream_ids)
>>>>>>> >>>> >>>>>>>   File "/opt/dts/framework/pktgen_trex.py", line 778,
>>>>>>> in _prepare_transmission
>>>>>>> >>>> >>>>>>>     self._conn.reset(ports=self._ports)
>>>>>>> >>>> >>>>>>>   File
>>>>>>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
>>>>>>> line 51, in wrap2
>>>>>>> >>>> >>>>>>>     ret = f(*args, **kwargs)
>>>>>>> >>>> >>>>>>>   File
>>>>>>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
>>>>>>> line 339, in reset
>>>>>>> >>>> >>>>>>>     self.clear_stats(ports)
>>>>>>> >>>> >>>>>>>   File
>>>>>>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
>>>>>>> line 51, in wrap2
>>>>>>> >>>> >>>>>>>     ret = f(*args, **kwargs)
>>>>>>> >>>> >>>>>>>   File
>>>>>>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
>>>>>>> line 1492, in clear_stats
>>>>>>> >>>> >>>>>>>     self._clear_stats_common(ports, clear_global,
>>>>>>> clear_xstats)
>>>>>>> >>>> >>>>>>>   File
>>>>>>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_client.py",
>>>>>>> line 2876, in _clear_stats_common
>>>>>>> >>>> >>>>>>>     raise TRexError(rc)
>>>>>>> >>>> >>>>>>> trex.common.trex_exceptions.TRexError: *** [RPC] -
>>>>>>> Failed to get server response from tcp://172.18.0.40:4501
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> I also try to run TRex in stateless mode with./t-rex-64
>>>>>>> -i --cfg /etc/trex_cfg.yaml and  connect with ./trex-console
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> Then start sending traffic with command
>>>>>>> >>>> >>>>>>>
>>>>>>> >>>> >>>>>>> trex>start -f stl/imix.py
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> But this will cause an error to turn off Trex.
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>> trex>
>>>>>>> >>>> >>>>>>> 2021-01-13 19:56:21 - [server][warning]  - Server has
>>>>>>> been shutdown - cause: 'WATCHDOG: task 'Trex DP core 1' has not responded
>>>>>>> for more than 1.00135 seconds - timeout is 1 seconds
>>>>>>> >>>> >>>>>>> *** traceback follows ***
>>>>>>> >>>> >>>>>>> 1       0x561be173cf5a ./_t-rex-64(+0x19af5a)
>>>>>>> [0x561be173cf5a]
>>>>>>> >>>> >>>>>>> 2       0x7feea3ac0980
>>>>>>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x12980) [0x7feea3ac0980]
>>>>>>> >>>> >>>>>>> 3       0x561be1a05a2a rte_delay_us_block + 106
>>>>>>> >>>> >>>>>>> 4       0x561be16ce874
>>>>>>> CCoreEthIF::send_burst(CCorePerPort*, unsigned short,
>>>>>>> CVirtualIFPerSideStats*) + 3220
>>>>>>> >>>> >>>>>>> 5       0x561be16abf57 CCoreEthIF::flush_tx_queue() + 31
>>>>>>> >>>> >>>>>>> 6       0x561be171e3d9
>>>>>>> CNodeGenerator::handle_maintenance(CFlowGenListPerThread*) + 265
>>>>>>> >>>> >>>>>>> 7       0x561be171f7ec
>>>>>>> CNodeGenerator::handle_flow_sync(CGenNode*, CFlowGenListPerThread*, bool&)
>>>>>>> + 92
>>>>>>> >>>> >>>>>>> 8       0x561be171fc98
>>>>>>> CNodeGenerator::handle_slow_messages(unsigned char, CGenNode*,
>>>>>>> CFlowGenListPerThread*, bool) + 184
>>>>>>> >>>> >>>>>>> 9       0x561be16cb5f1 int
>>>>>>> CNodeGenerator::flush_file_realtime<23, false>(double, double,
>>>>>>> CFlowGenListPerThread*, double&) + 881
>>>>>>> >>>> >>>>>>> 10      0x561be1905212
>>>>>>> TrexStatelessDpCore::start_scheduler() + 226
>>>>>>> >>>> >>>>>>> 11      0x561be1883ae9 TrexDpCore::start() + 89
>>>>>>> >>>> >>>>>>> 12      0x561be1714113
>>>>>>> CFlowGenListPerThread::start(std::__cxx11::basic_string<char,
>>>>>>> std::char_traits<char>, std::allocator<char> >&, CPreviewMode&) + 115
>>>>>>> >>>> >>>>>>> 13      0x561be16af8dd
>>>>>>> CGlobalTRex::run_in_core(unsigned char) + 487
>>>>>>> >>>> >>>>>>> 14      0x561be16d11ad ./_t-rex-64(+0x12f1ad)
>>>>>>> [0x561be16d11ad]
>>>>>>> >>>> >>>>>>> 15      0x561be1a1dfaa eal_thread_loop + 426
>>>>>>> >>>> >>>>>>> 16      0x7feea3ab56db
>>>>>>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7feea3ab56db]
>>>>>>> >>>> >>>>>>> 17      0x7feea2a8571f clone + 63
>>>>>>> >>>> >>>>>>>
>>>>>>> >>>> >>>>>>> *** addr2line information follows ***
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> ??:0
>>>>>>> >>>> >>>>>>> '
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> I believe if everything is working, this should not turn
>>>>>>> off trex but please correct me if I am wrong.
>>>>>>> >>>> >>>>>> I wonder if you have any suggestion of how I can
>>>>>>> approach this issue?
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>> Best,
>>>>>>> >>>> >>>>>> David
>>>>>>> >>>> >>>>>>
>>>>>>> >>>> >>>>>>
>>>>>>>
>>>>>>

[-- Attachment #1.2: Type: text/html, Size: 25735 bytes --]

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4175 bytes --]