Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom NIC in Arm hardware

[Ajit Khaparde <ajit.khaparde@broadcom.com>]

[-- Attachment #1.1: Type: text/plain, Size: 31795 bytes --]

Hi David,
Yes. The changes are in the tree.
Let's try to rerun the test and see what happens.

Thanks
Ajit


On Thu, Apr 1, 2021 at 10:09 AM David Liu <dliu@iol.unh.edu> wrote:

> Hi Ajit,
>
> I think the patch should be in the main tree by now.
>
> Can you check if that is true?
>
> Just checking, is this patch related to the Trex mapping issue?
>
> Best,
> David
>
> On Tue, Mar 16, 2021 at 11:43 AM Ajit Khaparde <ajit.khaparde@broadcom.com>
> wrote:
>
>> Hi David,
>> The patch was in dpdk-next-net.
>> Let me check if it was applied in the main tree.
>>
>> Thanks
>> Ajit
>>
>> On Tue, Mar 16, 2021 at 8:32 AM David Liu <dliu@iol.unh.edu> wrote:
>> >
>> > Hi Ajit,
>> >
>> > Here to check in with you to see if the patch gets submitted.
>> >
>> > And for some confirmation, is this fix possibly be a solution to the
>> current issue?
>> >
>> > Best,
>> > David
>> >
>> > On Thu, Mar 11, 2021 at 12:05 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >>
>> >> David,
>> >> While testing with TREX, we have one identified one fix.
>> >> We will try to submit it to the mailing list tomorrow.
>> >> Once it gets merged, I will get back to you for the setup.
>> >>
>> >> Thanks
>> >> Ajit
>> >>
>> >> On Thu, Mar 11, 2021 at 6:02 AM David Liu <dliu@iol.unh.edu> wrote:
>> >> >
>> >> > Hi Ajit,
>> >> >
>> >> > Thank you.
>> >> >
>> >> > Please let me know when you need to take over the machine again.
>> >> >
>> >> > Best,
>> >> > David
>> >> >
>> >> > On Tue, Mar 9, 2021 at 2:01 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >>
>> >> >> David,
>> >> >> The tool has issues when I load the kernel module.
>> >> >> I am looking for another alternative.
>> >> >> Please go ahead and take back the setup.
>> >> >>
>> >> >> Thanks
>> >> >> Ajit
>> >> >>
>> >> >> On Tue, Mar 9, 2021 at 8:56 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> >
>> >> >> > Hi David,
>> >> >> > I am about to login into the setup and try something.
>> >> >> > I will let you know once I am done and then you can take control.
>> >> >> >
>> >> >> > Thanks
>> >> >> > Ajit
>> >> >> >
>> >> >> > On Tue, Mar 9, 2021 at 6:24 AM David Liu <dliu@iol.unh.edu>
>> wrote:
>> >> >> > >
>> >> >> > > Hi Ajit,
>> >> >> > >
>> >> >> > > Thank for the update.
>> >> >> > >
>> >> >> > > May I know if I can enable testing or would you like more time
>> to look into this?
>> >> >> > >
>> >> >> > > Best,
>> >> >> > > David
>> >> >> > >
>> >> >> > > On Sun, Mar 7, 2021 at 8:07 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>
>> >> >> > >> David,
>> >> >> > >> I did spend some time on this. For now I can't tell what is
>> wrong.
>> >> >> > >> But I want to update the firmware on the card to take another
>> shot at it.
>> >> >> > >> Since this is an ARM based server, I will have to find a way
>> to update the firmware.
>> >> >> > >> IIRC our tools are mostly x86 based. So I am looking around.
>> >> >> > >> I will update you soon.
>> >> >> > >>
>> >> >> > >> Thanks
>> >> >> > >> Ajit
>> >> >> > >>
>> >> >> > >> On Fri, Mar 5, 2021 at 2:06 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>
>> >> >> > >>> Hi David,
>> >> >> > >>> That's a good idea. That way you don't have to watch out for
>> my email requesting to stop the tests.
>> >> >> > >>>
>> >> >> > >>> Thanks
>> >> >> > >>> Ajit
>> >> >> > >>>
>> >> >> > >>> On Fri, Mar 5, 2021 at 1:29 PM David Liu <dliu@iol.unh.edu>
>> wrote:
>> >> >> > >>>>
>> >> >> > >>>> Hi Ajit, Juraj,
>> >> >> > >>>>
>> >> >> > >>>> For simplicity, we will keep the functional and performance
>> testing disable during the weekend.
>> >> >> > >>>>
>> >> >> > >>>> In this way, you will have no testing interfere with you
>> during troubleshooting.
>> >> >> > >>>>
>> >> >> > >>>> Then we will rerun all the jobs that are skipped.
>> >> >> > >>>>
>> >> >> > >>>> Please let me know if you have any questions.
>> >> >> > >>>>
>> >> >> > >>>> Best,
>> >> >> > >>>> David
>> >> >> > >>>>
>> >> >> > >>>> On Wed, Mar 3, 2021 at 4:05 AM Juraj Linkeš
>> <juraj.linkes@pantheon.tech> wrote:
>> >> >> > >>>>>
>> >> >> > >>>>> Hi David, Ajit,
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>> Friday 10am is 4pm for me a that's fine.
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>> Juraj
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>> From: David Liu <dliu@iol.unh.edu>
>> >> >> > >>>>> Sent: Tuesday, March 2, 2021 7:06 PM
>> >> >> > >>>>> To: Ajit Khaparde <ajit.khaparde@broadcom.com>
>> >> >> > >>>>> Cc: Juraj Linkeš <juraj.linkes@pantheon.tech>; Owen
>> Hilyard <ohilyard@iol.unh.edu>; ci@dpdk.org; dpdklab <dpdklab@iol.unh.edu
>> >
>> >> >> > >>>>> Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G Broadcom
>> NIC in Arm hardware
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>> Hi, Ajit
>> >> >> > >>>>> I changed it to Friday at 10 AM for now.
>> >> >> > >>>>>
>> >> >> > >>>>> We can change again if that doesn't work for Juraj
>> >> >> > >>>>>
>> >> >> > >>>>> Best,
>> >> >> > >>>>>
>> >> >> > >>>>> David
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>>
>> >> >> > >>>>> On Tue, Mar 2, 2021 at 10:28 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>>
>> >> >> > >>>>> Hi David,
>> >> >> > >>>>> My Thursdays are crazy. Can we do Friday instead?
>> >> >> > >>>>> Juraj, can you make Friday 10AM (Eastern time) call?
>> >> >> > >>>>>
>> >> >> > >>>>> Thanks
>> >> >> > >>>>> Ajit
>> >> >> > >>>>>
>> >> >> > >>>>> On Tue, Mar 2, 2021 at 6:29 AM David Liu <dliu@iol.unh.edu>
>> wrote:
>> >> >> > >>>>> >
>> >> >> > >>>>> > Hi Ajit and Juraj,
>> >> >> > >>>>> >
>> >> >> > >>>>> > I send out an invite for Thursday, Mar 4 at 10:00 AM. But
>> feel free to adjust the time or let me know if there is a better time that
>> works for you.
>> >> >> > >>>>> >
>> >> >> > >>>>> > For me, I can do:
>> >> >> > >>>>> > Tuesday 10:00 AM - 1:00 PM.
>> >> >> > >>>>> > Thursday 10:00 AM - 1:00 PM.
>> >> >> > >>>>> > Friday 10:00 AM - 12:00 PM and 2:00 PM - 5:00 PM
>> >> >> > >>>>> >
>> >> >> > >>>>> > Best,
>> >> >> > >>>>> > David
>> >> >> > >>>>> >
>> >> >> > >>>>> > On Mon, Mar 1, 2021 at 10:12 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >>
>> >> >> > >>>>> >> David,
>> >> >> > >>>>> >> I was busy with a customer issue and could not get to my
>> emails.
>> >> >> > >>>>> >> I am seeing this now. Let me close out any issues
>> needing urgent attention.
>> >> >> > >>>>> >> Let's sync on a suitable time after that.
>> >> >> > >>>>> >>
>> >> >> > >>>>> >> Juraj,
>> >> >> > >>>>> >> Sure. We will add you.
>> >> >> > >>>>> >>
>> >> >> > >>>>> >> Thanks
>> >> >> > >>>>> >> Ajit
>> >> >> > >>>>> >>
>> >> >> > >>>>> >> On Mon, Mar 1, 2021 at 7:00 AM Juraj Linkeš
>> <juraj.linkes@pantheon.tech> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi Ajit, David,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > If you're setting up a call, could you please send me
>> an invite? I'd like to get some insight into the issues on Arm's behalf.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Juraj
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > From: ci <ci-bounces@dpdk.org> On Behalf Of David Liu
>> >> >> > >>>>> >> > Sent: Thursday, February 25, 2021 7:47 PM
>> >> >> > >>>>> >> > To: Ajit Khaparde <ajit.khaparde@broadcom.com>
>> >> >> > >>>>> >> > Cc: Owen Hilyard <ohilyard@iol.unh.edu>; ci@dpdk.org;
>> dpdklab <dpdklab@iol.unh.edu>
>> >> >> > >>>>> >> > Subject: Re: [dpdk-ci] [dpdklab] Re: [DPDKLAB] 25G
>> Broadcom NIC in Arm hardware
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi Ajit,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Sorry for this issue.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > If possible I would like to set up a time where we can
>> do this in a call to help get this solved faster.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Please let me know what would be a good time for you.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Best,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Thu, Feb 25, 2021 at 12:55 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi Ajit,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I changed the permission to allow you to run sudo.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > This should work now.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Let me know if you still have issues.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Best,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Mon, Feb 22, 2021 at 11:11 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I tried the option to use sudo. And that didn't work.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on
>> arm-gigabyte.  This incident will be reported.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > ----
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > sudo su
>> >> >> > >>>>> >> > [sudo] password for ajitkhaparde:
>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell.
>> This incident will be reported.
>> >> >> > >>>>> >> > ajitkhaparde@arm-dell:/opt/dts$ sudo ./dts -s
>> >> >> > >>>>> >> > [sudo] password for ajitkhaparde:
>> >> >> > >>>>> >> > ajitkhaparde is not allowed to run sudo on arm-dell.
>> This incident will be reported.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:03 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Thu, Feb 18, 2021 at 10:01 AM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi Ajit,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > This is likely caused by when dts try to ssh into
>> another machine as a normal user which will prompt you for the password.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > One solution would be "sudo su" as root to run the
>> command line since you should have root access.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Let me try this method first.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > If it does not work, we could try with the public ssh
>> keys.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I will let you know.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Another solution would be to let me add your public
>> ssh key into both machines.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Let me know if this helps.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Best,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 5:48 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks Owen.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > When I run the dts command line suggested, I get the
>> following error.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Traceback (most recent call last):
>> >> >> > >>>>> >> >   File "/opt/dts/framework/ssh_pexpect.py", line 60,
>> in _connect_host
>> >> >> > >>>>> >> >     self.password, original_prompt='[$#>]',
>> password_regex=r'(?i)(?:password:)|(?:passphrase for key)|(?i)(password for
>> .+:)')
>> >> >> > >>>>> >> >   File
>> "/usr/local/lib/python3.6/dist-packages/pexpect/pxssh.py", line 440, in
>> login
>> >> >> > >>>>> >> >     raise ExceptionPxssh('password refused')
>> >> >> > >>>>> >> > pexpect.pxssh.ExceptionPxssh: password refused
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >                                          ^^^^^^^^^^^^^^
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Fri, Feb 12, 2021 at 12:09 PM Owen Hilyard <
>> ohilyard@iol.unh.edu> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hello Ajit,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > There was a misconfiguration in our identity
>> management system. The issue should now be resolved.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Owen Hilyard
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Thu, Feb 11, 2021 at 9:38 PM 'Ajit Khaparde' via
>> dpdklab <dpdklab@iol.unh.edu> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I can use my credentials to login to rhea.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > But the same credentials are not allowing me to login
>> onto the servers you provided.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-gigabyte.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > Connection closed by 172.18.0.41 port 22
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > ssh -l ajitkhaparde arm-dell.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > Connection closed by 172.18.0.40 port 22
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Tue, Feb 9, 2021 at 6:36 AM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi Ajit,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks for the update. Let me know if you need
>> anything from me.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Best,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Sun, Feb 7, 2021 at 11:04 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > David,
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I had some trouble with my system over the past week.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > So I could not login into the setup. I am hoping that
>> my system will be restored early this week
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > I will login into the setup after that.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 10:57 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Hi David,
>> >> >> > >>>>> >> > I actually did miss it. I will take a look.
>> >> >> > >>>>> >> > Thanks for the refresh mail.
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > Thanks
>> >> >> > >>>>> >> > Ajit
>> >> >> > >>>>> >> >
>> >> >> > >>>>> >> > On Tue, Feb 2, 2021 at 8:58 AM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Hi Ajit,
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Ping again in case if you miss the last email.
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Did you have a chance to give it a try on login to
>> the machines?
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Just some notes, we are currently running compile
>> and some performance/functional testing.
>> >> >> > >>>>> >> > > Which it may be hard for you to run dts, so please
>> let me know if you want me to stop these tests for you to debug.
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Step I run:
>> >> >> > >>>>> >> > > CONF="conf_dpdk" ./switch.sh Broadcom   #this is to
>> switch the dts configuration to Broadcom
>> >> >> > >>>>> >> > > ./dts -s
>>                #To start the dts
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Informatio:
>> >> >> > >>>>> >> > > arm-dell.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > > - dts - located in /opt/dts
>> >> >> > >>>>> >> > > - Trex - located in /opt/trex/v2.87
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > arm-gigabyte.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > > - dpdk - located in /root/dpdk
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > Best,
>> >> >> > >>>>> >> > > David
>> >> >> > >>>>> >> > >
>> >> >> > >>>>> >> > > On Tue, Jan 26, 2021 at 4:59 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>
>> >> >> > >>>>> >> > >> Also, I had changed the configuration when I run
>> Broadcom nic.
>> >> >> > >>>>> >> > >> In the dts folder, you can start it with ./dts -s
>> >> >> > >>>>> >> > >>
>> >> >> > >>>>> >> > >> On Tue, Jan 26, 2021 at 4:54 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> Hi Ajit,
>> >> >> > >>>>> >> > >>> Sorry for the late reply.
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> You can ssh into the machine using the same VPN
>> Username and Password.
>> >> >> > >>>>> >> > >>> Can you try and see if that works?
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> Informatio:
>> >> >> > >>>>> >> > >>> arm-dell.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > >>> - dts - located in /opt/dts
>> >> >> > >>>>> >> > >>> - Trex - located in /opt/trex/v2.87
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> arm-gigabyte.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > >>> - dpdk - located in /root/dpdk
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> Thanks,
>> >> >> > >>>>> >> > >>> David
>> >> >> > >>>>> >> > >>>
>> >> >> > >>>>> >> > >>> On Tue, Jan 19, 2021 at 5:20 PM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> > >>>>
>> >> >> > >>>>> >> > >>>> Hi David,
>> >> >> > >>>>> >> > >>>> Thanks for pinging me. Do you think I could login
>> into the setup and
>> >> >> > >>>>> >> > >>>> see what is happening?
>> >> >> > >>>>> >> > >>>> I do have the credentials for two systems in your
>> lab -
>> >> >> > >>>>> >> > >>>> rhea.dpdklab.iol.unh.edu and
>> io.dpdklab.iol.unh.edu
>> >> >> > >>>>> >> > >>>> If you can provide me details of the systems you
>> are trying to
>> >> >> > >>>>> >> > >>>> configure, I could take a look.
>> >> >> > >>>>> >> > >>>>
>> >> >> > >>>>> >> > >>>> Thanks
>> >> >> > >>>>> >> > >>>> Ajit
>> >> >> > >>>>> >> > >>>>
>> >> >> > >>>>> >> > >>>> On Tue, Jan 19, 2021 at 1:41 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > Hi Ajit,
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > Thank you for helping out.
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > How are you doing with this issue?
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > Please let me know if you need anything
>> information from us.
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > Just some extra information that both Trex and
>> dts are on the same intel tester machine.
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > Best,
>> >> >> > >>>>> >> > >>>> > David
>> >> >> > >>>>> >> > >>>> >
>> >> >> > >>>>> >> > >>>> > On Thu, Jan 14, 2021 at 2:12 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>>> >>
>> >> >> > >>>>> >> > >>>> >> Yes, so this is the same NIC work on x86.
>> >> >> > >>>>> >> > >>>> >> By seeing the link, I am assuming you mean the
>> ports that are using for Trex. If so they are UP before I start the Trex.
>> >> >> > >>>>> >> > >>>> >>
>> >> >> > >>>>> >> > >>>> >> Thank,
>> >> >> > >>>>> >> > >>>> >> David
>> >> >> > >>>>> >> > >>>> >>
>> >> >> > >>>>> >> > >>>> >>
>> >> >> > >>>>> >> > >>>> >> On Thu, Jan 14, 2021 at 1:11 AM Ajit Khaparde <
>> ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> > >>>> >>>
>> >> >> > >>>>> >> > >>>> >>> Does the same NIC work on x86?
>> >> >> > >>>>> >> > >>>> >>> Also do you see link before you start the
>> trex? I am trying to see if the port failed to successfully come up
>> >> >> > >>>>> >> > >>>> >>> or if there is a problem with the link. Can
>> you check and tell?
>> >> >> > >>>>> >> > >>>> >>>
>> >> >> > >>>>> >> > >>>> >>> Thanks
>> >> >> > >>>>> >> > >>>> >>> Ajit
>> >> >> > >>>>> >> > >>>> >>>
>> >> >> > >>>>> >> > >>>> >>> On Wed, Jan 13, 2021 at 4:20 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>> Hi Ajit,
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>> Thank you for helping out.
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>> We have it working on the x86, but not the
>> Arm.
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>> Thanks,
>> >> >> > >>>>> >> > >>>> >>>> David
>> >> >> > >>>>> >> > >>>> >>>>
>> >> >> > >>>>> >> > >>>> >>>> On Wed, Jan 13, 2021 at 5:34 PM Ajit
>> Khaparde <ajit.khaparde@broadcom.com> wrote:
>> >> >> > >>>>> >> > >>>> >>>>>
>> >> >> > >>>>> >> > >>>> >>>>> Hi David,
>> >> >> > >>>>> >> > >>>> >>>>> I will take a look.
>> >> >> > >>>>> >> > >>>> >>>>> Do you see similar issues on x86? I am
>> asking because
>> >> >> > >>>>> >> > >>>> >>>>> even I would start with that to create a
>> baseline and then
>> >> >> > >>>>> >> > >>>> >>>>> attempt on ARM.
>> >> >> > >>>>> >> > >>>> >>>>>
>> >> >> > >>>>> >> > >>>> >>>>> Thanks
>> >> >> > >>>>> >> > >>>> >>>>> Ajit
>> >> >> > >>>>> >> > >>>> >>>>>
>> >> >> > >>>>> >> > >>>> >>>>> On Wed, Jan 13, 2021 at 12:08 PM David Liu <
>> dliu@iol.unh.edu> wrote:
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> Hi Ajit,
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> We have a 25G Broadcom NIC that is
>> installed on an Arm machine.
>> >> >> > >>>>> >> > >>>> >>>>>> And I am running into a problem when I try
>> to run nic_single_core_perf on the NIC.
>> >> >> > >>>>> >> > >>>> >>>>>> Currently, we are using: Trex v2.86 and
>> dts from http://git.dpdk.org/tools/dts/
>> >> >> > >>>>> >> > >>>> >>>>>> All the NICs are up and running when
>> testing.
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> The problem is an error when I try to run
>> the test case inside the nic_single_core_perf:
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>> TestNicSingleCorePerf: Test running at
>> parameters: framesize: 64, rxd/txd: 512
>> >> >> > >>>>> >> > >>>> >>>>>>>                dut.172.18.0.41:
>> x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 32,33 -n 4
>> --file-prefix=dpdk_15311_20210113190237   -a 0000:93:00.0 -a 0000:93:00.1
>> -- -i --portmask=0x3 --txd=512 --rxd=512 --nb-cores=1
>> >> >> > >>>>> >> > >>>> >>>>>>>                dut.172.18.0.41: start
>> >> >> > >>>>> >> > >>>> >>>>>>>          TestNicSingleCorePerf: Test Case
>> test_perf_nic_single_core Result ERROR: Traceback (most recent call last):
>> >> >> > >>>>> >> > >>>> >>>>>>>   File "/opt/dts/framework/test_case.py",
>> line 319, in _execute_test_case
>> >> >> > >>>>> >> > >>>> >>>>>>>     case_obj()
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "tests/TestSuite_nic_single_core_perf.py", line 196, in
>> test_perf_nic_single_core
>> >> >> > >>>>> >> > >>>> >>>>>>>     self.perf_test(self.nb_ports)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "tests/TestSuite_nic_single_core_perf.py", line 270, in perf_test
>> >> >> > >>>>> >> > >>>> >>>>>>>     _, packets_received =
>> self.tester.pktgen.measure_throughput(stream_ids=streams,
>> options=traffic_opt)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/dts/framework/pktgen_base.py", line 245, in measure_throughput
>> >> >> > >>>>> >> > >>>> >>>>>>>
>>  self._prepare_transmission(stream_ids=stream_ids)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/dts/framework/pktgen_trex.py", line 778, in _prepare_transmission
>> >> >> > >>>>> >> > >>>> >>>>>>>     self._conn.reset(ports=self._ports)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
>> line 51, in wrap2
>> >> >> > >>>>> >> > >>>> >>>>>>>     ret = f(*args, **kwargs)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
>> line 339, in reset
>> >> >> > >>>>> >> > >>>> >>>>>>>     self.clear_stats(ports)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_api_annotators.py",
>> line 51, in wrap2
>> >> >> > >>>>> >> > >>>> >>>>>>>     ret = f(*args, **kwargs)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/stl/trex_stl_client.py",
>> line 1492, in clear_stats
>> >> >> > >>>>> >> > >>>> >>>>>>>     self._clear_stats_common(ports,
>> clear_global, clear_xstats)
>> >> >> > >>>>> >> > >>>> >>>>>>>   File
>> "/opt/trex/v2.86/automation/trex_control_plane/interactive/trex/common/trex_client.py",
>> line 2876, in _clear_stats_common
>> >> >> > >>>>> >> > >>>> >>>>>>>     raise TRexError(rc)
>> >> >> > >>>>> >> > >>>> >>>>>>> trex.common.trex_exceptions.TRexError:
>> *** [RPC] - Failed to get server response from tcp://172.18.0.40:4501
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> I also try to run TRex in stateless mode
>> with./t-rex-64 -i --cfg /etc/trex_cfg.yaml and  connect with ./trex-console
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> Then start sending traffic with command
>> >> >> > >>>>> >> > >>>> >>>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>> trex>start -f stl/imix.py
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> But this will cause an error to turn off
>> Trex.
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>> trex>
>> >> >> > >>>>> >> > >>>> >>>>>>> 2021-01-13 19:56:21 - [server][warning]
>> - Server has been shutdown - cause: 'WATCHDOG: task 'Trex DP core 1' has
>> not responded for more than 1.00135 seconds - timeout is 1 seconds
>> >> >> > >>>>> >> > >>>> >>>>>>> *** traceback follows ***
>> >> >> > >>>>> >> > >>>> >>>>>>> 1       0x561be173cf5a
>> ./_t-rex-64(+0x19af5a) [0x561be173cf5a]
>> >> >> > >>>>> >> > >>>> >>>>>>> 2       0x7feea3ac0980
>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x12980) [0x7feea3ac0980]
>> >> >> > >>>>> >> > >>>> >>>>>>> 3       0x561be1a05a2a rte_delay_us_block
>> + 106
>> >> >> > >>>>> >> > >>>> >>>>>>> 4       0x561be16ce874
>> CCoreEthIF::send_burst(CCorePerPort*, unsigned short,
>> CVirtualIFPerSideStats*) + 3220
>> >> >> > >>>>> >> > >>>> >>>>>>> 5       0x561be16abf57
>> CCoreEthIF::flush_tx_queue() + 31
>> >> >> > >>>>> >> > >>>> >>>>>>> 6       0x561be171e3d9
>> CNodeGenerator::handle_maintenance(CFlowGenListPerThread*) + 265
>> >> >> > >>>>> >> > >>>> >>>>>>> 7       0x561be171f7ec
>> CNodeGenerator::handle_flow_sync(CGenNode*, CFlowGenListPerThread*, bool&)
>> + 92
>> >> >> > >>>>> >> > >>>> >>>>>>> 8       0x561be171fc98
>> CNodeGenerator::handle_slow_messages(unsigned char, CGenNode*,
>> CFlowGenListPerThread*, bool) + 184
>> >> >> > >>>>> >> > >>>> >>>>>>> 9       0x561be16cb5f1 int
>> CNodeGenerator::flush_file_realtime<23, false>(double, double,
>> CFlowGenListPerThread*, double&) + 881
>> >> >> > >>>>> >> > >>>> >>>>>>> 10      0x561be1905212
>> TrexStatelessDpCore::start_scheduler() + 226
>> >> >> > >>>>> >> > >>>> >>>>>>> 11      0x561be1883ae9
>> TrexDpCore::start() + 89
>> >> >> > >>>>> >> > >>>> >>>>>>> 12      0x561be1714113
>> CFlowGenListPerThread::start(std::__cxx11::basic_string<char,
>> std::char_traits<char>, std::allocator<char> >&, CPreviewMode&) + 115
>> >> >> > >>>>> >> > >>>> >>>>>>> 13      0x561be16af8dd
>> CGlobalTRex::run_in_core(unsigned char) + 487
>> >> >> > >>>>> >> > >>>> >>>>>>> 14      0x561be16d11ad
>> ./_t-rex-64(+0x12f1ad) [0x561be16d11ad]
>> >> >> > >>>>> >> > >>>> >>>>>>> 15      0x561be1a1dfaa eal_thread_loop +
>> 426
>> >> >> > >>>>> >> > >>>> >>>>>>> 16      0x7feea3ab56db
>> /lib/x86_64-linux-gnu/libpthread.so.0(+0x76db) [0x7feea3ab56db]
>> >> >> > >>>>> >> > >>>> >>>>>>> 17      0x7feea2a8571f clone + 63
>> >> >> > >>>>> >> > >>>> >>>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>> *** addr2line information follows ***
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> ??:0
>> >> >> > >>>>> >> > >>>> >>>>>>> '
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> I believe if everything is working, this
>> should not turn off trex but please correct me if I am wrong.
>> >> >> > >>>>> >> > >>>> >>>>>> I wonder if you have any suggestion of how
>> I can approach this issue?
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>> Best,
>> >> >> > >>>>> >> > >>>> >>>>>> David
>> >> >> > >>>>> >> > >>>> >>>>>>
>> >> >> > >>>>> >> > >>>> >>>>>>
>>
>

[-- Attachment #1.2: Type: text/html, Size: 63814 bytes --]

[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4218 bytes --]