Re: [EXTERNAL] CN10K Crypto Test Issue

[Hiral Shah <hshah@marvell.com>]

[-- Attachment #1: Type: text/plain, Size: 4432 bytes --]

Hi Cody,

Can you please refer our SDK document? It should have clear instructions. We can sync up if you still have any questions.

Regards,
Hiral
________________________________
From: Cody Cheng <ccheng@iol.unh.edu>
Sent: Friday, December 13, 2024 11:47 AM
To: Gnanesh Kambalu Palanethra <gpalanethra@marvell.com>; Hiral Shah <hshah@marvell.com>
Cc: JogaRao Nartu <njogarao@marvell.com>; Bharath Rajendra <brajendra@marvell.com>; Patrick Robb <probb@iol.unh.edu>; ci@dpdk.org <ci@dpdk.org>
Subject: [EXTERNAL] CN10K Crypto Test Issue

Hi Gnanesh & Hiral, My name is Cody Cheng, I'm a tester at the University of New Hampshire DPDK Community Test Lab. We are hosting a CN10K board here which is currently running some ethernet device tests on DPDK, and we would like to extend


Hi Gnanesh & Hiral,

My name is Cody Cheng, I'm a tester at the University of New Hampshire
DPDK Community Test Lab. We are hosting a CN10K board here which is
currently running some ethernet device tests on DPDK, and we would
like to extend our testing to include crypto device testing. Gnanesh
has written a patch which adds testcases to the DPDK Test Suite which
should allow us to do so.

However, I am running into difficulties with the crypto devices I
create in DPDK from the CN10K board. I would appreciate it if I can
sync with one of you next week so that I can show our current
configuration, and run through the DPDK crypto device setup process
and CN10K autotest (not passing currently). I am guessing there is
some error in our configuration. My coworker Patrick Robb has
mentioned he met with Hiral previously and it was a big help for
understanding how to flash the correct firmware, build the SDK and
tftpboot it, chroot to Ubuntu etc. I hope we can do something similar
to clear up the confusion regarding crypto devs. What timezones are
you in? I would be happy to schedule a Zoom call.

Otherwise, I will share some of the system info and the process I have
run through below, which might begin to give you an idea regarding our
status:

=======================
Marvell CN10k Boot Stub
=======================
Firmware Version: 2024-12-07 02:04:42
EBF Version: 12.24.11, Branch:
/MarvellSDK/base-SDK12.24.11/cn10ka-release-output/build/marvell-external-fw-SDK12.24.11/firmware/ebf,
Built: Sat, 07 Dec 2024 02:02:27 +0000

Board Model:    crb106
Board Revision: r1p1
Board Serial:   <redacted>

Chip:  0xb9 Pass A1
SKU:   MV-CN10624-A1-AAP
LLC:   49152 KB
Boot:  SPI1_CS0,EMMC_CS0, using SPI1_CS0
AVS:   Enabled

I am setting up 1 crypto virtual function using the commands here:
https://urldefense.proofpoint.com/v2/url?u=https-3A__doc.dpdk.org_guides_cryptodevs_cnxk.html-23initialization&d=DwIBaQ&c=nKjWec2b6R0mOyPaz7xtfQ&r=vGy6A_Vxl0vuken84vHnqSHz1sugoMRzgsw2uuNRAQ4&m=dN2bwgTF6BzuBPsPbKfZfmAua-foxlSSnMAoU8EjwCE3XN40flneiz1d7Mwl83iN&s=_d4kcuFSGcAGResAexjf_pFNDJ0Szm68pM2tw5BFzUM&e=

So afterwards I am left with 1 VF bound to vfio-pci at 0002:10.00.1

At this stage, according to the docs I should be able to launch
dpdk-test and run the cn10k symmetrical crypto autotest, using the
commands below:

```
./dpdk-test
RTE>>cryptodev_cn10k_autotest
```

However, the auto tests fail and fall into an error loop which I have
attached the logs of in this email.

Here is the EAL output from the logs:

EAL: Detected CPU lcores: 24
EAL: Detected NUMA nodes: 1
EAL: Detected static linkage of DPDK
EAL: Multi-process socket /var/run/dpdk/rte/mp_socket
EAL: Selected IOVA mode 'VA'
EAL: VFIO support initialized
EAL: Using IOMMU type 1 (Type 1)
CNXK: RoC Model: cn10ka_a1 (HW_PLATFORM)
CRYPTODEV: Creating cryptodev 0002:20:00.1
CRYPTODEV: Initialisation parameters - name: 0002:20:00.1,socket id:
0, max queue pairs: 0
APP: HPET is not enabled, using TSC as default timer

In the EAL output, max queue pairs is 0 even though in the docs, it
says the Maximum queue pairs limit is set to a default of 63. Could
this be related to the issue?

Also, here is my kernel cmdline parameters:

console=ttyAMA0,115200n8 earlycon=p1011,0x87e028000000 maxcpus=24
rootwait root=/dev/nvme0n1p1 rw coherent_pool=16M
default_hugepagesz=512M hugepagesz=512M hugepages=8

Does this look correct?

I have also tried setting `iommu.passthrough=1` in the boot arguments
but that resulted in the same dpdk-test failure.

Best Regards,
Cody Cheng


[-- Attachment #2: Type: text/html, Size: 7023 bytes --]