RE: AWS lab meson test fails

["Brandes, Shai" <shaibran@amazon.com>]

[-- Attachment #1: Type: text/plain, Size: 2613 bytes --]

Thanks for the detailed response, adding Wajeeh, who maintains the lab

From: Patrick Robb <probb@iol.unh.edu>
Sent: Thursday, June 12, 2025 3:43 PM
To: Brandes, Shai <shaibran@amazon.com>
Cc: Bruce Richardson <bruce.richardson@intel.com>; ci@dpdk.org
Subject: RE: [EXTERNAL] AWS lab meson test fails


CAUTION: This email originated from outside of the organization. Do not click links or open attachments unless you can confirm the sender and know the content is safe.


Oh, and of course I'll just raise that if the apply failure comes from pw_maintainers_cli.py having guessed the wrong tree, the submitter can always request a rebase and retest on a particular branch (which they can specify) using the testing recheck framework: https://core.dpdk.org/testing/#requesting-a-patch-retest

On Thu, Jun 12, 2025 at 8:38 AM Patrick Robb <probb@iol.unh.edu<mailto:probb@iol.unh.edu>> wrote:
Hi Shai,

On Thu, Jun 12, 2025 at 6:20 AM Brandes, Shai <shaibran@amazon.com<mailto:shaibran@amazon.com>> wrote:
Hi Patrick,

The failure status appears to be due to an issue applying the patch to the release notes RTS file.
We suspect that the patch may have been applied to the incorrect DPDK tree.
Could you advise if there is any specific metadata we should be using to determine the correct tree for applying the patch?

Here is the script which should be used to determine the tree to apply the patchseries to: https://git.dpdk.org/tools/dpdk-ci/tree/tools/pw_maintainers_cli.py

Even better than using that directly, though, is using this create series artifact script, which will handle running pw_maintainers_cli.py and applying the series from patchwork for you: https://git.dpdk.org/tools/dpdk-ci/tree/tools/create_series_artifact.py

The process create_series_artifact.py uses is:

1. Try to apply to the tree suggested by pw_maintainers_cli.py. If successful, proceed.
2. If there was an apply failure in 1, try to apply again, this time on main. If successful, proceed.
3. If 1 and 2 failed, indicate that there was an apply failure.

Also, if your automation failed to apply the patch, the best thing is to report "_apply patch failure_" in your test_report email, and bail out of running testing (so don't run meson test in this case).

And then as a separate matter, I see you mentioned the same sort of .rst apply failure situation was seen on a patch you submitted recently. We do not currently have a strategy for mitigating this, but perhaps we should develop one. Do you have any ideas? I can also raise this discussion during the CI meeting.

Thanks Shai.

[-- Attachment #2: Type: text/html, Size: 6958 bytes --]