DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Jiawen Wu" <jiawenwu@trustnetic.com>
To: "'Andrew Rybchenko'" <andrew.rybchenko@oktetlabs.ru>, <dev@dpdk.org>
Subject: Re: [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type
Date: Tue, 15 Jun 2021 15:13:49 +0800	[thread overview]
Message-ID: <009601d761b5$fd650570$f82f1050$@trustnetic.com> (raw)
In-Reply-To: <3fb089b1-47c0-0be3-d941-31131b27e597@oktetlabs.ru>

On Tuesday, June 15, 2021 1:55 AM, Andrew Rybchenko wrote:
> On 6/2/21 12:40 PM, Jiawen Wu wrote:
> > Add log type and error type to trace functions.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
> > ---
> >   doc/guides/nics/ngbe.rst            |  20 +++++
> >   drivers/net/ngbe/base/ngbe_status.h | 125
> ++++++++++++++++++++++++++++
> >   drivers/net/ngbe/base/ngbe_type.h   |   1 +
> >   drivers/net/ngbe/ngbe_ethdev.c      |  16 ++++
> >   drivers/net/ngbe/ngbe_logs.h        |  46 ++++++++++
> >   5 files changed, 208 insertions(+)
> >   create mode 100644 drivers/net/ngbe/base/ngbe_status.h
> >   create mode 100644 drivers/net/ngbe/ngbe_logs.h
> >
> > diff --git a/doc/guides/nics/ngbe.rst b/doc/guides/nics/ngbe.rst index
> > 4ec2623a05..c274a15aab 100644
> > --- a/doc/guides/nics/ngbe.rst
> > +++ b/doc/guides/nics/ngbe.rst
> > @@ -15,6 +15,26 @@ Prerequisites
> >
> >   - Follow the DPDK :ref:`Getting Started Guide for Linux <linux_gsg>` to
> setup the basic DPDK environment.
> >
> 
> It should be two empty lines before section start.
> 
> > +Pre-Installation Configuration
> > +------------------------------
> > +
> > +Dynamic Logging Parameters
> > +~~~~~~~~~~~~~~~~~~~~~~~~~~
> > +
> > +One may leverage EAL option "--log-level" to change default levels
> > +for the log types supported by the driver. The option is used with an
> > +argument typically consisting of two parts separated by a colon.
> > +
> > +NGBE PMD provides the following log types available for control:
> > +
> > +- ``pmd.net.ngbe.driver`` (default level is **notice**)
> > +
> > +  Affects driver-wide messages unrelated to any particular devices.
> > +
> > +- ``pmd.net.ngbe.init`` (default level is **notice**)
> > +
> > +  Extra logging of the messages during PMD initialization.
> > +
> 
> Same here.
> 
> >   Driver compilation and testing
> >   ------------------------------
> >
> > diff --git a/drivers/net/ngbe/base/ngbe_status.h
> > b/drivers/net/ngbe/base/ngbe_status.h
> > new file mode 100644
> > index 0000000000..b1836c6479
> > --- /dev/null
> > +++ b/drivers/net/ngbe/base/ngbe_status.h
> > @@ -0,0 +1,125 @@
> > +/* SPDX-License-Identifier: BSD-3-Clause
> > + * Copyright(c) 2018-2020 Beijing WangXun Technology Co., Ltd.
> > + * Copyright(c) 2010-2017 Intel Corporation  */
> > +
> > +#ifndef _NGBE_STATUS_H_
> > +#define _NGBE_STATUS_H_
> > +
> > +/* Error Codes:
> > + * common error
> > + * module error(simple)
> > + * module error(detailed)
> > + *
> > + * (-256, 256): reserved for non-ngbe defined error code  */ #define
> > +TERR_BASE (0x100) enum ngbe_error {
> > +	TERR_NULL = TERR_BASE,
> > +	TERR_ANY,
> > +	TERR_NOSUPP,
> > +	TERR_NOIMPL,
> > +	TERR_NOMEM,
> > +	TERR_NOSPACE,
> > +	TERR_NOENTRY,
> > +	TERR_CONFIG,
> > +	TERR_ARGS,
> > +	TERR_PARAM,
> > +	TERR_INVALID,
> > +	TERR_TIMEOUT,
> > +	TERR_VERSION,
> > +	TERR_REGISTER,
> > +	TERR_FEATURE,
> > +	TERR_RESET,
> > +	TERR_AUTONEG,
> > +	TERR_MBX,
> > +	TERR_I2C,
> > +	TERR_FC,
> > +	TERR_FLASH,
> > +	TERR_DEVICE,
> > +	TERR_HOSTIF,
> > +	TERR_SRAM,
> > +	TERR_EEPROM,
> > +	TERR_EEPROM_CHECKSUM,
> > +	TERR_EEPROM_PROTECT,
> > +	TERR_EEPROM_VERSION,
> > +	TERR_MAC,
> > +	TERR_MAC_ADDR,
> > +	TERR_SFP,
> > +	TERR_SFP_INITSEQ,
> > +	TERR_SFP_PRESENT,
> > +	TERR_SFP_SUPPORT,
> > +	TERR_SFP_SETUP,
> > +	TERR_PHY,
> > +	TERR_PHY_ADDR,
> > +	TERR_PHY_INIT,
> > +	TERR_FDIR_CMD,
> > +	TERR_FDIR_REINIT,
> > +	TERR_SWFW_SYNC,
> > +	TERR_SWFW_COMMAND,
> > +	TERR_FC_CFG,
> > +	TERR_FC_NEGO,
> > +	TERR_LINK_SETUP,
> > +	TERR_PCIE_PENDING,
> > +	TERR_PBA_SECTION,
> > +	TERR_OVERTEMP,
> > +	TERR_UNDERTEMP,
> > +	TERR_XPCS_POWERUP,
> > +};
> > +
> > +/* WARNING: just for legacy compatibility */ #define
> > +NGBE_NOT_IMPLEMENTED 0x7FFFFFFF
> > +#define NGBE_ERR_OPS_DUMMY   0x3FFFFFFF
> > +
> > +/* Error Codes */
> > +#define NGBE_ERR_EEPROM				-(TERR_BASE + 1)
> > +#define NGBE_ERR_EEPROM_CHECKSUM		-(TERR_BASE + 2)
> > +#define NGBE_ERR_PHY				-(TERR_BASE + 3)
> > +#define NGBE_ERR_CONFIG				-(TERR_BASE + 4)
> > +#define NGBE_ERR_PARAM				-(TERR_BASE + 5)
> > +#define NGBE_ERR_MAC_TYPE			-(TERR_BASE + 6)
> > +#define NGBE_ERR_UNKNOWN_PHY			-(TERR_BASE + 7)
> > +#define NGBE_ERR_LINK_SETUP			-(TERR_BASE + 8)
> > +#define NGBE_ERR_ADAPTER_STOPPED		-(TERR_BASE + 9)
> > +#define NGBE_ERR_INVALID_MAC_ADDR		-(TERR_BASE + 10)
> > +#define NGBE_ERR_DEVICE_NOT_SUPPORTED		-(TERR_BASE + 11)
> > +#define NGBE_ERR_MASTER_REQUESTS_PENDING	-(TERR_BASE + 12)
> > +#define NGBE_ERR_INVALID_LINK_SETTINGS		-(TERR_BASE + 13)
> > +#define NGBE_ERR_AUTONEG_NOT_COMPLETE		-(TERR_BASE + 14)
> > +#define NGBE_ERR_RESET_FAILED			-(TERR_BASE + 15)
> > +#define NGBE_ERR_SWFW_SYNC			-(TERR_BASE + 16)
> > +#define NGBE_ERR_PHY_ADDR_INVALID		-(TERR_BASE + 17)
> > +#define NGBE_ERR_I2C				-(TERR_BASE + 18)
> > +#define NGBE_ERR_SFP_NOT_SUPPORTED		-(TERR_BASE + 19)
> > +#define NGBE_ERR_SFP_NOT_PRESENT		-(TERR_BASE + 20)
> > +#define NGBE_ERR_SFP_NO_INIT_SEQ_PRESENT	-(TERR_BASE + 21)
> > +#define NGBE_ERR_NO_SAN_ADDR_PTR		-(TERR_BASE + 22)
> > +#define NGBE_ERR_FDIR_REINIT_FAILED		-(TERR_BASE + 23)
> > +#define NGBE_ERR_EEPROM_VERSION			-(TERR_BASE + 24)
> > +#define NGBE_ERR_NO_SPACE			-(TERR_BASE + 25)
> > +#define NGBE_ERR_OVERTEMP			-(TERR_BASE + 26)
> > +#define NGBE_ERR_FC_NOT_NEGOTIATED		-(TERR_BASE + 27)
> > +#define NGBE_ERR_FC_NOT_SUPPORTED		-(TERR_BASE + 28)
> > +#define NGBE_ERR_SFP_SETUP_NOT_COMPLETE		-(TERR_BASE + 30)
> > +#define NGBE_ERR_PBA_SECTION			-(TERR_BASE + 31)
> > +#define NGBE_ERR_INVALID_ARGUMENT		-(TERR_BASE + 32)
> > +#define NGBE_ERR_HOST_INTERFACE_COMMAND		-(TERR_BASE + 33)
> > +#define NGBE_ERR_OUT_OF_MEM			-(TERR_BASE + 34)
> > +#define NGBE_ERR_FEATURE_NOT_SUPPORTED		-(TERR_BASE + 36)
> > +#define NGBE_ERR_EEPROM_PROTECTED_REGION	-(TERR_BASE + 37)
> > +#define NGBE_ERR_FDIR_CMD_INCOMPLETE		-(TERR_BASE + 38)
> > +#define NGBE_ERR_FW_RESP_INVALID		-(TERR_BASE + 39)
> > +#define NGBE_ERR_TOKEN_RETRY			-(TERR_BASE + 40)
> > +#define NGBE_ERR_FLASH_LOADING_FAILED		-(TERR_BASE + 41)
> > +
> > +#define NGBE_ERR_NOSUPP                        -(TERR_BASE + 42)
> > +#define NGBE_ERR_UNDERTEMP                     -(TERR_BASE + 43)
> > +#define NGBE_ERR_XPCS_POWER_UP_FAILED          -(TERR_BASE + 44)
> > +#define NGBE_ERR_PHY_INIT_NOT_DONE             -(TERR_BASE + 45)
> > +#define NGBE_ERR_TIMEOUT                       -(TERR_BASE + 46)
> > +#define NGBE_ERR_REGISTER                      -(TERR_BASE + 47)
> > +#define NGBE_ERR_MNG_ACCESS_FAILED             -(TERR_BASE + 49)
> > +#define NGBE_ERR_PHY_TYPE                      -(TERR_BASE + 50)
> > +#define NGBE_ERR_PHY_TIMEOUT                   -(TERR_BASE + 51)
> 
> Not sure that I understand how above define are related to logging.

Above redundant code was not handled properly in the early.
I'll remove enum ngbe_error, and use above macro defines to return different errors.





  reply	other threads:[~2021-06-15  7:13 UTC|newest]

Thread overview: 51+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-06-02  9:40 [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 01/24] net/ngbe: add build and doc infrastructure Jiawen Wu
2021-06-14 17:05   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 02/24] net/ngbe: add device IDs Jiawen Wu
2021-06-14 17:08   ` Andrew Rybchenko
2021-06-15  2:52     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 03/24] net/ngbe: support probe and remove Jiawen Wu
2021-06-14 17:27   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 04/24] net/ngbe: add device init and uninit Jiawen Wu
2021-06-14 17:36   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 05/24] net/ngbe: add log type and error type Jiawen Wu
2021-06-14 17:54   ` Andrew Rybchenko
2021-06-15  7:13     ` Jiawen Wu [this message]
2021-07-01 13:57   ` David Marchand
2021-07-02  2:08     ` Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 06/24] net/ngbe: define registers Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 07/24] net/ngbe: set MAC type and LAN id Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 08/24] net/ngbe: init and validate EEPROM Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 09/24] net/ngbe: add HW initialization Jiawen Wu
2021-06-14 18:01   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 10/24] net/ngbe: identify PHY and reset PHY Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 11/24] net/ngbe: store MAC address Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 12/24] net/ngbe: add info get operation Jiawen Wu
2021-06-14 18:13   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 13/24] net/ngbe: support link update Jiawen Wu
2021-06-14 18:45   ` Andrew Rybchenko
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 14/24] net/ngbe: setup the check PHY link Jiawen Wu
2021-06-02  9:40 ` [dpdk-dev] [PATCH v5 15/24] net/ngbe: add Rx queue setup and release Jiawen Wu
2021-06-14 18:53   ` Andrew Rybchenko
2021-06-15  7:50     ` Jiawen Wu
2021-06-15  8:06       ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 16/24] net/ngbe: add Tx " Jiawen Wu
2021-06-14 18:59   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 17/24] net/ngbe: add Rx and Tx init Jiawen Wu
2021-06-14 19:01   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 18/24] net/ngbe: add packet type Jiawen Wu
2021-06-14 19:06   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 19/24] net/ngbe: add simple Rx and Tx flow Jiawen Wu
2021-06-14 19:10   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 20/24] net/ngbe: support bulk and scatter Rx Jiawen Wu
2021-06-14 19:17   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 21/24] net/ngbe: support full-featured Tx path Jiawen Wu
2021-06-14 19:22   ` Andrew Rybchenko
2021-06-14 19:23     ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 22/24] net/ngbe: add device start operation Jiawen Wu
2021-06-14 19:33   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 23/24] net/ngbe: start and stop RxTx Jiawen Wu
2021-06-14 20:44   ` Andrew Rybchenko
2021-06-02  9:41 ` [dpdk-dev] [PATCH v5 24/24] net/ngbe: add device stop operation Jiawen Wu
2021-06-11  1:38 ` [dpdk-dev] [PATCH v5 00/24] net: ngbe PMD Jiawen Wu
2021-06-14 20:56 ` Andrew Rybchenko

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='009601d761b5$fd650570$f82f1050$@trustnetic.com' \
    --to=jiawenwu@trustnetic.com \
    --cc=andrew.rybchenko@oktetlabs.ru \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).