* [PATCH 0/9] Wangxun fixes and supports
@ 2022-02-08 10:11 Jiawen Wu
2022-02-08 10:11 ` [PATCH 1/9] net/ngbe: fix failed to receive packets Jiawen Wu
` (8 more replies)
0 siblings, 9 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Fixed some bugs for txgbe and ngbe, and support more custom functions.
Jiawen Wu (9):
net/ngbe: fix failed to receive packets
net/ngbe: fix link interrupt sometimes lost
net/ngbe: fix Tx pending
net/ngbe: fix RxTx packet statistics
net/ngbe: optimize the PHY initialization process
net/ngbe: add support to custom PHY interfaces
net: add LED OEM support for wangxun devices
net/txgbe: fix to set link up and down
net/txgbe: fix KR auto-negotiation
doc/guides/rel_notes/release_22_03.rst | 9 ++
drivers/net/ngbe/base/ngbe_devids.h | 12 +-
drivers/net/ngbe/base/ngbe_dummy.h | 9 ++
drivers/net/ngbe/base/ngbe_hw.c | 161 ++++++++++++++++++----
drivers/net/ngbe/base/ngbe_hw.h | 3 +
drivers/net/ngbe/base/ngbe_mng.c | 106 ++++++++++++++
drivers/net/ngbe/base/ngbe_mng.h | 24 ++++
drivers/net/ngbe/base/ngbe_phy.c | 27 ++--
drivers/net/ngbe/base/ngbe_phy.h | 2 +-
drivers/net/ngbe/base/ngbe_phy_mvl.c | 81 +++++++++--
drivers/net/ngbe/base/ngbe_phy_mvl.h | 5 +
drivers/net/ngbe/base/ngbe_phy_rtl.c | 74 ++++++----
drivers/net/ngbe/base/ngbe_phy_yt.c | 182 +++++++++++++++++++++----
drivers/net/ngbe/base/ngbe_phy_yt.h | 19 ++-
drivers/net/ngbe/base/ngbe_regs.h | 51 +++----
drivers/net/ngbe/base/ngbe_type.h | 19 +++
drivers/net/ngbe/ngbe_ethdev.c | 142 ++++++++-----------
drivers/net/ngbe/ngbe_ethdev.h | 1 +
drivers/net/txgbe/base/txgbe_hw.c | 21 +--
drivers/net/txgbe/base/txgbe_mng.c | 69 ++++++++++
drivers/net/txgbe/base/txgbe_mng.h | 7 +
drivers/net/txgbe/base/txgbe_phy.c | 4 +
drivers/net/txgbe/base/txgbe_regs.h | 12 +-
drivers/net/txgbe/txgbe_ethdev.c | 6 +-
24 files changed, 815 insertions(+), 231 deletions(-)
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 1/9] net/ngbe: fix failed to receive packets
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 10:11 ` [PATCH 2/9] net/ngbe: fix link interrupt sometimes lost Jiawen Wu
` (7 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
Initialize Rx packet buffer before starting RxTx, ensure to receive
packets.
Fixes: 62fc35e63d0e ("net/ngbe: support Rx queue start/stop")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_dummy.h | 4 ++++
drivers/net/ngbe/base/ngbe_hw.c | 27 +++++++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_hw.h | 2 ++
drivers/net/ngbe/base/ngbe_type.h | 7 +++++++
drivers/net/ngbe/ngbe_ethdev.c | 1 +
5 files changed, 41 insertions(+)
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index 61b0d82bfb..d74c9f7b54 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -114,6 +114,9 @@ static inline s32 ngbe_mac_get_link_capabilities_dummy(struct ngbe_hw *TUP0,
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline void ngbe_setup_pba_dummy(struct ngbe_hw *TUP0)
+{
+}
static inline s32 ngbe_mac_led_on_dummy(struct ngbe_hw *TUP0, u32 TUP1)
{
return NGBE_ERR_OPS_DUMMY;
@@ -298,6 +301,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->mac.setup_link = ngbe_mac_setup_link_dummy;
hw->mac.check_link = ngbe_mac_check_link_dummy;
hw->mac.get_link_capabilities = ngbe_mac_get_link_capabilities_dummy;
+ hw->mac.setup_pba = ngbe_setup_pba_dummy;
hw->mac.led_on = ngbe_mac_led_on_dummy;
hw->mac.led_off = ngbe_mac_led_off_dummy;
hw->mac.set_rar = ngbe_mac_set_rar_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 0716357725..0b22ea0fb3 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -1609,6 +1609,30 @@ void ngbe_set_mac_anti_spoofing(struct ngbe_hw *hw, bool enable, int vf)
wr32(hw, NGBE_POOLTXASMAC, pfvfspoof);
}
+/**
+ * ngbe_set_pba - Initialize Rx packet buffer
+ * @hw: pointer to hardware structure
+ * @headroom: reserve n KB of headroom
+ **/
+void ngbe_set_pba(struct ngbe_hw *hw)
+{
+ u32 rxpktsize = hw->mac.rx_pb_size;
+ u32 txpktsize, txpbthresh;
+
+ /* Reserve 256 KB of headroom */
+ rxpktsize -= 256;
+
+ rxpktsize <<= 10;
+ wr32(hw, NGBE_PBRXSIZE, rxpktsize);
+
+ /* Only support an equally distributed Tx packet buffer strategy. */
+ txpktsize = NGBE_PBTXSIZE_MAX;
+ txpbthresh = (txpktsize / 1024) - NGBE_TXPKT_SIZE_MAX;
+
+ wr32(hw, NGBE_PBTXSIZE, txpktsize);
+ wr32(hw, NGBE_PBTXDMATH, txpbthresh);
+}
+
/**
* ngbe_set_vlan_anti_spoofing - Enable/Disable VLAN anti-spoofing
* @hw: pointer to hardware structure
@@ -1907,6 +1931,8 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->check_link = ngbe_check_mac_link_em;
mac->setup_link = ngbe_setup_mac_link_em;
+ mac->setup_pba = ngbe_set_pba;
+
/* Manageability interface */
mac->init_thermal_sensor_thresh = ngbe_init_thermal_sensor_thresh;
mac->check_overtemp = ngbe_mac_check_overtemp;
@@ -1928,6 +1954,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
mac->mcft_size = NGBE_EM_MC_TBL_SIZE;
mac->vft_size = NGBE_EM_VFT_TBL_SIZE;
mac->num_rar_entries = NGBE_EM_RAR_ENTRIES;
+ mac->rx_pb_size = NGBE_EM_RX_PB_SIZE;
mac->max_rx_queues = NGBE_EM_MAX_RX_QUEUES;
mac->max_tx_queues = NGBE_EM_MAX_TX_QUEUES;
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index ad7e8fc2d9..b32cf87ff4 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -13,6 +13,7 @@
#define NGBE_EM_RAR_ENTRIES 32
#define NGBE_EM_MC_TBL_SIZE 32
#define NGBE_EM_VFT_TBL_SIZE 128
+#define NGBE_EM_RX_PB_SIZE 42 /*KB*/
s32 ngbe_init_hw(struct ngbe_hw *hw);
s32 ngbe_start_hw(struct ngbe_hw *hw);
@@ -44,6 +45,7 @@ s32 ngbe_update_mc_addr_list(struct ngbe_hw *hw, u8 *mc_addr_list,
ngbe_mc_addr_itr func, bool clear);
s32 ngbe_disable_sec_rx_path(struct ngbe_hw *hw);
s32 ngbe_enable_sec_rx_path(struct ngbe_hw *hw);
+void ngbe_set_pba(struct ngbe_hw *hw);
s32 ngbe_setup_fc_em(struct ngbe_hw *hw);
s32 ngbe_fc_enable(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 12847b7272..269e087d50 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -11,6 +11,9 @@
#define NGBE_FRAME_SIZE_MAX (9728) /* Maximum frame size, +FCS */
#define NGBE_FRAME_SIZE_DFT (1522) /* Default frame size, +FCS */
#define NGBE_NUM_POOL (32)
+#define NGBE_PBRXSIZE_MAX 0x00080000 /* 512KB Packet Buffer */
+#define NGBE_PBTXSIZE_MAX 0x00005000 /* 20KB Packet Buffer */
+#define NGBE_TXPKT_SIZE_MAX 0xA /* Max Tx Packet size */
#define NGBE_MAX_QP (8)
#define NGBE_MAX_UTA 128
@@ -269,6 +272,9 @@ struct ngbe_mac_info {
s32 (*get_link_capabilities)(struct ngbe_hw *hw,
u32 *speed, bool *autoneg);
+ /* Packet Buffer manipulation */
+ void (*setup_pba)(struct ngbe_hw *hw);
+
/* LED */
s32 (*led_on)(struct ngbe_hw *hw, u32 index);
s32 (*led_off)(struct ngbe_hw *hw, u32 index);
@@ -311,6 +317,7 @@ struct ngbe_mac_info {
u32 mcft_size;
u32 vft_size;
u32 num_rar_entries;
+ u32 rx_pb_size;
u32 max_tx_queues;
u32 max_rx_queues;
bool get_link_status;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 0d66c32551..180489ce38 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -1004,6 +1004,7 @@ ngbe_dev_start(struct rte_eth_dev *dev)
goto error;
}
+ hw->mac.setup_pba(hw);
ngbe_configure_port(dev);
err = ngbe_dev_rxtx_start(dev);
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 2/9] net/ngbe: fix link interrupt sometimes lost
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
2022-02-08 10:11 ` [PATCH 1/9] net/ngbe: fix failed to receive packets Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 10:11 ` [PATCH 3/9] net/ngbe: fix Tx pending Jiawen Wu
` (6 subsequent siblings)
8 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
When the port is started and stopped continuously and quickly, one
interrupt cannot be handled in time, which will cause subsequent
interrupts to be lost, so that link status will cannot be updated.
Fixes: b9246b8fa280 ("net/ngbe: support link update")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/ngbe_ethdev.c | 115 +++++++++++----------------------
drivers/net/ngbe/ngbe_ethdev.h | 1 +
2 files changed, 39 insertions(+), 77 deletions(-)
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 180489ce38..8e31234442 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -89,7 +89,6 @@ static int ngbe_dev_macsec_interrupt_setup(struct rte_eth_dev *dev);
static int ngbe_dev_misc_interrupt_setup(struct rte_eth_dev *dev);
static int ngbe_dev_rxq_interrupt_setup(struct rte_eth_dev *dev);
static void ngbe_dev_interrupt_handler(void *param);
-static void ngbe_dev_interrupt_delayed_handler(void *param);
static void ngbe_configure_msix(struct rte_eth_dev *dev);
#define NGBE_SET_HWSTRIP(h, q) do {\
@@ -943,6 +942,9 @@ ngbe_dev_start(struct rte_eth_dev *dev)
PMD_INIT_FUNC_TRACE();
+ /* Stop the link setup handler before resetting the HW. */
+ rte_eal_alarm_cancel(ngbe_dev_setup_link_alarm_handler, dev);
+
/* disable uio/vfio intr/eventfd mapping */
rte_intr_disable(intr_handle);
@@ -1132,6 +1134,8 @@ ngbe_dev_stop(struct rte_eth_dev *dev)
PMD_INIT_FUNC_TRACE();
+ rte_eal_alarm_cancel(ngbe_dev_setup_link_alarm_handler, dev);
+
if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
(hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
/* gpio0 is used to power on/off control*/
@@ -1801,6 +1805,24 @@ ngbe_dev_supported_ptypes_get(struct rte_eth_dev *dev)
return NULL;
}
+void
+ngbe_dev_setup_link_alarm_handler(void *param)
+{
+ struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
+ struct ngbe_hw *hw = ngbe_dev_hw(dev);
+ struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
+ u32 speed;
+ bool autoneg = false;
+
+ speed = hw->phy.autoneg_advertised;
+ if (!speed)
+ hw->mac.get_link_capabilities(hw, &speed, &autoneg);
+
+ hw->mac.setup_link(hw, speed, true);
+
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_CONFIG;
+}
+
/* return 0 means link status changed, -1 means not changed */
int
ngbe_dev_link_update_share(struct rte_eth_dev *dev,
@@ -1838,8 +1860,16 @@ ngbe_dev_link_update_share(struct rte_eth_dev *dev,
return rte_eth_linkstatus_set(dev, &link);
}
- if (!link_up)
+ if (!link_up) {
+ if (hw->phy.media_type == ngbe_media_type_fiber &&
+ hw->phy.type != ngbe_phy_mvl_sfi) {
+ intr->flags |= NGBE_FLAG_NEED_LINK_CONFIG;
+ rte_eal_alarm_set(10,
+ ngbe_dev_setup_link_alarm_handler, dev);
+ }
+
return rte_eth_linkstatus_set(dev, &link);
+ }
intr->flags &= ~NGBE_FLAG_NEED_LINK_CONFIG;
link.link_status = RTE_ETH_LINK_UP;
@@ -2062,9 +2092,6 @@ ngbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
struct ngbe_hw *hw = ngbe_dev_hw(dev);
struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
- /* clear all cause mask */
- ngbe_disable_intr(hw);
-
/* read-on-clear nic registers here */
eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
PMD_DRV_LOG(DEBUG, "eicr %x", eicr);
@@ -2084,6 +2111,8 @@ ngbe_dev_interrupt_get_status(struct rte_eth_dev *dev)
if (eicr & NGBE_ICRMISC_GPIO)
intr->flags |= NGBE_FLAG_NEED_LINK_UPDATE;
+ ((u32 *)hw->isb_mem)[NGBE_ISB_MISC] = 0;
+
return 0;
}
@@ -2136,7 +2165,6 @@ static int
ngbe_dev_interrupt_action(struct rte_eth_dev *dev)
{
struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
- int64_t timeout;
PMD_DRV_LOG(DEBUG, "intr action type %d", intr->flags);
@@ -2152,31 +2180,11 @@ ngbe_dev_interrupt_action(struct rte_eth_dev *dev)
rte_eth_linkstatus_get(dev, &link);
ngbe_dev_link_update(dev, 0);
-
- /* likely to up */
- if (link.link_status != RTE_ETH_LINK_UP)
- /* handle it 1 sec later, wait it being stable */
- timeout = NGBE_LINK_UP_CHECK_TIMEOUT;
- /* likely to down */
- else
- /* handle it 4 sec later, wait it being stable */
- timeout = NGBE_LINK_DOWN_CHECK_TIMEOUT;
-
+ intr->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
ngbe_dev_link_status_print(dev);
- if (rte_eal_alarm_set(timeout * 1000,
- ngbe_dev_interrupt_delayed_handler,
- (void *)dev) < 0) {
- PMD_DRV_LOG(ERR, "Error setting alarm");
- } else {
- /* remember original mask */
- intr->mask_misc_orig = intr->mask_misc;
- /* only disable lsc interrupt */
- intr->mask_misc &= ~NGBE_ICRMISC_PHY;
-
- intr->mask_orig = intr->mask;
- /* only disable all misc interrupts */
- intr->mask &= ~(1ULL << NGBE_MISC_VEC_ID);
- }
+ if (dev->data->dev_link.link_speed != link.link_speed)
+ rte_eth_dev_callback_process(dev,
+ RTE_ETH_EVENT_INTR_LSC, NULL);
}
PMD_DRV_LOG(DEBUG, "enable intr immediately");
@@ -2185,53 +2193,6 @@ ngbe_dev_interrupt_action(struct rte_eth_dev *dev)
return 0;
}
-/**
- * Interrupt handler which shall be registered for alarm callback for delayed
- * handling specific interrupt to wait for the stable nic state. As the
- * NIC interrupt state is not stable for ngbe after link is just down,
- * it needs to wait 4 seconds to get the stable status.
- *
- * @param param
- * The address of parameter (struct rte_eth_dev *) registered before.
- */
-static void
-ngbe_dev_interrupt_delayed_handler(void *param)
-{
- struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
- struct ngbe_interrupt *intr = ngbe_dev_intr(dev);
- struct ngbe_hw *hw = ngbe_dev_hw(dev);
- uint32_t eicr;
-
- ngbe_disable_intr(hw);
-
- eicr = ((u32 *)hw->isb_mem)[NGBE_ISB_MISC];
- if (eicr & NGBE_ICRMISC_VFMBX)
- ngbe_pf_mbx_process(dev);
-
- if (intr->flags & NGBE_FLAG_NEED_LINK_UPDATE) {
- ngbe_dev_link_update(dev, 0);
- intr->flags &= ~NGBE_FLAG_NEED_LINK_UPDATE;
- ngbe_dev_link_status_print(dev);
- rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_INTR_LSC,
- NULL);
- }
-
- if (intr->flags & NGBE_FLAG_MACSEC) {
- rte_eth_dev_callback_process(dev, RTE_ETH_EVENT_MACSEC,
- NULL);
- intr->flags &= ~NGBE_FLAG_MACSEC;
- }
-
- /* restore original mask */
- intr->mask_misc = intr->mask_misc_orig;
- intr->mask_misc_orig = 0;
- intr->mask = intr->mask_orig;
- intr->mask_orig = 0;
-
- PMD_DRV_LOG(DEBUG, "enable intr in delayed handler S[%08x]", eicr);
- ngbe_enable_intr(dev);
-}
-
/**
* Interrupt handler triggered by NIC for handling
* specific interrupt.
diff --git a/drivers/net/ngbe/ngbe_ethdev.h b/drivers/net/ngbe/ngbe_ethdev.h
index bb96f6a5e7..8d500fd38c 100644
--- a/drivers/net/ngbe/ngbe_ethdev.h
+++ b/drivers/net/ngbe/ngbe_ethdev.h
@@ -341,6 +341,7 @@ void ngbe_vlan_hw_strip_bitmap_set(struct rte_eth_dev *dev,
uint16_t queue, bool on);
void ngbe_config_vlan_strip_on_all_queues(struct rte_eth_dev *dev,
int mask);
+void ngbe_dev_setup_link_alarm_handler(void *param);
void ngbe_read_stats_registers(struct ngbe_hw *hw,
struct ngbe_hw_stats *hw_stats);
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 3/9] net/ngbe: fix Tx pending
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
2022-02-08 10:11 ` [PATCH 1/9] net/ngbe: fix failed to receive packets Jiawen Wu
2022-02-08 10:11 ` [PATCH 2/9] net/ngbe: fix link interrupt sometimes lost Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 17:38 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 4/9] net/ngbe: fix RxTx packet statistics Jiawen Wu
` (5 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
Add commands requesting firmware to enable or disable PCIe bus master.
Disable PCIe master access to clear BME when stop hardware, and verify
there are no pending requests.
Fixes: 78710873c2f3 ("net/ngbe: add HW initialization")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_hw.c | 76 +++++++++++++++++++++++++++----
drivers/net/ngbe/base/ngbe_hw.h | 1 +
drivers/net/ngbe/base/ngbe_mng.c | 57 +++++++++++++++++++++++
drivers/net/ngbe/base/ngbe_mng.h | 21 +++++++++
drivers/net/ngbe/base/ngbe_regs.h | 3 ++
drivers/net/ngbe/base/ngbe_type.h | 3 ++
drivers/net/ngbe/ngbe_ethdev.c | 7 ++-
7 files changed, 158 insertions(+), 10 deletions(-)
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 0b22ea0fb3..782fd71d29 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -350,8 +350,8 @@ void ngbe_set_lan_id_multi_port(struct ngbe_hw *hw)
**/
s32 ngbe_stop_hw(struct ngbe_hw *hw)
{
- u32 reg_val;
u16 i;
+ s32 status = 0;
DEBUGFUNC("ngbe_stop_hw");
@@ -372,16 +372,27 @@ s32 ngbe_stop_hw(struct ngbe_hw *hw)
wr32(hw, NGBE_ICRMISC, NGBE_ICRMISC_MASK);
wr32(hw, NGBE_ICR(0), NGBE_ICR_MASK);
- /* Disable the transmit unit. Each queue must be disabled. */
- for (i = 0; i < hw->mac.max_tx_queues; i++)
- wr32(hw, NGBE_TXCFG(i), NGBE_TXCFG_FLUSH);
+ wr32(hw, NGBE_BMECTL, 0x3);
/* Disable the receive unit by stopping each queue */
- for (i = 0; i < hw->mac.max_rx_queues; i++) {
- reg_val = rd32(hw, NGBE_RXCFG(i));
- reg_val &= ~NGBE_RXCFG_ENA;
- wr32(hw, NGBE_RXCFG(i), reg_val);
- }
+ for (i = 0; i < hw->mac.max_rx_queues; i++)
+ wr32(hw, NGBE_RXCFG(i), 0);
+
+ /* flush all queues disables */
+ ngbe_flush(hw);
+ msec_delay(2);
+
+ /*
+ * Prevent the PCI-E bus from hanging by disabling PCI-E master
+ * access and verify no pending requests
+ */
+ status = ngbe_set_pcie_master(hw, false);
+ if (status)
+ return status;
+
+ /* Disable the transmit unit. Each queue must be disabled. */
+ for (i = 0; i < hw->mac.max_tx_queues; i++)
+ wr32(hw, NGBE_TXCFG(i), 0);
/* flush all queues disables */
ngbe_flush(hw);
@@ -1076,6 +1087,53 @@ void ngbe_fc_autoneg(struct ngbe_hw *hw)
}
}
+/**
+ * ngbe_set_pcie_master - Disable or Enable PCI-express master access
+ * @hw: pointer to hardware structure
+ *
+ * Disables PCI-Express master access and verifies there are no pending
+ * requests. NGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ * bit hasn't caused the master requests to be disabled, else 0
+ * is returned signifying master requests disabled.
+ **/
+s32 ngbe_set_pcie_master(struct ngbe_hw *hw, bool enable)
+{
+ s32 status = 0;
+ u16 addr = 0x04;
+ u32 data, i;
+
+ DEBUGFUNC("ngbe_set_pcie_master");
+
+ ngbe_hic_pcie_read(hw, addr, &data, 4);
+ if (enable)
+ data |= 0x04;
+ else
+ data &= ~0x04;
+
+ ngbe_hic_pcie_write(hw, addr, &data, 4);
+
+ if (enable)
+ goto out;
+
+ /* Exit if master requests are blocked */
+ if (!(rd32(hw, NGBE_BMEPEND)) ||
+ NGBE_REMOVED(hw->hw_addr))
+ goto out;
+
+ /* Poll for master request bit to clear */
+ for (i = 0; i < NGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+ usec_delay(100);
+ if (!(rd32(hw, NGBE_BMEPEND)))
+ goto out;
+ }
+
+ DEBUGOUT("PCIe transaction pending bit also did not clear.\n");
+ status = NGBE_ERR_MASTER_REQUESTS_PENDING;
+
+out:
+ return status;
+}
+
/**
* ngbe_acquire_swfw_sync - Acquire SWFW semaphore
* @hw: pointer to hardware structure
diff --git a/drivers/net/ngbe/base/ngbe_hw.h b/drivers/net/ngbe/base/ngbe_hw.h
index b32cf87ff4..7e0e23b195 100644
--- a/drivers/net/ngbe/base/ngbe_hw.h
+++ b/drivers/net/ngbe/base/ngbe_hw.h
@@ -54,6 +54,7 @@ void ngbe_fc_autoneg(struct ngbe_hw *hw);
s32 ngbe_validate_mac_addr(u8 *mac_addr);
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask);
void ngbe_release_swfw_sync(struct ngbe_hw *hw, u32 mask);
+s32 ngbe_set_pcie_master(struct ngbe_hw *hw, bool enable);
s32 ngbe_set_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
s32 ngbe_clear_vmdq(struct ngbe_hw *hw, u32 rar, u32 vmdq);
diff --git a/drivers/net/ngbe/base/ngbe_mng.c b/drivers/net/ngbe/base/ngbe_mng.c
index a3dd8093ce..68e06e2c24 100644
--- a/drivers/net/ngbe/base/ngbe_mng.c
+++ b/drivers/net/ngbe/base/ngbe_mng.c
@@ -243,6 +243,63 @@ s32 ngbe_hic_sr_write(struct ngbe_hw *hw, u32 addr, u8 *buf, int len)
return err;
}
+s32 ngbe_hic_pcie_read(struct ngbe_hw *hw, u16 addr, u32 *buf, int len)
+{
+ struct ngbe_hic_read_pcie command;
+ u32 value = 0;
+ int err, i = 0;
+
+ if (len > NGBE_PMMBX_DATA_SIZE)
+ return NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+ memset(&command, 0, sizeof(command));
+ command.hdr.cmd = FW_PCIE_READ_CMD;
+ command.hdr.buf_len = sizeof(command) - sizeof(command.hdr);
+ command.hdr.checksum = FW_DEFAULT_CHECKSUM;
+ command.lan_id = hw->bus.lan_id;
+ command.addr = addr;
+
+ err = ngbe_host_interface_command(hw, (u32 *)&command,
+ sizeof(command), NGBE_HI_COMMAND_TIMEOUT, false);
+ if (err)
+ return err;
+
+ while (i < (len >> 2)) {
+ value = rd32a(hw, NGBE_MNGMBX, FW_PCIE_BUSMASTER_OFFSET + i);
+ ((u32 *)buf)[i] = value;
+ i++;
+ }
+
+ return 0;
+}
+
+s32 ngbe_hic_pcie_write(struct ngbe_hw *hw, u16 addr, u32 *buf, int len)
+{
+ struct ngbe_hic_write_pcie command;
+ u32 value = 0;
+ int err, i = 0;
+
+ while (i < (len >> 2)) {
+ value = ((u32 *)buf)[i];
+ i++;
+ }
+
+ memset(&command, 0, sizeof(command));
+ command.hdr.cmd = FW_PCIE_WRITE_CMD;
+ command.hdr.buf_len = sizeof(command) - sizeof(command.hdr);
+ command.hdr.checksum = FW_DEFAULT_CHECKSUM;
+ command.lan_id = hw->bus.lan_id;
+ command.addr = addr;
+ command.data = value;
+
+ err = ngbe_host_interface_command(hw, (u32 *)&command,
+ sizeof(command), NGBE_HI_COMMAND_TIMEOUT, false);
+ if (err)
+ return err;
+
+ return 0;
+}
+
s32 ngbe_hic_check_cap(struct ngbe_hw *hw)
{
struct ngbe_hic_read_shadow_ram command;
diff --git a/drivers/net/ngbe/base/ngbe_mng.h b/drivers/net/ngbe/base/ngbe_mng.h
index e3d0309cbc..321338a051 100644
--- a/drivers/net/ngbe/base/ngbe_mng.h
+++ b/drivers/net/ngbe/base/ngbe_mng.h
@@ -20,6 +20,9 @@
#define FW_READ_SHADOW_RAM_LEN 0x6
#define FW_WRITE_SHADOW_RAM_CMD 0x33
#define FW_WRITE_SHADOW_RAM_LEN 0xA /* 8 plus 1 WORD to write */
+#define FW_PCIE_READ_CMD 0xEC
+#define FW_PCIE_WRITE_CMD 0xED
+#define FW_PCIE_BUSMASTER_OFFSET 2
#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
#define FW_NVM_DATA_OFFSET 3
#define FW_EEPROM_CHECK_STATUS 0xE9
@@ -76,8 +79,26 @@ struct ngbe_hic_write_shadow_ram {
u16 pad3;
};
+struct ngbe_hic_read_pcie {
+ struct ngbe_hic_hdr hdr;
+ u8 lan_id;
+ u8 rsvd;
+ u16 addr;
+ u32 data;
+};
+
+struct ngbe_hic_write_pcie {
+ struct ngbe_hic_hdr hdr;
+ u8 lan_id;
+ u8 rsvd;
+ u16 addr;
+ u32 data;
+};
+
s32 ngbe_hic_sr_read(struct ngbe_hw *hw, u32 addr, u8 *buf, int len);
s32 ngbe_hic_sr_write(struct ngbe_hw *hw, u32 addr, u8 *buf, int len);
+s32 ngbe_hic_pcie_read(struct ngbe_hw *hw, u16 addr, u32 *buf, int len);
+s32 ngbe_hic_pcie_write(struct ngbe_hw *hw, u16 addr, u32 *buf, int len);
s32 ngbe_hic_check_cap(struct ngbe_hw *hw);
#endif /* _NGBE_MNG_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_regs.h b/drivers/net/ngbe/base/ngbe_regs.h
index 872b008c46..e84bfdf88a 100644
--- a/drivers/net/ngbe/base/ngbe_regs.h
+++ b/drivers/net/ngbe/base/ngbe_regs.h
@@ -866,6 +866,9 @@ enum ngbe_5tuple_protocol {
* PF(Physical Function) Registers
******************************************************************************/
/* Interrupt */
+#define NGBE_BMECTL 0x012020
+#define NGBE_BMECTL_VFDRP MS(1, 0x1)
+#define NGBE_BMECTL_PFDRP MS(0, 0x1)
#define NGBE_ICRMISC 0x000100
#define NGBE_ICRMISC_MASK MS(8, 0xFFFFFF)
#define NGBE_ICRMISC_RST MS(10, 0x1) /* device reset event */
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 269e087d50..4c995e7397 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -17,6 +17,9 @@
#define NGBE_MAX_QP (8)
#define NGBE_MAX_UTA 128
+#define NGBE_PCI_MASTER_DISABLE_TIMEOUT 800
+
+
#define NGBE_ALIGN 128 /* as intel did */
#define NGBE_ISB_SIZE 16
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 8e31234442..30c9e68579 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -950,7 +950,6 @@ ngbe_dev_start(struct rte_eth_dev *dev)
/* stop adapter */
hw->adapter_stopped = 0;
- ngbe_stop_hw(hw);
/* reinitialize adapter, this calls reset and start */
hw->nb_rx_queues = dev->data->nb_rx_queues;
@@ -961,6 +960,8 @@ ngbe_dev_start(struct rte_eth_dev *dev)
hw->mac.start_hw(hw);
hw->mac.get_link_status = true;
+ ngbe_set_pcie_master(hw, true);
+
/* configure PF module if SRIOV enabled */
ngbe_pf_host_configure(dev);
@@ -1174,6 +1175,8 @@ ngbe_dev_stop(struct rte_eth_dev *dev)
rte_intr_efd_disable(intr_handle);
rte_intr_vec_list_free(intr_handle);
+ ngbe_set_pcie_master(hw, true);
+
adapter->rss_reta_updated = 0;
hw->adapter_stopped = true;
@@ -1202,6 +1205,8 @@ ngbe_dev_close(struct rte_eth_dev *dev)
ngbe_dev_free_queues(dev);
+ ngbe_set_pcie_master(hw, false);
+
/* reprogram the RAR[0] in case user changed it. */
ngbe_set_rar(hw, 0, hw->mac.addr, 0, true);
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 4/9] net/ngbe: fix RxTx packet statistics
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (2 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 3/9] net/ngbe: fix Tx pending Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 17:38 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 5/9] net/ngbe: optimize the PHY initialization process Jiawen Wu
` (4 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
Fix specific length packet statistics caused by wrong register addresses.
Fixes: ed5f3bd3373e ("net/ngbe: define registers")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_regs.h | 48 +++++++++++++++----------------
1 file changed, 24 insertions(+), 24 deletions(-)
diff --git a/drivers/net/ngbe/base/ngbe_regs.h b/drivers/net/ngbe/base/ngbe_regs.h
index e84bfdf88a..6432ad8736 100644
--- a/drivers/net/ngbe/base/ngbe_regs.h
+++ b/drivers/net/ngbe/base/ngbe_regs.h
@@ -785,30 +785,30 @@ enum ngbe_5tuple_protocol {
#define NGBE_MACRXERRCRCH 0x01192C
#define NGBE_MACRXERRLENL 0x011978
#define NGBE_MACRXERRLENH 0x01197C
-#define NGBE_MACRX1TO64L 0x001940
-#define NGBE_MACRX1TO64H 0x001944
-#define NGBE_MACRX65TO127L 0x001948
-#define NGBE_MACRX65TO127H 0x00194C
-#define NGBE_MACRX128TO255L 0x001950
-#define NGBE_MACRX128TO255H 0x001954
-#define NGBE_MACRX256TO511L 0x001958
-#define NGBE_MACRX256TO511H 0x00195C
-#define NGBE_MACRX512TO1023L 0x001960
-#define NGBE_MACRX512TO1023H 0x001964
-#define NGBE_MACRX1024TOMAXL 0x001968
-#define NGBE_MACRX1024TOMAXH 0x00196C
-#define NGBE_MACTX1TO64L 0x001834
-#define NGBE_MACTX1TO64H 0x001838
-#define NGBE_MACTX65TO127L 0x00183C
-#define NGBE_MACTX65TO127H 0x001840
-#define NGBE_MACTX128TO255L 0x001844
-#define NGBE_MACTX128TO255H 0x001848
-#define NGBE_MACTX256TO511L 0x00184C
-#define NGBE_MACTX256TO511H 0x001850
-#define NGBE_MACTX512TO1023L 0x001854
-#define NGBE_MACTX512TO1023H 0x001858
-#define NGBE_MACTX1024TOMAXL 0x00185C
-#define NGBE_MACTX1024TOMAXH 0x001860
+#define NGBE_MACRX1TO64L 0x011940
+#define NGBE_MACRX1TO64H 0x011944
+#define NGBE_MACRX65TO127L 0x011948
+#define NGBE_MACRX65TO127H 0x01194C
+#define NGBE_MACRX128TO255L 0x011950
+#define NGBE_MACRX128TO255H 0x011954
+#define NGBE_MACRX256TO511L 0x011958
+#define NGBE_MACRX256TO511H 0x01195C
+#define NGBE_MACRX512TO1023L 0x011960
+#define NGBE_MACRX512TO1023H 0x011964
+#define NGBE_MACRX1024TOMAXL 0x011968
+#define NGBE_MACRX1024TOMAXH 0x01196C
+#define NGBE_MACTX1TO64L 0x011834
+#define NGBE_MACTX1TO64H 0x011838
+#define NGBE_MACTX65TO127L 0x01183C
+#define NGBE_MACTX65TO127H 0x011840
+#define NGBE_MACTX128TO255L 0x011844
+#define NGBE_MACTX128TO255H 0x011848
+#define NGBE_MACTX256TO511L 0x01184C
+#define NGBE_MACTX256TO511H 0x011850
+#define NGBE_MACTX512TO1023L 0x011854
+#define NGBE_MACTX512TO1023H 0x011858
+#define NGBE_MACTX1024TOMAXL 0x01185C
+#define NGBE_MACTX1024TOMAXH 0x011860
#define NGBE_MACRXUNDERSIZE 0x011938
#define NGBE_MACRXOVERSIZE 0x01193C
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 5/9] net/ngbe: optimize the PHY initialization process
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (3 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 4/9] net/ngbe: fix RxTx packet statistics Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 17:39 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 6/9] net/ngbe: add support to custom PHY interfaces Jiawen Wu
` (3 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Reduce the probability of PHY init failure, And add its error return.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/ngbe/base/ngbe_hw.c | 7 ++---
drivers/net/ngbe/base/ngbe_phy_rtl.c | 40 +++++++++++++---------------
drivers/net/ngbe/ngbe_ethdev.c | 6 ++++-
3 files changed, 28 insertions(+), 25 deletions(-)
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 782fd71d29..72d475ccf9 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -1145,6 +1145,7 @@ s32 ngbe_set_pcie_master(struct ngbe_hw *hw, bool enable)
s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask)
{
u32 mngsem = 0;
+ u32 fwsm = 0;
u32 swmask = NGBE_MNGSEM_SW(mask);
u32 fwmask = NGBE_MNGSEM_FW(mask);
u32 timeout = 200;
@@ -1173,9 +1174,9 @@ s32 ngbe_acquire_swfw_sync(struct ngbe_hw *hw, u32 mask)
}
}
- /* If time expired clear the bits holding the lock and retry */
- if (mngsem & (fwmask | swmask))
- ngbe_release_swfw_sync(hw, mngsem & (fwmask | swmask));
+ fwsm = rd32(hw, NGBE_MNGFWSYNC);
+ DEBUGOUT("SWFW semaphore not granted: MNG_SWFW_SYNC = 0x%x, MNG_FW_SM = 0x%x\n",
+ mngsem, fwsm);
msec_delay(5);
return NGBE_ERR_SWFW_SYNC;
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.c b/drivers/net/ngbe/base/ngbe_phy_rtl.c
index 7b08b7a46c..c59efe3153 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.c
@@ -4,8 +4,6 @@
#include "ngbe_phy_rtl.h"
-#define RTL_PHY_RST_WAIT_PERIOD 5
-
s32 ngbe_read_phy_reg_rtl(struct ngbe_hw *hw,
u32 reg_addr, u32 device_type, u16 *phy_data)
{
@@ -61,34 +59,44 @@ s32 ngbe_init_phy_rtl(struct ngbe_hw *hw)
return NGBE_ERR_PHY_TIMEOUT;
}
- for (i = 0; i < 1000; i++) {
- hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
- if (value & RTL_INSR_ACCESS)
- break;
+ hw->phy.write_reg(hw, RTL_SCR, 0xa46, RTL_SCR_EFUSE);
+ hw->phy.read_reg(hw, RTL_SCR, 0xa46, &value);
+ if (!(value & RTL_SCR_EFUSE)) {
+ DEBUGOUT("Write EFUSE failed.\n");
+ return NGBE_ERR_PHY_TIMEOUT;
}
- hw->phy.write_reg(hw, RTL_SCR, 0xa46, RTL_SCR_EFUSE);
for (i = 0; i < 1000; i++) {
hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
if (value & RTL_INSR_ACCESS)
break;
+ msec_delay(1);
}
if (i == 1000)
- return NGBE_ERR_PHY_TIMEOUT;
+ DEBUGOUT("PHY wait mdio 1 access timeout.\n");
+
hw->phy.write_reg(hw, RTL_SCR, 0xa46, RTL_SCR_EXTINI);
+ hw->phy.read_reg(hw, RTL_SCR, 0xa46, &value);
+ if (!(value & RTL_SCR_EXTINI)) {
+ DEBUGOUT("Write EXIINI failed.\n");
+ return NGBE_ERR_PHY_TIMEOUT;
+ }
+
for (i = 0; i < 1000; i++) {
hw->phy.read_reg(hw, RTL_INSR, 0xa43, &value);
if (value & RTL_INSR_ACCESS)
break;
+ msec_delay(1);
}
if (i == 1000)
- return NGBE_ERR_PHY_TIMEOUT;
+ DEBUGOUT("PHY wait mdio 2 access timeout.\n");
for (i = 0; i < 1000; i++) {
hw->phy.read_reg(hw, RTL_GSR, 0xa42, &value);
if ((value & RTL_GSR_ST) == RTL_GSR_ST_LANON)
break;
+ msec_delay(1);
}
if (i == 1000)
return NGBE_ERR_PHY_TIMEOUT;
@@ -226,7 +234,7 @@ s32 ngbe_setup_phy_link_rtl(struct ngbe_hw *hw,
s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
{
- u16 value = 0, i;
+ u16 value = 0;
s32 status = 0;
DEBUGFUNC("ngbe_reset_phy_rtl");
@@ -234,17 +242,7 @@ s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
value |= RTL_BMCR_RESET;
status = hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, value);
- for (i = 0; i < RTL_PHY_RST_WAIT_PERIOD; i++) {
- status = hw->phy.read_reg(hw, RTL_BMCR, RTL_DEV_ZERO, &value);
- if (!(value & RTL_BMCR_RESET))
- break;
- msleep(1);
- }
-
- if (i == RTL_PHY_RST_WAIT_PERIOD) {
- DEBUGOUT("PHY reset polling failed to complete.\n");
- return NGBE_ERR_RESET_FAILED;
- }
+ msec_delay(5);
return status;
}
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index 30c9e68579..cc530fdced 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -1058,7 +1058,11 @@ ngbe_dev_start(struct rte_eth_dev *dev)
speed |= NGBE_LINK_SPEED_10M_FULL;
}
- hw->phy.init_hw(hw);
+ err = hw->phy.init_hw(hw);
+ if (err != 0) {
+ PMD_INIT_LOG(ERR, "PHY init failed");
+ goto error;
+ }
err = hw->mac.setup_link(hw, speed, link_up);
if (err != 0)
goto error;
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 6/9] net/ngbe: add support to custom PHY interfaces
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (4 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 5/9] net/ngbe: optimize the PHY initialization process Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 17:41 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 7/9] net: add LED OEM support for wangxun devices Jiawen Wu
` (2 subsequent siblings)
8 siblings, 1 reply; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Support sub_device ID 61/62/64 for YT8521S SFP, and 51/52 for M88E1512
PHY.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/rel_notes/release_22_03.rst | 4 +
drivers/net/ngbe/base/ngbe_devids.h | 12 +-
drivers/net/ngbe/base/ngbe_hw.c | 50 +++++--
drivers/net/ngbe/base/ngbe_phy.c | 27 ++--
drivers/net/ngbe/base/ngbe_phy.h | 2 +-
drivers/net/ngbe/base/ngbe_phy_mvl.c | 55 +++++++-
drivers/net/ngbe/base/ngbe_phy_mvl.h | 5 +
drivers/net/ngbe/base/ngbe_phy_yt.c | 182 +++++++++++++++++++++----
drivers/net/ngbe/base/ngbe_phy_yt.h | 19 ++-
drivers/net/ngbe/base/ngbe_type.h | 7 +
drivers/net/ngbe/ngbe_ethdev.c | 6 +-
11 files changed, 310 insertions(+), 59 deletions(-)
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 746f50e84f..3b2517f4c3 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -69,6 +69,10 @@ New Features
* Added AES-XCBC support in lookaside protocol (IPsec) for CN9K & CN10K.
* Added AES-CMAC support in CN9K & CN10K.
+* **Updated Wangxun ngbe driver.**
+
+ * Added support for devices of custom PHY interfaces.
+
* **Added an API to retrieve event port id of ethdev Rx adapter.**
The new API ``rte_event_eth_rx_adapter_event_port_get()`` was added.
diff --git a/drivers/net/ngbe/base/ngbe_devids.h b/drivers/net/ngbe/base/ngbe_devids.h
index 6010cc050e..83eedf423e 100644
--- a/drivers/net/ngbe/base/ngbe_devids.h
+++ b/drivers/net/ngbe/base/ngbe_devids.h
@@ -19,9 +19,11 @@
#define NGBE_SUB_DEV_ID_EM_VF 0x0110
#define NGBE_DEV_ID_EM 0x0100
#define NGBE_SUB_DEV_ID_EM_MVL_RGMII 0x0200
+#define NGBE_SUB_DEV_ID_EM_MVL_MIX 0x0252
#define NGBE_SUB_DEV_ID_EM_MVL_SFP 0x0403
#define NGBE_SUB_DEV_ID_EM_RTL_SGMII 0x0410
#define NGBE_SUB_DEV_ID_EM_YT8521S_SFP 0x0460
+#define NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP 0x0461
#define NGBE_DEV_ID_EM_WX1860AL_W 0x0100
#define NGBE_DEV_ID_EM_WX1860AL_W_VF 0x0110
@@ -67,15 +69,19 @@
#define NGBE_SUB_DEV_ID_EM_SF400_LY_YT 0x0470
/* Assign excessive id with masks */
-#define NGBE_INTERNAL_MASK 0x000F
-#define NGBE_OEM_MASK 0x00F0
+#define NGBE_OEM_MASK 0x00FF
#define NGBE_WOL_SUP_MASK 0x4000
#define NGBE_NCSI_SUP_MASK 0x8000
-#define NGBE_INTERNAL_SFP 0x0003
+#define NGBE_M88E1512_SFP 0x0003
#define NGBE_OCP_CARD 0x0040
#define NGBE_LY_M88E1512_SFP 0x0050
+#define NGBE_M88E1512_RJ45 0x0051
+#define NGBE_M88E1512_MIX 0x0052
#define NGBE_YT8521S_SFP 0x0060
+#define NGBE_INTERNAL_YT8521S_SFP 0x0061
+#define NGBE_YT8521S_SFP_GPIO 0x0062
+#define NGBE_INTERNAL_YT8521S_SFP_GPIO 0x0064
#define NGBE_LY_YT8521S_SFP 0x0070
#define NGBE_WOL_SUP 0x4000
#define NGBE_NCSI_SUP 0x8000
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 72d475ccf9..0eab3f59e1 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -124,8 +124,7 @@ ngbe_reset_misc_em(struct ngbe_hw *hw)
wr32m(hw, NGBE_GPIE, NGBE_GPIE_MSIX, NGBE_GPIE_MSIX);
- if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
- (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ if (hw->gpio_ctl == 1) {
/* gpio0 is used to power on/off control*/
wr32(hw, NGBE_GPIODIR, NGBE_GPIODIR_DDR(1));
wr32(hw, NGBE_GPIODATA, NGBE_GPIOBIT_0);
@@ -1617,19 +1616,21 @@ s32 ngbe_get_link_capabilities_em(struct ngbe_hw *hw,
bool *autoneg)
{
s32 status = 0;
-
+ u16 value = 0;
DEBUGFUNC("\n");
hw->mac.autoneg = *autoneg;
- switch (hw->sub_device_id) {
- case NGBE_SUB_DEV_ID_EM_RTL_SGMII:
+ if (hw->phy.type == ngbe_phy_rtl) {
*speed = NGBE_LINK_SPEED_1GB_FULL |
NGBE_LINK_SPEED_100M_FULL |
NGBE_LINK_SPEED_10M_FULL;
- break;
- default:
- break;
+ }
+
+ if (hw->phy.type == ngbe_phy_yt8521s_sfi) {
+ ngbe_read_phy_reg_ext_yt(hw, YT_CHIP, 0, &value);
+ if ((value & YT_CHIP_MODE_MASK) == YT_CHIP_MODE_SEL(1))
+ *speed = NGBE_LINK_SPEED_1GB_FULL;
}
return status;
@@ -1815,11 +1816,23 @@ s32 ngbe_set_mac_type(struct ngbe_hw *hw)
case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
hw->phy.media_type = ngbe_media_type_copper;
hw->mac.type = ngbe_mac_em;
+ hw->mac.link_type = ngbe_link_copper;
+ break;
+ case NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP:
+ hw->phy.media_type = ngbe_media_type_copper;
+ hw->mac.type = ngbe_mac_em;
+ hw->mac.link_type = ngbe_link_fiber;
break;
case NGBE_SUB_DEV_ID_EM_MVL_SFP:
case NGBE_SUB_DEV_ID_EM_YT8521S_SFP:
hw->phy.media_type = ngbe_media_type_fiber;
hw->mac.type = ngbe_mac_em;
+ hw->mac.link_type = ngbe_link_fiber;
+ break;
+ case NGBE_SUB_DEV_ID_EM_MVL_MIX:
+ hw->phy.media_type = ngbe_media_type_unknown;
+ hw->mac.type = ngbe_mac_em;
+ hw->mac.link_type = ngbe_media_type_unknown;
break;
case NGBE_SUB_DEV_ID_EM_VF:
hw->phy.media_type = ngbe_media_type_virtual;
@@ -1871,7 +1884,7 @@ s32 ngbe_enable_rx_dma(struct ngbe_hw *hw, u32 regval)
void ngbe_map_device_id(struct ngbe_hw *hw)
{
u16 oem = hw->sub_system_id & NGBE_OEM_MASK;
- u16 internal = hw->sub_system_id & NGBE_INTERNAL_MASK;
+
hw->is_pf = true;
/* move subsystem_device_id to device_id */
@@ -1905,20 +1918,31 @@ void ngbe_map_device_id(struct ngbe_hw *hw)
case NGBE_DEV_ID_EM_WX1860A1:
case NGBE_DEV_ID_EM_WX1860A1L:
hw->device_id = NGBE_DEV_ID_EM;
- if (oem == NGBE_LY_M88E1512_SFP ||
- internal == NGBE_INTERNAL_SFP)
+ if (oem == NGBE_M88E1512_SFP || oem == NGBE_LY_M88E1512_SFP)
hw->sub_device_id = NGBE_SUB_DEV_ID_EM_MVL_SFP;
- else if (hw->sub_system_id == NGBE_SUB_DEV_ID_EM_M88E1512_RJ45)
+ else if (oem == NGBE_M88E1512_RJ45 ||
+ (hw->sub_system_id == NGBE_SUB_DEV_ID_EM_M88E1512_RJ45))
hw->sub_device_id = NGBE_SUB_DEV_ID_EM_MVL_RGMII;
+ else if (oem == NGBE_M88E1512_MIX)
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_MVL_MIX;
else if (oem == NGBE_YT8521S_SFP ||
- oem == NGBE_LY_YT8521S_SFP)
+ oem == NGBE_YT8521S_SFP_GPIO ||
+ oem == NGBE_LY_YT8521S_SFP)
hw->sub_device_id = NGBE_SUB_DEV_ID_EM_YT8521S_SFP;
+ else if (oem == NGBE_INTERNAL_YT8521S_SFP ||
+ oem == NGBE_INTERNAL_YT8521S_SFP_GPIO)
+ hw->sub_device_id = NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP;
else
hw->sub_device_id = NGBE_SUB_DEV_ID_EM_RTL_SGMII;
break;
default:
break;
}
+
+ if (oem == NGBE_LY_M88E1512_SFP || oem == NGBE_YT8521S_SFP_GPIO ||
+ oem == NGBE_INTERNAL_YT8521S_SFP_GPIO ||
+ oem == NGBE_LY_YT8521S_SFP)
+ hw->gpio_ctl = true;
}
/**
diff --git a/drivers/net/ngbe/base/ngbe_phy.c b/drivers/net/ngbe/base/ngbe_phy.c
index 51b0a2ec60..93450b2977 100644
--- a/drivers/net/ngbe/base/ngbe_phy.c
+++ b/drivers/net/ngbe/base/ngbe_phy.c
@@ -54,8 +54,7 @@ static bool ngbe_probe_phy(struct ngbe_hw *hw, u16 phy_addr)
if (ngbe_get_phy_id(hw))
return false;
- hw->phy.type = ngbe_get_phy_type_from_id(hw);
- if (hw->phy.type == ngbe_phy_unknown)
+ if (ngbe_get_phy_type_from_id(hw))
return false;
return true;
@@ -174,37 +173,39 @@ s32 ngbe_get_phy_id(struct ngbe_hw *hw)
/**
* ngbe_get_phy_type_from_id - Get the phy type
- * @phy_id: PHY ID information
*
**/
-enum ngbe_phy_type ngbe_get_phy_type_from_id(struct ngbe_hw *hw)
+s32 ngbe_get_phy_type_from_id(struct ngbe_hw *hw)
{
- enum ngbe_phy_type phy_type;
+ s32 status = 0;
DEBUGFUNC("ngbe_get_phy_type_from_id");
switch (hw->phy.id) {
case NGBE_PHYID_RTL:
- phy_type = ngbe_phy_rtl;
+ hw->phy.type = ngbe_phy_rtl;
break;
case NGBE_PHYID_MVL:
if (hw->phy.media_type == ngbe_media_type_fiber)
- phy_type = ngbe_phy_mvl_sfi;
+ hw->phy.type = ngbe_phy_mvl_sfi;
+ else if (hw->phy.media_type == ngbe_media_type_copper)
+ hw->phy.type = ngbe_phy_mvl;
else
- phy_type = ngbe_phy_mvl;
+ status = ngbe_check_phy_mode_mvl(hw);
break;
case NGBE_PHYID_YT:
if (hw->phy.media_type == ngbe_media_type_fiber)
- phy_type = ngbe_phy_yt8521s_sfi;
+ hw->phy.type = ngbe_phy_yt8521s_sfi;
else
- phy_type = ngbe_phy_yt8521s;
+ hw->phy.type = ngbe_phy_yt8521s;
break;
default:
- phy_type = ngbe_phy_unknown;
+ hw->phy.type = ngbe_phy_unknown;
+ status = NGBE_ERR_DEVICE_NOT_SUPPORTED;
break;
}
- return phy_type;
+ return status;
}
/**
@@ -400,11 +401,13 @@ s32 ngbe_init_phy(struct ngbe_hw *hw)
switch (hw->sub_device_id) {
case NGBE_SUB_DEV_ID_EM_RTL_SGMII:
+ case NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP:
hw->phy.read_reg_unlocked = ngbe_read_phy_reg_rtl;
hw->phy.write_reg_unlocked = ngbe_write_phy_reg_rtl;
break;
case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
case NGBE_SUB_DEV_ID_EM_MVL_SFP:
+ case NGBE_SUB_DEV_ID_EM_MVL_MIX:
hw->phy.read_reg_unlocked = ngbe_read_phy_reg_mvl;
hw->phy.write_reg_unlocked = ngbe_write_phy_reg_mvl;
break;
diff --git a/drivers/net/ngbe/base/ngbe_phy.h b/drivers/net/ngbe/base/ngbe_phy.h
index f262ff3350..e93d6a4c4a 100644
--- a/drivers/net/ngbe/base/ngbe_phy.h
+++ b/drivers/net/ngbe/base/ngbe_phy.h
@@ -48,7 +48,7 @@ typedef struct mdi_reg mdi_reg_t;
s32 ngbe_mdi_map_register(mdi_reg_t *reg, mdi_reg_22_t *reg22);
bool ngbe_validate_phy_addr(struct ngbe_hw *hw, u32 phy_addr);
-enum ngbe_phy_type ngbe_get_phy_type_from_id(struct ngbe_hw *hw);
+s32 ngbe_get_phy_type_from_id(struct ngbe_hw *hw);
s32 ngbe_get_phy_id(struct ngbe_hw *hw);
s32 ngbe_identify_phy(struct ngbe_hw *hw);
s32 ngbe_reset_phy(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.c b/drivers/net/ngbe/base/ngbe_phy_mvl.c
index 2eb351d258..8a4df90a42 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.c
@@ -48,6 +48,31 @@ s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw,
return 0;
}
+s32 ngbe_check_phy_mode_mvl(struct ngbe_hw *hw)
+{
+ u16 value = 0;
+
+ /* select page 18 reg 20 */
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 18);
+ ngbe_read_phy_reg_mdi(hw, MVL_GEN_CTL, 0, &value);
+ if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_COPPER) {
+ /* mode select to RGMII-to-copper */
+ hw->phy.type = ngbe_phy_mvl;
+ hw->phy.media_type = ngbe_media_type_copper;
+ hw->mac.link_type = ngbe_link_copper;
+ } else if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_FIBER) {
+ /* mode select to RGMII-to-sfi */
+ hw->phy.type = ngbe_phy_mvl_sfi;
+ hw->phy.media_type = ngbe_media_type_fiber;
+ hw->mac.link_type = ngbe_link_fiber;
+ } else {
+ DEBUGOUT("marvell 88E1512 mode %x is not supported.\n", value);
+ return NGBE_ERR_DEVICE_NOT_SUPPORTED;
+ }
+
+ return 0;
+}
+
s32 ngbe_init_phy_mvl(struct ngbe_hw *hw)
{
s32 ret_val = 0;
@@ -125,6 +150,29 @@ s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw, u32 speed,
hw->phy.autoneg_advertised = 0;
if (hw->phy.type == ngbe_phy_mvl) {
+ if (!hw->mac.autoneg) {
+ switch (speed) {
+ case NGBE_LINK_SPEED_1GB_FULL:
+ value = MVL_CTRL_SPEED_SELECT1;
+ break;
+ case NGBE_LINK_SPEED_100M_FULL:
+ value = MVL_CTRL_SPEED_SELECT0;
+ break;
+ case NGBE_LINK_SPEED_10M_FULL:
+ value = 0;
+ break;
+ default:
+ value = MVL_CTRL_SPEED_SELECT0 |
+ MVL_CTRL_SPEED_SELECT1;
+ DEBUGOUT("unknown speed = 0x%x.\n", speed);
+ break;
+ }
+ /* duplex full */
+ value |= MVL_CTRL_DUPLEX | MVL_CTRL_RESET;
+ ngbe_write_phy_reg_mdi(hw, MVL_CTRL, 0, value);
+
+ goto skip_an;
+ }
if (speed & NGBE_LINK_SPEED_1GB_FULL) {
value_r9 |= MVL_PHY_1000BASET_FULL;
hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
@@ -162,7 +210,12 @@ s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw, u32 speed,
hw->phy.write_reg(hw, MVL_ANA, 0, value);
}
- value = MVL_CTRL_RESTART_AN | MVL_CTRL_ANE;
+ value = MVL_CTRL_RESTART_AN | MVL_CTRL_ANE | MVL_CTRL_RESET;
+ ngbe_write_phy_reg_mdi(hw, MVL_CTRL, 0, value);
+
+skip_an:
+ ngbe_read_phy_reg_mdi(hw, MVL_CTRL, 0, &value);
+ value |= MVL_CTRL_PWDN;
ngbe_write_phy_reg_mdi(hw, MVL_CTRL, 0, value);
hw->phy.read_reg(hw, MVL_INTR, 0, &value);
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.h b/drivers/net/ngbe/base/ngbe_phy_mvl.h
index a2b5202d4b..8aee236390 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.h
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.h
@@ -12,8 +12,12 @@
/* Page 0 for Copper, Page 1 for Fiber */
#define MVL_CTRL 0x0
#define MVL_CTRL_RESET MS16(15, 0x1)
+#define MVL_CTRL_SPEED_SELECT0 MS16(13, 0x1)
#define MVL_CTRL_ANE MS16(12, 0x1)
+#define MVL_CTRL_PWDN MS16(11, 0x1)
#define MVL_CTRL_RESTART_AN MS16(9, 0x1)
+#define MVL_CTRL_DUPLEX MS16(8, 0x1)
+#define MVL_CTRL_SPEED_SELECT1 MS16(6, 0x1)
#define MVL_ANA 0x4
/* copper */
#define MVL_CANA_ASM_PAUSE MS16(11, 0x1)
@@ -86,6 +90,7 @@ s32 ngbe_read_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
u16 *phy_data);
s32 ngbe_write_phy_reg_mvl(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
u16 phy_data);
+s32 ngbe_check_phy_mode_mvl(struct ngbe_hw *hw);
s32 ngbe_init_phy_mvl(struct ngbe_hw *hw);
s32 ngbe_reset_phy_mvl(struct ngbe_hw *hw);
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.c b/drivers/net/ngbe/base/ngbe_phy_yt.c
index 8db0f9ce48..2d184a1c30 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.c
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.c
@@ -104,23 +104,22 @@ s32 ngbe_init_phy_yt(struct ngbe_hw *hw)
DEBUGFUNC("ngbe_init_phy_yt");
- if (hw->phy.type != ngbe_phy_yt8521s_sfi)
- return 0;
-
- /* select sds area register */
+ /* close sds area register */
ngbe_write_phy_reg_ext_yt(hw, YT_SMI_PHY, 0, 0);
/* enable interrupts */
- ngbe_write_phy_reg_mdi(hw, YT_INTR, 0, YT_INTR_ENA_MASK);
-
- /* select fiber_to_rgmii first in multiplex */
- ngbe_read_phy_reg_ext_yt(hw, YT_MISC, 0, &value);
- value |= YT_MISC_FIBER_PRIO;
- ngbe_write_phy_reg_ext_yt(hw, YT_MISC, 0, value);
+ ngbe_write_phy_reg_mdi(hw, YT_INTR, 0,
+ YT_INTR_ENA_MASK | YT_SDS_INTR_ENA_MASK);
+ /* power down in fiber mode */
hw->phy.read_reg(hw, YT_BCR, 0, &value);
value |= YT_BCR_PWDN;
hw->phy.write_reg(hw, YT_BCR, 0, value);
+ /* power down in UTP mode */
+ ngbe_read_phy_reg_mdi(hw, YT_BCR, 0, &value);
+ value |= YT_BCR_PWDN;
+ ngbe_write_phy_reg_mdi(hw, YT_BCR, 0, value);
+
return 0;
}
@@ -136,15 +135,44 @@ s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw, u32 speed,
hw->phy.autoneg_advertised = 0;
- if (hw->phy.type == ngbe_phy_yt8521s) {
+ /* check chip_mode first */
+ ngbe_read_phy_reg_ext_yt(hw, YT_CHIP, 0, &value);
+ if ((value & YT_CHIP_MODE_MASK) == YT_CHIP_MODE_SEL(0)) {
+ /* UTP to rgmii */
+ if (!hw->mac.autoneg) {
+ switch (speed) {
+ case NGBE_LINK_SPEED_1GB_FULL:
+ value = YT_BCR_SPEED_SELECT1;
+ break;
+ case NGBE_LINK_SPEED_100M_FULL:
+ value = YT_BCR_SPEED_SELECT0;
+ break;
+ case NGBE_LINK_SPEED_10M_FULL:
+ value = 0;
+ break;
+ default:
+ value = YT_BCR_SPEED_SELECT0 |
+ YT_BCR_SPEED_SELECT1;
+ DEBUGOUT("unknown speed = 0x%x.\n",
+ speed);
+ break;
+ }
+ /* duplex full */
+ value |= YT_BCR_DUPLEX | YT_BCR_RESET;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+
+ goto skip_an;
+ }
+
/*disable 100/10base-T Self-negotiation ability*/
hw->phy.read_reg(hw, YT_ANA, 0, &value);
- value &= ~(YT_ANA_100BASET_FULL | YT_ANA_10BASET_FULL);
+ value &= ~(YT_ANA_100BASET_FULL | YT_ANA_100BASET_HALF |
+ YT_ANA_10BASET_FULL | YT_ANA_10BASET_HALF);
hw->phy.write_reg(hw, YT_ANA, 0, value);
/*disable 1000base-T Self-negotiation ability*/
hw->phy.read_reg(hw, YT_MS_CTRL, 0, &value);
- value &= ~YT_MS_1000BASET_FULL;
+ value &= ~(YT_MS_1000BASET_FULL | YT_MS_1000BASET_HALF);
hw->phy.write_reg(hw, YT_MS_CTRL, 0, value);
if (speed & NGBE_LINK_SPEED_1GB_FULL) {
@@ -172,9 +200,15 @@ s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw, u32 speed,
/* software reset to make the above configuration take effect*/
hw->phy.read_reg(hw, YT_BCR, 0, &value);
- value |= YT_BCR_RESET;
+ value |= YT_BCR_RESET | YT_BCR_ANE | YT_BCR_RESTART_AN;
hw->phy.write_reg(hw, YT_BCR, 0, value);
- } else {
+skip_an:
+ /* power on in UTP mode */
+ ngbe_read_phy_reg_mdi(hw, YT_BCR, 0, &value);
+ value &= ~YT_BCR_PWDN;
+ ngbe_write_phy_reg_mdi(hw, YT_BCR, 0, value);
+ } else if ((value & YT_CHIP_MODE_MASK) == YT_CHIP_MODE_SEL(1)) {
+ /* fiber to rgmii */
hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
/* RGMII_Config1 : Config rx and tx training delay */
@@ -190,6 +224,88 @@ s32 ngbe_setup_phy_link_yt(struct ngbe_hw *hw, u32 speed,
/* software reset */
ngbe_write_phy_reg_sds_ext_yt(hw, 0x0, 0, 0x9140);
+ /* power on phy */
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value &= ~YT_BCR_PWDN;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+ } else if ((value & YT_CHIP_MODE_MASK) == YT_CHIP_MODE_SEL(2)) {
+ /* power on in UTP mode */
+ ngbe_read_phy_reg_mdi(hw, YT_BCR, 0, &value);
+ value &= ~YT_BCR_PWDN;
+ ngbe_write_phy_reg_mdi(hw, YT_BCR, 0, value);
+ /* power down in fiber mode */
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value &= ~YT_BCR_PWDN;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+
+ hw->phy.read_reg(hw, YT_SPST, 0, &value);
+ if (value & YT_SPST_LINK) {
+ /* fiber up */
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+ } else {
+ /* utp up */
+ /*disable 100/10base-T Self-negotiation ability*/
+ hw->phy.read_reg(hw, YT_ANA, 0, &value);
+ value &= ~(YT_ANA_100BASET_FULL | YT_ANA_100BASET_HALF |
+ YT_ANA_10BASET_FULL | YT_ANA_10BASET_HALF);
+ hw->phy.write_reg(hw, YT_ANA, 0, value);
+
+ /*disable 1000base-T Self-negotiation ability*/
+ hw->phy.read_reg(hw, YT_MS_CTRL, 0, &value);
+ value &= ~(YT_MS_1000BASET_FULL | YT_MS_1000BASET_HALF);
+ hw->phy.write_reg(hw, YT_MS_CTRL, 0, value);
+
+ if (speed & NGBE_LINK_SPEED_1GB_FULL) {
+ hw->phy.autoneg_advertised |=
+ NGBE_LINK_SPEED_1GB_FULL;
+ value_r9 |= YT_MS_1000BASET_FULL;
+ }
+ if (speed & NGBE_LINK_SPEED_100M_FULL) {
+ hw->phy.autoneg_advertised |=
+ NGBE_LINK_SPEED_100M_FULL;
+ value_r4 |= YT_ANA_100BASET_FULL;
+ }
+ if (speed & NGBE_LINK_SPEED_10M_FULL) {
+ hw->phy.autoneg_advertised |=
+ NGBE_LINK_SPEED_10M_FULL;
+ value_r4 |= YT_ANA_10BASET_FULL;
+ }
+
+ /* enable 1000base-T Self-negotiation ability */
+ hw->phy.read_reg(hw, YT_MS_CTRL, 0, &value);
+ value |= value_r9;
+ hw->phy.write_reg(hw, YT_MS_CTRL, 0, value);
+
+ /* enable 100/10base-T Self-negotiation ability */
+ hw->phy.read_reg(hw, YT_ANA, 0, &value);
+ value |= value_r4;
+ hw->phy.write_reg(hw, YT_ANA, 0, value);
+
+ /* software reset to make the above configuration
+ * take effect
+ */
+ hw->phy.read_reg(hw, YT_BCR, 0, &value);
+ value |= YT_BCR_RESET;
+ hw->phy.write_reg(hw, YT_BCR, 0, value);
+ }
+ } else if ((value & YT_CHIP_MODE_MASK) == YT_CHIP_MODE_SEL(4)) {
+ hw->phy.autoneg_advertised |= NGBE_LINK_SPEED_1GB_FULL;
+
+ ngbe_read_phy_reg_ext_yt(hw, YT_RGMII_CONF1, 0, &value);
+ value |= YT_RGMII_CONF1_MODE;
+ ngbe_write_phy_reg_ext_yt(hw, YT_RGMII_CONF1, 0, value);
+
+ ngbe_read_phy_reg_ext_yt(hw, YT_RGMII_CONF2, 0, &value);
+ value &= ~(YT_RGMII_CONF2_SPEED_MASK | YT_RGMII_CONF2_DUPLEX |
+ YT_RGMII_CONF2_LINKUP);
+ value |= YT_RGMII_CONF2_SPEED(2) | YT_RGMII_CONF2_DUPLEX |
+ YT_RGMII_CONF2_LINKUP;
+ ngbe_write_phy_reg_ext_yt(hw, YT_RGMII_CONF2, 0, value);
+
+ ngbe_read_phy_reg_ext_yt(hw, YT_CHIP, 0, &value);
+ value &= ~YT_SMI_PHY_SW_RST;
+ ngbe_write_phy_reg_ext_yt(hw, YT_CHIP, 0, value);
+
/* power on phy */
hw->phy.read_reg(hw, YT_BCR, 0, &value);
value &= ~YT_BCR_PWDN;
@@ -214,16 +330,34 @@ s32 ngbe_reset_phy_yt(struct ngbe_hw *hw)
hw->phy.type != ngbe_phy_yt8521s_sfi)
return NGBE_ERR_PHY_TYPE;
- status = hw->phy.read_reg(hw, YT_BCR, 0, &ctrl);
- /* sds software reset */
- ctrl |= YT_BCR_RESET;
- status = hw->phy.write_reg(hw, YT_BCR, 0, ctrl);
-
- for (i = 0; i < YT_PHY_RST_WAIT_PERIOD; i++) {
+ /* check chip_mode first */
+ ngbe_read_phy_reg_ext_yt(hw, YT_CHIP, 0, &ctrl);
+ if (ctrl & YT_CHIP_MODE_MASK) {
+ /* fiber to rgmii */
status = hw->phy.read_reg(hw, YT_BCR, 0, &ctrl);
- if (!(ctrl & YT_BCR_RESET))
- break;
- msleep(1);
+ /* sds software reset */
+ ctrl |= YT_BCR_RESET;
+ status = hw->phy.write_reg(hw, YT_BCR, 0, ctrl);
+
+ for (i = 0; i < YT_PHY_RST_WAIT_PERIOD; i++) {
+ status = hw->phy.read_reg(hw, YT_BCR, 0, &ctrl);
+ if (!(ctrl & YT_BCR_RESET))
+ break;
+ msleep(1);
+ }
+ } else {
+ /* UTP to rgmii */
+ status = ngbe_read_phy_reg_mdi(hw, YT_BCR, 0, &ctrl);
+ /* sds software reset */
+ ctrl |= YT_BCR_RESET;
+ status = ngbe_write_phy_reg_mdi(hw, YT_BCR, 0, ctrl);
+
+ for (i = 0; i < YT_PHY_RST_WAIT_PERIOD; i++) {
+ status = ngbe_read_phy_reg_mdi(hw, YT_BCR, 0, &ctrl);
+ if (!(ctrl & YT_BCR_RESET))
+ break;
+ msleep(1);
+ }
}
if (i == YT_PHY_RST_WAIT_PERIOD) {
diff --git a/drivers/net/ngbe/base/ngbe_phy_yt.h b/drivers/net/ngbe/base/ngbe_phy_yt.h
index e729e0c854..c8763a90df 100644
--- a/drivers/net/ngbe/base/ngbe_phy_yt.h
+++ b/drivers/net/ngbe/base/ngbe_phy_yt.h
@@ -11,26 +11,41 @@
/* Common EXT */
#define YT_SMI_PHY 0xA000
+#define YT_SMI_PHY_SW_RST MS16(15, 0x1)
#define YT_SMI_PHY_SDS MS16(1, 0x1) /* 0 for UTP */
#define YT_CHIP 0xA001
#define YT_CHIP_SW_RST MS16(15, 0x1)
#define YT_CHIP_SW_LDO_EN MS16(6, 0x1)
+#define YT_CHIP_MODE_MASK MS16(0, 0x7)
#define YT_CHIP_MODE_SEL(v) LS16(v, 0, 0x7)
#define YT_RGMII_CONF1 0xA003
+#define YT_RGMII_CONF1_MODE MS16(15, 0x1)
#define YT_RGMII_CONF1_RXDELAY MS16(10, 0xF)
#define YT_RGMII_CONF1_TXDELAY_FE MS16(4, 0xF)
#define YT_RGMII_CONF1_TXDELAY MS16(0, 0x1)
+#define YT_RGMII_CONF2 0xA004
+#define YT_RGMII_CONF2_SPEED_MASK MS16(6, 0x3)
+#define YT_RGMII_CONF2_SPEED(v) LS16(v, 6, 0x3)
+#define YT_RGMII_CONF2_DUPLEX MS16(5, 0x1)
+#define YT_RGMII_CONF2_LINKUP MS16(4, 0x1)
#define YT_MISC 0xA006
#define YT_MISC_FIBER_PRIO MS16(8, 0x1) /* 0 for UTP */
/* MII common registers in UTP and SDS */
#define YT_BCR 0x0
#define YT_BCR_RESET MS16(15, 0x1)
+#define YT_BCR_SPEED_SELECT0 MS16(13, 0x1)
+#define YT_BCR_ANE MS16(12, 0x1)
#define YT_BCR_PWDN MS16(11, 0x1)
+#define YT_BCR_RESTART_AN MS16(9, 0x1)
+#define YT_BCR_DUPLEX MS16(8, 0x1)
+#define YT_BCR_SPEED_SELECT1 MS16(6, 0x1)
#define YT_ANA 0x4
/* copper */
#define YT_ANA_100BASET_FULL MS16(8, 0x1)
+#define YT_ANA_100BASET_HALF MS16(7, 0x1)
#define YT_ANA_10BASET_FULL MS16(6, 0x1)
+#define YT_ANA_10BASET_HALF MS16(5, 0x1)
/* fiber */
#define YT_FANA_PAUSE_MASK MS16(7, 0x3)
@@ -41,6 +56,7 @@
#define YT_MS_CTRL 0x9
#define YT_MS_1000BASET_FULL MS16(9, 0x1)
+#define YT_MS_1000BASET_HALF MS16(8, 0x1)
#define YT_SPST 0x11
#define YT_SPST_SPEED_MASK MS16(14, 0x3)
#define YT_SPST_SPEED_1000M LS16(2, 14, 0x3)
@@ -50,7 +66,8 @@
/* UTP only */
#define YT_INTR 0x12
-#define YT_INTR_ENA_MASK MS16(2, 0x3)
+#define YT_INTR_ENA_MASK MS16(10, 0x3)
+#define YT_SDS_INTR_ENA_MASK MS16(2, 0x3)
#define YT_INTR_STATUS 0x13
s32 ngbe_read_phy_reg_yt(struct ngbe_hw *hw, u32 reg_addr, u32 device_type,
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 4c995e7397..372e1e72e6 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -44,6 +44,11 @@ enum ngbe_eeprom_type {
ngbe_eeprom_none /* No NVM support */
};
+enum ngbe_link_type {
+ ngbe_link_fiber = 0,
+ ngbe_link_copper
+};
+
enum ngbe_mac_type {
ngbe_mac_unknown = 0,
ngbe_mac_em,
@@ -312,6 +317,7 @@ struct ngbe_mac_info {
s32 (*check_overtemp)(struct ngbe_hw *hw);
enum ngbe_mac_type type;
+ enum ngbe_link_type link_type;
u8 addr[ETH_ADDR_LEN];
u8 perm_addr[ETH_ADDR_LEN];
#define NGBE_MAX_MTA 128
@@ -422,6 +428,7 @@ struct ngbe_hw {
u32 q_tx_regs[8 * 4];
bool offset_loaded;
bool is_pf;
+ bool gpio_ctl;
struct {
u64 rx_qp_packets;
u64 tx_qp_packets;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index cc530fdced..fdf3aad4fa 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -1097,8 +1097,7 @@ ngbe_dev_start(struct rte_eth_dev *dev)
/* resume enabled intr since HW reset */
ngbe_enable_intr(dev);
- if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
- (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ if (hw->gpio_ctl == 1) {
/* gpio0 is used to power on/off control*/
wr32(hw, NGBE_GPIODATA, 0);
}
@@ -1141,8 +1140,7 @@ ngbe_dev_stop(struct rte_eth_dev *dev)
rte_eal_alarm_cancel(ngbe_dev_setup_link_alarm_handler, dev);
- if ((hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_M88E1512_SFP ||
- (hw->sub_system_id & NGBE_OEM_MASK) == NGBE_LY_YT8521S_SFP) {
+ if (hw->gpio_ctl == 1) {
/* gpio0 is used to power on/off control*/
wr32(hw, NGBE_GPIODATA, NGBE_GPIOBIT_0);
}
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 7/9] net: add LED OEM support for wangxun devices
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (5 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 6/9] net/ngbe: add support to custom PHY interfaces Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 17:41 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 8/9] net/txgbe: fix to set link up and down Jiawen Wu
2022-02-08 10:11 ` [PATCH 9/9] net/txgbe: fix KR auto-negotiation Jiawen Wu
8 siblings, 1 reply; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu
Support custom LED OEM for ngbe and txgbe driver.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
doc/guides/rel_notes/release_22_03.rst | 5 ++
drivers/net/ngbe/base/ngbe_dummy.h | 5 ++
drivers/net/ngbe/base/ngbe_hw.c | 1 +
drivers/net/ngbe/base/ngbe_mng.c | 49 ++++++++++++++++++
drivers/net/ngbe/base/ngbe_mng.h | 3 ++
drivers/net/ngbe/base/ngbe_phy_mvl.c | 26 ++++++----
drivers/net/ngbe/base/ngbe_phy_rtl.c | 34 +++++++++----
drivers/net/ngbe/base/ngbe_type.h | 2 +
drivers/net/ngbe/ngbe_ethdev.c | 7 +++
drivers/net/txgbe/base/txgbe_hw.c | 21 ++++----
drivers/net/txgbe/base/txgbe_mng.c | 69 ++++++++++++++++++++++++++
drivers/net/txgbe/base/txgbe_mng.h | 7 +++
drivers/net/txgbe/base/txgbe_regs.h | 12 +++--
drivers/net/txgbe/txgbe_ethdev.c | 4 +-
14 files changed, 209 insertions(+), 36 deletions(-)
diff --git a/doc/guides/rel_notes/release_22_03.rst b/doc/guides/rel_notes/release_22_03.rst
index 3b2517f4c3..76df76d96c 100644
--- a/doc/guides/rel_notes/release_22_03.rst
+++ b/doc/guides/rel_notes/release_22_03.rst
@@ -72,6 +72,11 @@ New Features
* **Updated Wangxun ngbe driver.**
* Added support for devices of custom PHY interfaces.
+ * Added LED OEM support.
+
+* **Updated Wangxun txgbe driver.**
+
+ * Added LED OEM support.
* **Added an API to retrieve event port id of ethdev Rx adapter.**
diff --git a/drivers/net/ngbe/base/ngbe_dummy.h b/drivers/net/ngbe/base/ngbe_dummy.h
index d74c9f7b54..836206e325 100644
--- a/drivers/net/ngbe/base/ngbe_dummy.h
+++ b/drivers/net/ngbe/base/ngbe_dummy.h
@@ -251,6 +251,10 @@ static inline s32 ngbe_set_phy_pause_adv_dummy(struct ngbe_hw *TUP0, u16 TUP1)
{
return NGBE_ERR_OPS_DUMMY;
}
+static inline s32 ngbe_phy_led_oem_chk_dummy(struct ngbe_hw *TUP0, u32 *TUP1)
+{
+ return NGBE_ERR_OPS_DUMMY;
+}
/* struct ngbe_mbx_operations */
static inline void ngbe_mbx_init_params_dummy(struct ngbe_hw *TUP0)
@@ -332,6 +336,7 @@ static inline void ngbe_init_ops_dummy(struct ngbe_hw *hw)
hw->phy.get_adv_pause = ngbe_get_phy_advertised_pause_dummy;
hw->phy.get_lp_adv_pause = ngbe_get_phy_lp_advertised_pause_dummy;
hw->phy.set_pause_adv = ngbe_set_phy_pause_adv_dummy;
+ hw->phy.led_oem_chk = ngbe_phy_led_oem_chk_dummy;
hw->mbx.init_params = ngbe_mbx_init_params_dummy;
hw->mbx.read = ngbe_mbx_read_dummy;
hw->mbx.write = ngbe_mbx_write_dummy;
diff --git a/drivers/net/ngbe/base/ngbe_hw.c b/drivers/net/ngbe/base/ngbe_hw.c
index 0eab3f59e1..ac0c709085 100644
--- a/drivers/net/ngbe/base/ngbe_hw.c
+++ b/drivers/net/ngbe/base/ngbe_hw.c
@@ -1972,6 +1972,7 @@ s32 ngbe_init_ops_pf(struct ngbe_hw *hw)
phy->read_reg_unlocked = ngbe_read_phy_reg_mdi;
phy->write_reg_unlocked = ngbe_write_phy_reg_mdi;
phy->reset_hw = ngbe_reset_phy;
+ phy->led_oem_chk = ngbe_phy_led_oem_chk;
/* MAC */
mac->init_hw = ngbe_init_hw;
diff --git a/drivers/net/ngbe/base/ngbe_mng.c b/drivers/net/ngbe/base/ngbe_mng.c
index 68e06e2c24..c6f4dc2e0b 100644
--- a/drivers/net/ngbe/base/ngbe_mng.c
+++ b/drivers/net/ngbe/base/ngbe_mng.c
@@ -338,3 +338,52 @@ s32 ngbe_hic_check_cap(struct ngbe_hw *hw)
return err;
}
+
+s32 ngbe_phy_led_oem_chk(struct ngbe_hw *hw, u32 *data)
+{
+ struct ngbe_hic_read_shadow_ram command;
+ s32 err;
+ int i;
+
+ DEBUGFUNC("\n");
+
+ command.hdr.req.cmd = FW_PHY_LED_CONF;
+ command.hdr.req.buf_lenh = 0;
+ command.hdr.req.buf_lenl = 0;
+ command.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* convert offset from words to bytes */
+ command.address = 0;
+ /* one word */
+ command.length = 0;
+
+ for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) {
+ err = ngbe_host_interface_command(hw, (u32 *)&command,
+ sizeof(command),
+ NGBE_HI_COMMAND_TIMEOUT, true);
+ if (err)
+ continue;
+
+ command.hdr.rsp.ret_status &= 0x1F;
+ if (command.hdr.rsp.ret_status !=
+ FW_CEM_RESP_STATUS_SUCCESS)
+ err = NGBE_ERR_HOST_INTERFACE_COMMAND;
+
+ break;
+ }
+
+ if (err)
+ return err;
+
+ if (command.address == FW_CHECKSUM_CAP_ST_PASS) {
+ *data = ((u32 *)&command)[2];
+ err = 0;
+ } else if (command.address == FW_CHECKSUM_CAP_ST_FAIL) {
+ *data = FW_CHECKSUM_CAP_ST_FAIL;
+ err = -1;
+ } else {
+ err = NGBE_ERR_EEPROM_CHECKSUM;
+ }
+
+ return err;
+}
diff --git a/drivers/net/ngbe/base/ngbe_mng.h b/drivers/net/ngbe/base/ngbe_mng.h
index 321338a051..36257d6e5e 100644
--- a/drivers/net/ngbe/base/ngbe_mng.h
+++ b/drivers/net/ngbe/base/ngbe_mng.h
@@ -26,6 +26,7 @@
#define FW_DEFAULT_CHECKSUM 0xFF /* checksum always 0xFF */
#define FW_NVM_DATA_OFFSET 3
#define FW_EEPROM_CHECK_STATUS 0xE9
+#define FW_PHY_LED_CONF 0xF1
#define FW_CHECKSUM_CAP_ST_PASS 0x80658383
#define FW_CHECKSUM_CAP_ST_FAIL 0x70657376
@@ -101,4 +102,6 @@ s32 ngbe_hic_pcie_read(struct ngbe_hw *hw, u16 addr, u32 *buf, int len);
s32 ngbe_hic_pcie_write(struct ngbe_hw *hw, u16 addr, u32 *buf, int len);
s32 ngbe_hic_check_cap(struct ngbe_hw *hw);
+s32 ngbe_phy_led_oem_chk(struct ngbe_hw *hw, u32 *data);
+
#endif /* _NGBE_MNG_H_ */
diff --git a/drivers/net/ngbe/base/ngbe_phy_mvl.c b/drivers/net/ngbe/base/ngbe_phy_mvl.c
index 8a4df90a42..01cb6b9bb3 100644
--- a/drivers/net/ngbe/base/ngbe_phy_mvl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_mvl.c
@@ -123,16 +123,9 @@ s32 ngbe_init_phy_mvl(struct ngbe_hw *hw)
value = MVL_INTR_EN_ANC | MVL_INTR_EN_LSC;
hw->phy.write_reg(hw, MVL_INTR_EN, 0, value);
- /* LED control */
- ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 3);
- ngbe_read_phy_reg_mdi(hw, MVL_LEDFCR, 0, &value);
- value &= ~(MVL_LEDFCR_CTL0 | MVL_LEDFCR_CTL1);
- value |= MVL_LEDFCR_CTL0_CONF | MVL_LEDFCR_CTL1_CONF;
- ngbe_write_phy_reg_mdi(hw, MVL_LEDFCR, 0, value);
- ngbe_read_phy_reg_mdi(hw, MVL_LEDPCR, 0, &value);
- value &= ~(MVL_LEDPCR_CTL0 | MVL_LEDPCR_CTL1);
- value |= MVL_LEDPCR_CTL0_CONF | MVL_LEDPCR_CTL1_CONF;
- ngbe_write_phy_reg_mdi(hw, MVL_LEDPCR, 0, value);
+ ngbe_read_phy_reg_mdi(hw, MVL_CTRL, 0, &value);
+ value |= MVL_CTRL_PWDN;
+ ngbe_write_phy_reg_mdi(hw, MVL_CTRL, 0, value);
return ret_val;
}
@@ -147,6 +140,19 @@ s32 ngbe_setup_phy_link_mvl(struct ngbe_hw *hw, u32 speed,
DEBUGFUNC("ngbe_setup_phy_link_mvl");
UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+ if (hw->led_conf == 0xFFFF) {
+ /* LED control */
+ ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 3);
+ ngbe_read_phy_reg_mdi(hw, MVL_LEDFCR, 0, &value);
+ value &= ~(MVL_LEDFCR_CTL0 | MVL_LEDFCR_CTL1);
+ value |= MVL_LEDFCR_CTL0_CONF | MVL_LEDFCR_CTL1_CONF;
+ ngbe_write_phy_reg_mdi(hw, MVL_LEDFCR, 0, value);
+ ngbe_read_phy_reg_mdi(hw, MVL_LEDPCR, 0, &value);
+ value &= ~(MVL_LEDPCR_CTL0 | MVL_LEDPCR_CTL1);
+ value |= MVL_LEDPCR_CTL0_CONF | MVL_LEDPCR_CTL1_CONF;
+ ngbe_write_phy_reg_mdi(hw, MVL_LEDPCR, 0, value);
+ }
+
hw->phy.autoneg_advertised = 0;
if (hw->phy.type == ngbe_phy_mvl) {
diff --git a/drivers/net/ngbe/base/ngbe_phy_rtl.c b/drivers/net/ngbe/base/ngbe_phy_rtl.c
index c59efe3153..f49d829dff 100644
--- a/drivers/net/ngbe/base/ngbe_phy_rtl.c
+++ b/drivers/net/ngbe/base/ngbe_phy_rtl.c
@@ -36,6 +36,30 @@ s32 ngbe_write_phy_reg_rtl(struct ngbe_hw *hw,
return 0;
}
+static void ngbe_phy_led_ctrl_rtl(struct ngbe_hw *hw)
+{
+ u16 value = 0;
+
+ if (hw->led_conf != 0xFFFF)
+ value = hw->led_conf & 0xFFFF;
+ else
+ value = 0x205B;
+
+ hw->phy.write_reg(hw, RTL_LCR, 0xd04, value);
+ hw->phy.write_reg(hw, RTL_EEELCR, 0xd04, 0);
+
+ hw->phy.read_reg(hw, RTL_LPCR, 0xd04, &value);
+ if (hw->led_conf != 0xFFFF) {
+ value &= ~0x73;
+ value |= hw->led_conf >> 16;
+ } else {
+ value &= 0xFFFC;
+ /*act led blinking mode set to 60ms*/
+ value |= 0x2;
+ }
+ hw->phy.write_reg(hw, RTL_LPCR, 0xd04, value);
+}
+
s32 ngbe_init_phy_rtl(struct ngbe_hw *hw)
{
int i;
@@ -219,15 +243,7 @@ s32 ngbe_setup_phy_link_rtl(struct ngbe_hw *hw,
hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, autoneg_reg);
skip_an:
- autoneg_reg = 0x205B;
- hw->phy.write_reg(hw, RTL_LCR, 0xd04, autoneg_reg);
- hw->phy.write_reg(hw, RTL_EEELCR, 0xd04, 0);
-
- hw->phy.read_reg(hw, RTL_LPCR, 0xd04, &autoneg_reg);
- autoneg_reg = autoneg_reg & 0xFFFC;
- /* act led blinking mode set to 60ms */
- autoneg_reg |= 0x2;
- hw->phy.write_reg(hw, RTL_LPCR, 0xd04, autoneg_reg);
+ ngbe_phy_led_ctrl_rtl(hw);
return 0;
}
diff --git a/drivers/net/ngbe/base/ngbe_type.h b/drivers/net/ngbe/base/ngbe_type.h
index 372e1e72e6..8f6e98ad5f 100644
--- a/drivers/net/ngbe/base/ngbe_type.h
+++ b/drivers/net/ngbe/base/ngbe_type.h
@@ -354,6 +354,7 @@ struct ngbe_phy_info {
bool autoneg_wait_to_complete);
s32 (*check_link)(struct ngbe_hw *hw, u32 *speed, bool *link_up);
s32 (*set_phy_power)(struct ngbe_hw *hw, bool on);
+ s32 (*led_oem_chk)(struct ngbe_hw *hw, u32 *data);
s32 (*get_adv_pause)(struct ngbe_hw *hw, u8 *pause_bit);
s32 (*get_lp_adv_pause)(struct ngbe_hw *hw, u8 *pause_bit);
s32 (*set_pause_adv)(struct ngbe_hw *hw, u16 pause_bit);
@@ -429,6 +430,7 @@ struct ngbe_hw {
bool offset_loaded;
bool is_pf;
bool gpio_ctl;
+ u32 led_conf;
struct {
u64 rx_qp_packets;
u64 tx_qp_packets;
diff --git a/drivers/net/ngbe/ngbe_ethdev.c b/drivers/net/ngbe/ngbe_ethdev.c
index fdf3aad4fa..33aca4ac7c 100644
--- a/drivers/net/ngbe/ngbe_ethdev.c
+++ b/drivers/net/ngbe/ngbe_ethdev.c
@@ -314,6 +314,7 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
struct rte_intr_handle *intr_handle = pci_dev->intr_handle;
const struct rte_memzone *mz;
uint32_t ctrl_ext;
+ u32 led_conf = 0;
int err, ret;
PMD_INIT_FUNC_TRACE();
@@ -401,6 +402,12 @@ eth_ngbe_dev_init(struct rte_eth_dev *eth_dev, void *init_params __rte_unused)
return -EIO;
}
+ err = hw->phy.led_oem_chk(hw, &led_conf);
+ if (err == 0)
+ hw->led_conf = led_conf;
+ else
+ hw->led_conf = 0xFFFF;
+
err = hw->mac.init_hw(hw);
if (err != 0) {
PMD_INIT_LOG(ERR, "Hardware Initialization Failure: %d", err);
diff --git a/drivers/net/txgbe/base/txgbe_hw.c b/drivers/net/txgbe/base/txgbe_hw.c
index 00a8db78bf..db8ffe61a4 100644
--- a/drivers/net/txgbe/base/txgbe_hw.c
+++ b/drivers/net/txgbe/base/txgbe_hw.c
@@ -529,12 +529,9 @@ s32 txgbe_led_on(struct txgbe_hw *hw, u32 index)
DEBUGFUNC("txgbe_led_on");
- if (index > 4)
- return TXGBE_ERR_PARAM;
-
/* To turn on the LED, set mode to ON. */
- led_reg |= TXGBE_LEDCTL_SEL(index);
- led_reg |= TXGBE_LEDCTL_ORD(index);
+ led_reg |= index << TXGBE_LEDCTL_ORD_SHIFT;
+ led_reg |= index;
wr32(hw, TXGBE_LEDCTL, led_reg);
txgbe_flush(hw);
@@ -552,12 +549,9 @@ s32 txgbe_led_off(struct txgbe_hw *hw, u32 index)
DEBUGFUNC("txgbe_led_off");
- if (index > 4)
- return TXGBE_ERR_PARAM;
-
/* To turn off the LED, set mode to OFF. */
- led_reg &= ~(TXGBE_LEDCTL_SEL(index));
- led_reg &= ~(TXGBE_LEDCTL_ORD(index));
+ led_reg &= ~(index << TXGBE_LEDCTL_ORD_SHIFT);
+ led_reg |= index;
wr32(hw, TXGBE_LEDCTL, led_reg);
txgbe_flush(hw);
@@ -3054,6 +3048,10 @@ void txgbe_disable_tx_laser_multispeed_fiber(struct txgbe_hw *hw)
if (txgbe_check_reset_blocked(hw))
return;
+ if (txgbe_close_notify(hw))
+ txgbe_led_off(hw, TXGBE_LEDCTL_UP | TXGBE_LEDCTL_10G |
+ TXGBE_LEDCTL_1G | TXGBE_LEDCTL_ACTIVE);
+
/* Disable Tx laser; allow 100us to go dark per spec */
esdp_reg |= (TXGBE_GPIOBIT_0 | TXGBE_GPIOBIT_1);
wr32(hw, TXGBE_GPIODATA, esdp_reg);
@@ -3073,6 +3071,9 @@ void txgbe_enable_tx_laser_multispeed_fiber(struct txgbe_hw *hw)
{
u32 esdp_reg = rd32(hw, TXGBE_GPIODATA);
+ if (txgbe_open_notify(hw))
+ wr32(hw, TXGBE_LEDCTL, 0);
+
/* Enable Tx laser; allow 100ms to light up */
esdp_reg &= ~(TXGBE_GPIOBIT_0 | TXGBE_GPIOBIT_1);
wr32(hw, TXGBE_GPIODATA, esdp_reg);
diff --git a/drivers/net/txgbe/base/txgbe_mng.c b/drivers/net/txgbe/base/txgbe_mng.c
index dbe512122c..d0aa665d4a 100644
--- a/drivers/net/txgbe/base/txgbe_mng.c
+++ b/drivers/net/txgbe/base/txgbe_mng.c
@@ -82,6 +82,11 @@ txgbe_hic_unlocked(struct txgbe_hw *hw, u32 *buffer, u32 length, u32 timeout)
return TXGBE_ERR_HOST_INTERFACE_COMMAND;
}
+ if ((rd32(hw, TXGBE_MNGMBX) & 0xff0000) >> 16 == 0x80) {
+ DEBUGOUT("It's unknown command.\n");
+ return TXGBE_ERR_MNG_ACCESS_FAILED;
+ }
+
return 0;
}
@@ -262,6 +267,70 @@ s32 txgbe_hic_sr_write(struct txgbe_hw *hw, u32 addr, u8 *buf, int len)
return err;
}
+s32 txgbe_close_notify(struct txgbe_hw *hw)
+{
+ u32 tmp;
+ s32 status;
+ struct txgbe_hic_write_shadow_ram buffer;
+
+ DEBUGFUNC("txgbe_close_notify");
+
+ buffer.hdr.req.cmd = FW_DW_CLOSE_NOTIFY;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = 0;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* one word */
+ buffer.length = 0;
+ buffer.address = 0;
+
+ status = txgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ TXGBE_HI_COMMAND_TIMEOUT, false);
+ if (status)
+ return status;
+
+ tmp = rd32(hw, TXGBE_MNGSWSYNC);
+ if (tmp == TXGBE_CHECKSUM_CAP_ST_PASS)
+ status = 0;
+ else
+ status = TXGBE_ERR_EEPROM_CHECKSUM;
+
+ return status;
+}
+
+s32 txgbe_open_notify(struct txgbe_hw *hw)
+{
+ u32 tmp;
+ s32 status;
+ struct txgbe_hic_write_shadow_ram buffer;
+
+ DEBUGFUNC("txgbe_open_notify");
+
+ buffer.hdr.req.cmd = FW_DW_OPEN_NOTIFY;
+ buffer.hdr.req.buf_lenh = 0;
+ buffer.hdr.req.buf_lenl = 0;
+ buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM;
+
+ /* one word */
+ buffer.length = 0;
+ buffer.address = 0;
+
+ status = txgbe_host_interface_command(hw, (u32 *)&buffer,
+ sizeof(buffer),
+ TXGBE_HI_COMMAND_TIMEOUT, false);
+ if (status)
+ return status;
+
+ tmp = rd32(hw, TXGBE_MNGSWSYNC);
+ if (tmp == TXGBE_CHECKSUM_CAP_ST_PASS)
+ status = 0;
+ else
+ status = TXGBE_ERR_EEPROM_CHECKSUM;
+
+ return status;
+}
+
/**
* txgbe_hic_set_drv_ver - Sends driver version to firmware
* @hw: pointer to the HW structure
diff --git a/drivers/net/txgbe/base/txgbe_mng.h b/drivers/net/txgbe/base/txgbe_mng.h
index 1004f41c72..24d938fecf 100644
--- a/drivers/net/txgbe/base/txgbe_mng.h
+++ b/drivers/net/txgbe/base/txgbe_mng.h
@@ -51,6 +51,11 @@
#define FW_PHY_TOKEN_DELAY 5 /* milliseconds */
#define FW_PHY_TOKEN_WAIT 5 /* seconds */
#define FW_PHY_TOKEN_RETRIES ((FW_PHY_TOKEN_WAIT * 1000) / FW_PHY_TOKEN_DELAY)
+#define FW_DW_OPEN_NOTIFY 0xE9
+#define FW_DW_CLOSE_NOTIFY 0xEA
+
+#define TXGBE_CHECKSUM_CAP_ST_PASS 0x80658383
+#define TXGBE_CHECKSUM_CAP_ST_FAIL 0x70657376
/* Host Interface Command Structures */
struct txgbe_hic_hdr {
@@ -168,6 +173,8 @@ struct txgbe_hic_upg_verify {
s32 txgbe_hic_sr_read(struct txgbe_hw *hw, u32 addr, u8 *buf, int len);
s32 txgbe_hic_sr_write(struct txgbe_hw *hw, u32 addr, u8 *buf, int len);
+s32 txgbe_close_notify(struct txgbe_hw *hw);
+s32 txgbe_open_notify(struct txgbe_hw *hw);
s32 txgbe_hic_set_drv_ver(struct txgbe_hw *hw, u8 maj, u8 min, u8 build,
u8 ver, u16 len, const char *str);
diff --git a/drivers/net/txgbe/base/txgbe_regs.h b/drivers/net/txgbe/base/txgbe_regs.h
index 144047ba62..3139796911 100644
--- a/drivers/net/txgbe/base/txgbe_regs.h
+++ b/drivers/net/txgbe/base/txgbe_regs.h
@@ -302,11 +302,13 @@
#define TXGBE_TEREDOPORT 0x01441C
#define TXGBE_LEDCTL 0x014424
#define TXGBE_LEDCTL_SEL_MASK MS(0, 0xFFFF)
-#define TXGBE_LEDCTL_SEL(s) MS((s), 0x1)
-#define TXGBE_LEDCTL_ORD_MASK MS(16, 0xFFFF)
-#define TXGBE_LEDCTL_ORD(s) MS(((s)+16), 0x1)
- /* s=UP(0),10G(1),1G(2),100M(3),BSY(4) */
-#define TXGBE_LEDCTL_ACTIVE (TXGBE_LEDCTL_SEL(4) | TXGBE_LEDCTL_ORD(4))
+#define TXGBE_LEDCTL_ORD_MASK MS(16, 0xFFFF)
+#define TXGBE_LEDCTL_ORD_SHIFT 16
+#define TXGBE_LEDCTL_UP MS(0, 0x1)
+#define TXGBE_LEDCTL_10G MS(1, 0x1)
+#define TXGBE_LEDCTL_1G MS(2, 0x1)
+#define TXGBE_LEDCTL_100M MS(3, 0x1)
+#define TXGBE_LEDCTL_ACTIVE MS(4, 0x1)
#define TXGBE_TAGTPID(i) (0x014430 + (i) * 4) /* 0-3 */
#define TXGBE_TAGTPID_LSB_MASK MS(0, 0xFFFF)
#define TXGBE_TAGTPID_LSB(v) LS(v, 0, 0xFFFF)
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index ac4d4e08f4..4799a60116 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -3166,7 +3166,7 @@ txgbe_dev_led_on(struct rte_eth_dev *dev)
struct txgbe_hw *hw;
hw = TXGBE_DEV_HW(dev);
- return txgbe_led_on(hw, 4) == 0 ? 0 : -ENOTSUP;
+ return txgbe_led_on(hw, TXGBE_LEDCTL_ACTIVE) == 0 ? 0 : -ENOTSUP;
}
static int
@@ -3175,7 +3175,7 @@ txgbe_dev_led_off(struct rte_eth_dev *dev)
struct txgbe_hw *hw;
hw = TXGBE_DEV_HW(dev);
- return txgbe_led_off(hw, 4) == 0 ? 0 : -ENOTSUP;
+ return txgbe_led_off(hw, TXGBE_LEDCTL_ACTIVE) == 0 ? 0 : -ENOTSUP;
}
static int
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 8/9] net/txgbe: fix to set link up and down
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (6 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 7/9] net: add LED OEM support for wangxun devices Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
2022-02-08 10:11 ` [PATCH 9/9] net/txgbe: fix KR auto-negotiation Jiawen Wu
8 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
Add hw->dev_start status in the flow of setting link up/down, to avoid
obtaining link status inconsistent with the settings.
Fixes: 12a653eb53e1 ("net/txgbe: fix link status when device stopped")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/txgbe_ethdev.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/txgbe/txgbe_ethdev.c b/drivers/net/txgbe/txgbe_ethdev.c
index 4799a60116..6bc209e661 100644
--- a/drivers/net/txgbe/txgbe_ethdev.c
+++ b/drivers/net/txgbe/txgbe_ethdev.c
@@ -1937,6 +1937,7 @@ txgbe_dev_set_link_up(struct rte_eth_dev *dev)
} else {
/* Turn on the laser */
hw->mac.enable_tx_laser(hw);
+ hw->dev_start = true;
txgbe_dev_link_update(dev, 0);
}
@@ -1957,6 +1958,7 @@ txgbe_dev_set_link_down(struct rte_eth_dev *dev)
} else {
/* Turn off the laser */
hw->mac.disable_tx_laser(hw);
+ hw->dev_start = false;
txgbe_dev_link_update(dev, 0);
}
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* [PATCH 9/9] net/txgbe: fix KR auto-negotiation
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
` (7 preceding siblings ...)
2022-02-08 10:11 ` [PATCH 8/9] net/txgbe: fix to set link up and down Jiawen Wu
@ 2022-02-08 10:11 ` Jiawen Wu
8 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-08 10:11 UTC (permalink / raw)
To: dev; +Cc: Jiawen Wu, stable
Fix failure to enter auto-negotiation mode on some firmware versions for
KR NICs.
Fixes: f611dada1af8 ("net/txgbe: update link setup process of backplane NICs")
Cc: stable@dpdk.org
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
---
drivers/net/txgbe/base/txgbe_phy.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/net/txgbe/base/txgbe_phy.c b/drivers/net/txgbe/base/txgbe_phy.c
index 3f5229ecc2..3fb929f37a 100644
--- a/drivers/net/txgbe/base/txgbe_phy.c
+++ b/drivers/net/txgbe/base/txgbe_phy.c
@@ -1455,6 +1455,10 @@ txgbe_set_link_to_kr(struct txgbe_hw *hw, bool autoneg)
if (!(hw->devarg.auto_neg == 1)) {
wr32_epcs(hw, SR_AN_CTRL, 0);
wr32_epcs(hw, VR_AN_KR_MODE_CL, 0);
+ } else {
+ value = rd32_epcs(hw, TXGBE_PHY_TX_EQ_CTL1);
+ value &= ~(1 << 6);
+ wr32_epcs(hw, TXGBE_PHY_TX_EQ_CTL1, value);
}
if (hw->devarg.present == 1) {
value = rd32_epcs(hw, TXGBE_PHY_TX_EQ_CTL1);
--
2.21.0.windows.1
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 3/9] net/ngbe: fix Tx pending
2022-02-08 10:11 ` [PATCH 3/9] net/ngbe: fix Tx pending Jiawen Wu
@ 2022-02-08 17:38 ` Ferruh Yigit
0 siblings, 0 replies; 17+ messages in thread
From: Ferruh Yigit @ 2022-02-08 17:38 UTC (permalink / raw)
To: Jiawen Wu, dev; +Cc: stable
On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> Add commands requesting firmware to enable or disable PCIe bus master.
> Disable PCIe master access to clear BME when stop hardware, and verify
> there are no pending requests.
>
Hi Jiawen,
Can you please describe more what is fixed in this patch?
As far as I understand PCI-e bus hang during HW stop is fixed, by disabling
pci-e bus master.
But patch title mentions from Tx, can you please clarify the relation?
Thanks,
ferruh
> Fixes: 78710873c2f3 ("net/ngbe: add HW initialization")
> Cc: stable@dpdk.org
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
<...>
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 4/9] net/ngbe: fix RxTx packet statistics
2022-02-08 10:11 ` [PATCH 4/9] net/ngbe: fix RxTx packet statistics Jiawen Wu
@ 2022-02-08 17:38 ` Ferruh Yigit
0 siblings, 0 replies; 17+ messages in thread
From: Ferruh Yigit @ 2022-02-08 17:38 UTC (permalink / raw)
To: Jiawen Wu, dev; +Cc: stable
On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> Fix specific length packet statistics caused by wrong register addresses.
>
> Fixes: ed5f3bd3373e ("net/ngbe: define registers")
> Cc:stable@dpdk.org
>
> Signed-off-by: Jiawen Wu<jiawenwu@trustnetic.com>
For patch title, when something affects both Rx and Tx, I think we can
drop it, like:
net/ngbe: fix packet statistics
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 5/9] net/ngbe: optimize the PHY initialization process
2022-02-08 10:11 ` [PATCH 5/9] net/ngbe: optimize the PHY initialization process Jiawen Wu
@ 2022-02-08 17:39 ` Ferruh Yigit
2022-02-09 2:38 ` Jiawen Wu
0 siblings, 1 reply; 17+ messages in thread
From: Ferruh Yigit @ 2022-02-08 17:39 UTC (permalink / raw)
To: Jiawen Wu, dev; +Cc: Luca Boccassi, Kevin Traynor
On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> Reduce the probability of PHY init failure, And add its error return.
>
Patch is missing stable tag, is it intentional?
Or do you want patch not to be backported?
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
<...>
> @@ -234,17 +242,7 @@ s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
> value |= RTL_BMCR_RESET;
> status = hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, value);
>
> - for (i = 0; i < RTL_PHY_RST_WAIT_PERIOD; i++) {
> - status = hw->phy.read_reg(hw, RTL_BMCR, RTL_DEV_ZERO, &value);
> - if (!(value & RTL_BMCR_RESET))
> - break;
> - msleep(1);
> - }
> -
> - if (i == RTL_PHY_RST_WAIT_PERIOD) {
> - DEBUGOUT("PHY reset polling failed to complete.\n");
> - return NGBE_ERR_RESET_FAILED;
> - }
> + msec_delay(5);
>
There are hardcoded delays added in this patch and other ones in this set,
I just want to remind that this can lead unexpected (and very hard to debug)
errors.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 6/9] net/ngbe: add support to custom PHY interfaces
2022-02-08 10:11 ` [PATCH 6/9] net/ngbe: add support to custom PHY interfaces Jiawen Wu
@ 2022-02-08 17:41 ` Ferruh Yigit
2022-02-09 6:17 ` Jiawen Wu
0 siblings, 1 reply; 17+ messages in thread
From: Ferruh Yigit @ 2022-02-08 17:41 UTC (permalink / raw)
To: Jiawen Wu, dev
On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> Support sub_device ID 61/62/64 for YT8521S SFP, and 51/52 for M88E1512
> PHY.
>
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
<...>
> @@ -69,6 +69,10 @@ New Features
> * Added AES-XCBC support in lookaside protocol (IPsec) for CN9K & CN10K.
> * Added AES-CMAC support in CN9K & CN10K.
>
> +* **Updated Wangxun ngbe driver.**
> +
> + * Added support for devices of custom PHY interfaces.
> +
"Custom PHY" is vague, should we provide more details on added PHY interfaces,
like code names etc....
<...>
> @@ -1815,11 +1816,23 @@ s32 ngbe_set_mac_type(struct ngbe_hw *hw)
> case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
> hw->phy.media_type = ngbe_media_type_copper;
> hw->mac.type = ngbe_mac_em;
> + hw->mac.link_type = ngbe_link_copper;
> + break;
> + case NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP:
> + hw->phy.media_type = ngbe_media_type_copper;
> + hw->mac.type = ngbe_mac_em;
> + hw->mac.link_type = ngbe_link_fiber;
> break;
> case NGBE_SUB_DEV_ID_EM_MVL_SFP:
> case NGBE_SUB_DEV_ID_EM_YT8521S_SFP:
> hw->phy.media_type = ngbe_media_type_fiber;
> hw->mac.type = ngbe_mac_em;
> + hw->mac.link_type = ngbe_link_fiber;
> + break;
> + case NGBE_SUB_DEV_ID_EM_MVL_MIX:
> + hw->phy.media_type = ngbe_media_type_unknown;
> + hw->mac.type = ngbe_mac_em;
> + hw->mac.link_type = ngbe_media_type_unknown;
This gives build error [1] because assigned enum type is wrong, is this
copy/paste error?
../drivers/net/ngbe/base/ngbe_hw.c: In function ‘ngbe_set_mac_type’:
../drivers/net/ngbe/base/ngbe_hw.c:1835:35: error: implicit conversion from ‘enum ngbe_media_type’ to ‘enum ngbe_link_type’ [-Werror=enum-conversion]
1835 | hw->mac.link_type = ngbe_media_type_unknown;
|
[1]
http://mails.dpdk.org/archives/test-report/2022-February/257750.html
<...>
> +s32 ngbe_check_phy_mode_mvl(struct ngbe_hw *hw)
> +{
> + u16 value = 0;
> +
> + /* select page 18 reg 20 */
> + ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 18);
> + ngbe_read_phy_reg_mdi(hw, MVL_GEN_CTL, 0, &value);
> + if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_COPPER) {
> + /* mode select to RGMII-to-copper */
> + hw->phy.type = ngbe_phy_mvl;
> + hw->phy.media_type = ngbe_media_type_copper;
> + hw->mac.link_type = ngbe_link_copper;
> + } else if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_FIBER) {
> + /* mode select to RGMII-to-sfi */
> + hw->phy.type = ngbe_phy_mvl_sfi;
> + hw->phy.media_type = ngbe_media_type_fiber;
> + hw->mac.link_type = ngbe_link_fiber;
> + } else {
> + DEBUGOUT("marvell 88E1512 mode %x is not supported.\n", value);
'DEBUGOUT' already adds '\n' as far as I can see, it log add double line.
There are multiple usages in this patch.
^ permalink raw reply [flat|nested] 17+ messages in thread
* Re: [PATCH 7/9] net: add LED OEM support for wangxun devices
2022-02-08 10:11 ` [PATCH 7/9] net: add LED OEM support for wangxun devices Jiawen Wu
@ 2022-02-08 17:41 ` Ferruh Yigit
0 siblings, 0 replies; 17+ messages in thread
From: Ferruh Yigit @ 2022-02-08 17:41 UTC (permalink / raw)
To: Jiawen Wu, dev
On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> Support custom LED OEM for ngbe and txgbe driver.
>
Can you please split patch for ngbe and txgbe?
Btw, both drivers seems hav LED support (at least '.dev_led_on', '.dev_led_off'
dev ops implemented), can you please add some details in the commit log
what exactly added in this patch?
Also 'doc/guides/nics/features/txgbe.ini' seems missing the 'LED' feature
although dev_ops implemented, can you fix that too.
> Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
<...>
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH 5/9] net/ngbe: optimize the PHY initialization process
2022-02-08 17:39 ` Ferruh Yigit
@ 2022-02-09 2:38 ` Jiawen Wu
0 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-09 2:38 UTC (permalink / raw)
To: 'Ferruh Yigit', dev
Cc: 'Luca Boccassi', 'Kevin Traynor'
On February 9, 2022 1:40 AM, Ferruh Yigit wrote:
> On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> > Reduce the probability of PHY init failure, And add its error return.
> >
>
> Patch is missing stable tag, is it intentional?
> Or do you want patch not to be backported?
>
Because PHY init failed never occurred in our local tests with the original code.
But the problem of failure to link up recently appeared in the customer, which is extremely unlikely, and we think it is related to PHY initialization.
At the driver level, this fix addresses some potential risks. However, due to different hardware (customers use our chips to make their own network cards), this fix cannot be fully proven to be effective.
So this is just an optimization that we think needs to be done.
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>
> <...>
>
> > @@ -234,17 +242,7 @@ s32 ngbe_reset_phy_rtl(struct ngbe_hw *hw)
> > value |= RTL_BMCR_RESET;
> > status = hw->phy.write_reg(hw, RTL_BMCR, RTL_DEV_ZERO, value);
> >
> > - for (i = 0; i < RTL_PHY_RST_WAIT_PERIOD; i++) {
> > - status = hw->phy.read_reg(hw, RTL_BMCR, RTL_DEV_ZERO,
> &value);
> > - if (!(value & RTL_BMCR_RESET))
> > - break;
> > - msleep(1);
> > - }
> > -
> > - if (i == RTL_PHY_RST_WAIT_PERIOD) {
> > - DEBUGOUT("PHY reset polling failed to complete.\n");
> > - return NGBE_ERR_RESET_FAILED;
> > - }
> > + msec_delay(5);
> >
>
> There are hardcoded delays added in this patch and other ones in this set, I just
> want to remind that this can lead unexpected (and very hard to debug) errors.
Yes, this polling never succeeded. So we think hardcoded delay is just required.
^ permalink raw reply [flat|nested] 17+ messages in thread
* RE: [PATCH 6/9] net/ngbe: add support to custom PHY interfaces
2022-02-08 17:41 ` Ferruh Yigit
@ 2022-02-09 6:17 ` Jiawen Wu
0 siblings, 0 replies; 17+ messages in thread
From: Jiawen Wu @ 2022-02-09 6:17 UTC (permalink / raw)
To: 'Ferruh Yigit', dev
On February 9, 2022 1:41 AM, Ferruh Yigit wrote:
> On 2/8/2022 10:11 AM, Jiawen Wu wrote:
> > Support sub_device ID 61/62/64 for YT8521S SFP, and 51/52 for M88E1512
> > PHY.
> >
> > Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
>
> <...>
>
> > @@ -69,6 +69,10 @@ New Features
> > * Added AES-XCBC support in lookaside protocol (IPsec) for CN9K &
> CN10K.
> > * Added AES-CMAC support in CN9K & CN10K.
> >
> > +* **Updated Wangxun ngbe driver.**
> > +
> > + * Added support for devices of custom PHY interfaces.
> > +
>
> "Custom PHY" is vague, should we provide more details on added PHY
> interfaces, like code names etc....
>
> <...>
>
> > @@ -1815,11 +1816,23 @@ s32 ngbe_set_mac_type(struct ngbe_hw *hw)
> > case NGBE_SUB_DEV_ID_EM_MVL_RGMII:
> > hw->phy.media_type = ngbe_media_type_copper;
> > hw->mac.type = ngbe_mac_em;
> > + hw->mac.link_type = ngbe_link_copper;
> > + break;
> > + case NGBE_SUB_DEV_ID_EM_RTL_YT8521S_SFP:
> > + hw->phy.media_type = ngbe_media_type_copper;
> > + hw->mac.type = ngbe_mac_em;
> > + hw->mac.link_type = ngbe_link_fiber;
> > break;
> > case NGBE_SUB_DEV_ID_EM_MVL_SFP:
> > case NGBE_SUB_DEV_ID_EM_YT8521S_SFP:
> > hw->phy.media_type = ngbe_media_type_fiber;
> > hw->mac.type = ngbe_mac_em;
> > + hw->mac.link_type = ngbe_link_fiber;
> > + break;
> > + case NGBE_SUB_DEV_ID_EM_MVL_MIX:
> > + hw->phy.media_type = ngbe_media_type_unknown;
> > + hw->mac.type = ngbe_mac_em;
> > + hw->mac.link_type = ngbe_media_type_unknown;
>
> This gives build error [1] because assigned enum type is wrong, is this
> copy/paste error?
>
> ../drivers/net/ngbe/base/ngbe_hw.c: In function ‘ngbe_set_mac_type’:
> ../drivers/net/ngbe/base/ngbe_hw.c:1835:35: error: implicit conversion
> from ‘enum ngbe_media_type’ to ‘enum ngbe_link_type’
> [-Werror=enum-conversion]
> 1835 | hw->mac.link_type =
> ngbe_media_type_unknown;
> |
>
>
> [1]
> http://mails.dpdk.org/archives/test-report/2022-February/257750.html
>
>
> <...>
>
> > +s32 ngbe_check_phy_mode_mvl(struct ngbe_hw *hw) {
> > + u16 value = 0;
> > +
> > + /* select page 18 reg 20 */
> > + ngbe_write_phy_reg_mdi(hw, MVL_PAGE_SEL, 0, 18);
> > + ngbe_read_phy_reg_mdi(hw, MVL_GEN_CTL, 0, &value);
> > + if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_COPPER) {
> > + /* mode select to RGMII-to-copper */
> > + hw->phy.type = ngbe_phy_mvl;
> > + hw->phy.media_type = ngbe_media_type_copper;
> > + hw->mac.link_type = ngbe_link_copper;
> > + } else if (MVL_GEN_CTL_MODE(value) == MVL_GEN_CTL_MODE_FIBER) {
> > + /* mode select to RGMII-to-sfi */
> > + hw->phy.type = ngbe_phy_mvl_sfi;
> > + hw->phy.media_type = ngbe_media_type_fiber;
> > + hw->mac.link_type = ngbe_link_fiber;
> > + } else {
> > + DEBUGOUT("marvell 88E1512 mode %x is not supported.\n", value);
>
> 'DEBUGOUT' already adds '\n' as far as I can see, it log add double line.
>
> There are multiple usages in this patch.
I would fix it in a separate patch.
^ permalink raw reply [flat|nested] 17+ messages in thread
end of thread, other threads:[~2022-02-09 6:17 UTC | newest]
Thread overview: 17+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-02-08 10:11 [PATCH 0/9] Wangxun fixes and supports Jiawen Wu
2022-02-08 10:11 ` [PATCH 1/9] net/ngbe: fix failed to receive packets Jiawen Wu
2022-02-08 10:11 ` [PATCH 2/9] net/ngbe: fix link interrupt sometimes lost Jiawen Wu
2022-02-08 10:11 ` [PATCH 3/9] net/ngbe: fix Tx pending Jiawen Wu
2022-02-08 17:38 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 4/9] net/ngbe: fix RxTx packet statistics Jiawen Wu
2022-02-08 17:38 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 5/9] net/ngbe: optimize the PHY initialization process Jiawen Wu
2022-02-08 17:39 ` Ferruh Yigit
2022-02-09 2:38 ` Jiawen Wu
2022-02-08 10:11 ` [PATCH 6/9] net/ngbe: add support to custom PHY interfaces Jiawen Wu
2022-02-08 17:41 ` Ferruh Yigit
2022-02-09 6:17 ` Jiawen Wu
2022-02-08 10:11 ` [PATCH 7/9] net: add LED OEM support for wangxun devices Jiawen Wu
2022-02-08 17:41 ` Ferruh Yigit
2022-02-08 10:11 ` [PATCH 8/9] net/txgbe: fix to set link up and down Jiawen Wu
2022-02-08 10:11 ` [PATCH 9/9] net/txgbe: fix KR auto-negotiation Jiawen Wu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).