From: Ferruh Yigit <ferruh.yigit@intel.com>
To: John Daley <johndale@cisco.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH v3 3/6] net/enic: flow API for NICs with advanced filters disabled
Date: Wed, 17 May 2017 12:13:09 +0100 [thread overview]
Message-ID: <026046f6-5145-e7c8-a00e-b703e81a1d40@intel.com> (raw)
In-Reply-To: <20170517030348.2663-4-johndale@cisco.com>
On 5/17/2017 4:03 AM, John Daley wrote:
> Flow support for 1300 series adapters with the 'Advanced Filter'
> mode disabled via the UCS management interface. This allows:
> Attributes: ingress
> Items: Outer eth, ipv4, ipv6, udp, sctp, tcp, vxlan. Inner eth, ipv4,
> ipv6, udp, tcp.
> Actions: queue and void
> Selectors: 'is', 'spec' and 'mask'. 'last' is not supported
>
> With advanced filters disabled, an IPv4 or IPv6 item must be specified
> in the pattern.
>
> Signed-off-by: John Daley <johndale@cisco.com>
> Reviewed-by: Nelson Escobar <neescoba@cisco.com>
<...>
> @@ -193,6 +279,10 @@ static const enum rte_flow_action_type enic_supported_actions_v2[] = {
>
> /** Action capabilites indexed by NIC version information */
> static const struct enic_action_cap enic_action_cap[] = {
> + [FILTER_ACTION_RQ_STEERING_FLAG] = {
FILTER_ACTION_RQ_STEERING_FLAG doesn't defined anywhere which is causing
build error, compiler asks if you mean FILTER_ACTION_RQ_STEERING:
drivers/net/enic/enic_flow.c:318:3: error: use of undeclared identifier
'FILTER_ACTION_RQ_STEERING_FLAG'; did you mean 'FILTER_ACTION_RQ_STEERING'?
next prev parent reply other threads:[~2017-05-17 11:13 UTC|newest]
Thread overview: 41+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-30 21:28 [dpdk-dev] [PATCH 1/6] net/enic: bring NIC interface functions up to date John Daley
2017-03-30 21:28 ` [dpdk-dev] [PATCH 2/6] net/enic: flow API skeleton John Daley
2017-03-30 21:28 ` [dpdk-dev] [PATCH 3/6] net/enic: flow API for NICs with advanced filters enabled John Daley
2017-03-30 21:28 ` [dpdk-dev] [PATCH 4/6] net/enic: flow API for NICs with advanced filters disabled John Daley
2017-03-30 21:28 ` [dpdk-dev] [PATCH 5/6] net/enic: flow API support for Legacy NICs John Daley
2017-03-30 21:28 ` [dpdk-dev] [PATCH 6/6] net/enic: flow API debug John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 0/7] *** flow API support for enic *** John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 1/7] net/enic: bring NIC interface functions up to date John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 2/7] net/enic: flow API skeleton John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 3/7] net/enic: flow API for NICs with advanced filters enabled John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 4/7] net/enic: flow API for NICs with advanced filters disabled John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 5/7] net/enic: flow API for Legacy NICs John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 6/7] net/enic: flow API debug John Daley
2017-03-31 2:06 ` [dpdk-dev] [PATCH v2 7/7] net/enic: flow API documentation John Daley
2017-04-02 15:18 ` Mcnamara, John
2017-05-12 12:11 ` Ferruh Yigit
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 0/6] enic flow api support John Daley
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 1/6] net/enic: flow API skeleton John Daley
2017-05-17 11:12 ` Ferruh Yigit
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 2/6] net/enic: flow API for NICs with advanced filters enabled John Daley
2017-05-17 11:12 ` Ferruh Yigit
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 3/6] net/enic: flow API for NICs with advanced filters disabled John Daley
2017-05-17 11:13 ` Ferruh Yigit [this message]
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 4/6] net/enic: flow API for Legacy NICs John Daley
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 5/6] net/enic: flow API debug John Daley
2017-05-17 3:03 ` [dpdk-dev] [PATCH v3 6/6] net/enic: flow API documentation John Daley
2017-05-17 11:13 ` Ferruh Yigit
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 0/8] enic flow api support John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 1/8] net/enic: bring NIC interface functions up to date John Daley
2017-05-22 9:49 ` Ferruh Yigit
2017-06-08 10:44 ` Jerin Jacob
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 2/8] net/enic: flow API skeleton John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 3/8] net/enic: flow API for NICs with advanced filters enabled John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 4/8] net/enic: flow API mark and flag support John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 5/8] net/enic: flow API for NICs with advanced filters disabled John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 6/8] net/enic: flow API for Legacy NICs John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 7/8] net/enic: flow API debug John Daley
2017-05-17 22:38 ` [dpdk-dev] [PATCH v4 8/8] net/enic: flow API documentation John Daley
2017-05-22 10:05 ` [dpdk-dev] [PATCH v4 0/8] enic flow api support Ferruh Yigit
2017-05-17 11:12 ` [dpdk-dev] [PATCH v3 0/6] " Ferruh Yigit
2017-03-31 10:12 ` [dpdk-dev] [PATCH 1/6] net/enic: bring NIC interface functions up to date Ferruh Yigit
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=026046f6-5145-e7c8-a00e-b703e81a1d40@intel.com \
--to=ferruh.yigit@intel.com \
--cc=dev@dpdk.org \
--cc=johndale@cisco.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).