DPDK patches and discussions
 help / color / mirror / Atom feed
From: "Raz Amir" <razamir22@gmail.com>
To: "'Neil Horman'" <nhorman@tuxdriver.com>
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH] pci: save list of detached devices, and re-probe during driver unload
Date: Mon, 2 Mar 2015 10:18:42 +0200	[thread overview]
Message-ID: <032e01d054c1$7fc654f0$7f52fed0$@gmail.com> (raw)
In-Reply-To: <20150301171646.GA32246@neilslaptop.think-freely.org>

The patch I suggest is in the nic_uio freebsd kernel driver. I don't think
that rte_log can be used there.
I checked the contigmem freebsd driver and it uses printf.
I can either remove those printfs, or keep them.
I suggest keeping them as they were very helpful for understanding the flow,
and they don't provide too much output (depending on the amount of
interfaces connected to the nic_uio driver).

How should I continue with this patch?
BTW, I don't see it in incoming patches page at
http://dpdk.org/dev/patchwork/project/dpdk/list/?page=1 
Is it because I missed something in the code contribution instruction?

-----Original Message-----
From: Neil Horman [mailto:nhorman@tuxdriver.com] 
Sent: 01 March 2015 19:17
To: Raz Amir
Cc: dev@dpdk.org
Subject: Re: [dpdk-dev] [PATCH] pci: save list of detached devices, and
re-probe during driver unload

On Sun, Mar 01, 2015 at 04:21:10PM +0200, Raz Amir wrote:
> Can you refer me to the logging facilities you are referring to for 
> this Freebsd driver?
> device_probe_and_attach is an API in Freebsd kernel which is called 
> during
rte_log and friends.

> boot for finding the relevant driver for each device.
> I added manual call to it in the driver unload for re-probing and 
> re-matching the devices that were detached by the driver.
> Before this change, you had to reboot in order to get the devices back.
> 
my bad, I didn't see it defined and was thinking it was removed from an
earlier version of the dpdk.
Neil

> -----Original Message-----
> From: Neil Horman [mailto:nhorman@tuxdriver.com]
> Sent: 01 March 2015 15:48
> To: Raz Amir
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH] pci: save list of detached devices, 
> and re-probe during driver unload
> 
> On Thu, Feb 26, 2015 at 06:33:20AM +0000, Raz Amir wrote:
> > Added code that saves the pointers to the detached devices, during 
> > driver loading, and during driver unloading, go over the list, and 
> > re-attach them by calling device_probe_and_attach on each device.
> > 
> > Signed-off-by: Raz Amir <razamir22@gmail.com>
> > ---
> >  lib/librte_eal/bsdapp/nic_uio/nic_uio.c | 26 
> > +++++++++++++++++++++++++-
> >  1 file changed, 25 insertions(+), 1 deletion(-)
> > 
> > diff --git a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> > index 5ae8560..7d702a5 100644
> > --- a/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> > +++ b/lib/librte_eal/bsdapp/nic_uio/nic_uio.c
> > @@ -55,6 +55,9 @@ __FBSDID("$FreeBSD$");
> >  
> >  #define MAX_BARS (PCIR_MAX_BAR_0 + 1)
> >  
> > +#define MAX_DETACHED_DEVICES	128
> > +static device_t detached_devices[MAX_DETACHED_DEVICES] = {}; static 
> > +int last_detached = 0;
> >  
> >  struct nic_uio_softc {
> >  	device_t        dev_t;
> > @@ -291,14 +294,35 @@ nic_uio_load(void)
> >  		if (dev != NULL)
> >  			for (i = 0; i < NUM_DEVICES; i++)
> >  				if (pci_get_vendor(dev) == devices[i].vend
> &&
> > -						pci_get_device(dev) ==
> devices[i].dev)
> > +						pci_get_device(dev) ==
> devices[i].dev) {
> > +							if (last_detached+1
> < MAX_DETACHED_DEVICES) {
> > +
> printf("nic_uio_load: detaching and storing dev=%p\n", dev); No 
> printfs.  Use the logging facilities
> 
> > +
> detached_devices[last_detached++] = dev;
> > +							}
> > +							else {
> > +
> printf("nic_uio_load: reached MAX_DETACHED_DEVICES=%d. dev=%p won't be 
> reattached\n",
> > +
> MAX_DETACHED_DEVICES, dev);
> Dittto
> 
> > +							}
> > +								
> >  							device_detach(dev);
> > +				}
> >  	}
> >  }
> >  
> >  static void
> >  nic_uio_unload(void)
> >  {
> > +	int i;
> > +	printf("nic_uio_unload: entered ... \n");
> > +
> > +	for (i = 0; i < last_detached; i++) {
> > +		printf("nic_uio_unload: calling to device_probe_and_attach
> for dev=%p...\n",
> > +			detached_devices[i]);
> > +		device_probe_and_attach(detached_devices[i]);
> Where is this defined?  It doesn't appear to be in the latest dpdk.
> 
> > +		printf("nic_uio_unload: done.\n");
> > +	}
> > +
> > +	printf("nic_uio_unload: leaving ... \n");
> >  }
> >  
> >  static int
> > --
> > 2.1.2
> > 
> > 
> 
> 

  reply	other threads:[~2015-03-02  8:19 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-26  6:33 Raz Amir
2015-03-01 13:48 ` Neil Horman
2015-03-01 14:21   ` Raz Amir
2015-03-01 17:16     ` Neil Horman
2015-03-02  8:18       ` Raz Amir [this message]
2015-03-02 11:36         ` Neil Horman
2015-03-02 11:58           ` Raz Amir
2015-03-02 13:29             ` Thomas Monjalon
2015-03-03 11:30               ` Raz Amir
2015-03-03 11:45                 ` Bruce Richardson
2015-03-03 12:56                   ` Raz Amir
2015-03-03 13:32 ` Bruce Richardson
2015-03-04  9:07   ` Raz Amir
2015-03-04 10:13     ` Bruce Richardson
2015-03-04 10:28       ` Raz Amir
2015-03-04 11:15 ` [dpdk-dev] [PATCH v3] " Raz Amir
2015-03-09  8:07   ` Raz Amir
2015-03-09 10:27     ` Bruce Richardson
2015-03-10  8:15       ` Raz Amir
2015-03-04 11:47 ` [dpdk-dev] [PATCH v2] " Raz Amir
2015-03-05 14:59 ` [dpdk-dev] [PATCH v4] " Raz Amir
2015-03-05 16:24 ` Raz Amir
2015-03-11 10:26   ` Bruce Richardson
2015-03-12 12:24     ` Raz Amir
2015-03-16 16:29       ` Thomas Monjalon
2015-07-08 22:51         ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='032e01d054c1$7fc654f0$7f52fed0$@gmail.com' \
    --to=razamir22@gmail.com \
    --cc=dev@dpdk.org \
    --cc=nhorman@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).