DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler
@ 2018-06-07  1:31 Qi Zhang
  2018-06-07  7:14 ` Xing, Beilei
  2018-06-27  3:48 ` Xing, Beilei
  0 siblings, 2 replies; 5+ messages in thread
From: Qi Zhang @ 2018-06-07  1:31 UTC (permalink / raw)
  To: beilei.xing; +Cc: jingjing.wu, de.yu, dev, Qi Zhang

For i40evf, internal rx interrupt and adminq interrupt share the same
source, that cause a lot cpu cycles be wasted on interrupt handler
on rx path. This is complained by customers which require low latency
(when set I40E_ITR_INTERVAL to small value), but have to be sufferred by
tremendous interrupts handling that eat significant CPU resources.

The patch disable pci interrupt and remove the interrupt handler,
replace it with a low frequency (50ms) interrupt polling daemon
which is implemented by registering a alarm callback periodly, this
save CPU time significently: On a typical x86 server with 2.1GHz CPU,
with low latency configure (32us) we saw CPU usage from top commmand
reduced from 20% to 0% on management core in testpmd).

Also with the new method we can remove compile option: I40E_ITR_INTERVAL
which is used to balance between low latency and low CPU usage previously.
Now we don't need it since we can reach both at same time.

Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
---
 config/common_base                |  2 --
 drivers/net/i40e/i40e_ethdev.c    |  3 +--
 drivers/net/i40e/i40e_ethdev.h    | 22 +++++++++++-----------
 drivers/net/i40e/i40e_ethdev_vf.c | 36 ++++++++++++++----------------------
 4 files changed, 26 insertions(+), 37 deletions(-)

diff --git a/config/common_base b/config/common_base
index 6b0d1cbbb..9e21c6865 100644
--- a/config/common_base
+++ b/config/common_base
@@ -264,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
 CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
 CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
-# interval up to 8160 us, aligned to 2 (or default value)
-CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
 
 #
 # Compile burst-oriented FM10K PMD
diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
index 13c5d3296..c8f9566e0 100644
--- a/drivers/net/i40e/i40e_ethdev.c
+++ b/drivers/net/i40e/i40e_ethdev.c
@@ -1829,8 +1829,7 @@ __vsi_queues_bind_intr(struct i40e_vsi *vsi, uint16_t msix_vect,
 	/* Write first RX queue to Link list register as the head element */
 	if (vsi->type != I40E_VSI_SRIOV) {
 		uint16_t interval =
-			i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 1,
-					       pf->support_multi_driver);
+			i40e_calc_itr_interval(1, pf->support_multi_driver);
 
 		if (msix_vect == I40E_MISC_VEC_ID) {
 			I40E_WRITE_REG(hw, I40E_PFINT_LNKLST0,
diff --git a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
index 11c4c76bd..599993dac 100644
--- a/drivers/net/i40e/i40e_ethdev.h
+++ b/drivers/net/i40e/i40e_ethdev.h
@@ -178,7 +178,7 @@ enum i40e_flxpld_layer_idx {
 #define I40E_ITR_INDEX_NONE             3
 #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
 #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
-#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 8160 /* 8160 us */
+#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
 /* Special FW support this floating VEB feature */
 #define FLOATING_VEB_SUPPORTED_FW_MAJ 5
 #define FLOATING_VEB_SUPPORTED_FW_MIN 0
@@ -1328,17 +1328,17 @@ i40e_align_floor(int n)
 }
 
 static inline uint16_t
-i40e_calc_itr_interval(int16_t interval, bool is_pf, bool is_multi_drv)
+i40e_calc_itr_interval(bool is_pf, bool is_multi_drv)
 {
-	if (interval < 0 || interval > I40E_QUEUE_ITR_INTERVAL_MAX) {
-		if (is_multi_drv) {
-			interval = I40E_QUEUE_ITR_INTERVAL_MAX;
-		} else {
-			if (is_pf)
-				interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
-			else
-				interval = I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
-		}
+	uint16_t interval = 0;
+
+	if (is_multi_drv) {
+		interval = I40E_QUEUE_ITR_INTERVAL_MAX;
+	} else {
+		if (is_pf)
+			interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
+		else
+			interval = I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
 	}
 
 	/* Convert to hardware count, as writing each 1 represents 2 us */
diff --git a/drivers/net/i40e/i40e_ethdev_vf.c b/drivers/net/i40e/i40e_ethdev_vf.c
index 804e44530..ad5c069e8 100644
--- a/drivers/net/i40e/i40e_ethdev_vf.c
+++ b/drivers/net/i40e/i40e_ethdev_vf.c
@@ -44,6 +44,8 @@
 #define I40EVF_BUSY_WAIT_COUNT 50
 #define MAX_RESET_WAIT_CNT     20
 
+#define I40EVF_ALARM_INTERVAL 50000 /* us */
+
 struct i40evf_arq_msg_info {
 	enum virtchnl_ops ops;
 	enum i40e_status_code result;
@@ -1133,7 +1135,7 @@ i40evf_init_vf(struct rte_eth_dev *dev)
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
 	uint16_t interval =
-		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
+		i40e_calc_itr_interval(0, 0);
 
 	vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
 	vf->dev_data = dev->data;
@@ -1370,7 +1372,7 @@ i40evf_handle_aq_msg(struct rte_eth_dev *dev)
  *  void
  */
 static void
-i40evf_dev_interrupt_handler(void *param)
+i40evf_dev_alarm_handler(void *param)
 {
 	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
@@ -1399,6 +1401,8 @@ i40evf_dev_interrupt_handler(void *param)
 
 done:
 	i40evf_enable_irq0(hw);
+	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
+			  i40evf_dev_alarm_handler, dev);
 }
 
 static int
@@ -1442,12 +1446,8 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
 		return -1;
 	}
 
-	/* register callback func to eal lib */
-	rte_intr_callback_register(&pci_dev->intr_handle,
-		i40evf_dev_interrupt_handler, (void *)eth_dev);
-
-	/* enable uio intr after callback register */
-	rte_intr_enable(&pci_dev->intr_handle);
+	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
+			  i40evf_dev_alarm_handler, eth_dev);
 
 	/* configure and enable device interrupt */
 	i40evf_enable_irq0(hw);
@@ -1836,7 +1836,7 @@ i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
 	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
 	uint16_t interval =
-		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
+		i40e_calc_itr_interval(0, 0);
 	uint16_t msix_intr;
 
 	msix_intr = intr_handle->intr_vec[queue_id];
@@ -1859,8 +1859,6 @@ i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t queue_id)
 
 	I40EVF_WRITE_FLUSH(hw);
 
-	rte_intr_enable(&pci_dev->intr_handle);
-
 	return 0;
 }
 
@@ -2023,10 +2021,8 @@ i40evf_dev_start(struct rte_eth_dev *dev)
 	 * queue interrupt to other VFIO vectors.
 	 * So clear uio/vfio intr/evevnfd first to avoid failure.
 	 */
-	if (dev->data->dev_conf.intr_conf.rxq != 0) {
-		rte_intr_disable(intr_handle);
+	if (dev->data->dev_conf.intr_conf.rxq != 0)
 		rte_intr_enable(intr_handle);
-	}
 
 	i40evf_enable_queues_intr(dev);
 
@@ -2050,6 +2046,9 @@ i40evf_dev_stop(struct rte_eth_dev *dev)
 
 	PMD_INIT_FUNC_TRACE();
 
+	if (dev->data->dev_conf.intr_conf.rxq != 0)
+		rte_intr_disable(intr_handle);
+
 	if (hw->adapter_stopped == 1)
 		return;
 	i40evf_stop_queues(dev);
@@ -2285,9 +2284,8 @@ static void
 i40evf_dev_close(struct rte_eth_dev *dev)
 {
 	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
-	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
-	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
 
+	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
 	i40evf_dev_stop(dev);
 	i40e_dev_free_queues(dev);
 	/*
@@ -2300,12 +2298,6 @@ i40evf_dev_close(struct rte_eth_dev *dev)
 
 	i40evf_reset_vf(hw);
 	i40e_shutdown_adminq(hw);
-	/* disable uio intr before callback unregister */
-	rte_intr_disable(intr_handle);
-
-	/* unregister callback func from eal lib */
-	rte_intr_callback_unregister(intr_handle,
-				     i40evf_dev_interrupt_handler, dev);
 	i40evf_disable_irq0(hw);
 }
 
-- 
2.13.6

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler
  2018-06-07  1:31 [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler Qi Zhang
@ 2018-06-07  7:14 ` Xing, Beilei
  2018-06-07 13:16   ` Zhang, Qi Z
  2018-06-27  3:48 ` Xing, Beilei
  1 sibling, 1 reply; 5+ messages in thread
From: Xing, Beilei @ 2018-06-07  7:14 UTC (permalink / raw)
  To: Zhang, Qi Z; +Cc: Wu, Jingjing, Yu, De, dev



> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Thursday, June 7, 2018 9:32 AM
> To: Xing, Beilei <beilei.xing@intel.com>
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: [PATCH] net/i40e: remove VF interrupt handler
> 
> For i40evf, internal rx interrupt and adminq interrupt share the same source,
> that cause a lot cpu cycles be wasted on interrupt handler on rx path. This is
> complained by customers which require low latency (when set
> I40E_ITR_INTERVAL to small value), but have to be sufferred by tremendous
> interrupts handling that eat significant CPU resources.
> 
> The patch disable pci interrupt and remove the interrupt handler, replace it
> with a low frequency (50ms) interrupt polling daemon which is implemented
> by registering a alarm callback periodly, this save CPU time significently: On a
> typical x86 server with 2.1GHz CPU, with low latency configure (32us) we saw
> CPU usage from top commmand reduced from 20% to 0% on management
> core in testpmd).
> 
> Also with the new method we can remove compile option:
> I40E_ITR_INTERVAL which is used to balance between low latency and low
> CPU usage previously.
> Now we don't need it since we can reach both at same time.
> 
> Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> ---
>  config/common_base                |  2 --
>  drivers/net/i40e/i40e_ethdev.c    |  3 +--
>  drivers/net/i40e/i40e_ethdev.h    | 22 +++++++++++-----------
>  drivers/net/i40e/i40e_ethdev_vf.c | 36 ++++++++++++++----------------------
>  4 files changed, 26 insertions(+), 37 deletions(-)
> 
> diff --git a/config/common_base b/config/common_base index
> 6b0d1cbbb..9e21c6865 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -264,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
>  CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
>  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
>  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
> -# interval up to 8160 us, aligned to 2 (or default value)
> -CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1

Then description about CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL in documentation should also be removed.

Beilei

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler
  2018-06-07  7:14 ` Xing, Beilei
@ 2018-06-07 13:16   ` Zhang, Qi Z
  0 siblings, 0 replies; 5+ messages in thread
From: Zhang, Qi Z @ 2018-06-07 13:16 UTC (permalink / raw)
  To: Xing, Beilei; +Cc: Wu, Jingjing, Yu, De, dev



> -----Original Message-----
> From: Xing, Beilei
> Sent: Thursday, June 7, 2018 3:14 PM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> dev@dpdk.org
> Subject: RE: [PATCH] net/i40e: remove VF interrupt handler
> 
> 
> 
> > -----Original Message-----
> > From: Zhang, Qi Z
> > Sent: Thursday, June 7, 2018 9:32 AM
> > To: Xing, Beilei <beilei.xing@intel.com>
> > Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> > dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> > Subject: [PATCH] net/i40e: remove VF interrupt handler
> >
> > For i40evf, internal rx interrupt and adminq interrupt share the same
> > source, that cause a lot cpu cycles be wasted on interrupt handler on
> > rx path. This is complained by customers which require low latency
> > (when set I40E_ITR_INTERVAL to small value), but have to be sufferred
> > by tremendous interrupts handling that eat significant CPU resources.
> >
> > The patch disable pci interrupt and remove the interrupt handler,
> > replace it with a low frequency (50ms) interrupt polling daemon which
> > is implemented by registering a alarm callback periodly, this save CPU
> > time significently: On a typical x86 server with 2.1GHz CPU, with low
> > latency configure (32us) we saw CPU usage from top commmand reduced
> > from 20% to 0% on management core in testpmd).
> >
> > Also with the new method we can remove compile option:
> > I40E_ITR_INTERVAL which is used to balance between low latency and low
> > CPU usage previously.
> > Now we don't need it since we can reach both at same time.
> >
> > Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
> > Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> > ---
> >  config/common_base                |  2 --
> >  drivers/net/i40e/i40e_ethdev.c    |  3 +--
> >  drivers/net/i40e/i40e_ethdev.h    | 22 +++++++++++-----------
> >  drivers/net/i40e/i40e_ethdev_vf.c | 36
> > ++++++++++++++----------------------
> >  4 files changed, 26 insertions(+), 37 deletions(-)
> >
> > diff --git a/config/common_base b/config/common_base index
> > 6b0d1cbbb..9e21c6865 100644
> > --- a/config/common_base
> > +++ b/config/common_base
> > @@ -264,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
> >  CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
> >  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
> >  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
> > -# interval up to 8160 us, aligned to 2 (or default value)
> > -CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
> 
> Then description about CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL in
> documentation should also be removed.

Good capture, will fix this in v2

Thanks
Qi
> 
> Beilei

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler
  2018-06-07  1:31 [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler Qi Zhang
  2018-06-07  7:14 ` Xing, Beilei
@ 2018-06-27  3:48 ` Xing, Beilei
  2018-06-27  3:59   ` Zhang, Qi Z
  1 sibling, 1 reply; 5+ messages in thread
From: Xing, Beilei @ 2018-06-27  3:48 UTC (permalink / raw)
  To: Zhang, Qi Z; +Cc: Wu, Jingjing, Yu, De, dev



> -----Original Message-----
> From: Zhang, Qi Z
> Sent: Thursday, June 7, 2018 9:32 AM
> To: Xing, Beilei <beilei.xing@intel.com>
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> Subject: [PATCH] net/i40e: remove VF interrupt handler
> 
> For i40evf, internal rx interrupt and adminq interrupt share the same source,
> that cause a lot cpu cycles be wasted on interrupt handler on rx path. This is
> complained by customers which require low latency (when set
> I40E_ITR_INTERVAL to small value), but have to be sufferred by tremendous
> interrupts handling that eat significant CPU resources.
> 
> The patch disable pci interrupt and remove the interrupt handler, replace it
> with a low frequency (50ms) interrupt polling daemon which is implemented
> by registering a alarm callback periodly, this save CPU time significently: On a
> typical x86 server with 2.1GHz CPU, with low latency configure (32us) we saw
> CPU usage from top commmand reduced from 20% to 0% on management
> core in testpmd).
> 
> Also with the new method we can remove compile option:
> I40E_ITR_INTERVAL which is used to balance between low latency and low
> CPU usage previously.
> Now we don't need it since we can reach both at same time.
> 
> Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
> Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> ---
>  config/common_base                |  2 --
>  drivers/net/i40e/i40e_ethdev.c    |  3 +--
>  drivers/net/i40e/i40e_ethdev.h    | 22 +++++++++++-----------
>  drivers/net/i40e/i40e_ethdev_vf.c | 36 ++++++++++++++----------------------
>  4 files changed, 26 insertions(+), 37 deletions(-)
> 
> diff --git a/config/common_base b/config/common_base index
> 6b0d1cbbb..9e21c6865 100644
> --- a/config/common_base
> +++ b/config/common_base
> @@ -264,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
>  CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
>  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
>  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
> -# interval up to 8160 us, aligned to 2 (or default value)
> -CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1

Seems " High Performance and per Packet Latency Tradeoff" is missed.

> 
>  #
>  # Compile burst-oriented FM10K PMD
> diff --git a/drivers/net/i40e/i40e_ethdev.c b/drivers/net/i40e/i40e_ethdev.c
> index 13c5d3296..c8f9566e0 100644
> --- a/drivers/net/i40e/i40e_ethdev.c
> +++ b/drivers/net/i40e/i40e_ethdev.c
> @@ -1829,8 +1829,7 @@ __vsi_queues_bind_intr(struct i40e_vsi *vsi,
> uint16_t msix_vect,
>  	/* Write first RX queue to Link list register as the head element */
>  	if (vsi->type != I40E_VSI_SRIOV) {
>  		uint16_t interval =
> -
> 	i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 1,
> -					       pf->support_multi_driver);
> +			i40e_calc_itr_interval(1, pf->support_multi_driver);
> 
>  		if (msix_vect == I40E_MISC_VEC_ID) {
>  			I40E_WRITE_REG(hw, I40E_PFINT_LNKLST0, diff --git
> a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h index
> 11c4c76bd..599993dac 100644
> --- a/drivers/net/i40e/i40e_ethdev.h
> +++ b/drivers/net/i40e/i40e_ethdev.h
> @@ -178,7 +178,7 @@ enum i40e_flxpld_layer_idx {
>  #define I40E_ITR_INDEX_NONE             3
>  #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
>  #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
> -#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 8160 /* 8160 us */
> +#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
>  /* Special FW support this floating VEB feature */  #define
> FLOATING_VEB_SUPPORTED_FW_MAJ 5  #define
> FLOATING_VEB_SUPPORTED_FW_MIN 0 @@ -1328,17 +1328,17 @@
> i40e_align_floor(int n)  }
> 
>  static inline uint16_t
> -i40e_calc_itr_interval(int16_t interval, bool is_pf, bool is_multi_drv)
> +i40e_calc_itr_interval(bool is_pf, bool is_multi_drv)
>  {
> -	if (interval < 0 || interval > I40E_QUEUE_ITR_INTERVAL_MAX) {
> -		if (is_multi_drv) {
> -			interval = I40E_QUEUE_ITR_INTERVAL_MAX;
> -		} else {
> -			if (is_pf)
> -				interval =
> I40E_QUEUE_ITR_INTERVAL_DEFAULT;
> -			else
> -				interval =
> I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
> -		}
> +	uint16_t interval = 0;
> +
> +	if (is_multi_drv) {
> +		interval = I40E_QUEUE_ITR_INTERVAL_MAX;
> +	} else {
> +		if (is_pf)
> +			interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
> +		else
> +			interval = I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
>  	}
> 
>  	/* Convert to hardware count, as writing each 1 represents 2 us */
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index 804e44530..ad5c069e8 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -44,6 +44,8 @@
>  #define I40EVF_BUSY_WAIT_COUNT 50
>  #define MAX_RESET_WAIT_CNT     20
> 
> +#define I40EVF_ALARM_INTERVAL 50000 /* us */
> +
>  struct i40evf_arq_msg_info {
>  	enum virtchnl_ops ops;
>  	enum i40e_status_code result;
> @@ -1133,7 +1135,7 @@ i40evf_init_vf(struct rte_eth_dev *dev)
>  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> >dev_private);
>  	uint16_t interval =
> -		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
> +		i40e_calc_itr_interval(0, 0);
> 
>  	vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data-
> >dev_private);
>  	vf->dev_data = dev->data;
> @@ -1370,7 +1372,7 @@ i40evf_handle_aq_msg(struct rte_eth_dev *dev)
>   *  void
>   */
>  static void
> -i40evf_dev_interrupt_handler(void *param)
> +i40evf_dev_alarm_handler(void *param)
>  {
>  	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
>  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> @@ -1399,6 +1401,8 @@ i40evf_dev_interrupt_handler(void *param)
> 
>  done:
>  	i40evf_enable_irq0(hw);
> +	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> +			  i40evf_dev_alarm_handler, dev);
>  }
> 
>  static int
> @@ -1442,12 +1446,8 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
>  		return -1;
>  	}
> 
> -	/* register callback func to eal lib */
> -	rte_intr_callback_register(&pci_dev->intr_handle,
> -		i40evf_dev_interrupt_handler, (void *)eth_dev);
> -
> -	/* enable uio intr after callback register */
> -	rte_intr_enable(&pci_dev->intr_handle);
> +	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> +			  i40evf_dev_alarm_handler, eth_dev);
> 
>  	/* configure and enable device interrupt */
>  	i40evf_enable_irq0(hw);
> @@ -1836,7 +1836,7 @@ i40evf_dev_rx_queue_intr_enable(struct
> rte_eth_dev *dev, uint16_t queue_id)
>  	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
>  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
>  	uint16_t interval =
> -		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
> +		i40e_calc_itr_interval(0, 0);
>  	uint16_t msix_intr;
> 
>  	msix_intr = intr_handle->intr_vec[queue_id]; @@ -1859,8 +1859,6
> @@ i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t
> queue_id)
> 
>  	I40EVF_WRITE_FLUSH(hw);
> 
> -	rte_intr_enable(&pci_dev->intr_handle);
> -
>  	return 0;
>  }
> 
> @@ -2023,10 +2021,8 @@ i40evf_dev_start(struct rte_eth_dev *dev)
>  	 * queue interrupt to other VFIO vectors.
>  	 * So clear uio/vfio intr/evevnfd first to avoid failure.
>  	 */
> -	if (dev->data->dev_conf.intr_conf.rxq != 0) {
> -		rte_intr_disable(intr_handle);

Do we need to delete "rte_intr_disable" here? If so, should the comments be changed?

> +	if (dev->data->dev_conf.intr_conf.rxq != 0)
>  		rte_intr_enable(intr_handle);
> -	}
> 
>  	i40evf_enable_queues_intr(dev);
> 
> @@ -2050,6 +2046,9 @@ i40evf_dev_stop(struct rte_eth_dev *dev)
> 
>  	PMD_INIT_FUNC_TRACE();
> 
> +	if (dev->data->dev_conf.intr_conf.rxq != 0)
> +		rte_intr_disable(intr_handle);
> +
>  	if (hw->adapter_stopped == 1)
>  		return;
>  	i40evf_stop_queues(dev);
> @@ -2285,9 +2284,8 @@ static void
>  i40evf_dev_close(struct rte_eth_dev *dev)  {
>  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> >dev_private);
> -	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> -	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> 
> +	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
>  	i40evf_dev_stop(dev);
>  	i40e_dev_free_queues(dev);
>  	/*
> @@ -2300,12 +2298,6 @@ i40evf_dev_close(struct rte_eth_dev *dev)
> 
>  	i40evf_reset_vf(hw);
>  	i40e_shutdown_adminq(hw);
> -	/* disable uio intr before callback unregister */
> -	rte_intr_disable(intr_handle);
> -
> -	/* unregister callback func from eal lib */
> -	rte_intr_callback_unregister(intr_handle,
> -				     i40evf_dev_interrupt_handler, dev);
>  	i40evf_disable_irq0(hw);
>  }
> 
> --
> 2.13.6

^ permalink raw reply	[flat|nested] 5+ messages in thread

* Re: [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler
  2018-06-27  3:48 ` Xing, Beilei
@ 2018-06-27  3:59   ` Zhang, Qi Z
  0 siblings, 0 replies; 5+ messages in thread
From: Zhang, Qi Z @ 2018-06-27  3:59 UTC (permalink / raw)
  To: Xing, Beilei; +Cc: Wu, Jingjing, Yu, De, dev



> -----Original Message-----
> From: Xing, Beilei
> Sent: Wednesday, June 27, 2018 11:48 AM
> To: Zhang, Qi Z <qi.z.zhang@intel.com>
> Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> dev@dpdk.org
> Subject: RE: [PATCH] net/i40e: remove VF interrupt handler
> 
> 
> 
> > -----Original Message-----
> > From: Zhang, Qi Z
> > Sent: Thursday, June 7, 2018 9:32 AM
> > To: Xing, Beilei <beilei.xing@intel.com>
> > Cc: Wu, Jingjing <jingjing.wu@intel.com>; Yu, De <de.yu@intel.com>;
> > dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> > Subject: [PATCH] net/i40e: remove VF interrupt handler
> >
> > For i40evf, internal rx interrupt and adminq interrupt share the same
> > source, that cause a lot cpu cycles be wasted on interrupt handler on
> > rx path. This is complained by customers which require low latency
> > (when set I40E_ITR_INTERVAL to small value), but have to be sufferred
> > by tremendous interrupts handling that eat significant CPU resources.
> >
> > The patch disable pci interrupt and remove the interrupt handler,
> > replace it with a low frequency (50ms) interrupt polling daemon which
> > is implemented by registering a alarm callback periodly, this save CPU
> > time significently: On a typical x86 server with 2.1GHz CPU, with low
> > latency configure (32us) we saw CPU usage from top commmand reduced
> > from 20% to 0% on management core in testpmd).
> >
> > Also with the new method we can remove compile option:
> > I40E_ITR_INTERVAL which is used to balance between low latency and low
> > CPU usage previously.
> > Now we don't need it since we can reach both at same time.
> >
> > Suggested-by: Jingjing Wu <jingjing.wu@intel.com>
> > Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>
> > ---
> >  config/common_base                |  2 --
> >  drivers/net/i40e/i40e_ethdev.c    |  3 +--
> >  drivers/net/i40e/i40e_ethdev.h    | 22 +++++++++++-----------
> >  drivers/net/i40e/i40e_ethdev_vf.c | 36
> > ++++++++++++++----------------------
> >  4 files changed, 26 insertions(+), 37 deletions(-)
> >
> > diff --git a/config/common_base b/config/common_base index
> > 6b0d1cbbb..9e21c6865 100644
> > --- a/config/common_base
> > +++ b/config/common_base
> > @@ -264,8 +264,6 @@ CONFIG_RTE_LIBRTE_I40E_INC_VECTOR=y
> >  CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
> >  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_PF=64
> >  CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
> > -# interval up to 8160 us, aligned to 2 (or default value)
> > -CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
> 
> Seems " High Performance and per Packet Latency Tradeoff" is missed.

Ok, that should be removed also, thanks!
> 
> >
> >  #
> >  # Compile burst-oriented FM10K PMD
> > diff --git a/drivers/net/i40e/i40e_ethdev.c
> > b/drivers/net/i40e/i40e_ethdev.c index 13c5d3296..c8f9566e0 100644
> > --- a/drivers/net/i40e/i40e_ethdev.c
> > +++ b/drivers/net/i40e/i40e_ethdev.c
> > @@ -1829,8 +1829,7 @@ __vsi_queues_bind_intr(struct i40e_vsi *vsi,
> > uint16_t msix_vect,
> >  	/* Write first RX queue to Link list register as the head element */
> >  	if (vsi->type != I40E_VSI_SRIOV) {
> >  		uint16_t interval =
> > -
> > 	i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 1,
> > -					       pf->support_multi_driver);
> > +			i40e_calc_itr_interval(1, pf->support_multi_driver);
> >
> >  		if (msix_vect == I40E_MISC_VEC_ID) {
> >  			I40E_WRITE_REG(hw, I40E_PFINT_LNKLST0, diff --git
> > a/drivers/net/i40e/i40e_ethdev.h b/drivers/net/i40e/i40e_ethdev.h
> > index 11c4c76bd..599993dac 100644
> > --- a/drivers/net/i40e/i40e_ethdev.h
> > +++ b/drivers/net/i40e/i40e_ethdev.h
> > @@ -178,7 +178,7 @@ enum i40e_flxpld_layer_idx {
> >  #define I40E_ITR_INDEX_NONE             3
> >  #define I40E_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
> >  #define I40E_QUEUE_ITR_INTERVAL_MAX     8160 /* 8160 us */
> > -#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 8160 /* 8160 us */
> > +#define I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT 32 /* 32 us */
> >  /* Special FW support this floating VEB feature */  #define
> > FLOATING_VEB_SUPPORTED_FW_MAJ 5  #define
> FLOATING_VEB_SUPPORTED_FW_MIN
> > 0 @@ -1328,17 +1328,17 @@ i40e_align_floor(int n)  }
> >
> >  static inline uint16_t
> > -i40e_calc_itr_interval(int16_t interval, bool is_pf, bool
> > is_multi_drv)
> > +i40e_calc_itr_interval(bool is_pf, bool is_multi_drv)
> >  {
> > -	if (interval < 0 || interval > I40E_QUEUE_ITR_INTERVAL_MAX) {
> > -		if (is_multi_drv) {
> > -			interval = I40E_QUEUE_ITR_INTERVAL_MAX;
> > -		} else {
> > -			if (is_pf)
> > -				interval =
> > I40E_QUEUE_ITR_INTERVAL_DEFAULT;
> > -			else
> > -				interval =
> > I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
> > -		}
> > +	uint16_t interval = 0;
> > +
> > +	if (is_multi_drv) {
> > +		interval = I40E_QUEUE_ITR_INTERVAL_MAX;
> > +	} else {
> > +		if (is_pf)
> > +			interval = I40E_QUEUE_ITR_INTERVAL_DEFAULT;
> > +		else
> > +			interval = I40E_VF_QUEUE_ITR_INTERVAL_DEFAULT;
> >  	}
> >
> >  	/* Convert to hardware count, as writing each 1 represents 2 us */
> > diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> > b/drivers/net/i40e/i40e_ethdev_vf.c
> > index 804e44530..ad5c069e8 100644
> > --- a/drivers/net/i40e/i40e_ethdev_vf.c
> > +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> > @@ -44,6 +44,8 @@
> >  #define I40EVF_BUSY_WAIT_COUNT 50
> >  #define MAX_RESET_WAIT_CNT     20
> >
> > +#define I40EVF_ALARM_INTERVAL 50000 /* us */
> > +
> >  struct i40evf_arq_msg_info {
> >  	enum virtchnl_ops ops;
> >  	enum i40e_status_code result;
> > @@ -1133,7 +1135,7 @@ i40evf_init_vf(struct rte_eth_dev *dev)
> >  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> >  	struct i40e_vf *vf = I40EVF_DEV_PRIVATE_TO_VF(dev->data-
> > >dev_private);
> >  	uint16_t interval =
> > -		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
> > +		i40e_calc_itr_interval(0, 0);
> >
> >  	vf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data-
> > >dev_private);
> >  	vf->dev_data = dev->data;
> > @@ -1370,7 +1372,7 @@ i40evf_handle_aq_msg(struct rte_eth_dev *dev)
> >   *  void
> >   */
> >  static void
> > -i40evf_dev_interrupt_handler(void *param)
> > +i40evf_dev_alarm_handler(void *param)
> >  {
> >  	struct rte_eth_dev *dev = (struct rte_eth_dev *)param;
> >  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > @@ -1399,6 +1401,8 @@ i40evf_dev_interrupt_handler(void *param)
> >
> >  done:
> >  	i40evf_enable_irq0(hw);
> > +	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> > +			  i40evf_dev_alarm_handler, dev);
> >  }
> >
> >  static int
> > @@ -1442,12 +1446,8 @@ i40evf_dev_init(struct rte_eth_dev *eth_dev)
> >  		return -1;
> >  	}
> >
> > -	/* register callback func to eal lib */
> > -	rte_intr_callback_register(&pci_dev->intr_handle,
> > -		i40evf_dev_interrupt_handler, (void *)eth_dev);
> > -
> > -	/* enable uio intr after callback register */
> > -	rte_intr_enable(&pci_dev->intr_handle);
> > +	rte_eal_alarm_set(I40EVF_ALARM_INTERVAL,
> > +			  i40evf_dev_alarm_handler, eth_dev);
> >
> >  	/* configure and enable device interrupt */
> >  	i40evf_enable_irq0(hw);
> > @@ -1836,7 +1836,7 @@ i40evf_dev_rx_queue_intr_enable(struct
> > rte_eth_dev *dev, uint16_t queue_id)
> >  	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> >  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> >  	uint16_t interval =
> > -		i40e_calc_itr_interval(RTE_LIBRTE_I40E_ITR_INTERVAL, 0, 0);
> > +		i40e_calc_itr_interval(0, 0);
> >  	uint16_t msix_intr;
> >
> >  	msix_intr = intr_handle->intr_vec[queue_id]; @@ -1859,8 +1859,6 @@
> > i40evf_dev_rx_queue_intr_enable(struct rte_eth_dev *dev, uint16_t
> > queue_id)
> >
> >  	I40EVF_WRITE_FLUSH(hw);
> >
> > -	rte_intr_enable(&pci_dev->intr_handle);
> > -
> >  	return 0;
> >  }
> >
> > @@ -2023,10 +2021,8 @@ i40evf_dev_start(struct rte_eth_dev *dev)
> >  	 * queue interrupt to other VFIO vectors.
> >  	 * So clear uio/vfio intr/evevnfd first to avoid failure.
> >  	 */
> > -	if (dev->data->dev_conf.intr_conf.rxq != 0) {
> > -		rte_intr_disable(intr_handle);
> 
> Do we need to delete "rte_intr_disable" here? If so, should the comments be
> changed?

The reason we have rte_intr_disable here is there is an rte_intr_enable in i40evf_dev_init which may cause problem as the comment above this code section.

		/* When a VF port is bound to VFIO-PCI, only miscellaneous interrupt
         * is mapped to VFIO vector 0 in i40evf_dev_init( ).
         * If previous VFIO interrupt mapping set in i40evf_dev_init( ) is
         * not cleared, it will fail when rte_intr_enable( ) tries to map Rx
         * queue interrupt to other VFIO vectors.
         * So clear uio/vfio intr/evevnfd first to avoid failure.
         */
Now, rte_intr_enable has been removed in i40evf_dev_init, so rte_intr_disable can be removed also, but seems I need to remove the comment also.

Thanks
Qi

> 
> > +	if (dev->data->dev_conf.intr_conf.rxq != 0)
> >  		rte_intr_enable(intr_handle);
> > -	}
> >
> >  	i40evf_enable_queues_intr(dev);
> >
> > @@ -2050,6 +2046,9 @@ i40evf_dev_stop(struct rte_eth_dev *dev)
> >
> >  	PMD_INIT_FUNC_TRACE();
> >
> > +	if (dev->data->dev_conf.intr_conf.rxq != 0)
> > +		rte_intr_disable(intr_handle);
> > +
> >  	if (hw->adapter_stopped == 1)
> >  		return;
> >  	i40evf_stop_queues(dev);
> > @@ -2285,9 +2284,8 @@ static void
> >  i40evf_dev_close(struct rte_eth_dev *dev)  {
> >  	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data-
> > >dev_private);
> > -	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(dev);
> > -	struct rte_intr_handle *intr_handle = &pci_dev->intr_handle;
> >
> > +	rte_eal_alarm_cancel(i40evf_dev_alarm_handler, dev);
> >  	i40evf_dev_stop(dev);
> >  	i40e_dev_free_queues(dev);
> >  	/*
> > @@ -2300,12 +2298,6 @@ i40evf_dev_close(struct rte_eth_dev *dev)
> >
> >  	i40evf_reset_vf(hw);
> >  	i40e_shutdown_adminq(hw);
> > -	/* disable uio intr before callback unregister */
> > -	rte_intr_disable(intr_handle);
> > -
> > -	/* unregister callback func from eal lib */
> > -	rte_intr_callback_unregister(intr_handle,
> > -				     i40evf_dev_interrupt_handler, dev);
> >  	i40evf_disable_irq0(hw);
> >  }
> >
> > --
> > 2.13.6

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2018-06-27  3:59 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-06-07  1:31 [dpdk-dev] [PATCH] net/i40e: remove VF interrupt handler Qi Zhang
2018-06-07  7:14 ` Xing, Beilei
2018-06-07 13:16   ` Zhang, Qi Z
2018-06-27  3:48 ` Xing, Beilei
2018-06-27  3:59   ` Zhang, Qi Z

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).