From: "Zhang, Qi Z" <qi.z.zhang@intel.com>
To: "Yan, Zhirun" <zhirun.yan@intel.com>, "dev@dpdk.org" <dev@dpdk.org>
Cc: "Wang, Haiyue" <haiyue.wang@intel.com>
Subject: Re: [dpdk-dev] [PATCH v6 1/3] net/i40e: support VF request more queues
Date: Tue, 18 Dec 2018 12:44:18 +0000 [thread overview]
Message-ID: <039ED4275CED7440929022BC67E706115330204F@SHSMSX103.ccr.corp.intel.com> (raw)
In-Reply-To: <20181218160933.11113-2-zhirun.yan@intel.com>
> -----Original Message-----
> From: Yan, Zhirun
> Sent: Wednesday, December 19, 2018 12:10 AM
> To: dev@dpdk.org; Zhang, Qi Z <qi.z.zhang@intel.com>
> Cc: Yan, Zhirun <zhirun.yan@intel.com>; Wang, Haiyue <haiyue.wang@intel.com>
> Subject: [PATCH v6 1/3] net/i40e: support VF request more queues
>
> Before this patch, VF gets a default number of queues from the PF.
> This patch enables VF to request a different number. When VF configures more
> queues, it will send VIRTCHNL_OP_REQUEST_QUEUES to PF to request more
> queues, if success, PF will reset the VF.
>
> User can run "port stop all", "port config port_id rxq/txq queue_num"
> and "port start all" to reconfigure queue number.
>
> Signed-off-by: Zhirun Yan <zhirun.yan@intel.com>
> Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
> ---
> drivers/net/i40e/i40e_ethdev_vf.c | 62 ++++++++++++++++++++++++++++++-
> 1 file changed, 60 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/i40e/i40e_ethdev_vf.c
> b/drivers/net/i40e/i40e_ethdev_vf.c
> index 05dc6596b..498e86649 100644
> --- a/drivers/net/i40e/i40e_ethdev_vf.c
> +++ b/drivers/net/i40e/i40e_ethdev_vf.c
> @@ -359,6 +359,25 @@ i40evf_execute_vf_cmd(struct rte_eth_dev *dev, struct
> vf_cmd_info *args)
> } while (i++ < MAX_TRY_TIMES);
> _clear_cmd(vf);
> break;
> + case VIRTCHNL_OP_REQUEST_QUEUES:
> + /*ignore async reply, only wait for system message,*/
> + /*vf_reset = true if get VIRTCHNL_EVENT_RESET_IMPENDING,*/
> + /*if not, means request queues failed */
I think you forgot to fix the comment format as Ferruh mentioned previously
> + err = -1;
> + do {
> + ret = i40evf_read_pfmsg(dev, &info);
> + vf->cmd_retval = info.result;
> + if (ret == I40EVF_MSG_SYS && vf->vf_reset) {
> + err = 0;
> + break;
> + } else if (ret == I40EVF_MSG_ERR || ret == I40EVF_MSG_CMD) {
> + break;
> + }
> + rte_delay_ms(ASQ_DELAY_MS);
> + /* If don't read msg or read sys event, continue */
> + } while (i++ < MAX_TRY_TIMES);
> + _clear_cmd(vf);
> + break;
>
> default:
> /* for other adminq in running time, waiting the cmd done flag */ @@
> -1012,6 +1031,28 @@ i40evf_add_vlan(struct rte_eth_dev *dev, uint16_t vlanid)
> return err;
> }
>
> +static int
> +i40evf_request_queues(struct rte_eth_dev *dev, uint16_t num) {
> + struct i40e_vf *vf =
> I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
> + struct virtchnl_vf_res_request vfres;
> + struct vf_cmd_info args;
> + int err;
> +
> + vfres.num_queue_pairs = num;
> +
> + args.ops = VIRTCHNL_OP_REQUEST_QUEUES;
> + args.in_args = (u8 *)&vfres;
> + args.in_args_size = sizeof(vfres);
> + args.out_buffer = vf->aq_resp;
> + args.out_size = I40E_AQ_BUF_SZ;
> + err = i40evf_execute_vf_cmd(dev, &args);
> + if (err)
> + PMD_DRV_LOG(ERR, "fail to execute command
> OP_REQUEST_QUEUES");
> +
> + return err;
> +}
> +
> static int
> i40evf_del_vlan(struct rte_eth_dev *dev, uint16_t vlanid) { @@ -1516,8
> +1557,11 @@ RTE_PMD_REGISTER_KMOD_DEP(net_i40e_vf, "* igb_uio |
> vfio-pci"); static int i40evf_dev_configure(struct rte_eth_dev *dev) {
> + struct i40e_vf *vf =
> I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
> struct i40e_adapter *ad =
> I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
> + uint16_t num_queue_pairs = RTE_MAX(dev->data->nb_rx_queues,
> + dev->data->nb_tx_queues);
>
> /* Initialize to TRUE. If any of Rx queues doesn't meet the bulk
> * allocation or vector Rx preconditions we will reset it.
> @@ -1527,6 +1571,20 @@ i40evf_dev_configure(struct rte_eth_dev *dev)
> ad->tx_simple_allowed = true;
> ad->tx_vec_allowed = true;
>
> + if (num_queue_pairs > vf->vsi_res->num_queue_pairs) {
> + int ret = 0;
> +
> + PMD_DRV_LOG(INFO, "change queue pairs from %u to %u",
> + vf->vsi_res->num_queue_pairs, num_queue_pairs);
> + ret = i40evf_request_queues(dev, num_queue_pairs);
> + if (ret != 0)
> + return ret;
> +
> + ret = i40evf_dev_reset(dev);
> + if (ret != 0)
> + return ret;
> + }
> +
> return i40evf_init_vlan(dev);
> }
>
> @@ -2145,8 +2203,8 @@ i40evf_dev_info_get(struct rte_eth_dev *dev, struct
> rte_eth_dev_info *dev_info) {
> struct i40e_vf *vf =
> I40EVF_DEV_PRIVATE_TO_VF(dev->data->dev_private);
>
> - dev_info->max_rx_queues = vf->vsi_res->num_queue_pairs;
> - dev_info->max_tx_queues = vf->vsi_res->num_queue_pairs;
> + dev_info->max_rx_queues = I40E_MAX_QP_NUM_PER_VF;
> + dev_info->max_tx_queues = I40E_MAX_QP_NUM_PER_VF;
> dev_info->min_rx_bufsize = I40E_BUF_SIZE_MIN;
> dev_info->max_rx_pktlen = I40E_FRAME_SIZE_MAX;
> dev_info->hash_key_size = (I40E_VFQF_HKEY_MAX_INDEX + 1) *
> sizeof(uint32_t);
> --
> 2.17.1
next prev parent reply other threads:[~2018-12-18 12:44 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-28 16:58 [dpdk-dev] [PATCH v2 0/2] Support " Zhirun Yan
2018-11-28 16:58 ` [dpdk-dev] [PATCH v2 1/2] net/i40e: support VF " Zhirun Yan
2018-11-28 16:58 ` [dpdk-dev] [PATCH v2 2/2] net/i40e: support PF respond " Zhirun Yan
2018-12-13 14:05 ` [dpdk-dev] [PATCH v3 0/2] Support " Zhirun Yan
2018-12-13 14:05 ` [dpdk-dev] [PATCH v3 1/2] net/i40e: support VF " Zhirun Yan
2018-12-13 8:26 ` David Marchand
2018-12-14 3:17 ` Yan, Zhirun
2018-12-13 10:49 ` Zhang, Qi Z
2018-12-14 3:22 ` Yan, Zhirun
2018-12-13 14:05 ` [dpdk-dev] [PATCH v3 2/2] net/i40e: support PF respond " Zhirun Yan
2018-12-14 14:37 ` [dpdk-dev] [PATCH v4 0/2] Support " Zhirun Yan
2018-12-14 14:37 ` [dpdk-dev] [PATCH v4 1/2] net/i40e: support VF " Zhirun Yan
2018-12-14 11:59 ` Zhang, Qi Z
2018-12-17 3:12 ` Yan, Zhirun
2018-12-14 14:37 ` [dpdk-dev] [PATCH v4 2/2] net/i40e: support PF respond " Zhirun Yan
2018-12-17 11:10 ` [dpdk-dev] [PATCH v5 0/2] Support " Zhirun Yan
2018-12-17 5:31 ` Zhang, Qi Z
2018-12-17 11:10 ` [dpdk-dev] [PATCH v5 1/2] net/i40e: support VF " Zhirun Yan
2018-12-17 14:28 ` Ferruh Yigit
2018-12-18 1:44 ` Zhang, Qi Z
2018-12-17 14:31 ` Ferruh Yigit
2018-12-17 11:10 ` [dpdk-dev] [PATCH v5 2/2] net/i40e: support PF respond " Zhirun Yan
2018-12-17 14:26 ` Ferruh Yigit
2018-12-18 16:09 ` [dpdk-dev] [PATCH v6 0/3] Support " Zhirun Yan
2018-12-18 16:09 ` [dpdk-dev] [PATCH v6 1/3] net/i40e: support VF " Zhirun Yan
2018-12-18 12:44 ` Zhang, Qi Z [this message]
2018-12-19 1:34 ` Yan, Zhirun
2018-12-18 16:09 ` [dpdk-dev] [PATCH v6 2/3] net/i40e: support PF respond " Zhirun Yan
2018-12-18 16:09 ` [dpdk-dev] [PATCH v6 3/3] doc: update queue number per vf for i40e Zhirun Yan
2018-12-18 12:59 ` Zhang, Qi Z
2018-12-19 1:33 ` Yan, Zhirun
2018-12-19 13:08 ` [dpdk-dev] [PATCH v7 0/3] Support request more queues Zhirun Yan
2018-12-19 13:08 ` [dpdk-dev] [PATCH v7 1/3] net/i40e: support VF " Zhirun Yan
2018-12-19 13:08 ` [dpdk-dev] [PATCH v7 2/3] net/i40e: support PF respond " Zhirun Yan
2018-12-19 13:08 ` [dpdk-dev] [PATCH v7 3/3] doc: update queue number per vf for i40e Zhirun Yan
2018-12-19 13:37 ` [dpdk-dev] [PATCH v8 0/3] Support request more queues Zhirun Yan
2018-12-19 13:37 ` [dpdk-dev] [PATCH v8 1/3] net/i40e: support VF " Zhirun Yan
2018-12-19 13:37 ` [dpdk-dev] [PATCH v8 2/3] net/i40e: support PF respond " Zhirun Yan
2018-12-19 13:37 ` [dpdk-dev] [PATCH v8 3/3] doc: update queue number per vf for i40e Zhirun Yan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=039ED4275CED7440929022BC67E706115330204F@SHSMSX103.ccr.corp.intel.com \
--to=qi.z.zhang@intel.com \
--cc=dev@dpdk.org \
--cc=haiyue.wang@intel.com \
--cc=zhirun.yan@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).