* [dpdk-dev] [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was vectorized @ 2019-05-23 17:57 Mesut Ali Ergin 2019-05-24 2:48 ` Zhang, Qi Z 0 siblings, 1 reply; 3+ messages in thread From: Mesut Ali Ergin @ 2019-05-23 17:57 UTC (permalink / raw) To: Beilei Xing, Qi Zhang; +Cc: dev, Mesut Ali Ergin Runtime requests to install an rte_flow with MARK action should fail if a vector RX function was already chosen for the device during configuration time. Currently, i40e rte_flow driver would successfully install the flow with MARK action, even when vector RX functions are in use. However, those vector RX functions will fail to retrieve the MARK data from the device descriptor into the mbuf. The original app installing the flow would never know what went wrong. The change introduced in this patch must be reverted if/when vector RX functions start supporting correct FDIR processing for MARK actions. Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com> --- drivers/net/i40e/i40e_flow.c | 21 +++++++++++++++++++++ 1 file changed, 21 insertions(+) diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c index 3afd779..9a14a1c 100644 --- a/drivers/net/i40e/i40e_flow.c +++ b/drivers/net/i40e/i40e_flow.c @@ -22,6 +22,7 @@ #include "base/i40e_type.h" #include "base/i40e_prototype.h" #include "i40e_ethdev.h" +#include "i40e_rxtx.h" #define I40E_IPV6_TC_MASK (0xFF << I40E_FDIR_IPv6_TC_OFFSET) #define I40E_IPV6_FRAG_HEADER 44 @@ -3079,6 +3080,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev *dev, filter->action.behavior = I40E_FDIR_PASSTHRU; break; case RTE_FLOW_ACTION_TYPE_MARK: + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || + dev->rx_pkt_burst == i40e_recv_pkts_vec || + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { + /* Vector RX Functions do not support MARK*/ + rte_flow_error_set(error, EINVAL, + RTE_FLOW_ERROR_TYPE_ACTION, act, + "Action not supported when vector RX is in use."); + return -rte_errno; + } filter->action.behavior = I40E_FDIR_PASSTHRU; mark_spec = act->conf; filter->action.report_status = I40E_FDIR_REPORT_ID; @@ -3103,6 +3114,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev *dev, "Invalid action."); return -rte_errno; } + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || + dev->rx_pkt_burst == i40e_recv_pkts_vec || + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { + /* Vector RX Functions do not support MARK*/ + rte_flow_error_set(error, EINVAL, + RTE_FLOW_ERROR_TYPE_ACTION, act, + "Action not supported when vector RX is in use."); + return -rte_errno; + } mark_spec = act->conf; filter->action.report_status = I40E_FDIR_REPORT_ID; filter->soft_id = mark_spec->id; -- 2.7.4 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was vectorized 2019-05-23 17:57 [dpdk-dev] [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was vectorized Mesut Ali Ergin @ 2019-05-24 2:48 ` Zhang, Qi Z 2019-05-24 22:47 ` Ergin, Mesut A 0 siblings, 1 reply; 3+ messages in thread From: Zhang, Qi Z @ 2019-05-24 2:48 UTC (permalink / raw) To: Ergin, Mesut A, Xing, Beilei; +Cc: dev Hi Mesut: > -----Original Message----- > From: Ergin, Mesut A > Sent: Friday, May 24, 2019 1:57 AM > To: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com> > Cc: dev@dpdk.org; Ergin, Mesut A <mesut.a.ergin@intel.com> > Subject: [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was > vectorized > > Runtime requests to install an rte_flow with MARK action should fail if a vector > RX function was already chosen for the device during configuration time. > > Currently, i40e rte_flow driver would successfully install the flow with MARK > action, even when vector RX functions are in use. However, those vector RX > functions will fail to retrieve the MARK data from the device descriptor into > the mbuf. The original app installing the flow would never know what went > wrong. The change introduced in this patch must be reverted if/when vector > RX functions start supporting correct FDIR processing for MARK actions. > > Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com> > --- > drivers/net/i40e/i40e_flow.c | 21 +++++++++++++++++++++ > 1 file changed, 21 insertions(+) > > diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c index > 3afd779..9a14a1c 100644 > --- a/drivers/net/i40e/i40e_flow.c > +++ b/drivers/net/i40e/i40e_flow.c > @@ -22,6 +22,7 @@ > #include "base/i40e_type.h" > #include "base/i40e_prototype.h" > #include "i40e_ethdev.h" > +#include "i40e_rxtx.h" > > #define I40E_IPV6_TC_MASK (0xFF << I40E_FDIR_IPv6_TC_OFFSET) > #define I40E_IPV6_FRAG_HEADER 44 > @@ -3079,6 +3080,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev > *dev, > filter->action.behavior = I40E_FDIR_PASSTHRU; > break; > case RTE_FLOW_ACTION_TYPE_MARK: > + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || > + dev->rx_pkt_burst == i40e_recv_pkts_vec || > + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || > + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { > + /* Vector RX Functions do not support MARK*/ > + rte_flow_error_set(error, EINVAL, > + RTE_FLOW_ERROR_TYPE_ACTION, act, > + "Action not supported when vector RX is in use."); > + return -rte_errno; > + } We may not need to prevent this if the device is already stopped (check dev->data->dev_started), since with the fdir flow be created here, vector path will not be selected in following dev_start. > filter->action.behavior = I40E_FDIR_PASSTHRU; > mark_spec = act->conf; > filter->action.report_status = I40E_FDIR_REPORT_ID; @@ -3103,6 > +3114,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev *dev, > "Invalid action."); > return -rte_errno; > } > + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || > + dev->rx_pkt_burst == i40e_recv_pkts_vec || > + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || > + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { > + /* Vector RX Functions do not support MARK*/ > + rte_flow_error_set(error, EINVAL, > + RTE_FLOW_ERROR_TYPE_ACTION, act, > + "Action not supported when vector RX is in use."); > + return -rte_errno; > + } > mark_spec = act->conf; > filter->action.report_status = I40E_FDIR_REPORT_ID; > filter->soft_id = mark_spec->id; > -- > 2.7.4 ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: [dpdk-dev] [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was vectorized 2019-05-24 2:48 ` Zhang, Qi Z @ 2019-05-24 22:47 ` Ergin, Mesut A 0 siblings, 0 replies; 3+ messages in thread From: Ergin, Mesut A @ 2019-05-24 22:47 UTC (permalink / raw) To: Zhang, Qi Z, Xing, Beilei; +Cc: dev Hi Qi, > -----Original Message----- > From: Zhang, Qi Z > Sent: Thursday, May 23, 2019 7:49 PM > To: Ergin, Mesut A <mesut.a.ergin@intel.com>; Xing, Beilei > <beilei.xing@intel.com> > Cc: dev@dpdk.org > Subject: RE: [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was > vectorized > > Hi Mesut: > > > -----Original Message----- > > From: Ergin, Mesut A > > Sent: Friday, May 24, 2019 1:57 AM > > To: Xing, Beilei <beilei.xing@intel.com>; Zhang, Qi Z <qi.z.zhang@intel.com> > > Cc: dev@dpdk.org; Ergin, Mesut A <mesut.a.ergin@intel.com> > > Subject: [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was > > vectorized > > > > Runtime requests to install an rte_flow with MARK action should fail if a vector > > RX function was already chosen for the device during configuration time. > > > > Currently, i40e rte_flow driver would successfully install the flow with MARK > > action, even when vector RX functions are in use. However, those vector RX > > functions will fail to retrieve the MARK data from the device descriptor into > > the mbuf. The original app installing the flow would never know what went > > wrong. The change introduced in this patch must be reverted if/when vector > > RX functions start supporting correct FDIR processing for MARK actions. > > > > Signed-off-by: Mesut Ali Ergin <mesut.a.ergin@intel.com> > > --- > > drivers/net/i40e/i40e_flow.c | 21 +++++++++++++++++++++ > > 1 file changed, 21 insertions(+) > > > > diff --git a/drivers/net/i40e/i40e_flow.c b/drivers/net/i40e/i40e_flow.c index > > 3afd779..9a14a1c 100644 > > --- a/drivers/net/i40e/i40e_flow.c > > +++ b/drivers/net/i40e/i40e_flow.c > > @@ -22,6 +22,7 @@ > > #include "base/i40e_type.h" > > #include "base/i40e_prototype.h" > > #include "i40e_ethdev.h" > > +#include "i40e_rxtx.h" > > > > #define I40E_IPV6_TC_MASK (0xFF << I40E_FDIR_IPv6_TC_OFFSET) > > #define I40E_IPV6_FRAG_HEADER 44 > > @@ -3079,6 +3080,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev > > *dev, > > filter->action.behavior = I40E_FDIR_PASSTHRU; > > break; > > case RTE_FLOW_ACTION_TYPE_MARK: > > + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || > > + dev->rx_pkt_burst == i40e_recv_pkts_vec || > > + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || > > + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { > > + /* Vector RX Functions do not support MARK*/ > > + rte_flow_error_set(error, EINVAL, > > + RTE_FLOW_ERROR_TYPE_ACTION, > act, > > + "Action not supported when vector > RX is in use."); > > + return -rte_errno; > > + } > > We may not need to prevent this if the device is already stopped (check dev- > >data->dev_started), > since with the fdir flow be created here, vector path will not be selected in > following dev_start. Makes sense, sending a v2 in a bit. > > > filter->action.behavior = I40E_FDIR_PASSTHRU; > > mark_spec = act->conf; > > filter->action.report_status = I40E_FDIR_REPORT_ID; @@ - > 3103,6 > > +3114,16 @@ i40e_flow_parse_fdir_action(struct rte_eth_dev *dev, > > "Invalid action."); > > return -rte_errno; > > } > > + if (dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec || > > + dev->rx_pkt_burst == i40e_recv_pkts_vec || > > + dev->rx_pkt_burst == i40e_recv_scattered_pkts_vec_avx2 || > > + dev->rx_pkt_burst == i40e_recv_pkts_vec_avx2) { > > + /* Vector RX Functions do not support MARK*/ > > + rte_flow_error_set(error, EINVAL, > > + RTE_FLOW_ERROR_TYPE_ACTION, > act, > > + "Action not supported when vector > RX is in use."); > > + return -rte_errno; > > + } > > mark_spec = act->conf; > > filter->action.report_status = I40E_FDIR_REPORT_ID; > > filter->soft_id = mark_spec->id; > > -- > > 2.7.4 ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-05-24 22:47 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-05-23 17:57 [dpdk-dev] [PATCH] net/i40e: Fail rte_flow MARK requests if RX func was vectorized Mesut Ali Ergin 2019-05-24 2:48 ` Zhang, Qi Z 2019-05-24 22:47 ` Ergin, Mesut A
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).