DPDK patches and discussions
 help / color / mirror / Atom feed
* Re: [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function
@ 2019-10-01  7:36 Pavan Nikhilesh Bhagavatula
  2019-10-01  8:02 ` Andrew Rybchenko
  0 siblings, 1 reply; 4+ messages in thread
From: Pavan Nikhilesh Bhagavatula @ 2019-10-01  7:36 UTC (permalink / raw)
  To: Andrew Rybchenko, Jerin Jacob Kollanukkaran, John McNamara,
	Marko Kovacevic, Thomas Monjalon, Ferruh Yigit
  Cc: dev



>-----Original Message-----
>From: Andrew Rybchenko <arybchenko@solarflare.com>
>Sent: Tuesday, October 1, 2019 12:34 PM
>To: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; Jerin
>Jacob Kollanukkaran <jerinj@marvell.com>; John McNamara
><john.mcnamara@intel.com>; Marko Kovacevic
><marko.kovacevic@intel.com>; Thomas Monjalon
><thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>
>Cc: dev@dpdk.org
>Subject: [EXT] Re: [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype
>function
>On 10/1/19 9:34 AM, pbhagavatula@marvell.com wrote:
>> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>>
>> Add `rte_eth_dev_set_supported_ptypes` function that will allow the
>> application to inform the PMD the packet types it is interested in.
>> Based on the ptypes set PMDs can optimize their Rx path.
>>
>> -If application doesn’t want any ptype information it can call
>> `rte_eth_dev_set_supported_ptypes(ethdev_id,
>RTE_PTYPE_UNKNOWN, NULL, 0)`
>> and PMD may skip packet type processing and set
>rte_mbuf::packet_type to
>> RTE_PTYPE_UNKNOWN.
>>
>> -If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD
>can
>> return `rte_mbuf::packet_type` with
>`rte_eth_dev_get_supported_ptypes`.
>>
>> -If application is interested only in L2/L3 layer, it can inform the PMD
>> to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
>> `rte_eth_dev_set_supported_ptypes(ethdev_id,
>> 		RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL,
>0)`.
>>
>> Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
>> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
>
>
>> diff --git a/doc/guides/rel_notes/release_19_11.rst
>b/doc/guides/rel_notes/release_19_11.rst
>> index 27cfbd9e3..7e31b9401 100644
>> --- a/doc/guides/rel_notes/release_19_11.rst
>> +++ b/doc/guides/rel_notes/release_19_11.rst
>> @@ -56,6 +56,13 @@ New Features
>>        Also, make sure to start the actual text at the margin.
>>
>======================================================
>===
>>
>> +* **Added ethdev API to set supported packet types**
>> +
>> +  *  Added new API ``rte_eth_dev_set_supported_ptypes`` that
>allows an
>> +     application to inform PMD about packet types classification the
>application
>> +     is interested in
>> +  *  This scheme will allow PMDs to avoid lookup to internal ptype
>table on Rx
>> +     and thereby improve Rx performance if application wishes do so.
>
>Extra empty line is required here in accordance with documentation
>guidelines.
>

Ack, will fix in v6.

>>   Removed Items
>>   -------------
>> diff --git a/lib/librte_ethdev/rte_ethdev.c
>b/lib/librte_ethdev/rte_ethdev.c
>> index 17d183e1f..061de7ac5 100644
>> --- a/lib/librte_ethdev/rte_ethdev.c
>> +++ b/lib/librte_ethdev/rte_ethdev.c
>> @@ -2602,6 +2602,44 @@
>rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t
>ptype_mask,
>>   	return j;
>>   }
>>
>> +int
>> +rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t
>ptype_mask,
>> +				 uint32_t *set_ptypes, int num)
>
>May be num should be unsigned int?

Ack, unsigned it makes sense.

>
>> +{
>> +	int i, j;
>> +	struct rte_eth_dev *dev;
>> +	const uint32_t *all_ptypes;
>> +
>> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
>> +	dev = &rte_eth_devices[port_id];
>> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
>>dev_supported_ptypes_get, 0);
>> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops-
>>dev_supported_ptypes_set, 0);
>
>if (num > 0 && set_ptypes == NULL)
>     return -EINVAL;
>

Ack, will fix in v6.

>> +
>> +	if (ptype_mask == 0)
>
>if (num > 0)
>      set_ptypes[0] = RTE_PTYPE_UNKNOWN;
>

Ack, will fix in v6.

>> +		return (*dev->dev_ops-
>>dev_supported_ptypes_set)(dev,
>> +				ptype_mask);
>> +
>> +	all_ptypes = (*dev->dev_ops-
>>dev_supported_ptypes_get)(dev);
>> +	if (all_ptypes == NULL)
>
>if (num > 0)
>      set_ptypes[0] = RTE_PTYPE_UNKNOWN;
>

Ack, will fix in v6.

>> +		return 0;
>> +
>> +	for (i = 0, j = 0; set_ptypes && (all_ptypes[i] !=
>RTE_PTYPE_UNKNOWN);
>
>set_ptypes != NULL in accordance with coding guidelines
>
>> +
>	++i) {
>
>Please, consider to put condition check and increment in its own lines.
>IMHO, above it a bit hard to read.
>

Ack, will make it more readable.

>> +		if (ptype_mask & all_ptypes[i]) {
>
>Should it be done if all_ptypes[i] have some bits out of ptype_mask?
>Should set_ptypes have bits out of ptype_mask when set below?
>

Isn't all_ptypes[i] enum?. It makes sense if it's a bit mask. 
Get ptypes has a similar logic. 

>> +			if (j < num - 1) {
>> +				set_ptypes[j] = all_ptypes[i];
>> +				j++;
>> +				continue;
>> +			}
>> +			break;
>
>Do we need an indication if provided set_ptype is not enough
>to return all ptypes? I think it should be explained/highlighted
>in the function description with explanation why.
>
>> +		}
>> +	}
>> +
>> +	set_ptypes[j] = RTE_PTYPE_UNKNOWN;
>
>I think we should allow set_ptypes == NULL if num == 0.
>So, it should be set here if not NULL only.

Ack, will add a check here.

>
>> +
>> +	return (*dev->dev_ops->dev_supported_ptypes_set)(dev,
>ptype_mask);
>> +}
>> +
>>   void
>>   rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr
>*mac_addr)
>>   {
>> diff --git a/lib/librte_ethdev/rte_ethdev.h
>b/lib/librte_ethdev/rte_ethdev.h
>> index d9871782e..6c5fd789a 100644
>> --- a/lib/librte_ethdev/rte_ethdev.h
>> +++ b/lib/librte_ethdev/rte_ethdev.h
>> @@ -2431,6 +2431,35 @@ int rte_eth_dev_fw_version_get(uint16_t
>port_id,
>>    */
>>   int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t
>ptype_mask,
>>   				     uint32_t *ptypes, int num);
>> +/**
>> + * @warning
>> + * @b EXPERIMENTAL: this API may change without prior notice.
>> + *
>> + * Inform Ethernet device of the packet types classification in which
>> + * the recipient is interested.
>> + *
>> + * Application can use this function to set only specific ptypes that it's
>> + * interested. This information can be used by the PMD to optimize
>Rx path.
>> + *
>> + * @param port_id
>> + *   The port identifier of the Ethernet device.
>> + * @param ptype_mask
>> + *   The ptype family that application is interested in.
>> + * @param set_ptypes
>> + *   An array pointer to store set packet types, allocated by caller. The
>> + *   function marks the end of array with RTE_PTYPE_UNKNOWN.
>> + * @param num
>> + *   Size of the array pointed by param ptypes.
>> + *   Should be rte_eth_dev_get_supported_ptypes() + 1 to
>accomodate the
>> + *   set ptypes.
>> + * @return
>> + *   - (0) if Success.
>> + *   - (-ENODEV) if *port_id* invalid.
>> + *   - (-EINVAL) if *ptype_mask* is invalid.
>
>or set_ptype is NULL when num is greater than zero.
>
>> + */
>> +__rte_experimental
>> +int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t
>ptype_mask,
>> +				     uint32_t *set_ptypes, int num);
>>
>>   /**
>>    * Retrieve the MTU of an Ethernet device.
>> diff --git a/lib/librte_ethdev/rte_ethdev_core.h
>b/lib/librte_ethdev/rte_ethdev_core.h
>> index 2922d5b7c..93bc34480 100644
>> --- a/lib/librte_ethdev/rte_ethdev_core.h
>> +++ b/lib/librte_ethdev/rte_ethdev_core.h
>> @@ -110,6 +110,10 @@ typedef void (*eth_dev_infos_get_t)(struct
>rte_eth_dev *dev,
>>   typedef const uint32_t
>*(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
>>   /**< @internal Get supported ptypes of an Ethernet device. */
>>
>> +typedef uint32_t (*eth_dev_supported_ptypes_set_t)(struct
>rte_eth_dev *dev,
>> +					      uint32_t ptype_mask);
>> +/**< @internal Inform device about packet types in which the
>recipient is interested. */
>> +
>>   typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
>>   				    uint16_t queue_id);
>>   /**< @internal Start rx and tx of a queue of an Ethernet device. */
>> @@ -421,6 +425,8 @@ struct eth_dev_ops {
>>   	eth_fw_version_get_t       fw_version_get; /**< Get firmware
>version. */
>>   	eth_dev_supported_ptypes_get_t
>dev_supported_ptypes_get;
>>   	/**< Get packet types supported and identified by device. */
>> +	eth_dev_supported_ptypes_set_t
>dev_supported_ptypes_set;
>> +	/**< Inform device about packet types in which the recipient is
>interested. */
>>
>>   	vlan_filter_set_t          vlan_filter_set; /**< Filter VLAN Setup. */
>>   	vlan_tpid_set_t            vlan_tpid_set; /**< Outer/Inner VLAN
>TPID Setup. */
>> diff --git a/lib/librte_ethdev/rte_ethdev_version.map
>b/lib/librte_ethdev/rte_ethdev_version.map
>> index 6df42a47b..e14745b9c 100644
>> --- a/lib/librte_ethdev/rte_ethdev_version.map
>> +++ b/lib/librte_ethdev/rte_ethdev_version.map
>> @@ -283,4 +283,7 @@ EXPERIMENTAL {
>>
>>   	# added in 19.08
>>   	rte_eth_read_clock;
>> +
>> +	# added in 19.11
>> +	rte_eth_dev_set_supported_ptypes;
>>   };


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function
  2019-10-01  7:36 [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function Pavan Nikhilesh Bhagavatula
@ 2019-10-01  8:02 ` Andrew Rybchenko
  0 siblings, 0 replies; 4+ messages in thread
From: Andrew Rybchenko @ 2019-10-01  8:02 UTC (permalink / raw)
  To: Pavan Nikhilesh Bhagavatula, Jerin Jacob Kollanukkaran,
	John McNamara, Marko Kovacevic, Thomas Monjalon, Ferruh Yigit
  Cc: dev

On 10/1/19 10:36 AM, Pavan Nikhilesh Bhagavatula wrote:
>> -----Original Message-----
>> From: Andrew Rybchenko <arybchenko@solarflare.com>
>> Sent: Tuesday, October 1, 2019 12:34 PM
>> To: Pavan Nikhilesh Bhagavatula <pbhagavatula@marvell.com>; Jerin
>> Jacob Kollanukkaran <jerinj@marvell.com>; John McNamara
>> <john.mcnamara@intel.com>; Marko Kovacevic
>> <marko.kovacevic@intel.com>; Thomas Monjalon
>> <thomas@monjalon.net>; Ferruh Yigit <ferruh.yigit@intel.com>
>> Cc: dev@dpdk.org
>> Subject: [EXT] Re: [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype
>> function
>> On 10/1/19 9:34 AM, pbhagavatula@marvell.com wrote:
>>> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>>>
>>> Add `rte_eth_dev_set_supported_ptypes` function that will allow the
>>> application to inform the PMD the packet types it is interested in.
>>> Based on the ptypes set PMDs can optimize their Rx path.
>>>
>>> -If application doesn’t want any ptype information it can call
>>> `rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
>>> and PMD may skip packet type processing and set rte_mbuf::packet_type to
>>> RTE_PTYPE_UNKNOWN.
>>>
>>> -If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
>>> return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
>>> -If application is interested only in L2/L3 layer, it can inform the PMD
>>> to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
>>> `rte_eth_dev_set_supported_ptypes(ethdev_id,
>>> 		RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
>>> Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
>>> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

[snip]
  

>>> +		if (ptype_mask & all_ptypes[i]) {
>> Should it be done if all_ptypes[i] have some bits out of ptype_mask?
>> Should set_ptypes have bits out of ptype_mask when set below?
>>
> Isn't all_ptypes[i] enum?. It makes sense if it's a bit mask.
> Get ptypes has a similar logic.

My bad. You're right.


^ permalink raw reply	[flat|nested] 4+ messages in thread

* Re: [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function
  2019-10-01  6:34   ` [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function pbhagavatula
@ 2019-10-01  7:04     ` Andrew Rybchenko
  0 siblings, 0 replies; 4+ messages in thread
From: Andrew Rybchenko @ 2019-10-01  7:04 UTC (permalink / raw)
  To: pbhagavatula, jerinj, John McNamara, Marko Kovacevic,
	Thomas Monjalon, Ferruh Yigit
  Cc: dev

On 10/1/19 9:34 AM, pbhagavatula@marvell.com wrote:
> From: Pavan Nikhilesh <pbhagavatula@marvell.com>
>
> Add `rte_eth_dev_set_supported_ptypes` function that will allow the
> application to inform the PMD the packet types it is interested in.
> Based on the ptypes set PMDs can optimize their Rx path.
>
> -If application doesn’t want any ptype information it can call
> `rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
> and PMD may skip packet type processing and set rte_mbuf::packet_type to
> RTE_PTYPE_UNKNOWN.
>
> -If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
> return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.
>
> -If application is interested only in L2/L3 layer, it can inform the PMD
> to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
> `rte_eth_dev_set_supported_ptypes(ethdev_id,
> 		RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.
>
> Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
> Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>



> diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
> index 27cfbd9e3..7e31b9401 100644
> --- a/doc/guides/rel_notes/release_19_11.rst
> +++ b/doc/guides/rel_notes/release_19_11.rst
> @@ -56,6 +56,13 @@ New Features
>        Also, make sure to start the actual text at the margin.
>        =========================================================
>   
> +* **Added ethdev API to set supported packet types**
> +
> +  *  Added new API ``rte_eth_dev_set_supported_ptypes`` that allows an
> +     application to inform PMD about packet types classification the application
> +     is interested in
> +  *  This scheme will allow PMDs to avoid lookup to internal ptype table on Rx
> +     and thereby improve Rx performance if application wishes do so.

Extra empty line is required here in accordance with documentation 
guidelines.

>   Removed Items
>   -------------
> diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
> index 17d183e1f..061de7ac5 100644
> --- a/lib/librte_ethdev/rte_ethdev.c
> +++ b/lib/librte_ethdev/rte_ethdev.c
> @@ -2602,6 +2602,44 @@ rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
>   	return j;
>   }
>   
> +int
> +rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
> +				 uint32_t *set_ptypes, int num)

May be num should be unsigned int?

> +{
> +	int i, j;
> +	struct rte_eth_dev *dev;
> +	const uint32_t *all_ptypes;
> +
> +	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
> +	dev = &rte_eth_devices[port_id];
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_get, 0);
> +	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_set, 0);

if (num > 0 && set_ptypes == NULL)
     return -EINVAL;

> +
> +	if (ptype_mask == 0)

if (num > 0)
      set_ptypes[0] = RTE_PTYPE_UNKNOWN;

> +		return (*dev->dev_ops->dev_supported_ptypes_set)(dev,
> +				ptype_mask);
> +
> +	all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
> +	if (all_ptypes == NULL)

if (num > 0)
      set_ptypes[0] = RTE_PTYPE_UNKNOWN;

> +		return 0;
> +
> +	for (i = 0, j = 0; set_ptypes && (all_ptypes[i] != RTE_PTYPE_UNKNOWN);

set_ptypes != NULL in accordance with coding guidelines

> +									++i) {

Please, consider to put condition check and increment in its own lines.
IMHO, above it a bit hard to read.

> +		if (ptype_mask & all_ptypes[i]) {

Should it be done if all_ptypes[i] have some bits out of ptype_mask?
Should set_ptypes have bits out of ptype_mask when set below?

> +			if (j < num - 1) {
> +				set_ptypes[j] = all_ptypes[i];
> +				j++;
> +				continue;
> +			}
> +			break;

Do we need an indication if provided set_ptype is not enough
to return all ptypes? I think it should be explained/highlighted
in the function description with explanation why.

> +		}
> +	}
> +
> +	set_ptypes[j] = RTE_PTYPE_UNKNOWN;

I think we should allow set_ptypes == NULL if num == 0.
So, it should be set here if not NULL only.

> +
> +	return (*dev->dev_ops->dev_supported_ptypes_set)(dev, ptype_mask);
> +}
> +
>   void
>   rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
>   {
> diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
> index d9871782e..6c5fd789a 100644
> --- a/lib/librte_ethdev/rte_ethdev.h
> +++ b/lib/librte_ethdev/rte_ethdev.h
> @@ -2431,6 +2431,35 @@ int rte_eth_dev_fw_version_get(uint16_t port_id,
>    */
>   int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
>   				     uint32_t *ptypes, int num);
> +/**
> + * @warning
> + * @b EXPERIMENTAL: this API may change without prior notice.
> + *
> + * Inform Ethernet device of the packet types classification in which
> + * the recipient is interested.
> + *
> + * Application can use this function to set only specific ptypes that it's
> + * interested. This information can be used by the PMD to optimize Rx path.
> + *
> + * @param port_id
> + *   The port identifier of the Ethernet device.
> + * @param ptype_mask
> + *   The ptype family that application is interested in.
> + * @param set_ptypes
> + *   An array pointer to store set packet types, allocated by caller. The
> + *   function marks the end of array with RTE_PTYPE_UNKNOWN.
> + * @param num
> + *   Size of the array pointed by param ptypes.
> + *   Should be rte_eth_dev_get_supported_ptypes() + 1 to accomodate the
> + *   set ptypes.
> + * @return
> + *   - (0) if Success.
> + *   - (-ENODEV) if *port_id* invalid.
> + *   - (-EINVAL) if *ptype_mask* is invalid.

or set_ptype is NULL when num is greater than zero.

> + */
> +__rte_experimental
> +int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
> +				     uint32_t *set_ptypes, int num);
>   
>   /**
>    * Retrieve the MTU of an Ethernet device.
> diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
> index 2922d5b7c..93bc34480 100644
> --- a/lib/librte_ethdev/rte_ethdev_core.h
> +++ b/lib/librte_ethdev/rte_ethdev_core.h
> @@ -110,6 +110,10 @@ typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
>   typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
>   /**< @internal Get supported ptypes of an Ethernet device. */
>   
> +typedef uint32_t (*eth_dev_supported_ptypes_set_t)(struct rte_eth_dev *dev,
> +					      uint32_t ptype_mask);
> +/**< @internal Inform device about packet types in which the recipient is interested. */
> +
>   typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
>   				    uint16_t queue_id);
>   /**< @internal Start rx and tx of a queue of an Ethernet device. */
> @@ -421,6 +425,8 @@ struct eth_dev_ops {
>   	eth_fw_version_get_t       fw_version_get; /**< Get firmware version. */
>   	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
>   	/**< Get packet types supported and identified by device. */
> +	eth_dev_supported_ptypes_set_t dev_supported_ptypes_set;
> +	/**< Inform device about packet types in which the recipient is interested. */
>   
>   	vlan_filter_set_t          vlan_filter_set; /**< Filter VLAN Setup. */
>   	vlan_tpid_set_t            vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
> diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
> index 6df42a47b..e14745b9c 100644
> --- a/lib/librte_ethdev/rte_ethdev_version.map
> +++ b/lib/librte_ethdev/rte_ethdev_version.map
> @@ -283,4 +283,7 @@ EXPERIMENTAL {
>   
>   	# added in 19.08
>   	rte_eth_read_clock;
> +
> +	# added in 19.11
> +	rte_eth_dev_set_supported_ptypes;
>   };


^ permalink raw reply	[flat|nested] 4+ messages in thread

* [dpdk-dev]  [PATCH v4 1/7] ethdev: add set ptype function
  2019-10-01  6:34 ` [dpdk-dev] [PATCH v4 " pbhagavatula
@ 2019-10-01  6:34   ` pbhagavatula
  2019-10-01  7:04     ` Andrew Rybchenko
  0 siblings, 1 reply; 4+ messages in thread
From: pbhagavatula @ 2019-10-01  6:34 UTC (permalink / raw)
  To: arybchenko, jerinj, John McNamara, Marko Kovacevic,
	Thomas Monjalon, Ferruh Yigit
  Cc: dev, Pavan Nikhilesh

From: Pavan Nikhilesh <pbhagavatula@marvell.com>

Add `rte_eth_dev_set_supported_ptypes` function that will allow the
application to inform the PMD the packet types it is interested in.
Based on the ptypes set PMDs can optimize their Rx path.

-If application doesn’t want any ptype information it can call
`rte_eth_dev_set_supported_ptypes(ethdev_id, RTE_PTYPE_UNKNOWN, NULL, 0)`
and PMD may skip packet type processing and set rte_mbuf::packet_type to
RTE_PTYPE_UNKNOWN.

-If application doesn’t call `rte_eth_dev_set_supported_ptypes` PMD can
return `rte_mbuf::packet_type` with `rte_eth_dev_get_supported_ptypes`.

-If application is interested only in L2/L3 layer, it can inform the PMD
to update `rte_mbuf::packet_type` with L2/L3 ptype by calling
`rte_eth_dev_set_supported_ptypes(ethdev_id,
		RTE_PTYPE_L2_MASK | RTE_PTYPE_L3_MASK, NULL, 0)`.

Suggested-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>
---
 doc/guides/nics/features.rst             |  8 +++--
 doc/guides/rel_notes/release_19_11.rst   |  7 +++++
 lib/librte_ethdev/rte_ethdev.c           | 38 ++++++++++++++++++++++++
 lib/librte_ethdev/rte_ethdev.h           | 29 ++++++++++++++++++
 lib/librte_ethdev/rte_ethdev_core.h      |  6 ++++
 lib/librte_ethdev/rte_ethdev_version.map |  3 ++
 6 files changed, 89 insertions(+), 2 deletions(-)

diff --git a/doc/guides/nics/features.rst b/doc/guides/nics/features.rst
index c4e128d2f..1756fa73a 100644
--- a/doc/guides/nics/features.rst
+++ b/doc/guides/nics/features.rst
@@ -583,9 +583,13 @@ Packet type parsing
 -------------------
 
 Supports packet type parsing and returns a list of supported types.
+Allows application to set ptypes it is interested in.
 
-* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``.
-* **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``.
+* **[implements] eth_dev_ops**: ``dev_supported_ptypes_get``,
+  ``dev_supported_ptypes_set``.
+* **[related]    API**: ``rte_eth_dev_get_supported_ptypes()``,
+  ``rte_eth_dev_set_supported_ptypes()``.
+* **[provides]   mbuf**: ``mbuf.packet_type``.
 
 
 .. _nic_features_timesync:
diff --git a/doc/guides/rel_notes/release_19_11.rst b/doc/guides/rel_notes/release_19_11.rst
index 27cfbd9e3..7e31b9401 100644
--- a/doc/guides/rel_notes/release_19_11.rst
+++ b/doc/guides/rel_notes/release_19_11.rst
@@ -56,6 +56,13 @@ New Features
      Also, make sure to start the actual text at the margin.
      =========================================================
 
+* **Added ethdev API to set supported packet types**
+
+  *  Added new API ``rte_eth_dev_set_supported_ptypes`` that allows an
+     application to inform PMD about packet types classification the application
+     is interested in
+  *  This scheme will allow PMDs to avoid lookup to internal ptype table on Rx
+     and thereby improve Rx performance if application wishes do so.
 
 Removed Items
 -------------
diff --git a/lib/librte_ethdev/rte_ethdev.c b/lib/librte_ethdev/rte_ethdev.c
index 17d183e1f..061de7ac5 100644
--- a/lib/librte_ethdev/rte_ethdev.c
+++ b/lib/librte_ethdev/rte_ethdev.c
@@ -2602,6 +2602,44 @@ rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
 	return j;
 }
 
+int
+rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+				 uint32_t *set_ptypes, int num)
+{
+	int i, j;
+	struct rte_eth_dev *dev;
+	const uint32_t *all_ptypes;
+
+	RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV);
+	dev = &rte_eth_devices[port_id];
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_get, 0);
+	RTE_FUNC_PTR_OR_ERR_RET(*dev->dev_ops->dev_supported_ptypes_set, 0);
+
+	if (ptype_mask == 0)
+		return (*dev->dev_ops->dev_supported_ptypes_set)(dev,
+				ptype_mask);
+
+	all_ptypes = (*dev->dev_ops->dev_supported_ptypes_get)(dev);
+	if (all_ptypes == NULL)
+		return 0;
+
+	for (i = 0, j = 0; set_ptypes && (all_ptypes[i] != RTE_PTYPE_UNKNOWN);
+									++i) {
+		if (ptype_mask & all_ptypes[i]) {
+			if (j < num - 1) {
+				set_ptypes[j] = all_ptypes[i];
+				j++;
+				continue;
+			}
+			break;
+		}
+	}
+
+	set_ptypes[j] = RTE_PTYPE_UNKNOWN;
+
+	return (*dev->dev_ops->dev_supported_ptypes_set)(dev, ptype_mask);
+}
+
 void
 rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr)
 {
diff --git a/lib/librte_ethdev/rte_ethdev.h b/lib/librte_ethdev/rte_ethdev.h
index d9871782e..6c5fd789a 100644
--- a/lib/librte_ethdev/rte_ethdev.h
+++ b/lib/librte_ethdev/rte_ethdev.h
@@ -2431,6 +2431,35 @@ int rte_eth_dev_fw_version_get(uint16_t port_id,
  */
 int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
 				     uint32_t *ptypes, int num);
+/**
+ * @warning
+ * @b EXPERIMENTAL: this API may change without prior notice.
+ *
+ * Inform Ethernet device of the packet types classification in which
+ * the recipient is interested.
+ *
+ * Application can use this function to set only specific ptypes that it's
+ * interested. This information can be used by the PMD to optimize Rx path.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param ptype_mask
+ *   The ptype family that application is interested in.
+ * @param set_ptypes
+ *   An array pointer to store set packet types, allocated by caller. The
+ *   function marks the end of array with RTE_PTYPE_UNKNOWN.
+ * @param num
+ *   Size of the array pointed by param ptypes.
+ *   Should be rte_eth_dev_get_supported_ptypes() + 1 to accomodate the
+ *   set ptypes.
+ * @return
+ *   - (0) if Success.
+ *   - (-ENODEV) if *port_id* invalid.
+ *   - (-EINVAL) if *ptype_mask* is invalid.
+ */
+__rte_experimental
+int rte_eth_dev_set_supported_ptypes(uint16_t port_id, uint32_t ptype_mask,
+				     uint32_t *set_ptypes, int num);
 
 /**
  * Retrieve the MTU of an Ethernet device.
diff --git a/lib/librte_ethdev/rte_ethdev_core.h b/lib/librte_ethdev/rte_ethdev_core.h
index 2922d5b7c..93bc34480 100644
--- a/lib/librte_ethdev/rte_ethdev_core.h
+++ b/lib/librte_ethdev/rte_ethdev_core.h
@@ -110,6 +110,10 @@ typedef void (*eth_dev_infos_get_t)(struct rte_eth_dev *dev,
 typedef const uint32_t *(*eth_dev_supported_ptypes_get_t)(struct rte_eth_dev *dev);
 /**< @internal Get supported ptypes of an Ethernet device. */
 
+typedef uint32_t (*eth_dev_supported_ptypes_set_t)(struct rte_eth_dev *dev,
+					      uint32_t ptype_mask);
+/**< @internal Inform device about packet types in which the recipient is interested. */
+
 typedef int (*eth_queue_start_t)(struct rte_eth_dev *dev,
 				    uint16_t queue_id);
 /**< @internal Start rx and tx of a queue of an Ethernet device. */
@@ -421,6 +425,8 @@ struct eth_dev_ops {
 	eth_fw_version_get_t       fw_version_get; /**< Get firmware version. */
 	eth_dev_supported_ptypes_get_t dev_supported_ptypes_get;
 	/**< Get packet types supported and identified by device. */
+	eth_dev_supported_ptypes_set_t dev_supported_ptypes_set;
+	/**< Inform device about packet types in which the recipient is interested. */
 
 	vlan_filter_set_t          vlan_filter_set; /**< Filter VLAN Setup. */
 	vlan_tpid_set_t            vlan_tpid_set; /**< Outer/Inner VLAN TPID Setup. */
diff --git a/lib/librte_ethdev/rte_ethdev_version.map b/lib/librte_ethdev/rte_ethdev_version.map
index 6df42a47b..e14745b9c 100644
--- a/lib/librte_ethdev/rte_ethdev_version.map
+++ b/lib/librte_ethdev/rte_ethdev_version.map
@@ -283,4 +283,7 @@ EXPERIMENTAL {
 
 	# added in 19.08
 	rte_eth_read_clock;
+
+	# added in 19.11
+	rte_eth_dev_set_supported_ptypes;
 };
-- 
2.17.1


^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2019-10-01  8:02 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-10-01  7:36 [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function Pavan Nikhilesh Bhagavatula
2019-10-01  8:02 ` Andrew Rybchenko
  -- strict thread matches above, loose matches on Subject: below --
2019-09-29 21:19 [dpdk-dev] [PATCH v3 0/7] ethdev: add new Rx offload flags pbhagavatula
2019-10-01  6:34 ` [dpdk-dev] [PATCH v4 " pbhagavatula
2019-10-01  6:34   ` [dpdk-dev] [PATCH v4 1/7] ethdev: add set ptype function pbhagavatula
2019-10-01  7:04     ` Andrew Rybchenko

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).