* [dpdk-dev] [PATCH 1/2] scripts: add auto-config-h.sh
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
@ 2015-01-29 15:20 ` Adrien Mazarguil
2015-01-29 15:20 ` [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver Adrien Mazarguil
` (5 subsequent siblings)
6 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-01-29 15:20 UTC (permalink / raw)
To: dev
This script looks for types, macros and functions in header files using
compilation options found in the environment (CC, CFLAGS, CPPFLAGS) to
define feature macros in a generated header.
Useful in combination with external headers that do not provide such macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
scripts/auto-config-h.sh | 137 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100755 scripts/auto-config-h.sh
diff --git a/scripts/auto-config-h.sh b/scripts/auto-config-h.sh
new file mode 100755
index 0000000..d897e80
--- /dev/null
+++ b/scripts/auto-config-h.sh
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# BSD LICENSE
+#
+# Copyright(c) 2014-2015 6WIND S.A.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Crude script to detect whether particular types, macros and functions are
+# defined by trying to compile a file with a given header. Can be used to
+# perform cross-platform checks since the resulting object file is not
+# executed.
+#
+# Set VERBOSE=1 in the environment to display compiler output and errors.
+#
+# CC, CPPFLAGS, CFLAGS, EXTRA_CPPFLAGS and EXTRA_CFLAGS are taken from the
+# environment.
+#
+# AUTO_CONFIG_CFLAGS may append additional CFLAGS without modifying the
+# above variables.
+
+file=${1:?output file name required (config.h)}
+macro=${2:?output macro name required (HAVE_*)}
+include=${3:?include name required (foo.h)}
+type=${4:?object type required (define, enum, type, field, func)}
+name=${5:?define/type/function name required}
+
+: ${CC:=cc}
+
+temp=/tmp/${0##*/}.$$.c
+
+case $type in
+define)
+ code="\
+#ifndef $name
+#error $name not defined
+#endif
+"
+ ;;
+enum)
+ code="\
+long test____ = $name;
+"
+ ;;
+type)
+ code="\
+$name test____;
+"
+ ;;
+field)
+ code="\
+void test____(void)
+{
+ ${name%%.*} test_____;
+
+ (void)test_____.${name#*.};
+}
+"
+ ;;
+func)
+ code="\
+void (*test____)() = (void (*)())$name;
+"
+ ;;
+*)
+ unset error
+ : ${error:?unknown object type \"$type\"}
+ exit
+esac
+
+if [ "${VERBOSE}" = 1 ]
+then
+ err=2
+ out=1
+ eol='
+'
+else
+ exec 3> /dev/null ||
+ exit
+ err=3
+ out=3
+ eol=' '
+fi &&
+printf 'Looking for %s %s in %s.%s' \
+ "${name}" "${type}" "${include}" "${eol}" &&
+printf "\
+#include <%s>
+
+%s
+" "$include" "$code" > "${temp}" &&
+if ${CC} ${CPPFLAGS} ${EXTRA_CPPFLAGS} ${CFLAGS} ${EXTRA_CFLAGS} \
+ ${AUTO_CONFIG_CFLAGS} \
+ -c -o /dev/null "${temp}" 1>&${out} 2>&${err}
+then
+ rm -f "${temp}"
+ printf "\
+#ifndef %s
+#define %s 1
+#endif /* %s */
+
+" "${macro}" "${macro}" "${macro}" >> "${file}" &&
+ printf 'Defining %s.\n' "${macro}"
+else
+ rm -f "${temp}"
+ printf "\
+/* %s is not defined. */
+
+" "${macro}" >> "${file}" &&
+ printf 'Not defining %s.\n' "${macro}"
+fi
+
+exit
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-01-29 15:20 ` [dpdk-dev] [PATCH 1/2] scripts: add auto-config-h.sh Adrien Mazarguil
@ 2015-01-29 15:20 ` Adrien Mazarguil
2015-01-29 15:37 ` Stephen Hemminger
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 0/4] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (4 subsequent siblings)
6 siblings, 1 reply; 24+ messages in thread
From: Adrien Mazarguil @ 2015-01-29 15:20 UTC (permalink / raw)
To: dev
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
---
config/common_bsdapp | 11 +
config/common_linuxapp | 11 +
lib/Makefile | 1 +
lib/librte_pmd_mlx4/Makefile | 119 ++
lib/librte_pmd_mlx4/mlx4.c | 4739 ++++++++++++++++++++++++++++++++++++++++++
lib/librte_pmd_mlx4/mlx4.h | 166 ++
mk/rte.app.mk | 8 +
7 files changed, 5055 insertions(+)
create mode 100755 lib/librte_pmd_mlx4/Makefile
create mode 100755 lib/librte_pmd_mlx4/mlx4.c
create mode 100644 lib/librte_pmd_mlx4/mlx4.h
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 9177db1..f7b3fe1 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -182,6 +182,17 @@ CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 2f9643b..0cec157 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -180,6 +180,17 @@ CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VM=4
CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index 0ffc982..9f1994d 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -43,6 +43,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_ETHER) += librte_ether
DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += librte_pmd_e1000
DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
+DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += librte_pmd_mlx4
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/lib/librte_pmd_mlx4/Makefile b/lib/librte_pmd_mlx4/Makefile
new file mode 100755
index 0000000..9a6c891
--- /dev/null
+++ b/lib/librte_pmd_mlx4/Makefile
@@ -0,0 +1,119 @@
+# BSD LICENSE
+#
+# Copyright(c) 2012-2015 6WIND S.A.
+# Copyright(c) 2012 Mellanox.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name.
+LIB = librte_pmd_mlx4.a
+
+# Sources.
+SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c
+
+# Dependencies.
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_malloc
+
+# Basic CFLAGS.
+CFLAGS += -O3
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -g
+CFLAGS += -I.
+CFLAGS += -D_XOPEN_SOURCE=600
+CFLAGS += $(WERROR_FLAGS)
+
+# A few warnings cannot be avoided in external headers.
+CFLAGS += -Wno-error=cast-qual
+
+# DEBUG which is usually provided on the command-line may enable
+# CONFIG_RTE_LIBRTE_MLX4_DEBUG.
+ifeq ($(DEBUG),1)
+CONFIG_RTE_LIBRTE_MLX4_DEBUG := y
+endif
+
+# User-defined CFLAGS.
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_DEBUG),y)
+CFLAGS += -pedantic -UNDEBUG -DPEDANTIC
+else
+CFLAGS += -DNDEBUG -UPEDANTIC
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N
+CFLAGS += -DMLX4_PMD_SGE_WR_N=$(CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE
+CFLAGS += -DMLX4_PMD_MAX_INLINE=$(CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE
+CFLAGS += -DMLX4_PMD_TX_MP_CACHE=$(CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS
+CFLAGS += -DMLX4_PMD_SOFT_COUNTERS=$(CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE
+CFLAGS += -DMLX4_PMD_COMPAT_VMWARE=$(CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE)
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
+
+# Generate and clean-up mlx4_autoconf.h.
+
+export CC CFLAGS CPPFLAGS EXTRA_CFLAGS EXTRA_CPPFLAGS
+export AUTO_CONFIG_CFLAGS = -Wno-error
+
+mlx4_autoconf.h: $(RTE_SDK)/scripts/auto-config-h.sh
+ $Q $(RM) -f -- '$@'
+ $Q sh -- '$<' '$@' \
+ RSS_SUPPORT \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_UD_RSS
+ $Q sh -- '$<' '$@' \
+ INLINE_RECV \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ
+ $Q sh -- '$<' '$@' \
+ SEND_RAW_WR_SUPPORT \
+ infiniband/verbs.h \
+ type 'struct ibv_send_wr_raw'
+
+mlx4.o: mlx4_autoconf.h
+
+clean_mlx4: FORCE
+ $Q rm -f -- mlx4_autoconf.h
+
+clean: clean_mlx4
diff --git a/lib/librte_pmd_mlx4/mlx4.c b/lib/librte_pmd_mlx4/mlx4.c
new file mode 100755
index 0000000..71c75ad
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.c
@@ -0,0 +1,4739 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012-2015 6WIND S.A.
+ * Copyright(c) 2012 Mellanox.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Known limitations:
+ * - Multiple RX VLAN filters can be configured, but only the first one
+ * works properly.
+ * - RSS hash key and options cannot be modified.
+ * - Hardware counters aren't implemented.
+ */
+
+/* System headers. */
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <limits.h>
+#include <assert.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <linux/if.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+
+/* DPDK headers don't like -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <rte_config.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_dev.h>
+#include <rte_mbuf.h>
+#include <rte_errno.h>
+#include <rte_mempool.h>
+#include <rte_prefetch.h>
+#include <rte_malloc.h>
+#include <rte_spinlock.h>
+#include <rte_atomic.h>
+#include <rte_version.h>
+#include <rte_log.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+
+#include <infiniband/verbs.h>
+
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Generated configuration header. */
+#include "mlx4_autoconf.h"
+
+/* PMD header. */
+#include "mlx4.h"
+
+/* Runtime logging through RTE_LOG() is enabled when not in debugging mode.
+ * Intermediate LOG_*() macros add the required end-of-line characters. */
+#ifndef NDEBUG
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, MLX4_DRIVER_NAME ": " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, __VA_ARGS__)
+#endif
+
+/* Convenience macros for accessing mbuf fields. */
+#define NEXT(m) (m)->next
+#define DATA_LEN(m) (m)->data_len
+#define PKT_LEN(m) (m)->pkt_len
+#define DATA_OFF(m) (m)->data_off
+#define SET_DATA_OFF(m, o) ((m)->data_off = (o))
+#define NB_SEGS(m) (m)->nb_segs
+#define PORT(m) (m)->port
+
+/* Work Request ID data type (64 bit). */
+typedef union {
+ struct {
+ uint32_t id;
+ uint16_t offset;
+ } data;
+ uint64_t raw;
+} wr_id_t;
+
+#define WR_ID(o) ((wr_id_t *)&(o))->data
+
+/* Compile-time check. */
+static inline void wr_id_t_check(void)
+{
+ wr_id_t check[1 + (2 * -!(sizeof(wr_id_t) == sizeof(uint64_t)))];
+
+ (void)check;
+ (void)wr_id_t_check;
+}
+
+/* If raw send operations are available, use them since they are faster. */
+#ifdef SEND_RAW_WR_SUPPORT
+typedef struct ibv_send_wr_raw mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send_raw
+#else
+typedef struct ibv_send_wr mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send
+#endif
+
+struct mlx4_rxq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t ipackets; /**< Total of successfully received packets. */
+ uint64_t ibytes; /**< Total of successfully received bytes. */
+#endif
+ uint64_t idropped; /**< Total of packets dropped when RX ring full. */
+ uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
+};
+
+struct mlx4_txq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t opackets; /**< Total of successfully sent packets. */
+ uint64_t obytes; /**< Total of successfully sent bytes. */
+#endif
+ uint64_t odropped; /**< Total of packets not sent when TX ring full. */
+};
+
+/* RX element (scattered packets). */
+struct rxq_elt_sp {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ struct rte_mbuf *bufs[MLX4_PMD_SGE_WR_N]; /* SGEs buffers. */
+};
+
+/* RX element. */
+struct rxq_elt {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sge; /* Scatter/Gather Element. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* RX queue descriptor. */
+struct rxq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct rte_mempool *mp; /* Memory Pool for allocations. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+ /*
+ * There is exactly one flow configured per MAC address. Each flow
+ * may contain several specifications, one per configured VLAN ID.
+ */
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ struct ibv_exp_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES];
+ struct ibv_exp_flow *promisc_flow; /* Promiscuous flow. */
+ struct ibv_exp_flow *allmulti_flow; /* Multicast flow. */
+ unsigned int port_id; /* Port ID for incoming packets. */
+ unsigned int elts_n; /* (*elts)[] length. */
+ union {
+ struct rxq_elt_sp (*sp)[]; /* Scattered RX elements. */
+ struct rxq_elt (*no_sp)[]; /* RX elements. */
+ } elts;
+ unsigned int sp:1; /* Use scattered RX elements. */
+ uint32_t mb_len; /* Length of a mp-issued mbuf. */
+ struct mlx4_rxq_stats stats; /* RX queue counters. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+/* TX element. */
+struct txq_elt {
+ mlx4_send_wr_t wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* Linear buffer type. It is used when transmitting buffers with too many
+ * segments that do not fit the hardware queue (see max_send_sge).
+ * Extra segments are copied (linearized) in such buffers, replacing the
+ * last SGE during TX.
+ * The size is arbitrary but large enough to hold a jumbo frame with
+ * 8 segments considering mbuf.buf_len is about 2048 bytes. */
+typedef uint8_t linear_t[16384];
+
+/* TX queue descriptor. */
+struct txq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct {
+ struct rte_mempool *mp; /* Cached Memory Pool. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ uint32_t lkey; /* mr->lkey */
+ } mp2mr[MLX4_PMD_TX_MP_CACHE]; /* MP to MR translation table. */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+#if MLX4_PMD_MAX_INLINE > 0
+ uint32_t max_inline; /* Max inline send size <= MLX4_PMD_MAX_INLINE. */
+#endif
+ unsigned int elts_n; /* (*elts)[] length. */
+ struct txq_elt (*elts)[]; /* TX elements. */
+ unsigned int elts_head; /* Current index in (*elts)[]. */
+ unsigned int elts_tail; /* First element awaiting completion. */
+ unsigned int elts_comp; /* Number of completion requests. */
+ struct mlx4_txq_stats stats; /* TX queue counters. */
+ linear_t (*elts_linear)[]; /* Linearized buffers. */
+ struct ibv_mr *mr_linear; /* Memory Region for linearized buffers. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+struct priv {
+ struct rte_eth_dev *dev; /* Ethernet device. */
+ struct ibv_context *ctx; /* Verbs context. */
+ struct ibv_device_attr device_attr; /* Device properties. */
+ struct ibv_port_attr port_attr; /* Physical port properties. */
+ struct ibv_pd *pd; /* Protection Domain. */
+ /*
+ * MAC addresses array and configuration bit-field.
+ * An extra entry that cannot be modified by the DPDK is reserved
+ * for broadcast frames (destination MAC address ff:ff:ff:ff:ff:ff).
+ */
+ struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ /* VLAN filters. */
+ struct {
+ unsigned int enabled:1; /* If enabled. */
+ unsigned int id:12; /* VLAN ID (0-4095). */
+ } vlan_filter[MLX4_MAX_VLAN_IDS]; /* VLAN filters table. */
+ /* Device properties. */
+ uint16_t mtu; /* Configured MTU. */
+ uint8_t port; /* Physical port number. */
+ unsigned int started:1; /* Device started, flows enabled. */
+ unsigned int promisc:1; /* Device in promiscuous mode. */
+ unsigned int promisc_ok:1; /* Promiscuous flow is supported. */
+ unsigned int allmulti:1; /* Device receives all multicast packets. */
+ unsigned int hw_qpg:1; /* QP groups are supported. */
+ unsigned int hw_tss:1; /* TSS is supported. */
+ unsigned int hw_rss:1; /* RSS is supported. */
+ unsigned int rss:1; /* RSS is enabled. */
+#ifdef MLX4_COMPAT_VMWARE
+ unsigned int vmware:1; /* Use VMware compatibility. */
+#endif
+ unsigned int vf:1; /* This is a VF device. */
+#ifdef INLINE_RECV
+ unsigned int inl_recv_size; /* Inline recv size */
+#endif
+ unsigned int max_rss_tbl_sz; /* Maximum number of RSS queues. */
+ /* RX/TX queues. */
+ struct rxq rxq_parent; /* Parent queue when RSS is enabled. */
+ unsigned int rxqs_n; /* RX queues array size. */
+ unsigned int txqs_n; /* TX queues array size. */
+ struct rxq *(*rxqs)[]; /* RX queues. */
+ struct txq *(*txqs)[]; /* TX queues. */
+ rte_spinlock_t lock; /* Lock for control functions. */
+};
+
+/**
+ * Lock private structure to protect it from concurrent access in the
+ * control path.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_lock(struct priv *priv)
+{
+ rte_spinlock_lock(&priv->lock);
+}
+
+/**
+ * Unlock private structure.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_unlock(struct priv *priv)
+{
+ rte_spinlock_unlock(&priv->lock);
+}
+
+/* Allocate a buffer on the stack and fill it with a printf format string. */
+#define MKSTR(name, ...) \
+ char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
+ \
+ snprintf(name, sizeof(name), __VA_ARGS__)
+
+/**
+ * Get interface name from private structure.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[out] ifname
+ * Interface name output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+{
+ int ret = -1;
+ DIR *dir;
+ struct dirent *dent;
+
+ {
+ MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
+
+ dir = opendir(path);
+ if (dir == NULL)
+ return -1;
+ }
+ while ((dent = readdir(dir)) != NULL) {
+ char *name = dent->d_name;
+ FILE *file;
+ unsigned int dev_id;
+ int r;
+
+ if ((name[0] == '.') &&
+ ((name[1] == '\0') ||
+ ((name[1] == '.') && (name[2] == '\0'))))
+ continue;
+
+ MKSTR(path, "%s/device/net/%s/dev_id",
+ priv->ctx->device->ibdev_path, name);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ continue;
+ r = fscanf(file, "%x", &dev_id);
+ fclose(file);
+ if ((r == 1) && (dev_id == (priv->port - 1u))) {
+ snprintf(*ifname, sizeof(*ifname), "%s", name);
+ ret = 0;
+ break;
+ }
+ }
+ closedir(dir);
+ return ret;
+}
+
+/**
+ * Read from sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[out] buf
+ * Data output buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_read(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ ret = fread(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) && (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Write to sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[in] buf
+ * Data buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_write(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "wb");
+ if (file == NULL)
+ return -1;
+ ret = fwrite(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) || (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Get unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param[out] value
+ * Value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
+{
+ int ret;
+ unsigned long value_ret;
+ char value_str[32];
+
+ ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot read %s value from sysfs: %s",
+ name, strerror(errno));
+ return -1;
+ }
+ value_str[ret] = '\0';
+ errno = 0;
+ value_ret = strtoul(value_str, NULL, 0);
+ if (errno) {
+ DEBUG("invalid %s value `%s': %s", name, value_str,
+ strerror(errno));
+ return -1;
+ }
+ *value = value_ret;
+ return 0;
+}
+
+/**
+ * Set unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param value
+ * Value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
+{
+ int ret;
+ MKSTR(value_str, "%lu", value);
+
+ ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
+ name, value_str, value, strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Perform ifreq ioctl() on associated Ethernet device.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param req
+ * Request number to pass to ioctl().
+ * @param[out] ifr
+ * Interface request structure output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+{
+ int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+ int ret = -1;
+
+ if (sock == -1)
+ return ret;
+ if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
+ ret = ioctl(sock, req, ifr);
+ close(sock);
+ return ret;
+}
+
+/**
+ * Get device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[out] mtu
+ * MTU value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_mtu(struct priv *priv, uint16_t *mtu)
+{
+ unsigned long ulong_mtu;
+
+ if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
+ return -1;
+ *mtu = ulong_mtu;
+ return 0;
+}
+
+/**
+ * Set device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mtu
+ * MTU value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_mtu(struct priv *priv, uint16_t mtu)
+{
+ return priv_set_sysfs_ulong(priv, "mtu", mtu);
+}
+
+/**
+ * Set device flags.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param keep
+ * Bitmask for flags that must remain untouched.
+ * @param flags
+ * Bitmask for flags to modify.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+{
+ unsigned long tmp;
+
+ if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
+ return -1;
+ tmp &= keep;
+ tmp |= flags;
+ return priv_set_sysfs_ulong(priv, "flags", tmp);
+}
+
+/* Device configuration. */
+
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp);
+
+static void
+rxq_cleanup(struct rxq *rxq);
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues.
+ * Allocate parent RSS queue when several RX queues are requested.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int rxqs_n = dev->data->nb_rx_queues;
+ unsigned int txqs_n = dev->data->nb_tx_queues;
+ unsigned int tmp;
+ int ret;
+
+ priv->rxqs = (void *)dev->data->rx_queues;
+ priv->txqs = (void *)dev->data->tx_queues;
+ if (txqs_n != priv->txqs_n) {
+ INFO("%p: TX queues number update: %u -> %u",
+ (void *)dev, priv->txqs_n, txqs_n);
+ priv->txqs_n = txqs_n;
+ }
+ if (rxqs_n == priv->rxqs_n)
+ return 0;
+ INFO("%p: RX queues number update: %u -> %u",
+ (void *)dev, priv->rxqs_n, rxqs_n);
+ /* If RSS is enabled, disable it first. */
+ if (priv->rss) {
+ unsigned int i;
+
+ /* Only if there are no remaining child RX queues. */
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ return EINVAL;
+ rxq_cleanup(&priv->rxq_parent);
+ priv->rss = 0;
+ priv->rxqs_n = 0;
+ }
+ if (rxqs_n <= 1) {
+ /* Nothing else to do. */
+ priv->rxqs_n = rxqs_n;
+ return 0;
+ }
+ /* Allocate a new RSS parent queue if supported by hardware. */
+ if (!priv->hw_rss) {
+ ERROR("%p: only a single RX queue can be configured when"
+ " hardware doesn't support RSS",
+ (void *)dev);
+ return EINVAL;
+ }
+ /* Fail if hardware doesn't support that many RSS queues. */
+ if (rxqs_n >= priv->max_rss_tbl_sz) {
+ ERROR("%p: only %u RX queues can be configured for RSS",
+ (void *)dev, priv->max_rss_tbl_sz);
+ return EINVAL;
+ }
+ priv->rss = 1;
+ tmp = priv->rxqs_n;
+ priv->rxqs_n = rxqs_n;
+ ret = rxq_setup(dev, &priv->rxq_parent, 0, 0, NULL, NULL);
+ if (!ret)
+ return 0;
+ /* Failure, rollback. */
+ priv->rss = 0;
+ priv->rxqs_n = tmp;
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback for Ethernet device configuration.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = dev_configure(dev);
+ assert(ret >= 0);
+ priv_unlock(priv);
+ return -ret;
+}
+
+/* TX queues handling. */
+
+/**
+ * Allocate TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_alloc_elts(struct txq *txq, unsigned int elts_n)
+{
+ unsigned int i;
+ struct txq_elt (*elts)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts), 0, txq->socket);
+ linear_t (*elts_linear)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts_linear), 0,
+ txq->socket);
+ struct ibv_mr *mr_linear = NULL;
+ int ret = 0;
+
+ if ((elts == NULL) || (elts_linear == NULL)) {
+ ERROR("%p: can't allocate packets array", (void *)txq);
+ ret = ENOMEM;
+ goto error;
+ }
+ mr_linear =
+ ibv_reg_mr(txq->priv->pd, elts_linear, sizeof(*elts_linear),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (mr_linear == NULL) {
+ ERROR("%p: unable to configure MR, ibv_reg_mr() failed",
+ (void *)txq);
+ ret = EINVAL;
+ goto error;
+ }
+ for (i = 0; (i != elts_n); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+ mlx4_send_wr_t *wr = &elt->wr;
+
+ /* Configure WR. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset = 0;
+ wr->sg_list = &elt->sges[0];
+ wr->opcode = IBV_WR_SEND;
+ /* Other fields are updated during TX. */
+ }
+ DEBUG("%p: allocated and configured %u WRs", (void *)txq, elts_n);
+ txq->elts_n = elts_n;
+ txq->elts = elts;
+ txq->elts_head = 0;
+ txq->elts_tail = 0;
+ txq->elts_comp = 0;
+ txq->elts_linear = elts_linear;
+ txq->mr_linear = mr_linear;
+ assert(ret == 0);
+ return 0;
+error:
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts != NULL)
+ rte_free(elts);
+ DEBUG("%p: failed, freed everything", (void *)txq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_free_elts(struct txq *txq)
+{
+ unsigned int i;
+ unsigned int elts_n = txq->elts_n;
+ struct txq_elt (*elts)[elts_n] = txq->elts;
+ linear_t (*elts_linear)[elts_n] = txq->elts_linear;
+ struct ibv_mr *mr_linear = txq->mr_linear;
+
+ DEBUG("%p: freeing WRs", (void *)txq);
+ txq->elts_n = 0;
+ txq->elts = NULL;
+ txq->elts_linear = NULL;
+ txq->mr_linear = NULL;
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+
+ if (WR_ID(elt->wr.wr_id).offset == 0)
+ continue;
+ rte_pktmbuf_free((void *)(elt->sges[0].addr -
+ WR_ID(elt->wr.wr_id).offset));
+ }
+ rte_free(elts);
+}
+
+
+/**
+ * Clean up a TX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_cleanup(struct txq *txq)
+{
+ size_t i;
+
+ DEBUG("cleaning up %p", (void *)txq);
+ txq_free_elts(txq);
+ if (txq->qp != NULL)
+ claim_zero(ibv_destroy_qp(txq->qp));
+ if (txq->cq != NULL)
+ claim_zero(ibv_destroy_cq(txq->cq));
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (txq->mp2mr[i].mp == NULL)
+ break;
+ assert(txq->mp2mr[i].mr != NULL);
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ }
+ memset(txq, 0, sizeof(*txq));
+}
+
+/**
+ * Manage TX completions.
+ *
+ * When sending a burst, mlx4_tx_burst() posts several WRs.
+ * To improve performance, a completion event is only required for the last of
+ * them. Doing so discards completion information for other WRs, but this
+ * information would not be used anyway.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ *
+ * @return
+ * 0 on success, -1 on failure.
+ */
+static int
+txq_complete(struct txq *txq)
+{
+ unsigned int elts_comp = txq->elts_comp;
+ unsigned int elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ struct ibv_wc wcs[elts_comp];
+ int wcs_n;
+
+ if (unlikely(elts_comp == 0))
+ return 0;
+#ifdef DEBUG_SEND
+ DEBUG("%p: processing %u work requests completions",
+ (void *)txq, elts_comp);
+#endif
+ wcs_n = ibv_poll_cq(txq->cq, elts_comp, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("%p: ibv_poll_cq() failed (wcs_n=%d)",
+ (void *)txq, wcs_n);
+ return -1;
+ }
+ elts_comp -= wcs_n;
+ assert(elts_comp <= txq->elts_comp);
+ /*
+ * Work Completion ID contains the associated element index in
+ * (*txq->elts)[]. Since WCs are returned in order, we only need to
+ * look at the last WC to clear older Work Requests.
+ *
+ * Assume WC status is successful as nothing can be done about it
+ * anyway.
+ */
+ elts_tail = WR_ID(wcs[wcs_n - 1].wr_id).id;
+ /* Consume the last WC. */
+ if (++elts_tail >= elts_n)
+ elts_tail = 0;
+ txq->elts_tail = elts_tail;
+ txq->elts_comp = elts_comp;
+ return 0;
+}
+
+/**
+ * Get Memory Region (MR) <-> Memory Pool (MP) association from txq->mp2mr[].
+ * Add MP to txq->mp2mr[] if it's not registered yet. If mp2mr[] is full,
+ * remove an entry first.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] mp
+ * Memory Pool for which a Memory Region lkey must be returned.
+ *
+ * @return
+ * mr->lkey on success, (uint32_t)-1 on failure.
+ */
+static uint32_t
+txq_mp2mr(struct txq *txq, struct rte_mempool *mp)
+{
+ unsigned int i;
+ struct ibv_mr *mr;
+
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (unlikely(txq->mp2mr[i].mp == NULL)) {
+ /* Unknown MP, add a new MR for it. */
+ break;
+ }
+ if (txq->mp2mr[i].mp == mp) {
+ assert(txq->mp2mr[i].lkey != (uint32_t)-1);
+ assert(txq->mp2mr[i].mr->lkey == txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+ }
+ }
+ /* Add a new entry, register MR first. */
+ DEBUG("%p: discovered new memory pool %p", (void *)txq, (void *)mp);
+ mr = ibv_reg_mr(txq->priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (unlikely(mr == NULL)) {
+ DEBUG("%p: unable to configure MR, ibv_reg_mr() failed.",
+ (void *)txq);
+ return (uint32_t)-1;
+ }
+ if (unlikely(i == elemof(txq->mp2mr))) {
+ /* Table is full, remove oldest entry. */
+ DEBUG("%p: MR <-> MP table full, dropping oldest entry.",
+ (void *)txq);
+ --i;
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ memmove(&txq->mp2mr[0], &txq->mp2mr[1],
+ (sizeof(txq->mp2mr) - sizeof(txq->mp2mr[0])));
+ }
+ /* Store the new entry. */
+ txq->mp2mr[i].mp = mp;
+ txq->mp2mr[i].mr = mr;
+ txq->mp2mr[i].lkey = mr->lkey;
+ DEBUG("%p: new MR lkey for MP %p: 0x%08" PRIu32,
+ (void *)txq, (void *)mp, txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+}
+
+/**
+ * Copy scattered mbuf contents to a single linear buffer.
+ *
+ * @param[out] linear
+ * Linear output buffer.
+ * @param[in] buf
+ * Scattered input buffer.
+ *
+ * @return
+ * Number of bytes copied to the output buffer or 0 if not large enough.
+ */
+static unsigned int
+linearize_mbuf(linear_t *linear, struct rte_mbuf *buf)
+{
+ unsigned int size = 0;
+ unsigned int offset;
+
+ do {
+ unsigned int len = DATA_LEN(buf);
+
+ offset = size;
+ size += len;
+ if (unlikely(size > sizeof(*linear)))
+ return 0;
+ memcpy(&(*linear)[offset],
+ rte_pktmbuf_mtod(buf, uint8_t *),
+ len);
+ buf = NEXT(buf);
+ }
+ while (buf != NULL);
+ return size;
+}
+
+/**
+ * DPDK callback for TX.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+mlx4_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ mlx4_send_wr_t head;
+ mlx4_send_wr_t **wr_next = &head.next;
+ mlx4_send_wr_t *bad_wr;
+ unsigned int elts_head = txq->elts_head;
+ const unsigned int elts_tail = txq->elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ unsigned int i;
+ unsigned int max;
+ int err;
+
+ txq_complete(txq);
+ max = (elts_n - (elts_head - elts_tail));
+ if (max > elts_n)
+ max -= elts_n;
+ assert(max >= 1);
+ assert(max <= elts_n);
+ /* Always leave one free entry in the ring. */
+ --max;
+ if (max == 0)
+ return 0;
+ if (max > pkts_n)
+ max = pkts_n;
+ for (i = 0; (i != max); ++i) {
+ struct rte_mbuf *buf = pkts[i];
+ struct txq_elt *elt = &(*txq->elts)[elts_head];
+ mlx4_send_wr_t *wr = &elt->wr;
+ unsigned int segs = NB_SEGS(buf);
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ unsigned int sent_size = 0;
+#endif
+ unsigned int j;
+ int linearize = 0;
+
+ /* Clean up old buffer. */
+ if (likely(WR_ID(wr->wr_id).offset != 0)) {
+ struct rte_mbuf *tmp = (void *)
+ (elt->sges[0].addr - WR_ID(wr->wr_id).offset);
+
+ /* Faster than rte_pktmbuf_free(). */
+ do {
+ struct rte_mbuf *next = NEXT(tmp);
+
+ rte_pktmbuf_free_seg(tmp);
+ tmp = next;
+ }
+ while (tmp != NULL);
+ }
+#ifndef NDEBUG
+ /* For assert(). */
+ WR_ID(wr->wr_id).offset = 0;
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ /* Sanity checks, most of which are only relevant with
+ * debugging enabled. */
+ assert(WR_ID(wr->wr_id).id == elts_head);
+ assert(WR_ID(wr->wr_id).offset == 0);
+ assert(wr->next == NULL);
+ assert(wr->sg_list == &elt->sges[0]);
+ assert(wr->num_sge == 0);
+ assert(wr->opcode == IBV_WR_SEND);
+ /* When there are too many segments, extra segments are
+ * linearized in the last SGE. */
+ if (unlikely(segs > elemof(elt->sges))) {
+ segs = (elemof(elt->sges) - 1);
+ linearize = 1;
+ }
+ /* Set WR fields. */
+ assert(((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf) <= 0xffff);
+ WR_ID(wr->wr_id).offset =
+ ((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf);
+ wr->num_sge = segs;
+ /* Register segments as SGEs. */
+ for (j = 0; (j != segs); ++j) {
+ struct ibv_sge *sge = &elt->sges[j];
+ uint32_t lkey;
+
+ /* Retrieve Memory Region key for this memory pool. */
+ lkey = txq_mp2mr(txq, buf->pool);
+ if (unlikely(lkey == (uint32_t)-1)) {
+ /* MR does not exist. */
+ DEBUG("%p: unable to get MP <-> MR"
+ " association", (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf, char *);
+ if (txq->priv->vf)
+ rte_prefetch0((volatile void *)sge->addr);
+ sge->length = DATA_LEN(buf);
+ sge->lkey = lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += sge->length;
+#endif
+ buf = NEXT(buf);
+ }
+ /* If buf is not NULL here and is not going to be linearized,
+ * nb_segs is not valid. */
+ assert(j == segs);
+ assert((buf == NULL) || (linearize));
+ /* Linearize extra segments. */
+ if (linearize) {
+ struct ibv_sge *sge = &elt->sges[segs];
+ linear_t *linear = &(*txq->elts_linear)[elts_head];
+ unsigned int size = linearize_mbuf(linear, buf);
+
+ assert(segs == (elemof(elt->sges) - 1));
+ if (size == 0) {
+ /* Invalid packet. */
+ DEBUG("%p: packet too large to be linearized.",
+ (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* If MLX4_PMD_SGE_WR_N is 1, free mbuf immediately
+ * and clear offset from WR ID. */
+ if (elemof(elt->sges) == 1) {
+ do {
+ struct rte_mbuf *next = NEXT(buf);
+
+ rte_pktmbuf_free_seg(buf);
+ buf = next;
+ }
+ while (buf != NULL);
+ WR_ID(wr->wr_id).offset = 0;
+ }
+ /* Set WR fields and fill SGE with linear buffer. */
+ ++wr->num_sge;
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)&(*linear)[0];
+ sge->length = size;
+ sge->lkey = txq->mr_linear->lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += size;
+#endif
+ }
+ /* Link WRs together for ibv_post_send(). */
+ *wr_next = wr;
+ wr_next = &wr->next;
+#if MLX4_PMD_MAX_INLINE > 0
+ if (sent_size <= txq->max_inline)
+ wr->send_flags = IBV_SEND_INLINE;
+ else
+#endif
+ wr->send_flags = 0;
+ if (++elts_head >= elts_n)
+ elts_head = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent bytes counter. */
+ txq->stats.obytes += sent_size;
+#endif
+ }
+stop:
+ /* Take a shortcut if nothing must be sent. */
+ if (unlikely(i == 0))
+ return 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent packets counter. */
+ txq->stats.opackets += i;
+#endif
+ *wr_next = NULL;
+ /* The last WR is the only one asking for a completion event. */
+ containerof(wr_next, mlx4_send_wr_t, next)->
+ send_flags |= IBV_SEND_SIGNALED;
+ err = mlx4_post_send(txq->qp, head.next, &bad_wr);
+ if (unlikely(err)) {
+ unsigned int unsent = 0;
+
+ /* An error occured, completion event is lost. Fix counters. */
+ while (bad_wr != NULL) {
+ struct txq_elt *elt =
+ containerof(bad_wr, struct txq_elt, wr);
+ mlx4_send_wr_t *wr = &elt->wr;
+ mlx4_send_wr_t *next = wr->next;
+#if defined(MLX4_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
+ unsigned int j;
+#endif
+
+ assert(wr == bad_wr);
+ /* Clean up TX element without freeing it, caller
+ * should take care of this. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ for (j = 0; ((int)j < wr->num_sge); ++j)
+ txq->stats.obytes -= wr->sg_list[j].length;
+#endif
+ ++unsent;
+#ifndef NDEBUG
+ /* For assert(). */
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ bad_wr = next;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ txq->stats.opackets -= unsent;
+#endif
+ assert(i >= unsent);
+ i -= unsent;
+ /* "Unsend" remaining packets. */
+ elts_head -= unsent;
+ if (elts_head >= elts_n)
+ elts_head += elts_n;
+ assert(elts_head < elts_n);
+ DEBUG("%p: mlx4_post_send() failed, %u unprocessed WRs: %s",
+ (void *)txq, unsent,
+ ((err <= -1) ? "Internal error" : strerror(err)));
+ }
+ else
+ ++txq->elts_comp;
+ txq->elts_head = elts_head;
+ return i;
+}
+
+/**
+ * Configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_setup(struct rte_eth_dev *dev, struct txq *txq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq tmpl = {
+ .priv = priv,
+ .socket = socket
+ };
+ union {
+ struct ibv_qp_init_attr init;
+ struct ibv_exp_qp_attr mod;
+ } attr;
+ int ret = 0;
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of TX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ desc /= MLX4_PMD_SGE_WR_N;
+ /* MRs will be registered in mp2mr[] later. */
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+ attr.init = (struct ibv_qp_init_attr){
+ /* CQ to be associated with the send queue. */
+ .send_cq = tmpl.cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = tmpl.cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_send_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_send_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+#if MLX4_PMD_MAX_INLINE > 0
+ .max_inline_data = MLX4_PMD_MAX_INLINE,
+#endif
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ /* Do *NOT* enable this, completions events are managed per
+ * TX burst. */
+ .sq_sig_all = 0
+ };
+ tmpl.qp = ibv_create_qp(priv->pd, &attr.init);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+#if MLX4_PMD_MAX_INLINE > 0
+ /* ibv_create_qp() updates this value. */
+ tmpl.max_inline = attr.init.cap.max_inline_data;
+#endif
+ attr.mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod,
+ (IBV_EXP_QP_STATE | IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((ret = txq_alloc_elts(&tmpl, desc))) {
+ ERROR("%p: TXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod.qp_state = IBV_QPS_RTS;
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTS failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Clean up txq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old txq just in case", (void *)txq);
+ txq_cleanup(txq);
+ *txq = tmpl;
+ DEBUG("%p: txq updated with %p", (void *)txq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ txq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq *txq = (*priv->txqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->txqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->txqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (txq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)txq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->txqs)[idx] = NULL;
+ txq_cleanup(txq);
+ }
+ else {
+ txq = rte_calloc_socket("TXQ", 1, sizeof(*txq), 0, socket);
+ if (txq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = txq_setup(dev, txq, desc, socket, conf);
+ if (ret)
+ rte_free(txq);
+ else {
+ txq->stats.idx = idx;
+ DEBUG("%p: adding TX queue %p to list",
+ (void *)dev, (void *)txq);
+ (*priv->txqs)[idx] = txq;
+ /* Update send callback. */
+ dev->tx_pkt_burst = mlx4_tx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a TX queue.
+ *
+ * @param dpdk_txq
+ * Generic TX queue pointer.
+ */
+static void
+mlx4_tx_queue_release(void *dpdk_txq)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (txq == NULL)
+ return;
+ priv = txq->priv;
+ priv_lock(priv);
+ for (i = 0; (i != priv->txqs_n); ++i)
+ if ((*priv->txqs)[i] == txq) {
+ DEBUG("%p: removing TX queue %p from list",
+ (void *)priv->dev, (void *)txq);
+ (*priv->txqs)[i] = NULL;
+ break;
+ }
+ txq_cleanup(txq);
+ rte_free(txq);
+ priv_unlock(priv);
+}
+
+/* RX queues handling. */
+
+/**
+ * Allocate RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts_sp(struct rxq *rxq, unsigned int elts_n,
+ struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt_sp (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge (*sges)[(elemof(elt->sges))] = &elt->sges;
+
+ /* These two arrays must have the same size. */
+ assert(elemof(elt->sges) == elemof(elt->bufs));
+ /* Configure WR. */
+ wr->wr_id = i;
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = &(*sges)[0];
+ wr->num_sge = elemof(*sges);
+ /* For each SGE (segment). */
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct ibv_sge *sge = &(*sges)[j];
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ }
+ else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ elt->bufs[j] = buf;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ if (j == 0) {
+ /* The first SGE keeps its headroom. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf,
+ char *);
+ sge->length = (buf->buf_len -
+ RTE_PKTMBUF_HEADROOM);
+ }
+ else {
+ /* Subsequent SGEs lose theirs. */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ SET_DATA_OFF(buf, 0);
+ sge->addr = (uintptr_t)buf->buf_addr;
+ sge->length = buf->buf_len;
+ }
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u WRs (%zu segments)",
+ (void *)rxq, elts_n, (elts_n * elemof((*elts)[0].sges)));
+ rxq->elts_n = elts_n;
+ rxq->elts.sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts_sp(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt_sp (*elts)[elts_n] = rxq->elts.sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+}
+
+/**
+ * Allocate RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts(struct rxq *rxq, unsigned int elts_n, struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge *sge = &(*elts)[i].sge;
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ }
+ else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* Configure WR. Work request ID contains its own index in
+ * the elts array and the offset between SGE buffer header and
+ * its data. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)buf->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)buf);
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = sge;
+ wr->num_sge = 1;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ /* SGE keeps its headroom. */
+ sge->addr = (uintptr_t)
+ ((uint8_t *)buf->buf_addr + RTE_PKTMBUF_HEADROOM);
+ sge->length = (buf->buf_len - RTE_PKTMBUF_HEADROOM);
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ /* Make sure elts index and SGE mbuf pointer can be deduced
+ * from WR ID. */
+ if ((WR_ID(wr->wr_id).id != i) ||
+ ((void *)(sge->addr - WR_ID(wr->wr_id).offset) != buf)) {
+ ERROR("%p: cannot store index and offset in WR ID",
+ (void *)rxq);
+ sge->addr = 0;
+ rte_pktmbuf_free(buf);
+ ret = EOVERFLOW;
+ goto error;
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u single-segment WRs",
+ (void *)rxq, elts_n);
+ rxq->elts_n = elts_n;
+ rxq->elts.no_sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt (*elts)[elts_n] = rxq->elts.no_sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.no_sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)(elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+}
+
+/**
+ * Unregister a MAC address from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+rxq_mac_addr_del(struct rxq *rxq, unsigned int mac_index)
+{
+#if defined(NDEBUG) || defined(MLX4_COMPAT_VMWARE)
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+#endif
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(rxq->mac_configured, mac_index)) {
+ assert(rxq->mac_flow[mac_index] == NULL);
+ return;
+ }
+ DEBUG("%p: removing MAC address %02x:%02x:%02x:%02x:%02x:%02x"
+ " index %u",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ claim_zero(ibv_detach_mcast(rxq->qp, &gid, 0));
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+ return;
+ }
+#endif
+ assert(rxq->mac_flow[mac_index] != NULL);
+ claim_zero(ibv_exp_destroy_flow(rxq->mac_flow[mac_index]));
+ rxq->mac_flow[mac_index] = NULL;
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+}
+
+/**
+ * Unregister all MAC addresses from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_mac_addrs_del(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i)
+ rxq_mac_addr_del(rxq, i);
+}
+
+static int rxq_promiscuous_enable(struct rxq *);
+static void rxq_promiscuous_disable(struct rxq *);
+
+/**
+ * Register a MAC address in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addr_add(struct rxq *rxq, unsigned int mac_index)
+{
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+ unsigned int vlans = 0;
+ unsigned int specs = 0;
+ unsigned int i, j;
+ struct ibv_exp_flow *flow;
+
+ assert(mac_index < elemof(priv->mac));
+ if (BITFIELD_ISSET(rxq->mac_configured, mac_index))
+ rxq_mac_addr_del(rxq, mac_index);
+ /* Number of configured VLANs. */
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i)
+ if (priv->vlan_filter[i].enabled)
+ ++vlans;
+ specs = (vlans ? vlans : 1);
+
+ /* Allocate flow specification on the stack. */
+ struct ibv_exp_flow_attr data[1 +
+ (sizeof(struct ibv_exp_flow_spec_eth[specs]) /
+ sizeof(struct ibv_exp_flow_attr)) +
+ !!(sizeof(struct ibv_exp_flow_spec_eth[specs]) %
+ sizeof(struct ibv_exp_flow_attr))];
+
+ struct ibv_exp_flow_attr *attr = (void *)&data[0];
+ struct ibv_exp_flow_spec_eth *spec = (void *)&data[1];
+
+ /*
+ * No padding must be inserted by the compiler between attr and spec.
+ * This layout is expected by libibverbs.
+ */
+ assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
+ *attr = (struct ibv_exp_flow_attr){
+ .type = IBV_EXP_FLOW_ATTR_NORMAL,
+ .num_of_specs = specs,
+ .port = priv->port,
+ .flags = 0
+ };
+ *spec = (struct ibv_exp_flow_spec_eth){
+ .type = IBV_EXP_FLOW_SPEC_ETH,
+ .size = sizeof(*spec),
+ .val = {
+ .dst_mac = {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ },
+ .mask = {
+ .dst_mac = "\xff\xff\xff\xff\xff\xff",
+ .vlan_tag = (vlans ? 0xfff : 0)
+ }
+ };
+ /* Fill VLAN specifications. */
+ for (i = 0, j = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled)
+ continue;
+ assert(j != vlans);
+ if (j)
+ spec[j] = spec[0];
+ spec[j].val.vlan_tag = priv->vlan_filter[i].id;
+ ++j;
+ }
+ DEBUG("%p: adding MAC address %02x:%02x:%02x:%02x:%02x:%02x index %u"
+ " (%u VLAN(s) configured)",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index,
+ vlans);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ /* Call multicast attach with unicast mac to get traffic. */
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ errno = 0;
+ if (ibv_attach_mcast(rxq->qp, &gid, 0)) {
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+ }
+#endif
+ /* Create related flow. */
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, attr)) == NULL) {
+ int err = errno;
+ int disable = 0;
+
+ /* Flow creation failure is not fatal when in DMFS A0 mode.
+ * Ignore error if promiscuity is already enabled or can be
+ * enabled. */
+ if (priv->promisc_ok)
+ return 0;
+ if ((rxq->promisc_flow != NULL) ||
+ (disable = 1, rxq_promiscuous_enable(rxq) == 0)) {
+ if (disable)
+ rxq_promiscuous_disable(rxq);
+ WARN("cannot configure normal flow but promiscuous"
+ " mode is fine, assuming promiscuous optimization"
+ " is enabled"
+ " (options mlx4_core log_num_mgm_entry_size=-7)");
+ priv->promisc_ok = 1;
+ return 0;
+ }
+ errno = err;
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ assert(rxq->mac_flow[mac_index] == NULL);
+ rxq->mac_flow[mac_index] = flow;
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Register all MAC addresses in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addrs_add(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ ret = rxq_mac_addr_add(rxq, i);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ rxq_mac_addr_del(rxq, --i);
+ assert(ret > 0);
+ return ret;
+ }
+ return 0;
+}
+
+/**
+ * Unregister a MAC address.
+ *
+ * In RSS mode, the MAC address is unregistered from the parent queue,
+ * otherwise it is unregistered from each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+priv_mac_addr_del(struct priv *priv, unsigned int mac_index)
+{
+ unsigned int i;
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(priv->mac_configured, mac_index))
+ return;
+ if (priv->rss) {
+ rxq_mac_addr_del(&priv->rxq_parent, mac_index);
+ goto end;
+ }
+ for (i = 0; (i != priv->dev->data->nb_rx_queues); ++i)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+end:
+ BITFIELD_RESET(priv->mac_configured, mac_index);
+}
+
+/**
+ * Register a MAC address.
+ *
+ * In RSS mode, the MAC address is registered in the parent queue,
+ * otherwise it is registered in each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index to use.
+ * @param mac
+ * MAC address to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+priv_mac_addr_add(struct priv *priv, unsigned int mac_index,
+ const uint8_t (*mac)[ETHER_ADDR_LEN])
+{
+ unsigned int i;
+ int ret;
+
+ assert(mac_index < elemof(priv->mac));
+ /* First, make sure this address isn't already configured. */
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ /* Skip this index, it's going to be reconfigured. */
+ if (i == mac_index)
+ continue;
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ if (memcmp(priv->mac[i].addr_bytes, *mac, sizeof(*mac)))
+ continue;
+ /* Address already configured elsewhere, return with error. */
+ return EADDRINUSE;
+ }
+ if (BITFIELD_ISSET(priv->mac_configured, mac_index))
+ priv_mac_addr_del(priv, mac_index);
+ priv->mac[mac_index] = (struct ether_addr){
+ {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ };
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started) {
+#ifndef NDEBUG
+ /* Verify that all queues have this index disabled. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ assert(!BITFIELD_ISSET
+ ((*priv->rxqs)[i]->mac_configured, mac_index));
+ }
+#endif
+ goto end;
+ }
+ if (priv->rss) {
+ ret = rxq_mac_addr_add(&priv->rxq_parent, mac_index);
+ if (ret)
+ return ret;
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_mac_addr_add((*priv->rxqs)[i], mac_index);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[(--i)] != NULL)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+ return ret;
+ }
+end:
+ BITFIELD_SET(priv->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Enable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_allmulticast_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_MC_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ DEBUG("%p: enabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, &attr)) == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->allmulti_flow = flow;
+ DEBUG("%p: allmulticast mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_allmulticast_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ DEBUG("%p: disabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->allmulti_flow));
+ rxq->allmulti_flow = NULL;
+ DEBUG("%p: allmulticast mode disabled", (void *)rxq);
+}
+
+/**
+ * Enable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_promiscuous_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_ALL_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ if (rxq->priv->vf)
+ return 0;
+ DEBUG("%p: enabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, &attr)) == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->promisc_flow = flow;
+ DEBUG("%p: promiscuous mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_promiscuous_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ if (rxq->priv->vf)
+ return;
+ DEBUG("%p: disabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->promisc_flow));
+ rxq->promisc_flow = NULL;
+ DEBUG("%p: promiscuous mode disabled", (void *)rxq);
+}
+
+/**
+ * Clean up a RX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_cleanup(struct rxq *rxq)
+{
+ DEBUG("cleaning up %p", (void *)rxq);
+ if (rxq->sp)
+ rxq_free_elts_sp(rxq);
+ else
+ rxq_free_elts(rxq);
+ if (rxq->qp != NULL) {
+ rxq_promiscuous_disable(rxq);
+ rxq_allmulticast_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ claim_zero(ibv_destroy_qp(rxq->qp));
+ }
+ if (rxq->cq != NULL)
+ claim_zero(ibv_destroy_cq(rxq->cq));
+ if (rxq->mr != NULL)
+ claim_zero(ibv_dereg_mr(rxq->mr));
+ memset(rxq, 0, sizeof(*rxq));
+}
+
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n);
+
+/**
+ * DPDK callback for RX with scattered packets support.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst_sp(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(!rxq->sp))
+ return mlx4_rx_burst(dpdk_rxq, pkts, pkts_n);
+ if (unlikely(elts == NULL)) /* See RTE_DEV_CMD_SET_MTU. */
+ return 0;
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt_sp *elt = &(*elts)[wr_id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *pkt_buf = NULL; /* Buffer returned in pkts. */
+ struct rte_mbuf **pkt_buf_next = &pkt_buf;
+ unsigned int seg_headroom = RTE_PKTMBUF_HEADROOM;
+ unsigned int j = 0;
+
+ /* Sanity checks. */
+ assert(wr_id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == elt->sges);
+ assert(wr->num_sge == elemof(elt->sges));
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, wc->wr_id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Replace spent segments with new ones, concatenate and
+ * return them as pkt_buf.
+ */
+ while (1) {
+ struct ibv_sge *sge = &elt->sges[j];
+ struct rte_mbuf *seg = elt->bufs[j];
+ struct rte_mbuf *rep;
+ unsigned int seg_tailroom;
+
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, wr_id);
+ if (pkt_buf != NULL)
+ rte_pktmbuf_free(pkt_buf);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+#ifndef NDEBUG
+ /* Poison user-modifiable fields in rep. */
+ NEXT(rep) = (void *)((uintptr_t)-1);
+ SET_DATA_OFF(rep, 0xdead);
+ DATA_LEN(rep) = 0xd00d;
+ PKT_LEN(rep) = 0xdeadd00d;
+ NB_SEGS(rep) = 0x2a;
+ PORT(rep) = 0x2a;
+ rep->ol_flags = -1;
+#endif
+ assert(rep->buf_len == seg->buf_len);
+ assert(rep->buf_len == rxq->mb_len);
+ /* Reconfigure sge to use rep instead of seg. */
+ assert(sge->lkey == rxq->mr->lkey);
+ sge->addr = ((uintptr_t)rep->buf_addr + seg_headroom);
+ elt->bufs[j] = rep;
+ ++j;
+ /* Update pkt_buf if it's the first segment, or link
+ * seg to the previous one and update pkt_buf_next. */
+ *pkt_buf_next = seg;
+ pkt_buf_next = &NEXT(seg);
+ /* Update seg information. */
+ seg_tailroom = (seg->buf_len - seg_headroom);
+ assert(sge->length == seg_tailroom);
+ SET_DATA_OFF(seg, seg_headroom);
+ if (likely(len <= seg_tailroom)) {
+ /* Last segment. */
+ DATA_LEN(seg) = len;
+ PKT_LEN(seg) = len;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) ==
+ seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) ==
+ (seg_tailroom - len));
+ break;
+ }
+ DATA_LEN(seg) = seg_tailroom;
+ PKT_LEN(seg) = seg_tailroom;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) == seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) == 0);
+ /* Fix len and clear headroom for next segments. */
+ len -= seg_tailroom;
+ seg_headroom = 0;
+ }
+ /* Update head and tail segments. */
+ *pkt_buf_next = NULL;
+ assert(pkt_buf != NULL);
+ assert(j != 0);
+ NB_SEGS(pkt_buf) = j;
+ PORT(pkt_buf) = rxq->port_id;
+ PKT_LEN(pkt_buf) = wc->byte_len;
+ pkt_buf->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = pkt_buf;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+ repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu64 " (%p)",
+ (void *)rxq, wcs_n, wcs[0].wr_id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+/**
+ * DPDK callback for RX.
+ *
+ * The following function is the same as mlx4_rx_burst_sp(), except it doesn't
+ * manage scattered packets. Improves performance when MRU is lower than the
+ * size of the first segment.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(rxq->sp))
+ return mlx4_rx_burst_sp(dpdk_rxq, pkts, pkts_n);
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt *elt = &(*elts)[WR_ID(wr_id).id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *seg =
+ (void *)(elt->sge.addr - WR_ID(wr_id).offset);
+ struct rte_mbuf *rep;
+
+ /* Sanity checks. */
+ assert(WR_ID(wr_id).id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == &elt->sge);
+ assert(wr->num_sge == 1);
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, WR_ID(wr_id).id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, WR_ID(wr_id).id);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+
+ /* Reconfigure sge to use rep instead of seg. */
+ elt->sge.addr = (uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM;
+ assert(elt->sge.lkey == rxq->mr->lkey);
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)rep);
+ assert(WR_ID(wr->wr_id).id == WR_ID(wr_id).id);
+
+ /* Update seg information. */
+ SET_DATA_OFF(seg, RTE_PKTMBUF_HEADROOM);
+ NB_SEGS(seg) = 1;
+ PORT(seg) = rxq->port_id;
+ NEXT(seg) = NULL;
+ PKT_LEN(seg) = len;
+ DATA_LEN(seg) = len;
+ seg->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = seg;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+ repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu32 " (%p)",
+ (void *)rxq, wcs_n, WR_ID(wcs[0].wr_id).id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+#ifdef INLINE_RECV
+
+/**
+ * Allocate a Queue Pair in case inline receive is supported.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .max_inl_recv = priv->inl_recv_size,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .pd = priv->pd
+ };
+
+ attr.comp_mask = IBV_EXP_QP_INIT_ATTR_PD;
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#else /* INLINE_RECV */
+
+/**
+ * Allocate a Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET
+ };
+
+ return ibv_create_qp(priv->pd, &attr);
+}
+
+#endif /* INLINE_RECV */
+
+#ifdef RSS_SUPPORT
+
+/**
+ * Allocate a RSS Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ * @param parent
+ * If nonzero, create a parent QP, otherwise a child.
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp_rss(struct priv *priv, struct ibv_cq *cq, uint16_t desc,
+ int parent)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+#ifdef INLINE_RECV
+ .max_inl_recv = priv->inl_recv_size,
+#endif
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .comp_mask = (IBV_EXP_QP_INIT_ATTR_PD |
+ IBV_EXP_QP_INIT_ATTR_QPG),
+ .pd = priv->pd
+ };
+
+#ifdef INLINE_RECV
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+#endif
+ if (parent) {
+ attr.qpg.qpg_type = IBV_EXP_QPG_PARENT;
+ /* TSS isn't necessary. */
+ attr.qpg.parent_attrib.tss_child_count = 0;
+ attr.qpg.parent_attrib.rss_child_count = priv->rxqs_n;
+ DEBUG("initializing parent RSS queue");
+ }
+ else {
+ attr.qpg.qpg_type = IBV_EXP_QPG_CHILD_RX;
+ attr.qpg.qpg_parent = priv->rxq_parent.qp;
+ DEBUG("initializing child RSS queue");
+ }
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#endif /* RSS_SUPPORT */
+
+/**
+ * Reconfigure a RX queue with new parameters.
+ *
+ * rxq_rehash() does not allocate mbufs, which, if not done from the right
+ * thread (such as a control thread), may corrupt the pool.
+ * In case of failure, the queue is left untouched.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * RX queue pointer.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ struct rxq tmpl = *rxq;
+ unsigned int mbuf_n;
+ unsigned int desc_n;
+ struct rte_mbuf **pool;
+ unsigned int i, k;
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ int err;
+ int parent = (rxq == &priv->rxq_parent);
+
+ if (parent) {
+ ERROR("%p: cannot rehash parent queue %p",
+ (void *)dev, (void *)rxq);
+ return EINVAL;
+ }
+ DEBUG("%p: rehashing queue %p", (void *)dev, (void *)rxq);
+ /* Number of descriptors and mbufs currently allocated. */
+ desc_n = (tmpl.elts_n * (tmpl.sp ? MLX4_PMD_SGE_WR_N : 1));
+ mbuf_n = desc_n;
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc_n /= MLX4_PMD_SGE_WR_N;
+ }
+ else
+ tmpl.sp = 0;
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc_n);
+ /* If scatter mode is the same as before, nothing to do. */
+ if (tmpl.sp == rxq->sp) {
+ DEBUG("%p: nothing to do", (void *)dev);
+ return 0;
+ }
+ /* Remove attached flows if RSS is disabled (no parent queue). */
+ if (!priv->rss) {
+ rxq_allmulticast_disable(&tmpl);
+ rxq_promiscuous_disable(&tmpl);
+ rxq_mac_addrs_del(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* From now on, any failure will render the queue unusable.
+ * Reinitialize QP. */
+ mod = (struct ibv_exp_qp_attr){ .qp_state = IBV_QPS_RESET };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: cannot reset QP: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ if ((err = ibv_resize_cq(tmpl.cq, desc_n))) {
+ ERROR("%p: cannot resize CQ: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ };
+ /* Reconfigure flows. Do not care for errors. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(&tmpl);
+ if (priv->promisc)
+ rxq_promiscuous_enable(&tmpl);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* Allocate pool. */
+ pool = rte_malloc(__func__, (mbuf_n * sizeof(*pool)), 0);
+ if (pool == NULL) {
+ ERROR("%p: cannot allocate memory", (void *)dev);
+ return ENOBUFS;
+ }
+ /* Snatch mbufs from original queue. */
+ k = 0;
+ if (rxq->sp) {
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ unsigned int j;
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ assert(elt->bufs[j] != NULL);
+ pool[k++] = elt->bufs[j];
+ }
+ }
+ }
+ else {
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ pool[k++] = buf;
+ }
+ }
+ assert(k == mbuf_n);
+ tmpl.elts_n = 0;
+ tmpl.elts.sp = NULL;
+ assert((void *)&tmpl.elts.sp == (void *)&tmpl.elts.no_sp);
+ err = ((tmpl.sp) ?
+ rxq_alloc_elts_sp(&tmpl, desc_n, pool) :
+ rxq_alloc_elts(&tmpl, desc_n, pool));
+ if (err) {
+ ERROR("%p: cannot reallocate WRs, aborting", (void *)dev);
+ rte_free(pool);
+ assert(err > 0);
+ return err;
+ }
+ assert(tmpl.elts_n == desc_n);
+ assert(tmpl.elts.sp != NULL);
+ rte_free(pool);
+ /* Clean up original data. */
+ rxq->elts_n = 0;
+ rte_free(rxq->elts.sp);
+ rxq->elts.sp = NULL;
+ /* Post WRs. */
+ if ((err = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr))) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(err));
+ goto skip_rtr;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE)))
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(err));
+skip_rtr:
+ *rxq = tmpl;
+ assert(err >= 0);
+ return err;
+}
+
+/**
+ * Configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq tmpl = {
+ .priv = priv,
+ .mp = mp,
+ .socket = socket
+ };
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ struct rte_mbuf *buf;
+ int ret = 0;
+ int parent = (rxq == &priv->rxq_parent);
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ /*
+ * If this is a parent queue, hardware must support RSS and
+ * RSS must be enabled.
+ */
+ assert((!parent) || ((priv->hw_rss) && (priv->rss)));
+ if (parent) {
+ /* Even if unused, ibv_create_cq() requires at least one
+ * descriptor. */
+ desc = 1;
+ goto skip_mr;
+ }
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of RX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ /* Get mbuf length. */
+ buf = rte_pktmbuf_alloc(mp);
+ if (buf == NULL) {
+ ERROR("%p: unable to allocate mbuf", (void *)dev);
+ return ENOMEM;
+ }
+ tmpl.mb_len = buf->buf_len;
+ assert((rte_pktmbuf_headroom(buf) +
+ rte_pktmbuf_tailroom(buf)) == tmpl.mb_len);
+ assert(rte_pktmbuf_headroom(buf) == RTE_PKTMBUF_HEADROOM);
+ rte_pktmbuf_free(buf);
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc /= MLX4_PMD_SGE_WR_N;
+ }
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc);
+ /* Use the entire RX mempool as the memory region. */
+ tmpl.mr = ibv_reg_mr(priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE |
+ IBV_ACCESS_REMOTE_WRITE));
+ if (tmpl.mr == NULL) {
+ ret = EINVAL;
+ ERROR("%p: MR creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+skip_mr:
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+#ifdef RSS_SUPPORT
+ if (priv->rss)
+ tmpl.qp = rxq_setup_qp_rss(priv, tmpl.cq, desc, parent);
+ else
+#endif /* RSS_SUPPORT */
+ tmpl.qp = rxq_setup_qp(priv, tmpl.cq, desc);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((parent) || (!priv->rss)) {
+ /* Configure MAC and broadcast addresses. */
+ if ((ret = rxq_mac_addrs_add(&tmpl))) {
+ ERROR("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ }
+ /* Allocate descriptors for RX queues, except for the RSS parent. */
+ if (parent)
+ goto skip_alloc;
+ if (tmpl.sp)
+ ret = rxq_alloc_elts_sp(&tmpl, desc, NULL);
+ else
+ ret = rxq_alloc_elts(&tmpl, desc, NULL);
+ if (ret) {
+ ERROR("%p: RXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((ret = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr))) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(ret));
+ goto error;
+ }
+skip_alloc:
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Save port ID. */
+ tmpl.port_id = dev->data->port_id;
+ DEBUG("%p: RTE port ID: %u", (void *)rxq, tmpl.port_id);
+ /* Clean up rxq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old rxq just in case", (void *)rxq);
+ rxq_cleanup(rxq);
+ *rxq = tmpl;
+ DEBUG("%p: rxq updated with %p", (void *)rxq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ rxq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq *rxq = (*priv->rxqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->rxqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->rxqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (rxq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)rxq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->rxqs)[idx] = NULL;
+ rxq_cleanup(rxq);
+ }
+ else {
+ rxq = rte_calloc_socket("RXQ", 1, sizeof(*rxq), 0, socket);
+ if (rxq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = rxq_setup(dev, rxq, desc, socket, conf, mp);
+ if (ret)
+ rte_free(rxq);
+ else {
+ rxq->stats.idx = idx;
+ DEBUG("%p: adding RX queue %p to list",
+ (void *)dev, (void *)rxq);
+ (*priv->rxqs)[idx] = rxq;
+ /* Update receive callback. */
+ if (rxq->sp)
+ dev->rx_pkt_burst = mlx4_rx_burst_sp;
+ else
+ dev->rx_pkt_burst = mlx4_rx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a RX queue.
+ *
+ * @param dpdk_rxq
+ * Generic RX queue pointer.
+ */
+static void
+mlx4_rx_queue_release(void *dpdk_rxq)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (rxq == NULL)
+ return;
+ priv = rxq->priv;
+ priv_lock(priv);
+ assert(rxq != &priv->rxq_parent);
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] == rxq) {
+ DEBUG("%p: removing RX queue %p from list",
+ (void *)priv->dev, (void *)rxq);
+ (*priv->rxqs)[i] = NULL;
+ break;
+ }
+ rxq_cleanup(rxq);
+ rte_free(rxq);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * Simulate device start by attaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_start(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (priv->started) {
+ priv_unlock(priv);
+ return 0;
+ }
+ DEBUG("%p: attaching configured flows to all RX queues", (void *)dev);
+ priv->started = 1;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ }
+ else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ int ret;
+
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ if (((ret = rxq_mac_addrs_add(rxq)) == 0) &&
+ ((!priv->promisc) ||
+ ((ret = rxq_promiscuous_enable(rxq)) == 0)) &&
+ ((!priv->allmulti) ||
+ ((ret = rxq_allmulticast_enable(rxq)) == 0)))
+ continue;
+ WARN("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ /* Rollback. */
+ while (i != 0)
+ if ((rxq = (*priv->rxqs)[--i]) != NULL) {
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ priv->started = 0;
+ return -ret;
+ }
+ while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+ return 0;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * Simulate device stop by detaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_stop(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (!priv->started) {
+ priv_unlock(priv);
+ return;
+ }
+ DEBUG("%p: detaching flows from all RX queues", (void *)dev);
+ priv->started = 0;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ }
+ else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+}
+
+/**
+ * Dummy DPDK callback for TX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_txq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * Dummy DPDK callback for RX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+removed_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_rxq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * Destroy all queues and objects, free memory.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_close(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ void *tmp;
+ unsigned int i;
+
+ priv_lock(priv);
+ DEBUG("%p: closing device \"%s\"",
+ (void *)dev,
+ ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
+ /* Prevent crashes when queues are still in use. This is unfortunately
+ * still required for DPDK 1.3 because some programs (such as testpmd)
+ * never release them before closing the device. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ dev->tx_pkt_burst = removed_tx_burst;
+ if (priv->rxqs != NULL) {
+ /* XXX race condition if mlx4_rx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ tmp = (*priv->rxqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->rxqs)[i] = NULL;
+ rxq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->rxqs_n = 0;
+ priv->rxqs = NULL;
+ }
+ if (priv->txqs != NULL) {
+ /* XXX race condition if mlx4_tx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ tmp = (*priv->txqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->txqs)[i] = NULL;
+ txq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->txqs_n = 0;
+ priv->txqs = NULL;
+ }
+ if (priv->rss)
+ rxq_cleanup(&priv->rxq_parent);
+ if (priv->pd != NULL) {
+ assert(priv->ctx != NULL);
+ claim_zero(ibv_dealloc_pd(priv->pd));
+ claim_zero(ibv_close_device(priv->ctx));
+ }
+ else
+ assert(priv->ctx == NULL);
+ priv_unlock(priv);
+ memset(priv, 0, sizeof(*priv));
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+static void
+mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int max;
+
+ priv_lock(priv);
+ /* FIXME: we should ask the device for these values. */
+ info->min_rx_bufsize = 32;
+ info->max_rx_pktlen = 65536;
+ /*
+ * Since we need one CQ per QP, the limit is the minimum number
+ * between the two values.
+ */
+ max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
+ priv->device_attr.max_qp : priv->device_attr.max_cq);
+ /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
+ if (max >= 65535) {
+ max = 65535;
+ }
+ info->max_rx_queues = max;
+ info->max_tx_queues = max;
+ info->max_mac_addrs = elemof(priv->mac);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to get device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] stats
+ * Stats structure output buffer.
+ */
+static void
+mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rte_eth_stats tmp = { .ipackets = 0 };
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ /* Add software counters. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+
+ if (rxq == NULL)
+ continue;
+ idx = rxq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_ipackets[idx] += rxq->stats.ipackets;
+ tmp.q_ibytes[idx] += rxq->stats.ibytes;
+#endif
+ tmp.q_errors[idx] += (rxq->stats.idropped +
+ rxq->stats.rx_nombuf);
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.ipackets += rxq->stats.ipackets;
+ tmp.ibytes += rxq->stats.ibytes;
+#endif
+ tmp.ierrors += rxq->stats.idropped;
+ tmp.rx_nombuf += rxq->stats.rx_nombuf;
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ struct txq *txq = (*priv->txqs)[i];
+
+ if (txq == NULL)
+ continue;
+ idx = txq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_opackets[idx] += txq->stats.opackets;
+ tmp.q_obytes[idx] += txq->stats.obytes;
+#endif
+ tmp.q_errors[idx] += txq->stats.odropped;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.opackets += txq->stats.opackets;
+ tmp.obytes += txq->stats.obytes;
+#endif
+ tmp.oerrors += txq->stats.odropped;
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: retrieve and add hardware counters. */
+#endif
+ *stats = tmp;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to clear device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_stats_reset(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->rxqs)[i]->stats =
+ (struct mlx4_rxq_stats){ .idx = idx };
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ if ((*priv->txqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->txqs)[i]->stats =
+ (struct mlx4_txq_stats){ .idx = idx };
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: reset hardware counters. */
+#endif
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to remove a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param index
+ * MAC address index.
+ */
+static void
+mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ priv_lock(priv);
+ DEBUG("%p: removing MAC address from index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to remove the broadcast address, this one is special. */
+ if (!memcmp(priv->mac[index].addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_del(priv, index);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to add a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param mac_addr
+ * MAC address to register.
+ * @param index
+ * MAC address index.
+ * @param vmdq
+ * VMDq pool index to associate address with (ignored).
+ */
+static void
+mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, uint32_t vmdq)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ (void)vmdq;
+ priv_lock(priv);
+ DEBUG("%p: adding MAC address at index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to add the broadcast address, this one is special. */
+ if (!memcmp(mac_addr->addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_add(priv, index,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac_addr->addr_bytes);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_promiscuous_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_promiscuous_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->promisc = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_promiscuous_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+end:
+ priv->promisc = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_allmulticast_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_allmulticast_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->allmulti = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_allmulticast_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+end:
+ priv->allmulti = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to retrieve physical link information (unlocked version).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ibv_port_attr port_attr;
+ static const uint8_t width_mult[] = {
+ /* Multiplier values taken from devinfo.c in libibverbs. */
+ 0, 1, 4, 0, 8, 0, 0, 0, 12, 0
+ };
+
+ (void)wait_to_complete;
+ if ((errno = ibv_query_port(priv->ctx, priv->port, &port_attr))) {
+ WARN("port query failed: %s", strerror(errno));
+ return -1;
+ }
+ dev->data->dev_link = (struct rte_eth_link){
+ .link_speed = (ibv_rate_to_mbps(mult_to_ibv_rate
+ (port_attr.active_speed)) *
+ width_mult[(port_attr.active_width %
+ sizeof(width_mult))]),
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = (port_attr.state == IBV_PORT_ACTIVE)
+ };
+ if (memcmp(&port_attr, &priv->port_attr, sizeof(port_attr))) {
+ /* Link status changed. */
+ priv->port_attr = port_attr;
+ return 0;
+ }
+ /* Link status is still the same. */
+ return -1;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = mlx4_link_update_unlocked(dev, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
+ * received). Use this as a hint to enable/disable scattered packets support
+ * and improve performance when not needed.
+ * Since failure is not an option, reconfiguring queues on the fly is not
+ * recommended.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param in_mtu
+ * New MTU.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret = 0;
+ unsigned int i;
+ uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
+ mlx4_rx_burst;
+
+ priv_lock(priv);
+ /* Set kernel interface MTU first. */
+ if (priv_set_mtu(priv, mtu)) {
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
+ goto out;
+ }
+ else
+ DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ priv->mtu = mtu;
+ /* Temporarily replace RX handler with a fake one, assuming it has not
+ * been copied elsewhere. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ /* Make sure everyone has left mlx4_rx_burst() and uses
+ * removed_rx_burst() instead. */
+ rte_wmb();
+ usleep(1000);
+ /* Reconfigure each RX queue. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+ unsigned int max_frame_len;
+ int sp;
+
+ if (rxq == NULL)
+ continue;
+ /* Calculate new maximum frame length according to MTU and
+ * toggle scattered support (sp) if necessary. */
+ max_frame_len = (priv->mtu + ETHER_HDR_LEN +
+ (ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
+ sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
+ /* Provide new values to rxq_setup(). */
+ dev->data->dev_conf.rxmode.jumbo_frame = sp;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
+ if ((ret = rxq_rehash(dev, rxq))) {
+ /* Force SP RX if that queue requires it and abort. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ break;
+ }
+ /* Reenable non-RSS queue attributes. No need to check
+ * for errors at this stage. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(rxq);
+ if (priv->promisc)
+ rxq_promiscuous_enable(rxq);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(rxq);
+ }
+ /* Scattered burst function takes priority. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ }
+ /* Burst functions can now be called again. */
+ rte_wmb();
+ dev->rx_pkt_burst = rx_func;
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ * Flow control output buffer.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_GPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+
+ fc_conf->autoneg = ethpause.autoneg;
+ if (ethpause.rx_pause && ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (ethpause.rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ * Flow control parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_SPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ ethpause.autoneg = fc_conf->autoneg;
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ ethpause.rx_pause = 1;
+ else
+ ethpause.rx_pause = 0;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ ethpause.tx_pause = 1;
+ else
+ ethpause.tx_pause = 0;
+
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * Configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int j = -1;
+
+ DEBUG("%p: %s VLAN filter ID %" PRIu16,
+ (void *)dev, (on ? "enable" : "disable"), vlan_id);
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled) {
+ /* Unused index, remember it. */
+ j = i;
+ continue;
+ }
+ if (priv->vlan_filter[i].id != vlan_id)
+ continue;
+ /* This VLAN ID is already known, use its index. */
+ j = i;
+ break;
+ }
+ /* Check if there's room for another VLAN filter. */
+ if (j == (unsigned int)-1)
+ return ENOMEM;
+ /*
+ * VLAN filters apply to all configured MAC addresses, flow
+ * specifications must be reconfigured accordingly.
+ */
+ priv->vlan_filter[j].id = vlan_id;
+ if ((on) && (!priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is disabled, enable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 1;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ }
+ else if ((!on) && (priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is enabled, disable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 0;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * DPDK callback to configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = vlan_filter_set(dev, vlan_id, on);
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+static struct eth_dev_ops mlx4_dev_ops = {
+ .dev_configure = mlx4_dev_configure,
+ .dev_start = mlx4_dev_start,
+ .dev_stop = mlx4_dev_stop,
+ .dev_close = mlx4_dev_close,
+ .promiscuous_enable = mlx4_promiscuous_enable,
+ .promiscuous_disable = mlx4_promiscuous_disable,
+ .allmulticast_enable = mlx4_allmulticast_enable,
+ .allmulticast_disable = mlx4_allmulticast_disable,
+ .link_update = mlx4_link_update,
+ .stats_get = mlx4_stats_get,
+ .stats_reset = mlx4_stats_reset,
+ .queue_stats_mapping_set = NULL,
+ .dev_infos_get = mlx4_dev_infos_get,
+ .vlan_filter_set = mlx4_vlan_filter_set,
+ .vlan_tpid_set = NULL,
+ .vlan_strip_queue_set = NULL,
+ .vlan_offload_set = NULL,
+ .rx_queue_setup = mlx4_rx_queue_setup,
+ .tx_queue_setup = mlx4_tx_queue_setup,
+ .rx_queue_release = mlx4_rx_queue_release,
+ .tx_queue_release = mlx4_tx_queue_release,
+ .dev_led_on = NULL,
+ .dev_led_off = NULL,
+ .flow_ctrl_get = mlx4_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx4_dev_set_flow_ctrl,
+ .priority_flow_ctrl_set = NULL,
+ .mac_addr_remove = mlx4_mac_addr_remove,
+ .mac_addr_add = mlx4_mac_addr_add,
+ .mtu_set = mlx4_dev_set_mtu,
+ .fdir_add_signature_filter = NULL,
+ .fdir_update_signature_filter = NULL,
+ .fdir_remove_signature_filter = NULL,
+ .fdir_add_perfect_filter = NULL,
+ .fdir_update_perfect_filter = NULL,
+ .fdir_remove_perfect_filter = NULL,
+ .fdir_set_masks = NULL
+};
+
+/**
+ * Get PCI information from struct ibv_device.
+ *
+ * @param device
+ * Pointer to Ethernet device structure.
+ * @param[out] pci_addr
+ * PCI bus address output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+mlx4_ibv_device_to_pci_addr(const struct ibv_device *device,
+ struct rte_pci_addr *pci_addr)
+{
+ FILE *file;
+ char line[32];
+ MKSTR(path, "%s/device/uevent", device->ibdev_path);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ while (fgets(line, sizeof(line), file) == line) {
+ size_t len = strlen(line);
+ int ret;
+
+ /* Truncate long lines. */
+ if (len == (sizeof(line) - 1))
+ while (line[(len - 1)] != '\n') {
+ ret = fgetc(file);
+ if (ret == EOF)
+ break;
+ line[(len - 1)] = ret;
+ }
+ /* Extract information. */
+ if (sscanf(line,
+ "PCI_SLOT_NAME="
+ "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+ &pci_addr->domain,
+ &pci_addr->bus,
+ &pci_addr->devid,
+ &pci_addr->function) == 4) {
+ ret = 0;
+ break;
+ }
+ }
+ fclose(file);
+ return 0;
+}
+
+/**
+ * Derive MAC address from port GID.
+ *
+ * @param[out] mac
+ * MAC address output buffer.
+ * @param port
+ * Physical port number.
+ * @param[in] gid
+ * Port GID.
+ */
+static void
+mac_from_gid(uint8_t (*mac)[ETHER_ADDR_LEN], uint32_t port, uint8_t *gid)
+{
+ memcpy(&(*mac)[0], gid + 8, 3);
+ memcpy(&(*mac)[3], gid + 13, 3);
+ if (port == 1)
+ (*mac)[0] ^= 2;
+}
+
+/* Support up to 32 adapters. */
+static struct {
+ struct rte_pci_addr pci_addr; /* associated PCI address */
+ uint32_t ports; /* physical ports bitfield. */
+} mlx4_dev[32];
+
+/**
+ * Get device index in mlx4_dev[] from PCI bus address.
+ *
+ * @param[in] pci_addr
+ * PCI bus address to look for.
+ *
+ * @return
+ * mlx4_dev[] index on success, -1 on failure.
+ */
+static int
+mlx4_dev_idx(struct rte_pci_addr *pci_addr)
+{
+ unsigned int i;
+ int ret = -1;
+
+ assert(pci_addr != NULL);
+ for (i = 0; (i != elemof(mlx4_dev)); ++i) {
+ if ((mlx4_dev[i].pci_addr.domain == pci_addr->domain) &&
+ (mlx4_dev[i].pci_addr.bus == pci_addr->bus) &&
+ (mlx4_dev[i].pci_addr.devid == pci_addr->devid) &&
+ (mlx4_dev[i].pci_addr.function == pci_addr->function))
+ return i;
+ if ((mlx4_dev[i].ports == 0) && (ret == -1))
+ ret = i;
+ }
+ return ret;
+}
+
+/**
+ * Retrieve integer value from environment variable.
+ *
+ * @param[in] name
+ * Environment variable name.
+ *
+ * @return
+ * Integer value, 0 if the variable is not set.
+ */
+static int
+mlx4_getenv_int(const char *name)
+{
+ const char *val = getenv(name);
+
+ if (val == NULL)
+ return 0;
+ return atoi(val);
+}
+
+static struct eth_driver mlx4_driver;
+
+/**
+ * DPDK callback to register a PCI device.
+ *
+ * This function creates an Ethernet device for each port of a given
+ * PCI device.
+ *
+ * @param[in] pci_drv
+ * PCI driver structure (mlx4_driver).
+ * @param[in] pci_dev
+ * PCI device information.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_pci_devinit(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+{
+ struct ibv_device **list;
+ struct ibv_device *ibv_dev;
+ int err = 0;
+ struct ibv_context *attr_ctx = NULL;
+ struct ibv_device_attr device_attr;
+ unsigned int vf;
+ int idx;
+ int i;
+
+ (void)pci_drv;
+ assert(pci_drv == &mlx4_driver.pci_drv);
+ /* Get mlx4_dev[] index. */
+ idx = mlx4_dev_idx(&pci_dev->addr);
+ if (idx == -1) {
+ ERROR("this driver cannot support any more adapters");
+ return -ENOMEM;
+ }
+ DEBUG("using driver device index %d", idx);
+
+ /* Save PCI address. */
+ mlx4_dev[idx].pci_addr = pci_dev->addr;
+ list = ibv_get_device_list(&i);
+ if (list == NULL) {
+ assert(errno);
+ return -errno;
+ }
+ assert(i >= 0);
+ /*
+ * For each listed device, check related sysfs entry against
+ * the provided PCI ID.
+ */
+ while (i != 0) {
+ struct rte_pci_addr pci_addr;
+
+ --i;
+ DEBUG("checking device \"%s\"", list[i]->name);
+ if (mlx4_ibv_device_to_pci_addr(list[i], &pci_addr))
+ continue;
+ if ((pci_dev->addr.domain != pci_addr.domain) ||
+ (pci_dev->addr.bus != pci_addr.bus) ||
+ (pci_dev->addr.devid != pci_addr.devid) ||
+ (pci_dev->addr.function != pci_addr.function))
+ continue;
+ vf = (pci_dev->id.device_id ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF);
+ INFO("PCI information matches, using device \"%s\" (VF: %s)",
+ list[i]->name, (vf ? "true" : "false"));
+ attr_ctx = ibv_open_device(list[i]);
+ err = errno;
+ break;
+ }
+ if (attr_ctx == NULL) {
+ if (err == 0)
+ err = ENODEV;
+ ibv_free_device_list(list);
+ assert(err > 0);
+ return -err;
+ }
+ ibv_dev = list[i];
+
+ DEBUG("device opened");
+ if (ibv_query_device(attr_ctx, &device_attr))
+ goto error;
+ INFO("%u port(s) detected", device_attr.phys_port_cnt);
+
+ for (i = 0; i < device_attr.phys_port_cnt; i++) {
+ uint32_t port = i + 1; /* ports are indexed from one */
+ uint32_t test = (1 << i);
+ struct ibv_context *ctx = NULL;
+ struct ibv_port_attr port_attr;
+ struct ibv_pd *pd = NULL;
+ struct priv *priv = NULL;
+ struct rte_eth_dev *eth_dev;
+#if defined(INLINE_RECV) || defined(RSS_SUPPORT)
+ struct ibv_exp_device_attr exp_device_attr;
+#endif
+ struct ether_addr mac;
+ union ibv_gid temp_gid;
+
+#ifdef RSS_SUPPORT
+ exp_device_attr.comp_mask =
+ (IBV_EXP_DEVICE_ATTR_EXP_CAP_FLAGS |
+ IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ);
+#endif /* RSS_SUPPORT */
+
+ DEBUG("using port %u (%08" PRIx32 ")", port, test);
+
+ ctx = ibv_open_device(ibv_dev);
+ if (ctx == NULL)
+ goto port_error;
+
+ /* Check port status. */
+ if ((err = ibv_query_port(ctx, port, &port_attr))) {
+ ERROR("port query failed: %s", strerror(err));
+ goto port_error;
+ }
+ if (port_attr.state != IBV_PORT_ACTIVE)
+ WARN("bad state for port %d: \"%s\" (%d)",
+ port, ibv_port_state_str(port_attr.state),
+ port_attr.state);
+
+ /* Allocate protection domain. */
+ pd = ibv_alloc_pd(ctx);
+ if (pd == NULL) {
+ ERROR("PD allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ mlx4_dev[idx].ports |= test;
+
+ /* from rte_ethdev.c */
+ priv = rte_zmalloc("ethdev private structure",
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ ERROR("priv allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ priv->ctx = ctx;
+ priv->device_attr = device_attr;
+ priv->port_attr = port_attr;
+ priv->port = port;
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+#ifdef RSS_SUPPORT
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("experimental ibv_exp_query_device");
+ goto port_error;
+ }
+ if ((exp_device_attr.exp_device_cap_flags & IBV_EXP_DEVICE_QPG) &&
+ (exp_device_attr.exp_device_cap_flags & IBV_EXP_DEVICE_UD_RSS) &&
+ (exp_device_attr.comp_mask & IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ) &&
+ (exp_device_attr.max_rss_tbl_sz > 0)) {
+ priv->hw_qpg = 1;
+ priv->hw_rss = 1;
+ priv->max_rss_tbl_sz = exp_device_attr.max_rss_tbl_sz;
+ }
+ else {
+ priv->hw_qpg = 0;
+ priv->hw_rss = 0;
+ priv->max_rss_tbl_sz = 0;
+ }
+ priv->hw_tss = !!(exp_device_attr.exp_device_cap_flags &
+ IBV_EXP_DEVICE_UD_TSS);
+ DEBUG("device flags: %s%s%s",
+ (priv->hw_qpg ? "IBV_DEVICE_QPG " : ""),
+ (priv->hw_tss ? "IBV_DEVICE_TSS " : ""),
+ (priv->hw_rss ? "IBV_DEVICE_RSS " : ""));
+ if (priv->hw_rss)
+ DEBUG("maximum RSS indirection table size: %u",
+ exp_device_attr.max_rss_tbl_sz);
+#endif /* RSS_SUPPORT */
+
+#ifdef INLINE_RECV
+ priv->inl_recv_size = mlx4_getenv_int("MLX4_INLINE_RECV_SIZE");
+
+ if (priv->inl_recv_size) {
+ exp_device_attr.comp_mask = IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ;
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("Couldn't query device for inline-receive capabilities.");
+ priv->inl_recv_size = 0;
+ } else {
+ if ((unsigned int)exp_device_attr.inline_recv_sz < priv->inl_recv_size) {
+ INFO("Max inline-receive(%d) < Requested inline-receive(%u)",
+ exp_device_attr.inline_recv_sz, priv->inl_recv_size);
+ priv->inl_recv_size = exp_device_attr.inline_recv_sz;
+ }
+ }
+ INFO("Set inline receive size to %u", priv->inl_recv_size);
+ }
+#endif /* INLINE_RECV */
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (mlx4_getenv_int("MLX4_COMPAT_VMWARE"))
+ priv->vmware = 1;
+#else /* MLX4_COMPAT_VMWARE */
+ (void)mlx4_getenv_int;
+#endif /* MLX4_COMPAT_VMWARE */
+ priv->vf = vf;
+ if (ibv_query_gid(ctx, port, 0, &temp_gid)) {
+ ERROR("ibv_query_gid() failure");
+ goto port_error;
+ }
+ /* Configure the first MAC address by default. */
+ mac_from_gid(&mac.addr_bytes, port, temp_gid.raw);
+ INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ priv->port,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ /* Register MAC and broadcast addresses. */
+ claim_zero(priv_mac_addr_add(priv, 0,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac.addr_bytes));
+ claim_zero(priv_mac_addr_add(priv, 1,
+ &(const uint8_t [ETHER_ADDR_LEN])
+ { "\xff\xff\xff\xff\xff\xff" }));
+#ifndef NDEBUG
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (priv_get_ifname(priv, &ifname) == 0)
+ DEBUG("port %u ifname is \"%s\"", priv->port, ifname);
+ else
+ DEBUG("port %u ifname is unknown", priv->port);
+ }
+#endif
+ /* Get actual MTU if possible. */
+ priv_get_mtu(priv, &priv->mtu);
+ DEBUG("port %u MTU is %u", priv->port, priv->mtu);
+
+ /* from rte_ethdev.c */
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ {
+ char name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(name, sizeof(name), "%s port %u",
+ ibv_get_device_name(ibv_dev), port);
+ eth_dev = rte_eth_dev_allocate(name);
+ }
+#else
+ eth_dev = rte_eth_dev_allocate();
+#endif
+ if (eth_dev == NULL) {
+ ERROR("can not allocate rte ethdev");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ eth_dev->data->dev_private = priv;
+ eth_dev->pci_dev = pci_dev;
+ eth_dev->driver = &mlx4_driver;
+ eth_dev->data->rx_mbuf_alloc_failed = 0;
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ eth_dev->data->mtu = ETHER_MTU;
+#else
+ eth_dev->data->max_frame_size = ETHER_MAX_LEN;
+#endif
+
+ priv->dev = eth_dev;
+ eth_dev->dev_ops = &mlx4_dev_ops;
+ eth_dev->data->mac_addrs = priv->mac;
+
+ /* Bring Ethernet device up. */
+ DEBUG("forcing Ethernet interface up");
+ priv_set_flags(priv, ~IFF_UP, IFF_UP);
+ continue;
+
+port_error:
+ if (priv)
+ rte_free(priv);
+ if (pd)
+ claim_zero(ibv_dealloc_pd(pd));
+ if (ctx)
+ claim_zero(ibv_close_device(ctx));
+ break;
+ }
+
+ /*
+ * XXX if something went wrong in the loop above, there is a resource
+ * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
+ * long as the dpdk does not provide a way to deallocate a ethdev and a
+ * way to enumerate the registered ethdevs to free the previous ones.
+ */
+
+ /* no port found, complain */
+ if (!mlx4_dev[idx].ports) {
+ err = ENODEV;
+ goto error;
+ }
+
+error:
+ if (attr_ctx)
+ claim_zero(ibv_close_device(attr_ctx));
+ if (list)
+ ibv_free_device_list(list);
+ assert(err >= 0);
+ return -err;
+}
+
+static struct rte_pci_id mlx4_pci_id_map[] = {
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3VF,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = 0
+ }
+};
+
+static struct eth_driver mlx4_driver = {
+ .pci_drv = {
+ .name = MLX4_DRIVER_NAME,
+ .id_table = mlx4_pci_id_map,
+ .devinit = mlx4_pci_devinit,
+ },
+ .dev_private_size = sizeof(struct priv)
+};
+
+/**
+ * Driver initialization routine.
+ */
+static int
+rte_mlx4_pmd_init(const char *name, const char *args)
+{
+ (void)name;
+ (void)args;
+ rte_eal_pci_register(&mlx4_driver.pci_drv);
+ return 0;
+}
+
+static struct rte_driver rte_mlx4_driver = {
+ .type = PMD_PDEV,
+ .name = MLX4_DRIVER_NAME,
+ .init = rte_mlx4_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_mlx4_driver)
diff --git a/lib/librte_pmd_mlx4/mlx4.h b/lib/librte_pmd_mlx4/mlx4.h
new file mode 100644
index 0000000..4743a64
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.h
@@ -0,0 +1,166 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012-2015 6WIND S.A.
+ * Copyright(c) 2012 Mellanox.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_PMD_MLX4_H_
+#define RTE_PMD_MLX4_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <limits.h>
+
+/*
+ * Maximum number of simultaneous MAC addresses supported.
+ *
+ * According to ConnectX's Programmer Reference Manual:
+ * The L2 Address Match is implemented by comparing a MAC/VLAN combination
+ * of 128 MAC addresses and 127 VLAN values, comprising 128x127 possible
+ * L2 addresses.
+ */
+#define MLX4_MAX_MAC_ADDRESSES 128
+
+/* Maximum number of simultaneous VLAN filters supported. See above. */
+#define MLX4_MAX_VLAN_IDS 127
+
+/* Maximum number of Scatter/Gather Elements per Work Request. */
+#ifndef MLX4_PMD_SGE_WR_N
+#define MLX4_PMD_SGE_WR_N 4
+#endif
+
+/* Maximum size for inline data. */
+#ifndef MLX4_PMD_MAX_INLINE
+#define MLX4_PMD_MAX_INLINE 0
+#endif
+
+/*
+ * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
+ * from which buffers are to be transmitted will have to be mapped by this
+ * driver to their own Memory Region (MR). This is a slow operation.
+ *
+ * This value is always 1 for RX queues.
+ */
+#ifndef MLX4_PMD_TX_MP_CACHE
+#define MLX4_PMD_TX_MP_CACHE 8
+#endif
+
+/*
+ * If defined, only use software counters. The PMD will never ask the hardware
+ * for these, and many of them won't be available.
+ */
+#ifndef MLX4_PMD_SOFT_COUNTERS
+#define MLX4_PMD_SOFT_COUNTERS 1
+#endif
+
+/*
+ * If defined, enable VMware compatibility code. It also requires the
+ * environment variable MLX4_COMPAT_VMWARE set to a nonzero value at runtime.
+ */
+#ifndef MLX4_COMPAT_VMWARE
+#define MLX4_COMPAT_VMWARE 1
+#endif
+
+enum {
+ PCI_VENDOR_ID_MELLANOX = 0x15b3,
+};
+
+enum {
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3 = 0x1003,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF = 0x1004,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO = 0x1007,
+};
+
+#define MLX4_DRIVER_NAME "librte_pmd_mlx4"
+
+/* Bit-field manipulation. */
+#define BITFIELD_DECLARE(bf, type, size) \
+ type bf[(((size_t)(size) / (sizeof(type) * CHAR_BIT)) + \
+ !!((size_t)(size) % (sizeof(type) * CHAR_BIT)))]
+#define BITFIELD_DEFINE(bf, type, size) \
+ BITFIELD_DECLARE((bf), type, (size)) = { 0 }
+#define BITFIELD_SET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] |= \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_RESET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] &= \
+ ~((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_ISSET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ !!(((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] & \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT))))))
+
+/* Number of elements in array. */
+#define elemof(a) (sizeof(a) / sizeof((a)[0]))
+
+/* Cast pointer p to structure member m to its parent structure of type t. */
+#define containerof(p, t, m) ((t *)((uint8_t *)(p) - offsetof(t, m)))
+
+/* Branch prediction helpers. */
+#ifndef likely
+#define likely(c) __builtin_expect(!!(c), 1)
+#endif
+#ifndef unlikely
+#define unlikely(c) __builtin_expect(!!(c), 0)
+#endif
+
+/* Debugging */
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ fflush(stderr), \
+ (void)0)
+/*
+ * Save/restore errno around DEBUG__().
+ * XXX somewhat undefined behavior, but works.
+ */
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define claim_zero(...) assert((__VA_ARGS__) == 0)
+#define claim_nonzero(...) assert((__VA_ARGS__) != 0)
+#define claim_positive(...) assert((__VA_ARGS__) >= 0)
+#else /* NDEBUG */
+/* No-ops. */
+#define DEBUG(...) (void)0
+#define claim_zero(...) (__VA_ARGS__)
+#define claim_nonzero(...) (__VA_ARGS__)
+#define claim_positive(...) (__VA_ARGS__)
+#endif /* NDEBUG */
+
+#endif /* RTE_PMD_MLX4_H_ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 4294d9a..07a1ebb 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -135,6 +135,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
LDLIBS += -lfuse
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -libverbs
+endif
+
LDLIBS += --start-group
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
@@ -219,6 +223,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_E1000_PMD),y)
LDLIBS += -lrte_pmd_e1000
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -lrte_pmd_mlx4
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
LDLIBS += -lrte_pmd_ring
endif
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver
2015-01-29 15:20 ` [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver Adrien Mazarguil
@ 2015-01-29 15:37 ` Stephen Hemminger
2015-01-29 15:45 ` Adrien Mazarguil
0 siblings, 1 reply; 24+ messages in thread
From: Stephen Hemminger @ 2015-01-29 15:37 UTC (permalink / raw)
To: Adrien Mazarguil; +Cc: dev
On Thu, 29 Jan 2015 16:20:46 +0100
Adrien Mazarguil <adrien.mazarguil@6wind.com> wrote:
> This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
> 40) as well as their virtual functions in SR-IOV context through IB Verbs
> (libibverbs) and the dedicated user-space driver (libmlx4).
Are these available with an open source license or is this
just an enabler for closed source?
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver
2015-01-29 15:37 ` Stephen Hemminger
@ 2015-01-29 15:45 ` Adrien Mazarguil
0 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-01-29 15:45 UTC (permalink / raw)
To: Stephen Hemminger; +Cc: dev
On Thu, Jan 29, 2015 at 03:37:39PM +0000, Stephen Hemminger wrote:
> On Thu, 29 Jan 2015 16:20:46 +0100
> Adrien Mazarguil <adrien.mazarguil@6wind.com> wrote:
>
> > This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
> > 40) as well as their virtual functions in SR-IOV context through IB Verbs
> > (libibverbs) and the dedicated user-space driver (libmlx4).
>
> Are these available with an open source license or is this
> just an enabler for closed source?
Yes, both libraries are BSD/GPL-licensed.
--
Adrien Mazarguil
6WIND
^ permalink raw reply [flat|nested] 24+ messages in thread
* [dpdk-dev] [PATCH v2 0/4] Mellanox ConnectX-3 PMD
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-01-29 15:20 ` [dpdk-dev] [PATCH 1/2] scripts: add auto-config-h.sh Adrien Mazarguil
2015-01-29 15:20 ` [dpdk-dev] [PATCH 2/2] mlx4: new poll mode driver Adrien Mazarguil
@ 2015-02-21 4:16 ` Adrien Mazarguil
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 1/4] scripts: add auto-config-h.sh Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 2/4] mlx4: new poll mode driver Adrien Mazarguil
` (3 subsequent siblings)
6 siblings, 2 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-21 4:16 UTC (permalink / raw)
To: dev
This PMD adds support for Mellanox ConnectX-3-based adapters through the
verbs framework. It relies on external libraries (libibverbs and user space
driver libmlx4) and kernel support to do so.
While these libraries and kernel modules are available on OpenFabrics
Alliance's website [1] and provided by package managers on most
distributions, this PMD requires Ethernet extensions that may not be
supported at the moment (this is a work in progress).
Mellanox OFED [2] includes the necessary support and should be used in the
meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel packages
are required from that distribution.
The following kernel modules must be loaded before using this PMD:
- mlx4_core (hardware driver, does global initialization)
- mlx4_en (Ethernet device driver)
- mlx4_ib (InfiniBand device driver)
- ib_uverbs (user space driver for verbs)
[1] https://www.openfabrics.org/
[2] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
v2:
- Include minor bugfix for VLAN filtering.
- Add maintainers entry.
- Add documentation.
Adrien Mazarguil (4):
scripts: add auto-config-h.sh
mlx4: new poll mode driver
maintainers: claim responsibility for mlx4 PMD
doc: add librte_pmd_mlx4 documentation
MAINTAINERS | 4 +
config/common_bsdapp | 11 +
config/common_linuxapp | 11 +
doc/guides/prog_guide/index.rst | 1 +
doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 327 ++
doc/guides/prog_guide/source_org.rst | 1 +
lib/Makefile | 1 +
lib/librte_pmd_mlx4/Makefile | 119 +
lib/librte_pmd_mlx4/mlx4.c | 4739 ++++++++++++++++++++++++++
lib/librte_pmd_mlx4/mlx4.h | 166 +
mk/rte.app.mk | 8 +
scripts/auto-config-h.sh | 137 +
12 files changed, 5525 insertions(+)
create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
create mode 100755 lib/librte_pmd_mlx4/Makefile
create mode 100755 lib/librte_pmd_mlx4/mlx4.c
create mode 100644 lib/librte_pmd_mlx4/mlx4.h
create mode 100755 scripts/auto-config-h.sh
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v2 1/4] scripts: add auto-config-h.sh
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 0/4] Mellanox ConnectX-3 PMD Adrien Mazarguil
@ 2015-02-21 4:16 ` Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
1 sibling, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-21 4:16 UTC (permalink / raw)
To: dev
This script looks for types, macros and functions in header files using
compilation options found in the environment (CC, CFLAGS, CPPFLAGS) to
define feature macros in a generated header.
Useful in combination with external headers that do not provide such macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
scripts/auto-config-h.sh | 137 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 137 insertions(+)
create mode 100755 scripts/auto-config-h.sh
diff --git a/scripts/auto-config-h.sh b/scripts/auto-config-h.sh
new file mode 100755
index 0000000..d897e80
--- /dev/null
+++ b/scripts/auto-config-h.sh
@@ -0,0 +1,137 @@
+#!/bin/sh
+#
+# BSD LICENSE
+#
+# Copyright(c) 2014-2015 6WIND S.A.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Crude script to detect whether particular types, macros and functions are
+# defined by trying to compile a file with a given header. Can be used to
+# perform cross-platform checks since the resulting object file is not
+# executed.
+#
+# Set VERBOSE=1 in the environment to display compiler output and errors.
+#
+# CC, CPPFLAGS, CFLAGS, EXTRA_CPPFLAGS and EXTRA_CFLAGS are taken from the
+# environment.
+#
+# AUTO_CONFIG_CFLAGS may append additional CFLAGS without modifying the
+# above variables.
+
+file=${1:?output file name required (config.h)}
+macro=${2:?output macro name required (HAVE_*)}
+include=${3:?include name required (foo.h)}
+type=${4:?object type required (define, enum, type, field, func)}
+name=${5:?define/type/function name required}
+
+: ${CC:=cc}
+
+temp=/tmp/${0##*/}.$$.c
+
+case $type in
+define)
+ code="\
+#ifndef $name
+#error $name not defined
+#endif
+"
+ ;;
+enum)
+ code="\
+long test____ = $name;
+"
+ ;;
+type)
+ code="\
+$name test____;
+"
+ ;;
+field)
+ code="\
+void test____(void)
+{
+ ${name%%.*} test_____;
+
+ (void)test_____.${name#*.};
+}
+"
+ ;;
+func)
+ code="\
+void (*test____)() = (void (*)())$name;
+"
+ ;;
+*)
+ unset error
+ : ${error:?unknown object type \"$type\"}
+ exit
+esac
+
+if [ "${VERBOSE}" = 1 ]
+then
+ err=2
+ out=1
+ eol='
+'
+else
+ exec 3> /dev/null ||
+ exit
+ err=3
+ out=3
+ eol=' '
+fi &&
+printf 'Looking for %s %s in %s.%s' \
+ "${name}" "${type}" "${include}" "${eol}" &&
+printf "\
+#include <%s>
+
+%s
+" "$include" "$code" > "${temp}" &&
+if ${CC} ${CPPFLAGS} ${EXTRA_CPPFLAGS} ${CFLAGS} ${EXTRA_CFLAGS} \
+ ${AUTO_CONFIG_CFLAGS} \
+ -c -o /dev/null "${temp}" 1>&${out} 2>&${err}
+then
+ rm -f "${temp}"
+ printf "\
+#ifndef %s
+#define %s 1
+#endif /* %s */
+
+" "${macro}" "${macro}" "${macro}" >> "${file}" &&
+ printf 'Defining %s.\n' "${macro}"
+else
+ rm -f "${temp}"
+ printf "\
+/* %s is not defined. */
+
+" "${macro}" >> "${file}" &&
+ printf 'Not defining %s.\n' "${macro}"
+fi
+
+exit
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 0/4] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 1/4] scripts: add auto-config-h.sh Adrien Mazarguil
@ 2015-02-25 13:52 ` Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 1/3] scripts: check features to generate configuration header Adrien Mazarguil
` (4 more replies)
1 sibling, 5 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-25 13:52 UTC (permalink / raw)
To: dev
This PMD adds support for Mellanox ConnectX-3-based adapters through the
verbs framework. It relies on external libraries (libibverbs and user space
driver libmlx4) and kernel support to do so.
While these libraries and kernel modules are available on OpenFabrics
Alliance's website [1] and provided by package managers on most
distributions, this PMD requires Ethernet extensions that may not be
supported at the moment (this is a work in progress).
Mellanox OFED [2] includes the necessary support and should be used in the
meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel packages
are required from that distribution.
The following kernel modules must be loaded before using this PMD:
- mlx4_core (hardware driver, does global initialization)
- mlx4_en (Ethernet device driver)
- mlx4_ib (InfiniBand device driver)
- ib_uverbs (user space driver for verbs)
[1] https://www.openfabrics.org/
[2] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
v2:
- Include minor bugfix for VLAN filtering.
- Add maintainers entry.
- Add documentation.
v3:
- Add script and documentation to MAINTAINERS.
- Make cosmetic changes to copyright notices.
- Remove unwanted executable bits.
- Fix coding style and typos found by checkpatch.
- Add shared library compilation support.
Adrien Mazarguil (3):
scripts: check features to generate configuration header
mlx4: new poll mode driver
doc: add librte_pmd_mlx4 documentation
MAINTAINERS | 6 +
config/common_bsdapp | 11 +
config/common_linuxapp | 11 +
doc/guides/prog_guide/index.rst | 1 +
doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 326 ++
doc/guides/prog_guide/source_org.rst | 1 +
lib/Makefile | 1 +
lib/librte_pmd_mlx4/Makefile | 121 +
lib/librte_pmd_mlx4/mlx4.c | 4749 ++++++++++++++++++++++++++
lib/librte_pmd_mlx4/mlx4.h | 165 +
lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map | 4 +
mk/rte.app.mk | 8 +
scripts/auto-config-h.sh | 136 +
13 files changed, 5540 insertions(+)
create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
create mode 100644 lib/librte_pmd_mlx4/Makefile
create mode 100644 lib/librte_pmd_mlx4/mlx4.c
create mode 100644 lib/librte_pmd_mlx4/mlx4.h
create mode 100644 lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map
create mode 100755 scripts/auto-config-h.sh
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v3 1/3] scripts: check features to generate configuration header
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
@ 2015-02-25 13:52 ` Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 2/3] mlx4: new poll mode driver Adrien Mazarguil
` (3 subsequent siblings)
4 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-25 13:52 UTC (permalink / raw)
To: dev
This script looks for types, macros and functions in header files using
compilation options found in the environment (CC, CFLAGS, CPPFLAGS) to
define feature macros in a generated header.
Useful in combination with external headers that do not provide such macros.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
MAINTAINERS | 1 +
scripts/auto-config-h.sh | 136 +++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 137 insertions(+)
create mode 100755 scripts/auto-config-h.sh
diff --git a/MAINTAINERS b/MAINTAINERS
index 349ad2b..631e8ea 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -45,6 +45,7 @@ F: Makefile
F: config/
F: mk/
F: pkg/
+F: scripts/auto-config-h.sh
F: scripts/depdirs-rule.sh
F: scripts/gen-build-mk.sh
F: scripts/gen-config-h.sh
diff --git a/scripts/auto-config-h.sh b/scripts/auto-config-h.sh
new file mode 100755
index 0000000..4356d7e
--- /dev/null
+++ b/scripts/auto-config-h.sh
@@ -0,0 +1,136 @@
+#!/bin/sh
+#
+# BSD LICENSE
+#
+# Copyright 2014-2015 6WIND S.A.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# Crude script to detect whether particular types, macros and functions are
+# defined by trying to compile a file with a given header. Can be used to
+# perform cross-platform checks since the resulting object file is not
+# executed.
+#
+# Set VERBOSE=1 in the environment to display compiler output and errors.
+#
+# CC, CPPFLAGS, CFLAGS, EXTRA_CPPFLAGS and EXTRA_CFLAGS are taken from the
+# environment.
+#
+# AUTO_CONFIG_CFLAGS may append additional CFLAGS without modifying the
+# above variables.
+
+file=${1:?output file name required (config.h)}
+macro=${2:?output macro name required (HAVE_*)}
+include=${3:?include name required (foo.h)}
+type=${4:?object type required (define, enum, type, field, func)}
+name=${5:?define/type/function name required}
+
+: ${CC:=cc}
+
+temp=/tmp/${0##*/}.$$.c
+
+case $type in
+define)
+ code="\
+#ifndef $name
+#error $name not defined
+#endif
+"
+ ;;
+enum)
+ code="\
+long test____ = $name;
+"
+ ;;
+type)
+ code="\
+$name test____;
+"
+ ;;
+field)
+ code="\
+void test____(void)
+{
+ ${name%%.*} test_____;
+
+ (void)test_____.${name#*.};
+}
+"
+ ;;
+func)
+ code="\
+void (*test____)() = (void (*)())$name;
+"
+ ;;
+*)
+ unset error
+ : ${error:?unknown object type \"$type\"}
+ exit
+esac
+
+if [ "${VERBOSE}" = 1 ]
+then
+ err=2
+ out=1
+ eol='
+'
+else
+ exec 3> /dev/null ||
+ exit
+ err=3
+ out=3
+ eol=' '
+fi &&
+printf 'Looking for %s %s in %s.%s' \
+ "${name}" "${type}" "${include}" "${eol}" &&
+printf "\
+#include <%s>
+
+%s
+" "$include" "$code" > "${temp}" &&
+if ${CC} ${CPPFLAGS} ${EXTRA_CPPFLAGS} ${CFLAGS} ${EXTRA_CFLAGS} \
+ ${AUTO_CONFIG_CFLAGS} \
+ -c -o /dev/null "${temp}" 1>&${out} 2>&${err}
+then
+ rm -f "${temp}"
+ printf "\
+#ifndef %s
+#define %s 1
+#endif /* %s */
+
+" "${macro}" "${macro}" "${macro}" >> "${file}" &&
+ printf 'Defining %s.\n' "${macro}"
+else
+ rm -f "${temp}"
+ printf "\
+/* %s is not defined. */
+
+" "${macro}" >> "${file}" &&
+ printf 'Not defining %s.\n' "${macro}"
+fi
+
+exit
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v3 2/3] mlx4: new poll mode driver
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 1/3] scripts: check features to generate configuration header Adrien Mazarguil
@ 2015-02-25 13:52 ` Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4 documentation Adrien Mazarguil
` (2 subsequent siblings)
4 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-25 13:52 UTC (permalink / raw)
To: dev
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Also claim responsibility in the MAINTAINERS file.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
---
MAINTAINERS | 4 +
config/common_bsdapp | 11 +
config/common_linuxapp | 11 +
lib/Makefile | 1 +
lib/librte_pmd_mlx4/Makefile | 121 +
lib/librte_pmd_mlx4/mlx4.c | 4749 ++++++++++++++++++++++++++
lib/librte_pmd_mlx4/mlx4.h | 165 +
lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map | 4 +
mk/rte.app.mk | 8 +
9 files changed, 5074 insertions(+)
create mode 100644 lib/librte_pmd_mlx4/Makefile
create mode 100644 lib/librte_pmd_mlx4/mlx4.c
create mode 100644 lib/librte_pmd_mlx4/mlx4.h
create mode 100644 lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map
diff --git a/MAINTAINERS b/MAINTAINERS
index 631e8ea..d8b0fbc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -220,6 +220,10 @@ Intel fm10k
M: Jing Chen <jing.d.chen@intel.com>
F: lib/librte_pmd_fm10k/
+Mellanox mlx4
+M: Adrien Mazarguil <adrien.mazarguil@6wind.com>
+F: lib/librte_pmd_mlx4/
+
RedHat virtio
M: Changchun Ouyang <changchun.ouyang@intel.com>
F: lib/librte_pmd_virtio/
diff --git a/config/common_bsdapp b/config/common_bsdapp
index 83a62a6..4bbacaf 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -194,6 +194,17 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 2716381..2ea6711 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -192,6 +192,17 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index 7dc12af..3ebd394 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -45,6 +45,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += librte_pmd_e1000
DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += librte_pmd_fm10k
+DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += librte_pmd_mlx4
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/lib/librte_pmd_mlx4/Makefile b/lib/librte_pmd_mlx4/Makefile
new file mode 100644
index 0000000..de50a5a
--- /dev/null
+++ b/lib/librte_pmd_mlx4/Makefile
@@ -0,0 +1,121 @@
+# BSD LICENSE
+#
+# Copyright 2012-2015 6WIND S.A.
+# Copyright 2012 Mellanox.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name.
+LIB = librte_pmd_mlx4.a
+
+# Sources.
+SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c
+
+# Dependencies.
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_malloc
+
+# Basic CFLAGS.
+CFLAGS += -O3
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -g
+CFLAGS += -I.
+CFLAGS += -D_XOPEN_SOURCE=600
+CFLAGS += $(WERROR_FLAGS)
+
+# A few warnings cannot be avoided in external headers.
+CFLAGS += -Wno-error=cast-qual
+
+EXPORT_MAP := rte_pmd_mlx4_version.map
+LIBABIVER := 1
+
+# DEBUG which is usually provided on the command-line may enable
+# CONFIG_RTE_LIBRTE_MLX4_DEBUG.
+ifeq ($(DEBUG),1)
+CONFIG_RTE_LIBRTE_MLX4_DEBUG := y
+endif
+
+# User-defined CFLAGS.
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_DEBUG),y)
+CFLAGS += -pedantic -UNDEBUG -DPEDANTIC
+else
+CFLAGS += -DNDEBUG -UPEDANTIC
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N
+CFLAGS += -DMLX4_PMD_SGE_WR_N=$(CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE
+CFLAGS += -DMLX4_PMD_MAX_INLINE=$(CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE
+CFLAGS += -DMLX4_PMD_TX_MP_CACHE=$(CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS
+CFLAGS += -DMLX4_PMD_SOFT_COUNTERS=$(CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE
+CFLAGS += -DMLX4_PMD_COMPAT_VMWARE=$(CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE)
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
+
+# Generate and clean-up mlx4_autoconf.h.
+
+export CC CFLAGS CPPFLAGS EXTRA_CFLAGS EXTRA_CPPFLAGS
+export AUTO_CONFIG_CFLAGS = -Wno-error
+
+mlx4_autoconf.h: $(RTE_SDK)/scripts/auto-config-h.sh
+ $Q $(RM) -f -- '$@'
+ $Q sh -- '$<' '$@' \
+ RSS_SUPPORT \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_UD_RSS
+ $Q sh -- '$<' '$@' \
+ INLINE_RECV \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ
+ $Q sh -- '$<' '$@' \
+ SEND_RAW_WR_SUPPORT \
+ infiniband/verbs.h \
+ type 'struct ibv_send_wr_raw'
+
+mlx4.o: mlx4_autoconf.h
+
+clean_mlx4: FORCE
+ $Q rm -f -- mlx4_autoconf.h
+
+clean: clean_mlx4
diff --git a/lib/librte_pmd_mlx4/mlx4.c b/lib/librte_pmd_mlx4/mlx4.c
new file mode 100644
index 0000000..c4a65a5
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.c
@@ -0,0 +1,4749 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2012-2015 6WIND S.A.
+ * Copyright 2012 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Known limitations:
+ * - Multiple RX VLAN filters can be configured, but only the first one
+ * works properly.
+ * - RSS hash key and options cannot be modified.
+ * - Hardware counters aren't implemented.
+ */
+
+/* System headers. */
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <limits.h>
+#include <assert.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <linux/if.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+
+/* DPDK headers don't like -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <rte_config.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_dev.h>
+#include <rte_mbuf.h>
+#include <rte_errno.h>
+#include <rte_mempool.h>
+#include <rte_prefetch.h>
+#include <rte_malloc.h>
+#include <rte_spinlock.h>
+#include <rte_atomic.h>
+#include <rte_version.h>
+#include <rte_log.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+
+#include <infiniband/verbs.h>
+
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Generated configuration header. */
+#include "mlx4_autoconf.h"
+
+/* PMD header. */
+#include "mlx4.h"
+
+/* Runtime logging through RTE_LOG() is enabled when not in debugging mode.
+ * Intermediate LOG_*() macros add the required end-of-line characters. */
+#ifndef NDEBUG
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, MLX4_DRIVER_NAME ": " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, __VA_ARGS__)
+#endif
+
+/* Convenience macros for accessing mbuf fields. */
+#define NEXT(m) ((m)->next)
+#define DATA_LEN(m) ((m)->data_len)
+#define PKT_LEN(m) ((m)->pkt_len)
+#define DATA_OFF(m) ((m)->data_off)
+#define SET_DATA_OFF(m, o) ((m)->data_off = (o))
+#define NB_SEGS(m) ((m)->nb_segs)
+#define PORT(m) ((m)->port)
+
+/* Work Request ID data type (64 bit). */
+typedef union {
+ struct {
+ uint32_t id;
+ uint16_t offset;
+ } data;
+ uint64_t raw;
+} wr_id_t;
+
+#define WR_ID(o) (((wr_id_t *)&(o))->data)
+
+/* Compile-time check. */
+static inline void wr_id_t_check(void)
+{
+ wr_id_t check[1 + (2 * -!(sizeof(wr_id_t) == sizeof(uint64_t)))];
+
+ (void)check;
+ (void)wr_id_t_check;
+}
+
+/* If raw send operations are available, use them since they are faster. */
+#ifdef SEND_RAW_WR_SUPPORT
+typedef struct ibv_send_wr_raw mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send_raw
+#else
+typedef struct ibv_send_wr mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send
+#endif
+
+struct mlx4_rxq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t ipackets; /**< Total of successfully received packets. */
+ uint64_t ibytes; /**< Total of successfully received bytes. */
+#endif
+ uint64_t idropped; /**< Total of packets dropped when RX ring full. */
+ uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
+};
+
+struct mlx4_txq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t opackets; /**< Total of successfully sent packets. */
+ uint64_t obytes; /**< Total of successfully sent bytes. */
+#endif
+ uint64_t odropped; /**< Total of packets not sent when TX ring full. */
+};
+
+/* RX element (scattered packets). */
+struct rxq_elt_sp {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ struct rte_mbuf *bufs[MLX4_PMD_SGE_WR_N]; /* SGEs buffers. */
+};
+
+/* RX element. */
+struct rxq_elt {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sge; /* Scatter/Gather Element. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* RX queue descriptor. */
+struct rxq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct rte_mempool *mp; /* Memory Pool for allocations. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+ /*
+ * There is exactly one flow configured per MAC address. Each flow
+ * may contain several specifications, one per configured VLAN ID.
+ */
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ struct ibv_exp_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES];
+ struct ibv_exp_flow *promisc_flow; /* Promiscuous flow. */
+ struct ibv_exp_flow *allmulti_flow; /* Multicast flow. */
+ unsigned int port_id; /* Port ID for incoming packets. */
+ unsigned int elts_n; /* (*elts)[] length. */
+ union {
+ struct rxq_elt_sp (*sp)[]; /* Scattered RX elements. */
+ struct rxq_elt (*no_sp)[]; /* RX elements. */
+ } elts;
+ unsigned int sp:1; /* Use scattered RX elements. */
+ uint32_t mb_len; /* Length of a mp-issued mbuf. */
+ struct mlx4_rxq_stats stats; /* RX queue counters. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+/* TX element. */
+struct txq_elt {
+ mlx4_send_wr_t wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* Linear buffer type. It is used when transmitting buffers with too many
+ * segments that do not fit the hardware queue (see max_send_sge).
+ * Extra segments are copied (linearized) in such buffers, replacing the
+ * last SGE during TX.
+ * The size is arbitrary but large enough to hold a jumbo frame with
+ * 8 segments considering mbuf.buf_len is about 2048 bytes. */
+typedef uint8_t linear_t[16384];
+
+/* TX queue descriptor. */
+struct txq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct {
+ struct rte_mempool *mp; /* Cached Memory Pool. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ uint32_t lkey; /* mr->lkey */
+ } mp2mr[MLX4_PMD_TX_MP_CACHE]; /* MP to MR translation table. */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+#if MLX4_PMD_MAX_INLINE > 0
+ uint32_t max_inline; /* Max inline send size <= MLX4_PMD_MAX_INLINE. */
+#endif
+ unsigned int elts_n; /* (*elts)[] length. */
+ struct txq_elt (*elts)[]; /* TX elements. */
+ unsigned int elts_head; /* Current index in (*elts)[]. */
+ unsigned int elts_tail; /* First element awaiting completion. */
+ unsigned int elts_comp; /* Number of completion requests. */
+ struct mlx4_txq_stats stats; /* TX queue counters. */
+ linear_t (*elts_linear)[]; /* Linearized buffers. */
+ struct ibv_mr *mr_linear; /* Memory Region for linearized buffers. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+struct priv {
+ struct rte_eth_dev *dev; /* Ethernet device. */
+ struct ibv_context *ctx; /* Verbs context. */
+ struct ibv_device_attr device_attr; /* Device properties. */
+ struct ibv_port_attr port_attr; /* Physical port properties. */
+ struct ibv_pd *pd; /* Protection Domain. */
+ /*
+ * MAC addresses array and configuration bit-field.
+ * An extra entry that cannot be modified by the DPDK is reserved
+ * for broadcast frames (destination MAC address ff:ff:ff:ff:ff:ff).
+ */
+ struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ /* VLAN filters. */
+ struct {
+ unsigned int enabled:1; /* If enabled. */
+ unsigned int id:12; /* VLAN ID (0-4095). */
+ } vlan_filter[MLX4_MAX_VLAN_IDS]; /* VLAN filters table. */
+ /* Device properties. */
+ uint16_t mtu; /* Configured MTU. */
+ uint8_t port; /* Physical port number. */
+ unsigned int started:1; /* Device started, flows enabled. */
+ unsigned int promisc:1; /* Device in promiscuous mode. */
+ unsigned int promisc_ok:1; /* Promiscuous flow is supported. */
+ unsigned int allmulti:1; /* Device receives all multicast packets. */
+ unsigned int hw_qpg:1; /* QP groups are supported. */
+ unsigned int hw_tss:1; /* TSS is supported. */
+ unsigned int hw_rss:1; /* RSS is supported. */
+ unsigned int rss:1; /* RSS is enabled. */
+#ifdef MLX4_COMPAT_VMWARE
+ unsigned int vmware:1; /* Use VMware compatibility. */
+#endif
+ unsigned int vf:1; /* This is a VF device. */
+#ifdef INLINE_RECV
+ unsigned int inl_recv_size; /* Inline recv size */
+#endif
+ unsigned int max_rss_tbl_sz; /* Maximum number of RSS queues. */
+ /* RX/TX queues. */
+ struct rxq rxq_parent; /* Parent queue when RSS is enabled. */
+ unsigned int rxqs_n; /* RX queues array size. */
+ unsigned int txqs_n; /* TX queues array size. */
+ struct rxq *(*rxqs)[]; /* RX queues. */
+ struct txq *(*txqs)[]; /* TX queues. */
+ rte_spinlock_t lock; /* Lock for control functions. */
+};
+
+/**
+ * Lock private structure to protect it from concurrent access in the
+ * control path.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_lock(struct priv *priv)
+{
+ rte_spinlock_lock(&priv->lock);
+}
+
+/**
+ * Unlock private structure.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_unlock(struct priv *priv)
+{
+ rte_spinlock_unlock(&priv->lock);
+}
+
+/* Allocate a buffer on the stack and fill it with a printf format string. */
+#define MKSTR(name, ...) \
+ char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
+ \
+ snprintf(name, sizeof(name), __VA_ARGS__)
+
+/**
+ * Get interface name from private structure.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[out] ifname
+ * Interface name output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+{
+ int ret = -1;
+ DIR *dir;
+ struct dirent *dent;
+
+ {
+ MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
+
+ dir = opendir(path);
+ if (dir == NULL)
+ return -1;
+ }
+ while ((dent = readdir(dir)) != NULL) {
+ char *name = dent->d_name;
+ FILE *file;
+ unsigned int dev_id;
+ int r;
+
+ if ((name[0] == '.') &&
+ ((name[1] == '\0') ||
+ ((name[1] == '.') && (name[2] == '\0'))))
+ continue;
+
+ MKSTR(path, "%s/device/net/%s/dev_id",
+ priv->ctx->device->ibdev_path, name);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ continue;
+ r = fscanf(file, "%x", &dev_id);
+ fclose(file);
+ if ((r == 1) && (dev_id == (priv->port - 1u))) {
+ snprintf(*ifname, sizeof(*ifname), "%s", name);
+ ret = 0;
+ break;
+ }
+ }
+ closedir(dir);
+ return ret;
+}
+
+/**
+ * Read from sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[out] buf
+ * Data output buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_read(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ ret = fread(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) && (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Write to sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[in] buf
+ * Data buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_write(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "wb");
+ if (file == NULL)
+ return -1;
+ ret = fwrite(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) || (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Get unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param[out] value
+ * Value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
+{
+ int ret;
+ unsigned long value_ret;
+ char value_str[32];
+
+ ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot read %s value from sysfs: %s",
+ name, strerror(errno));
+ return -1;
+ }
+ value_str[ret] = '\0';
+ errno = 0;
+ value_ret = strtoul(value_str, NULL, 0);
+ if (errno) {
+ DEBUG("invalid %s value `%s': %s", name, value_str,
+ strerror(errno));
+ return -1;
+ }
+ *value = value_ret;
+ return 0;
+}
+
+/**
+ * Set unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param value
+ * Value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
+{
+ int ret;
+ MKSTR(value_str, "%lu", value);
+
+ ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
+ name, value_str, value, strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Perform ifreq ioctl() on associated Ethernet device.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param req
+ * Request number to pass to ioctl().
+ * @param[out] ifr
+ * Interface request structure output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+{
+ int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+ int ret = -1;
+
+ if (sock == -1)
+ return ret;
+ if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
+ ret = ioctl(sock, req, ifr);
+ close(sock);
+ return ret;
+}
+
+/**
+ * Get device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[out] mtu
+ * MTU value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_mtu(struct priv *priv, uint16_t *mtu)
+{
+ unsigned long ulong_mtu;
+
+ if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
+ return -1;
+ *mtu = ulong_mtu;
+ return 0;
+}
+
+/**
+ * Set device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mtu
+ * MTU value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_mtu(struct priv *priv, uint16_t mtu)
+{
+ return priv_set_sysfs_ulong(priv, "mtu", mtu);
+}
+
+/**
+ * Set device flags.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param keep
+ * Bitmask for flags that must remain untouched.
+ * @param flags
+ * Bitmask for flags to modify.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+{
+ unsigned long tmp;
+
+ if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
+ return -1;
+ tmp &= keep;
+ tmp |= flags;
+ return priv_set_sysfs_ulong(priv, "flags", tmp);
+}
+
+/* Device configuration. */
+
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp);
+
+static void
+rxq_cleanup(struct rxq *rxq);
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues.
+ * Allocate parent RSS queue when several RX queues are requested.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int rxqs_n = dev->data->nb_rx_queues;
+ unsigned int txqs_n = dev->data->nb_tx_queues;
+ unsigned int tmp;
+ int ret;
+
+ priv->rxqs = (void *)dev->data->rx_queues;
+ priv->txqs = (void *)dev->data->tx_queues;
+ if (txqs_n != priv->txqs_n) {
+ INFO("%p: TX queues number update: %u -> %u",
+ (void *)dev, priv->txqs_n, txqs_n);
+ priv->txqs_n = txqs_n;
+ }
+ if (rxqs_n == priv->rxqs_n)
+ return 0;
+ INFO("%p: RX queues number update: %u -> %u",
+ (void *)dev, priv->rxqs_n, rxqs_n);
+ /* If RSS is enabled, disable it first. */
+ if (priv->rss) {
+ unsigned int i;
+
+ /* Only if there are no remaining child RX queues. */
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ return EINVAL;
+ rxq_cleanup(&priv->rxq_parent);
+ priv->rss = 0;
+ priv->rxqs_n = 0;
+ }
+ if (rxqs_n <= 1) {
+ /* Nothing else to do. */
+ priv->rxqs_n = rxqs_n;
+ return 0;
+ }
+ /* Allocate a new RSS parent queue if supported by hardware. */
+ if (!priv->hw_rss) {
+ ERROR("%p: only a single RX queue can be configured when"
+ " hardware doesn't support RSS",
+ (void *)dev);
+ return EINVAL;
+ }
+ /* Fail if hardware doesn't support that many RSS queues. */
+ if (rxqs_n >= priv->max_rss_tbl_sz) {
+ ERROR("%p: only %u RX queues can be configured for RSS",
+ (void *)dev, priv->max_rss_tbl_sz);
+ return EINVAL;
+ }
+ priv->rss = 1;
+ tmp = priv->rxqs_n;
+ priv->rxqs_n = rxqs_n;
+ ret = rxq_setup(dev, &priv->rxq_parent, 0, 0, NULL, NULL);
+ if (!ret)
+ return 0;
+ /* Failure, rollback. */
+ priv->rss = 0;
+ priv->rxqs_n = tmp;
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback for Ethernet device configuration.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = dev_configure(dev);
+ assert(ret >= 0);
+ priv_unlock(priv);
+ return -ret;
+}
+
+/* TX queues handling. */
+
+/**
+ * Allocate TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_alloc_elts(struct txq *txq, unsigned int elts_n)
+{
+ unsigned int i;
+ struct txq_elt (*elts)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts), 0, txq->socket);
+ linear_t (*elts_linear)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts_linear), 0,
+ txq->socket);
+ struct ibv_mr *mr_linear = NULL;
+ int ret = 0;
+
+ if ((elts == NULL) || (elts_linear == NULL)) {
+ ERROR("%p: can't allocate packets array", (void *)txq);
+ ret = ENOMEM;
+ goto error;
+ }
+ mr_linear =
+ ibv_reg_mr(txq->priv->pd, elts_linear, sizeof(*elts_linear),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (mr_linear == NULL) {
+ ERROR("%p: unable to configure MR, ibv_reg_mr() failed",
+ (void *)txq);
+ ret = EINVAL;
+ goto error;
+ }
+ for (i = 0; (i != elts_n); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+ mlx4_send_wr_t *wr = &elt->wr;
+
+ /* Configure WR. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset = 0;
+ wr->sg_list = &elt->sges[0];
+ wr->opcode = IBV_WR_SEND;
+ /* Other fields are updated during TX. */
+ }
+ DEBUG("%p: allocated and configured %u WRs", (void *)txq, elts_n);
+ txq->elts_n = elts_n;
+ txq->elts = elts;
+ txq->elts_head = 0;
+ txq->elts_tail = 0;
+ txq->elts_comp = 0;
+ txq->elts_linear = elts_linear;
+ txq->mr_linear = mr_linear;
+ assert(ret == 0);
+ return 0;
+error:
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts != NULL)
+ rte_free(elts);
+ DEBUG("%p: failed, freed everything", (void *)txq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_free_elts(struct txq *txq)
+{
+ unsigned int i;
+ unsigned int elts_n = txq->elts_n;
+ struct txq_elt (*elts)[elts_n] = txq->elts;
+ linear_t (*elts_linear)[elts_n] = txq->elts_linear;
+ struct ibv_mr *mr_linear = txq->mr_linear;
+
+ DEBUG("%p: freeing WRs", (void *)txq);
+ txq->elts_n = 0;
+ txq->elts = NULL;
+ txq->elts_linear = NULL;
+ txq->mr_linear = NULL;
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+
+ if (WR_ID(elt->wr.wr_id).offset == 0)
+ continue;
+ rte_pktmbuf_free((void *)(elt->sges[0].addr -
+ WR_ID(elt->wr.wr_id).offset));
+ }
+ rte_free(elts);
+}
+
+
+/**
+ * Clean up a TX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_cleanup(struct txq *txq)
+{
+ size_t i;
+
+ DEBUG("cleaning up %p", (void *)txq);
+ txq_free_elts(txq);
+ if (txq->qp != NULL)
+ claim_zero(ibv_destroy_qp(txq->qp));
+ if (txq->cq != NULL)
+ claim_zero(ibv_destroy_cq(txq->cq));
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (txq->mp2mr[i].mp == NULL)
+ break;
+ assert(txq->mp2mr[i].mr != NULL);
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ }
+ memset(txq, 0, sizeof(*txq));
+}
+
+/**
+ * Manage TX completions.
+ *
+ * When sending a burst, mlx4_tx_burst() posts several WRs.
+ * To improve performance, a completion event is only required for the last of
+ * them. Doing so discards completion information for other WRs, but this
+ * information would not be used anyway.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ *
+ * @return
+ * 0 on success, -1 on failure.
+ */
+static int
+txq_complete(struct txq *txq)
+{
+ unsigned int elts_comp = txq->elts_comp;
+ unsigned int elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ struct ibv_wc wcs[elts_comp];
+ int wcs_n;
+
+ if (unlikely(elts_comp == 0))
+ return 0;
+#ifdef DEBUG_SEND
+ DEBUG("%p: processing %u work requests completions",
+ (void *)txq, elts_comp);
+#endif
+ wcs_n = ibv_poll_cq(txq->cq, elts_comp, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("%p: ibv_poll_cq() failed (wcs_n=%d)",
+ (void *)txq, wcs_n);
+ return -1;
+ }
+ elts_comp -= wcs_n;
+ assert(elts_comp <= txq->elts_comp);
+ /*
+ * Work Completion ID contains the associated element index in
+ * (*txq->elts)[]. Since WCs are returned in order, we only need to
+ * look at the last WC to clear older Work Requests.
+ *
+ * Assume WC status is successful as nothing can be done about it
+ * anyway.
+ */
+ elts_tail = WR_ID(wcs[wcs_n - 1].wr_id).id;
+ /* Consume the last WC. */
+ if (++elts_tail >= elts_n)
+ elts_tail = 0;
+ txq->elts_tail = elts_tail;
+ txq->elts_comp = elts_comp;
+ return 0;
+}
+
+/**
+ * Get Memory Region (MR) <-> Memory Pool (MP) association from txq->mp2mr[].
+ * Add MP to txq->mp2mr[] if it's not registered yet. If mp2mr[] is full,
+ * remove an entry first.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] mp
+ * Memory Pool for which a Memory Region lkey must be returned.
+ *
+ * @return
+ * mr->lkey on success, (uint32_t)-1 on failure.
+ */
+static uint32_t
+txq_mp2mr(struct txq *txq, struct rte_mempool *mp)
+{
+ unsigned int i;
+ struct ibv_mr *mr;
+
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (unlikely(txq->mp2mr[i].mp == NULL)) {
+ /* Unknown MP, add a new MR for it. */
+ break;
+ }
+ if (txq->mp2mr[i].mp == mp) {
+ assert(txq->mp2mr[i].lkey != (uint32_t)-1);
+ assert(txq->mp2mr[i].mr->lkey == txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+ }
+ }
+ /* Add a new entry, register MR first. */
+ DEBUG("%p: discovered new memory pool %p", (void *)txq, (void *)mp);
+ mr = ibv_reg_mr(txq->priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (unlikely(mr == NULL)) {
+ DEBUG("%p: unable to configure MR, ibv_reg_mr() failed.",
+ (void *)txq);
+ return (uint32_t)-1;
+ }
+ if (unlikely(i == elemof(txq->mp2mr))) {
+ /* Table is full, remove oldest entry. */
+ DEBUG("%p: MR <-> MP table full, dropping oldest entry.",
+ (void *)txq);
+ --i;
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ memmove(&txq->mp2mr[0], &txq->mp2mr[1],
+ (sizeof(txq->mp2mr) - sizeof(txq->mp2mr[0])));
+ }
+ /* Store the new entry. */
+ txq->mp2mr[i].mp = mp;
+ txq->mp2mr[i].mr = mr;
+ txq->mp2mr[i].lkey = mr->lkey;
+ DEBUG("%p: new MR lkey for MP %p: 0x%08" PRIu32,
+ (void *)txq, (void *)mp, txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+}
+
+/**
+ * Copy scattered mbuf contents to a single linear buffer.
+ *
+ * @param[out] linear
+ * Linear output buffer.
+ * @param[in] buf
+ * Scattered input buffer.
+ *
+ * @return
+ * Number of bytes copied to the output buffer or 0 if not large enough.
+ */
+static unsigned int
+linearize_mbuf(linear_t *linear, struct rte_mbuf *buf)
+{
+ unsigned int size = 0;
+ unsigned int offset;
+
+ do {
+ unsigned int len = DATA_LEN(buf);
+
+ offset = size;
+ size += len;
+ if (unlikely(size > sizeof(*linear)))
+ return 0;
+ memcpy(&(*linear)[offset],
+ rte_pktmbuf_mtod(buf, uint8_t *),
+ len);
+ buf = NEXT(buf);
+ } while (buf != NULL);
+ return size;
+}
+
+/**
+ * DPDK callback for TX.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+mlx4_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ mlx4_send_wr_t head;
+ mlx4_send_wr_t **wr_next = &head.next;
+ mlx4_send_wr_t *bad_wr;
+ unsigned int elts_head = txq->elts_head;
+ const unsigned int elts_tail = txq->elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ unsigned int i;
+ unsigned int max;
+ int err;
+
+ txq_complete(txq);
+ max = (elts_n - (elts_head - elts_tail));
+ if (max > elts_n)
+ max -= elts_n;
+ assert(max >= 1);
+ assert(max <= elts_n);
+ /* Always leave one free entry in the ring. */
+ --max;
+ if (max == 0)
+ return 0;
+ if (max > pkts_n)
+ max = pkts_n;
+ for (i = 0; (i != max); ++i) {
+ struct rte_mbuf *buf = pkts[i];
+ struct txq_elt *elt = &(*txq->elts)[elts_head];
+ mlx4_send_wr_t *wr = &elt->wr;
+ unsigned int segs = NB_SEGS(buf);
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ unsigned int sent_size = 0;
+#endif
+ unsigned int j;
+ int linearize = 0;
+
+ /* Clean up old buffer. */
+ if (likely(WR_ID(wr->wr_id).offset != 0)) {
+ struct rte_mbuf *tmp = (void *)
+ (elt->sges[0].addr - WR_ID(wr->wr_id).offset);
+
+ /* Faster than rte_pktmbuf_free(). */
+ do {
+ struct rte_mbuf *next = NEXT(tmp);
+
+ rte_pktmbuf_free_seg(tmp);
+ tmp = next;
+ } while (tmp != NULL);
+ }
+#ifndef NDEBUG
+ /* For assert(). */
+ WR_ID(wr->wr_id).offset = 0;
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ /* Sanity checks, most of which are only relevant with
+ * debugging enabled. */
+ assert(WR_ID(wr->wr_id).id == elts_head);
+ assert(WR_ID(wr->wr_id).offset == 0);
+ assert(wr->next == NULL);
+ assert(wr->sg_list == &elt->sges[0]);
+ assert(wr->num_sge == 0);
+ assert(wr->opcode == IBV_WR_SEND);
+ /* When there are too many segments, extra segments are
+ * linearized in the last SGE. */
+ if (unlikely(segs > elemof(elt->sges))) {
+ segs = (elemof(elt->sges) - 1);
+ linearize = 1;
+ }
+ /* Set WR fields. */
+ assert(((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf) <= 0xffff);
+ WR_ID(wr->wr_id).offset =
+ ((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf);
+ wr->num_sge = segs;
+ /* Register segments as SGEs. */
+ for (j = 0; (j != segs); ++j) {
+ struct ibv_sge *sge = &elt->sges[j];
+ uint32_t lkey;
+
+ /* Retrieve Memory Region key for this memory pool. */
+ lkey = txq_mp2mr(txq, buf->pool);
+ if (unlikely(lkey == (uint32_t)-1)) {
+ /* MR does not exist. */
+ DEBUG("%p: unable to get MP <-> MR"
+ " association", (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf, char *);
+ if (txq->priv->vf)
+ rte_prefetch0((volatile void *)sge->addr);
+ sge->length = DATA_LEN(buf);
+ sge->lkey = lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += sge->length;
+#endif
+ buf = NEXT(buf);
+ }
+ /* If buf is not NULL here and is not going to be linearized,
+ * nb_segs is not valid. */
+ assert(j == segs);
+ assert((buf == NULL) || (linearize));
+ /* Linearize extra segments. */
+ if (linearize) {
+ struct ibv_sge *sge = &elt->sges[segs];
+ linear_t *linear = &(*txq->elts_linear)[elts_head];
+ unsigned int size = linearize_mbuf(linear, buf);
+
+ assert(segs == (elemof(elt->sges) - 1));
+ if (size == 0) {
+ /* Invalid packet. */
+ DEBUG("%p: packet too large to be linearized.",
+ (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* If MLX4_PMD_SGE_WR_N is 1, free mbuf immediately
+ * and clear offset from WR ID. */
+ if (elemof(elt->sges) == 1) {
+ do {
+ struct rte_mbuf *next = NEXT(buf);
+
+ rte_pktmbuf_free_seg(buf);
+ buf = next;
+ } while (buf != NULL);
+ WR_ID(wr->wr_id).offset = 0;
+ }
+ /* Set WR fields and fill SGE with linear buffer. */
+ ++wr->num_sge;
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)&(*linear)[0];
+ sge->length = size;
+ sge->lkey = txq->mr_linear->lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += size;
+#endif
+ }
+ /* Link WRs together for ibv_post_send(). */
+ *wr_next = wr;
+ wr_next = &wr->next;
+#if MLX4_PMD_MAX_INLINE > 0
+ if (sent_size <= txq->max_inline)
+ wr->send_flags = IBV_SEND_INLINE;
+ else
+#endif
+ wr->send_flags = 0;
+ if (++elts_head >= elts_n)
+ elts_head = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent bytes counter. */
+ txq->stats.obytes += sent_size;
+#endif
+ }
+stop:
+ /* Take a shortcut if nothing must be sent. */
+ if (unlikely(i == 0))
+ return 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent packets counter. */
+ txq->stats.opackets += i;
+#endif
+ *wr_next = NULL;
+ /* The last WR is the only one asking for a completion event. */
+ containerof(wr_next, mlx4_send_wr_t, next)->
+ send_flags |= IBV_SEND_SIGNALED;
+ err = mlx4_post_send(txq->qp, head.next, &bad_wr);
+ if (unlikely(err)) {
+ unsigned int unsent = 0;
+
+ /* An error occurred, completion event is lost. Fix counters. */
+ while (bad_wr != NULL) {
+ struct txq_elt *elt =
+ containerof(bad_wr, struct txq_elt, wr);
+ mlx4_send_wr_t *wr = &elt->wr;
+ mlx4_send_wr_t *next = wr->next;
+#if defined(MLX4_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
+ unsigned int j;
+#endif
+
+ assert(wr == bad_wr);
+ /* Clean up TX element without freeing it, caller
+ * should take care of this. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ for (j = 0; ((int)j < wr->num_sge); ++j)
+ txq->stats.obytes -= wr->sg_list[j].length;
+#endif
+ ++unsent;
+#ifndef NDEBUG
+ /* For assert(). */
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ bad_wr = next;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ txq->stats.opackets -= unsent;
+#endif
+ assert(i >= unsent);
+ i -= unsent;
+ /* "Unsend" remaining packets. */
+ elts_head -= unsent;
+ if (elts_head >= elts_n)
+ elts_head += elts_n;
+ assert(elts_head < elts_n);
+ DEBUG("%p: mlx4_post_send() failed, %u unprocessed WRs: %s",
+ (void *)txq, unsent,
+ ((err <= -1) ? "Internal error" : strerror(err)));
+ } else
+ ++txq->elts_comp;
+ txq->elts_head = elts_head;
+ return i;
+}
+
+/**
+ * Configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_setup(struct rte_eth_dev *dev, struct txq *txq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq tmpl = {
+ .priv = priv,
+ .socket = socket
+ };
+ union {
+ struct ibv_qp_init_attr init;
+ struct ibv_exp_qp_attr mod;
+ } attr;
+ int ret = 0;
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of TX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ desc /= MLX4_PMD_SGE_WR_N;
+ /* MRs will be registered in mp2mr[] later. */
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+ attr.init = (struct ibv_qp_init_attr){
+ /* CQ to be associated with the send queue. */
+ .send_cq = tmpl.cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = tmpl.cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_send_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_send_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+#if MLX4_PMD_MAX_INLINE > 0
+ .max_inline_data = MLX4_PMD_MAX_INLINE,
+#endif
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ /* Do *NOT* enable this, completions events are managed per
+ * TX burst. */
+ .sq_sig_all = 0
+ };
+ tmpl.qp = ibv_create_qp(priv->pd, &attr.init);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+#if MLX4_PMD_MAX_INLINE > 0
+ /* ibv_create_qp() updates this value. */
+ tmpl.max_inline = attr.init.cap.max_inline_data;
+#endif
+ attr.mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod,
+ (IBV_EXP_QP_STATE | IBV_EXP_QP_PORT));
+ if (ret) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ ret = txq_alloc_elts(&tmpl, desc);
+ if (ret) {
+ ERROR("%p: TXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE);
+ if (ret) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod.qp_state = IBV_QPS_RTS;
+ ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE);
+ if (ret) {
+ ERROR("%p: QP state to IBV_QPS_RTS failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Clean up txq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old txq just in case", (void *)txq);
+ txq_cleanup(txq);
+ *txq = tmpl;
+ DEBUG("%p: txq updated with %p", (void *)txq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ txq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq *txq = (*priv->txqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->txqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->txqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (txq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)txq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->txqs)[idx] = NULL;
+ txq_cleanup(txq);
+ } else {
+ txq = rte_calloc_socket("TXQ", 1, sizeof(*txq), 0, socket);
+ if (txq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = txq_setup(dev, txq, desc, socket, conf);
+ if (ret)
+ rte_free(txq);
+ else {
+ txq->stats.idx = idx;
+ DEBUG("%p: adding TX queue %p to list",
+ (void *)dev, (void *)txq);
+ (*priv->txqs)[idx] = txq;
+ /* Update send callback. */
+ dev->tx_pkt_burst = mlx4_tx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a TX queue.
+ *
+ * @param dpdk_txq
+ * Generic TX queue pointer.
+ */
+static void
+mlx4_tx_queue_release(void *dpdk_txq)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (txq == NULL)
+ return;
+ priv = txq->priv;
+ priv_lock(priv);
+ for (i = 0; (i != priv->txqs_n); ++i)
+ if ((*priv->txqs)[i] == txq) {
+ DEBUG("%p: removing TX queue %p from list",
+ (void *)priv->dev, (void *)txq);
+ (*priv->txqs)[i] = NULL;
+ break;
+ }
+ txq_cleanup(txq);
+ rte_free(txq);
+ priv_unlock(priv);
+}
+
+/* RX queues handling. */
+
+/**
+ * Allocate RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts_sp(struct rxq *rxq, unsigned int elts_n,
+ struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt_sp (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge (*sges)[(elemof(elt->sges))] = &elt->sges;
+
+ /* These two arrays must have the same size. */
+ assert(elemof(elt->sges) == elemof(elt->bufs));
+ /* Configure WR. */
+ wr->wr_id = i;
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = &(*sges)[0];
+ wr->num_sge = elemof(*sges);
+ /* For each SGE (segment). */
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct ibv_sge *sge = &(*sges)[j];
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ } else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ elt->bufs[j] = buf;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ if (j == 0) {
+ /* The first SGE keeps its headroom. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf,
+ char *);
+ sge->length = (buf->buf_len -
+ RTE_PKTMBUF_HEADROOM);
+ } else {
+ /* Subsequent SGEs lose theirs. */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ SET_DATA_OFF(buf, 0);
+ sge->addr = (uintptr_t)buf->buf_addr;
+ sge->length = buf->buf_len;
+ }
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u WRs (%zu segments)",
+ (void *)rxq, elts_n, (elts_n * elemof((*elts)[0].sges)));
+ rxq->elts_n = elts_n;
+ rxq->elts.sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts_sp(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt_sp (*elts)[elts_n] = rxq->elts.sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+}
+
+/**
+ * Allocate RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts(struct rxq *rxq, unsigned int elts_n, struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge *sge = &(*elts)[i].sge;
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ } else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* Configure WR. Work request ID contains its own index in
+ * the elts array and the offset between SGE buffer header and
+ * its data. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)buf->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)buf);
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = sge;
+ wr->num_sge = 1;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ /* SGE keeps its headroom. */
+ sge->addr = (uintptr_t)
+ ((uint8_t *)buf->buf_addr + RTE_PKTMBUF_HEADROOM);
+ sge->length = (buf->buf_len - RTE_PKTMBUF_HEADROOM);
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ /* Make sure elts index and SGE mbuf pointer can be deduced
+ * from WR ID. */
+ if ((WR_ID(wr->wr_id).id != i) ||
+ ((void *)(sge->addr - WR_ID(wr->wr_id).offset) != buf)) {
+ ERROR("%p: cannot store index and offset in WR ID",
+ (void *)rxq);
+ sge->addr = 0;
+ rte_pktmbuf_free(buf);
+ ret = EOVERFLOW;
+ goto error;
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u single-segment WRs",
+ (void *)rxq, elts_n);
+ rxq->elts_n = elts_n;
+ rxq->elts.no_sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt (*elts)[elts_n] = rxq->elts.no_sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.no_sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)(elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+}
+
+/**
+ * Unregister a MAC address from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+rxq_mac_addr_del(struct rxq *rxq, unsigned int mac_index)
+{
+#if defined(NDEBUG) || defined(MLX4_COMPAT_VMWARE)
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+#endif
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(rxq->mac_configured, mac_index)) {
+ assert(rxq->mac_flow[mac_index] == NULL);
+ return;
+ }
+ DEBUG("%p: removing MAC address %02x:%02x:%02x:%02x:%02x:%02x"
+ " index %u",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ claim_zero(ibv_detach_mcast(rxq->qp, &gid, 0));
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+ return;
+ }
+#endif
+ assert(rxq->mac_flow[mac_index] != NULL);
+ claim_zero(ibv_exp_destroy_flow(rxq->mac_flow[mac_index]));
+ rxq->mac_flow[mac_index] = NULL;
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+}
+
+/**
+ * Unregister all MAC addresses from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_mac_addrs_del(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i)
+ rxq_mac_addr_del(rxq, i);
+}
+
+static int rxq_promiscuous_enable(struct rxq *);
+static void rxq_promiscuous_disable(struct rxq *);
+
+/**
+ * Register a MAC address in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addr_add(struct rxq *rxq, unsigned int mac_index)
+{
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+ unsigned int vlans = 0;
+ unsigned int specs = 0;
+ unsigned int i, j;
+ struct ibv_exp_flow *flow;
+
+ assert(mac_index < elemof(priv->mac));
+ if (BITFIELD_ISSET(rxq->mac_configured, mac_index))
+ rxq_mac_addr_del(rxq, mac_index);
+ /* Number of configured VLANs. */
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i)
+ if (priv->vlan_filter[i].enabled)
+ ++vlans;
+ specs = (vlans ? vlans : 1);
+
+ /* Allocate flow specification on the stack. */
+ struct ibv_exp_flow_attr data
+ [1 +
+ (sizeof(struct ibv_exp_flow_spec_eth[specs]) /
+ sizeof(struct ibv_exp_flow_attr)) +
+ !!(sizeof(struct ibv_exp_flow_spec_eth[specs]) %
+ sizeof(struct ibv_exp_flow_attr))];
+ struct ibv_exp_flow_attr *attr = (void *)&data[0];
+ struct ibv_exp_flow_spec_eth *spec = (void *)&data[1];
+
+ /*
+ * No padding must be inserted by the compiler between attr and spec.
+ * This layout is expected by libibverbs.
+ */
+ assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
+ *attr = (struct ibv_exp_flow_attr){
+ .type = IBV_EXP_FLOW_ATTR_NORMAL,
+ .num_of_specs = specs,
+ .port = priv->port,
+ .flags = 0
+ };
+ *spec = (struct ibv_exp_flow_spec_eth){
+ .type = IBV_EXP_FLOW_SPEC_ETH,
+ .size = sizeof(*spec),
+ .val = {
+ .dst_mac = {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ },
+ .mask = {
+ .dst_mac = "\xff\xff\xff\xff\xff\xff",
+ .vlan_tag = (vlans ? htons(0xfff) : 0)
+ }
+ };
+ /* Fill VLAN specifications. */
+ for (i = 0, j = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled)
+ continue;
+ assert(j != vlans);
+ if (j)
+ spec[j] = spec[0];
+ spec[j].val.vlan_tag = htons(priv->vlan_filter[i].id);
+ ++j;
+ }
+ DEBUG("%p: adding MAC address %02x:%02x:%02x:%02x:%02x:%02x index %u"
+ " (%u VLAN(s) configured)",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index,
+ vlans);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ /* Call multicast attach with unicast mac to get traffic. */
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ errno = 0;
+ if (ibv_attach_mcast(rxq->qp, &gid, 0)) {
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+ }
+#endif
+ /* Create related flow. */
+ errno = 0;
+ flow = ibv_exp_create_flow(rxq->qp, attr);
+ if (flow == NULL) {
+ int err = errno;
+
+ /* Flow creation failure is not fatal when in DMFS A0 mode.
+ * Ignore error if promiscuity is already enabled or can be
+ * enabled. */
+ if (priv->promisc_ok)
+ return 0;
+ if ((rxq->promisc_flow != NULL) ||
+ (rxq_promiscuous_enable(rxq) == 0)) {
+ if (rxq->promisc_flow != NULL)
+ rxq_promiscuous_disable(rxq);
+ WARN("cannot configure normal flow but promiscuous"
+ " mode is fine, assuming promiscuous optimization"
+ " is enabled"
+ " (options mlx4_core log_num_mgm_entry_size=-7)");
+ priv->promisc_ok = 1;
+ return 0;
+ }
+ errno = err;
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ assert(rxq->mac_flow[mac_index] == NULL);
+ rxq->mac_flow[mac_index] = flow;
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Register all MAC addresses in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addrs_add(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ ret = rxq_mac_addr_add(rxq, i);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ rxq_mac_addr_del(rxq, --i);
+ assert(ret > 0);
+ return ret;
+ }
+ return 0;
+}
+
+/**
+ * Unregister a MAC address.
+ *
+ * In RSS mode, the MAC address is unregistered from the parent queue,
+ * otherwise it is unregistered from each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+priv_mac_addr_del(struct priv *priv, unsigned int mac_index)
+{
+ unsigned int i;
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(priv->mac_configured, mac_index))
+ return;
+ if (priv->rss) {
+ rxq_mac_addr_del(&priv->rxq_parent, mac_index);
+ goto end;
+ }
+ for (i = 0; (i != priv->dev->data->nb_rx_queues); ++i)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+end:
+ BITFIELD_RESET(priv->mac_configured, mac_index);
+}
+
+/**
+ * Register a MAC address.
+ *
+ * In RSS mode, the MAC address is registered in the parent queue,
+ * otherwise it is registered in each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index to use.
+ * @param mac
+ * MAC address to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+priv_mac_addr_add(struct priv *priv, unsigned int mac_index,
+ const uint8_t (*mac)[ETHER_ADDR_LEN])
+{
+ unsigned int i;
+ int ret;
+
+ assert(mac_index < elemof(priv->mac));
+ /* First, make sure this address isn't already configured. */
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ /* Skip this index, it's going to be reconfigured. */
+ if (i == mac_index)
+ continue;
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ if (memcmp(priv->mac[i].addr_bytes, *mac, sizeof(*mac)))
+ continue;
+ /* Address already configured elsewhere, return with error. */
+ return EADDRINUSE;
+ }
+ if (BITFIELD_ISSET(priv->mac_configured, mac_index))
+ priv_mac_addr_del(priv, mac_index);
+ priv->mac[mac_index] = (struct ether_addr){
+ {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ };
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started) {
+#ifndef NDEBUG
+ /* Verify that all queues have this index disabled. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ assert(!BITFIELD_ISSET
+ ((*priv->rxqs)[i]->mac_configured, mac_index));
+ }
+#endif
+ goto end;
+ }
+ if (priv->rss) {
+ ret = rxq_mac_addr_add(&priv->rxq_parent, mac_index);
+ if (ret)
+ return ret;
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_mac_addr_add((*priv->rxqs)[i], mac_index);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[(--i)] != NULL)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+ return ret;
+ }
+end:
+ BITFIELD_SET(priv->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Enable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_allmulticast_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_MC_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ DEBUG("%p: enabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ flow = ibv_exp_create_flow(rxq->qp, &attr);
+ if (flow == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->allmulti_flow = flow;
+ DEBUG("%p: allmulticast mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_allmulticast_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ DEBUG("%p: disabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->allmulti_flow));
+ rxq->allmulti_flow = NULL;
+ DEBUG("%p: allmulticast mode disabled", (void *)rxq);
+}
+
+/**
+ * Enable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_promiscuous_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_ALL_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ if (rxq->priv->vf)
+ return 0;
+ DEBUG("%p: enabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ flow = ibv_exp_create_flow(rxq->qp, &attr);
+ if (flow == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->promisc_flow = flow;
+ DEBUG("%p: promiscuous mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_promiscuous_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ if (rxq->priv->vf)
+ return;
+ DEBUG("%p: disabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->promisc_flow));
+ rxq->promisc_flow = NULL;
+ DEBUG("%p: promiscuous mode disabled", (void *)rxq);
+}
+
+/**
+ * Clean up a RX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_cleanup(struct rxq *rxq)
+{
+ DEBUG("cleaning up %p", (void *)rxq);
+ if (rxq->sp)
+ rxq_free_elts_sp(rxq);
+ else
+ rxq_free_elts(rxq);
+ if (rxq->qp != NULL) {
+ rxq_promiscuous_disable(rxq);
+ rxq_allmulticast_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ claim_zero(ibv_destroy_qp(rxq->qp));
+ }
+ if (rxq->cq != NULL)
+ claim_zero(ibv_destroy_cq(rxq->cq));
+ if (rxq->mr != NULL)
+ claim_zero(ibv_dereg_mr(rxq->mr));
+ memset(rxq, 0, sizeof(*rxq));
+}
+
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n);
+
+/**
+ * DPDK callback for RX with scattered packets support.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst_sp(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(!rxq->sp))
+ return mlx4_rx_burst(dpdk_rxq, pkts, pkts_n);
+ if (unlikely(elts == NULL)) /* See RTE_DEV_CMD_SET_MTU. */
+ return 0;
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt_sp *elt = &(*elts)[wr_id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *pkt_buf = NULL; /* Buffer returned in pkts. */
+ struct rte_mbuf **pkt_buf_next = &pkt_buf;
+ unsigned int seg_headroom = RTE_PKTMBUF_HEADROOM;
+ unsigned int j = 0;
+
+ /* Sanity checks. */
+ assert(wr_id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == elt->sges);
+ assert(wr->num_sge == elemof(elt->sges));
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, wc->wr_id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Replace spent segments with new ones, concatenate and
+ * return them as pkt_buf.
+ */
+ while (1) {
+ struct ibv_sge *sge = &elt->sges[j];
+ struct rte_mbuf *seg = elt->bufs[j];
+ struct rte_mbuf *rep;
+ unsigned int seg_tailroom;
+
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, wr_id);
+ if (pkt_buf != NULL)
+ rte_pktmbuf_free(pkt_buf);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+#ifndef NDEBUG
+ /* Poison user-modifiable fields in rep. */
+ NEXT(rep) = (void *)((uintptr_t)-1);
+ SET_DATA_OFF(rep, 0xdead);
+ DATA_LEN(rep) = 0xd00d;
+ PKT_LEN(rep) = 0xdeadd00d;
+ NB_SEGS(rep) = 0x2a;
+ PORT(rep) = 0x2a;
+ rep->ol_flags = -1;
+#endif
+ assert(rep->buf_len == seg->buf_len);
+ assert(rep->buf_len == rxq->mb_len);
+ /* Reconfigure sge to use rep instead of seg. */
+ assert(sge->lkey == rxq->mr->lkey);
+ sge->addr = ((uintptr_t)rep->buf_addr + seg_headroom);
+ elt->bufs[j] = rep;
+ ++j;
+ /* Update pkt_buf if it's the first segment, or link
+ * seg to the previous one and update pkt_buf_next. */
+ *pkt_buf_next = seg;
+ pkt_buf_next = &NEXT(seg);
+ /* Update seg information. */
+ seg_tailroom = (seg->buf_len - seg_headroom);
+ assert(sge->length == seg_tailroom);
+ SET_DATA_OFF(seg, seg_headroom);
+ if (likely(len <= seg_tailroom)) {
+ /* Last segment. */
+ DATA_LEN(seg) = len;
+ PKT_LEN(seg) = len;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) ==
+ seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) ==
+ (seg_tailroom - len));
+ break;
+ }
+ DATA_LEN(seg) = seg_tailroom;
+ PKT_LEN(seg) = seg_tailroom;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) == seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) == 0);
+ /* Fix len and clear headroom for next segments. */
+ len -= seg_tailroom;
+ seg_headroom = 0;
+ }
+ /* Update head and tail segments. */
+ *pkt_buf_next = NULL;
+ assert(pkt_buf != NULL);
+ assert(j != 0);
+ NB_SEGS(pkt_buf) = j;
+ PORT(pkt_buf) = rxq->port_id;
+ PKT_LEN(pkt_buf) = wc->byte_len;
+ pkt_buf->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = pkt_buf;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu64 " (%p)",
+ (void *)rxq, wcs_n, wcs[0].wr_id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+/**
+ * DPDK callback for RX.
+ *
+ * The following function is the same as mlx4_rx_burst_sp(), except it doesn't
+ * manage scattered packets. Improves performance when MRU is lower than the
+ * size of the first segment.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(rxq->sp))
+ return mlx4_rx_burst_sp(dpdk_rxq, pkts, pkts_n);
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt *elt = &(*elts)[WR_ID(wr_id).id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *seg =
+ (void *)(elt->sge.addr - WR_ID(wr_id).offset);
+ struct rte_mbuf *rep;
+
+ /* Sanity checks. */
+ assert(WR_ID(wr_id).id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == &elt->sge);
+ assert(wr->num_sge == 1);
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, WR_ID(wr_id).id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, WR_ID(wr_id).id);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+
+ /* Reconfigure sge to use rep instead of seg. */
+ elt->sge.addr = (uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM;
+ assert(elt->sge.lkey == rxq->mr->lkey);
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)rep);
+ assert(WR_ID(wr->wr_id).id == WR_ID(wr_id).id);
+
+ /* Update seg information. */
+ SET_DATA_OFF(seg, RTE_PKTMBUF_HEADROOM);
+ NB_SEGS(seg) = 1;
+ PORT(seg) = rxq->port_id;
+ NEXT(seg) = NULL;
+ PKT_LEN(seg) = len;
+ DATA_LEN(seg) = len;
+ seg->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = seg;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu32 " (%p)",
+ (void *)rxq, wcs_n, WR_ID(wcs[0].wr_id).id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+#ifdef INLINE_RECV
+
+/**
+ * Allocate a Queue Pair in case inline receive is supported.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .max_inl_recv = priv->inl_recv_size,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .pd = priv->pd
+ };
+
+ attr.comp_mask = IBV_EXP_QP_INIT_ATTR_PD;
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#else /* INLINE_RECV */
+
+/**
+ * Allocate a Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET
+ };
+
+ return ibv_create_qp(priv->pd, &attr);
+}
+
+#endif /* INLINE_RECV */
+
+#ifdef RSS_SUPPORT
+
+/**
+ * Allocate a RSS Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ * @param parent
+ * If nonzero, create a parent QP, otherwise a child.
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp_rss(struct priv *priv, struct ibv_cq *cq, uint16_t desc,
+ int parent)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+#ifdef INLINE_RECV
+ .max_inl_recv = priv->inl_recv_size,
+#endif
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .comp_mask = (IBV_EXP_QP_INIT_ATTR_PD |
+ IBV_EXP_QP_INIT_ATTR_QPG),
+ .pd = priv->pd
+ };
+
+#ifdef INLINE_RECV
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+#endif
+ if (parent) {
+ attr.qpg.qpg_type = IBV_EXP_QPG_PARENT;
+ /* TSS isn't necessary. */
+ attr.qpg.parent_attrib.tss_child_count = 0;
+ attr.qpg.parent_attrib.rss_child_count = priv->rxqs_n;
+ DEBUG("initializing parent RSS queue");
+ } else {
+ attr.qpg.qpg_type = IBV_EXP_QPG_CHILD_RX;
+ attr.qpg.qpg_parent = priv->rxq_parent.qp;
+ DEBUG("initializing child RSS queue");
+ }
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#endif /* RSS_SUPPORT */
+
+/**
+ * Reconfigure a RX queue with new parameters.
+ *
+ * rxq_rehash() does not allocate mbufs, which, if not done from the right
+ * thread (such as a control thread), may corrupt the pool.
+ * In case of failure, the queue is left untouched.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * RX queue pointer.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ struct rxq tmpl = *rxq;
+ unsigned int mbuf_n;
+ unsigned int desc_n;
+ struct rte_mbuf **pool;
+ unsigned int i, k;
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ int err;
+ int parent = (rxq == &priv->rxq_parent);
+
+ if (parent) {
+ ERROR("%p: cannot rehash parent queue %p",
+ (void *)dev, (void *)rxq);
+ return EINVAL;
+ }
+ DEBUG("%p: rehashing queue %p", (void *)dev, (void *)rxq);
+ /* Number of descriptors and mbufs currently allocated. */
+ desc_n = (tmpl.elts_n * (tmpl.sp ? MLX4_PMD_SGE_WR_N : 1));
+ mbuf_n = desc_n;
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc_n /= MLX4_PMD_SGE_WR_N;
+ } else
+ tmpl.sp = 0;
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc_n);
+ /* If scatter mode is the same as before, nothing to do. */
+ if (tmpl.sp == rxq->sp) {
+ DEBUG("%p: nothing to do", (void *)dev);
+ return 0;
+ }
+ /* Remove attached flows if RSS is disabled (no parent queue). */
+ if (!priv->rss) {
+ rxq_allmulticast_disable(&tmpl);
+ rxq_promiscuous_disable(&tmpl);
+ rxq_mac_addrs_del(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* From now on, any failure will render the queue unusable.
+ * Reinitialize QP. */
+ mod = (struct ibv_exp_qp_attr){ .qp_state = IBV_QPS_RESET };
+ err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE);
+ if (err) {
+ ERROR("%p: cannot reset QP: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ err = ibv_resize_cq(tmpl.cq, desc_n);
+ if (err) {
+ ERROR("%p: cannot resize CQ: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ err = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT));
+ if (err) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ };
+ /* Reconfigure flows. Do not care for errors. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(&tmpl);
+ if (priv->promisc)
+ rxq_promiscuous_enable(&tmpl);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* Allocate pool. */
+ pool = rte_malloc(__func__, (mbuf_n * sizeof(*pool)), 0);
+ if (pool == NULL) {
+ ERROR("%p: cannot allocate memory", (void *)dev);
+ return ENOBUFS;
+ }
+ /* Snatch mbufs from original queue. */
+ k = 0;
+ if (rxq->sp) {
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ unsigned int j;
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ assert(elt->bufs[j] != NULL);
+ pool[k++] = elt->bufs[j];
+ }
+ }
+ } else {
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ pool[k++] = buf;
+ }
+ }
+ assert(k == mbuf_n);
+ tmpl.elts_n = 0;
+ tmpl.elts.sp = NULL;
+ assert((void *)&tmpl.elts.sp == (void *)&tmpl.elts.no_sp);
+ err = ((tmpl.sp) ?
+ rxq_alloc_elts_sp(&tmpl, desc_n, pool) :
+ rxq_alloc_elts(&tmpl, desc_n, pool));
+ if (err) {
+ ERROR("%p: cannot reallocate WRs, aborting", (void *)dev);
+ rte_free(pool);
+ assert(err > 0);
+ return err;
+ }
+ assert(tmpl.elts_n == desc_n);
+ assert(tmpl.elts.sp != NULL);
+ rte_free(pool);
+ /* Clean up original data. */
+ rxq->elts_n = 0;
+ rte_free(rxq->elts.sp);
+ rxq->elts.sp = NULL;
+ /* Post WRs. */
+ err = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr);
+ if (err) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(err));
+ goto skip_rtr;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE);
+ if (err)
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(err));
+skip_rtr:
+ *rxq = tmpl;
+ assert(err >= 0);
+ return err;
+}
+
+/**
+ * Configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq tmpl = {
+ .priv = priv,
+ .mp = mp,
+ .socket = socket
+ };
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ struct rte_mbuf *buf;
+ int ret = 0;
+ int parent = (rxq == &priv->rxq_parent);
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ /*
+ * If this is a parent queue, hardware must support RSS and
+ * RSS must be enabled.
+ */
+ assert((!parent) || ((priv->hw_rss) && (priv->rss)));
+ if (parent) {
+ /* Even if unused, ibv_create_cq() requires at least one
+ * descriptor. */
+ desc = 1;
+ goto skip_mr;
+ }
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of RX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ /* Get mbuf length. */
+ buf = rte_pktmbuf_alloc(mp);
+ if (buf == NULL) {
+ ERROR("%p: unable to allocate mbuf", (void *)dev);
+ return ENOMEM;
+ }
+ tmpl.mb_len = buf->buf_len;
+ assert((rte_pktmbuf_headroom(buf) +
+ rte_pktmbuf_tailroom(buf)) == tmpl.mb_len);
+ assert(rte_pktmbuf_headroom(buf) == RTE_PKTMBUF_HEADROOM);
+ rte_pktmbuf_free(buf);
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc /= MLX4_PMD_SGE_WR_N;
+ }
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc);
+ /* Use the entire RX mempool as the memory region. */
+ tmpl.mr = ibv_reg_mr(priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE |
+ IBV_ACCESS_REMOTE_WRITE));
+ if (tmpl.mr == NULL) {
+ ret = EINVAL;
+ ERROR("%p: MR creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+skip_mr:
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+#ifdef RSS_SUPPORT
+ if (priv->rss)
+ tmpl.qp = rxq_setup_qp_rss(priv, tmpl.cq, desc, parent);
+ else
+#endif /* RSS_SUPPORT */
+ tmpl.qp = rxq_setup_qp(priv, tmpl.cq, desc);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ ret = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT));
+ if (ret) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((parent) || (!priv->rss)) {
+ /* Configure MAC and broadcast addresses. */
+ ret = rxq_mac_addrs_add(&tmpl);
+ if (ret) {
+ ERROR("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ }
+ /* Allocate descriptors for RX queues, except for the RSS parent. */
+ if (parent)
+ goto skip_alloc;
+ if (tmpl.sp)
+ ret = rxq_alloc_elts_sp(&tmpl, desc, NULL);
+ else
+ ret = rxq_alloc_elts(&tmpl, desc, NULL);
+ if (ret) {
+ ERROR("%p: RXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ ret = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr);
+ if (ret) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(ret));
+ goto error;
+ }
+skip_alloc:
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ ret = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE);
+ if (ret) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Save port ID. */
+ tmpl.port_id = dev->data->port_id;
+ DEBUG("%p: RTE port ID: %u", (void *)rxq, tmpl.port_id);
+ /* Clean up rxq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old rxq just in case", (void *)rxq);
+ rxq_cleanup(rxq);
+ *rxq = tmpl;
+ DEBUG("%p: rxq updated with %p", (void *)rxq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ rxq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq *rxq = (*priv->rxqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->rxqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->rxqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (rxq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)rxq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->rxqs)[idx] = NULL;
+ rxq_cleanup(rxq);
+ } else {
+ rxq = rte_calloc_socket("RXQ", 1, sizeof(*rxq), 0, socket);
+ if (rxq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = rxq_setup(dev, rxq, desc, socket, conf, mp);
+ if (ret)
+ rte_free(rxq);
+ else {
+ rxq->stats.idx = idx;
+ DEBUG("%p: adding RX queue %p to list",
+ (void *)dev, (void *)rxq);
+ (*priv->rxqs)[idx] = rxq;
+ /* Update receive callback. */
+ if (rxq->sp)
+ dev->rx_pkt_burst = mlx4_rx_burst_sp;
+ else
+ dev->rx_pkt_burst = mlx4_rx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a RX queue.
+ *
+ * @param dpdk_rxq
+ * Generic RX queue pointer.
+ */
+static void
+mlx4_rx_queue_release(void *dpdk_rxq)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (rxq == NULL)
+ return;
+ priv = rxq->priv;
+ priv_lock(priv);
+ assert(rxq != &priv->rxq_parent);
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] == rxq) {
+ DEBUG("%p: removing RX queue %p from list",
+ (void *)priv->dev, (void *)rxq);
+ (*priv->rxqs)[i] = NULL;
+ break;
+ }
+ rxq_cleanup(rxq);
+ rte_free(rxq);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * Simulate device start by attaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_start(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (priv->started) {
+ priv_unlock(priv);
+ return 0;
+ }
+ DEBUG("%p: attaching configured flows to all RX queues", (void *)dev);
+ priv->started = 1;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ } else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ int ret;
+
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ ret = rxq_mac_addrs_add(rxq);
+ if (!ret && priv->promisc)
+ ret = rxq_promiscuous_enable(rxq);
+ if (!ret && priv->allmulti)
+ ret = rxq_allmulticast_enable(rxq);
+ if (!ret)
+ continue;
+ WARN("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ /* Rollback. */
+ while (i != 0) {
+ rxq = (*priv->rxqs)[--i];
+ if (rxq != NULL) {
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ }
+ priv->started = 0;
+ return -ret;
+ } while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+ return 0;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * Simulate device stop by detaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_stop(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (!priv->started) {
+ priv_unlock(priv);
+ return;
+ }
+ DEBUG("%p: detaching flows from all RX queues", (void *)dev);
+ priv->started = 0;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ } else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ } while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+}
+
+/**
+ * Dummy DPDK callback for TX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_txq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * Dummy DPDK callback for RX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+removed_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_rxq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * Destroy all queues and objects, free memory.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_close(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ void *tmp;
+ unsigned int i;
+
+ priv_lock(priv);
+ DEBUG("%p: closing device \"%s\"",
+ (void *)dev,
+ ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
+ /* Prevent crashes when queues are still in use. This is unfortunately
+ * still required for DPDK 1.3 because some programs (such as testpmd)
+ * never release them before closing the device. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ dev->tx_pkt_burst = removed_tx_burst;
+ if (priv->rxqs != NULL) {
+ /* XXX race condition if mlx4_rx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ tmp = (*priv->rxqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->rxqs)[i] = NULL;
+ rxq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->rxqs_n = 0;
+ priv->rxqs = NULL;
+ }
+ if (priv->txqs != NULL) {
+ /* XXX race condition if mlx4_tx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ tmp = (*priv->txqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->txqs)[i] = NULL;
+ txq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->txqs_n = 0;
+ priv->txqs = NULL;
+ }
+ if (priv->rss)
+ rxq_cleanup(&priv->rxq_parent);
+ if (priv->pd != NULL) {
+ assert(priv->ctx != NULL);
+ claim_zero(ibv_dealloc_pd(priv->pd));
+ claim_zero(ibv_close_device(priv->ctx));
+ } else
+ assert(priv->ctx == NULL);
+ priv_unlock(priv);
+ memset(priv, 0, sizeof(*priv));
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+static void
+mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int max;
+
+ priv_lock(priv);
+ /* FIXME: we should ask the device for these values. */
+ info->min_rx_bufsize = 32;
+ info->max_rx_pktlen = 65536;
+ /*
+ * Since we need one CQ per QP, the limit is the minimum number
+ * between the two values.
+ */
+ max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
+ priv->device_attr.max_qp : priv->device_attr.max_cq);
+ /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
+ if (max >= 65535)
+ max = 65535;
+ info->max_rx_queues = max;
+ info->max_tx_queues = max;
+ info->max_mac_addrs = elemof(priv->mac);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to get device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] stats
+ * Stats structure output buffer.
+ */
+static void
+mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rte_eth_stats tmp = { .ipackets = 0 };
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ /* Add software counters. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+
+ if (rxq == NULL)
+ continue;
+ idx = rxq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_ipackets[idx] += rxq->stats.ipackets;
+ tmp.q_ibytes[idx] += rxq->stats.ibytes;
+#endif
+ tmp.q_errors[idx] += (rxq->stats.idropped +
+ rxq->stats.rx_nombuf);
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.ipackets += rxq->stats.ipackets;
+ tmp.ibytes += rxq->stats.ibytes;
+#endif
+ tmp.ierrors += rxq->stats.idropped;
+ tmp.rx_nombuf += rxq->stats.rx_nombuf;
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ struct txq *txq = (*priv->txqs)[i];
+
+ if (txq == NULL)
+ continue;
+ idx = txq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_opackets[idx] += txq->stats.opackets;
+ tmp.q_obytes[idx] += txq->stats.obytes;
+#endif
+ tmp.q_errors[idx] += txq->stats.odropped;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.opackets += txq->stats.opackets;
+ tmp.obytes += txq->stats.obytes;
+#endif
+ tmp.oerrors += txq->stats.odropped;
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: retrieve and add hardware counters. */
+#endif
+ *stats = tmp;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to clear device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_stats_reset(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->rxqs)[i]->stats =
+ (struct mlx4_rxq_stats){ .idx = idx };
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ if ((*priv->txqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->txqs)[i]->stats =
+ (struct mlx4_txq_stats){ .idx = idx };
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: reset hardware counters. */
+#endif
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to remove a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param index
+ * MAC address index.
+ */
+static void
+mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ priv_lock(priv);
+ DEBUG("%p: removing MAC address from index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to remove the broadcast address, this one is special. */
+ if (!memcmp(priv->mac[index].addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_del(priv, index);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to add a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param mac_addr
+ * MAC address to register.
+ * @param index
+ * MAC address index.
+ * @param vmdq
+ * VMDq pool index to associate address with (ignored).
+ */
+static void
+mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, uint32_t vmdq)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ (void)vmdq;
+ priv_lock(priv);
+ DEBUG("%p: adding MAC address at index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to add the broadcast address, this one is special. */
+ if (!memcmp(mac_addr->addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_add(priv, index,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac_addr->addr_bytes);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_promiscuous_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_promiscuous_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->promisc = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_promiscuous_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+end:
+ priv->promisc = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_allmulticast_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_allmulticast_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->allmulti = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_allmulticast_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+end:
+ priv->allmulti = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to retrieve physical link information (unlocked version).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ibv_port_attr port_attr;
+ static const uint8_t width_mult[] = {
+ /* Multiplier values taken from devinfo.c in libibverbs. */
+ 0, 1, 4, 0, 8, 0, 0, 0, 12, 0
+ };
+
+ (void)wait_to_complete;
+ errno = ibv_query_port(priv->ctx, priv->port, &port_attr);
+ if (errno) {
+ WARN("port query failed: %s", strerror(errno));
+ return -1;
+ }
+ dev->data->dev_link = (struct rte_eth_link){
+ .link_speed = (ibv_rate_to_mbps(mult_to_ibv_rate
+ (port_attr.active_speed)) *
+ width_mult[(port_attr.active_width %
+ sizeof(width_mult))]),
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = (port_attr.state == IBV_PORT_ACTIVE)
+ };
+ if (memcmp(&port_attr, &priv->port_attr, sizeof(port_attr))) {
+ /* Link status changed. */
+ priv->port_attr = port_attr;
+ return 0;
+ }
+ /* Link status is still the same. */
+ return -1;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = mlx4_link_update_unlocked(dev, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
+ * received). Use this as a hint to enable/disable scattered packets support
+ * and improve performance when not needed.
+ * Since failure is not an option, reconfiguring queues on the fly is not
+ * recommended.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param in_mtu
+ * New MTU.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret = 0;
+ unsigned int i;
+ uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
+ mlx4_rx_burst;
+
+ priv_lock(priv);
+ /* Set kernel interface MTU first. */
+ if (priv_set_mtu(priv, mtu)) {
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
+ goto out;
+ } else
+ DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ priv->mtu = mtu;
+ /* Temporarily replace RX handler with a fake one, assuming it has not
+ * been copied elsewhere. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ /* Make sure everyone has left mlx4_rx_burst() and uses
+ * removed_rx_burst() instead. */
+ rte_wmb();
+ usleep(1000);
+ /* Reconfigure each RX queue. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+ unsigned int max_frame_len;
+ int sp;
+
+ if (rxq == NULL)
+ continue;
+ /* Calculate new maximum frame length according to MTU and
+ * toggle scattered support (sp) if necessary. */
+ max_frame_len = (priv->mtu + ETHER_HDR_LEN +
+ (ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
+ sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
+ /* Provide new values to rxq_setup(). */
+ dev->data->dev_conf.rxmode.jumbo_frame = sp;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
+ ret = rxq_rehash(dev, rxq);
+ if (ret) {
+ /* Force SP RX if that queue requires it and abort. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ break;
+ }
+ /* Reenable non-RSS queue attributes. No need to check
+ * for errors at this stage. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(rxq);
+ if (priv->promisc)
+ rxq_promiscuous_enable(rxq);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(rxq);
+ }
+ /* Scattered burst function takes priority. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ }
+ /* Burst functions can now be called again. */
+ rte_wmb();
+ dev->rx_pkt_burst = rx_func;
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ * Flow control output buffer.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_GPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+
+ fc_conf->autoneg = ethpause.autoneg;
+ if (ethpause.rx_pause && ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (ethpause.rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ * Flow control parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_SPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ ethpause.autoneg = fc_conf->autoneg;
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ ethpause.rx_pause = 1;
+ else
+ ethpause.rx_pause = 0;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ ethpause.tx_pause = 1;
+ else
+ ethpause.tx_pause = 0;
+
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * Configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int j = -1;
+
+ DEBUG("%p: %s VLAN filter ID %" PRIu16,
+ (void *)dev, (on ? "enable" : "disable"), vlan_id);
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled) {
+ /* Unused index, remember it. */
+ j = i;
+ continue;
+ }
+ if (priv->vlan_filter[i].id != vlan_id)
+ continue;
+ /* This VLAN ID is already known, use its index. */
+ j = i;
+ break;
+ }
+ /* Check if there's room for another VLAN filter. */
+ if (j == (unsigned int)-1)
+ return ENOMEM;
+ /*
+ * VLAN filters apply to all configured MAC addresses, flow
+ * specifications must be reconfigured accordingly.
+ */
+ priv->vlan_filter[j].id = vlan_id;
+ if ((on) && (!priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is disabled, enable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 1;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ } else if ((!on) && (priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is enabled, disable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 0;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * DPDK callback to configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = vlan_filter_set(dev, vlan_id, on);
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+static struct eth_dev_ops mlx4_dev_ops = {
+ .dev_configure = mlx4_dev_configure,
+ .dev_start = mlx4_dev_start,
+ .dev_stop = mlx4_dev_stop,
+ .dev_close = mlx4_dev_close,
+ .promiscuous_enable = mlx4_promiscuous_enable,
+ .promiscuous_disable = mlx4_promiscuous_disable,
+ .allmulticast_enable = mlx4_allmulticast_enable,
+ .allmulticast_disable = mlx4_allmulticast_disable,
+ .link_update = mlx4_link_update,
+ .stats_get = mlx4_stats_get,
+ .stats_reset = mlx4_stats_reset,
+ .queue_stats_mapping_set = NULL,
+ .dev_infos_get = mlx4_dev_infos_get,
+ .vlan_filter_set = mlx4_vlan_filter_set,
+ .vlan_tpid_set = NULL,
+ .vlan_strip_queue_set = NULL,
+ .vlan_offload_set = NULL,
+ .rx_queue_setup = mlx4_rx_queue_setup,
+ .tx_queue_setup = mlx4_tx_queue_setup,
+ .rx_queue_release = mlx4_rx_queue_release,
+ .tx_queue_release = mlx4_tx_queue_release,
+ .dev_led_on = NULL,
+ .dev_led_off = NULL,
+ .flow_ctrl_get = mlx4_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx4_dev_set_flow_ctrl,
+ .priority_flow_ctrl_set = NULL,
+ .mac_addr_remove = mlx4_mac_addr_remove,
+ .mac_addr_add = mlx4_mac_addr_add,
+ .mtu_set = mlx4_dev_set_mtu,
+ .fdir_add_signature_filter = NULL,
+ .fdir_update_signature_filter = NULL,
+ .fdir_remove_signature_filter = NULL,
+ .fdir_add_perfect_filter = NULL,
+ .fdir_update_perfect_filter = NULL,
+ .fdir_remove_perfect_filter = NULL,
+ .fdir_set_masks = NULL
+};
+
+/**
+ * Get PCI information from struct ibv_device.
+ *
+ * @param device
+ * Pointer to Ethernet device structure.
+ * @param[out] pci_addr
+ * PCI bus address output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+mlx4_ibv_device_to_pci_addr(const struct ibv_device *device,
+ struct rte_pci_addr *pci_addr)
+{
+ FILE *file;
+ char line[32];
+ MKSTR(path, "%s/device/uevent", device->ibdev_path);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ while (fgets(line, sizeof(line), file) == line) {
+ size_t len = strlen(line);
+ int ret;
+
+ /* Truncate long lines. */
+ if (len == (sizeof(line) - 1))
+ while (line[(len - 1)] != '\n') {
+ ret = fgetc(file);
+ if (ret == EOF)
+ break;
+ line[(len - 1)] = ret;
+ }
+ /* Extract information. */
+ if (sscanf(line,
+ "PCI_SLOT_NAME="
+ "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+ &pci_addr->domain,
+ &pci_addr->bus,
+ &pci_addr->devid,
+ &pci_addr->function) == 4) {
+ ret = 0;
+ break;
+ }
+ }
+ fclose(file);
+ return 0;
+}
+
+/**
+ * Derive MAC address from port GID.
+ *
+ * @param[out] mac
+ * MAC address output buffer.
+ * @param port
+ * Physical port number.
+ * @param[in] gid
+ * Port GID.
+ */
+static void
+mac_from_gid(uint8_t (*mac)[ETHER_ADDR_LEN], uint32_t port, uint8_t *gid)
+{
+ memcpy(&(*mac)[0], gid + 8, 3);
+ memcpy(&(*mac)[3], gid + 13, 3);
+ if (port == 1)
+ (*mac)[0] ^= 2;
+}
+
+/* Support up to 32 adapters. */
+static struct {
+ struct rte_pci_addr pci_addr; /* associated PCI address */
+ uint32_t ports; /* physical ports bitfield. */
+} mlx4_dev[32];
+
+/**
+ * Get device index in mlx4_dev[] from PCI bus address.
+ *
+ * @param[in] pci_addr
+ * PCI bus address to look for.
+ *
+ * @return
+ * mlx4_dev[] index on success, -1 on failure.
+ */
+static int
+mlx4_dev_idx(struct rte_pci_addr *pci_addr)
+{
+ unsigned int i;
+ int ret = -1;
+
+ assert(pci_addr != NULL);
+ for (i = 0; (i != elemof(mlx4_dev)); ++i) {
+ if ((mlx4_dev[i].pci_addr.domain == pci_addr->domain) &&
+ (mlx4_dev[i].pci_addr.bus == pci_addr->bus) &&
+ (mlx4_dev[i].pci_addr.devid == pci_addr->devid) &&
+ (mlx4_dev[i].pci_addr.function == pci_addr->function))
+ return i;
+ if ((mlx4_dev[i].ports == 0) && (ret == -1))
+ ret = i;
+ }
+ return ret;
+}
+
+/**
+ * Retrieve integer value from environment variable.
+ *
+ * @param[in] name
+ * Environment variable name.
+ *
+ * @return
+ * Integer value, 0 if the variable is not set.
+ */
+static int
+mlx4_getenv_int(const char *name)
+{
+ const char *val = getenv(name);
+
+ if (val == NULL)
+ return 0;
+ return atoi(val);
+}
+
+static struct eth_driver mlx4_driver;
+
+/**
+ * DPDK callback to register a PCI device.
+ *
+ * This function creates an Ethernet device for each port of a given
+ * PCI device.
+ *
+ * @param[in] pci_drv
+ * PCI driver structure (mlx4_driver).
+ * @param[in] pci_dev
+ * PCI device information.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_pci_devinit(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+{
+ struct ibv_device **list;
+ struct ibv_device *ibv_dev;
+ int err = 0;
+ struct ibv_context *attr_ctx = NULL;
+ struct ibv_device_attr device_attr;
+ unsigned int vf;
+ int idx;
+ int i;
+
+ (void)pci_drv;
+ assert(pci_drv == &mlx4_driver.pci_drv);
+ /* Get mlx4_dev[] index. */
+ idx = mlx4_dev_idx(&pci_dev->addr);
+ if (idx == -1) {
+ ERROR("this driver cannot support any more adapters");
+ return -ENOMEM;
+ }
+ DEBUG("using driver device index %d", idx);
+
+ /* Save PCI address. */
+ mlx4_dev[idx].pci_addr = pci_dev->addr;
+ list = ibv_get_device_list(&i);
+ if (list == NULL) {
+ assert(errno);
+ return -errno;
+ }
+ assert(i >= 0);
+ /*
+ * For each listed device, check related sysfs entry against
+ * the provided PCI ID.
+ */
+ while (i != 0) {
+ struct rte_pci_addr pci_addr;
+
+ --i;
+ DEBUG("checking device \"%s\"", list[i]->name);
+ if (mlx4_ibv_device_to_pci_addr(list[i], &pci_addr))
+ continue;
+ if ((pci_dev->addr.domain != pci_addr.domain) ||
+ (pci_dev->addr.bus != pci_addr.bus) ||
+ (pci_dev->addr.devid != pci_addr.devid) ||
+ (pci_dev->addr.function != pci_addr.function))
+ continue;
+ vf = (pci_dev->id.device_id ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF);
+ INFO("PCI information matches, using device \"%s\" (VF: %s)",
+ list[i]->name, (vf ? "true" : "false"));
+ attr_ctx = ibv_open_device(list[i]);
+ err = errno;
+ break;
+ }
+ if (attr_ctx == NULL) {
+ if (err == 0)
+ err = ENODEV;
+ ibv_free_device_list(list);
+ assert(err > 0);
+ return -err;
+ }
+ ibv_dev = list[i];
+
+ DEBUG("device opened");
+ if (ibv_query_device(attr_ctx, &device_attr))
+ goto error;
+ INFO("%u port(s) detected", device_attr.phys_port_cnt);
+
+ for (i = 0; i < device_attr.phys_port_cnt; i++) {
+ uint32_t port = i + 1; /* ports are indexed from one */
+ uint32_t test = (1 << i);
+ struct ibv_context *ctx = NULL;
+ struct ibv_port_attr port_attr;
+ struct ibv_pd *pd = NULL;
+ struct priv *priv = NULL;
+ struct rte_eth_dev *eth_dev;
+#if defined(INLINE_RECV) || defined(RSS_SUPPORT)
+ struct ibv_exp_device_attr exp_device_attr;
+#endif
+ struct ether_addr mac;
+ union ibv_gid temp_gid;
+
+#ifdef RSS_SUPPORT
+ exp_device_attr.comp_mask =
+ (IBV_EXP_DEVICE_ATTR_EXP_CAP_FLAGS |
+ IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ);
+#endif /* RSS_SUPPORT */
+
+ DEBUG("using port %u (%08" PRIx32 ")", port, test);
+
+ ctx = ibv_open_device(ibv_dev);
+ if (ctx == NULL)
+ goto port_error;
+
+ /* Check port status. */
+ err = ibv_query_port(ctx, port, &port_attr);
+ if (err) {
+ ERROR("port query failed: %s", strerror(err));
+ goto port_error;
+ }
+ if (port_attr.state != IBV_PORT_ACTIVE)
+ WARN("bad state for port %d: \"%s\" (%d)",
+ port, ibv_port_state_str(port_attr.state),
+ port_attr.state);
+
+ /* Allocate protection domain. */
+ pd = ibv_alloc_pd(ctx);
+ if (pd == NULL) {
+ ERROR("PD allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ mlx4_dev[idx].ports |= test;
+
+ /* from rte_ethdev.c */
+ priv = rte_zmalloc("ethdev private structure",
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ ERROR("priv allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ priv->ctx = ctx;
+ priv->device_attr = device_attr;
+ priv->port_attr = port_attr;
+ priv->port = port;
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+#ifdef RSS_SUPPORT
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("experimental ibv_exp_query_device");
+ goto port_error;
+ }
+ if ((exp_device_attr.exp_device_cap_flags &
+ IBV_EXP_DEVICE_QPG) &&
+ (exp_device_attr.exp_device_cap_flags &
+ IBV_EXP_DEVICE_UD_RSS) &&
+ (exp_device_attr.comp_mask &
+ IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ) &&
+ (exp_device_attr.max_rss_tbl_sz > 0)) {
+ priv->hw_qpg = 1;
+ priv->hw_rss = 1;
+ priv->max_rss_tbl_sz = exp_device_attr.max_rss_tbl_sz;
+ } else {
+ priv->hw_qpg = 0;
+ priv->hw_rss = 0;
+ priv->max_rss_tbl_sz = 0;
+ }
+ priv->hw_tss = !!(exp_device_attr.exp_device_cap_flags &
+ IBV_EXP_DEVICE_UD_TSS);
+ DEBUG("device flags: %s%s%s",
+ (priv->hw_qpg ? "IBV_DEVICE_QPG " : ""),
+ (priv->hw_tss ? "IBV_DEVICE_TSS " : ""),
+ (priv->hw_rss ? "IBV_DEVICE_RSS " : ""));
+ if (priv->hw_rss)
+ DEBUG("maximum RSS indirection table size: %u",
+ exp_device_attr.max_rss_tbl_sz);
+#endif /* RSS_SUPPORT */
+
+#ifdef INLINE_RECV
+ priv->inl_recv_size = mlx4_getenv_int("MLX4_INLINE_RECV_SIZE");
+
+ if (priv->inl_recv_size) {
+ exp_device_attr.comp_mask =
+ IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ;
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("Couldn't query device for inline-receive"
+ " capabilities.");
+ priv->inl_recv_size = 0;
+ } else {
+ if ((unsigned)exp_device_attr.inline_recv_sz <
+ priv->inl_recv_size) {
+ INFO("Max inline-receive (%d) <"
+ " requested inline-receive (%u)",
+ exp_device_attr.inline_recv_sz,
+ priv->inl_recv_size);
+ priv->inl_recv_size =
+ exp_device_attr.inline_recv_sz;
+ }
+ }
+ INFO("Set inline receive size to %u",
+ priv->inl_recv_size);
+ }
+#endif /* INLINE_RECV */
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (mlx4_getenv_int("MLX4_COMPAT_VMWARE"))
+ priv->vmware = 1;
+#else /* MLX4_COMPAT_VMWARE */
+ (void)mlx4_getenv_int;
+#endif /* MLX4_COMPAT_VMWARE */
+ priv->vf = vf;
+ if (ibv_query_gid(ctx, port, 0, &temp_gid)) {
+ ERROR("ibv_query_gid() failure");
+ goto port_error;
+ }
+ /* Configure the first MAC address by default. */
+ mac_from_gid(&mac.addr_bytes, port, temp_gid.raw);
+ INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ priv->port,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ /* Register MAC and broadcast addresses. */
+ claim_zero(priv_mac_addr_add(priv, 0,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac.addr_bytes));
+ claim_zero(priv_mac_addr_add(priv, 1,
+ &(const uint8_t [ETHER_ADDR_LEN])
+ { "\xff\xff\xff\xff\xff\xff" }));
+#ifndef NDEBUG
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (priv_get_ifname(priv, &ifname) == 0)
+ DEBUG("port %u ifname is \"%s\"",
+ priv->port, ifname);
+ else
+ DEBUG("port %u ifname is unknown", priv->port);
+ }
+#endif
+ /* Get actual MTU if possible. */
+ priv_get_mtu(priv, &priv->mtu);
+ DEBUG("port %u MTU is %u", priv->port, priv->mtu);
+
+ /* from rte_ethdev.c */
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ {
+ char name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(name, sizeof(name), "%s port %u",
+ ibv_get_device_name(ibv_dev), port);
+ eth_dev = rte_eth_dev_allocate(name);
+ }
+#else
+ eth_dev = rte_eth_dev_allocate();
+#endif
+ if (eth_dev == NULL) {
+ ERROR("can not allocate rte ethdev");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ eth_dev->data->dev_private = priv;
+ eth_dev->pci_dev = pci_dev;
+ eth_dev->driver = &mlx4_driver;
+ eth_dev->data->rx_mbuf_alloc_failed = 0;
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ eth_dev->data->mtu = ETHER_MTU;
+#else
+ eth_dev->data->max_frame_size = ETHER_MAX_LEN;
+#endif
+
+ priv->dev = eth_dev;
+ eth_dev->dev_ops = &mlx4_dev_ops;
+ eth_dev->data->mac_addrs = priv->mac;
+
+ /* Bring Ethernet device up. */
+ DEBUG("forcing Ethernet interface up");
+ priv_set_flags(priv, ~IFF_UP, IFF_UP);
+ continue;
+
+port_error:
+ if (priv)
+ rte_free(priv);
+ if (pd)
+ claim_zero(ibv_dealloc_pd(pd));
+ if (ctx)
+ claim_zero(ibv_close_device(ctx));
+ break;
+ }
+
+ /*
+ * XXX if something went wrong in the loop above, there is a resource
+ * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
+ * long as the dpdk does not provide a way to deallocate a ethdev and a
+ * way to enumerate the registered ethdevs to free the previous ones.
+ */
+
+ /* no port found, complain */
+ if (!mlx4_dev[idx].ports) {
+ err = ENODEV;
+ goto error;
+ }
+
+error:
+ if (attr_ctx)
+ claim_zero(ibv_close_device(attr_ctx));
+ if (list)
+ ibv_free_device_list(list);
+ assert(err >= 0);
+ return -err;
+}
+
+static struct rte_pci_id mlx4_pci_id_map[] = {
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3VF,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = 0
+ }
+};
+
+static struct eth_driver mlx4_driver = {
+ .pci_drv = {
+ .name = MLX4_DRIVER_NAME,
+ .id_table = mlx4_pci_id_map,
+ .devinit = mlx4_pci_devinit,
+ },
+ .dev_private_size = sizeof(struct priv)
+};
+
+/**
+ * Driver initialization routine.
+ */
+static int
+rte_mlx4_pmd_init(const char *name, const char *args)
+{
+ (void)name;
+ (void)args;
+ rte_eal_pci_register(&mlx4_driver.pci_drv);
+ return 0;
+}
+
+static struct rte_driver rte_mlx4_driver = {
+ .type = PMD_PDEV,
+ .name = MLX4_DRIVER_NAME,
+ .init = rte_mlx4_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_mlx4_driver)
diff --git a/lib/librte_pmd_mlx4/mlx4.h b/lib/librte_pmd_mlx4/mlx4.h
new file mode 100644
index 0000000..af3683d
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.h
@@ -0,0 +1,165 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright 2012-2015 6WIND S.A.
+ * Copyright 2012 Mellanox.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_PMD_MLX4_H_
+#define RTE_PMD_MLX4_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <limits.h>
+
+/*
+ * Maximum number of simultaneous MAC addresses supported.
+ *
+ * According to ConnectX's Programmer Reference Manual:
+ * The L2 Address Match is implemented by comparing a MAC/VLAN combination
+ * of 128 MAC addresses and 127 VLAN values, comprising 128x127 possible
+ * L2 addresses.
+ */
+#define MLX4_MAX_MAC_ADDRESSES 128
+
+/* Maximum number of simultaneous VLAN filters supported. See above. */
+#define MLX4_MAX_VLAN_IDS 127
+
+/* Maximum number of Scatter/Gather Elements per Work Request. */
+#ifndef MLX4_PMD_SGE_WR_N
+#define MLX4_PMD_SGE_WR_N 4
+#endif
+
+/* Maximum size for inline data. */
+#ifndef MLX4_PMD_MAX_INLINE
+#define MLX4_PMD_MAX_INLINE 0
+#endif
+
+/*
+ * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
+ * from which buffers are to be transmitted will have to be mapped by this
+ * driver to their own Memory Region (MR). This is a slow operation.
+ *
+ * This value is always 1 for RX queues.
+ */
+#ifndef MLX4_PMD_TX_MP_CACHE
+#define MLX4_PMD_TX_MP_CACHE 8
+#endif
+
+/*
+ * If defined, only use software counters. The PMD will never ask the hardware
+ * for these, and many of them won't be available.
+ */
+#ifndef MLX4_PMD_SOFT_COUNTERS
+#define MLX4_PMD_SOFT_COUNTERS 1
+#endif
+
+/*
+ * If defined, enable VMware compatibility code. It also requires the
+ * environment variable MLX4_COMPAT_VMWARE set to a nonzero value at runtime.
+ */
+#ifndef MLX4_COMPAT_VMWARE
+#define MLX4_COMPAT_VMWARE 1
+#endif
+
+enum {
+ PCI_VENDOR_ID_MELLANOX = 0x15b3,
+};
+
+enum {
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3 = 0x1003,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF = 0x1004,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO = 0x1007,
+};
+
+#define MLX4_DRIVER_NAME "librte_pmd_mlx4"
+
+/* Bit-field manipulation. */
+#define BITFIELD_DECLARE(bf, type, size) \
+ type bf[(((size_t)(size) / (sizeof(type) * CHAR_BIT)) + \
+ !!((size_t)(size) % (sizeof(type) * CHAR_BIT)))]
+#define BITFIELD_DEFINE(bf, type, size) \
+ BITFIELD_DECLARE((bf), type, (size)) = { 0 }
+#define BITFIELD_SET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] |= \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_RESET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] &= \
+ ~((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_ISSET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ !!(((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] & \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT))))))
+
+/* Number of elements in array. */
+#define elemof(a) (sizeof(a) / sizeof((a)[0]))
+
+/* Cast pointer p to structure member m to its parent structure of type t. */
+#define containerof(p, t, m) ((t *)((uint8_t *)(p) - offsetof(t, m)))
+
+/* Branch prediction helpers. */
+#ifndef likely
+#define likely(c) __builtin_expect(!!(c), 1)
+#endif
+#ifndef unlikely
+#define unlikely(c) __builtin_expect(!!(c), 0)
+#endif
+
+/* Debugging */
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ fflush(stderr), \
+ (void)0)
+/*
+ * Save/restore errno around DEBUG__().
+ * XXX somewhat undefined behavior, but works.
+ */
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define claim_zero(...) assert((__VA_ARGS__) == 0)
+#define claim_nonzero(...) assert((__VA_ARGS__) != 0)
+#define claim_positive(...) assert((__VA_ARGS__) >= 0)
+#else /* NDEBUG */
+/* No-ops. */
+#define DEBUG(...) (void)0
+#define claim_zero(...) (__VA_ARGS__)
+#define claim_nonzero(...) (__VA_ARGS__)
+#define claim_positive(...) (__VA_ARGS__)
+#endif /* NDEBUG */
+
+#endif /* RTE_PMD_MLX4_H_ */
diff --git a/lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map b/lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map
new file mode 100644
index 0000000..ef35398
--- /dev/null
+++ b/lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map
@@ -0,0 +1,4 @@
+DPDK_2.0 {
+
+ local: *;
+};
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 2d90a4f..63a41e2 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -147,6 +147,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
LDLIBS += -lfuse
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -libverbs
+endif
+
LDLIBS += --start-group
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
@@ -231,6 +235,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_E1000_PMD),y)
LDLIBS += -lrte_pmd_e1000
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -lrte_pmd_mlx4
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
LDLIBS += -lrte_pmd_ring
endif
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4 documentation
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 1/3] scripts: check features to generate configuration header Adrien Mazarguil
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 2/3] mlx4: new poll mode driver Adrien Mazarguil
@ 2015-02-25 13:52 ` Adrien Mazarguil
2015-03-02 17:45 ` Butler, Siobhan A
2015-02-25 15:13 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Thomas Monjalon
2015-02-26 11:51 ` Gleb Natapov
4 siblings, 1 reply; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-25 13:52 UTC (permalink / raw)
To: dev
This documentation covers implementation details, features and limitations,
configuration, prerequisites and provides a usage example.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
MAINTAINERS | 1 +
doc/guides/prog_guide/index.rst | 1 +
doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 326 +++++++++++++++++++++++++++
doc/guides/prog_guide/source_org.rst | 1 +
4 files changed, 329 insertions(+)
create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
diff --git a/MAINTAINERS b/MAINTAINERS
index d8b0fbc..ac61825 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -223,6 +223,7 @@ F: lib/librte_pmd_fm10k/
Mellanox mlx4
M: Adrien Mazarguil <adrien.mazarguil@6wind.com>
F: lib/librte_pmd_mlx4/
+F: doc/guides/prog_guide/mlx4_poll_mode_drv.rst
RedHat virtio
M: Changchun Ouyang <changchun.ouyang@intel.com>
diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
index de69682..87f6b35 100644
--- a/doc/guides/prog_guide/index.rst
+++ b/doc/guides/prog_guide/index.rst
@@ -56,6 +56,7 @@ Programmer's Guide
intel_dpdk_xen_based_packet_switch_sol
libpcap_ring_based_poll_mode_drv
link_bonding_poll_mode_drv_lib
+ mlx4_poll_mode_drv
timer_lib
hash_lib
lpm_lib
diff --git a/doc/guides/prog_guide/mlx4_poll_mode_drv.rst b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
new file mode 100644
index 0000000..35570c3
--- /dev/null
+++ b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
@@ -0,0 +1,326 @@
+.. BSD LICENSE
+ Copyright 2012-2015 6WIND S.A.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MLX4 poll mode driver library
+=============================
+
+The MLX4 poll mode driver library (**librte_pmd_mlx4**) implements support
+for **Mellanox ConnectX-3** 10/40 Gbps adapters (EN 40, EN 10, Pro EN 40) as
+well as their virtual functions (VF) in SR-IOV context.
+
+.. note::
+
+ Due to external dependencies, this driver is disabled by default. It must
+ be enabled manually by setting ``CONFIG_RTE_LIBRTE_MLX4_PMD=y`` and
+ recompiling DPDK.
+
+Implementation details
+----------------------
+
+Most Mellanox ConnectX-3 devices provide two ports but expose a single PCI
+bus address, thus unlike most drivers, librte_pmd_mlx4 registers itself as a
+PCI driver that allocates one Ethernet device per detected port.
+
+For this reason, one cannot white/blacklist a single port without also
+white/blacklisting the others on the same device.
+
+Besides its dependency on libibverbs (that implies libmlx4 and associated
+kernel support), librte_pmd_mlx4 relies heavily on system calls for control
+operations such as querying/updating the MTU and flow control parameters.
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
+
+Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
+
+Features and limitations
+------------------------
+
+- RSS, also known as RCA, is supported. In this mode the number of
+ configured RX queues must be a power of two.
+- VLAN filtering is supported.
+- Link state information is provided.
+- Promiscuous mode is supported.
+- All multicast mode is supported.
+- Multiple MAC addresses (unicast, multicast) can be configured.
+- Scattered packets are supported for TX and RX.
+
+..
+
+- RSS hash key cannot be modified.
+- Hardware counters are not implemented (they are software counters).
+- Checksum offloads are not supported yet.
+
+Configuration
+-------------
+
+Compilation options
+~~~~~~~~~~~~~~~~~~~
+
+- ``CONFIG_RTE_LIBRTE_MLX4_PMD`` (default **n**)
+
+ Toggle compilation of librte_pmd_mlx4 itself.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_DEBUG`` (default **n**)
+
+ Toggle debugging code and stricter compilation flags. Enabling this option
+ adds additional run-time checks and debugging messages at the cost of
+ lower performance.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N`` (default **4**)
+
+ Number of scatter/gather elements (SGEs) per work request (WR). Lowering
+ this number improves performance but also limits the ability to receive
+ scattered packets (packets that do not fit a single mbuf). The default
+ value is a safe tradeoff.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE`` (default **0**)
+
+ Amount of data to be inlined during TX operations. Improves latency but
+ lowers throughput.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE`` (default **8**)
+
+ Maximum number of cached memory pools (MPs) per TX queue. Each MP from
+ which buffers are to be transmitted must be associated to memory regions
+ (MRs). This is a slow operation that must be cached.
+
+ This value is always 1 for RX queues since they use a single MP.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS`` (default **1**)
+
+ Toggle software counters. No counters are available if this option is
+ disabled since hardware counters are not supported.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE`` (default **1**)
+
+ Toggle VMware compatibility code. It also requires the environment
+ variable ``MLX4_COMPAT_VMWARE`` set to a nonzero value at runtime.
+
+Environment variables
+~~~~~~~~~~~~~~~~~~~~~
+
+- ``MLX4_INLINE_RECV_SIZE``
+
+ A nonzero value enables inline receive for packets up to that size. May
+ significantly improve performance in some cases but lower it in
+ others. Requires careful testing.
+
+- ``MLX4_COMPAT_VMWARE``
+
+ Only supported when compiled with
+ ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1``. Adds workarounds to run in
+ VMware systems that do not support the flows API properly.
+
+Run-time configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+- The only constraint when RSS mode is requested is to make sure the number
+ of RX queues is a power of two. This is a hardware requirement.
+
+- librte_pmd_mlx4 brings kernel network interfaces up during initialization
+ because it is affected by their state. Forcing them down prevents packets
+ reception.
+
+- **ethtool** operations on related kernel interfaces also affect the PMD.
+
+Prerequisites
+-------------
+
+This driver relies on external libraries and kernel drivers for resources
+allocations and initialization. The following dependencies are not part of
+DPDK and must be installed separately:
+
+- **libibverbs**
+
+ User space verbs framework used by librte_pmd_mlx4. This library provides
+ a generic interface between the kernel and low-level user space drivers
+ such as libmlx4.
+
+ It allows slow and privileged operations (context initialization, hardware
+ resources allocations) to be managed by the kernel and fast operations to
+ never leave user space.
+
+- **libmlx4**
+
+ Low-level user space driver library for Mellanox ConnectX-3 devices,
+ it is automatically loaded by libibverbs.
+
+ This library basically implements send/receive calls to the hardware
+ queues.
+
+- **Kernel modules** (mlnx-ofed-kernel)
+
+ They provide the kernel-side verbs API and low level device drivers that
+ manage actual hardware initialization and resources sharing with user
+ space processes.
+
+ Unlike most other PMDs, these modules must remain loaded and bound to
+ their devices:
+
+ - mlx4_core: hardware driver managing Mellanox ConnectX-3 devices.
+ - mlx4_en: Ethernet device driver that provides kernel network interfaces.
+ - mlx4_ib: InifiniBand device driver.
+ - ib_uverbs: user space driver for verbs (entry point for libibverbs).
+
+While these libraries and kernel modules are available on OpenFabrics
+Aliance's `website <https://www.openfabrics.org/>`_ and provided by package
+managers on most distributions, this PMD requires Ethernet extensions that
+may not be supported at the moment (this is a work in progress).
+
+`Mellanox OFED
+<http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers>`_
+includes the necessary support and should be used in the meantime. For DPDK,
+only libibverbs, libmlx4 and mlnx-ofed-kernel packages are required from
+that distribution.
+
+.. note::
+
+ Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
+ licensed.
+
+Usage example
+-------------
+
+This section demonstrates how to launch **testpmd** with Mellanox ConnectX-3
+devices managed by librte_pmd_mlx4.
+
+#. Load the kernel modules:
+
+ .. code-block:: console
+
+ modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
+
+ .. note::
+
+ User space I/O kernel modules (uio and igb_uio) are not used and do
+ not have to be loaded.
+
+#. Make sure Ethernet interfaces are in working order and linked to kernel
+ verbs. Related sysfs entries should be present:
+
+ .. code-block:: console
+
+ ls -d /sys/class/net/*/device/infiniband_verbs/uverbs* | cut -d / -f 5
+
+ Example output:
+
+ .. code-block:: console
+
+ eth2
+ eth3
+ eth4
+ eth5
+
+#. Optionally, retrieve their PCI bus addresses for whitelisting:
+
+ .. code-block:: console
+
+ {
+ for intf in eth2 eth3 eth4 eth5;
+ do
+ (cd "/sys/class/net/${intf}/device/" && pwd -P);
+ done;
+ } |
+ sed -n 's,.*/\(.*\),-w \1,p'
+
+ Example output:
+
+ .. code-block:: console
+
+ -w 0000:83:00.0
+ -w 0000:83:00.0
+ -w 0000:84:00.0
+ -w 0000:84:00.0
+
+ .. note::
+
+ There are only two distinct PCI bus addresses because the Mellanox
+ ConnectX-3 adapters installed on this system are dual port.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Start testpmd with basic parameters:
+
+ .. code-block:: console
+
+ testpmd -c 0xff00 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2 --txq=2 -i
+
+ Example output:
+
+ .. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:83:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:b7:50
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:b7:51
+ EAL: PCI device 0000:84:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_1" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:ba:b0
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:ba:b1
+ Interactive-mode selected
+ Configuring Port 0 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867d60: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867d60: RX queues number update: 0 -> 2
+ Port 0: 00:02:C9:B5:B7:50
+ Configuring Port 1 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867da0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867da0: RX queues number update: 0 -> 2
+ Port 1: 00:02:C9:B5:B7:51
+ Configuring Port 2 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867de0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867de0: RX queues number update: 0 -> 2
+ Port 2: 00:02:C9:B5:BA:B0
+ Configuring Port 3 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867e20: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867e20: RX queues number update: 0 -> 2
+ Port 3: 00:02:C9:B5:BA:B1
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 40000 Mbps - full-duplex
+ Port 2 Link Up - speed 10000 Mbps - full-duplex
+ Port 3 Link Up - speed 40000 Mbps - full-duplex
+ Done
+ testpmd>
diff --git a/doc/guides/prog_guide/source_org.rst b/doc/guides/prog_guide/source_org.rst
index c8ca54f..c66ad16 100644
--- a/doc/guides/prog_guide/source_org.rst
+++ b/doc/guides/prog_guide/source_org.rst
@@ -83,6 +83,7 @@ The lib directory contains::
+-- librte_pmd_e1000 # 1GbE poll mode drivers (igb and em)
+-- librte_pmd_ixgbe # 10GbE poll mode driver
+-- librte_pmd_i40e # 40GbE poll mode driver
+ +-- librte_pmd_mlx4 # Mellanox ConnectX-3 poll mode driver
+-- librte_pmd_pcap # PCAP poll mode driver
+-- librte_pmd_ring # ring poll mode driver
+-- librte_pmd_virtio # virtio poll mode driver
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4 documentation
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4 documentation Adrien Mazarguil
@ 2015-03-02 17:45 ` Butler, Siobhan A
0 siblings, 0 replies; 24+ messages in thread
From: Butler, Siobhan A @ 2015-03-02 17:45 UTC (permalink / raw)
To: Adrien Mazarguil, dev
Thank you Adrien this is great.
Siobhan
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Adrien Mazarguil
> Sent: Wednesday, February 25, 2015 1:52 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4
> documentation
>
> This documentation covers implementation details, features and limitations,
> configuration, prerequisites and provides a usage example.
>
> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
> ---
> MAINTAINERS | 1 +
> doc/guides/prog_guide/index.rst | 1 +
> doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 326
> +++++++++++++++++++++++++++
> doc/guides/prog_guide/source_org.rst | 1 +
> 4 files changed, 329 insertions(+)
> create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d8b0fbc..ac61825 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -223,6 +223,7 @@ F: lib/librte_pmd_fm10k/ Mellanox mlx4
> M: Adrien Mazarguil <adrien.mazarguil@6wind.com>
> F: lib/librte_pmd_mlx4/
> +F: doc/guides/prog_guide/mlx4_poll_mode_drv.rst
>
> RedHat virtio
> M: Changchun Ouyang <changchun.ouyang@intel.com> diff --git
> a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
> index de69682..87f6b35 100644
> --- a/doc/guides/prog_guide/index.rst
> +++ b/doc/guides/prog_guide/index.rst
> @@ -56,6 +56,7 @@ Programmer's Guide
> intel_dpdk_xen_based_packet_switch_sol
> libpcap_ring_based_poll_mode_drv
> link_bonding_poll_mode_drv_lib
> + mlx4_poll_mode_drv
> timer_lib
> hash_lib
> lpm_lib
> diff --git a/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
> b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
> new file mode 100644
> index 0000000..35570c3
> --- /dev/null
> +++ b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
> @@ -0,0 +1,326 @@
> +.. BSD LICENSE
> + Copyright 2012-2015 6WIND S.A.
> +
> + Redistribution and use in source and binary forms, with or without
> + modification, are permitted provided that the following conditions
> + are met:
> +
> + * Redistributions of source code must retain the above copyright
> + notice, this list of conditions and the following disclaimer.
> + * Redistributions in binary form must reproduce the above copyright
> + notice, this list of conditions and the following disclaimer in
> + the documentation and/or other materials provided with the
> + distribution.
> + * Neither the name of 6WIND S.A. nor the names of its
> + contributors may be used to endorse or promote products derived
> + from this software without specific prior written permission.
> +
> + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
> CONTRIBUTORS
> + "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT
> NOT
> + LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
> FITNESS FOR
> + A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
> COPYRIGHT
> + OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
> INCIDENTAL,
> + SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
> NOT
> + LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
> OF USE,
> + DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
> AND ON ANY
> + THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
> + (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
> THE USE
> + OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
> DAMAGE.
> +
> +MLX4 poll mode driver library
> +=============================
> +
> +The MLX4 poll mode driver library (**librte_pmd_mlx4**) implements
> +support for **Mellanox ConnectX-3** 10/40 Gbps adapters (EN 40, EN 10,
> +Pro EN 40) as well as their virtual functions (VF) in SR-IOV context.
> +
> +.. note::
> +
> + Due to external dependencies, this driver is disabled by default. It must
> + be enabled manually by setting ``CONFIG_RTE_LIBRTE_MLX4_PMD=y``
> and
> + recompiling DPDK.
> +
> +Implementation details
> +----------------------
> +
> +Most Mellanox ConnectX-3 devices provide two ports but expose a single
> +PCI bus address, thus unlike most drivers, librte_pmd_mlx4 registers
> +itself as a PCI driver that allocates one Ethernet device per detected port.
> +
> +For this reason, one cannot white/blacklist a single port without also
> +white/blacklisting the others on the same device.
> +
> +Besides its dependency on libibverbs (that implies libmlx4 and
> +associated kernel support), librte_pmd_mlx4 relies heavily on system
> +calls for control operations such as querying/updating the MTU and flow
> control parameters.
> +
> +For security reasons and robustness, this driver only deals with
> +virtual memory addresses. The way resources allocations are handled by
> +the kernel combined with hardware specifications that allow it to
> +handle virtual memory addresses directly ensure that DPDK applications
> +cannot access random physical memory (or memory that does not belong
> to the current process).
> +
> +This capability allows the PMD to coexist with kernel network
> +interfaces which remain functional, although they stop receiving
> +unicast packets as long as they share the same MAC address.
> +
> +Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
> +
> +Features and limitations
> +------------------------
> +
> +- RSS, also known as RCA, is supported. In this mode the number of
> + configured RX queues must be a power of two.
> +- VLAN filtering is supported.
> +- Link state information is provided.
> +- Promiscuous mode is supported.
> +- All multicast mode is supported.
> +- Multiple MAC addresses (unicast, multicast) can be configured.
> +- Scattered packets are supported for TX and RX.
> +
> +..
> +
> +- RSS hash key cannot be modified.
> +- Hardware counters are not implemented (they are software counters).
> +- Checksum offloads are not supported yet.
> +
> +Configuration
> +-------------
> +
> +Compilation options
> +~~~~~~~~~~~~~~~~~~~
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_PMD`` (default **n**)
> +
> + Toggle compilation of librte_pmd_mlx4 itself.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_DEBUG`` (default **n**)
> +
> + Toggle debugging code and stricter compilation flags. Enabling this
> + option adds additional run-time checks and debugging messages at the
> + cost of lower performance.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N`` (default **4**)
> +
> + Number of scatter/gather elements (SGEs) per work request (WR).
> + Lowering this number improves performance but also limits the ability
> + to receive scattered packets (packets that do not fit a single mbuf).
> + The default value is a safe tradeoff.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE`` (default **0**)
> +
> + Amount of data to be inlined during TX operations. Improves latency
> + but lowers throughput.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE`` (default **8**)
> +
> + Maximum number of cached memory pools (MPs) per TX queue. Each MP
> + from which buffers are to be transmitted must be associated to memory
> + regions (MRs). This is a slow operation that must be cached.
> +
> + This value is always 1 for RX queues since they use a single MP.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS`` (default **1**)
> +
> + Toggle software counters. No counters are available if this option is
> + disabled since hardware counters are not supported.
> +
> +- ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE`` (default **1**)
> +
> + Toggle VMware compatibility code. It also requires the environment
> + variable ``MLX4_COMPAT_VMWARE`` set to a nonzero value at runtime.
> +
> +Environment variables
> +~~~~~~~~~~~~~~~~~~~~~
> +
> +- ``MLX4_INLINE_RECV_SIZE``
> +
> + A nonzero value enables inline receive for packets up to that size.
> + May significantly improve performance in some cases but lower it in
> + others. Requires careful testing.
> +
> +- ``MLX4_COMPAT_VMWARE``
> +
> + Only supported when compiled with
> + ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1``. Adds workarounds
> to run
> + in VMware systems that do not support the flows API properly.
> +
> +Run-time configuration
> +~~~~~~~~~~~~~~~~~~~~~~
> +
> +- The only constraint when RSS mode is requested is to make sure the
> +number
> + of RX queues is a power of two. This is a hardware requirement.
> +
> +- librte_pmd_mlx4 brings kernel network interfaces up during
> +initialization
> + because it is affected by their state. Forcing them down prevents
> +packets
> + reception.
> +
> +- **ethtool** operations on related kernel interfaces also affect the PMD.
> +
> +Prerequisites
> +-------------
> +
> +This driver relies on external libraries and kernel drivers for
> +resources allocations and initialization. The following dependencies
> +are not part of DPDK and must be installed separately:
> +
> +- **libibverbs**
> +
> + User space verbs framework used by librte_pmd_mlx4. This library
> + provides a generic interface between the kernel and low-level user
> + space drivers such as libmlx4.
> +
> + It allows slow and privileged operations (context initialization,
> + hardware resources allocations) to be managed by the kernel and fast
> + operations to never leave user space.
> +
> +- **libmlx4**
> +
> + Low-level user space driver library for Mellanox ConnectX-3 devices,
> + it is automatically loaded by libibverbs.
> +
> + This library basically implements send/receive calls to the hardware
> + queues.
> +
> +- **Kernel modules** (mlnx-ofed-kernel)
> +
> + They provide the kernel-side verbs API and low level device drivers
> + that manage actual hardware initialization and resources sharing with
> + user space processes.
> +
> + Unlike most other PMDs, these modules must remain loaded and bound
> to
> + their devices:
> +
> + - mlx4_core: hardware driver managing Mellanox ConnectX-3 devices.
> + - mlx4_en: Ethernet device driver that provides kernel network interfaces.
> + - mlx4_ib: InifiniBand device driver.
> + - ib_uverbs: user space driver for verbs (entry point for libibverbs).
> +
> +While these libraries and kernel modules are available on OpenFabrics
> +Aliance's `website <https://www.openfabrics.org/>`_ and provided by
> +package managers on most distributions, this PMD requires Ethernet
> +extensions that may not be supported at the moment (this is a work in
> progress).
> +
> +`Mellanox OFED
> +<http://www.mellanox.com/page/products_dyn?product_family=26&mta
> g=linux
> +_sw_drivers>`_ includes the necessary support and should be used in the
> +meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel
> +packages are required from that distribution.
> +
> +.. note::
> +
> + Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
> + licensed.
> +
> +Usage example
> +-------------
> +
> +This section demonstrates how to launch **testpmd** with Mellanox
> +ConnectX-3 devices managed by librte_pmd_mlx4.
> +
> +#. Load the kernel modules:
> +
> + .. code-block:: console
> +
> + modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
> +
> + .. note::
> +
> + User space I/O kernel modules (uio and igb_uio) are not used and do
> + not have to be loaded.
> +
> +#. Make sure Ethernet interfaces are in working order and linked to kernel
> + verbs. Related sysfs entries should be present:
> +
> + .. code-block:: console
> +
> + ls -d /sys/class/net/*/device/infiniband_verbs/uverbs* | cut -d /
> + -f 5
> +
> + Example output:
> +
> + .. code-block:: console
> +
> + eth2
> + eth3
> + eth4
> + eth5
> +
> +#. Optionally, retrieve their PCI bus addresses for whitelisting:
> +
> + .. code-block:: console
> +
> + {
> + for intf in eth2 eth3 eth4 eth5;
> + do
> + (cd "/sys/class/net/${intf}/device/" && pwd -P);
> + done;
> + } |
> + sed -n 's,.*/\(.*\),-w \1,p'
> +
> + Example output:
> +
> + .. code-block:: console
> +
> + -w 0000:83:00.0
> + -w 0000:83:00.0
> + -w 0000:84:00.0
> + -w 0000:84:00.0
> +
> + .. note::
> +
> + There are only two distinct PCI bus addresses because the Mellanox
> + ConnectX-3 adapters installed on this system are dual port.
> +
> +#. Request huge pages:
> +
> + .. code-block:: console
> +
> + echo 1024 >
> + /sys/kernel/mm/hugepages/hugepages-
> 2048kB/nr_hugepages/nr_hugepages
> +
> +#. Start testpmd with basic parameters:
> +
> + .. code-block:: console
> +
> + testpmd -c 0xff00 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2
> + --txq=2 -i
> +
> + Example output:
> +
> + .. code-block:: console
> +
> + [...]
> + EAL: PCI device 0000:83:00.0 on NUMA socket 1
> + EAL: probe driver: 15b3:1007 librte_pmd_mlx4
> + PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0"
> (VF: false)
> + PMD: librte_pmd_mlx4: 2 port(s) detected
> + PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:b7:50
> + PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:b7:51
> + EAL: PCI device 0000:84:00.0 on NUMA socket 1
> + EAL: probe driver: 15b3:1007 librte_pmd_mlx4
> + PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_1"
> (VF: false)
> + PMD: librte_pmd_mlx4: 2 port(s) detected
> + PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:ba:b0
> + PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:ba:b1
> + Interactive-mode selected
> + Configuring Port 0 (socket 0)
> + PMD: librte_pmd_mlx4: 0x867d60: TX queues number update: 0 -> 2
> + PMD: librte_pmd_mlx4: 0x867d60: RX queues number update: 0 -> 2
> + Port 0: 00:02:C9:B5:B7:50
> + Configuring Port 1 (socket 0)
> + PMD: librte_pmd_mlx4: 0x867da0: TX queues number update: 0 -> 2
> + PMD: librte_pmd_mlx4: 0x867da0: RX queues number update: 0 -> 2
> + Port 1: 00:02:C9:B5:B7:51
> + Configuring Port 2 (socket 0)
> + PMD: librte_pmd_mlx4: 0x867de0: TX queues number update: 0 -> 2
> + PMD: librte_pmd_mlx4: 0x867de0: RX queues number update: 0 -> 2
> + Port 2: 00:02:C9:B5:BA:B0
> + Configuring Port 3 (socket 0)
> + PMD: librte_pmd_mlx4: 0x867e20: TX queues number update: 0 -> 2
> + PMD: librte_pmd_mlx4: 0x867e20: RX queues number update: 0 -> 2
> + Port 3: 00:02:C9:B5:BA:B1
> + Checking link statuses...
> + Port 0 Link Up - speed 10000 Mbps - full-duplex
> + Port 1 Link Up - speed 40000 Mbps - full-duplex
> + Port 2 Link Up - speed 10000 Mbps - full-duplex
> + Port 3 Link Up - speed 40000 Mbps - full-duplex
> + Done
> + testpmd>
> diff --git a/doc/guides/prog_guide/source_org.rst
> b/doc/guides/prog_guide/source_org.rst
> index c8ca54f..c66ad16 100644
> --- a/doc/guides/prog_guide/source_org.rst
> +++ b/doc/guides/prog_guide/source_org.rst
> @@ -83,6 +83,7 @@ The lib directory contains::
> +-- librte_pmd_e1000 # 1GbE poll mode drivers (igb and em)
> +-- librte_pmd_ixgbe # 10GbE poll mode driver
> +-- librte_pmd_i40e # 40GbE poll mode driver
> + +-- librte_pmd_mlx4 # Mellanox ConnectX-3 poll mode driver
> +-- librte_pmd_pcap # PCAP poll mode driver
> +-- librte_pmd_ring # ring poll mode driver
> +-- librte_pmd_virtio # virtio poll mode driver
> --
> 2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (2 preceding siblings ...)
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 3/3] doc: add librte_pmd_mlx4 documentation Adrien Mazarguil
@ 2015-02-25 15:13 ` Thomas Monjalon
2015-02-26 11:51 ` Gleb Natapov
4 siblings, 0 replies; 24+ messages in thread
From: Thomas Monjalon @ 2015-02-25 15:13 UTC (permalink / raw)
To: Adrien Mazarguil; +Cc: dev
> This PMD adds support for Mellanox ConnectX-3-based adapters through the
> verbs framework. It relies on external libraries (libibverbs and user space
> driver libmlx4) and kernel support to do so.
>
> While these libraries and kernel modules are available on OpenFabrics
> Alliance's website [1] and provided by package managers on most
> distributions, this PMD requires Ethernet extensions that may not be
> supported at the moment (this is a work in progress).
>
> Mellanox OFED [2] includes the necessary support and should be used in the
> meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel packages
> are required from that distribution.
>
> The following kernel modules must be loaded before using this PMD:
>
> - mlx4_core (hardware driver, does global initialization)
> - mlx4_en (Ethernet device driver)
> - mlx4_ib (InfiniBand device driver)
> - ib_uverbs (user space driver for verbs)
>
> [1] https://www.openfabrics.org/
> [2] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
>
> v2:
> - Include minor bugfix for VLAN filtering.
> - Add maintainers entry.
> - Add documentation.
>
> v3:
> - Add script and documentation to MAINTAINERS.
> - Make cosmetic changes to copyright notices.
> - Remove unwanted executable bits.
> - Fix coding style and typos found by checkpatch.
> - Add shared library compilation support.
>
> Adrien Mazarguil (3):
> scripts: check features to generate configuration header
> mlx4: new poll mode driver
> doc: add librte_pmd_mlx4 documentation
Applied, thanks
Documentation should be moved in a NICs guide (work in progress).
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-25 13:52 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (3 preceding siblings ...)
2015-02-25 15:13 ` [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD Thomas Monjalon
@ 2015-02-26 11:51 ` Gleb Natapov
2015-02-26 13:36 ` Thomas Monjalon
4 siblings, 1 reply; 24+ messages in thread
From: Gleb Natapov @ 2015-02-26 11:51 UTC (permalink / raw)
To: Adrien Mazarguil; +Cc: dev
Did git pull today. After enabling mlnx pmd compilation fails with:
dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
eth_dev = rte_eth_dev_allocate(name);
On Wed, Feb 25, 2015 at 02:52:03PM +0100, Adrien Mazarguil wrote:
> This PMD adds support for Mellanox ConnectX-3-based adapters through the
> verbs framework. It relies on external libraries (libibverbs and user space
> driver libmlx4) and kernel support to do so.
>
> While these libraries and kernel modules are available on OpenFabrics
> Alliance's website [1] and provided by package managers on most
> distributions, this PMD requires Ethernet extensions that may not be
> supported at the moment (this is a work in progress).
>
> Mellanox OFED [2] includes the necessary support and should be used in the
> meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel packages
> are required from that distribution.
>
> The following kernel modules must be loaded before using this PMD:
>
> - mlx4_core (hardware driver, does global initialization)
> - mlx4_en (Ethernet device driver)
> - mlx4_ib (InfiniBand device driver)
> - ib_uverbs (user space driver for verbs)
>
> [1] https://www.openfabrics.org/
> [2] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
>
> v2:
> - Include minor bugfix for VLAN filtering.
> - Add maintainers entry.
> - Add documentation.
>
> v3:
> - Add script and documentation to MAINTAINERS.
> - Make cosmetic changes to copyright notices.
> - Remove unwanted executable bits.
> - Fix coding style and typos found by checkpatch.
> - Add shared library compilation support.
>
> Adrien Mazarguil (3):
> scripts: check features to generate configuration header
> mlx4: new poll mode driver
> doc: add librte_pmd_mlx4 documentation
>
> MAINTAINERS | 6 +
> config/common_bsdapp | 11 +
> config/common_linuxapp | 11 +
> doc/guides/prog_guide/index.rst | 1 +
> doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 326 ++
> doc/guides/prog_guide/source_org.rst | 1 +
> lib/Makefile | 1 +
> lib/librte_pmd_mlx4/Makefile | 121 +
> lib/librte_pmd_mlx4/mlx4.c | 4749 ++++++++++++++++++++++++++
> lib/librte_pmd_mlx4/mlx4.h | 165 +
> lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map | 4 +
> mk/rte.app.mk | 8 +
> scripts/auto-config-h.sh | 136 +
> 13 files changed, 5540 insertions(+)
> create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
> create mode 100644 lib/librte_pmd_mlx4/Makefile
> create mode 100644 lib/librte_pmd_mlx4/mlx4.c
> create mode 100644 lib/librte_pmd_mlx4/mlx4.h
> create mode 100644 lib/librte_pmd_mlx4/rte_pmd_mlx4_version.map
> create mode 100755 scripts/auto-config-h.sh
>
> --
> 2.1.0
>
--
Gleb.
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-26 11:51 ` Gleb Natapov
@ 2015-02-26 13:36 ` Thomas Monjalon
2015-02-26 13:49 ` Gleb Natapov
0 siblings, 1 reply; 24+ messages in thread
From: Thomas Monjalon @ 2015-02-26 13:36 UTC (permalink / raw)
To: Gleb Natapov; +Cc: dev
2015-02-26 13:51, Gleb Natapov:
> Did git pull today. After enabling mlnx pmd compilation fails with:
>
> dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> eth_dev = rte_eth_dev_allocate(name);
Yes, thanks for reporting.
I didn't test the disabled mlx4 after hotplug integration:
dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
Clearly, I have to improve my sanity checks.
Sorry for the inconvenience.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-26 13:36 ` Thomas Monjalon
@ 2015-02-26 13:49 ` Gleb Natapov
2015-02-26 14:18 ` Adrien Mazarguil
2015-02-27 18:38 ` Adrien Mazarguil
0 siblings, 2 replies; 24+ messages in thread
From: Gleb Natapov @ 2015-02-26 13:49 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
On Thu, Feb 26, 2015 at 02:36:27PM +0100, Thomas Monjalon wrote:
> 2015-02-26 13:51, Gleb Natapov:
> > Did git pull today. After enabling mlnx pmd compilation fails with:
> >
> > dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> > dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> > eth_dev = rte_eth_dev_allocate(name);
>
> Yes, thanks for reporting.
> I didn't test the disabled mlx4 after hotplug integration:
> dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
>
> Clearly, I have to improve my sanity checks.
> Sorry for the inconvenience.
No problem, I fixed that locally, but now I see another issue. I have
several PMDs statically compiled in with my application and I expect
dpdk to choose correct one depending on available HW, but mlnx pmd does
not behave nicely, if its initialization fails it kills entire
application:
EAL: PCI device 0000:03:00.0 on NUMA socket 0
EAL: probe driver: 15b3:1003 librte_pmd_mlx4
EAL: Error - exiting with code: 1
Cause: Requested device 0000:03:00.0 cannot be used
This is how other pmds handle situation when init cannot be done:
EAL: PCI device 0000:02:00.0 on NUMA socket 0
EAL: probe driver: 8086:1528 rte_ixgbe_pmd
EAL: Not managed by known pt driver, skipped
EAL: PCI device 0000:02:00.1 on NUMA socket 0
EAL: probe driver: 8086:1528 rte_ixgbe_pmd
EAL: Not managed by known pt driver, skipped
--
Gleb.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-26 13:49 ` Gleb Natapov
@ 2015-02-26 14:18 ` Adrien Mazarguil
2015-02-26 15:03 ` Gleb Natapov
2015-02-27 18:38 ` Adrien Mazarguil
1 sibling, 1 reply; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-26 14:18 UTC (permalink / raw)
To: Gleb Natapov; +Cc: dev
On Thu, Feb 26, 2015 at 03:49:07PM +0200, Gleb Natapov wrote:
> On Thu, Feb 26, 2015 at 02:36:27PM +0100, Thomas Monjalon wrote:
> > 2015-02-26 13:51, Gleb Natapov:
> > > Did git pull today. After enabling mlnx pmd compilation fails with:
> > >
> > > dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> > > dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> > > eth_dev = rte_eth_dev_allocate(name);
> >
> > Yes, thanks for reporting.
> > I didn't test the disabled mlx4 after hotplug integration:
> > dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
> >
> > Clearly, I have to improve my sanity checks.
> > Sorry for the inconvenience.
> No problem, I fixed that locally, but now I see another issue. I have
> several PMDs statically compiled in with my application and I expect
> dpdk to choose correct one depending on available HW, but mlnx pmd does
> not behave nicely, if its initialization fails it kills entire
> application:
>
> EAL: PCI device 0000:03:00.0 on NUMA socket 0
> EAL: probe driver: 15b3:1003 librte_pmd_mlx4
> EAL: Error - exiting with code: 1
> Cause: Requested device 0000:03:00.0 cannot be used
About this error, make sure you are using the kernel modules provided by the
mlnx-ofed-kernel package from MOFED [1] as described in the documentation.
In short, unload mlx4_core, mlx4_en, mlx4_ib and ib_uverbs, install this
package, run depmod and load them again. Since they have similar names, the
updated kernel modules should be found in a "extra" or "updates"
subdirectory of /lib/modules and come first when queried by modinfo.
[1] http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
--
Adrien Mazarguil
6WIND
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-26 14:18 ` Adrien Mazarguil
@ 2015-02-26 15:03 ` Gleb Natapov
0 siblings, 0 replies; 24+ messages in thread
From: Gleb Natapov @ 2015-02-26 15:03 UTC (permalink / raw)
To: Thomas Monjalon, dev
On Thu, Feb 26, 2015 at 03:18:34PM +0100, Adrien Mazarguil wrote:
> On Thu, Feb 26, 2015 at 03:49:07PM +0200, Gleb Natapov wrote:
> > On Thu, Feb 26, 2015 at 02:36:27PM +0100, Thomas Monjalon wrote:
> > > 2015-02-26 13:51, Gleb Natapov:
> > > > Did git pull today. After enabling mlnx pmd compilation fails with:
> > > >
> > > > dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> > > > dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> > > > eth_dev = rte_eth_dev_allocate(name);
> > >
> > > Yes, thanks for reporting.
> > > I didn't test the disabled mlx4 after hotplug integration:
> > > dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
> > >
> > > Clearly, I have to improve my sanity checks.
> > > Sorry for the inconvenience.
> > No problem, I fixed that locally, but now I see another issue. I have
> > several PMDs statically compiled in with my application and I expect
> > dpdk to choose correct one depending on available HW, but mlnx pmd does
> > not behave nicely, if its initialization fails it kills entire
> > application:
> >
> > EAL: PCI device 0000:03:00.0 on NUMA socket 0
> > EAL: probe driver: 15b3:1003 librte_pmd_mlx4
> > EAL: Error - exiting with code: 1
> > Cause: Requested device 0000:03:00.0 cannot be used
>
> About this error, make sure you are using the kernel modules provided by the
> mlnx-ofed-kernel package from MOFED [1] as described in the documentation.
>
The problem is not in the error, I know how to get rid of it, but in the
error handling. My program has a fallback, so I an error to init a PMD
should not kill it, non other PMDs do.
--
Gleb.
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-26 13:49 ` Gleb Natapov
2015-02-26 14:18 ` Adrien Mazarguil
@ 2015-02-27 18:38 ` Adrien Mazarguil
2015-03-01 11:07 ` Gleb Natapov
1 sibling, 1 reply; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-27 18:38 UTC (permalink / raw)
To: Gleb Natapov; +Cc: dev
On Thu, Feb 26, 2015 at 03:49:07PM +0200, Gleb Natapov wrote:
> On Thu, Feb 26, 2015 at 02:36:27PM +0100, Thomas Monjalon wrote:
> > 2015-02-26 13:51, Gleb Natapov:
> > > Did git pull today. After enabling mlnx pmd compilation fails with:
> > >
> > > dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> > > dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> > > eth_dev = rte_eth_dev_allocate(name);
> >
> > Yes, thanks for reporting.
> > I didn't test the disabled mlx4 after hotplug integration:
> > dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
> >
> > Clearly, I have to improve my sanity checks.
> > Sorry for the inconvenience.
> No problem, I fixed that locally, but now I see another issue. I have
> several PMDs statically compiled in with my application and I expect
> dpdk to choose correct one depending on available HW, but mlnx pmd does
> not behave nicely, if its initialization fails it kills entire
> application:
>
> EAL: PCI device 0000:03:00.0 on NUMA socket 0
> EAL: probe driver: 15b3:1003 librte_pmd_mlx4
> EAL: Error - exiting with code: 1
> Cause: Requested device 0000:03:00.0 cannot be used
Forgot to set in-reply-to, but I just sent a patch to work around that
issue and make mlx4 nicer:
http://dpdk.org/dev/patchwork/patch/3796/
--
Adrien Mazarguil
6WIND
^ permalink raw reply [flat|nested] 24+ messages in thread
* Re: [dpdk-dev] [PATCH v3 0/3] Mellanox ConnectX-3 PMD
2015-02-27 18:38 ` Adrien Mazarguil
@ 2015-03-01 11:07 ` Gleb Natapov
0 siblings, 0 replies; 24+ messages in thread
From: Gleb Natapov @ 2015-03-01 11:07 UTC (permalink / raw)
To: Thomas Monjalon, dev
On Fri, Feb 27, 2015 at 07:38:59PM +0100, Adrien Mazarguil wrote:
> On Thu, Feb 26, 2015 at 03:49:07PM +0200, Gleb Natapov wrote:
> > On Thu, Feb 26, 2015 at 02:36:27PM +0100, Thomas Monjalon wrote:
> > > 2015-02-26 13:51, Gleb Natapov:
> > > > Did git pull today. After enabling mlnx pmd compilation fails with:
> > > >
> > > > dpdk/lib/librte_pmd_mlx4/mlx4.c: In function ‘mlx4_pci_devinit’:
> > > > dpdk/lib/librte_pmd_mlx4/mlx4.c:4636:14: error: too few arguments to function ‘rte_eth_dev_allocate’
> > > > eth_dev = rte_eth_dev_allocate(name);
> > >
> > > Yes, thanks for reporting.
> > > I didn't test the disabled mlx4 after hotplug integration:
> > > dpdk.org/browse/dpdk/commit/?id=9f1653e7b7e1746e7c
> > >
> > > Clearly, I have to improve my sanity checks.
> > > Sorry for the inconvenience.
> > No problem, I fixed that locally, but now I see another issue. I have
> > several PMDs statically compiled in with my application and I expect
> > dpdk to choose correct one depending on available HW, but mlnx pmd does
> > not behave nicely, if its initialization fails it kills entire
> > application:
> >
> > EAL: PCI device 0000:03:00.0 on NUMA socket 0
> > EAL: probe driver: 15b3:1003 librte_pmd_mlx4
> > EAL: Error - exiting with code: 1
> > Cause: Requested device 0000:03:00.0 cannot be used
>
> Forgot to set in-reply-to, but I just sent a patch to work around that
> issue and make mlx4 nicer:
>
> http://dpdk.org/dev/patchwork/patch/3796/
>
Works for me, thanks! May be better to change:
"cannot use device, are drivers up to date? To "cannot use device, are
drivers and fw up to date?". On one of my machines that was the case.
I see that some features are missing from the PMD though. Some of them
are nice to have for good performance like providing rss hash value
in mbuf (PKT_RX_RSS_HASH), but others are absolutely required for
my application to work: setting (or at least getting) rss key and
redirection table. Are there any plans to support those?
--
Gleb.
^ permalink raw reply [flat|nested] 24+ messages in thread
* [dpdk-dev] [PATCH v2 2/4] mlx4: new poll mode driver
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (2 preceding siblings ...)
2015-02-21 4:16 ` [dpdk-dev] [PATCH v2 0/4] Mellanox ConnectX-3 PMD Adrien Mazarguil
@ 2015-02-21 4:17 ` Adrien Mazarguil
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 3/4] maintainers: claim responsibility for mlx4 PMD Adrien Mazarguil
` (2 subsequent siblings)
6 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-21 4:17 UTC (permalink / raw)
To: dev
This PMD manages all variants of Mellanox ConnectX-3 (EN 40, EN 10, Pro EN
40) as well as their virtual functions in SR-IOV context through IB Verbs
(libibverbs) and the dedicated user-space driver (libmlx4).
It is disabled by default due to dependencies on these libraries and only
supports Linux userland at the moment partly because /sys (sysfs) support is
required.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
Signed-off-by: Olga Shern <olgas@mellanox.com>
---
config/common_bsdapp | 11 +
config/common_linuxapp | 11 +
lib/Makefile | 1 +
lib/librte_pmd_mlx4/Makefile | 119 ++
lib/librte_pmd_mlx4/mlx4.c | 4739 ++++++++++++++++++++++++++++++++++++++++++
lib/librte_pmd_mlx4/mlx4.h | 166 ++
mk/rte.app.mk | 8 +
7 files changed, 5055 insertions(+)
create mode 100755 lib/librte_pmd_mlx4/Makefile
create mode 100755 lib/librte_pmd_mlx4/mlx4.c
create mode 100644 lib/librte_pmd_mlx4/mlx4.h
diff --git a/config/common_bsdapp b/config/common_bsdapp
index f11ff39..3ba2c79 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -193,6 +193,17 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/config/common_linuxapp b/config/common_linuxapp
index f921d8c..e79559d 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -191,6 +191,17 @@ CONFIG_RTE_LIBRTE_FM10K_DEBUG_DRIVER=n
CONFIG_RTE_LIBRTE_FM10K_RX_OLFLAGS_ENABLE=y
#
+# Compile burst-oriented Mellanox ConnectX-3 (MLX4) PMD
+#
+CONFIG_RTE_LIBRTE_MLX4_PMD=n
+CONFIG_RTE_LIBRTE_MLX4_DEBUG=n
+CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N=4
+CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE=0
+CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE=8
+CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS=1
+CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1
+
+#
# Compile burst-oriented Cisco ENIC PMD driver
#
CONFIG_RTE_LIBRTE_ENIC_PMD=y
diff --git a/lib/Makefile b/lib/Makefile
index 6575a4e..07daf6a 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -45,6 +45,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_E1000_PMD) += librte_pmd_e1000
DIRS-$(CONFIG_RTE_LIBRTE_IXGBE_PMD) += librte_pmd_ixgbe
DIRS-$(CONFIG_RTE_LIBRTE_I40E_PMD) += librte_pmd_i40e
DIRS-$(CONFIG_RTE_LIBRTE_FM10K_PMD) += librte_pmd_fm10k
+DIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += librte_pmd_mlx4
DIRS-$(CONFIG_RTE_LIBRTE_ENIC_PMD) += librte_pmd_enic
DIRS-$(CONFIG_RTE_LIBRTE_PMD_BOND) += librte_pmd_bond
DIRS-$(CONFIG_RTE_LIBRTE_PMD_RING) += librte_pmd_ring
diff --git a/lib/librte_pmd_mlx4/Makefile b/lib/librte_pmd_mlx4/Makefile
new file mode 100755
index 0000000..9a6c891
--- /dev/null
+++ b/lib/librte_pmd_mlx4/Makefile
@@ -0,0 +1,119 @@
+# BSD LICENSE
+#
+# Copyright(c) 2012-2015 6WIND S.A.
+# Copyright(c) 2012 Mellanox.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of 6WIND S.A. nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# Library name.
+LIB = librte_pmd_mlx4.a
+
+# Sources.
+SRCS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += mlx4.c
+
+# Dependencies.
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_ether
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mbuf
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_mempool
+DEPDIRS-$(CONFIG_RTE_LIBRTE_MLX4_PMD) += lib/librte_malloc
+
+# Basic CFLAGS.
+CFLAGS += -O3
+CFLAGS += -std=gnu99 -Wall -Wextra
+CFLAGS += -g
+CFLAGS += -I.
+CFLAGS += -D_XOPEN_SOURCE=600
+CFLAGS += $(WERROR_FLAGS)
+
+# A few warnings cannot be avoided in external headers.
+CFLAGS += -Wno-error=cast-qual
+
+# DEBUG which is usually provided on the command-line may enable
+# CONFIG_RTE_LIBRTE_MLX4_DEBUG.
+ifeq ($(DEBUG),1)
+CONFIG_RTE_LIBRTE_MLX4_DEBUG := y
+endif
+
+# User-defined CFLAGS.
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_DEBUG),y)
+CFLAGS += -pedantic -UNDEBUG -DPEDANTIC
+else
+CFLAGS += -DNDEBUG -UPEDANTIC
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N
+CFLAGS += -DMLX4_PMD_SGE_WR_N=$(CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE
+CFLAGS += -DMLX4_PMD_MAX_INLINE=$(CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE
+CFLAGS += -DMLX4_PMD_TX_MP_CACHE=$(CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS
+CFLAGS += -DMLX4_PMD_SOFT_COUNTERS=$(CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS)
+endif
+
+ifdef CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE
+CFLAGS += -DMLX4_PMD_COMPAT_VMWARE=$(CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE)
+endif
+
+include $(RTE_SDK)/mk/rte.lib.mk
+
+# Generate and clean-up mlx4_autoconf.h.
+
+export CC CFLAGS CPPFLAGS EXTRA_CFLAGS EXTRA_CPPFLAGS
+export AUTO_CONFIG_CFLAGS = -Wno-error
+
+mlx4_autoconf.h: $(RTE_SDK)/scripts/auto-config-h.sh
+ $Q $(RM) -f -- '$@'
+ $Q sh -- '$<' '$@' \
+ RSS_SUPPORT \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_UD_RSS
+ $Q sh -- '$<' '$@' \
+ INLINE_RECV \
+ infiniband/verbs.h \
+ enum IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ
+ $Q sh -- '$<' '$@' \
+ SEND_RAW_WR_SUPPORT \
+ infiniband/verbs.h \
+ type 'struct ibv_send_wr_raw'
+
+mlx4.o: mlx4_autoconf.h
+
+clean_mlx4: FORCE
+ $Q rm -f -- mlx4_autoconf.h
+
+clean: clean_mlx4
diff --git a/lib/librte_pmd_mlx4/mlx4.c b/lib/librte_pmd_mlx4/mlx4.c
new file mode 100755
index 0000000..23cea1d
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.c
@@ -0,0 +1,4739 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012-2015 6WIND S.A.
+ * Copyright(c) 2012 Mellanox.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Known limitations:
+ * - Multiple RX VLAN filters can be configured, but only the first one
+ * works properly.
+ * - RSS hash key and options cannot be modified.
+ * - Hardware counters aren't implemented.
+ */
+
+/* System headers. */
+#include <stddef.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <string.h>
+#include <errno.h>
+#include <unistd.h>
+#include <limits.h>
+#include <assert.h>
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <dirent.h>
+#include <sys/ioctl.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <linux/if.h>
+#include <linux/ethtool.h>
+#include <linux/sockios.h>
+
+/* DPDK headers don't like -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+#include <rte_config.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_dev.h>
+#include <rte_mbuf.h>
+#include <rte_errno.h>
+#include <rte_mempool.h>
+#include <rte_prefetch.h>
+#include <rte_malloc.h>
+#include <rte_spinlock.h>
+#include <rte_atomic.h>
+#include <rte_version.h>
+#include <rte_log.h>
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Verbs header. */
+/* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
+#ifdef PEDANTIC
+#pragma GCC diagnostic ignored "-pedantic"
+#endif
+
+#include <infiniband/verbs.h>
+
+#ifdef PEDANTIC
+#pragma GCC diagnostic error "-pedantic"
+#endif
+
+/* Generated configuration header. */
+#include "mlx4_autoconf.h"
+
+/* PMD header. */
+#include "mlx4.h"
+
+/* Runtime logging through RTE_LOG() is enabled when not in debugging mode.
+ * Intermediate LOG_*() macros add the required end-of-line characters. */
+#ifndef NDEBUG
+#define INFO(...) DEBUG(__VA_ARGS__)
+#define WARN(...) DEBUG(__VA_ARGS__)
+#define ERROR(...) DEBUG(__VA_ARGS__)
+#else
+#define LOG__(level, m, ...) \
+ RTE_LOG(level, PMD, MLX4_DRIVER_NAME ": " m "%c", __VA_ARGS__)
+#define LOG_(level, ...) LOG__(level, __VA_ARGS__, '\n')
+#define INFO(...) LOG_(INFO, __VA_ARGS__)
+#define WARN(...) LOG_(WARNING, __VA_ARGS__)
+#define ERROR(...) LOG_(ERR, __VA_ARGS__)
+#endif
+
+/* Convenience macros for accessing mbuf fields. */
+#define NEXT(m) (m)->next
+#define DATA_LEN(m) (m)->data_len
+#define PKT_LEN(m) (m)->pkt_len
+#define DATA_OFF(m) (m)->data_off
+#define SET_DATA_OFF(m, o) ((m)->data_off = (o))
+#define NB_SEGS(m) (m)->nb_segs
+#define PORT(m) (m)->port
+
+/* Work Request ID data type (64 bit). */
+typedef union {
+ struct {
+ uint32_t id;
+ uint16_t offset;
+ } data;
+ uint64_t raw;
+} wr_id_t;
+
+#define WR_ID(o) ((wr_id_t *)&(o))->data
+
+/* Compile-time check. */
+static inline void wr_id_t_check(void)
+{
+ wr_id_t check[1 + (2 * -!(sizeof(wr_id_t) == sizeof(uint64_t)))];
+
+ (void)check;
+ (void)wr_id_t_check;
+}
+
+/* If raw send operations are available, use them since they are faster. */
+#ifdef SEND_RAW_WR_SUPPORT
+typedef struct ibv_send_wr_raw mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send_raw
+#else
+typedef struct ibv_send_wr mlx4_send_wr_t;
+#define mlx4_post_send ibv_post_send
+#endif
+
+struct mlx4_rxq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t ipackets; /**< Total of successfully received packets. */
+ uint64_t ibytes; /**< Total of successfully received bytes. */
+#endif
+ uint64_t idropped; /**< Total of packets dropped when RX ring full. */
+ uint64_t rx_nombuf; /**< Total of RX mbuf allocation failures. */
+};
+
+struct mlx4_txq_stats {
+ unsigned int idx; /**< Mapping index. */
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ uint64_t opackets; /**< Total of successfully sent packets. */
+ uint64_t obytes; /**< Total of successfully sent bytes. */
+#endif
+ uint64_t odropped; /**< Total of packets not sent when TX ring full. */
+};
+
+/* RX element (scattered packets). */
+struct rxq_elt_sp {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ struct rte_mbuf *bufs[MLX4_PMD_SGE_WR_N]; /* SGEs buffers. */
+};
+
+/* RX element. */
+struct rxq_elt {
+ struct ibv_recv_wr wr; /* Work Request. */
+ struct ibv_sge sge; /* Scatter/Gather Element. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* RX queue descriptor. */
+struct rxq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct rte_mempool *mp; /* Memory Pool for allocations. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+ /*
+ * There is exactly one flow configured per MAC address. Each flow
+ * may contain several specifications, one per configured VLAN ID.
+ */
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ struct ibv_exp_flow *mac_flow[MLX4_MAX_MAC_ADDRESSES];
+ struct ibv_exp_flow *promisc_flow; /* Promiscuous flow. */
+ struct ibv_exp_flow *allmulti_flow; /* Multicast flow. */
+ unsigned int port_id; /* Port ID for incoming packets. */
+ unsigned int elts_n; /* (*elts)[] length. */
+ union {
+ struct rxq_elt_sp (*sp)[]; /* Scattered RX elements. */
+ struct rxq_elt (*no_sp)[]; /* RX elements. */
+ } elts;
+ unsigned int sp:1; /* Use scattered RX elements. */
+ uint32_t mb_len; /* Length of a mp-issued mbuf. */
+ struct mlx4_rxq_stats stats; /* RX queue counters. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+/* TX element. */
+struct txq_elt {
+ mlx4_send_wr_t wr; /* Work Request. */
+ struct ibv_sge sges[MLX4_PMD_SGE_WR_N]; /* Scatter/Gather Elements. */
+ /* mbuf pointer is derived from WR_ID(wr.wr_id).offset. */
+};
+
+/* Linear buffer type. It is used when transmitting buffers with too many
+ * segments that do not fit the hardware queue (see max_send_sge).
+ * Extra segments are copied (linearized) in such buffers, replacing the
+ * last SGE during TX.
+ * The size is arbitrary but large enough to hold a jumbo frame with
+ * 8 segments considering mbuf.buf_len is about 2048 bytes. */
+typedef uint8_t linear_t[16384];
+
+/* TX queue descriptor. */
+struct txq {
+ struct priv *priv; /* Back pointer to private data. */
+ struct {
+ struct rte_mempool *mp; /* Cached Memory Pool. */
+ struct ibv_mr *mr; /* Memory Region (for mp). */
+ uint32_t lkey; /* mr->lkey */
+ } mp2mr[MLX4_PMD_TX_MP_CACHE]; /* MP to MR translation table. */
+ struct ibv_cq *cq; /* Completion Queue. */
+ struct ibv_qp *qp; /* Queue Pair. */
+#if MLX4_PMD_MAX_INLINE > 0
+ uint32_t max_inline; /* Max inline send size <= MLX4_PMD_MAX_INLINE. */
+#endif
+ unsigned int elts_n; /* (*elts)[] length. */
+ struct txq_elt (*elts)[]; /* TX elements. */
+ unsigned int elts_head; /* Current index in (*elts)[]. */
+ unsigned int elts_tail; /* First element awaiting completion. */
+ unsigned int elts_comp; /* Number of completion requests. */
+ struct mlx4_txq_stats stats; /* TX queue counters. */
+ linear_t (*elts_linear)[]; /* Linearized buffers. */
+ struct ibv_mr *mr_linear; /* Memory Region for linearized buffers. */
+ unsigned int socket; /* CPU socket ID for allocations. */
+};
+
+struct priv {
+ struct rte_eth_dev *dev; /* Ethernet device. */
+ struct ibv_context *ctx; /* Verbs context. */
+ struct ibv_device_attr device_attr; /* Device properties. */
+ struct ibv_port_attr port_attr; /* Physical port properties. */
+ struct ibv_pd *pd; /* Protection Domain. */
+ /*
+ * MAC addresses array and configuration bit-field.
+ * An extra entry that cannot be modified by the DPDK is reserved
+ * for broadcast frames (destination MAC address ff:ff:ff:ff:ff:ff).
+ */
+ struct ether_addr mac[MLX4_MAX_MAC_ADDRESSES];
+ BITFIELD_DECLARE(mac_configured, uint32_t, MLX4_MAX_MAC_ADDRESSES);
+ /* VLAN filters. */
+ struct {
+ unsigned int enabled:1; /* If enabled. */
+ unsigned int id:12; /* VLAN ID (0-4095). */
+ } vlan_filter[MLX4_MAX_VLAN_IDS]; /* VLAN filters table. */
+ /* Device properties. */
+ uint16_t mtu; /* Configured MTU. */
+ uint8_t port; /* Physical port number. */
+ unsigned int started:1; /* Device started, flows enabled. */
+ unsigned int promisc:1; /* Device in promiscuous mode. */
+ unsigned int promisc_ok:1; /* Promiscuous flow is supported. */
+ unsigned int allmulti:1; /* Device receives all multicast packets. */
+ unsigned int hw_qpg:1; /* QP groups are supported. */
+ unsigned int hw_tss:1; /* TSS is supported. */
+ unsigned int hw_rss:1; /* RSS is supported. */
+ unsigned int rss:1; /* RSS is enabled. */
+#ifdef MLX4_COMPAT_VMWARE
+ unsigned int vmware:1; /* Use VMware compatibility. */
+#endif
+ unsigned int vf:1; /* This is a VF device. */
+#ifdef INLINE_RECV
+ unsigned int inl_recv_size; /* Inline recv size */
+#endif
+ unsigned int max_rss_tbl_sz; /* Maximum number of RSS queues. */
+ /* RX/TX queues. */
+ struct rxq rxq_parent; /* Parent queue when RSS is enabled. */
+ unsigned int rxqs_n; /* RX queues array size. */
+ unsigned int txqs_n; /* TX queues array size. */
+ struct rxq *(*rxqs)[]; /* RX queues. */
+ struct txq *(*txqs)[]; /* TX queues. */
+ rte_spinlock_t lock; /* Lock for control functions. */
+};
+
+/**
+ * Lock private structure to protect it from concurrent access in the
+ * control path.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_lock(struct priv *priv)
+{
+ rte_spinlock_lock(&priv->lock);
+}
+
+/**
+ * Unlock private structure.
+ *
+ * @param priv
+ * Pointer to private structure.
+ */
+static void
+priv_unlock(struct priv *priv)
+{
+ rte_spinlock_unlock(&priv->lock);
+}
+
+/* Allocate a buffer on the stack and fill it with a printf format string. */
+#define MKSTR(name, ...) \
+ char name[snprintf(NULL, 0, __VA_ARGS__) + 1]; \
+ \
+ snprintf(name, sizeof(name), __VA_ARGS__)
+
+/**
+ * Get interface name from private structure.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[out] ifname
+ * Interface name output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_ifname(const struct priv *priv, char (*ifname)[IF_NAMESIZE])
+{
+ int ret = -1;
+ DIR *dir;
+ struct dirent *dent;
+
+ {
+ MKSTR(path, "%s/device/net", priv->ctx->device->ibdev_path);
+
+ dir = opendir(path);
+ if (dir == NULL)
+ return -1;
+ }
+ while ((dent = readdir(dir)) != NULL) {
+ char *name = dent->d_name;
+ FILE *file;
+ unsigned int dev_id;
+ int r;
+
+ if ((name[0] == '.') &&
+ ((name[1] == '\0') ||
+ ((name[1] == '.') && (name[2] == '\0'))))
+ continue;
+
+ MKSTR(path, "%s/device/net/%s/dev_id",
+ priv->ctx->device->ibdev_path, name);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ continue;
+ r = fscanf(file, "%x", &dev_id);
+ fclose(file);
+ if ((r == 1) && (dev_id == (priv->port - 1u))) {
+ snprintf(*ifname, sizeof(*ifname), "%s", name);
+ ret = 0;
+ break;
+ }
+ }
+ closedir(dir);
+ return ret;
+}
+
+/**
+ * Read from sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[out] buf
+ * Data output buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_read(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ ret = fread(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) && (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Write to sysfs entry.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param[in] entry
+ * Entry name relative to sysfs path.
+ * @param[in] buf
+ * Data buffer.
+ * @param size
+ * Buffer size.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_sysfs_write(const struct priv *priv, const char *entry,
+ char *buf, size_t size)
+{
+ char ifname[IF_NAMESIZE];
+ FILE *file;
+ int ret;
+ int err;
+
+ if (priv_get_ifname(priv, &ifname))
+ return -1;
+
+ MKSTR(path, "%s/device/net/%s/%s", priv->ctx->device->ibdev_path,
+ ifname, entry);
+
+ file = fopen(path, "wb");
+ if (file == NULL)
+ return -1;
+ ret = fwrite(buf, 1, size, file);
+ err = errno;
+ if (((size_t)ret < size) || (ferror(file)))
+ ret = -1;
+ else
+ ret = size;
+ fclose(file);
+ errno = err;
+ return ret;
+}
+
+/**
+ * Get unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param[out] value
+ * Value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_sysfs_ulong(struct priv *priv, const char *name, unsigned long *value)
+{
+ int ret;
+ unsigned long value_ret;
+ char value_str[32];
+
+ ret = priv_sysfs_read(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot read %s value from sysfs: %s",
+ name, strerror(errno));
+ return -1;
+ }
+ value_str[ret] = '\0';
+ errno = 0;
+ value_ret = strtoul(value_str, NULL, 0);
+ if (errno) {
+ DEBUG("invalid %s value `%s': %s", name, value_str,
+ strerror(errno));
+ return -1;
+ }
+ *value = value_ret;
+ return 0;
+}
+
+/**
+ * Set unsigned long sysfs property.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[in] name
+ * Entry name relative to sysfs path.
+ * @param value
+ * Value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_sysfs_ulong(struct priv *priv, const char *name, unsigned long value)
+{
+ int ret;
+ MKSTR(value_str, "%lu", value);
+
+ ret = priv_sysfs_write(priv, name, value_str, (sizeof(value_str) - 1));
+ if (ret == -1) {
+ DEBUG("cannot write %s `%s' (%lu) to sysfs: %s",
+ name, value_str, value, strerror(errno));
+ return -1;
+ }
+ return 0;
+}
+
+/**
+ * Perform ifreq ioctl() on associated Ethernet device.
+ *
+ * @param[in] priv
+ * Pointer to private structure.
+ * @param req
+ * Request number to pass to ioctl().
+ * @param[out] ifr
+ * Interface request structure output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_ifreq(const struct priv *priv, int req, struct ifreq *ifr)
+{
+ int sock = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
+ int ret = -1;
+
+ if (sock == -1)
+ return ret;
+ if (priv_get_ifname(priv, &ifr->ifr_name) == 0)
+ ret = ioctl(sock, req, ifr);
+ close(sock);
+ return ret;
+}
+
+/**
+ * Get device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param[out] mtu
+ * MTU value output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_get_mtu(struct priv *priv, uint16_t *mtu)
+{
+ unsigned long ulong_mtu;
+
+ if (priv_get_sysfs_ulong(priv, "mtu", &ulong_mtu) == -1)
+ return -1;
+ *mtu = ulong_mtu;
+ return 0;
+}
+
+/**
+ * Set device MTU.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mtu
+ * MTU value to set.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_mtu(struct priv *priv, uint16_t mtu)
+{
+ return priv_set_sysfs_ulong(priv, "mtu", mtu);
+}
+
+/**
+ * Set device flags.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param keep
+ * Bitmask for flags that must remain untouched.
+ * @param flags
+ * Bitmask for flags to modify.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+priv_set_flags(struct priv *priv, unsigned int keep, unsigned int flags)
+{
+ unsigned long tmp;
+
+ if (priv_get_sysfs_ulong(priv, "flags", &tmp) == -1)
+ return -1;
+ tmp &= keep;
+ tmp |= flags;
+ return priv_set_sysfs_ulong(priv, "flags", tmp);
+}
+
+/* Device configuration. */
+
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp);
+
+static void
+rxq_cleanup(struct rxq *rxq);
+
+/**
+ * Ethernet device configuration.
+ *
+ * Prepare the driver for a given number of TX and RX queues.
+ * Allocate parent RSS queue when several RX queues are requested.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int rxqs_n = dev->data->nb_rx_queues;
+ unsigned int txqs_n = dev->data->nb_tx_queues;
+ unsigned int tmp;
+ int ret;
+
+ priv->rxqs = (void *)dev->data->rx_queues;
+ priv->txqs = (void *)dev->data->tx_queues;
+ if (txqs_n != priv->txqs_n) {
+ INFO("%p: TX queues number update: %u -> %u",
+ (void *)dev, priv->txqs_n, txqs_n);
+ priv->txqs_n = txqs_n;
+ }
+ if (rxqs_n == priv->rxqs_n)
+ return 0;
+ INFO("%p: RX queues number update: %u -> %u",
+ (void *)dev, priv->rxqs_n, rxqs_n);
+ /* If RSS is enabled, disable it first. */
+ if (priv->rss) {
+ unsigned int i;
+
+ /* Only if there are no remaining child RX queues. */
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ return EINVAL;
+ rxq_cleanup(&priv->rxq_parent);
+ priv->rss = 0;
+ priv->rxqs_n = 0;
+ }
+ if (rxqs_n <= 1) {
+ /* Nothing else to do. */
+ priv->rxqs_n = rxqs_n;
+ return 0;
+ }
+ /* Allocate a new RSS parent queue if supported by hardware. */
+ if (!priv->hw_rss) {
+ ERROR("%p: only a single RX queue can be configured when"
+ " hardware doesn't support RSS",
+ (void *)dev);
+ return EINVAL;
+ }
+ /* Fail if hardware doesn't support that many RSS queues. */
+ if (rxqs_n >= priv->max_rss_tbl_sz) {
+ ERROR("%p: only %u RX queues can be configured for RSS",
+ (void *)dev, priv->max_rss_tbl_sz);
+ return EINVAL;
+ }
+ priv->rss = 1;
+ tmp = priv->rxqs_n;
+ priv->rxqs_n = rxqs_n;
+ ret = rxq_setup(dev, &priv->rxq_parent, 0, 0, NULL, NULL);
+ if (!ret)
+ return 0;
+ /* Failure, rollback. */
+ priv->rss = 0;
+ priv->rxqs_n = tmp;
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback for Ethernet device configuration.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_configure(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = dev_configure(dev);
+ assert(ret >= 0);
+ priv_unlock(priv);
+ return -ret;
+}
+
+/* TX queues handling. */
+
+/**
+ * Allocate TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_alloc_elts(struct txq *txq, unsigned int elts_n)
+{
+ unsigned int i;
+ struct txq_elt (*elts)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts), 0, txq->socket);
+ linear_t (*elts_linear)[elts_n] =
+ rte_calloc_socket("TXQ", 1, sizeof(*elts_linear), 0,
+ txq->socket);
+ struct ibv_mr *mr_linear = NULL;
+ int ret = 0;
+
+ if ((elts == NULL) || (elts_linear == NULL)) {
+ ERROR("%p: can't allocate packets array", (void *)txq);
+ ret = ENOMEM;
+ goto error;
+ }
+ mr_linear =
+ ibv_reg_mr(txq->priv->pd, elts_linear, sizeof(*elts_linear),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (mr_linear == NULL) {
+ ERROR("%p: unable to configure MR, ibv_reg_mr() failed",
+ (void *)txq);
+ ret = EINVAL;
+ goto error;
+ }
+ for (i = 0; (i != elts_n); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+ mlx4_send_wr_t *wr = &elt->wr;
+
+ /* Configure WR. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset = 0;
+ wr->sg_list = &elt->sges[0];
+ wr->opcode = IBV_WR_SEND;
+ /* Other fields are updated during TX. */
+ }
+ DEBUG("%p: allocated and configured %u WRs", (void *)txq, elts_n);
+ txq->elts_n = elts_n;
+ txq->elts = elts;
+ txq->elts_head = 0;
+ txq->elts_tail = 0;
+ txq->elts_comp = 0;
+ txq->elts_linear = elts_linear;
+ txq->mr_linear = mr_linear;
+ assert(ret == 0);
+ return 0;
+error:
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts != NULL)
+ rte_free(elts);
+ DEBUG("%p: failed, freed everything", (void *)txq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free TX queue elements.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_free_elts(struct txq *txq)
+{
+ unsigned int i;
+ unsigned int elts_n = txq->elts_n;
+ struct txq_elt (*elts)[elts_n] = txq->elts;
+ linear_t (*elts_linear)[elts_n] = txq->elts_linear;
+ struct ibv_mr *mr_linear = txq->mr_linear;
+
+ DEBUG("%p: freeing WRs", (void *)txq);
+ txq->elts_n = 0;
+ txq->elts = NULL;
+ txq->elts_linear = NULL;
+ txq->mr_linear = NULL;
+ if (mr_linear != NULL)
+ claim_zero(ibv_dereg_mr(mr_linear));
+ if (elts_linear != NULL)
+ rte_free(elts_linear);
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct txq_elt *elt = &(*elts)[i];
+
+ if (WR_ID(elt->wr.wr_id).offset == 0)
+ continue;
+ rte_pktmbuf_free((void *)(elt->sges[0].addr -
+ WR_ID(elt->wr.wr_id).offset));
+ }
+ rte_free(elts);
+}
+
+
+/**
+ * Clean up a TX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ */
+static void
+txq_cleanup(struct txq *txq)
+{
+ size_t i;
+
+ DEBUG("cleaning up %p", (void *)txq);
+ txq_free_elts(txq);
+ if (txq->qp != NULL)
+ claim_zero(ibv_destroy_qp(txq->qp));
+ if (txq->cq != NULL)
+ claim_zero(ibv_destroy_cq(txq->cq));
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (txq->mp2mr[i].mp == NULL)
+ break;
+ assert(txq->mp2mr[i].mr != NULL);
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ }
+ memset(txq, 0, sizeof(*txq));
+}
+
+/**
+ * Manage TX completions.
+ *
+ * When sending a burst, mlx4_tx_burst() posts several WRs.
+ * To improve performance, a completion event is only required for the last of
+ * them. Doing so discards completion information for other WRs, but this
+ * information would not be used anyway.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ *
+ * @return
+ * 0 on success, -1 on failure.
+ */
+static int
+txq_complete(struct txq *txq)
+{
+ unsigned int elts_comp = txq->elts_comp;
+ unsigned int elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ struct ibv_wc wcs[elts_comp];
+ int wcs_n;
+
+ if (unlikely(elts_comp == 0))
+ return 0;
+#ifdef DEBUG_SEND
+ DEBUG("%p: processing %u work requests completions",
+ (void *)txq, elts_comp);
+#endif
+ wcs_n = ibv_poll_cq(txq->cq, elts_comp, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("%p: ibv_poll_cq() failed (wcs_n=%d)",
+ (void *)txq, wcs_n);
+ return -1;
+ }
+ elts_comp -= wcs_n;
+ assert(elts_comp <= txq->elts_comp);
+ /*
+ * Work Completion ID contains the associated element index in
+ * (*txq->elts)[]. Since WCs are returned in order, we only need to
+ * look at the last WC to clear older Work Requests.
+ *
+ * Assume WC status is successful as nothing can be done about it
+ * anyway.
+ */
+ elts_tail = WR_ID(wcs[wcs_n - 1].wr_id).id;
+ /* Consume the last WC. */
+ if (++elts_tail >= elts_n)
+ elts_tail = 0;
+ txq->elts_tail = elts_tail;
+ txq->elts_comp = elts_comp;
+ return 0;
+}
+
+/**
+ * Get Memory Region (MR) <-> Memory Pool (MP) association from txq->mp2mr[].
+ * Add MP to txq->mp2mr[] if it's not registered yet. If mp2mr[] is full,
+ * remove an entry first.
+ *
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param[in] mp
+ * Memory Pool for which a Memory Region lkey must be returned.
+ *
+ * @return
+ * mr->lkey on success, (uint32_t)-1 on failure.
+ */
+static uint32_t
+txq_mp2mr(struct txq *txq, struct rte_mempool *mp)
+{
+ unsigned int i;
+ struct ibv_mr *mr;
+
+ for (i = 0; (i != elemof(txq->mp2mr)); ++i) {
+ if (unlikely(txq->mp2mr[i].mp == NULL)) {
+ /* Unknown MP, add a new MR for it. */
+ break;
+ }
+ if (txq->mp2mr[i].mp == mp) {
+ assert(txq->mp2mr[i].lkey != (uint32_t)-1);
+ assert(txq->mp2mr[i].mr->lkey == txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+ }
+ }
+ /* Add a new entry, register MR first. */
+ DEBUG("%p: discovered new memory pool %p", (void *)txq, (void *)mp);
+ mr = ibv_reg_mr(txq->priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE | IBV_ACCESS_REMOTE_WRITE));
+ if (unlikely(mr == NULL)) {
+ DEBUG("%p: unable to configure MR, ibv_reg_mr() failed.",
+ (void *)txq);
+ return (uint32_t)-1;
+ }
+ if (unlikely(i == elemof(txq->mp2mr))) {
+ /* Table is full, remove oldest entry. */
+ DEBUG("%p: MR <-> MP table full, dropping oldest entry.",
+ (void *)txq);
+ --i;
+ claim_zero(ibv_dereg_mr(txq->mp2mr[i].mr));
+ memmove(&txq->mp2mr[0], &txq->mp2mr[1],
+ (sizeof(txq->mp2mr) - sizeof(txq->mp2mr[0])));
+ }
+ /* Store the new entry. */
+ txq->mp2mr[i].mp = mp;
+ txq->mp2mr[i].mr = mr;
+ txq->mp2mr[i].lkey = mr->lkey;
+ DEBUG("%p: new MR lkey for MP %p: 0x%08" PRIu32,
+ (void *)txq, (void *)mp, txq->mp2mr[i].lkey);
+ return txq->mp2mr[i].lkey;
+}
+
+/**
+ * Copy scattered mbuf contents to a single linear buffer.
+ *
+ * @param[out] linear
+ * Linear output buffer.
+ * @param[in] buf
+ * Scattered input buffer.
+ *
+ * @return
+ * Number of bytes copied to the output buffer or 0 if not large enough.
+ */
+static unsigned int
+linearize_mbuf(linear_t *linear, struct rte_mbuf *buf)
+{
+ unsigned int size = 0;
+ unsigned int offset;
+
+ do {
+ unsigned int len = DATA_LEN(buf);
+
+ offset = size;
+ size += len;
+ if (unlikely(size > sizeof(*linear)))
+ return 0;
+ memcpy(&(*linear)[offset],
+ rte_pktmbuf_mtod(buf, uint8_t *),
+ len);
+ buf = NEXT(buf);
+ }
+ while (buf != NULL);
+ return size;
+}
+
+/**
+ * DPDK callback for TX.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+mlx4_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ mlx4_send_wr_t head;
+ mlx4_send_wr_t **wr_next = &head.next;
+ mlx4_send_wr_t *bad_wr;
+ unsigned int elts_head = txq->elts_head;
+ const unsigned int elts_tail = txq->elts_tail;
+ const unsigned int elts_n = txq->elts_n;
+ unsigned int i;
+ unsigned int max;
+ int err;
+
+ txq_complete(txq);
+ max = (elts_n - (elts_head - elts_tail));
+ if (max > elts_n)
+ max -= elts_n;
+ assert(max >= 1);
+ assert(max <= elts_n);
+ /* Always leave one free entry in the ring. */
+ --max;
+ if (max == 0)
+ return 0;
+ if (max > pkts_n)
+ max = pkts_n;
+ for (i = 0; (i != max); ++i) {
+ struct rte_mbuf *buf = pkts[i];
+ struct txq_elt *elt = &(*txq->elts)[elts_head];
+ mlx4_send_wr_t *wr = &elt->wr;
+ unsigned int segs = NB_SEGS(buf);
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ unsigned int sent_size = 0;
+#endif
+ unsigned int j;
+ int linearize = 0;
+
+ /* Clean up old buffer. */
+ if (likely(WR_ID(wr->wr_id).offset != 0)) {
+ struct rte_mbuf *tmp = (void *)
+ (elt->sges[0].addr - WR_ID(wr->wr_id).offset);
+
+ /* Faster than rte_pktmbuf_free(). */
+ do {
+ struct rte_mbuf *next = NEXT(tmp);
+
+ rte_pktmbuf_free_seg(tmp);
+ tmp = next;
+ }
+ while (tmp != NULL);
+ }
+#ifndef NDEBUG
+ /* For assert(). */
+ WR_ID(wr->wr_id).offset = 0;
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ /* Sanity checks, most of which are only relevant with
+ * debugging enabled. */
+ assert(WR_ID(wr->wr_id).id == elts_head);
+ assert(WR_ID(wr->wr_id).offset == 0);
+ assert(wr->next == NULL);
+ assert(wr->sg_list == &elt->sges[0]);
+ assert(wr->num_sge == 0);
+ assert(wr->opcode == IBV_WR_SEND);
+ /* When there are too many segments, extra segments are
+ * linearized in the last SGE. */
+ if (unlikely(segs > elemof(elt->sges))) {
+ segs = (elemof(elt->sges) - 1);
+ linearize = 1;
+ }
+ /* Set WR fields. */
+ assert(((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf) <= 0xffff);
+ WR_ID(wr->wr_id).offset =
+ ((uintptr_t)rte_pktmbuf_mtod(buf, char *) -
+ (uintptr_t)buf);
+ wr->num_sge = segs;
+ /* Register segments as SGEs. */
+ for (j = 0; (j != segs); ++j) {
+ struct ibv_sge *sge = &elt->sges[j];
+ uint32_t lkey;
+
+ /* Retrieve Memory Region key for this memory pool. */
+ lkey = txq_mp2mr(txq, buf->pool);
+ if (unlikely(lkey == (uint32_t)-1)) {
+ /* MR does not exist. */
+ DEBUG("%p: unable to get MP <-> MR"
+ " association", (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf, char *);
+ if (txq->priv->vf)
+ rte_prefetch0((volatile void *)sge->addr);
+ sge->length = DATA_LEN(buf);
+ sge->lkey = lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += sge->length;
+#endif
+ buf = NEXT(buf);
+ }
+ /* If buf is not NULL here and is not going to be linearized,
+ * nb_segs is not valid. */
+ assert(j == segs);
+ assert((buf == NULL) || (linearize));
+ /* Linearize extra segments. */
+ if (linearize) {
+ struct ibv_sge *sge = &elt->sges[segs];
+ linear_t *linear = &(*txq->elts_linear)[elts_head];
+ unsigned int size = linearize_mbuf(linear, buf);
+
+ assert(segs == (elemof(elt->sges) - 1));
+ if (size == 0) {
+ /* Invalid packet. */
+ DEBUG("%p: packet too large to be linearized.",
+ (void *)txq);
+ /* Clean up TX element. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifndef NDEBUG
+ /* For assert(). */
+ while (j) {
+ --j;
+ --sge;
+ sge->addr = 0;
+ sge->length = 0;
+ sge->lkey = 0;
+ }
+ wr->num_sge = 0;
+#endif
+ goto stop;
+ }
+ /* If MLX4_PMD_SGE_WR_N is 1, free mbuf immediately
+ * and clear offset from WR ID. */
+ if (elemof(elt->sges) == 1) {
+ do {
+ struct rte_mbuf *next = NEXT(buf);
+
+ rte_pktmbuf_free_seg(buf);
+ buf = next;
+ }
+ while (buf != NULL);
+ WR_ID(wr->wr_id).offset = 0;
+ }
+ /* Set WR fields and fill SGE with linear buffer. */
+ ++wr->num_sge;
+ /* Sanity checks, only relevant with debugging
+ * enabled. */
+ assert(sge->addr == 0);
+ assert(sge->length == 0);
+ assert(sge->lkey == 0);
+ /* Update SGE. */
+ sge->addr = (uintptr_t)&(*linear)[0];
+ sge->length = size;
+ sge->lkey = txq->mr_linear->lkey;
+#if (MLX4_PMD_MAX_INLINE > 0) || defined(MLX4_PMD_SOFT_COUNTERS)
+ sent_size += size;
+#endif
+ }
+ /* Link WRs together for ibv_post_send(). */
+ *wr_next = wr;
+ wr_next = &wr->next;
+#if MLX4_PMD_MAX_INLINE > 0
+ if (sent_size <= txq->max_inline)
+ wr->send_flags = IBV_SEND_INLINE;
+ else
+#endif
+ wr->send_flags = 0;
+ if (++elts_head >= elts_n)
+ elts_head = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent bytes counter. */
+ txq->stats.obytes += sent_size;
+#endif
+ }
+stop:
+ /* Take a shortcut if nothing must be sent. */
+ if (unlikely(i == 0))
+ return 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increment sent packets counter. */
+ txq->stats.opackets += i;
+#endif
+ *wr_next = NULL;
+ /* The last WR is the only one asking for a completion event. */
+ containerof(wr_next, mlx4_send_wr_t, next)->
+ send_flags |= IBV_SEND_SIGNALED;
+ err = mlx4_post_send(txq->qp, head.next, &bad_wr);
+ if (unlikely(err)) {
+ unsigned int unsent = 0;
+
+ /* An error occured, completion event is lost. Fix counters. */
+ while (bad_wr != NULL) {
+ struct txq_elt *elt =
+ containerof(bad_wr, struct txq_elt, wr);
+ mlx4_send_wr_t *wr = &elt->wr;
+ mlx4_send_wr_t *next = wr->next;
+#if defined(MLX4_PMD_SOFT_COUNTERS) || !defined(NDEBUG)
+ unsigned int j;
+#endif
+
+ assert(wr == bad_wr);
+ /* Clean up TX element without freeing it, caller
+ * should take care of this. */
+ WR_ID(elt->wr.wr_id).offset = 0;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ for (j = 0; ((int)j < wr->num_sge); ++j)
+ txq->stats.obytes -= wr->sg_list[j].length;
+#endif
+ ++unsent;
+#ifndef NDEBUG
+ /* For assert(). */
+ for (j = 0; ((int)j < wr->num_sge); ++j) {
+ elt->sges[j].addr = 0;
+ elt->sges[j].length = 0;
+ elt->sges[j].lkey = 0;
+ }
+ wr->next = NULL;
+ wr->num_sge = 0;
+#endif
+ bad_wr = next;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ txq->stats.opackets -= unsent;
+#endif
+ assert(i >= unsent);
+ i -= unsent;
+ /* "Unsend" remaining packets. */
+ elts_head -= unsent;
+ if (elts_head >= elts_n)
+ elts_head += elts_n;
+ assert(elts_head < elts_n);
+ DEBUG("%p: mlx4_post_send() failed, %u unprocessed WRs: %s",
+ (void *)txq, unsent,
+ ((err <= -1) ? "Internal error" : strerror(err)));
+ }
+ else
+ ++txq->elts_comp;
+ txq->elts_head = elts_head;
+ return i;
+}
+
+/**
+ * Configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param txq
+ * Pointer to TX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+txq_setup(struct rte_eth_dev *dev, struct txq *txq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq tmpl = {
+ .priv = priv,
+ .socket = socket
+ };
+ union {
+ struct ibv_qp_init_attr init;
+ struct ibv_exp_qp_attr mod;
+ } attr;
+ int ret = 0;
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of TX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ desc /= MLX4_PMD_SGE_WR_N;
+ /* MRs will be registered in mp2mr[] later. */
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+ attr.init = (struct ibv_qp_init_attr){
+ /* CQ to be associated with the send queue. */
+ .send_cq = tmpl.cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = tmpl.cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_send_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_send_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+#if MLX4_PMD_MAX_INLINE > 0
+ .max_inline_data = MLX4_PMD_MAX_INLINE,
+#endif
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ /* Do *NOT* enable this, completions events are managed per
+ * TX burst. */
+ .sq_sig_all = 0
+ };
+ tmpl.qp = ibv_create_qp(priv->pd, &attr.init);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+#if MLX4_PMD_MAX_INLINE > 0
+ /* ibv_create_qp() updates this value. */
+ tmpl.max_inline = attr.init.cap.max_inline_data;
+#endif
+ attr.mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod,
+ (IBV_EXP_QP_STATE | IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((ret = txq_alloc_elts(&tmpl, desc))) {
+ ERROR("%p: TXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ attr.mod.qp_state = IBV_QPS_RTS;
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &attr.mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTS failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Clean up txq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old txq just in case", (void *)txq);
+ txq_cleanup(txq);
+ *txq = tmpl;
+ DEBUG("%p: txq updated with %p", (void *)txq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ txq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a TX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * TX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_tx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_txconf *conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct txq *txq = (*priv->txqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->txqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->txqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (txq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)txq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->txqs)[idx] = NULL;
+ txq_cleanup(txq);
+ }
+ else {
+ txq = rte_calloc_socket("TXQ", 1, sizeof(*txq), 0, socket);
+ if (txq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = txq_setup(dev, txq, desc, socket, conf);
+ if (ret)
+ rte_free(txq);
+ else {
+ txq->stats.idx = idx;
+ DEBUG("%p: adding TX queue %p to list",
+ (void *)dev, (void *)txq);
+ (*priv->txqs)[idx] = txq;
+ /* Update send callback. */
+ dev->tx_pkt_burst = mlx4_tx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a TX queue.
+ *
+ * @param dpdk_txq
+ * Generic TX queue pointer.
+ */
+static void
+mlx4_tx_queue_release(void *dpdk_txq)
+{
+ struct txq *txq = (struct txq *)dpdk_txq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (txq == NULL)
+ return;
+ priv = txq->priv;
+ priv_lock(priv);
+ for (i = 0; (i != priv->txqs_n); ++i)
+ if ((*priv->txqs)[i] == txq) {
+ DEBUG("%p: removing TX queue %p from list",
+ (void *)priv->dev, (void *)txq);
+ (*priv->txqs)[i] = NULL;
+ break;
+ }
+ txq_cleanup(txq);
+ rte_free(txq);
+ priv_unlock(priv);
+}
+
+/* RX queues handling. */
+
+/**
+ * Allocate RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts_sp(struct rxq *rxq, unsigned int elts_n,
+ struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt_sp (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge (*sges)[(elemof(elt->sges))] = &elt->sges;
+
+ /* These two arrays must have the same size. */
+ assert(elemof(elt->sges) == elemof(elt->bufs));
+ /* Configure WR. */
+ wr->wr_id = i;
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = &(*sges)[0];
+ wr->num_sge = elemof(*sges);
+ /* For each SGE (segment). */
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct ibv_sge *sge = &(*sges)[j];
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ }
+ else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ elt->bufs[j] = buf;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ if (j == 0) {
+ /* The first SGE keeps its headroom. */
+ sge->addr = (uintptr_t)rte_pktmbuf_mtod(buf,
+ char *);
+ sge->length = (buf->buf_len -
+ RTE_PKTMBUF_HEADROOM);
+ }
+ else {
+ /* Subsequent SGEs lose theirs. */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ SET_DATA_OFF(buf, 0);
+ sge->addr = (uintptr_t)buf->buf_addr;
+ sge->length = buf->buf_len;
+ }
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u WRs (%zu segments)",
+ (void *)rxq, elts_n, (elts_n * elemof((*elts)[0].sges)));
+ rxq->elts_n = elts_n;
+ rxq->elts.sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements with scattered packets support.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts_sp(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt_sp (*elts)[elts_n] = rxq->elts.sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ unsigned int j;
+ struct rxq_elt_sp *elt = &(*elts)[i];
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ struct rte_mbuf *buf = elt->bufs[j];
+
+ if (buf != NULL)
+ rte_pktmbuf_free_seg(buf);
+ }
+ }
+ rte_free(elts);
+}
+
+/**
+ * Allocate RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param elts_n
+ * Number of elements to allocate.
+ * @param[in] pool
+ * If not NULL, fetch buffers from this array instead of allocating them
+ * with rte_pktmbuf_alloc().
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_alloc_elts(struct rxq *rxq, unsigned int elts_n, struct rte_mbuf **pool)
+{
+ unsigned int i;
+ struct rxq_elt (*elts)[elts_n] =
+ rte_calloc_socket("RXQ elements", 1, sizeof(*elts), 0,
+ rxq->socket);
+ int ret = 0;
+
+ if (elts == NULL) {
+ ERROR("%p: can't allocate packets array", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* For each WR (packet). */
+ for (i = 0; (i != elts_n); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct ibv_sge *sge = &(*elts)[i].sge;
+ struct rte_mbuf *buf;
+
+ if (pool != NULL) {
+ buf = *(pool++);
+ assert(buf != NULL);
+ rte_pktmbuf_reset(buf);
+ }
+ else
+ buf = rte_pktmbuf_alloc(rxq->mp);
+ if (buf == NULL) {
+ assert(pool == NULL);
+ ERROR("%p: empty mbuf pool", (void *)rxq);
+ ret = ENOMEM;
+ goto error;
+ }
+ /* Configure WR. Work request ID contains its own index in
+ * the elts array and the offset between SGE buffer header and
+ * its data. */
+ WR_ID(wr->wr_id).id = i;
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)buf->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)buf);
+ wr->next = &(*elts)[(i + 1)].wr;
+ wr->sg_list = sge;
+ wr->num_sge = 1;
+ /* Headroom is reserved by rte_pktmbuf_alloc(). */
+ assert(DATA_OFF(buf) == RTE_PKTMBUF_HEADROOM);
+ /* Buffer is supposed to be empty. */
+ assert(rte_pktmbuf_data_len(buf) == 0);
+ assert(rte_pktmbuf_pkt_len(buf) == 0);
+ /* sge->addr must be able to store a pointer. */
+ assert(sizeof(sge->addr) >= sizeof(uintptr_t));
+ /* SGE keeps its headroom. */
+ sge->addr = (uintptr_t)
+ ((uint8_t *)buf->buf_addr + RTE_PKTMBUF_HEADROOM);
+ sge->length = (buf->buf_len - RTE_PKTMBUF_HEADROOM);
+ sge->lkey = rxq->mr->lkey;
+ /* Redundant check for tailroom. */
+ assert(sge->length == rte_pktmbuf_tailroom(buf));
+ /* Make sure elts index and SGE mbuf pointer can be deduced
+ * from WR ID. */
+ if ((WR_ID(wr->wr_id).id != i) ||
+ ((void *)(sge->addr - WR_ID(wr->wr_id).offset) != buf)) {
+ ERROR("%p: cannot store index and offset in WR ID",
+ (void *)rxq);
+ sge->addr = 0;
+ rte_pktmbuf_free(buf);
+ ret = EOVERFLOW;
+ goto error;
+ }
+ }
+ /* The last WR pointer must be NULL. */
+ (*elts)[(i - 1)].wr.next = NULL;
+ DEBUG("%p: allocated and configured %u single-segment WRs",
+ (void *)rxq, elts_n);
+ rxq->elts_n = elts_n;
+ rxq->elts.no_sp = elts;
+ assert(ret == 0);
+ return 0;
+error:
+ if (elts != NULL) {
+ assert(pool == NULL);
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+ }
+ DEBUG("%p: failed, freed everything", (void *)rxq);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * Free RX queue elements.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_free_elts(struct rxq *rxq)
+{
+ unsigned int i;
+ unsigned int elts_n = rxq->elts_n;
+ struct rxq_elt (*elts)[elts_n] = rxq->elts.no_sp;
+
+ DEBUG("%p: freeing WRs", (void *)rxq);
+ rxq->elts_n = 0;
+ rxq->elts.no_sp = NULL;
+ if (elts == NULL)
+ return;
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf;
+
+ if (elt->sge.addr == 0)
+ continue;
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ buf = (void *)(elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+ rte_pktmbuf_free_seg(buf);
+ }
+ rte_free(elts);
+}
+
+/**
+ * Unregister a MAC address from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+rxq_mac_addr_del(struct rxq *rxq, unsigned int mac_index)
+{
+#if defined(NDEBUG) || defined(MLX4_COMPAT_VMWARE)
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+#endif
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(rxq->mac_configured, mac_index)) {
+ assert(rxq->mac_flow[mac_index] == NULL);
+ return;
+ }
+ DEBUG("%p: removing MAC address %02x:%02x:%02x:%02x:%02x:%02x"
+ " index %u",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ claim_zero(ibv_detach_mcast(rxq->qp, &gid, 0));
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+ return;
+ }
+#endif
+ assert(rxq->mac_flow[mac_index] != NULL);
+ claim_zero(ibv_exp_destroy_flow(rxq->mac_flow[mac_index]));
+ rxq->mac_flow[mac_index] = NULL;
+ BITFIELD_RESET(rxq->mac_configured, mac_index);
+}
+
+/**
+ * Unregister all MAC addresses from a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_mac_addrs_del(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i)
+ rxq_mac_addr_del(rxq, i);
+}
+
+static int rxq_promiscuous_enable(struct rxq *);
+static void rxq_promiscuous_disable(struct rxq *);
+
+/**
+ * Register a MAC address in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param mac_index
+ * MAC address index to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addr_add(struct rxq *rxq, unsigned int mac_index)
+{
+ struct priv *priv = rxq->priv;
+ const uint8_t (*mac)[ETHER_ADDR_LEN] =
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ priv->mac[mac_index].addr_bytes;
+ unsigned int vlans = 0;
+ unsigned int specs = 0;
+ unsigned int i, j;
+ struct ibv_exp_flow *flow;
+
+ assert(mac_index < elemof(priv->mac));
+ if (BITFIELD_ISSET(rxq->mac_configured, mac_index))
+ rxq_mac_addr_del(rxq, mac_index);
+ /* Number of configured VLANs. */
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i)
+ if (priv->vlan_filter[i].enabled)
+ ++vlans;
+ specs = (vlans ? vlans : 1);
+
+ /* Allocate flow specification on the stack. */
+ struct ibv_exp_flow_attr data[1 +
+ (sizeof(struct ibv_exp_flow_spec_eth[specs]) /
+ sizeof(struct ibv_exp_flow_attr)) +
+ !!(sizeof(struct ibv_exp_flow_spec_eth[specs]) %
+ sizeof(struct ibv_exp_flow_attr))];
+
+ struct ibv_exp_flow_attr *attr = (void *)&data[0];
+ struct ibv_exp_flow_spec_eth *spec = (void *)&data[1];
+
+ /*
+ * No padding must be inserted by the compiler between attr and spec.
+ * This layout is expected by libibverbs.
+ */
+ assert(((uint8_t *)attr + sizeof(*attr)) == (uint8_t *)spec);
+ *attr = (struct ibv_exp_flow_attr){
+ .type = IBV_EXP_FLOW_ATTR_NORMAL,
+ .num_of_specs = specs,
+ .port = priv->port,
+ .flags = 0
+ };
+ *spec = (struct ibv_exp_flow_spec_eth){
+ .type = IBV_EXP_FLOW_SPEC_ETH,
+ .size = sizeof(*spec),
+ .val = {
+ .dst_mac = {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ },
+ .mask = {
+ .dst_mac = "\xff\xff\xff\xff\xff\xff",
+ .vlan_tag = (vlans ? htons(0xfff) : 0)
+ }
+ };
+ /* Fill VLAN specifications. */
+ for (i = 0, j = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled)
+ continue;
+ assert(j != vlans);
+ if (j)
+ spec[j] = spec[0];
+ spec[j].val.vlan_tag = htons(priv->vlan_filter[i].id);
+ ++j;
+ }
+ DEBUG("%p: adding MAC address %02x:%02x:%02x:%02x:%02x:%02x index %u"
+ " (%u VLAN(s) configured)",
+ (void *)rxq,
+ (*mac)[0], (*mac)[1], (*mac)[2], (*mac)[3], (*mac)[4], (*mac)[5],
+ mac_index,
+ vlans);
+#ifdef MLX4_COMPAT_VMWARE
+ if (priv->vmware) {
+ union ibv_gid gid = { .raw = { 0 } };
+
+ /* Call multicast attach with unicast mac to get traffic. */
+ memcpy(&gid.raw[10], *mac, sizeof(*mac));
+ errno = 0;
+ if (ibv_attach_mcast(rxq->qp, &gid, 0)) {
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+ }
+#endif
+ /* Create related flow. */
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, attr)) == NULL) {
+ int err = errno;
+ int disable = 0;
+
+ /* Flow creation failure is not fatal when in DMFS A0 mode.
+ * Ignore error if promiscuity is already enabled or can be
+ * enabled. */
+ if (priv->promisc_ok)
+ return 0;
+ if ((rxq->promisc_flow != NULL) ||
+ (disable = 1, rxq_promiscuous_enable(rxq) == 0)) {
+ if (disable)
+ rxq_promiscuous_disable(rxq);
+ WARN("cannot configure normal flow but promiscuous"
+ " mode is fine, assuming promiscuous optimization"
+ " is enabled"
+ " (options mlx4_core log_num_mgm_entry_size=-7)");
+ priv->promisc_ok = 1;
+ return 0;
+ }
+ errno = err;
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ assert(rxq->mac_flow[mac_index] == NULL);
+ rxq->mac_flow[mac_index] = flow;
+ BITFIELD_SET(rxq->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Register all MAC addresses in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_mac_addrs_add(struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ unsigned int i;
+ int ret;
+
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ ret = rxq_mac_addr_add(rxq, i);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ rxq_mac_addr_del(rxq, --i);
+ assert(ret > 0);
+ return ret;
+ }
+ return 0;
+}
+
+/**
+ * Unregister a MAC address.
+ *
+ * In RSS mode, the MAC address is unregistered from the parent queue,
+ * otherwise it is unregistered from each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index.
+ */
+static void
+priv_mac_addr_del(struct priv *priv, unsigned int mac_index)
+{
+ unsigned int i;
+
+ assert(mac_index < elemof(priv->mac));
+ if (!BITFIELD_ISSET(priv->mac_configured, mac_index))
+ return;
+ if (priv->rss) {
+ rxq_mac_addr_del(&priv->rxq_parent, mac_index);
+ goto end;
+ }
+ for (i = 0; (i != priv->dev->data->nb_rx_queues); ++i)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+end:
+ BITFIELD_RESET(priv->mac_configured, mac_index);
+}
+
+/**
+ * Register a MAC address.
+ *
+ * In RSS mode, the MAC address is registered in the parent queue,
+ * otherwise it is registered in each queue directly.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param mac_index
+ * MAC address index to use.
+ * @param mac
+ * MAC address to register.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+priv_mac_addr_add(struct priv *priv, unsigned int mac_index,
+ const uint8_t (*mac)[ETHER_ADDR_LEN])
+{
+ unsigned int i;
+ int ret;
+
+ assert(mac_index < elemof(priv->mac));
+ /* First, make sure this address isn't already configured. */
+ for (i = 0; (i != elemof(priv->mac)); ++i) {
+ /* Skip this index, it's going to be reconfigured. */
+ if (i == mac_index)
+ continue;
+ if (!BITFIELD_ISSET(priv->mac_configured, i))
+ continue;
+ if (memcmp(priv->mac[i].addr_bytes, *mac, sizeof(*mac)))
+ continue;
+ /* Address already configured elsewhere, return with error. */
+ return EADDRINUSE;
+ }
+ if (BITFIELD_ISSET(priv->mac_configured, mac_index))
+ priv_mac_addr_del(priv, mac_index);
+ priv->mac[mac_index] = (struct ether_addr){
+ {
+ (*mac)[0], (*mac)[1], (*mac)[2],
+ (*mac)[3], (*mac)[4], (*mac)[5]
+ }
+ };
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started) {
+#ifndef NDEBUG
+ /* Verify that all queues have this index disabled. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ assert(!BITFIELD_ISSET
+ ((*priv->rxqs)[i]->mac_configured, mac_index));
+ }
+#endif
+ goto end;
+ }
+ if (priv->rss) {
+ ret = rxq_mac_addr_add(&priv->rxq_parent, mac_index);
+ if (ret)
+ return ret;
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_mac_addr_add((*priv->rxqs)[i], mac_index);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[(--i)] != NULL)
+ rxq_mac_addr_del((*priv->rxqs)[i], mac_index);
+ return ret;
+ }
+end:
+ BITFIELD_SET(priv->mac_configured, mac_index);
+ return 0;
+}
+
+/**
+ * Enable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_allmulticast_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_MC_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ DEBUG("%p: enabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, &attr)) == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->allmulti_flow = flow;
+ DEBUG("%p: allmulticast mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable allmulti mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_allmulticast_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: allmulticast mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ DEBUG("%p: disabling allmulticast mode", (void *)rxq);
+ if (rxq->allmulti_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->allmulti_flow));
+ rxq->allmulti_flow = NULL;
+ DEBUG("%p: allmulticast mode disabled", (void *)rxq);
+}
+
+/**
+ * Enable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_promiscuous_enable(struct rxq *rxq)
+{
+ struct ibv_exp_flow *flow;
+ struct ibv_exp_flow_attr attr = {
+ .type = IBV_EXP_FLOW_ATTR_ALL_DEFAULT,
+ .num_of_specs = 0,
+ .port = rxq->priv->port,
+ .flags = 0
+ };
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return EINVAL;
+ }
+#endif
+ if (rxq->priv->vf)
+ return 0;
+ DEBUG("%p: enabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow != NULL)
+ return EBUSY;
+ errno = 0;
+ if ((flow = ibv_exp_create_flow(rxq->qp, &attr)) == NULL) {
+ /* It's not clear whether errno is always set in this case. */
+ ERROR("%p: flow configuration failed, errno=%d: %s",
+ (void *)rxq, errno,
+ (errno ? strerror(errno) : "Unknown error"));
+ if (errno)
+ return errno;
+ return EINVAL;
+ }
+ rxq->promisc_flow = flow;
+ DEBUG("%p: promiscuous mode enabled", (void *)rxq);
+ return 0;
+}
+
+/**
+ * Disable promiscuous mode in a RX queue.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_promiscuous_disable(struct rxq *rxq)
+{
+#ifdef MLX4_COMPAT_VMWARE
+ if (rxq->priv->vmware) {
+ ERROR("%p: promiscuous mode is not supported in VMware",
+ (void *)rxq);
+ return;
+ }
+#endif
+ if (rxq->priv->vf)
+ return;
+ DEBUG("%p: disabling promiscuous mode", (void *)rxq);
+ if (rxq->promisc_flow == NULL)
+ return;
+ claim_zero(ibv_exp_destroy_flow(rxq->promisc_flow));
+ rxq->promisc_flow = NULL;
+ DEBUG("%p: promiscuous mode disabled", (void *)rxq);
+}
+
+/**
+ * Clean up a RX queue.
+ *
+ * Destroy objects, free allocated memory and reset the structure for reuse.
+ *
+ * @param rxq
+ * Pointer to RX queue structure.
+ */
+static void
+rxq_cleanup(struct rxq *rxq)
+{
+ DEBUG("cleaning up %p", (void *)rxq);
+ if (rxq->sp)
+ rxq_free_elts_sp(rxq);
+ else
+ rxq_free_elts(rxq);
+ if (rxq->qp != NULL) {
+ rxq_promiscuous_disable(rxq);
+ rxq_allmulticast_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ claim_zero(ibv_destroy_qp(rxq->qp));
+ }
+ if (rxq->cq != NULL)
+ claim_zero(ibv_destroy_cq(rxq->cq));
+ if (rxq->mr != NULL)
+ claim_zero(ibv_dereg_mr(rxq->mr));
+ memset(rxq, 0, sizeof(*rxq));
+}
+
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n);
+
+/**
+ * DPDK callback for RX with scattered packets support.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst_sp(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(!rxq->sp))
+ return mlx4_rx_burst(dpdk_rxq, pkts, pkts_n);
+ if (unlikely(elts == NULL)) /* See RTE_DEV_CMD_SET_MTU. */
+ return 0;
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt_sp *elt = &(*elts)[wr_id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *pkt_buf = NULL; /* Buffer returned in pkts. */
+ struct rte_mbuf **pkt_buf_next = &pkt_buf;
+ unsigned int seg_headroom = RTE_PKTMBUF_HEADROOM;
+ unsigned int j = 0;
+
+ /* Sanity checks. */
+ assert(wr_id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == elt->sges);
+ assert(wr->num_sge == elemof(elt->sges));
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, wc->wr_id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Replace spent segments with new ones, concatenate and
+ * return them as pkt_buf.
+ */
+ while (1) {
+ struct ibv_sge *sge = &elt->sges[j];
+ struct rte_mbuf *seg = elt->bufs[j];
+ struct rte_mbuf *rep;
+ unsigned int seg_tailroom;
+
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu64 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, wr_id);
+ if (pkt_buf != NULL)
+ rte_pktmbuf_free(pkt_buf);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+#ifndef NDEBUG
+ /* Poison user-modifiable fields in rep. */
+ NEXT(rep) = (void *)((uintptr_t)-1);
+ SET_DATA_OFF(rep, 0xdead);
+ DATA_LEN(rep) = 0xd00d;
+ PKT_LEN(rep) = 0xdeadd00d;
+ NB_SEGS(rep) = 0x2a;
+ PORT(rep) = 0x2a;
+ rep->ol_flags = -1;
+#endif
+ assert(rep->buf_len == seg->buf_len);
+ assert(rep->buf_len == rxq->mb_len);
+ /* Reconfigure sge to use rep instead of seg. */
+ assert(sge->lkey == rxq->mr->lkey);
+ sge->addr = ((uintptr_t)rep->buf_addr + seg_headroom);
+ elt->bufs[j] = rep;
+ ++j;
+ /* Update pkt_buf if it's the first segment, or link
+ * seg to the previous one and update pkt_buf_next. */
+ *pkt_buf_next = seg;
+ pkt_buf_next = &NEXT(seg);
+ /* Update seg information. */
+ seg_tailroom = (seg->buf_len - seg_headroom);
+ assert(sge->length == seg_tailroom);
+ SET_DATA_OFF(seg, seg_headroom);
+ if (likely(len <= seg_tailroom)) {
+ /* Last segment. */
+ DATA_LEN(seg) = len;
+ PKT_LEN(seg) = len;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) ==
+ seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) ==
+ (seg_tailroom - len));
+ break;
+ }
+ DATA_LEN(seg) = seg_tailroom;
+ PKT_LEN(seg) = seg_tailroom;
+ /* Sanity check. */
+ assert(rte_pktmbuf_headroom(seg) == seg_headroom);
+ assert(rte_pktmbuf_tailroom(seg) == 0);
+ /* Fix len and clear headroom for next segments. */
+ len -= seg_tailroom;
+ seg_headroom = 0;
+ }
+ /* Update head and tail segments. */
+ *pkt_buf_next = NULL;
+ assert(pkt_buf != NULL);
+ assert(j != 0);
+ NB_SEGS(pkt_buf) = j;
+ PORT(pkt_buf) = rxq->port_id;
+ PKT_LEN(pkt_buf) = wc->byte_len;
+ pkt_buf->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = pkt_buf;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+ repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu64 " (%p)",
+ (void *)rxq, wcs_n, wcs[0].wr_id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+/**
+ * DPDK callback for RX.
+ *
+ * The following function is the same as mlx4_rx_burst_sp(), except it doesn't
+ * manage scattered packets. Improves performance when MRU is lower than the
+ * size of the first segment.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+mlx4_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+ struct ibv_wc wcs[pkts_n];
+ struct ibv_recv_wr head;
+ struct ibv_recv_wr **next = &head.next;
+ struct ibv_recv_wr *bad_wr;
+ int ret = 0;
+ int wcs_n;
+ int i;
+
+ if (unlikely(rxq->sp))
+ return mlx4_rx_burst_sp(dpdk_rxq, pkts, pkts_n);
+ wcs_n = ibv_poll_cq(rxq->cq, pkts_n, wcs);
+ if (unlikely(wcs_n == 0))
+ return 0;
+ if (unlikely(wcs_n < 0)) {
+ DEBUG("rxq=%p, ibv_poll_cq() failed (wc_n=%d)",
+ (void *)rxq, wcs_n);
+ return 0;
+ }
+ assert(wcs_n <= (int)pkts_n);
+ /* For each work completion. */
+ for (i = 0; (i != wcs_n); ++i) {
+ struct ibv_wc *wc = &wcs[i];
+ uint64_t wr_id = wc->wr_id;
+ uint32_t len = wc->byte_len;
+ struct rxq_elt *elt = &(*elts)[WR_ID(wr_id).id];
+ struct ibv_recv_wr *wr = &elt->wr;
+ struct rte_mbuf *seg =
+ (void *)(elt->sge.addr - WR_ID(wr_id).offset);
+ struct rte_mbuf *rep;
+
+ /* Sanity checks. */
+ assert(WR_ID(wr_id).id < rxq->elts_n);
+ assert(wr_id == wr->wr_id);
+ assert(wr->sg_list == &elt->sge);
+ assert(wr->num_sge == 1);
+ /* Link completed WRs together for repost. */
+ *next = wr;
+ next = &wr->next;
+ if (unlikely(wc->status != IBV_WC_SUCCESS)) {
+ /* Whatever, just repost the offending WR. */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ": bad work completion"
+ " status (%d): %s",
+ (void *)rxq, WR_ID(wr_id).id, wc->status,
+ ibv_wc_status_str(wc->status));
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase dropped packets counter. */
+ ++rxq->stats.idropped;
+#endif
+ goto repost;
+ }
+ /*
+ * Fetch initial bytes of packet descriptor into a
+ * cacheline while allocating rep.
+ */
+ rte_prefetch0(seg);
+ rep = __rte_mbuf_raw_alloc(rxq->mp);
+ if (unlikely(rep == NULL)) {
+ /*
+ * Unable to allocate a replacement mbuf,
+ * repost WR.
+ */
+ DEBUG("rxq=%p, wr_id=%" PRIu32 ":"
+ " can't allocate a new mbuf",
+ (void *)rxq, WR_ID(wr_id).id);
+ /* Increase out of memory counters. */
+ ++rxq->stats.rx_nombuf;
+ ++rxq->priv->dev->data->rx_mbuf_alloc_failed;
+ goto repost;
+ }
+
+ /* Reconfigure sge to use rep instead of seg. */
+ elt->sge.addr = (uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM;
+ assert(elt->sge.lkey == rxq->mr->lkey);
+ WR_ID(wr->wr_id).offset =
+ (((uintptr_t)rep->buf_addr + RTE_PKTMBUF_HEADROOM) -
+ (uintptr_t)rep);
+ assert(WR_ID(wr->wr_id).id == WR_ID(wr_id).id);
+
+ /* Update seg information. */
+ SET_DATA_OFF(seg, RTE_PKTMBUF_HEADROOM);
+ NB_SEGS(seg) = 1;
+ PORT(seg) = rxq->port_id;
+ NEXT(seg) = NULL;
+ PKT_LEN(seg) = len;
+ DATA_LEN(seg) = len;
+ seg->ol_flags = 0;
+
+ /* Return packet. */
+ *(pkts++) = seg;
+ ++ret;
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase bytes counter. */
+ rxq->stats.ibytes += wc->byte_len;
+#endif
+ repost:
+ continue;
+ }
+ *next = NULL;
+ /* Repost WRs. */
+#ifdef DEBUG_RECV
+ DEBUG("%p: reposting %d WRs starting from %" PRIu32 " (%p)",
+ (void *)rxq, wcs_n, WR_ID(wcs[0].wr_id).id, (void *)head.next);
+#endif
+ i = ibv_post_recv(rxq->qp, head.next, &bad_wr);
+ if (unlikely(i)) {
+ /* Inability to repost WRs is fatal. */
+ DEBUG("%p: ibv_post_recv(): failed for WR %p: %s",
+ (void *)rxq->priv,
+ (void *)bad_wr,
+ strerror(i));
+ abort();
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ /* Increase packets counter. */
+ rxq->stats.ipackets += ret;
+#endif
+ return ret;
+}
+
+#ifdef INLINE_RECV
+
+/**
+ * Allocate a Queue Pair in case inline receive is supported.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .max_inl_recv = priv->inl_recv_size,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .pd = priv->pd
+ };
+
+ attr.comp_mask = IBV_EXP_QP_INIT_ATTR_PD;
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#else /* INLINE_RECV */
+
+/**
+ * Allocate a Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp(struct priv *priv, struct ibv_cq *cq, uint16_t desc)
+{
+ struct ibv_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET
+ };
+
+ return ibv_create_qp(priv->pd, &attr);
+}
+
+#endif /* INLINE_RECV */
+
+#ifdef RSS_SUPPORT
+
+/**
+ * Allocate a RSS Queue Pair.
+ *
+ * @param priv
+ * Pointer to private structure.
+ * @param cq
+ * Completion queue to associate with QP.
+ * @param desc
+ * Number of descriptors in QP (hint only).
+ * @param parent
+ * If nonzero, create a parent QP, otherwise a child.
+ *
+ * @return
+ * QP pointer or NULL in case of error.
+ */
+static struct ibv_qp *
+rxq_setup_qp_rss(struct priv *priv, struct ibv_cq *cq, uint16_t desc,
+ int parent)
+{
+ struct ibv_exp_qp_init_attr attr = {
+ /* CQ to be associated with the send queue. */
+ .send_cq = cq,
+ /* CQ to be associated with the receive queue. */
+ .recv_cq = cq,
+#ifdef INLINE_RECV
+ .max_inl_recv = priv->inl_recv_size,
+#endif
+ .cap = {
+ /* Max number of outstanding WRs. */
+ .max_recv_wr = ((priv->device_attr.max_qp_wr < desc) ?
+ priv->device_attr.max_qp_wr :
+ desc),
+ /* Max number of scatter/gather elements in a WR. */
+ .max_recv_sge = ((priv->device_attr.max_sge <
+ MLX4_PMD_SGE_WR_N) ?
+ priv->device_attr.max_sge :
+ MLX4_PMD_SGE_WR_N),
+ },
+ .qp_type = IBV_QPT_RAW_PACKET,
+ .comp_mask = (IBV_EXP_QP_INIT_ATTR_PD |
+ IBV_EXP_QP_INIT_ATTR_QPG),
+ .pd = priv->pd
+ };
+
+#ifdef INLINE_RECV
+ attr.comp_mask |= IBV_EXP_QP_INIT_ATTR_INL_RECV;
+#endif
+ if (parent) {
+ attr.qpg.qpg_type = IBV_EXP_QPG_PARENT;
+ /* TSS isn't necessary. */
+ attr.qpg.parent_attrib.tss_child_count = 0;
+ attr.qpg.parent_attrib.rss_child_count = priv->rxqs_n;
+ DEBUG("initializing parent RSS queue");
+ }
+ else {
+ attr.qpg.qpg_type = IBV_EXP_QPG_CHILD_RX;
+ attr.qpg.qpg_parent = priv->rxq_parent.qp;
+ DEBUG("initializing child RSS queue");
+ }
+ return ibv_exp_create_qp(priv->ctx, &attr);
+}
+
+#endif /* RSS_SUPPORT */
+
+/**
+ * Reconfigure a RX queue with new parameters.
+ *
+ * rxq_rehash() does not allocate mbufs, which, if not done from the right
+ * thread (such as a control thread), may corrupt the pool.
+ * In case of failure, the queue is left untouched.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * RX queue pointer.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_rehash(struct rte_eth_dev *dev, struct rxq *rxq)
+{
+ struct priv *priv = rxq->priv;
+ struct rxq tmpl = *rxq;
+ unsigned int mbuf_n;
+ unsigned int desc_n;
+ struct rte_mbuf **pool;
+ unsigned int i, k;
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ int err;
+ int parent = (rxq == &priv->rxq_parent);
+
+ if (parent) {
+ ERROR("%p: cannot rehash parent queue %p",
+ (void *)dev, (void *)rxq);
+ return EINVAL;
+ }
+ DEBUG("%p: rehashing queue %p", (void *)dev, (void *)rxq);
+ /* Number of descriptors and mbufs currently allocated. */
+ desc_n = (tmpl.elts_n * (tmpl.sp ? MLX4_PMD_SGE_WR_N : 1));
+ mbuf_n = desc_n;
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc_n /= MLX4_PMD_SGE_WR_N;
+ }
+ else
+ tmpl.sp = 0;
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc_n);
+ /* If scatter mode is the same as before, nothing to do. */
+ if (tmpl.sp == rxq->sp) {
+ DEBUG("%p: nothing to do", (void *)dev);
+ return 0;
+ }
+ /* Remove attached flows if RSS is disabled (no parent queue). */
+ if (!priv->rss) {
+ rxq_allmulticast_disable(&tmpl);
+ rxq_promiscuous_disable(&tmpl);
+ rxq_mac_addrs_del(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* From now on, any failure will render the queue unusable.
+ * Reinitialize QP. */
+ mod = (struct ibv_exp_qp_attr){ .qp_state = IBV_QPS_RESET };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: cannot reset QP: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ if ((err = ibv_resize_cq(tmpl.cq, desc_n))) {
+ ERROR("%p: cannot resize CQ: %s", (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(err));
+ assert(err > 0);
+ return err;
+ };
+ /* Reconfigure flows. Do not care for errors. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(&tmpl);
+ if (priv->promisc)
+ rxq_promiscuous_enable(&tmpl);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(&tmpl);
+ /* Update original queue in case of failure. */
+ rxq->allmulti_flow = tmpl.allmulti_flow;
+ rxq->promisc_flow = tmpl.promisc_flow;
+ memcpy(rxq->mac_configured, tmpl.mac_configured,
+ sizeof(rxq->mac_configured));
+ memcpy(rxq->mac_flow, tmpl.mac_flow, sizeof(rxq->mac_flow));
+ }
+ /* Allocate pool. */
+ pool = rte_malloc(__func__, (mbuf_n * sizeof(*pool)), 0);
+ if (pool == NULL) {
+ ERROR("%p: cannot allocate memory", (void *)dev);
+ return ENOBUFS;
+ }
+ /* Snatch mbufs from original queue. */
+ k = 0;
+ if (rxq->sp) {
+ struct rxq_elt_sp (*elts)[rxq->elts_n] = rxq->elts.sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt_sp *elt = &(*elts)[i];
+ unsigned int j;
+
+ for (j = 0; (j != elemof(elt->bufs)); ++j) {
+ assert(elt->bufs[j] != NULL);
+ pool[k++] = elt->bufs[j];
+ }
+ }
+ }
+ else {
+ struct rxq_elt (*elts)[rxq->elts_n] = rxq->elts.no_sp;
+
+ for (i = 0; (i != elemof(*elts)); ++i) {
+ struct rxq_elt *elt = &(*elts)[i];
+ struct rte_mbuf *buf = (void *)
+ (elt->sge.addr - WR_ID(elt->wr.wr_id).offset);
+
+ assert(WR_ID(elt->wr.wr_id).id == i);
+ pool[k++] = buf;
+ }
+ }
+ assert(k == mbuf_n);
+ tmpl.elts_n = 0;
+ tmpl.elts.sp = NULL;
+ assert((void *)&tmpl.elts.sp == (void *)&tmpl.elts.no_sp);
+ err = ((tmpl.sp) ?
+ rxq_alloc_elts_sp(&tmpl, desc_n, pool) :
+ rxq_alloc_elts(&tmpl, desc_n, pool));
+ if (err) {
+ ERROR("%p: cannot reallocate WRs, aborting", (void *)dev);
+ rte_free(pool);
+ assert(err > 0);
+ return err;
+ }
+ assert(tmpl.elts_n == desc_n);
+ assert(tmpl.elts.sp != NULL);
+ rte_free(pool);
+ /* Clean up original data. */
+ rxq->elts_n = 0;
+ rte_free(rxq->elts.sp);
+ rxq->elts.sp = NULL;
+ /* Post WRs. */
+ if ((err = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr))) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(err));
+ goto skip_rtr;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((err = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE)))
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(err));
+skip_rtr:
+ *rxq = tmpl;
+ assert(err >= 0);
+ return err;
+}
+
+/**
+ * Configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param rxq
+ * Pointer to RX queue structure.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+rxq_setup(struct rte_eth_dev *dev, struct rxq *rxq, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq tmpl = {
+ .priv = priv,
+ .mp = mp,
+ .socket = socket
+ };
+ struct ibv_exp_qp_attr mod;
+ struct ibv_recv_wr *bad_wr;
+ struct rte_mbuf *buf;
+ int ret = 0;
+ int parent = (rxq == &priv->rxq_parent);
+
+ (void)conf; /* Thresholds configuration (ignored). */
+ /*
+ * If this is a parent queue, hardware must support RSS and
+ * RSS must be enabled.
+ */
+ assert((!parent) || ((priv->hw_rss) && (priv->rss)));
+ if (parent) {
+ /* Even if unused, ibv_create_cq() requires at least one
+ * descriptor. */
+ desc = 1;
+ goto skip_mr;
+ }
+ if ((desc == 0) || (desc % MLX4_PMD_SGE_WR_N)) {
+ ERROR("%p: invalid number of RX descriptors (must be a"
+ " multiple of %d)", (void *)dev, desc);
+ return EINVAL;
+ }
+ /* Get mbuf length. */
+ buf = rte_pktmbuf_alloc(mp);
+ if (buf == NULL) {
+ ERROR("%p: unable to allocate mbuf", (void *)dev);
+ return ENOMEM;
+ }
+ tmpl.mb_len = buf->buf_len;
+ assert((rte_pktmbuf_headroom(buf) +
+ rte_pktmbuf_tailroom(buf)) == tmpl.mb_len);
+ assert(rte_pktmbuf_headroom(buf) == RTE_PKTMBUF_HEADROOM);
+ rte_pktmbuf_free(buf);
+ /* Enable scattered packets support for this queue if necessary. */
+ if ((dev->data->dev_conf.rxmode.jumbo_frame) &&
+ (dev->data->dev_conf.rxmode.max_rx_pkt_len >
+ (tmpl.mb_len - RTE_PKTMBUF_HEADROOM))) {
+ tmpl.sp = 1;
+ desc /= MLX4_PMD_SGE_WR_N;
+ }
+ DEBUG("%p: %s scattered packets support (%u WRs)",
+ (void *)dev, (tmpl.sp ? "enabling" : "disabling"), desc);
+ /* Use the entire RX mempool as the memory region. */
+ tmpl.mr = ibv_reg_mr(priv->pd,
+ (void *)mp->elt_va_start,
+ (mp->elt_va_end - mp->elt_va_start),
+ (IBV_ACCESS_LOCAL_WRITE |
+ IBV_ACCESS_REMOTE_WRITE));
+ if (tmpl.mr == NULL) {
+ ret = EINVAL;
+ ERROR("%p: MR creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+skip_mr:
+ tmpl.cq = ibv_create_cq(priv->ctx, desc, NULL, NULL, 0);
+ if (tmpl.cq == NULL) {
+ ret = ENOMEM;
+ ERROR("%p: CQ creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ DEBUG("priv->device_attr.max_qp_wr is %d",
+ priv->device_attr.max_qp_wr);
+ DEBUG("priv->device_attr.max_sge is %d",
+ priv->device_attr.max_sge);
+#ifdef RSS_SUPPORT
+ if (priv->rss)
+ tmpl.qp = rxq_setup_qp_rss(priv, tmpl.cq, desc, parent);
+ else
+#endif /* RSS_SUPPORT */
+ tmpl.qp = rxq_setup_qp(priv, tmpl.cq, desc);
+ if (tmpl.qp == NULL) {
+ ret = (errno ? errno : EINVAL);
+ ERROR("%p: QP creation failure: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ mod = (struct ibv_exp_qp_attr){
+ /* Move the QP to this state. */
+ .qp_state = IBV_QPS_INIT,
+ /* Primary port number. */
+ .port_num = priv->port
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &mod,
+ (IBV_EXP_QP_STATE |
+#ifdef RSS_SUPPORT
+ (parent ? IBV_EXP_QP_GROUP_RSS : 0) |
+#endif /* RSS_SUPPORT */
+ IBV_EXP_QP_PORT)))) {
+ ERROR("%p: QP state to IBV_QPS_INIT failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((parent) || (!priv->rss)) {
+ /* Configure MAC and broadcast addresses. */
+ if ((ret = rxq_mac_addrs_add(&tmpl))) {
+ ERROR("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ }
+ /* Allocate descriptors for RX queues, except for the RSS parent. */
+ if (parent)
+ goto skip_alloc;
+ if (tmpl.sp)
+ ret = rxq_alloc_elts_sp(&tmpl, desc, NULL);
+ else
+ ret = rxq_alloc_elts(&tmpl, desc, NULL);
+ if (ret) {
+ ERROR("%p: RXQ allocation failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ if ((ret = ibv_post_recv(tmpl.qp,
+ (tmpl.sp ?
+ &(*tmpl.elts.sp)[0].wr :
+ &(*tmpl.elts.no_sp)[0].wr),
+ &bad_wr))) {
+ ERROR("%p: ibv_post_recv() failed for WR %p: %s",
+ (void *)dev,
+ (void *)bad_wr,
+ strerror(ret));
+ goto error;
+ }
+skip_alloc:
+ mod = (struct ibv_exp_qp_attr){
+ .qp_state = IBV_QPS_RTR
+ };
+ if ((ret = ibv_exp_modify_qp(tmpl.qp, &mod, IBV_EXP_QP_STATE))) {
+ ERROR("%p: QP state to IBV_QPS_RTR failed: %s",
+ (void *)dev, strerror(ret));
+ goto error;
+ }
+ /* Save port ID. */
+ tmpl.port_id = dev->data->port_id;
+ DEBUG("%p: RTE port ID: %u", (void *)rxq, tmpl.port_id);
+ /* Clean up rxq in case we're reinitializing it. */
+ DEBUG("%p: cleaning-up old rxq just in case", (void *)rxq);
+ rxq_cleanup(rxq);
+ *rxq = tmpl;
+ DEBUG("%p: rxq updated with %p", (void *)rxq, (void *)&tmpl);
+ assert(ret == 0);
+ return 0;
+error:
+ rxq_cleanup(&tmpl);
+ assert(ret > 0);
+ return ret;
+}
+
+/**
+ * DPDK callback to configure a RX queue.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param idx
+ * RX queue index.
+ * @param desc
+ * Number of descriptors to configure in queue.
+ * @param socket
+ * NUMA socket on which memory must be allocated.
+ * @param[in] conf
+ * Thresholds parameters.
+ * @param mp
+ * Memory pool for buffer allocations.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_rx_queue_setup(struct rte_eth_dev *dev, uint16_t idx, uint16_t desc,
+ unsigned int socket, const struct rte_eth_rxconf *conf,
+ struct rte_mempool *mp)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rxq *rxq = (*priv->rxqs)[idx];
+ int ret;
+
+ priv_lock(priv);
+ DEBUG("%p: configuring queue %u for %u descriptors",
+ (void *)dev, idx, desc);
+ if (idx >= priv->rxqs_n) {
+ ERROR("%p: queue index out of range (%u >= %u)",
+ (void *)dev, idx, priv->rxqs_n);
+ priv_unlock(priv);
+ return -EOVERFLOW;
+ }
+ if (rxq != NULL) {
+ DEBUG("%p: reusing already allocated queue index %u (%p)",
+ (void *)dev, idx, (void *)rxq);
+ if (priv->started) {
+ priv_unlock(priv);
+ return -EEXIST;
+ }
+ (*priv->rxqs)[idx] = NULL;
+ rxq_cleanup(rxq);
+ }
+ else {
+ rxq = rte_calloc_socket("RXQ", 1, sizeof(*rxq), 0, socket);
+ if (rxq == NULL) {
+ ERROR("%p: unable to allocate queue index %u",
+ (void *)dev, idx);
+ priv_unlock(priv);
+ return -ENOMEM;
+ }
+ }
+ ret = rxq_setup(dev, rxq, desc, socket, conf, mp);
+ if (ret)
+ rte_free(rxq);
+ else {
+ rxq->stats.idx = idx;
+ DEBUG("%p: adding RX queue %p to list",
+ (void *)dev, (void *)rxq);
+ (*priv->rxqs)[idx] = rxq;
+ /* Update receive callback. */
+ if (rxq->sp)
+ dev->rx_pkt_burst = mlx4_rx_burst_sp;
+ else
+ dev->rx_pkt_burst = mlx4_rx_burst;
+ }
+ priv_unlock(priv);
+ return -ret;
+}
+
+/**
+ * DPDK callback to release a RX queue.
+ *
+ * @param dpdk_rxq
+ * Generic RX queue pointer.
+ */
+static void
+mlx4_rx_queue_release(void *dpdk_rxq)
+{
+ struct rxq *rxq = (struct rxq *)dpdk_rxq;
+ struct priv *priv;
+ unsigned int i;
+
+ if (rxq == NULL)
+ return;
+ priv = rxq->priv;
+ priv_lock(priv);
+ assert(rxq != &priv->rxq_parent);
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] == rxq) {
+ DEBUG("%p: removing RX queue %p from list",
+ (void *)priv->dev, (void *)rxq);
+ (*priv->rxqs)[i] = NULL;
+ break;
+ }
+ rxq_cleanup(rxq);
+ rte_free(rxq);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to start the device.
+ *
+ * Simulate device start by attaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_start(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (priv->started) {
+ priv_unlock(priv);
+ return 0;
+ }
+ DEBUG("%p: attaching configured flows to all RX queues", (void *)dev);
+ priv->started = 1;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ }
+ else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ int ret;
+
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ if (((ret = rxq_mac_addrs_add(rxq)) == 0) &&
+ ((!priv->promisc) ||
+ ((ret = rxq_promiscuous_enable(rxq)) == 0)) &&
+ ((!priv->allmulti) ||
+ ((ret = rxq_allmulticast_enable(rxq)) == 0)))
+ continue;
+ WARN("%p: QP flow attachment failed: %s",
+ (void *)dev, strerror(ret));
+ /* Rollback. */
+ while (i != 0)
+ if ((rxq = (*priv->rxqs)[--i]) != NULL) {
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ priv->started = 0;
+ return -ret;
+ }
+ while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+ return 0;
+}
+
+/**
+ * DPDK callback to stop the device.
+ *
+ * Simulate device stop by detaching all configured flows.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_stop(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i = 0;
+ unsigned int r;
+ struct rxq *rxq;
+
+ priv_lock(priv);
+ if (!priv->started) {
+ priv_unlock(priv);
+ return;
+ }
+ DEBUG("%p: detaching flows from all RX queues", (void *)dev);
+ priv->started = 0;
+ if (priv->rss) {
+ rxq = &priv->rxq_parent;
+ r = 1;
+ }
+ else {
+ rxq = (*priv->rxqs)[0];
+ r = priv->rxqs_n;
+ }
+ /* Iterate only once when RSS is enabled. */
+ do {
+ /* Ignore nonexistent RX queues. */
+ if (rxq == NULL)
+ continue;
+ rxq_allmulticast_disable(rxq);
+ rxq_promiscuous_disable(rxq);
+ rxq_mac_addrs_del(rxq);
+ }
+ while ((--r) && ((rxq = (*priv->rxqs)[++i]), i));
+ priv_unlock(priv);
+}
+
+/**
+ * Dummy DPDK callback for TX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_txq
+ * Generic pointer to TX queue structure.
+ * @param[in] pkts
+ * Packets to transmit.
+ * @param pkts_n
+ * Number of packets in array.
+ *
+ * @return
+ * Number of packets successfully transmitted (<= pkts_n).
+ */
+static uint16_t
+removed_tx_burst(void *dpdk_txq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_txq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * Dummy DPDK callback for RX.
+ *
+ * This function is used to temporarily replace the real callback during
+ * unsafe control operations on the queue, or in case of error.
+ *
+ * @param dpdk_rxq
+ * Generic pointer to RX queue structure.
+ * @param[out] pkts
+ * Array to store received packets.
+ * @param pkts_n
+ * Maximum number of packets in array.
+ *
+ * @return
+ * Number of packets successfully received (<= pkts_n).
+ */
+static uint16_t
+removed_rx_burst(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
+{
+ (void)dpdk_rxq;
+ (void)pkts;
+ (void)pkts_n;
+ return 0;
+}
+
+/**
+ * DPDK callback to close the device.
+ *
+ * Destroy all queues and objects, free memory.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_dev_close(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ void *tmp;
+ unsigned int i;
+
+ priv_lock(priv);
+ DEBUG("%p: closing device \"%s\"",
+ (void *)dev,
+ ((priv->ctx != NULL) ? priv->ctx->device->name : ""));
+ /* Prevent crashes when queues are still in use. This is unfortunately
+ * still required for DPDK 1.3 because some programs (such as testpmd)
+ * never release them before closing the device. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ dev->tx_pkt_burst = removed_tx_burst;
+ if (priv->rxqs != NULL) {
+ /* XXX race condition if mlx4_rx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ tmp = (*priv->rxqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->rxqs)[i] = NULL;
+ rxq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->rxqs_n = 0;
+ priv->rxqs = NULL;
+ }
+ if (priv->txqs != NULL) {
+ /* XXX race condition if mlx4_tx_burst() is still running. */
+ usleep(1000);
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ tmp = (*priv->txqs)[i];
+ if (tmp == NULL)
+ continue;
+ (*priv->txqs)[i] = NULL;
+ txq_cleanup(tmp);
+ rte_free(tmp);
+ }
+ priv->txqs_n = 0;
+ priv->txqs = NULL;
+ }
+ if (priv->rss)
+ rxq_cleanup(&priv->rxq_parent);
+ if (priv->pd != NULL) {
+ assert(priv->ctx != NULL);
+ claim_zero(ibv_dealloc_pd(priv->pd));
+ claim_zero(ibv_close_device(priv->ctx));
+ }
+ else
+ assert(priv->ctx == NULL);
+ priv_unlock(priv);
+ memset(priv, 0, sizeof(*priv));
+}
+
+/**
+ * DPDK callback to get information about the device.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] info
+ * Info structure output buffer.
+ */
+static void
+mlx4_dev_infos_get(struct rte_eth_dev *dev, struct rte_eth_dev_info *info)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int max;
+
+ priv_lock(priv);
+ /* FIXME: we should ask the device for these values. */
+ info->min_rx_bufsize = 32;
+ info->max_rx_pktlen = 65536;
+ /*
+ * Since we need one CQ per QP, the limit is the minimum number
+ * between the two values.
+ */
+ max = ((priv->device_attr.max_cq > priv->device_attr.max_qp) ?
+ priv->device_attr.max_qp : priv->device_attr.max_cq);
+ /* If max >= 65535 then max = 0, max_rx_queues is uint16_t. */
+ if (max >= 65535) {
+ max = 65535;
+ }
+ info->max_rx_queues = max;
+ info->max_tx_queues = max;
+ info->max_mac_addrs = elemof(priv->mac);
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to get device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] stats
+ * Stats structure output buffer.
+ */
+static void
+mlx4_stats_get(struct rte_eth_dev *dev, struct rte_eth_stats *stats)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct rte_eth_stats tmp = { .ipackets = 0 };
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ /* Add software counters. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+
+ if (rxq == NULL)
+ continue;
+ idx = rxq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_ipackets[idx] += rxq->stats.ipackets;
+ tmp.q_ibytes[idx] += rxq->stats.ibytes;
+#endif
+ tmp.q_errors[idx] += (rxq->stats.idropped +
+ rxq->stats.rx_nombuf);
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.ipackets += rxq->stats.ipackets;
+ tmp.ibytes += rxq->stats.ibytes;
+#endif
+ tmp.ierrors += rxq->stats.idropped;
+ tmp.rx_nombuf += rxq->stats.rx_nombuf;
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ struct txq *txq = (*priv->txqs)[i];
+
+ if (txq == NULL)
+ continue;
+ idx = txq->stats.idx;
+ if (idx < RTE_ETHDEV_QUEUE_STAT_CNTRS) {
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.q_opackets[idx] += txq->stats.opackets;
+ tmp.q_obytes[idx] += txq->stats.obytes;
+#endif
+ tmp.q_errors[idx] += txq->stats.odropped;
+ }
+#ifdef MLX4_PMD_SOFT_COUNTERS
+ tmp.opackets += txq->stats.opackets;
+ tmp.obytes += txq->stats.obytes;
+#endif
+ tmp.oerrors += txq->stats.odropped;
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: retrieve and add hardware counters. */
+#endif
+ *stats = tmp;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to clear device statistics.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_stats_reset(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int idx;
+
+ priv_lock(priv);
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->rxqs)[i]->stats =
+ (struct mlx4_rxq_stats){ .idx = idx };
+ }
+ for (i = 0; (i != priv->txqs_n); ++i) {
+ if ((*priv->txqs)[i] == NULL)
+ continue;
+ idx = (*priv->rxqs)[i]->stats.idx;
+ (*priv->txqs)[i]->stats =
+ (struct mlx4_txq_stats){ .idx = idx };
+ }
+#ifndef MLX4_PMD_SOFT_COUNTERS
+ /* FIXME: reset hardware counters. */
+#endif
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to remove a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param index
+ * MAC address index.
+ */
+static void
+mlx4_mac_addr_remove(struct rte_eth_dev *dev, uint32_t index)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ priv_lock(priv);
+ DEBUG("%p: removing MAC address from index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to remove the broadcast address, this one is special. */
+ if (!memcmp(priv->mac[index].addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_del(priv, index);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to add a MAC address.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param mac_addr
+ * MAC address to register.
+ * @param index
+ * MAC address index.
+ * @param vmdq
+ * VMDq pool index to associate address with (ignored).
+ */
+static void
+mlx4_mac_addr_add(struct rte_eth_dev *dev, struct ether_addr *mac_addr,
+ uint32_t index, uint32_t vmdq)
+{
+ struct priv *priv = dev->data->dev_private;
+
+ (void)vmdq;
+ priv_lock(priv);
+ DEBUG("%p: adding MAC address at index %" PRIu32,
+ (void *)dev, index);
+ if (index >= MLX4_MAX_MAC_ADDRESSES)
+ goto end;
+ /* Refuse to add the broadcast address, this one is special. */
+ if (!memcmp(mac_addr->addr_bytes, "\xff\xff\xff\xff\xff\xff",
+ ETHER_ADDR_LEN))
+ goto end;
+ priv_mac_addr_add(priv, index,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac_addr->addr_bytes);
+end:
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_promiscuous_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_promiscuous_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->promisc = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable promiscuous mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->promisc) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_promiscuous_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_promiscuous_disable((*priv->rxqs)[i]);
+end:
+ priv->promisc = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to enable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ int ret;
+
+ priv_lock(priv);
+ if (priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ /* If device isn't started, this is all we need to do. */
+ if (!priv->started)
+ goto end;
+ if (priv->rss) {
+ ret = rxq_allmulticast_enable(&priv->rxq_parent);
+ if (ret) {
+ priv_unlock(priv);
+ return;
+ }
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ ret = rxq_allmulticast_enable((*priv->rxqs)[i]);
+ if (!ret)
+ continue;
+ /* Failure, rollback. */
+ while (i != 0)
+ if ((*priv->rxqs)[--i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+ priv_unlock(priv);
+ return;
+ }
+end:
+ priv->allmulti = 1;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to disable allmulti mode.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ */
+static void
+mlx4_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+
+ priv_lock(priv);
+ if (!priv->allmulti) {
+ priv_unlock(priv);
+ return;
+ }
+ if (priv->rss) {
+ rxq_allmulticast_disable(&priv->rxq_parent);
+ goto end;
+ }
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_allmulticast_disable((*priv->rxqs)[i]);
+end:
+ priv->allmulti = 0;
+ priv_unlock(priv);
+}
+
+/**
+ * DPDK callback to retrieve physical link information (unlocked version).
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update_unlocked(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ibv_port_attr port_attr;
+ static const uint8_t width_mult[] = {
+ /* Multiplier values taken from devinfo.c in libibverbs. */
+ 0, 1, 4, 0, 8, 0, 0, 0, 12, 0
+ };
+
+ (void)wait_to_complete;
+ if ((errno = ibv_query_port(priv->ctx, priv->port, &port_attr))) {
+ WARN("port query failed: %s", strerror(errno));
+ return -1;
+ }
+ dev->data->dev_link = (struct rte_eth_link){
+ .link_speed = (ibv_rate_to_mbps(mult_to_ibv_rate
+ (port_attr.active_speed)) *
+ width_mult[(port_attr.active_width %
+ sizeof(width_mult))]),
+ .link_duplex = ETH_LINK_FULL_DUPLEX,
+ .link_status = (port_attr.state == IBV_PORT_ACTIVE)
+ };
+ if (memcmp(&port_attr, &priv->port_attr, sizeof(port_attr))) {
+ /* Link status changed. */
+ priv->port_attr = port_attr;
+ return 0;
+ }
+ /* Link status is still the same. */
+ return -1;
+}
+
+/**
+ * DPDK callback to retrieve physical link information.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param wait_to_complete
+ * Wait for request completion (ignored).
+ */
+static int
+mlx4_link_update(struct rte_eth_dev *dev, int wait_to_complete)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = mlx4_link_update_unlocked(dev, wait_to_complete);
+ priv_unlock(priv);
+ return ret;
+}
+
+/**
+ * DPDK callback to change the MTU.
+ *
+ * Setting the MTU affects hardware MRU (packets larger than the MTU cannot be
+ * received). Use this as a hint to enable/disable scattered packets support
+ * and improve performance when not needed.
+ * Since failure is not an option, reconfiguring queues on the fly is not
+ * recommended.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param in_mtu
+ * New MTU.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_mtu(struct rte_eth_dev *dev, uint16_t mtu)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret = 0;
+ unsigned int i;
+ uint16_t (*rx_func)(void *, struct rte_mbuf **, uint16_t) =
+ mlx4_rx_burst;
+
+ priv_lock(priv);
+ /* Set kernel interface MTU first. */
+ if (priv_set_mtu(priv, mtu)) {
+ ret = errno;
+ WARN("cannot set port %u MTU to %u: %s", priv->port, mtu,
+ strerror(ret));
+ goto out;
+ }
+ else
+ DEBUG("adapter port %u MTU set to %u", priv->port, mtu);
+ priv->mtu = mtu;
+ /* Temporarily replace RX handler with a fake one, assuming it has not
+ * been copied elsewhere. */
+ dev->rx_pkt_burst = removed_rx_burst;
+ /* Make sure everyone has left mlx4_rx_burst() and uses
+ * removed_rx_burst() instead. */
+ rte_wmb();
+ usleep(1000);
+ /* Reconfigure each RX queue. */
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ struct rxq *rxq = (*priv->rxqs)[i];
+ unsigned int max_frame_len;
+ int sp;
+
+ if (rxq == NULL)
+ continue;
+ /* Calculate new maximum frame length according to MTU and
+ * toggle scattered support (sp) if necessary. */
+ max_frame_len = (priv->mtu + ETHER_HDR_LEN +
+ (ETHER_MAX_VLAN_FRAME_LEN - ETHER_MAX_LEN));
+ sp = (max_frame_len > (rxq->mb_len - RTE_PKTMBUF_HEADROOM));
+ /* Provide new values to rxq_setup(). */
+ dev->data->dev_conf.rxmode.jumbo_frame = sp;
+ dev->data->dev_conf.rxmode.max_rx_pkt_len = max_frame_len;
+ if ((ret = rxq_rehash(dev, rxq))) {
+ /* Force SP RX if that queue requires it and abort. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ break;
+ }
+ /* Reenable non-RSS queue attributes. No need to check
+ * for errors at this stage. */
+ if (!priv->rss) {
+ rxq_mac_addrs_add(rxq);
+ if (priv->promisc)
+ rxq_promiscuous_enable(rxq);
+ if (priv->allmulti)
+ rxq_allmulticast_enable(rxq);
+ }
+ /* Scattered burst function takes priority. */
+ if (rxq->sp)
+ rx_func = mlx4_rx_burst_sp;
+ }
+ /* Burst functions can now be called again. */
+ rte_wmb();
+ dev->rx_pkt_burst = rx_func;
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to get flow control status.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[out] fc_conf
+ * Flow control output buffer.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_get_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_GPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_GPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+
+ fc_conf->autoneg = ethpause.autoneg;
+ if (ethpause.rx_pause && ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_FULL;
+ else if (ethpause.rx_pause)
+ fc_conf->mode = RTE_FC_RX_PAUSE;
+ else if (ethpause.tx_pause)
+ fc_conf->mode = RTE_FC_TX_PAUSE;
+ else
+ fc_conf->mode = RTE_FC_NONE;
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * DPDK callback to modify flow control parameters.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param[in] fc_conf
+ * Flow control parameters.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_dev_set_flow_ctrl(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+ struct priv *priv = dev->data->dev_private;
+ struct ifreq ifr;
+ struct ethtool_pauseparam ethpause = {
+ .cmd = ETHTOOL_SPAUSEPARAM
+ };
+ int ret;
+
+ ifr.ifr_data = ðpause;
+ ethpause.autoneg = fc_conf->autoneg;
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_RX_PAUSE))
+ ethpause.rx_pause = 1;
+ else
+ ethpause.rx_pause = 0;
+
+ if (((fc_conf->mode & RTE_FC_FULL) == RTE_FC_FULL) ||
+ (fc_conf->mode & RTE_FC_TX_PAUSE))
+ ethpause.tx_pause = 1;
+ else
+ ethpause.tx_pause = 0;
+
+ priv_lock(priv);
+ if (priv_ifreq(priv, SIOCETHTOOL, &ifr)) {
+ ret = errno;
+ WARN("ioctl(SIOCETHTOOL, ETHTOOL_SPAUSEPARAM)"
+ " failed: %s",
+ strerror(ret));
+ goto out;
+ }
+ ret = 0;
+
+out:
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+/**
+ * Configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, errno value on failure.
+ */
+static int
+vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ unsigned int i;
+ unsigned int j = -1;
+
+ DEBUG("%p: %s VLAN filter ID %" PRIu16,
+ (void *)dev, (on ? "enable" : "disable"), vlan_id);
+ for (i = 0; (i != elemof(priv->vlan_filter)); ++i) {
+ if (!priv->vlan_filter[i].enabled) {
+ /* Unused index, remember it. */
+ j = i;
+ continue;
+ }
+ if (priv->vlan_filter[i].id != vlan_id)
+ continue;
+ /* This VLAN ID is already known, use its index. */
+ j = i;
+ break;
+ }
+ /* Check if there's room for another VLAN filter. */
+ if (j == (unsigned int)-1)
+ return ENOMEM;
+ /*
+ * VLAN filters apply to all configured MAC addresses, flow
+ * specifications must be reconfigured accordingly.
+ */
+ priv->vlan_filter[j].id = vlan_id;
+ if ((on) && (!priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is disabled, enable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 1;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ }
+ else if ((!on) && (priv->vlan_filter[j].enabled)) {
+ /*
+ * Filter is enabled, disable it.
+ * Rehashing flows in all RX queues is necessary.
+ */
+ if (priv->rss)
+ rxq_mac_addrs_del(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i)
+ if ((*priv->rxqs)[i] != NULL)
+ rxq_mac_addrs_del((*priv->rxqs)[i]);
+ priv->vlan_filter[j].enabled = 0;
+ if (priv->started) {
+ if (priv->rss)
+ rxq_mac_addrs_add(&priv->rxq_parent);
+ else
+ for (i = 0; (i != priv->rxqs_n); ++i) {
+ if ((*priv->rxqs)[i] == NULL)
+ continue;
+ rxq_mac_addrs_add((*priv->rxqs)[i]);
+ }
+ }
+ }
+ return 0;
+}
+
+/**
+ * DPDK callback to configure a VLAN filter.
+ *
+ * @param dev
+ * Pointer to Ethernet device structure.
+ * @param vlan_id
+ * VLAN ID to filter.
+ * @param on
+ * Toggle filter.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_vlan_filter_set(struct rte_eth_dev *dev, uint16_t vlan_id, int on)
+{
+ struct priv *priv = dev->data->dev_private;
+ int ret;
+
+ priv_lock(priv);
+ ret = vlan_filter_set(dev, vlan_id, on);
+ priv_unlock(priv);
+ assert(ret >= 0);
+ return -ret;
+}
+
+static struct eth_dev_ops mlx4_dev_ops = {
+ .dev_configure = mlx4_dev_configure,
+ .dev_start = mlx4_dev_start,
+ .dev_stop = mlx4_dev_stop,
+ .dev_close = mlx4_dev_close,
+ .promiscuous_enable = mlx4_promiscuous_enable,
+ .promiscuous_disable = mlx4_promiscuous_disable,
+ .allmulticast_enable = mlx4_allmulticast_enable,
+ .allmulticast_disable = mlx4_allmulticast_disable,
+ .link_update = mlx4_link_update,
+ .stats_get = mlx4_stats_get,
+ .stats_reset = mlx4_stats_reset,
+ .queue_stats_mapping_set = NULL,
+ .dev_infos_get = mlx4_dev_infos_get,
+ .vlan_filter_set = mlx4_vlan_filter_set,
+ .vlan_tpid_set = NULL,
+ .vlan_strip_queue_set = NULL,
+ .vlan_offload_set = NULL,
+ .rx_queue_setup = mlx4_rx_queue_setup,
+ .tx_queue_setup = mlx4_tx_queue_setup,
+ .rx_queue_release = mlx4_rx_queue_release,
+ .tx_queue_release = mlx4_tx_queue_release,
+ .dev_led_on = NULL,
+ .dev_led_off = NULL,
+ .flow_ctrl_get = mlx4_dev_get_flow_ctrl,
+ .flow_ctrl_set = mlx4_dev_set_flow_ctrl,
+ .priority_flow_ctrl_set = NULL,
+ .mac_addr_remove = mlx4_mac_addr_remove,
+ .mac_addr_add = mlx4_mac_addr_add,
+ .mtu_set = mlx4_dev_set_mtu,
+ .fdir_add_signature_filter = NULL,
+ .fdir_update_signature_filter = NULL,
+ .fdir_remove_signature_filter = NULL,
+ .fdir_add_perfect_filter = NULL,
+ .fdir_update_perfect_filter = NULL,
+ .fdir_remove_perfect_filter = NULL,
+ .fdir_set_masks = NULL
+};
+
+/**
+ * Get PCI information from struct ibv_device.
+ *
+ * @param device
+ * Pointer to Ethernet device structure.
+ * @param[out] pci_addr
+ * PCI bus address output buffer.
+ *
+ * @return
+ * 0 on success, -1 on failure and errno is set.
+ */
+static int
+mlx4_ibv_device_to_pci_addr(const struct ibv_device *device,
+ struct rte_pci_addr *pci_addr)
+{
+ FILE *file;
+ char line[32];
+ MKSTR(path, "%s/device/uevent", device->ibdev_path);
+
+ file = fopen(path, "rb");
+ if (file == NULL)
+ return -1;
+ while (fgets(line, sizeof(line), file) == line) {
+ size_t len = strlen(line);
+ int ret;
+
+ /* Truncate long lines. */
+ if (len == (sizeof(line) - 1))
+ while (line[(len - 1)] != '\n') {
+ ret = fgetc(file);
+ if (ret == EOF)
+ break;
+ line[(len - 1)] = ret;
+ }
+ /* Extract information. */
+ if (sscanf(line,
+ "PCI_SLOT_NAME="
+ "%" SCNx16 ":%" SCNx8 ":%" SCNx8 ".%" SCNx8 "\n",
+ &pci_addr->domain,
+ &pci_addr->bus,
+ &pci_addr->devid,
+ &pci_addr->function) == 4) {
+ ret = 0;
+ break;
+ }
+ }
+ fclose(file);
+ return 0;
+}
+
+/**
+ * Derive MAC address from port GID.
+ *
+ * @param[out] mac
+ * MAC address output buffer.
+ * @param port
+ * Physical port number.
+ * @param[in] gid
+ * Port GID.
+ */
+static void
+mac_from_gid(uint8_t (*mac)[ETHER_ADDR_LEN], uint32_t port, uint8_t *gid)
+{
+ memcpy(&(*mac)[0], gid + 8, 3);
+ memcpy(&(*mac)[3], gid + 13, 3);
+ if (port == 1)
+ (*mac)[0] ^= 2;
+}
+
+/* Support up to 32 adapters. */
+static struct {
+ struct rte_pci_addr pci_addr; /* associated PCI address */
+ uint32_t ports; /* physical ports bitfield. */
+} mlx4_dev[32];
+
+/**
+ * Get device index in mlx4_dev[] from PCI bus address.
+ *
+ * @param[in] pci_addr
+ * PCI bus address to look for.
+ *
+ * @return
+ * mlx4_dev[] index on success, -1 on failure.
+ */
+static int
+mlx4_dev_idx(struct rte_pci_addr *pci_addr)
+{
+ unsigned int i;
+ int ret = -1;
+
+ assert(pci_addr != NULL);
+ for (i = 0; (i != elemof(mlx4_dev)); ++i) {
+ if ((mlx4_dev[i].pci_addr.domain == pci_addr->domain) &&
+ (mlx4_dev[i].pci_addr.bus == pci_addr->bus) &&
+ (mlx4_dev[i].pci_addr.devid == pci_addr->devid) &&
+ (mlx4_dev[i].pci_addr.function == pci_addr->function))
+ return i;
+ if ((mlx4_dev[i].ports == 0) && (ret == -1))
+ ret = i;
+ }
+ return ret;
+}
+
+/**
+ * Retrieve integer value from environment variable.
+ *
+ * @param[in] name
+ * Environment variable name.
+ *
+ * @return
+ * Integer value, 0 if the variable is not set.
+ */
+static int
+mlx4_getenv_int(const char *name)
+{
+ const char *val = getenv(name);
+
+ if (val == NULL)
+ return 0;
+ return atoi(val);
+}
+
+static struct eth_driver mlx4_driver;
+
+/**
+ * DPDK callback to register a PCI device.
+ *
+ * This function creates an Ethernet device for each port of a given
+ * PCI device.
+ *
+ * @param[in] pci_drv
+ * PCI driver structure (mlx4_driver).
+ * @param[in] pci_dev
+ * PCI device information.
+ *
+ * @return
+ * 0 on success, negative errno value on failure.
+ */
+static int
+mlx4_pci_devinit(struct rte_pci_driver *pci_drv, struct rte_pci_device *pci_dev)
+{
+ struct ibv_device **list;
+ struct ibv_device *ibv_dev;
+ int err = 0;
+ struct ibv_context *attr_ctx = NULL;
+ struct ibv_device_attr device_attr;
+ unsigned int vf;
+ int idx;
+ int i;
+
+ (void)pci_drv;
+ assert(pci_drv == &mlx4_driver.pci_drv);
+ /* Get mlx4_dev[] index. */
+ idx = mlx4_dev_idx(&pci_dev->addr);
+ if (idx == -1) {
+ ERROR("this driver cannot support any more adapters");
+ return -ENOMEM;
+ }
+ DEBUG("using driver device index %d", idx);
+
+ /* Save PCI address. */
+ mlx4_dev[idx].pci_addr = pci_dev->addr;
+ list = ibv_get_device_list(&i);
+ if (list == NULL) {
+ assert(errno);
+ return -errno;
+ }
+ assert(i >= 0);
+ /*
+ * For each listed device, check related sysfs entry against
+ * the provided PCI ID.
+ */
+ while (i != 0) {
+ struct rte_pci_addr pci_addr;
+
+ --i;
+ DEBUG("checking device \"%s\"", list[i]->name);
+ if (mlx4_ibv_device_to_pci_addr(list[i], &pci_addr))
+ continue;
+ if ((pci_dev->addr.domain != pci_addr.domain) ||
+ (pci_dev->addr.bus != pci_addr.bus) ||
+ (pci_dev->addr.devid != pci_addr.devid) ||
+ (pci_dev->addr.function != pci_addr.function))
+ continue;
+ vf = (pci_dev->id.device_id ==
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF);
+ INFO("PCI information matches, using device \"%s\" (VF: %s)",
+ list[i]->name, (vf ? "true" : "false"));
+ attr_ctx = ibv_open_device(list[i]);
+ err = errno;
+ break;
+ }
+ if (attr_ctx == NULL) {
+ if (err == 0)
+ err = ENODEV;
+ ibv_free_device_list(list);
+ assert(err > 0);
+ return -err;
+ }
+ ibv_dev = list[i];
+
+ DEBUG("device opened");
+ if (ibv_query_device(attr_ctx, &device_attr))
+ goto error;
+ INFO("%u port(s) detected", device_attr.phys_port_cnt);
+
+ for (i = 0; i < device_attr.phys_port_cnt; i++) {
+ uint32_t port = i + 1; /* ports are indexed from one */
+ uint32_t test = (1 << i);
+ struct ibv_context *ctx = NULL;
+ struct ibv_port_attr port_attr;
+ struct ibv_pd *pd = NULL;
+ struct priv *priv = NULL;
+ struct rte_eth_dev *eth_dev;
+#if defined(INLINE_RECV) || defined(RSS_SUPPORT)
+ struct ibv_exp_device_attr exp_device_attr;
+#endif
+ struct ether_addr mac;
+ union ibv_gid temp_gid;
+
+#ifdef RSS_SUPPORT
+ exp_device_attr.comp_mask =
+ (IBV_EXP_DEVICE_ATTR_EXP_CAP_FLAGS |
+ IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ);
+#endif /* RSS_SUPPORT */
+
+ DEBUG("using port %u (%08" PRIx32 ")", port, test);
+
+ ctx = ibv_open_device(ibv_dev);
+ if (ctx == NULL)
+ goto port_error;
+
+ /* Check port status. */
+ if ((err = ibv_query_port(ctx, port, &port_attr))) {
+ ERROR("port query failed: %s", strerror(err));
+ goto port_error;
+ }
+ if (port_attr.state != IBV_PORT_ACTIVE)
+ WARN("bad state for port %d: \"%s\" (%d)",
+ port, ibv_port_state_str(port_attr.state),
+ port_attr.state);
+
+ /* Allocate protection domain. */
+ pd = ibv_alloc_pd(ctx);
+ if (pd == NULL) {
+ ERROR("PD allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ mlx4_dev[idx].ports |= test;
+
+ /* from rte_ethdev.c */
+ priv = rte_zmalloc("ethdev private structure",
+ sizeof(*priv),
+ RTE_CACHE_LINE_SIZE);
+ if (priv == NULL) {
+ ERROR("priv allocation failure");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ priv->ctx = ctx;
+ priv->device_attr = device_attr;
+ priv->port_attr = port_attr;
+ priv->port = port;
+ priv->pd = pd;
+ priv->mtu = ETHER_MTU;
+#ifdef RSS_SUPPORT
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("experimental ibv_exp_query_device");
+ goto port_error;
+ }
+ if ((exp_device_attr.exp_device_cap_flags & IBV_EXP_DEVICE_QPG) &&
+ (exp_device_attr.exp_device_cap_flags & IBV_EXP_DEVICE_UD_RSS) &&
+ (exp_device_attr.comp_mask & IBV_EXP_DEVICE_ATTR_RSS_TBL_SZ) &&
+ (exp_device_attr.max_rss_tbl_sz > 0)) {
+ priv->hw_qpg = 1;
+ priv->hw_rss = 1;
+ priv->max_rss_tbl_sz = exp_device_attr.max_rss_tbl_sz;
+ }
+ else {
+ priv->hw_qpg = 0;
+ priv->hw_rss = 0;
+ priv->max_rss_tbl_sz = 0;
+ }
+ priv->hw_tss = !!(exp_device_attr.exp_device_cap_flags &
+ IBV_EXP_DEVICE_UD_TSS);
+ DEBUG("device flags: %s%s%s",
+ (priv->hw_qpg ? "IBV_DEVICE_QPG " : ""),
+ (priv->hw_tss ? "IBV_DEVICE_TSS " : ""),
+ (priv->hw_rss ? "IBV_DEVICE_RSS " : ""));
+ if (priv->hw_rss)
+ DEBUG("maximum RSS indirection table size: %u",
+ exp_device_attr.max_rss_tbl_sz);
+#endif /* RSS_SUPPORT */
+
+#ifdef INLINE_RECV
+ priv->inl_recv_size = mlx4_getenv_int("MLX4_INLINE_RECV_SIZE");
+
+ if (priv->inl_recv_size) {
+ exp_device_attr.comp_mask = IBV_EXP_DEVICE_ATTR_INLINE_RECV_SZ;
+ if (ibv_exp_query_device(ctx, &exp_device_attr)) {
+ INFO("Couldn't query device for inline-receive capabilities.");
+ priv->inl_recv_size = 0;
+ } else {
+ if ((unsigned int)exp_device_attr.inline_recv_sz < priv->inl_recv_size) {
+ INFO("Max inline-receive(%d) < Requested inline-receive(%u)",
+ exp_device_attr.inline_recv_sz, priv->inl_recv_size);
+ priv->inl_recv_size = exp_device_attr.inline_recv_sz;
+ }
+ }
+ INFO("Set inline receive size to %u", priv->inl_recv_size);
+ }
+#endif /* INLINE_RECV */
+
+#ifdef MLX4_COMPAT_VMWARE
+ if (mlx4_getenv_int("MLX4_COMPAT_VMWARE"))
+ priv->vmware = 1;
+#else /* MLX4_COMPAT_VMWARE */
+ (void)mlx4_getenv_int;
+#endif /* MLX4_COMPAT_VMWARE */
+ priv->vf = vf;
+ if (ibv_query_gid(ctx, port, 0, &temp_gid)) {
+ ERROR("ibv_query_gid() failure");
+ goto port_error;
+ }
+ /* Configure the first MAC address by default. */
+ mac_from_gid(&mac.addr_bytes, port, temp_gid.raw);
+ INFO("port %u MAC address is %02x:%02x:%02x:%02x:%02x:%02x",
+ priv->port,
+ mac.addr_bytes[0], mac.addr_bytes[1],
+ mac.addr_bytes[2], mac.addr_bytes[3],
+ mac.addr_bytes[4], mac.addr_bytes[5]);
+ /* Register MAC and broadcast addresses. */
+ claim_zero(priv_mac_addr_add(priv, 0,
+ (const uint8_t (*)[ETHER_ADDR_LEN])
+ mac.addr_bytes));
+ claim_zero(priv_mac_addr_add(priv, 1,
+ &(const uint8_t [ETHER_ADDR_LEN])
+ { "\xff\xff\xff\xff\xff\xff" }));
+#ifndef NDEBUG
+ {
+ char ifname[IF_NAMESIZE];
+
+ if (priv_get_ifname(priv, &ifname) == 0)
+ DEBUG("port %u ifname is \"%s\"", priv->port, ifname);
+ else
+ DEBUG("port %u ifname is unknown", priv->port);
+ }
+#endif
+ /* Get actual MTU if possible. */
+ priv_get_mtu(priv, &priv->mtu);
+ DEBUG("port %u MTU is %u", priv->port, priv->mtu);
+
+ /* from rte_ethdev.c */
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ {
+ char name[RTE_ETH_NAME_MAX_LEN];
+
+ snprintf(name, sizeof(name), "%s port %u",
+ ibv_get_device_name(ibv_dev), port);
+ eth_dev = rte_eth_dev_allocate(name);
+ }
+#else
+ eth_dev = rte_eth_dev_allocate();
+#endif
+ if (eth_dev == NULL) {
+ ERROR("can not allocate rte ethdev");
+ err = ENOMEM;
+ goto port_error;
+ }
+
+ eth_dev->data->dev_private = priv;
+ eth_dev->pci_dev = pci_dev;
+ eth_dev->driver = &mlx4_driver;
+ eth_dev->data->rx_mbuf_alloc_failed = 0;
+#if RTE_VERSION >= RTE_VERSION_NUM(1, 7, 0, 0)
+ eth_dev->data->mtu = ETHER_MTU;
+#else
+ eth_dev->data->max_frame_size = ETHER_MAX_LEN;
+#endif
+
+ priv->dev = eth_dev;
+ eth_dev->dev_ops = &mlx4_dev_ops;
+ eth_dev->data->mac_addrs = priv->mac;
+
+ /* Bring Ethernet device up. */
+ DEBUG("forcing Ethernet interface up");
+ priv_set_flags(priv, ~IFF_UP, IFF_UP);
+ continue;
+
+port_error:
+ if (priv)
+ rte_free(priv);
+ if (pd)
+ claim_zero(ibv_dealloc_pd(pd));
+ if (ctx)
+ claim_zero(ibv_close_device(ctx));
+ break;
+ }
+
+ /*
+ * XXX if something went wrong in the loop above, there is a resource
+ * leak (ctx, pd, priv, dpdk ethdev) but we can do nothing about it as
+ * long as the dpdk does not provide a way to deallocate a ethdev and a
+ * way to enumerate the registered ethdevs to free the previous ones.
+ */
+
+ /* no port found, complain */
+ if (!mlx4_dev[idx].ports) {
+ err = ENODEV;
+ goto error;
+ }
+
+error:
+ if (attr_ctx)
+ claim_zero(ibv_close_device(attr_ctx));
+ if (list)
+ ibv_free_device_list(list);
+ assert(err >= 0);
+ return -err;
+}
+
+static struct rte_pci_id mlx4_pci_id_map[] = {
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = PCI_VENDOR_ID_MELLANOX,
+ .device_id = PCI_DEVICE_ID_MELLANOX_CONNECTX3VF,
+ .subsystem_vendor_id = PCI_ANY_ID,
+ .subsystem_device_id = PCI_ANY_ID
+ },
+ {
+ .vendor_id = 0
+ }
+};
+
+static struct eth_driver mlx4_driver = {
+ .pci_drv = {
+ .name = MLX4_DRIVER_NAME,
+ .id_table = mlx4_pci_id_map,
+ .devinit = mlx4_pci_devinit,
+ },
+ .dev_private_size = sizeof(struct priv)
+};
+
+/**
+ * Driver initialization routine.
+ */
+static int
+rte_mlx4_pmd_init(const char *name, const char *args)
+{
+ (void)name;
+ (void)args;
+ rte_eal_pci_register(&mlx4_driver.pci_drv);
+ return 0;
+}
+
+static struct rte_driver rte_mlx4_driver = {
+ .type = PMD_PDEV,
+ .name = MLX4_DRIVER_NAME,
+ .init = rte_mlx4_pmd_init,
+};
+
+PMD_REGISTER_DRIVER(rte_mlx4_driver)
diff --git a/lib/librte_pmd_mlx4/mlx4.h b/lib/librte_pmd_mlx4/mlx4.h
new file mode 100644
index 0000000..4743a64
--- /dev/null
+++ b/lib/librte_pmd_mlx4/mlx4.h
@@ -0,0 +1,166 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2012-2015 6WIND S.A.
+ * Copyright(c) 2012 Mellanox.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of 6WIND S.A. nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_PMD_MLX4_H_
+#define RTE_PMD_MLX4_H_
+
+#include <stddef.h>
+#include <stdint.h>
+#include <limits.h>
+
+/*
+ * Maximum number of simultaneous MAC addresses supported.
+ *
+ * According to ConnectX's Programmer Reference Manual:
+ * The L2 Address Match is implemented by comparing a MAC/VLAN combination
+ * of 128 MAC addresses and 127 VLAN values, comprising 128x127 possible
+ * L2 addresses.
+ */
+#define MLX4_MAX_MAC_ADDRESSES 128
+
+/* Maximum number of simultaneous VLAN filters supported. See above. */
+#define MLX4_MAX_VLAN_IDS 127
+
+/* Maximum number of Scatter/Gather Elements per Work Request. */
+#ifndef MLX4_PMD_SGE_WR_N
+#define MLX4_PMD_SGE_WR_N 4
+#endif
+
+/* Maximum size for inline data. */
+#ifndef MLX4_PMD_MAX_INLINE
+#define MLX4_PMD_MAX_INLINE 0
+#endif
+
+/*
+ * Maximum number of cached Memory Pools (MPs) per TX queue. Each RTE MP
+ * from which buffers are to be transmitted will have to be mapped by this
+ * driver to their own Memory Region (MR). This is a slow operation.
+ *
+ * This value is always 1 for RX queues.
+ */
+#ifndef MLX4_PMD_TX_MP_CACHE
+#define MLX4_PMD_TX_MP_CACHE 8
+#endif
+
+/*
+ * If defined, only use software counters. The PMD will never ask the hardware
+ * for these, and many of them won't be available.
+ */
+#ifndef MLX4_PMD_SOFT_COUNTERS
+#define MLX4_PMD_SOFT_COUNTERS 1
+#endif
+
+/*
+ * If defined, enable VMware compatibility code. It also requires the
+ * environment variable MLX4_COMPAT_VMWARE set to a nonzero value at runtime.
+ */
+#ifndef MLX4_COMPAT_VMWARE
+#define MLX4_COMPAT_VMWARE 1
+#endif
+
+enum {
+ PCI_VENDOR_ID_MELLANOX = 0x15b3,
+};
+
+enum {
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3 = 0x1003,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3VF = 0x1004,
+ PCI_DEVICE_ID_MELLANOX_CONNECTX3PRO = 0x1007,
+};
+
+#define MLX4_DRIVER_NAME "librte_pmd_mlx4"
+
+/* Bit-field manipulation. */
+#define BITFIELD_DECLARE(bf, type, size) \
+ type bf[(((size_t)(size) / (sizeof(type) * CHAR_BIT)) + \
+ !!((size_t)(size) % (sizeof(type) * CHAR_BIT)))]
+#define BITFIELD_DEFINE(bf, type, size) \
+ BITFIELD_DECLARE((bf), type, (size)) = { 0 }
+#define BITFIELD_SET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] |= \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_RESET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ (void)((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] &= \
+ ~((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT)))))
+#define BITFIELD_ISSET(bf, b) \
+ (assert((size_t)(b) < (sizeof(bf) * CHAR_BIT)), \
+ !!(((bf)[((b) / (sizeof((bf)[0]) * CHAR_BIT))] & \
+ ((size_t)1 << ((b) % (sizeof((bf)[0]) * CHAR_BIT))))))
+
+/* Number of elements in array. */
+#define elemof(a) (sizeof(a) / sizeof((a)[0]))
+
+/* Cast pointer p to structure member m to its parent structure of type t. */
+#define containerof(p, t, m) ((t *)((uint8_t *)(p) - offsetof(t, m)))
+
+/* Branch prediction helpers. */
+#ifndef likely
+#define likely(c) __builtin_expect(!!(c), 1)
+#endif
+#ifndef unlikely
+#define unlikely(c) __builtin_expect(!!(c), 0)
+#endif
+
+/* Debugging */
+#ifndef NDEBUG
+#include <stdio.h>
+#define DEBUG__(m, ...) \
+ (fprintf(stderr, "%s:%d: %s(): " m "%c", \
+ __FILE__, __LINE__, __func__, __VA_ARGS__), \
+ fflush(stderr), \
+ (void)0)
+/*
+ * Save/restore errno around DEBUG__().
+ * XXX somewhat undefined behavior, but works.
+ */
+#define DEBUG_(...) \
+ (errno = ((int []){ \
+ *(volatile int *)&errno, \
+ (DEBUG__(__VA_ARGS__), 0) \
+ })[0])
+#define DEBUG(...) DEBUG_(__VA_ARGS__, '\n')
+#define claim_zero(...) assert((__VA_ARGS__) == 0)
+#define claim_nonzero(...) assert((__VA_ARGS__) != 0)
+#define claim_positive(...) assert((__VA_ARGS__) >= 0)
+#else /* NDEBUG */
+/* No-ops. */
+#define DEBUG(...) (void)0
+#define claim_zero(...) (__VA_ARGS__)
+#define claim_nonzero(...) (__VA_ARGS__)
+#define claim_positive(...) (__VA_ARGS__)
+#endif /* NDEBUG */
+
+#endif /* RTE_PMD_MLX4_H_ */
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 5a93b46..d1f0271 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -143,6 +143,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_VHOST),y)
LDLIBS += -lfuse
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -libverbs
+endif
+
LDLIBS += --start-group
ifeq ($(CONFIG_RTE_BUILD_COMBINE_LIBS),n)
@@ -227,6 +231,10 @@ ifeq ($(CONFIG_RTE_LIBRTE_E1000_PMD),y)
LDLIBS += -lrte_pmd_e1000
endif
+ifeq ($(CONFIG_RTE_LIBRTE_MLX4_PMD),y)
+LDLIBS += -lrte_pmd_mlx4
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_PMD_RING),y)
LDLIBS += -lrte_pmd_ring
endif
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v2 3/4] maintainers: claim responsibility for mlx4 PMD
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (3 preceding siblings ...)
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 2/4] mlx4: new poll mode driver Adrien Mazarguil
@ 2015-02-21 4:17 ` Adrien Mazarguil
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 4/4] doc: add librte_pmd_mlx4 documentation Adrien Mazarguil
2015-03-01 11:15 ` [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Keunhong Lee
6 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-21 4:17 UTC (permalink / raw)
To: dev
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
MAINTAINERS | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/MAINTAINERS b/MAINTAINERS
index 7ac6d59..b4328d6 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -217,6 +217,10 @@ Intel fm10k
M: Jing Chen <jing.d.chen@intel.com>
F: lib/librte_pmd_fm10k/
+Mellanox mlx4
+M: Adrien Mazarguil <adrien.mazarguil@6wind.com>
+F: lib/librte_pmd_mlx4/
+
RedHat virtio
M: Changchun Ouyang <changchun.ouyang@intel.com>
F: lib/librte_pmd_virtio/
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* [dpdk-dev] [PATCH v2 4/4] doc: add librte_pmd_mlx4 documentation
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (4 preceding siblings ...)
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 3/4] maintainers: claim responsibility for mlx4 PMD Adrien Mazarguil
@ 2015-02-21 4:17 ` Adrien Mazarguil
2015-03-01 11:15 ` [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Keunhong Lee
6 siblings, 0 replies; 24+ messages in thread
From: Adrien Mazarguil @ 2015-02-21 4:17 UTC (permalink / raw)
To: dev
This documentation covers implementation details, features and limitations,
configuration, prerequisites and provides a usage example.
Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com>
---
doc/guides/prog_guide/index.rst | 1 +
doc/guides/prog_guide/mlx4_poll_mode_drv.rst | 327 +++++++++++++++++++++++++++
doc/guides/prog_guide/source_org.rst | 1 +
3 files changed, 329 insertions(+)
create mode 100644 doc/guides/prog_guide/mlx4_poll_mode_drv.rst
diff --git a/doc/guides/prog_guide/index.rst b/doc/guides/prog_guide/index.rst
index de69682..87f6b35 100644
--- a/doc/guides/prog_guide/index.rst
+++ b/doc/guides/prog_guide/index.rst
@@ -56,6 +56,7 @@ Programmer's Guide
intel_dpdk_xen_based_packet_switch_sol
libpcap_ring_based_poll_mode_drv
link_bonding_poll_mode_drv_lib
+ mlx4_poll_mode_drv
timer_lib
hash_lib
lpm_lib
diff --git a/doc/guides/prog_guide/mlx4_poll_mode_drv.rst b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
new file mode 100644
index 0000000..e2c6b92
--- /dev/null
+++ b/doc/guides/prog_guide/mlx4_poll_mode_drv.rst
@@ -0,0 +1,327 @@
+.. BSD LICENSE
+ Copyright(c) 2012-2015 6WIND S.A.
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without
+ modification, are permitted provided that the following conditions
+ are met:
+
+ * Redistributions of source code must retain the above copyright
+ notice, this list of conditions and the following disclaimer.
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in
+ the documentation and/or other materials provided with the
+ distribution.
+ * Neither the name of 6WIND S.A. nor the names of its
+ contributors may be used to endorse or promote products derived
+ from this software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+MLX4 poll mode driver library
+=============================
+
+The MLX4 poll mode driver library (**librte_pmd_mlx4**) implements support
+for **Mellanox ConnectX-3** 10/40 Gbps adapters (EN 40, EN 10, Pro EN 40) as
+well as their virtual functions (VF) in SR-IOV context.
+
+.. note::
+
+ Due to external dependencies, this driver is disabled by default. It must
+ be enabled manually by setting ``CONFIG_RTE_LIBRTE_MLX4_PMD=y`` and
+ recompiling DPDK.
+
+Implementation details
+----------------------
+
+Most Mellanox ConnectX-3 devices provide two ports but expose a single PCI
+bus address, thus unlike most drivers, librte_pmd_mlx4 registers itself as a
+PCI driver that allocates one Ethernet device per detected port.
+
+For this reason, one cannot white/blacklist a single port without also
+white/blacklisting the others on the same device.
+
+Besides its dependency on libibverbs (that implies libmlx4 and associated
+kernel support), librte_pmd_mlx4 relies heavily on system calls for control
+operations such as querying/updating the MTU and flow control parameters.
+
+For security reasons and robustness, this driver only deals with virtual
+memory addresses. The way resources allocations are handled by the kernel
+combined with hardware specifications that allow it to handle virtual memory
+addresses directly ensure that DPDK applications cannot access random
+physical memory (or memory that does not belong to the current process).
+
+This capability allows the PMD to coexist with kernel network interfaces
+which remain functional, although they stop receiving unicast packets as
+long as they share the same MAC address.
+
+Compiling librte_pmd_mlx4 causes DPDK to be linked against libibverbs.
+
+Features and limitations
+------------------------
+
+- RSS, also known as RCA, is supported. In this mode the number of
+ configured RX queues must be a power of two.
+- VLAN filtering is supported.
+- Link state information is provided.
+- Promiscuous mode is supported.
+- All multicast mode is supported.
+- Multiple MAC addresses (unicast, multicast) can be configured.
+- Scattered packets are supported for TX and RX.
+
+..
+
+- RSS hash key cannot be modified.
+- Hardware counters are not implemented (they are software counters).
+- Checksum offloads are not supported yet.
+
+Configuration
+-------------
+
+Compilation options
+~~~~~~~~~~~~~~~~~~~
+
+- ``CONFIG_RTE_LIBRTE_MLX4_PMD`` (default **n**)
+
+ Toggle compilation of librte_pmd_mlx4 itself.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_DEBUG`` (default **n**)
+
+ Toggle debugging code and stricter compilation flags. Enabling this option
+ adds additional run-time checks and debugging messages at the cost of
+ lower performance.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SGE_WR_N`` (default **4**)
+
+ Number of scatter/gather elements (SGEs) per work request (WR). Lowering
+ this number improves performance but also limits the ability to receive
+ scattered packets (packets that do not fit a single mbuf). The default
+ value is a safe tradeoff.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_MAX_INLINE`` (default **0**)
+
+ Amount of data to be inlined during TX operations. Improves latency but
+ lowers throughput.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_TX_MP_CACHE`` (default **8**)
+
+ Maximum number of cached memory pools (MPs) per TX queue. Each MP from
+ which buffers are to be transmitted must be associated to memory regions
+ (MRs). This is a slow operation that must be cached.
+
+ This value is always 1 for RX queues since they use a single MP.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_SOFT_COUNTERS`` (default **1**)
+
+ Toggle software counters. No counters are available if this option is
+ disabled since hardware counters are not supported.
+
+- ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE`` (default **1**)
+
+ Toggle VMware compatibility code. It also requires the environment
+ variable ``MLX4_COMPAT_VMWARE`` set to a nonzero value at runtime.
+
+Environment variables
+~~~~~~~~~~~~~~~~~~~~~
+
+- ``MLX4_INLINE_RECV_SIZE``
+
+ A nonzero value enables inline receive for packets up to that size. May
+ significantly improve performance in some cases but lower it in
+ others. Requires careful testing.
+
+- ``MLX4_COMPAT_VMWARE``
+
+ Only supported when compiled with
+ ``CONFIG_RTE_LIBRTE_MLX4_COMPAT_VMWARE=1``. Adds workarounds to run in
+ VMware systems that do not support the flows API properly.
+
+Run-time configuration
+~~~~~~~~~~~~~~~~~~~~~~
+
+- The only constraint when RSS mode is requested is to make sure the number
+ of RX queues is a power of two. This is a hardware requirement.
+
+- librte_pmd_mlx4 brings kernel network interfaces up during initialization
+ because it is affected by their state. Forcing them down prevents packets
+ reception.
+
+- **ethtool** operations on related kernel interfaces also affect the PMD.
+
+Prerequisites
+-------------
+
+This driver relies on external libraries and kernel drivers for resources
+allocations and initialization. The following dependencies are not part of
+DPDK and must be installed separately:
+
+- **libibverbs**
+
+ User space verbs framework used by librte_pmd_mlx4. This library provides
+ a generic interface between the kernel and low-level user space drivers
+ such as libmlx4.
+
+ It allows slow and privileged operations (context initialization, hardware
+ resources allocations) to be managed by the kernel and fast operations to
+ never leave user space.
+
+- **libmlx4**
+
+ Low-level user space driver library for Mellanox ConnectX-3 devices,
+ it is automatically loaded by libibverbs.
+
+ This library basically implements send/receive calls to the hardware
+ queues.
+
+- **Kernel modules** (mlnx-ofed-kernel)
+
+ They provide the kernel-side verbs API and low level device drivers that
+ manage actual hardware initialization and resources sharing with user
+ space processes.
+
+ Unlike most other PMDs, these modules must remain loaded and bound to
+ their devices:
+
+ - mlx4_core: hardware driver managing Mellanox ConnectX-3 devices.
+ - mlx4_en: Ethernet device driver that provides kernel network interfaces.
+ - mlx4_ib: InifiniBand device driver.
+ - ib_uverbs: user space driver for verbs (entry point for libibverbs).
+
+While these libraries and kernel modules are available on OpenFabrics
+Aliance's `website <https://www.openfabrics.org/>`_ and provided by package
+managers on most distributions, this PMD requires Ethernet extensions that
+may not be supported at the moment (this is a work in progress).
+
+`Mellanox OFED
+<http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers>`_
+includes the necessary support and should be used in the meantime. For DPDK,
+only libibverbs, libmlx4 and mlnx-ofed-kernel packages are required from
+that distribution.
+
+.. note::
+
+ Both libraries are BSD and GPL licensed. Linux kernel modules are GPL
+ licensed.
+
+Usage example
+-------------
+
+This section demonstrates how to launch **testpmd** with Mellanox ConnectX-3
+devices managed by librte_pmd_mlx4.
+
+#. Load the kernel modules:
+
+ .. code-block:: console
+
+ modprobe -a ib_uverbs mlx4_en mlx4_core mlx4_ib
+
+ .. note::
+
+ User space I/O kernel modules (uio and igb_uio) are not used and do
+ not have to be loaded.
+
+#. Make sure Ethernet interfaces are in working order and linked to kernel
+ verbs. Related sysfs entries should be present:
+
+ .. code-block:: console
+
+ ls -d /sys/class/net/*/device/infiniband_verbs/uverbs* | cut -d / -f 5
+
+ Example output:
+
+ .. code-block:: console
+
+ eth2
+ eth3
+ eth4
+ eth5
+
+#. Optionally, retrieve their PCI bus addresses for whitelisting:
+
+ .. code-block:: console
+
+ {
+ for intf in eth2 eth3 eth4 eth5;
+ do
+ (cd "/sys/class/net/${intf}/device/" && pwd -P);
+ done;
+ } |
+ sed -n 's,.*/\(.*\),-w \1,p'
+
+ Example output:
+
+ .. code-block:: console
+
+ -w 0000:83:00.0
+ -w 0000:83:00.0
+ -w 0000:84:00.0
+ -w 0000:84:00.0
+
+ .. note::
+
+ There are only two distinct PCI bus addresses because the Mellanox
+ ConnectX-3 adapters installed on this system are dual port.
+
+#. Request huge pages:
+
+ .. code-block:: console
+
+ echo 1024 > /sys/kernel/mm/hugepages/hugepages-2048kB/nr_hugepages/nr_hugepages
+
+#. Start testpmd with basic parameters:
+
+ .. code-block:: console
+
+ testpmd -c 0xff00 -n 4 -w 0000:83:00.0 -w 0000:84:00.0 -- --rxq=2 --txq=2 -i
+
+ Example output:
+
+ .. code-block:: console
+
+ [...]
+ EAL: PCI device 0000:83:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_0" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:b7:50
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:b7:51
+ EAL: PCI device 0000:84:00.0 on NUMA socket 1
+ EAL: probe driver: 15b3:1007 librte_pmd_mlx4
+ PMD: librte_pmd_mlx4: PCI information matches, using device "mlx4_1" (VF: false)
+ PMD: librte_pmd_mlx4: 2 port(s) detected
+ PMD: librte_pmd_mlx4: port 1 MAC address is 00:02:c9:b5:ba:b0
+ PMD: librte_pmd_mlx4: port 2 MAC address is 00:02:c9:b5:ba:b1
+ Interactive-mode selected
+ Configuring Port 0 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867d60: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867d60: RX queues number update: 0 -> 2
+ Port 0: 00:02:C9:B5:B7:50
+ Configuring Port 1 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867da0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867da0: RX queues number update: 0 -> 2
+ Port 1: 00:02:C9:B5:B7:51
+ Configuring Port 2 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867de0: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867de0: RX queues number update: 0 -> 2
+ Port 2: 00:02:C9:B5:BA:B0
+ Configuring Port 3 (socket 0)
+ PMD: librte_pmd_mlx4: 0x867e20: TX queues number update: 0 -> 2
+ PMD: librte_pmd_mlx4: 0x867e20: RX queues number update: 0 -> 2
+ Port 3: 00:02:C9:B5:BA:B1
+ Checking link statuses...
+ Port 0 Link Up - speed 10000 Mbps - full-duplex
+ Port 1 Link Up - speed 40000 Mbps - full-duplex
+ Port 2 Link Up - speed 10000 Mbps - full-duplex
+ Port 3 Link Up - speed 40000 Mbps - full-duplex
+ Done
+ testpmd>
diff --git a/doc/guides/prog_guide/source_org.rst b/doc/guides/prog_guide/source_org.rst
index c8ca54f..c66ad16 100644
--- a/doc/guides/prog_guide/source_org.rst
+++ b/doc/guides/prog_guide/source_org.rst
@@ -83,6 +83,7 @@ The lib directory contains::
+-- librte_pmd_e1000 # 1GbE poll mode drivers (igb and em)
+-- librte_pmd_ixgbe # 10GbE poll mode driver
+-- librte_pmd_i40e # 40GbE poll mode driver
+ +-- librte_pmd_mlx4 # Mellanox ConnectX-3 poll mode driver
+-- librte_pmd_pcap # PCAP poll mode driver
+-- librte_pmd_ring # ring poll mode driver
+-- librte_pmd_virtio # virtio poll mode driver
--
2.1.0
^ permalink raw reply [flat|nested] 24+ messages in thread* Re: [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD
2015-01-29 15:20 [dpdk-dev] [PATCH 0/2] Mellanox ConnectX-3 PMD Adrien Mazarguil
` (5 preceding siblings ...)
2015-02-21 4:17 ` [dpdk-dev] [PATCH v2 4/4] doc: add librte_pmd_mlx4 documentation Adrien Mazarguil
@ 2015-03-01 11:15 ` Keunhong Lee
6 siblings, 0 replies; 24+ messages in thread
From: Keunhong Lee @ 2015-03-01 11:15 UTC (permalink / raw)
To: Adrien Mazarguil; +Cc: dev
How fast does this driver perform?
Is it capable for sending/receiving 64B packets at 40G line rate?
I'm using another version of user driver and it is not scalable for line
rate, regardless of the number of TX cores.
Keunhong.
2015. 1. 30. 오전 12:22에 "Adrien Mazarguil" <adrien.mazarguil@6wind.com>님이 작성:
> This PMD adds support for Mellanox ConnectX-3-based adapters through the
> verbs framework. It relies on external libraries (libibverbs and user space
> driver libmlx4) and kernel support to do so.
>
> While these libraries and kernel modules are available on OpenFabrics
> Alliance's website [1] and provided by package managers on most
> distributions, this PMD requires Ethernet extensions that may not be
> supported at the moment (this is a work in progress).
>
> Mellanox OFED [2] includes the necessary support and should be used in the
> meantime. For DPDK, only libibverbs, libmlx4 and mlnx-ofed-kernel packages
> are required from that distribution.
>
> The following kernel modules must be loaded before using this PMD:
>
> - mlx4_core (hardware driver, does global initialization)
> - mlx4_en (Ethernet device driver)
> - mlx4_ib (InfiniBand device driver)
> - ib_uverbs (user space driver for verbs)
>
> Actual documentation will be added in V2.
>
> [1] https://www.openfabrics.org/
> [2]
> http://www.mellanox.com/page/products_dyn?product_family=26&mtag=linux_sw_drivers
>
> Adrien Mazarguil (2):
> scripts: add auto-config-h.sh
> mlx4: new poll mode driver
>
> config/common_bsdapp | 11 +
> config/common_linuxapp | 11 +
> lib/Makefile | 1 +
> lib/librte_pmd_mlx4/Makefile | 119 ++
> lib/librte_pmd_mlx4/mlx4.c | 4739
> ++++++++++++++++++++++++++++++++++++++++++
> lib/librte_pmd_mlx4/mlx4.h | 166 ++
> mk/rte.app.mk | 8 +
> scripts/auto-config-h.sh | 137 ++
> 8 files changed, 5192 insertions(+)
> create mode 100755 lib/librte_pmd_mlx4/Makefile
> create mode 100755 lib/librte_pmd_mlx4/mlx4.c
> create mode 100644 lib/librte_pmd_mlx4/mlx4.h
> create mode 100755 scripts/auto-config-h.sh
>
> --
> 2.1.0
>
>
^ permalink raw reply [flat|nested] 24+ messages in thread