From: Olivier Matz <olivier.matz@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 06/11] vdev: rename nonpci_devs as vdev
Date: Fri, 11 Apr 2014 09:36:33 +0200 [thread overview]
Message-ID: <1397201793-26580-1-git-send-email-olivier.matz@6wind.com> (raw)
In-Reply-To: <2329281.9S2dNLIOMh@xps13>
The name "nonpci_devs" for virtual devices is ambiguous as a physical
device can also be non-PCI (ex: usb, sata, ...). A better name for this
file is "vded" as it only deals with virtual devices.
This patch doesn't introduce any change except renaming.
Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
---
lib/librte_eal/common/eal_common_nonpci_devs.c | 111 -------------------------
lib/librte_eal/common/eal_common_vdev.c | 111 +++++++++++++++++++++++++
lib/librte_eal/common/include/eal_private.h | 4 +-
lib/librte_eal/linuxapp/eal/Makefile | 2 +-
lib/librte_eal/linuxapp/eal/eal.c | 4 +-
5 files changed, 116 insertions(+), 116 deletions(-)
delete mode 100644 lib/librte_eal/common/eal_common_nonpci_devs.c
create mode 100644 lib/librte_eal/common/eal_common_vdev.c
Hi Thomas,
Here is the new version, thanks for reviewing.
diff --git a/lib/librte_eal/common/eal_common_nonpci_devs.c b/lib/librte_eal/common/eal_common_nonpci_devs.c
deleted file mode 100644
index 71cbb1e..0000000
--- a/lib/librte_eal/common/eal_common_nonpci_devs.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * Copyright(c) 2014 6WIND S.A.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <string.h>
-#include <inttypes.h>
-#include <rte_string_fns.h>
-#ifdef RTE_LIBRTE_PMD_RING
-#include <rte_eth_ring.h>
-#endif
-#ifdef RTE_LIBRTE_PMD_PCAP
-#include <rte_eth_pcap.h>
-#endif
-#ifdef RTE_LIBRTE_PMD_XENVIRT
-#include <rte_eth_xenvirt.h>
-#endif
-#include <rte_debug.h>
-#include <rte_devargs.h>
-#include "eal_private.h"
-
-struct device_init {
- const char *dev_prefix;
- int (*init_fn)(const char*, const char *);
-};
-
-#define NUM_DEV_TYPES (sizeof(dev_types)/sizeof(dev_types[0]))
-struct device_init dev_types[] = {
-#ifdef RTE_LIBRTE_PMD_RING
- {
- .dev_prefix = RTE_ETH_RING_PARAM_NAME,
- .init_fn = rte_pmd_ring_init
- },
-#endif
-#ifdef RTE_LIBRTE_PMD_PCAP
- {
- .dev_prefix = RTE_ETH_PCAP_PARAM_NAME,
- .init_fn = rte_pmd_pcap_init
- },
-#endif
-#ifdef RTE_LIBRTE_PMD_XENVIRT
- {
- .dev_prefix = RTE_ETH_XENVIRT_PARAM_NAME,
- .init_fn = rte_pmd_xenvirt_init
- },
-#endif
- {
- .dev_prefix = "-nodev-",
- .init_fn = NULL
- }
-};
-
-int
-rte_eal_non_pci_ethdev_init(void)
-{
- struct rte_devargs *devargs;
- uint8_t i;
-
- /* call the init function for each virtual device */
- TAILQ_FOREACH(devargs, &devargs_list, next) {
-
- if (devargs->type != RTE_DEVTYPE_VIRTUAL)
- continue;
-
- for (i = 0; i < NUM_DEV_TYPES; i++) {
- /* search a driver prefix in virtual device name */
- if (!strncmp(dev_types[i].dev_prefix,
- devargs->virtual.drv_name,
- sizeof(dev_types[i].dev_prefix) - 1)) {
- dev_types[i].init_fn(devargs->virtual.drv_name,
- devargs->args);
- break;
- }
- }
-
- if (i == NUM_DEV_TYPES) {
- rte_panic("no driver found for %s\n",
- devargs->virtual.drv_name);
- }
- }
- return 0;
-}
diff --git a/lib/librte_eal/common/eal_common_vdev.c b/lib/librte_eal/common/eal_common_vdev.c
new file mode 100644
index 0000000..02d3fd6
--- /dev/null
+++ b/lib/librte_eal/common/eal_common_vdev.c
@@ -0,0 +1,111 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * Copyright(c) 2014 6WIND S.A.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <string.h>
+#include <inttypes.h>
+#include <rte_string_fns.h>
+#ifdef RTE_LIBRTE_PMD_RING
+#include <rte_eth_ring.h>
+#endif
+#ifdef RTE_LIBRTE_PMD_PCAP
+#include <rte_eth_pcap.h>
+#endif
+#ifdef RTE_LIBRTE_PMD_XENVIRT
+#include <rte_eth_xenvirt.h>
+#endif
+#include <rte_debug.h>
+#include <rte_devargs.h>
+#include "eal_private.h"
+
+struct device_init {
+ const char *dev_prefix;
+ int (*init_fn)(const char*, const char *);
+};
+
+#define NUM_DEV_TYPES (sizeof(dev_types)/sizeof(dev_types[0]))
+struct device_init dev_types[] = {
+#ifdef RTE_LIBRTE_PMD_RING
+ {
+ .dev_prefix = RTE_ETH_RING_PARAM_NAME,
+ .init_fn = rte_pmd_ring_init
+ },
+#endif
+#ifdef RTE_LIBRTE_PMD_PCAP
+ {
+ .dev_prefix = RTE_ETH_PCAP_PARAM_NAME,
+ .init_fn = rte_pmd_pcap_init
+ },
+#endif
+#ifdef RTE_LIBRTE_PMD_XENVIRT
+ {
+ .dev_prefix = RTE_ETH_XENVIRT_PARAM_NAME,
+ .init_fn = rte_pmd_xenvirt_init
+ },
+#endif
+ {
+ .dev_prefix = "-nodev-",
+ .init_fn = NULL
+ }
+};
+
+int
+rte_eal_vdev_init(void)
+{
+ struct rte_devargs *devargs;
+ uint8_t i;
+
+ /* call the init function for each virtual device */
+ TAILQ_FOREACH(devargs, &devargs_list, next) {
+
+ if (devargs->type != RTE_DEVTYPE_VIRTUAL)
+ continue;
+
+ for (i = 0; i < NUM_DEV_TYPES; i++) {
+ /* search a driver prefix in virtual device name */
+ if (!strncmp(dev_types[i].dev_prefix,
+ devargs->virtual.drv_name,
+ sizeof(dev_types[i].dev_prefix) - 1)) {
+ dev_types[i].init_fn(devargs->virtual.drv_name,
+ devargs->args);
+ break;
+ }
+ }
+
+ if (i == NUM_DEV_TYPES) {
+ rte_panic("no driver found for %s\n",
+ devargs->virtual.drv_name);
+ }
+ }
+ return 0;
+}
diff --git a/lib/librte_eal/common/include/eal_private.h b/lib/librte_eal/common/include/eal_private.h
index f9a019b..22d8b08 100644
--- a/lib/librte_eal/common/include/eal_private.h
+++ b/lib/librte_eal/common/include/eal_private.h
@@ -197,10 +197,10 @@ int rte_eal_intr_init(void);
int rte_eal_alarm_init(void);
/**
- * This function initialises any non-PCI i.e. dummy ethernet devices
+ * This function initialises any virtual devices
*
* This function is private to the EAL.
*/
-int rte_eal_non_pci_ethdev_init(void);
+int rte_eal_vdev_init(void);
#endif /* _EAL_PRIVATE_H_ */
diff --git a/lib/librte_eal/linuxapp/eal/Makefile b/lib/librte_eal/linuxapp/eal/Makefile
index bdd940d..00f7367 100644
--- a/lib/librte_eal/linuxapp/eal/Makefile
+++ b/lib/librte_eal/linuxapp/eal/Makefile
@@ -77,7 +77,7 @@ SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_errno.c
SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_cpuflags.c
SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_hexdump.c
SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_devargs.c
-SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_nonpci_devs.c
+SRCS-$(CONFIG_RTE_LIBRTE_EAL_LINUXAPP) += eal_common_vdev.c
CFLAGS_eal.o := -D_GNU_SOURCE
CFLAGS_eal_thread.o := -D_GNU_SOURCE
diff --git a/lib/librte_eal/linuxapp/eal/eal.c b/lib/librte_eal/linuxapp/eal/eal.c
index 905ce37..c015a65 100644
--- a/lib/librte_eal/linuxapp/eal/eal.c
+++ b/lib/librte_eal/linuxapp/eal/eal.c
@@ -1046,8 +1046,8 @@ rte_eal_init(int argc, char **argv)
rte_eal_mcfg_complete();
- if (rte_eal_non_pci_ethdev_init() < 0)
- rte_panic("Cannot init non-PCI eth_devs\n");
+ if (rte_eal_vdev_init() < 0)
+ rte_panic("Cannot init virtual devices\n");
TAILQ_FOREACH(solib, &solib_list, next) {
solib->lib_handle = dlopen(solib->name, RTLD_NOW);
--
1.8.5.3
next prev parent reply other threads:[~2014-04-11 7:35 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-02-28 17:25 [dpdk-dev] [PATCH 00/11] eal: allow virtual pmd drivers as shared lib Olivier Matz
2014-02-28 17:25 ` [dpdk-dev] [PATCH 01/11] mk: use whole-archive option when creating dpdk binaries Olivier Matz
2014-04-10 13:58 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 02/11] devices-args: introduce rte_devargs in eal Olivier Matz
2014-02-28 21:39 ` Stephen Hemminger
2014-03-01 12:02 ` Olivier MATZ
2014-03-01 12:14 ` [dpdk-dev] [PATCH v2 " Olivier Matz
2014-04-10 13:59 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 03/11] devices-args: use rte_devargs and remove old whitelist code Olivier Matz
2014-03-01 12:14 ` [dpdk-dev] [PATCH v2 " Olivier Matz
2014-04-10 14:01 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 04/11] devices-args: add a dump_devargs command in basic test application Olivier Matz
2014-04-10 14:02 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 05/11] pci: rename device_list as pci_device_list Olivier Matz
2014-04-10 14:03 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 06/11] vdev: rename eal_common_nonpci_devs.c as eal_common_vdev.c Olivier Matz
2014-04-10 14:39 ` Thomas Monjalon
2014-04-11 7:36 ` Olivier Matz [this message]
2014-04-11 11:25 ` [dpdk-dev] [PATCH v2 06/11] vdev: rename nonpci_devs as vdev Thomas Monjalon
2014-04-11 11:45 ` [dpdk-dev] [PATCH v3 " Olivier Matz
2014-04-11 12:37 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 07/11] vdev: allow external registration of virtual device drivers Olivier Matz
2014-04-10 14:55 ` Thomas Monjalon
2014-04-11 7:36 ` [dpdk-dev] [PATCH v2 07/11 1/2] vdev: new registration API Olivier Matz
2014-04-11 7:36 ` [dpdk-dev] [PATCH v2 07/11 2/2] vdev: allow external registration of virtual device drivers Olivier Matz
2014-04-11 14:31 ` Thomas Monjalon
2014-04-11 10:49 ` [dpdk-dev] [PATCH v2 07/11 1/2] vdev: new registration API Neil Horman
2014-04-11 13:11 ` Thomas Monjalon
2014-04-11 15:50 ` Neil Horman
2014-04-11 16:18 ` Thomas Monjalon
2014-04-11 17:44 ` Neil Horman
2014-04-11 20:08 ` Richardson, Bruce
2014-04-12 6:05 ` Thomas Monjalon
2014-04-12 11:03 ` Neil Horman
2014-04-12 11:23 ` Richardson, Bruce
2014-04-12 14:06 ` Neil Horman
2014-04-14 13:20 ` John W. Linville
2014-04-14 13:45 ` Thomas Monjalon
2014-04-14 13:54 ` Neil Horman
2014-04-14 14:10 ` John W. Linville
2014-04-14 14:39 ` Thomas Monjalon
2014-04-11 14:31 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 08/11] device-args: use a comma instead of semicolon to separate key/values Olivier Matz
2014-04-10 14:05 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 09/11] device-args: replace use-device eal option by pci-whitelist and vdev Olivier Matz
2014-03-01 12:14 ` [dpdk-dev] [PATCH v2 " Olivier Matz
2014-04-10 14:06 ` Thomas Monjalon
2014-03-03 17:14 ` [dpdk-dev] [PATCH " Richardson, Bruce
2014-03-04 13:09 ` Olivier MATZ
2014-03-04 13:14 ` Richardson, Bruce
2014-03-24 22:39 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 10/11] device-args: allow to provide per pci device command line arguments Olivier Matz
2014-03-01 12:14 ` [dpdk-dev] [PATCH v2 " Olivier Matz
2014-04-10 14:06 ` Thomas Monjalon
2014-02-28 17:25 ` [dpdk-dev] [PATCH 11/11] testpmd: add several dump commands, useful for debug Olivier Matz
2014-03-01 12:15 ` [dpdk-dev] [PATCH v2 " Olivier Matz
2014-04-10 14:08 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1397201793-26580-1-git-send-email-olivier.matz@6wind.com \
--to=olivier.matz@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).