From: David Marchand <david.marchand@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 7/7] pci: remove deprecated RTE_EAL_UNBIND_PORTS option
Date: Fri, 9 May 2014 15:15:59 +0200 [thread overview]
Message-ID: <1399641359-11267-8-git-send-email-david.marchand@6wind.com> (raw)
In-Reply-To: <1399641359-11267-1-git-send-email-david.marchand@6wind.com>
RTE_EAL_UNBIND_PORTS was deprecated in DPDK 1.4.0 and removed in 1.6.0, but the
code was not removed.
The bind/unbind operations should not be handled by the eal.
These operations should be either done outside of dpdk or inside the PMDs
themselves as these are their problems.
Signed-off-by: Anatoly Burakov <anatoly.burakov@intel.com>
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
lib/librte_eal/linuxapp/eal/eal_pci.c | 171 ---------------------------------
1 file changed, 171 deletions(-)
diff --git a/lib/librte_eal/linuxapp/eal/eal_pci.c b/lib/librte_eal/linuxapp/eal/eal_pci.c
index d529ced..ac2c1fe 100644
--- a/lib/librte_eal/linuxapp/eal/eal_pci.c
+++ b/lib/librte_eal/linuxapp/eal/eal_pci.c
@@ -146,155 +146,6 @@ error:
return -1;
}
-#ifdef RTE_EAL_UNBIND_PORTS
-#define PROC_MODULES "/proc/modules"
-
-#define IGB_UIO_NAME "igb_uio"
-
-#define UIO_DRV_PATH "/sys/bus/pci/drivers/%s"
-
-/* maximum time to wait that /dev/uioX appears */
-#define UIO_DEV_WAIT_TIMEOUT 3 /* seconds */
-
-/*
- * Check that a kernel module is loaded. Returns 0 on success, or if the
- * parameter is NULL, or -1 if the module is not loaded.
- */
-static int
-pci_uio_check_module(const char *module_name)
-{
- FILE *f;
- unsigned i;
- char buf[BUFSIZ];
-
- if (module_name == NULL)
- return 0;
-
- f = fopen(PROC_MODULES, "r");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open "PROC_MODULES": %s\n",
- strerror(errno));
- return -1;
- }
-
- while(fgets(buf, sizeof(buf), f) != NULL) {
-
- for (i = 0; i < sizeof(buf) && buf[i] != '\0'; i++) {
- if (isspace(buf[i]))
- buf[i] = '\0';
- }
-
- if (strncmp(buf, module_name, sizeof(buf)) == 0) {
- fclose(f);
- return 0;
- }
- }
- fclose(f);
- return -1;
-}
-
-/* bind a PCI to the kernel module driver */
-static int
-pci_bind_device(struct rte_pci_device *dev, char dr_path[])
-{
- FILE *f;
- int n;
- char buf[BUFSIZ];
- char dev_bind[PATH_MAX];
- struct rte_pci_addr *loc = &dev->addr;
-
- n = rte_snprintf(dev_bind, sizeof(dev_bind), "%s/bind", dr_path);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf device bind path\n");
- return -1;
- }
-
- f = fopen(dev_bind, "w");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open %s\n", dev_bind);
- return -1;
- }
- n = rte_snprintf(buf, sizeof(buf), PCI_PRI_FMT "\n",
- loc->domain, loc->bus, loc->devid, loc->function);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf PCI infos\n");
- fclose(f);
- return -1;
- }
- if (fwrite(buf, n, 1, f) == 0) {
- fclose(f);
- return -1;
- }
-
- fclose(f);
- return 0;
-}
-
-static int
-pci_uio_bind_device(struct rte_pci_device *dev, const char *module_name)
-{
- FILE *f;
- int n;
- char buf[BUFSIZ];
- char uio_newid[PATH_MAX];
- char uio_bind[PATH_MAX];
-
- n = rte_snprintf(uio_newid, sizeof(uio_newid), UIO_DRV_PATH "/new_id", module_name);
- if ((n < 0) || (n >= (int)sizeof(uio_newid))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf uio_newid name\n");
- return -1;
- }
-
- n = rte_snprintf(uio_bind, sizeof(uio_bind), UIO_DRV_PATH, module_name);
- if ((n < 0) || (n >= (int)sizeof(uio_bind))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf uio_bind name\n");
- return -1;
- }
-
- n = rte_snprintf(buf, sizeof(buf), "%x %x\n",
- dev->id.vendor_id, dev->id.device_id);
- if ((n < 0) || (n >= (int)sizeof(buf))) {
- RTE_LOG(ERR, EAL, "Cannot rte_snprintf vendor_id/device_id\n");
- return -1;
- }
-
- f = fopen(uio_newid, "w");
- if (f == NULL) {
- RTE_LOG(ERR, EAL, "Cannot open %s\n", uio_newid);
- return -1;
- }
- if (fwrite(buf, n, 1, f) == 0) {
- fclose(f);
- return -1;
- }
- fclose(f);
-
- pci_bind_device(dev, uio_bind);
- return 0;
-}
-
-static int
-pci_switch_module(struct rte_pci_driver *dr, struct rte_pci_device *dev,
- const char *module_name)
-{
- if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
- /* check that our driver is loaded */
- if (pci_uio_check_module(module_name) != 0)
- rte_exit(EXIT_FAILURE, "The %s module is required by the "
- "%s driver\n", module_name, dr->name);
-
- /* unbind current driver, bind ours */
- if (pci_unbind_kernel_driver(dev) < 0)
- return -1;
- if (pci_uio_bind_device(dev, module_name) < 0)
- return -1;
- }
-
- return 0;
-}
-
-#endif /* ifdef EAL_UNBIND_PORTS */
-
/* map a particular resource from a file */
static void *
pci_map_resource(void *requested_addr, const char *devname, off_t offset,
@@ -303,24 +154,10 @@ pci_map_resource(void *requested_addr, const char *devname, off_t offset,
int fd;
void *mapaddr;
-#ifdef RTE_EAL_UNBIND_PORTS
- /*
- * open devname, and mmap it: it can take some time to
- * appear, so we wait some time before returning an error
- */
- unsigned n;
- for (n = 0; n < UIO_DEV_WAIT_TIMEOUT*10; n++) {
- errno = 0;
- if ((fd = open(devname, O_RDWR)) < 0 && errno != ENOENT)
- break;
- usleep(100000);
- }
-#else
/*
* open devname, to mmap it
*/
fd = open(devname, O_RDWR);
-#endif
if (fd < 0) {
RTE_LOG(ERR, EAL, "Cannot open %s: %s\n",
devname, strerror(errno));
@@ -1002,14 +839,6 @@ rte_eal_pci_probe_one_driver(struct rte_pci_driver *dr, struct rte_pci_device *d
return 0;
}
-#ifdef RTE_EAL_UNBIND_PORTS
- if (dr->drv_flags & RTE_PCI_DRV_NEED_IGB_UIO) {
- /* unbind current driver and bind on igb_uio */
- if (pci_switch_module(dr, dev, IGB_UIO_NAME) < 0)
- return -1;
- }
-#endif
-
if (dr->drv_flags & RTE_PCI_DRV_NEED_IGB_UIO) {
/* map resources for devices that use igb_uio */
if (pci_uio_map_resource(dev) < 0)
--
1.7.10.4
next prev parent reply other threads:[~2014-05-09 13:16 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-09 13:15 [dpdk-dev] [PATCH v2 0/7] pci cleanup David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 1/7] pci: fix potential mem leaks David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 2/7] pci: align bsd implementation on linux David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 3/7] pci: remove virtio-uio workaround David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 4/7] pci: rework interrupt fd init and fix fd leak David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 5/7] pci: pci_switch_module cleanup David Marchand
2014-05-09 13:15 ` [dpdk-dev] [PATCH v2 6/7] pci: move RTE_PCI_DRV_FORCE_UNBIND handling out of #ifdef David Marchand
2014-05-09 13:15 ` David Marchand [this message]
2014-05-13 14:29 ` [dpdk-dev] [PATCH v2 0/7] pci cleanup Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1399641359-11267-8-git-send-email-david.marchand@6wind.com \
--to=david.marchand@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).