DPDK patches and discussions
 help / color / mirror / Atom feed
From: Thomas Monjalon <thomas.monjalon@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2] app/testpmd: list forwarding modes
Date: Thu, 15 May 2014 11:35:13 +0200	[thread overview]
Message-ID: <1400146513-14283-1-git-send-email-thomas.monjalon@6wind.com> (raw)
In-Reply-To: <1400087113-5270-1-git-send-email-thomas.monjalon@6wind.com>

Having a function to list forwarding modes helps to show them
in cli help and in parameters usage witout duplicating code.

Signed-off-by: Thomas Monjalon <thomas.monjalon@6wind.com>
---
 app/test-pmd/cmdline.c    | 55 ++++++++++++++++++++++++++++-------------------
 app/test-pmd/config.c     | 19 ++++++++++++++++
 app/test-pmd/parameters.c |  3 ++-
 app/test-pmd/testpmd.h    |  1 +
 4 files changed, 55 insertions(+), 23 deletions(-)

changes in v2:
- factorize also contextual help

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 7f59333..12a09d0 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -294,17 +294,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"        bit 3 - insert sctp checksum offload if set\n"
 			"    Please check the NIC datasheet for HW limits.\n\n"
 
-#ifdef RTE_LIBRTE_IEEE1588
-			"set fwd (io|mac|mac_retry|rxonly|txonly|csum|ieee1588)\n"
-			"    Set IO, MAC, MAC_RETRY, RXONLY, CSUM or TXONLY or ieee1588"
-			" packet forwarding mode.\n\n"
+			"set fwd (%s)\n"
+			"    Set packet forwarding mode.\n\n"
 
-#else
-			"set fwd (io|mac|mac_retry|rxonly|txonly|csum)\n"
-			"    Set IO, MAC, MAC_RETRY, RXONLY, CSUM or TXONLY packet"
-			" forwarding mode.\n\n"
-
-#endif
 			"mac_addr add (port_id) (XX:XX:XX:XX:XX:XX)\n"
 			"    Add a MAC address on port_id.\n\n"
 
@@ -398,6 +390,7 @@ static void cmd_help_long_parsed(void *parsed_result,
 			" using the lowest port on the NIC.\n\n"
 #endif
 
+			, list_pkt_forwarding_modes()
 		);
 	}
 
@@ -2688,22 +2681,12 @@ cmdline_parse_token_string_t cmd_setfwd_fwd =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_mode_result, fwd, "fwd");
 cmdline_parse_token_string_t cmd_setfwd_mode =
 	TOKEN_STRING_INITIALIZER(struct cmd_set_fwd_mode_result, mode,
-#ifdef RTE_LIBRTE_IEEE1588
-				 "io#mac#mac_retry#rxonly#txonly#csum#ieee1588");
-#else
-				 "io#mac#mac_retry#rxonly#txonly#csum");
-#endif
+		"" /* defined at init */);
 
 cmdline_parse_inst_t cmd_set_fwd_mode = {
 	.f = cmd_set_fwd_mode_parsed,
 	.data = NULL,
-#ifdef RTE_LIBRTE_IEEE1588
-	.help_str = "set fwd io|mac|mac_retry|rxonly|txonly|csum|ieee1588 - set IO, MAC,"
-	" MAC_RETRY, RXONLY, TXONLY, CSUM or IEEE1588 packet forwarding mode",
-#else
-	.help_str = "set fwd io|mac|mac_retry|rxonly|txonly|csum - set IO, MAC,"
-	" MAC_RETRY, RXONLY, CSUM or TXONLY packet forwarding mode",
-#endif
+	.help_str = NULL, /* defined at init */
 	.tokens = {
 		(void *)&cmd_setfwd_set,
 		(void *)&cmd_setfwd_fwd,
@@ -2712,6 +2695,26 @@ cmdline_parse_inst_t cmd_set_fwd_mode = {
 	},
 };
 
+static void cmd_set_fwd_mode_init(cmdline_parse_inst_t *cmd)
+{
+	char *modes, *c;
+	static char token[128];
+	static char help[256];
+
+	modes = list_pkt_forwarding_modes();
+	rte_snprintf(help, sizeof help, "set fwd %s - "
+		"set packet forwarding mode", modes);
+	cmd->help_str = help;
+
+	/* string token separator is # */
+	for (c = token; *modes != '\0'; modes++)
+		if (*modes == '|')
+			*c++ = '#';
+		else
+			*c++ = *modes;
+	((cmdline_parse_token_string_t *)cmd->tokens[2])->string_data.str = token;
+}
+
 /* *** SET BURST TX DELAY TIME RETRY NUMBER *** */
 struct cmd_set_burst_tx_retry_result {
 	cmdline_fixed_string_t set;
@@ -5197,6 +5200,14 @@ void
 prompt(void)
 {
 	struct cmdline *cl;
+	unsigned i = 0;
+	cmdline_parse_inst_t *cmd;
+
+	/* initialize non-constant commands */
+	while ((cmd = main_ctx[i++]) != NULL) {
+		if (cmd->f == cmd_set_fwd_mode_parsed)
+			cmd_set_fwd_mode_init(cmd);
+	}
 
 	cl = cmdline_stdin_new(main_ctx, "testpmd> ");
 	if (cl == NULL) {
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index d0e21b7..2e4b7a5 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -1231,6 +1231,25 @@ set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs)
 	tx_pkt_nb_segs = (uint8_t) nb_segs;
 }
 
+char*
+list_pkt_forwarding_modes(void)
+{
+	static char modes[128] = "";
+	const char *separator = "|";
+	struct fwd_engine *fwd_eng;
+	unsigned i = 0;
+
+	if (strlen (modes) == 0) {
+		while ((fwd_eng = fwd_engines[i++]) != NULL) {
+			strcat(modes, fwd_eng->fwd_mode_name);
+			strcat(modes, separator);
+		}
+		modes[strlen(modes) - strlen(separator)] = '\0';
+	}
+
+	return modes;
+}
+
 void
 set_pkt_forwarding_mode(const char *fwd_mode_name)
 {
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 67081d7..8a3ce2c 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -158,7 +158,8 @@ usage(char* progname)
 	printf("  --disable-rss: disable rss.\n");
 	printf("  --port-topology=N: set port topology (N: paired (default) or "
 	       "chained).\n");
-	printf("  --forward-mode=N: set forwarding mode.\n");
+	printf("  --forward-mode=N: set forwarding mode (N: %s).\n",
+	       list_pkt_forwarding_modes());
 	printf("  --rss-ip: set RSS functions to IPv4/IPv6 only .\n");
 	printf("  --rss-udp: set RSS functions to IPv4/IPv6 + UDP.\n");
 	printf("  --rxq=N: set the number of RX queues per port to N.\n");
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 52d3543..0e4a35e 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -491,6 +491,7 @@ void tx_cksum_set(portid_t port_id, uint8_t cksum_mask);
 void set_verbose_level(uint16_t vb_level);
 void set_tx_pkt_segments(unsigned *seg_lengths, unsigned nb_segs);
 void set_nb_pkt_per_burst(uint16_t pkt_burst);
+char *list_pkt_forwarding_modes(void);
 void set_pkt_forwarding_mode(const char *fwd_mode);
 void start_packet_forwarding(int with_tx_first);
 void stop_packet_forwarding(void);
-- 
1.9.2

  reply	other threads:[~2014-05-15  9:35 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-04-03 17:30 [dpdk-dev] [PATCH 0/6] Extensions to test-pmd Cyril Chemparathy
2014-04-03 17:30 ` [dpdk-dev] [PATCH 1/6] test-pmd: add support for single port loopback topology Cyril Chemparathy
2014-04-03 17:30 ` [dpdk-dev] [PATCH 2/6] test-pmd: add support for auto-start when interactive Cyril Chemparathy
2014-04-03 17:30 ` [dpdk-dev] [PATCH 3/6] test-pmd: allow command line selection of forwarding mode Cyril Chemparathy
2014-04-04  8:21   ` Richardson, Bruce
2014-05-14 17:05     ` [dpdk-dev] [PATCH] app/testpmd: list forwarding modes Thomas Monjalon
2014-05-15  9:35       ` Thomas Monjalon [this message]
2014-05-15 16:08         ` [dpdk-dev] [PATCH v3] app/testpmd: list forwarding engines Thomas Monjalon
2014-05-16  7:21           ` Ivan Boule
2014-05-16 14:24             ` Thomas Monjalon
2014-04-03 17:30 ` [dpdk-dev] [PATCH 4/6] test-pmd: allow txpkts to be setup via command line Cyril Chemparathy
2014-04-03 17:30 ` [dpdk-dev] [PATCH 5/6] test-pmd: add mac swap forwarding mode Cyril Chemparathy
2014-04-03 17:30 ` [dpdk-dev] [PATCH 6/6] test-pmd: add flowgen forwarding engine Cyril Chemparathy
2014-05-16 14:22 ` [dpdk-dev] [PATCH 0/6] Extensions to test-pmd Thomas Monjalon
2014-05-16 16:55   ` Cyril Chemparathy
2014-05-19  9:31     ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1400146513-14283-1-git-send-email-thomas.monjalon@6wind.com \
    --to=thomas.monjalon@6wind.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).