From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 1/4]ethdev: add ethdev APIs for NIC filters of generic filter
Date: Sat, 24 May 2014 09:37:19 +0800 [thread overview]
Message-ID: <1400895442-32433-2-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1400895442-32433-1-git-send-email-jingjing.wu@intel.com>
This patch adds APIs for NIC filters list below:
ethertype filter, syn filter, 2tuple filter, flex filter, 5tuple filter
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
---
lib/librte_ether/rte_ethdev.c | 281 ++++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.h | 421 +++++++++++++++++++++++++++++++++++++++++-
2 files changed, 701 insertions(+), 1 deletion(-)
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index a5727dd..afd4fe8 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -41,6 +41,7 @@
#include <errno.h>
#include <stdint.h>
#include <inttypes.h>
+#include <netinet/in.h>
#include <rte_byteorder.h>
#include <rte_log.h>
@@ -2335,3 +2336,283 @@ rte_eth_dev_bypass_wd_reset(uint8_t port_id)
return 0;
}
#endif
+
+int
+rte_eth_dev_add_syn_filter(uint8_t port_id, uint8_t high_pri,
+ uint8_t rx_queue)
+{
+ struct rte_eth_dev *dev;
+ struct rte_syn_filter filter;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ filter.enable = 1;
+ filter.hig_pri = high_pri;
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_syn_filter, -ENOTSUP);
+ return (*dev->dev_ops->set_syn_filter)(dev, &filter, rx_queue);
+}
+
+int
+rte_eth_dev_remove_syn_filter(uint8_t port_id)
+{
+ struct rte_eth_dev *dev;
+ struct rte_syn_filter filter;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ filter.enable = 0;
+ filter.hig_pri = 0;
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->set_syn_filter, -ENOTSUP);
+ return (*dev->dev_ops->set_syn_filter)(dev, &filter, 0);
+}
+
+int
+rte_eth_dev_get_syn_filter(uint8_t port_id,
+ struct rte_syn_filter *filter, uint8_t *rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (filter == NULL || rx_queue == NULL)
+ return (-EINVAL);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_syn_filter, -ENOTSUP);
+ return (*dev->dev_ops->get_syn_filter)(dev, filter, rx_queue);
+}
+
+int
+rte_eth_dev_add_ethertype_filter(uint8_t port_id, uint16_t index,
+ struct rte_ethertype_filter *filter, uint8_t rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+ if (filter->ethertype == ETHER_TYPE_IPv4 ||
+ filter->ethertype == ETHER_TYPE_IPv6){
+ PMD_DEBUG_TRACE("IP and IPv6 are not supported"
+ " in ethertype filter\n");
+ return (-EINVAL);
+ }
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_ethertype_filter, -ENOTSUP);
+ return (*dev->dev_ops->add_ethertype_filter)(dev, index,
+ filter, rx_queue);
+}
+
+int
+rte_eth_dev_remove_ethertype_filter(uint8_t port_id, uint16_t index)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_ethertype_filter, -ENOTSUP);
+ return (*dev->dev_ops->remove_ethertype_filter)(dev, index);
+}
+
+int
+rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
+ struct rte_ethertype_filter *filter, uint8_t *rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (filter == NULL || rx_queue == NULL)
+ return (-EINVAL);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_ethertype_filter, -ENOTSUP);
+ return (*dev->dev_ops->get_ethertype_filter)(dev, index,
+ filter, rx_queue);
+}
+
+int
+rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_2tuple_filter *filter, uint8_t rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+ if (filter->protocol != IPPROTO_TCP &&
+ filter->tcp_flags != 0){
+ PMD_DEBUG_TRACE("tcp flags is 0x%x, but the protocol value"
+ " is not TCP\n",
+ filter->tcp_flags);
+ return (-EINVAL);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_2tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->add_2tuple_filter)(dev, index, filter, rx_queue);
+}
+
+int
+rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_2tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->remove_2tuple_filter)(dev, index);
+}
+
+int
+rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_2tuple_filter *filter, uint8_t *rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (filter == NULL || rx_queue == NULL)
+ return (-EINVAL);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_2tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->get_2tuple_filter)(dev, index, filter, rx_queue);
+}
+
+int
+rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_5tuple_filter *filter, uint8_t rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ if (filter->protocol != IPPROTO_TCP &&
+ filter->tcp_flags != 0){
+ PMD_DEBUG_TRACE("tcp flags is 0x%x, but the protocol value"
+ " is not TCP\n",
+ filter->tcp_flags);
+ return (-EINVAL);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_5tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->add_5tuple_filter)(dev, index, filter, rx_queue);
+}
+
+int
+rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_5tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->remove_5tuple_filter)(dev, index);
+}
+
+int
+rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_5tuple_filter *filter, uint8_t *rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (filter == NULL || rx_queue == NULL)
+ return (-EINVAL);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_5tuple_filter, -ENOTSUP);
+ return (*dev->dev_ops->get_5tuple_filter)(dev, index, filter,
+ rx_queue);
+}
+
+int
+rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index,
+ struct rte_flex_filter *filter, uint8_t rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->add_flex_filter, -ENOTSUP);
+ return (*dev->dev_ops->add_flex_filter)(dev, index, filter, rx_queue);
+}
+
+int
+rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->remove_flex_filter, -ENOTSUP);
+ return (*dev->dev_ops->remove_flex_filter)(dev, index);
+}
+
+int
+rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
+ struct rte_flex_filter *filter, uint8_t *rx_queue)
+{
+ struct rte_eth_dev *dev;
+
+ if (filter == NULL || rx_queue == NULL)
+ return (-EINVAL);
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return (-ENODEV);
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->get_flex_filter, -ENOTSUP);
+ return (*dev->dev_ops->get_flex_filter)(dev, index, filter,
+ rx_queue);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index d5ea46b..21257b2 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -808,6 +808,71 @@ struct rte_eth_dev_callback;
/** @internal Structure to keep track of registered callbacks */
TAILQ_HEAD(rte_eth_dev_cb_list, rte_eth_dev_callback);
+#define TCP_UGR_FLAG 0x20
+#define TCP_ACK_FLAG 0x10
+#define TCP_PSH_FLAG 0x08
+#define TCP_RST_FLAG 0x04
+#define TCP_SYN_FLAG 0x02
+#define TCP_FIN_FLAG 0x01
+#define TCP_FLAG_ALL 0x3F
+
+/**
+ * A structure used to define an ethertype filter.
+ */
+struct rte_ethertype_filter {
+ uint16_t ethertype; /**<little endian*/
+ uint8_t priority_en; /**<compare priority enable*/
+ uint8_t priority;
+};
+
+/**
+ * A structure used to define an syn filter.
+ */
+struct rte_syn_filter {
+ uint8_t enable; /**<1 means enable, 0 means disable*/
+ uint8_t hig_pri; /**< 1 means higher pri than 2tuple,5tupe, and flex filter, 0 means lower pri*/
+};
+
+/**
+ * A structure used to define a 2tuple filter.
+ */
+struct rte_2tuple_filter {
+ uint16_t dst_port; /**<big endian*/
+ uint8_t protocol;
+ uint8_t tcp_flags;
+ uint16_t priority; /**< used when more than one filter matches */
+ uint8_t dst_port_mask : 1, /**<if mask is 1b, means not compare*/
+ protocol_mask : 1;
+};
+
+/**
+ * A structure used to define a flex filter.
+ */
+struct rte_flex_filter { /** for E1000 filters*/
+ uint16_t len;
+ uint32_t dwords[32]; /**<flex bytes in big endian*/
+ uint8_t mask[16]; /**<if mask bit is 1b, means compare corresponding byte in dwords*/
+ uint8_t priority;
+};
+
+/**
+ * A structure used to define a 5tuple filter.
+ */
+struct rte_5tuple_filter {
+ uint32_t dst_ip; /**<destination IP address in big endian*/
+ uint32_t src_ip; /**<source IP address in big endian*/
+ uint16_t dst_port; /**<destination port in big endian*/
+ uint16_t src_port; /**<source Port big endian*/
+ uint8_t protocol;
+ uint8_t tcp_flags;
+ uint16_t priority; /**<seven evels (001b-111b), 111b is highest, used when more than one filter matches */
+ uint8_t dst_ip_mask : 1, /**<if mask is 1b, do not compare dst ip*/
+ src_ip_mask : 1, /**<if mask is 1b, do not compare src ip*/
+ dst_port_mask : 1, /**<if mask is 1b, do not compare dst port*/
+ src_port_mask : 1, /**<if mask is 1b, do not compare src port*/
+ protocol_mask : 1; /**<if mask is 1b, do not compare protocol*/
+};
+
/*
* Definitions of all functions exported by an Ethernet driver through the
* the generic structure of type *eth_dev_ops* supplied in the *rte_eth_dev*
@@ -1076,6 +1141,69 @@ typedef int32_t (*bypass_ver_show_t)(struct rte_eth_dev *dev, uint32_t *ver);
typedef int32_t (*bypass_wd_reset_t)(struct rte_eth_dev *dev);
#endif
+typedef int (*eth_set_syn_filter_t)(struct rte_eth_dev *dev,
+ struct rte_syn_filter *filter, uint8_t rx_queue);
+/**< @internal Set syn filter rule on an Ethernet device */
+
+typedef int (*eth_get_syn_filter_t)(struct rte_eth_dev *dev,
+ struct rte_syn_filter *filter, uint8_t *rx_queue);
+/**< @internal Get syn filter rule on an Ethernet device */
+
+typedef int (*eth_add_ethertype_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_ethertype_filter *filter,
+ uint8_t rx_queue);
+/**< @internal Setup a new ethertype filter rule on an Ethernet device */
+
+typedef int (*eth_remove_ethertype_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index);
+/**< @internal Remove an ethertype filter rule on an Ethernet device */
+
+typedef int (*eth_get_ethertype_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_ethertype_filter *filter,
+ uint8_t *rx_queue);
+/**< @internal Get an ethertype filter rule on an Ethernet device */
+
+typedef int (*eth_add_2tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_2tuple_filter *filter,
+ uint8_t rx_queue);
+/**< @internal Setup a new 2tuple filter rule on an Ethernet device */
+
+typedef int (*eth_remove_2tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index);
+/**< @internal Remove a 2tuple filter rule on an Ethernet device */
+
+typedef int (*eth_get_2tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_2tuple_filter *filter,
+ uint8_t *rx_queue);
+/**< @internal Get a 2tuple filter rule on an Ethernet device */
+
+typedef int (*eth_add_5tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_5tuple_filter *filter,
+ uint8_t rx_queue);
+/**< @internal Setup a new 5tuple filter rule on an Ethernet device */
+
+typedef int (*eth_remove_5tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index);
+/**< @internal Remove a 5tuple filter rule on an Ethernet device */
+
+typedef int (*eth_get_5tuple_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_5tuple_filter *filter,
+ uint8_t *rx_queue);
+/**< @internal Get a 5tuple filter rule on an Ethernet device */
+
+typedef int (*eth_add_flex_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_flex_filter *filter,
+ uint8_t rx_queue);
+/**< @internal Setup a new flex filter rule on an Ethernet device */
+
+typedef int (*eth_remove_flex_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index);
+/**< @internal Remove a flex filter rule on an Ethernet device */
+
+typedef int (*eth_get_flex_filter_t)(struct rte_eth_dev *dev,
+ uint16_t index, struct rte_flex_filter *filter,
+ uint8_t *rx_queue);
+/**< @internal Get a flex filter rule on an Ethernet device */
/**
* @internal A structure containing the functions exported by an Ethernet driver.
@@ -1152,7 +1280,20 @@ struct eth_dev_ops {
bypass_ver_show_t bypass_ver_show;
bypass_wd_reset_t bypass_wd_reset;
#endif
-
+ eth_set_syn_filter_t set_syn_filter; /**< set syn filter. */
+ eth_get_syn_filter_t get_syn_filter; /**< get syn filter. */
+ eth_add_ethertype_filter_t add_ethertype_filter; /**< add ethertype filter. */
+ eth_remove_ethertype_filter_t remove_ethertype_filter; /**< remove ethertype filter*/
+ eth_get_ethertype_filter_t get_ethertype_filter; /**< get ethertype filter*/
+ eth_add_2tuple_filter_t add_2tuple_filter; /**<add 2tuple filter */
+ eth_remove_2tuple_filter_t remove_2tuple_filter; /**< remove 2tuple filter*/
+ eth_get_2tuple_filter_t get_2tuple_filter; /**< get 2tuple filter*/
+ eth_add_5tuple_filter_t add_5tuple_filter; /**< add 5tuple filter*/
+ eth_remove_5tuple_filter_t remove_5tuple_filter; /**< remove 5tuple filter*/
+ eth_get_5tuple_filter_t get_5tuple_filter; /**< get 5tuple filter*/
+ eth_add_flex_filter_t add_flex_filter; /**< add flex filter*/
+ eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter*/
+ eth_get_flex_filter_t get_flex_filter; /**< get flex filter*/
};
/**
@@ -2725,6 +2866,284 @@ int rte_eth_dev_bypass_wd_timeout_show(uint8_t port, uint32_t *wd_timeout);
*/
int rte_eth_dev_bypass_wd_reset(uint8_t port);
+/**
+ * add syn filter
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param rx_queue
+ * The index of RX queue where to store RX packets matching the syn filter.
+ * @param high_pri
+ * 1 means higher pri than 2tuple,5tupe, and flex filter, 0 means lower
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_add_syn_filter(uint8_t port_id, uint8_t high_pri,
+ uint8_t rx_queue);
+
+/**
+ * remove syn filter
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_remove_syn_filter(uint8_t port_id);
+
+/**
+ * get syn filter
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter
+ * The pointer to the structure describing the syn filter.
+ * @param rx_queue
+ * the point of a int type to get the queue of syn filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-EINVAL) if bad parameter.
+ */
+int rte_eth_dev_get_syn_filter(uint8_t port_id,
+ struct rte_syn_filter *filter, uint8_t *rx_queue);
+
+/**
+ * Add a new ethertype filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of ethertype filter.
+ * @param filter
+ * The pointer to the structure describing the ethertype filter rule.
+ * The *rte_ethertype_filter* structure includes the values of the different
+ * fields to match: ethertype and priority in vlan tag.
+ * priority in vlan tag is not supported for E1000 dev.
+ * @param rx_queue
+ * The index of the RX queue where to store RX packets matching the added
+ * ethertype filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support ethertype filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_add_ethertype_filter(uint8_t port_id, uint16_t index,
+ struct rte_ethertype_filter *filter, uint8_t rx_queue);
+/**
+ * remove an ethertype filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of ethertype filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support ethertype filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_remove_ethertype_filter(uint8_t port_id,
+ uint16_t index);
+
+/**
+ * Get an ethertype filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter
+ * A pointer to a structure of type *rte_ethertype_filter* to be filled with
+ * the information of the Ethertype filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support ethertype filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ * - (-ENOENT) if no enabled filter in this index.
+ */
+
+int rte_eth_dev_get_ethertype_filter(uint8_t port_id, uint16_t index,
+ struct rte_ethertype_filter *filter, uint8_t *rx_queue);
+/**
+ * Add a new 2tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 2tuple filter.
+ * @param filter
+ * The pointer to the structure describing the 2tuple filter rule.
+ * The *rte_2tuple_filter* structure includes the values of the different
+ * fields to match: protocol, dst_port and
+ * tcp_flags if the protocol is tcp type.
+ * @param rx_queue
+ * The index of the RX queue where to store RX packets matching the added
+ * 2tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+
+int rte_eth_dev_add_2tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_2tuple_filter *filter, uint8_t rx_queue);
+/**
+ * remove a 2tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 2tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_remove_2tuple_filter(uint8_t port_id, uint16_t index);
+
+/**
+ * Get an 2tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 2tuple filter.
+ * @param filter
+ * A pointer to a structure of type *rte_2tuple_filter* to be filled with
+ * the information of the 2tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 2tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ * - (-ENOENT) if no enabled filter in this index.
+ */
+int rte_eth_dev_get_2tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_2tuple_filter *filter, uint8_t *rx_queue);
+
+/**
+ * Add a new 5tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 5tuple filter.
+ * @param filter
+ * The pointer to the structure describing the 5tuple filter rule.
+ * The *rte_5tuple_filter* structure includes the values of the different fields
+ * fields to match: dst src IP, dst src port, protocol and relative masks
+ * @param rx_queue
+ * The index of the RX queue where to store RX packets matching the added
+ * 5tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_add_5tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_5tuple_filter *filter, uint8_t rx_queue);
+
+/**
+ * remove a 5tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 5tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_remove_5tuple_filter(uint8_t port_id, uint16_t index);
+
+/**
+ * Get an 5tuple filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of 5tuple filter.
+ * @param filter
+ * A pointer to a structure of type *rte_5tuple_filter* to be filled with
+ * the information of the 5tuple filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support 5tuple filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_get_5tuple_filter(uint8_t port_id, uint16_t index,
+ struct rte_5tuple_filter *filter, uint8_t *rx_queue);
+
+/**
+ * Add a new flex filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of flex filter.
+ * @param filter
+ * The pointer to the structure describing the flex filter rule.
+ * The *rte_flex_filter* structure includes the values of the different fields
+ * to match: the dwords (first len bytes of packet ) and relative masks.
+ * @param rx_queue
+ * The index of the RX queue where to store RX packets matching the added
+ * flex filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flex filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ * - (-ENOENT) if no enabled filter in this index.
+ */
+int rte_eth_dev_add_flex_filter(uint8_t port_id, uint16_t index,
+ struct rte_flex_filter *filter, uint8_t rx_queue);
+/**
+ * remove a flex filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of flex filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flex filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ */
+int rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index);
+
+/**
+ * Get an flex filter rule on an Ethernet device.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param index
+ * The identifier of flex filter.
+ * @param filter
+ * A pointer to a structure of type *rte_flex_filter* to be filled with
+ * the information of the flex filter.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support flex filter.
+ * - (-ENODEV) if *port_id* invalid.
+ * - (-EINVAL) if the filter information is not correct.
+ * - (-ENOENT) if no enabled filter in this index.
+ */
+
+int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
+ struct rte_flex_filter *filter, uint8_t *rx_queue);
+
#ifdef __cplusplus
}
#endif
--
1.8.1.4
next prev parent reply other threads:[~2014-05-24 1:37 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-05-24 1:37 [dpdk-dev] [PATCH v2 0/4] NIC filters support for " Jingjing Wu
2014-05-24 1:37 ` Jingjing Wu [this message]
2014-05-27 7:57 ` [dpdk-dev] [PATCH v2 1/4]ethdev: add ethdev APIs for NIC filters of " Ming, LiX
2014-05-27 9:18 ` Thomas Monjalon
2014-05-24 1:37 ` [dpdk-dev] [PATCH v2 2/4]e1000: add igb NIC filters of generic filter feature Jingjing Wu
2014-05-27 7:59 ` Ming, LiX
2014-05-24 1:37 ` [dpdk-dev] [PATCH v2 3/4]ixgbe: add ixgbe " Jingjing Wu
2014-05-27 8:00 ` Ming, LiX
2014-05-24 1:37 ` [dpdk-dev] [PATCH v2 4/4]app/test-pmd: add commands in testpmd for NIC filters Jingjing Wu
2014-05-27 8:00 ` Ming, LiX
2014-05-27 23:21 ` [dpdk-dev] [PATCH v2 0/4] NIC filters support for generic filter Thomas Monjalon
2014-05-28 0:53 ` Wu, Jingjing
2014-05-28 1:12 ` Wu, Jingjing
2014-06-11 15:45 ` Thomas Monjalon
2014-06-12 8:08 ` Wu, Jingjing
2014-06-12 15:36 ` Thomas Monjalon
2014-06-13 11:51 ` Vladimir Medvedkin
2014-06-13 14:12 ` Wu, Jingjing
2014-06-13 16:19 ` Vladimir Medvedkin
2014-06-14 1:00 ` Wu, Jingjing
2014-06-14 9:00 ` Vladimir Medvedkin
2014-06-04 4:16 ` Cao, Waterman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1400895442-32433-2-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).