DPDK patches and discussions
 help / color / mirror / Atom feed
From: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [v2 03/23] Packet Framework librte_port: Port API
Date: Wed,  4 Jun 2014 19:08:19 +0100	[thread overview]
Message-ID: <1401905319-8882-4-git-send-email-cristian.dumitrescu@intel.com> (raw)
In-Reply-To: <1401905319-8882-1-git-send-email-cristian.dumitrescu@intel.com>

This file defines the port operations that have to be implemented by Packet Framework ports.

Signed-off-by: Cristian Dumitrescu <cristian.dumitrescu@intel.com>
---
 lib/librte_eal/common/include/rte_log.h |    1 +
 lib/librte_port/rte_port.h              |  190 +++++++++++++++++++++++++++++++
 2 files changed, 191 insertions(+), 0 deletions(-)
 create mode 100644 lib/librte_port/rte_port.h

diff --git a/lib/librte_eal/common/include/rte_log.h b/lib/librte_eal/common/include/rte_log.h
index 3d44ded..490dbc9 100644
--- a/lib/librte_eal/common/include/rte_log.h
+++ b/lib/librte_eal/common/include/rte_log.h
@@ -74,6 +74,7 @@ extern struct rte_logs rte_logs;
 #define RTE_LOGTYPE_POWER   0x00000400 /**< Log related to power. */
 #define RTE_LOGTYPE_METER   0x00000800 /**< Log related to QoS meter. */
 #define RTE_LOGTYPE_SCHED   0x00001000 /**< Log related to QoS port scheduler. */
+#define RTE_LOGTYPE_PORT    0x00002000 /**< Log related to port. */
 
 /* these log types can be used in an application */
 #define RTE_LOGTYPE_USER1   0x01000000 /**< User-defined log type 1. */
diff --git a/lib/librte_port/rte_port.h b/lib/librte_port/rte_port.h
new file mode 100644
index 0000000..0934b00
--- /dev/null
+++ b/lib/librte_port/rte_port.h
@@ -0,0 +1,190 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef __INCLUDE_RTE_PORT_H__
+#define __INCLUDE_RTE_PORT_H__
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @file
+ * RTE Port
+ *
+ * This tool is part of the Intel DPDK Packet Framework tool suite and provides
+ * a standard interface to implement different types of packet ports.
+ *
+ ***/
+
+#include <stdint.h>
+#include <rte_mbuf.h>
+
+/*
+ * Port IN
+ *
+ */
+/** Maximum number of packets read from any input port in a single burst.
+Cannot be changed. */
+#define RTE_PORT_IN_BURST_SIZE_MAX                         64
+
+/**
+ * Input port create
+ *
+ * @param params
+ *   Parameters for input port creation
+ * @param socket_id
+ *   CPU socket ID (e.g. for memory allocation purpose)
+ * @return
+ *   Handle to input port instance
+ */
+typedef void* (*rte_port_in_op_create)(void *params, int socket_id);
+
+/**
+ * Input port free
+ *
+ * @param port
+ *   Handle to input port instance
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_in_op_free)(void *port);
+
+/**
+ * Input port packet burst RX
+ *
+ * @param port
+ *   Handle to input port instance
+ * @param pkts
+ *   Burst of input packets
+ * @param n_pkts
+ *   Number of packets in the input burst
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_in_op_rx)(
+	void *port,
+	struct rte_mbuf **pkts,
+	uint32_t n_pkts);
+
+/** Input port interface defining the input port operation */
+struct rte_port_in_ops {
+	rte_port_in_op_create f_create; /**< Create */
+	rte_port_in_op_free f_free;     /**< Free */
+	rte_port_in_op_rx f_rx;         /**< Packet RX (packet burst) */
+};
+
+/*
+ * Port OUT
+ *
+ */
+/**
+ * Output port create
+ *
+ * @param params
+ *   Parameters for output port creation
+ * @param socket_id
+ *   CPU socket ID (e.g. for memory allocation purpose)
+ * @return
+ *   Handle to output port instance
+ */
+typedef void* (*rte_port_out_op_create)(void *params, int socket_id);
+
+/**
+ * Output port free
+ *
+ * @param port
+ *   Handle to output port instance
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_out_op_free)(void *port);
+
+/**
+ * Output port single packet TX
+ *
+ * @param port
+ *   Handle to output port instance
+ * @param pkt
+ *   Input packet
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_out_op_tx)(
+	void *port,
+	struct rte_mbuf *pkt);
+
+/**
+ * Output port packet burst TX
+ *
+ * @param port
+ *   Handle to output port instance
+ * @param pkts
+ *   Burst of input packets specified as array of up to 64 pointers to struct
+ *   rte_mbuf
+ * @param pkts_mask
+ *   64-bit bitmask specifying which packets in the input burst are valid. When
+ *   pkts_mask bit n is set, then element n of pkts array is pointing to a
+ *   valid packet. Otherwise, element n of pkts array will not be accessed.
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_out_op_tx_bulk)(
+	void *port,
+	struct rte_mbuf **pkt,
+	uint64_t pkts_mask);
+
+/**
+ * Output port free
+ *
+ * @param port
+ *   Handle to output port instance
+ * @return
+ *   0 on success, error code otherwise
+ */
+typedef int (*rte_port_out_op_flush)(void *port);
+
+/** Output port interface defining the output port operation */
+struct rte_port_out_ops {
+	rte_port_out_op_create f_create;   /**< Create */
+	rte_port_out_op_free f_free;       /**< Free */
+	rte_port_out_op_tx f_tx;           /**< Packet TX (single packet) */
+	rte_port_out_op_tx_bulk f_tx_bulk; /**< Packet TX (packet burst) */
+	rte_port_out_op_flush f_flush;     /**< Flush */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
-- 
1.7.7.6

  parent reply	other threads:[~2014-06-04 18:08 UTC|newest]

Thread overview: 36+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-04 18:08 [dpdk-dev] [v2 00/23] Packet Framework Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 01/23] librte_lpm: rule_is_present Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 02/23] mbuf: meta-data Cristian Dumitrescu
2014-06-04 18:08 ` Cristian Dumitrescu [this message]
2014-06-04 18:08 ` [dpdk-dev] [v2 04/23] Packet Framework librte_port: ethdev ports Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 05/23] Packet Framework librte_port: ring ports Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 06/23] Packet Framework librte_port: IPv4 frag port Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 07/23] Packet Framework librte_port: IPv4 reassembly Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 08/23] Packet Framework librte_port: hierarchical scheduler port Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 09/23] Packet Framework librte_port: Source/Sink ports Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 10/23] Packet Framework librte_port: Build infrastructure Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 11/23] Packet Framework librte_table: Table API Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 12/23] Packet Framework librte_table: LPM IPv4 table Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 13/23] Packet Framework librte_table: LPM IPv6 table Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 14/23] Packet Framework librte_table: ACL table Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 15/23] Packet Framework librte_table: Hash tables Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 16/23] Packet Framework librte_table: array table Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 17/23] Packet Framework librte_table: Stub table Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 18/23] Packet Framework librte_table: Build infrastructure Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 19/23] Packet Framework librte_pipeline: Pipeline Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 20/23] librte_cfgfile: interpret config files Cristian Dumitrescu
2014-10-16 16:46   ` Thomas Monjalon
2014-10-17 18:16     ` Dumitrescu, Cristian
2014-10-17 18:50       ` Thomas Monjalon
2014-06-04 18:08 ` [dpdk-dev] [v2 21/23] Packet Framework performance application Cristian Dumitrescu
2014-06-04 18:08 ` [dpdk-dev] [v2 22/23] Packet Framework IPv4 pipeline sample app Cristian Dumitrescu
2014-06-09  9:11   ` Olivier MATZ
2014-06-09 10:49     ` Dumitrescu, Cristian
2014-06-09 12:13       ` Olivier MATZ
2014-06-09 13:25         ` Dumitrescu, Cristian
2014-06-09 15:51           ` Olivier MATZ
2014-06-04 18:08 ` [dpdk-dev] [v2 23/23] Packet Framework unit tests Cristian Dumitrescu
2014-06-05 11:01 ` [dpdk-dev] [v2 00/23] Packet Framework De Lara Guarch, Pablo
2014-06-05 11:43 ` Cao, Waterman
2014-06-05 14:40 ` Ivan Boule
2014-06-17  1:27   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1401905319-8882-4-git-send-email-cristian.dumitrescu@intel.com \
    --to=cristian.dumitrescu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).