[dpdk-dev] [PATCH v2 12/27] config: add configurations for i40e

[Helin Zhang <helin.zhang@intel.com>]

configurations for i40e have been added in both common_bsdapp
and common_linuxapp.

Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
---
 config/common_bsdapp   | 20 ++++++++++++++++++++
 config/common_linuxapp | 20 ++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/config/common_bsdapp b/config/common_bsdapp
index 2cc7b80..5e17d46 100644
--- a/config/common_bsdapp
+++ b/config/common_bsdapp
@@ -165,6 +165,26 @@ CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
 CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n
 
 #
+# Compile burst-oriented I40E PMD driver
+#
+# CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL can be 0 to 8160 us,
+# otherwise a default value will be used instead.
+# The interval will be aligned to 2, due to the hardware restriction.
+#
+CONFIG_RTE_LIBRTE_I40E_PMD=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=y
+CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC=y
+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=n
+CONFIG_RTE_LIBRTE_I40E_ALLOW_UNSUPPORTED_SFP=y
+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
+
+#
 # Compile burst-oriented VIRTIO PMD driver
 #
 CONFIG_RTE_LIBRTE_VIRTIO_PMD=n
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 62619c6..da20011 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -179,6 +179,26 @@ CONFIG_RTE_LIBRTE_IXGBE_RX_ALLOW_BULK_ALLOC=y
 CONFIG_RTE_LIBRTE_IXGBE_ALLOW_UNSUPPORTED_SFP=n
 
 #
+# Compile burst-oriented I40E PMD driver
+#
+# CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL can be 0 to 8160 us,
+# otherwise a default value will be used instead.
+# The interval will be aligned to 2, due to the hardware restriction.
+#
+CONFIG_RTE_LIBRTE_I40E_PMD=y
+CONFIG_RTE_LIBRTE_I40E_DEBUG_INIT=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_RX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_TX_FREE=n
+CONFIG_RTE_LIBRTE_I40E_DEBUG_DRIVER=n
+CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC=n
+CONFIG_RTE_LIBRTE_I40E_RX_ALLOW_BULK_ALLOC=y
+CONFIG_RTE_LIBRTE_I40E_ALLOW_UNSUPPORTED_SFP=n
+CONFIG_RTE_LIBRTE_I40E_16BYTE_RX_DESC=n
+CONFIG_RTE_LIBRTE_I40E_QUEUE_NUM_PER_VF=4
+CONFIG_RTE_LIBRTE_I40E_ITR_INTERVAL=-1
+
+#
 # Compile burst-oriented VIRTIO PMD driver
 #
 CONFIG_RTE_LIBRTE_VIRTIO_PMD=y
-- 
1.8.1.4