From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 05/27] mbuf: add new packet flags for i40e
Date: Thu, 5 Jun 2014 13:08:49 +0800 [thread overview]
Message-ID: <1401944951-23783-6-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1401944951-23783-1-git-send-email-helin.zhang@intel.com>
New packet flags of both RX and TX have been added to support i40e.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
---
lib/librte_mbuf/rte_mbuf.h | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/lib/librte_mbuf/rte_mbuf.h b/lib/librte_mbuf/rte_mbuf.h
index 4a9ab41..ded2ce6 100644
--- a/lib/librte_mbuf/rte_mbuf.h
+++ b/lib/librte_mbuf/rte_mbuf.h
@@ -85,6 +85,11 @@ struct rte_ctrlmbuf {
#define PKT_RX_FDIR 0x0004 /**< RX packet with FDIR infos. */
#define PKT_RX_L4_CKSUM_BAD 0x0008 /**< L4 cksum of RX pkt. is not OK. */
#define PKT_RX_IP_CKSUM_BAD 0x0010 /**< IP cksum of RX pkt. is not OK. */
+#define PKT_RX_EIP_CKSUM_BAD 0x0000 /**< External IP header checksum error. */
+#define PKT_RX_OVERSIZE 0x0000 /**< Num of desc of an RX pkt oversize. */
+#define PKT_RX_HBUF_OVERFLOW 0x0000 /**< Header buffer overflow. */
+#define PKT_RX_RECIP_ERR 0x0000 /**< Hardware processing error. */
+#define PKT_RX_MAC_ERR 0x0000 /**< MAC error. */
#define PKT_RX_IPV4_HDR 0x0020 /**< RX packet with IPv4 header. */
#define PKT_RX_IPV4_HDR_EXT 0x0040 /**< RX packet with extended IPv4 header. */
#define PKT_RX_IPV6_HDR 0x0080 /**< RX packet with IPv6 header. */
@@ -94,6 +99,9 @@ struct rte_ctrlmbuf {
#define PKT_TX_VLAN_PKT 0x0800 /**< TX packet is a 802.1q VLAN packet. */
#define PKT_TX_IP_CKSUM 0x1000 /**< IP cksum of TX pkt. computed by NIC. */
+#define PKT_TX_IPV4_CSUM 0x1000 /**< Alias of PKT_TX_IP_CKSUM. */
+#define PKT_TX_IPV4 PKT_RX_IPV4_HDR /**< IPv4 with no IP checksum offload. */
+#define PKT_TX_IPV6 PKT_RX_IPV6_HDR /**< IPv6 packet */
/*
* Bit 14~13 used for L4 packet type with checksum enabled.
* 00: Reserved
--
1.8.1.4
next prev parent reply other threads:[~2014-06-05 5:11 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 5:08 [dpdk-dev] [PATCH v2 00/27] Add i40e PMD support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 01/27] i40e: add basic shared code Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 02/27] i40e: add PMD source files Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 03/27] pci: add macros and pci device IDs to support i40e Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 04/27] igb_uio: add i40e support Helin Zhang
2014-06-05 5:08 ` Helin Zhang [this message]
2014-06-05 15:30 ` [dpdk-dev] [PATCH v2 05/27] mbuf: add new packet flags for i40e Stephen Hemminger
[not found] ` <F35DEAC7BCE34641BA9FAC6BCA4A12E70A735ACB@SHSMSX104.ccr.corp.intel.com>
2014-06-12 1:38 ` Zhang, Helin
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 06/27] ethdev: add i40e support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 07/27] ethdev: support setting maximum packet length to less than 1518 Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 08/27] vmxnet3: enlarge the hash flags of RSS to 64 bits Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 09/27] ixgbe: " Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 10/27] igb: " Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 11/27] mk: add i40e support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 12/27] config: add configurations for i40e Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 13/27] app/test-pmd: support displaying 32 bytes RX descriptors Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 14/27] app/test-pmd: add command of 'tx_vlan set pvid port_id vlan_id (on|off)' Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 15/27] app/testpmd: enlarge the hash flags of RSS to 64 bits Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 16/27] app/test-pmd: add L3 packet type in offload flags Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 17/27] examples/dpdk_qat: use ETH_RSS_IP to replace IP hash flags of RSS Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 18/27] examples/ip_reassembly: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 19/27] examples/l3fwd-power: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 20/27] examples/l3fwd-vf: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 21/27] examples/l3fwd: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 22/27] examples/load_balancer: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 23/27] examples/multi_process: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 24/27] examples/qos_meter: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 25/27] igb_uio: add sys files to read/write specific bits in pci config space Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 26/27] pci: support reading/writing sys files of 'extended_tag' and 'max_read_request_size' Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 27/27] config: add configurations for enabling 'Extended Tag' or resetting 'Max Read Request Size' Helin Zhang
2014-06-05 8:36 ` [dpdk-dev] [PATCH v2 00/27] Add i40e PMD support Zhu, Heqing
2014-06-17 16:27 ` Thomas Monjalon
2014-06-18 8:51 ` Zhang, Helin
2014-06-18 9:23 ` Thomas Monjalon
2014-06-19 6:24 ` Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401944951-23783-6-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).