From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 08/27] vmxnet3: enlarge the hash flags of RSS to 64 bits
Date: Thu, 5 Jun 2014 13:08:52 +0800 [thread overview]
Message-ID: <1401944951-23783-9-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1401944951-23783-1-git-send-email-helin.zhang@intel.com>
As the hash flags of RSS has been enlarged from 16 bits to 64 bits
in 'struct rte_eth_rss_conf' in rte_ethdev.h, the size of it in
vmxnet3 has to be enlarged as well. In addition, the flags for
vmxnet3 only are masked, as there are flags for others in that
64 bits.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Signed-off-by: Jing Chen <jing.d.chen@intel.com>
Acked-by: Cunming Liang <cunming.liang@intel.com>
Acked-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Tested-by: Waterman Cao <waterman.cao@intel.com>
---
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 16 ++++++++++++----
1 file changed, 12 insertions(+), 4 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index 1072654..ad7cbb2 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -882,9 +882,16 @@ static uint8_t rss_intel_key[40] = {
int
vmxnet3_rss_configure(struct rte_eth_dev *dev)
{
+#define VMXNET3_RSS_OFFLOAD_ALL ( \
+ ETH_RSS_IPV4 | \
+ ETH_RSS_IPV4_TCP | \
+ ETH_RSS_IPV6 | \
+ ETH_RSS_IPV6_TCP)
+
struct vmxnet3_hw *hw;
struct VMXNET3_RSSConf *dev_rss_conf;
struct rte_eth_rss_conf *port_rss_conf;
+ uint64_t rss_hf;
uint8_t i, j;
PMD_INIT_FUNC_TRACE();
@@ -916,13 +923,14 @@ vmxnet3_rss_configure(struct rte_eth_dev *dev)
/* loading hashType */
dev_rss_conf->hashType = 0;
- if (port_rss_conf->rss_hf & ETH_RSS_IPV4)
+ rss_hf = port_rss_conf->rss_hf & VMXNET3_RSS_OFFLOAD_ALL;
+ if (rss_hf & ETH_RSS_IPV4)
dev_rss_conf->hashType |= VMXNET3_RSS_HASH_TYPE_IPV4;
- if (port_rss_conf->rss_hf & ETH_RSS_IPV4_TCP)
+ if (rss_hf & ETH_RSS_IPV4_TCP)
dev_rss_conf->hashType |= VMXNET3_RSS_HASH_TYPE_TCP_IPV4;
- if (port_rss_conf->rss_hf & ETH_RSS_IPV6)
+ if (rss_hf & ETH_RSS_IPV6)
dev_rss_conf->hashType |= VMXNET3_RSS_HASH_TYPE_IPV6;
- if (port_rss_conf->rss_hf & ETH_RSS_IPV6_TCP)
+ if (rss_hf & ETH_RSS_IPV6_TCP)
dev_rss_conf->hashType |= VMXNET3_RSS_HASH_TYPE_TCP_IPV6;
return VMXNET3_SUCCESS;
--
1.8.1.4
next prev parent reply other threads:[~2014-06-05 5:11 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 5:08 [dpdk-dev] [PATCH v2 00/27] Add i40e PMD support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 01/27] i40e: add basic shared code Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 02/27] i40e: add PMD source files Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 03/27] pci: add macros and pci device IDs to support i40e Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 04/27] igb_uio: add i40e support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 05/27] mbuf: add new packet flags for i40e Helin Zhang
2014-06-05 15:30 ` Stephen Hemminger
[not found] ` <F35DEAC7BCE34641BA9FAC6BCA4A12E70A735ACB@SHSMSX104.ccr.corp.intel.com>
2014-06-12 1:38 ` Zhang, Helin
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 06/27] ethdev: add i40e support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 07/27] ethdev: support setting maximum packet length to less than 1518 Helin Zhang
2014-06-05 5:08 ` Helin Zhang [this message]
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 09/27] ixgbe: enlarge the hash flags of RSS to 64 bits Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 10/27] igb: " Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 11/27] mk: add i40e support Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 12/27] config: add configurations for i40e Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 13/27] app/test-pmd: support displaying 32 bytes RX descriptors Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 14/27] app/test-pmd: add command of 'tx_vlan set pvid port_id vlan_id (on|off)' Helin Zhang
2014-06-05 5:08 ` [dpdk-dev] [PATCH v2 15/27] app/testpmd: enlarge the hash flags of RSS to 64 bits Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 16/27] app/test-pmd: add L3 packet type in offload flags Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 17/27] examples/dpdk_qat: use ETH_RSS_IP to replace IP hash flags of RSS Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 18/27] examples/ip_reassembly: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 19/27] examples/l3fwd-power: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 20/27] examples/l3fwd-vf: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 21/27] examples/l3fwd: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 22/27] examples/load_balancer: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 23/27] examples/multi_process: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 24/27] examples/qos_meter: " Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 25/27] igb_uio: add sys files to read/write specific bits in pci config space Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 26/27] pci: support reading/writing sys files of 'extended_tag' and 'max_read_request_size' Helin Zhang
2014-06-05 5:09 ` [dpdk-dev] [PATCH v2 27/27] config: add configurations for enabling 'Extended Tag' or resetting 'Max Read Request Size' Helin Zhang
2014-06-05 8:36 ` [dpdk-dev] [PATCH v2 00/27] Add i40e PMD support Zhu, Heqing
2014-06-17 16:27 ` Thomas Monjalon
2014-06-18 8:51 ` Zhang, Helin
2014-06-18 9:23 ` Thomas Monjalon
2014-06-19 6:24 ` Zhang, Helin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401944951-23783-9-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).