From: Alan Carew <alan.carew@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/4] [PATCH 1/4] igb_uio: Add interrupt_mode sysfs entry for igb_uio devices
Date: Thu, 5 Jun 2014 15:39:16 +0100 [thread overview]
Message-ID: <1401979159-14576-2-git-send-email-alan.carew@intel.com> (raw)
In-Reply-To: <1401979159-14576-1-git-send-email-alan.carew@intel.com>
This patch adds an "interrupt_mode" sysfs entry for igb_uio devices,
allowing userspace eal_pci to track which interrupt mode has been enabled in kernel space.
The sysfs entry can be inspected via /sys/bus/pci/devices/<D:B:D:F/interrupt_mode
Signed-off-by: Alan Carew <alan.carew@intel.com>
---
.../common/include/rte_pci_dev_feature_defs.h | 85 ++++++++++++++++++++
.../common/include/rte_pci_dev_features.h | 70 ++++++++++++++++
lib/librte_eal/linuxapp/igb_uio/igb_uio.c | 48 +++++++++---
3 files changed, 193 insertions(+), 10 deletions(-)
create mode 100755 lib/librte_eal/common/include/rte_pci_dev_feature_defs.h
create mode 100755 lib/librte_eal/common/include/rte_pci_dev_features.h
diff --git a/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h b/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h
new file mode 100755
index 0000000..d23ed7d
--- /dev/null
+++ b/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h
@@ -0,0 +1,85 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef _RTE_PCI_DEV_DEFS_H_
+#define _RTE_PCI_DEV_DEFS_H_
+
+#define RTE_PCI_DEV_FEATURE_INTR_MODE "interrupt_mode"
+
+#define INTR_NAME_LEN 10
+
+#define IGBUIO_NONE_INTR_NAME "none"
+#define IGBUIO_LEGACY_INTR_NAME "legacy"
+#define IGBUIO_MSI_INTR_NAME "msi"
+#define IGBUIO_MSIX_INTR_NAME "msix"
+
+
+#define INTR_MODE(id, mode_name) \
+ .mode = (id), .name = (mode_name)
+
+/* interrupt mode */
+enum igbuio_intr_mode {
+ IGBUIO_NONE_INTR_MODE = 0,
+ IGBUIO_LEGACY_INTR_MODE,
+ IGBUIO_MSI_INTR_MODE,
+ IGBUIO_MSIX_INTR_MODE,
+ IGBUIO_INTR_MODE_MAX
+};
+
+#endif /* _RTE_PCI_DEV_DEFS_H_ */
diff --git a/lib/librte_eal/common/include/rte_pci_dev_features.h b/lib/librte_eal/common/include/rte_pci_dev_features.h
new file mode 100755
index 0000000..a45c056
--- /dev/null
+++ b/lib/librte_eal/common/include/rte_pci_dev_features.h
@@ -0,0 +1,70 @@
+/*-
+ * This file is provided under a dual BSD/GPLv2 license. When using or
+ * redistributing this file, you may do so under either license.
+ *
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation
+ *
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ */
+
+#ifndef RTE_PCI_DEV_INTR_MODE
+#define RTE_PCI_DEV_INTR_MODE(id, mode_name)
+#endif
+
+RTE_PCI_DEV_INTR_MODE(IGBUIO_NONE_INTR_MODE, IGBUIO_NONE_INTR_NAME)
+RTE_PCI_DEV_INTR_MODE(IGBUIO_LEGACY_INTR_MODE, IGBUIO_LEGACY_INTR_NAME)
+RTE_PCI_DEV_INTR_MODE(IGBUIO_MSI_INTR_MODE, IGBUIO_MSI_INTR_NAME)
+RTE_PCI_DEV_INTR_MODE(IGBUIO_MSIX_INTR_MODE, IGBUIO_MSIX_INTR_NAME)
+
+#undef RTE_PCI_DEV_INTR_MODE
+
diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 09c40bf..dd1124b 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -34,6 +34,8 @@
#include <xen/xen.h>
#endif
+#include <rte_pci_dev_feature_defs.h>
+
/**
* MSI-X related macros, copy from linux/pci_regs.h in kernel 2.6.39,
* but none of them in kernel 2.6.35.
@@ -49,12 +51,15 @@
#define IGBUIO_NUM_MSI_VECTORS 1
-/* interrupt mode */
-enum igbuio_intr_mode {
- IGBUIO_LEGACY_INTR_MODE = 0,
- IGBUIO_MSI_INTR_MODE,
- IGBUIO_MSIX_INTR_MODE,
- IGBUIO_INTR_MODE_MAX
+struct rte_pci_dev_intr_mode {
+ enum igbuio_intr_mode mode;
+ const char *name;
+};
+
+/* Table of interrupt modes */
+static struct rte_pci_dev_intr_mode interrupt_modes[] = {
+#define RTE_PCI_DEV_INTR_MODE(id, mode_name) {INTR_MODE(id, mode_name)},
+#include <rte_pci_dev_features.h>
};
/**
@@ -150,8 +155,32 @@ store_max_vfs(struct device *dev, struct device_attribute *attr,
}
static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
+
+static ssize_t
+show_interrupt_mode(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ unsigned i, num_modes;
+ enum igbuio_intr_mode mode;
+ struct uio_info *info;
+ struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+
+ info = pci_get_drvdata(pdev);
+ mode = ((struct rte_uio_pci_dev *)info->priv)->mode;
+ num_modes = sizeof(interrupt_modes)/sizeof(interrupt_modes[0]);
+
+ for (i = 0; i < num_modes; i++) {
+ if (mode == interrupt_modes[i].mode)
+ return snprintf(buf, INTR_NAME_LEN, "%s\n", interrupt_modes[i].name );
+ }
+ return snprintf(buf, INTR_NAME_LEN, "unknown\n");
+}
+
+static DEVICE_ATTR(interrupt_mode, S_IRUGO, show_interrupt_mode, NULL);
+
static struct attribute *dev_attrs[] = {
&dev_attr_max_vfs.attr,
+ &dev_attr_interrupt_mode.attr,
NULL,
};
@@ -520,7 +549,7 @@ igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
#endif
udev->info.priv = udev;
udev->pdev = dev;
- udev->mode = 0; /* set the default value for interrupt mode */
+ udev->mode = IGBUIO_LEGACY_INTR_MODE; /* set the default value for interrupt mode */
spin_lock_init(&udev->lock);
/* check if it need to try msix first */
@@ -610,11 +639,10 @@ igbuio_config_intr_mode(char *intr_str)
printk(KERN_INFO "Use MSIX interrupt by default\n");
return 0;
}
-
- if (!strcmp(intr_str, "msix")) {
+ if (!strcmp(intr_str, IGBUIO_MSIX_INTR_NAME)) {
igbuio_intr_mode_preferred = IGBUIO_MSIX_INTR_MODE;
printk(KERN_INFO "Use MSIX interrupt\n");
- } else if (!strcmp(intr_str, "legacy")) {
+ } else if (!strcmp(intr_str, IGBUIO_LEGACY_INTR_NAME)) {
igbuio_intr_mode_preferred = IGBUIO_LEGACY_INTR_MODE;
printk(KERN_INFO "Use legacy interrupt\n");
} else {
--
1.7.0.7
next prev parent reply other threads:[~2014-06-05 14:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-05 14:39 [dpdk-dev] [PATCH 0/4] librte_pmd_virtio :Fix: virtio_pci.h non-existent virtio feature bit-flag tested Alan Carew
2014-06-05 14:39 ` Alan Carew [this message]
2014-06-05 17:20 ` [dpdk-dev] [PATCH 1/4] [PATCH 1/4] igb_uio: Add interrupt_mode sysfs entry for igb_uio devices Stephen Hemminger
2014-06-05 14:39 ` [dpdk-dev] [PATCH 2/4] [PATCH 2/4] eal_pci: Add interrupt mode to rte_pci_device and parsing to eal_pci Alan Carew
2014-06-05 14:39 ` [dpdk-dev] [PATCH 3/4] [PATCH 3/4] FreeBSD: Adds the equivalent interrupt mode setting and parsing Alan Carew
2014-06-05 14:39 ` [dpdk-dev] [PATCH 4/4] [PATCH 4/4] virtio: Fixes the VIRTIO_PCI_CONFIG macro to use the correct offset to the Virtio header Alan Carew
2014-06-05 15:22 ` [dpdk-dev] [PATCH 0/4] librte_pmd_virtio :Fix: virtio_pci.h non-existent virtio feature bit-flag tested Stephen Hemminger
2014-06-05 17:06 ` Stephen Hemminger
2014-06-16 10:19 ` Carew, Alan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1401979159-14576-2-git-send-email-alan.carew@intel.com \
--to=alan.carew@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).