From: Konstantin Ananyev <konstantin.ananyev@intel.com>
To: dev@dpdk.org
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCHv3 4/5] acl: New sample l3fwd-acl
Date: Fri, 13 Jun 2014 12:26:53 +0100 [thread overview]
Message-ID: <1402658814-21881-5-git-send-email-konstantin.ananyev@intel.com> (raw)
In-Reply-To: <1402658814-21881-1-git-send-email-konstantin.ananyev@intel.com>
Demonstrates the use of the ACL library in the DPDK application to
implement packet classification and L3 forwarding.
Signed-off-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/Makefile | 1 +
examples/l3fwd-acl/Makefile | 56 ++
examples/l3fwd-acl/main.c | 2140 +++++++++++++++++++++++++++++++++++++++++++
examples/l3fwd-acl/main.h | 45 +
4 files changed, 2242 insertions(+), 0 deletions(-)
create mode 100644 examples/l3fwd-acl/Makefile
create mode 100644 examples/l3fwd-acl/main.c
create mode 100644 examples/l3fwd-acl/main.h
diff --git a/examples/Makefile b/examples/Makefile
index d6b08c2..f3d1726 100644
--- a/examples/Makefile
+++ b/examples/Makefile
@@ -64,5 +64,6 @@ DIRS-y += vhost
DIRS-$(CONFIG_RTE_LIBRTE_XEN_DOM0) += vhost_xen
DIRS-y += vmdq
DIRS-y += vmdq_dcb
+DIRS-$(CONFIG_RTE_LIBRTE_ACL) += l3fwd-acl
include $(RTE_SDK)/mk/rte.extsubdir.mk
diff --git a/examples/l3fwd-acl/Makefile b/examples/l3fwd-acl/Makefile
new file mode 100644
index 0000000..7ba7247
--- /dev/null
+++ b/examples/l3fwd-acl/Makefile
@@ -0,0 +1,56 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-default-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = l3fwd-acl
+
+# all source are stored in SRCS-y
+SRCS-y := main.c
+
+CFLAGS += -O3
+CFLAGS += $(WERROR_FLAGS)
+
+# workaround for a gcc bug with noreturn attribute
+# http://gcc.gnu.org/bugzilla/show_bug.cgi?id=12603
+ifeq ($(CONFIG_RTE_TOOLCHAIN_GCC),y)
+CFLAGS_main.o += -Wno-return-type
+endif
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/l3fwd-acl/main.c b/examples/l3fwd-acl/main.c
new file mode 100644
index 0000000..6c8ac26
--- /dev/null
+++ b/examples/l3fwd-acl/main.c
@@ -0,0 +1,2140 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/types.h>
+#include <string.h>
+#include <sys/queue.h>
+#include <stdarg.h>
+#include <errno.h>
+#include <getopt.h>
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_memory.h>
+#include <rte_memcpy.h>
+#include <rte_memzone.h>
+#include <rte_tailq.h>
+#include <rte_eal.h>
+#include <rte_per_lcore.h>
+#include <rte_launch.h>
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_prefetch.h>
+#include <rte_lcore.h>
+#include <rte_per_lcore.h>
+#include <rte_branch_prediction.h>
+#include <rte_interrupts.h>
+#include <rte_pci.h>
+#include <rte_random.h>
+#include <rte_debug.h>
+#include <rte_ether.h>
+#include <rte_ethdev.h>
+#include <rte_ring.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+#include <rte_ip.h>
+#include <rte_tcp.h>
+#include <rte_udp.h>
+#include <rte_string_fns.h>
+#include <rte_acl.h>
+
+#include "main.h"
+
+#define DO_RFC_1812_CHECKS
+
+#define RTE_LOGTYPE_L3FWD RTE_LOGTYPE_USER1
+
+#define MAX_JUMBO_PKT_LEN 9600
+
+#define MEMPOOL_CACHE_SIZE 256
+
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+/*
+ * This expression is used to calculate the number of mbufs needed
+ * depending on user input, taking into account memory for rx and tx hardware
+ * rings, cache per lcore and mtable per port per lcore.
+ * RTE_MAX is used to ensure that NB_MBUF never goes below a
+ * minimum value of 8192
+ */
+
+#define NB_MBUF RTE_MAX(\
+ (nb_ports * nb_rx_queue*RTE_TEST_RX_DESC_DEFAULT + \
+ nb_ports * nb_lcores * MAX_PKT_BURST + \
+ nb_ports * n_tx_queue * RTE_TEST_TX_DESC_DEFAULT + \
+ nb_lcores * MEMPOOL_CACHE_SIZE), \
+ (unsigned)8192)
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /**< Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /**< Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /**< Default values of RX write-back threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /**< Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0 /**< Default values of TX host threshold reg. */
+#define TX_WTHRESH 0 /**< Default values of TX write-back threshold reg. */
+
+#define MAX_PKT_BURST 32
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define NB_SOCKETS 8
+
+/* Configure how many packets ahead to prefetch, when reading packets */
+#define PREFETCH_OFFSET 3
+
+/*
+ * Configurable number of RX/TX ring descriptors
+ */
+#define RTE_TEST_RX_DESC_DEFAULT 128
+#define RTE_TEST_TX_DESC_DEFAULT 512
+static uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT;
+static uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT;
+
+/* ethernet addresses of ports */
+static struct ether_addr ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+static int promiscuous_on; /**< Ports set in promiscuous mode off by default. */
+static int numa_on = 1; /**< NUMA is enabled by default. */
+
+struct mbuf_table {
+ uint16_t len;
+ struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+struct lcore_rx_queue {
+ uint8_t port_id;
+ uint8_t queue_id;
+} __rte_cache_aligned;
+
+#define MAX_RX_QUEUE_PER_LCORE 16
+#define MAX_TX_QUEUE_PER_PORT RTE_MAX_ETHPORTS
+#define MAX_RX_QUEUE_PER_PORT 128
+
+#define MAX_LCORE_PARAMS 1024
+struct lcore_params {
+ uint8_t port_id;
+ uint8_t queue_id;
+ uint8_t lcore_id;
+} __rte_cache_aligned;
+
+static struct lcore_params lcore_params_array[MAX_LCORE_PARAMS];
+static struct lcore_params lcore_params_array_default[] = {
+ {0, 0, 2},
+ {0, 1, 2},
+ {0, 2, 2},
+ {1, 0, 2},
+ {1, 1, 2},
+ {1, 2, 2},
+ {2, 0, 2},
+ {3, 0, 3},
+ {3, 1, 3},
+};
+
+static struct lcore_params *lcore_params = lcore_params_array_default;
+static uint16_t nb_lcore_params = sizeof(lcore_params_array_default) /
+ sizeof(lcore_params_array_default[0]);
+
+static struct rte_eth_conf port_conf = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_RSS,
+ .max_rx_pkt_len = ETHER_MAX_LEN,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 1, /**< IP checksum offload enabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+ .rx_adv_conf = {
+ .rss_conf = {
+ .rss_key = NULL,
+ .rss_hf = ETH_RSS_IPV4 | ETH_RSS_IPV4_TCP
+ | ETH_RSS_IPV4_UDP
+ | ETH_RSS_IPV6 | ETH_RSS_IPV6_EX
+ | ETH_RSS_IPV6_TCP | ETH_RSS_IPV6_TCP_EX
+ | ETH_RSS_IPV6_UDP | ETH_RSS_IPV6_UDP_EX,
+ },
+ },
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+};
+
+static const struct rte_eth_rxconf rx_conf = {
+ .rx_thresh = {
+ .pthresh = RX_PTHRESH,
+ .hthresh = RX_HTHRESH,
+ .wthresh = RX_WTHRESH,
+ },
+ .rx_free_thresh = 32,
+};
+
+static const struct rte_eth_txconf tx_conf = {
+ .tx_thresh = {
+ .pthresh = TX_PTHRESH,
+ .hthresh = TX_HTHRESH,
+ .wthresh = TX_WTHRESH,
+ },
+ .tx_free_thresh = 0, /* Use PMD default values */
+ .tx_rs_thresh = 0, /* Use PMD default values */
+ .txq_flags = 0x0,
+};
+
+static struct rte_mempool *pktmbuf_pool[NB_SOCKETS];
+
+/***********************start of ACL part******************************/
+#ifdef DO_RFC_1812_CHECKS
+static inline int
+is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len);
+#endif
+static inline int
+send_single_packet(struct rte_mbuf *m, uint8_t port);
+
+#define MAX_ACL_RULE_NUM 100000
+#define DEFAULT_MAX_CATEGORIES 1
+#define L3FWD_ACL_IPV4_NAME "l3fwd-acl-ipv4"
+#define L3FWD_ACL_IPV6_NAME "l3fwd-acl-ipv6"
+#define ACL_LEAD_CHAR ('@')
+#define ROUTE_LEAD_CHAR ('R')
+#define COMMENT_LEAD_CHAR ('#')
+#define OPTION_CONFIG "config"
+#define OPTION_NONUMA "no-numa"
+#define OPTION_ENBJMO "enable-jumbo"
+#define OPTION_RULE_IPV4 "rule_ipv4"
+#define OPTION_RULE_IPV6 "rule_ipv6"
+#define OPTION_SCALAR "scalar"
+#define ACL_DENY_SIGNATURE 0xf0000000
+#define RTE_LOGTYPE_L3FWDACL RTE_LOGTYPE_USER3
+#define acl_log(format, ...) RTE_LOG(ERR, L3FWDACL, format, ##__VA_ARGS__)
+#define uint32_t_to_char(ip, a, b, c, d) do {\
+ *a = (unsigned char)(ip >> 24 & 0xff);\
+ *b = (unsigned char)(ip >> 16 & 0xff);\
+ *c = (unsigned char)(ip >> 8 & 0xff);\
+ *d = (unsigned char)(ip & 0xff);\
+ } while (0)
+#define OFF_ETHHEAD (sizeof(struct ether_hdr))
+#define OFF_IPV42PROTO (offsetof(struct ipv4_hdr, next_proto_id))
+#define OFF_IPV62PROTO (offsetof(struct ipv6_hdr, proto))
+#define MBUF_IPV4_2PROTO(m) \
+ (rte_pktmbuf_mtod((m), uint8_t *) + OFF_ETHHEAD + OFF_IPV42PROTO)
+#define MBUF_IPV6_2PROTO(m) \
+ (rte_pktmbuf_mtod((m), uint8_t *) + OFF_ETHHEAD + OFF_IPV62PROTO)
+
+#define GET_CB_FIELD(in, fd, base, lim, dlm) do { \
+ unsigned long val; \
+ char *end; \
+ errno = 0; \
+ val = strtoul((in), &end, (base)); \
+ if (errno != 0 || end[0] != (dlm) || val > (lim)) \
+ return (-EINVAL); \
+ (fd) = (typeof(fd))val; \
+ (in) = end + 1; \
+} while (0)
+
+#define CLASSIFY(context, data, res, num, cat) do { \
+ if (scalar) \
+ rte_acl_classify_scalar((context), (data), \
+ (res), (num), (cat)); \
+ else \
+ rte_acl_classify((context), (data), \
+ (res), (num), (cat)); \
+} while (0)
+
+/*
+ * ACL rules should have higher priorities than route ones to ensure ACL rule
+ * always be found when input packets have multi-matches in the database.
+ * A exception case is performance measure, which can define route rules with
+ * higher priority and route rules will always be returned in each lookup.
+ * Reserve range from ACL_RULE_PRIORITY_MAX + 1 to
+ * RTE_ACL_MAX_PRIORITY for route entries in performance measure
+ */
+#define ACL_RULE_PRIORITY_MAX 0x10000000
+
+/*
+ * Forward port info save in ACL lib starts from 1
+ * since ACL assume 0 is invalid.
+ * So, need add 1 when saving and minus 1 when forwarding packets.
+ */
+#define FWD_PORT_SHIFT 1
+
+/*
+ * Rule and trace formats definitions.
+ */
+
+enum {
+ PROTO_FIELD_IPV4,
+ SRC_FIELD_IPV4,
+ DST_FIELD_IPV4,
+ SRCP_FIELD_IPV4,
+ DSTP_FIELD_IPV4,
+ NUM_FIELDS_IPV4
+};
+
+struct rte_acl_field_def ipv4_defs[NUM_FIELDS_IPV4] = {
+ {
+ .type = RTE_ACL_FIELD_TYPE_BITMASK,
+ .size = sizeof(uint8_t),
+ .field_index = PROTO_FIELD_IPV4,
+ .input_index = RTE_ACL_IPV4VLAN_PROTO,
+ .offset = 0,
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = SRC_FIELD_IPV4,
+ .input_index = RTE_ACL_IPV4VLAN_SRC,
+ .offset = offsetof(struct ipv4_hdr, src_addr) -
+ offsetof(struct ipv4_hdr, next_proto_id),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = DST_FIELD_IPV4,
+ .input_index = RTE_ACL_IPV4VLAN_DST,
+ .offset = offsetof(struct ipv4_hdr, dst_addr) -
+ offsetof(struct ipv4_hdr, next_proto_id),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_RANGE,
+ .size = sizeof(uint16_t),
+ .field_index = SRCP_FIELD_IPV4,
+ .input_index = RTE_ACL_IPV4VLAN_PORTS,
+ .offset = sizeof(struct ipv4_hdr) -
+ offsetof(struct ipv4_hdr, next_proto_id),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_RANGE,
+ .size = sizeof(uint16_t),
+ .field_index = DSTP_FIELD_IPV4,
+ .input_index = RTE_ACL_IPV4VLAN_PORTS,
+ .offset = sizeof(struct ipv4_hdr) -
+ offsetof(struct ipv4_hdr, next_proto_id) +
+ sizeof(uint16_t),
+ },
+};
+
+#define IPV6_ADDR_LEN 16
+#define IPV6_ADDR_U16 (IPV6_ADDR_LEN / sizeof(uint16_t))
+#define IPV6_ADDR_U32 (IPV6_ADDR_LEN / sizeof(uint32_t))
+
+enum {
+ PROTO_FIELD_IPV6,
+ SRC1_FIELD_IPV6,
+ SRC2_FIELD_IPV6,
+ SRC3_FIELD_IPV6,
+ SRC4_FIELD_IPV6,
+ DST1_FIELD_IPV6,
+ DST2_FIELD_IPV6,
+ DST3_FIELD_IPV6,
+ DST4_FIELD_IPV6,
+ SRCP_FIELD_IPV6,
+ DSTP_FIELD_IPV6,
+ NUM_FIELDS_IPV6
+};
+
+struct rte_acl_field_def ipv6_defs[NUM_FIELDS_IPV6] = {
+ {
+ .type = RTE_ACL_FIELD_TYPE_BITMASK,
+ .size = sizeof(uint8_t),
+ .field_index = PROTO_FIELD_IPV6,
+ .input_index = PROTO_FIELD_IPV6,
+ .offset = 0,
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = SRC1_FIELD_IPV6,
+ .input_index = SRC1_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, src_addr) -
+ offsetof(struct ipv6_hdr, proto),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = SRC2_FIELD_IPV6,
+ .input_index = SRC2_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, src_addr) -
+ offsetof(struct ipv6_hdr, proto) + sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = SRC3_FIELD_IPV6,
+ .input_index = SRC3_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, src_addr) -
+ offsetof(struct ipv6_hdr, proto) + 2 * sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = SRC4_FIELD_IPV6,
+ .input_index = SRC4_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, src_addr) -
+ offsetof(struct ipv6_hdr, proto) + 3 * sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = DST1_FIELD_IPV6,
+ .input_index = DST1_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, dst_addr)
+ - offsetof(struct ipv6_hdr, proto),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = DST2_FIELD_IPV6,
+ .input_index = DST2_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, dst_addr) -
+ offsetof(struct ipv6_hdr, proto) + sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = DST3_FIELD_IPV6,
+ .input_index = DST3_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, dst_addr) -
+ offsetof(struct ipv6_hdr, proto) + 2 * sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_MASK,
+ .size = sizeof(uint32_t),
+ .field_index = DST4_FIELD_IPV6,
+ .input_index = DST4_FIELD_IPV6,
+ .offset = offsetof(struct ipv6_hdr, dst_addr) -
+ offsetof(struct ipv6_hdr, proto) + 3 * sizeof(uint32_t),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_RANGE,
+ .size = sizeof(uint16_t),
+ .field_index = SRCP_FIELD_IPV6,
+ .input_index = SRCP_FIELD_IPV6,
+ .offset = sizeof(struct ipv6_hdr) -
+ offsetof(struct ipv6_hdr, proto),
+ },
+ {
+ .type = RTE_ACL_FIELD_TYPE_RANGE,
+ .size = sizeof(uint16_t),
+ .field_index = DSTP_FIELD_IPV6,
+ .input_index = SRCP_FIELD_IPV6,
+ .offset = sizeof(struct ipv6_hdr) -
+ offsetof(struct ipv6_hdr, proto) + sizeof(uint16_t),
+ },
+};
+
+enum {
+ CB_FLD_SRC_ADDR,
+ CB_FLD_DST_ADDR,
+ CB_FLD_SRC_PORT_LOW,
+ CB_FLD_SRC_PORT_DLM,
+ CB_FLD_SRC_PORT_HIGH,
+ CB_FLD_DST_PORT_LOW,
+ CB_FLD_DST_PORT_DLM,
+ CB_FLD_DST_PORT_HIGH,
+ CB_FLD_PROTO,
+ CB_FLD_USERDATA,
+ CB_FLD_NUM,
+};
+
+RTE_ACL_RULE_DEF(acl4_rule, RTE_DIM(ipv4_defs));
+RTE_ACL_RULE_DEF(acl6_rule, RTE_DIM(ipv6_defs));
+
+struct acl_search_t {
+ const uint8_t *data_ipv4[MAX_PKT_BURST];
+ struct rte_mbuf *m_ipv4[MAX_PKT_BURST];
+ uint32_t res_ipv4[MAX_PKT_BURST];
+ int num_ipv4;
+
+ const uint8_t *data_ipv6[MAX_PKT_BURST];
+ struct rte_mbuf *m_ipv6[MAX_PKT_BURST];
+ uint32_t res_ipv6[MAX_PKT_BURST];
+ int num_ipv6;
+};
+
+static struct {
+ char mapped[NB_SOCKETS];
+ struct rte_acl_ctx *acx_ipv4[NB_SOCKETS];
+ struct rte_acl_ctx *acx_ipv6[NB_SOCKETS];
+#ifdef L3FWDACL_DEBUG
+ struct acl4_rule *rule_ipv4;
+ struct acl6_rule *rule_ipv6;
+#endif
+} acl_config;
+
+static struct{
+ const char *rule_ipv4_name;
+ const char *rule_ipv6_name;
+ int scalar;
+} parm_config;
+
+const char cb_port_delim[] = ":";
+
+static inline void
+print_one_ipv4_rule(struct acl4_rule *rule, int extra)
+{
+ unsigned char a, b, c, d;
+
+ uint32_t_to_char(rule->field[SRC_FIELD_IPV4].value.u32,
+ &a, &b, &c, &d);
+ printf("%hhu.%hhu.%hhu.%hhu/%u ", a, b, c, d,
+ rule->field[SRC_FIELD_IPV4].mask_range.u32);
+ uint32_t_to_char(rule->field[DST_FIELD_IPV4].value.u32,
+ &a, &b, &c, &d);
+ printf("%hhu.%hhu.%hhu.%hhu/%u ", a, b, c, d,
+ rule->field[DST_FIELD_IPV4].mask_range.u32);
+ printf("%hu : %hu %hu : %hu 0x%hhx/0x%hhx ",
+ rule->field[SRCP_FIELD_IPV4].value.u16,
+ rule->field[SRCP_FIELD_IPV4].mask_range.u16,
+ rule->field[DSTP_FIELD_IPV4].value.u16,
+ rule->field[DSTP_FIELD_IPV4].mask_range.u16,
+ rule->field[PROTO_FIELD_IPV4].value.u8,
+ rule->field[PROTO_FIELD_IPV4].mask_range.u8);
+ if (extra)
+ printf("0x%x-0x%x-0x%x ",
+ rule->data.category_mask,
+ rule->data.priority,
+ rule->data.userdata);
+}
+
+static inline void
+print_one_ipv6_rule(struct acl6_rule *rule, int extra)
+{
+ unsigned char a, b, c, d;
+
+ uint32_t_to_char(rule->field[SRC1_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf("%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[SRC2_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[SRC3_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[SRC4_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x/%u ", a, b, c, d,
+ rule->field[SRC1_FIELD_IPV6].mask_range.u32
+ + rule->field[SRC2_FIELD_IPV6].mask_range.u32
+ + rule->field[SRC3_FIELD_IPV6].mask_range.u32
+ + rule->field[SRC4_FIELD_IPV6].mask_range.u32);
+
+ uint32_t_to_char(rule->field[DST1_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf("%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[DST2_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[DST3_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x", a, b, c, d);
+ uint32_t_to_char(rule->field[DST4_FIELD_IPV6].value.u32,
+ &a, &b, &c, &d);
+ printf(":%.2x%.2x:%.2x%.2x/%u ", a, b, c, d,
+ rule->field[DST1_FIELD_IPV6].mask_range.u32
+ + rule->field[DST2_FIELD_IPV6].mask_range.u32
+ + rule->field[DST3_FIELD_IPV6].mask_range.u32
+ + rule->field[DST4_FIELD_IPV6].mask_range.u32);
+
+ printf("%hu : %hu %hu : %hu 0x%hhx/0x%hhx ",
+ rule->field[SRCP_FIELD_IPV6].value.u16,
+ rule->field[SRCP_FIELD_IPV6].mask_range.u16,
+ rule->field[DSTP_FIELD_IPV6].value.u16,
+ rule->field[DSTP_FIELD_IPV6].mask_range.u16,
+ rule->field[PROTO_FIELD_IPV6].value.u8,
+ rule->field[PROTO_FIELD_IPV6].mask_range.u8);
+ if (extra)
+ printf("0x%x-0x%x-0x%x ",
+ rule->data.category_mask,
+ rule->data.priority,
+ rule->data.userdata);
+}
+
+/* Bypass comment and empty lines */
+static inline int
+is_bypass_line(char *buff)
+{
+ int i = 0;
+
+ /* comment line */
+ if (buff[0] == COMMENT_LEAD_CHAR)
+ return 1;
+ /* empty line */
+ while (buff[i] != '\0') {
+ if (!isspace(buff[i]))
+ return 0;
+ i++;
+ }
+ return 1;
+}
+
+#ifdef L3FWDACL_DEBUG
+static inline void
+dump_acl4_rule(struct rte_mbuf *m, uint32_t sig)
+{
+ uint32_t offset = sig & ~ACL_DENY_SIGNATURE;
+ unsigned char a, b, c, d;
+ struct ipv4_hdr *ipv4_hdr = (struct ipv4_hdr *)
+ (rte_pktmbuf_mtod(m, unsigned char *) +
+ sizeof(struct ether_hdr));
+
+ uint32_t_to_char(rte_bswap32(ipv4_hdr->src_addr), &a, &b, &c, &d);
+ printf("Packet Src:%hhu.%hhu.%hhu.%hhu ", a, b, c, d);
+ uint32_t_to_char(rte_bswap32(ipv4_hdr->dst_addr), &a, &b, &c, &d);
+ printf("Dst:%hhu.%hhu.%hhu.%hhu ", a, b, c, d);
+
+ printf("Src port:%hu,Dst port:%hu ",
+ rte_bswap16(*(uint16_t *)(ipv4_hdr + 1)),
+ rte_bswap16(*((uint16_t *)(ipv4_hdr + 1) + 1)));
+ printf("hit ACL %d - ", offset);
+
+ print_one_ipv4_rule(acl_config.rule_ipv4 + offset, 1);
+
+ printf("\n\n");
+}
+
+static inline void
+dump_acl6_rule(struct rte_mbuf *m, uint32_t sig)
+{
+ unsigned i;
+ uint32_t offset = sig & ~ACL_DENY_SIGNATURE;
+ struct ipv6_hdr *ipv6_hdr = (struct ipv6_hdr *)
+ (rte_pktmbuf_mtod(m, unsigned char *) +
+ sizeof(struct ether_hdr));
+
+ printf("Packet Src");
+ for (i = 0; i < RTE_DIM(ipv6_hdr->src_addr); i += sizeof(uint16_t))
+ printf(":%.2x%.2x",
+ ipv6_hdr->src_addr[i], ipv6_hdr->src_addr[i + 1]);
+
+ printf("\nDst");
+ for (i = 0; i < RTE_DIM(ipv6_hdr->dst_addr); i += sizeof(uint16_t))
+ printf(":%.2x%.2x",
+ ipv6_hdr->dst_addr[i], ipv6_hdr->dst_addr[i + 1]);
+
+ printf("\nSrc port:%hu,Dst port:%hu ",
+ rte_bswap16(*(uint16_t *)(ipv6_hdr + 1)),
+ rte_bswap16(*((uint16_t *)(ipv6_hdr + 1) + 1)));
+ printf("hit ACL %d - ", offset);
+
+ print_one_ipv6_rule(acl_config.rule_ipv6 + offset, 1);
+
+ printf("\n\n");
+}
+#endif /* L3FWDACL_DEBUG */
+
+static inline void
+dump_ipv4_rules(struct acl4_rule *rule, int num, int extra)
+{
+ int i;
+
+ for (i = 0; i < num; i++, rule++) {
+ printf("\t%d:", i + 1);
+ print_one_ipv4_rule(rule, extra);
+ printf("\n");
+ }
+}
+
+static inline void
+dump_ipv6_rules(struct acl6_rule *rule, int num, int extra)
+{
+ int i;
+
+ for (i = 0; i < num; i++, rule++) {
+ printf("\t%d:", i + 1);
+ print_one_ipv6_rule(rule, extra);
+ printf("\n");
+ }
+}
+
+#ifdef DO_RFC_1812_CHECKS
+static inline void
+prepare_one_packet(struct rte_mbuf **pkts_in, struct acl_search_t *acl,
+ int index)
+{
+ struct ipv4_hdr *ipv4_hdr;
+ struct rte_mbuf *pkt = pkts_in[index];
+
+ int type = pkt->ol_flags & (PKT_RX_IPV4_HDR | PKT_RX_IPV6_HDR);
+
+ if (type == PKT_RX_IPV4_HDR) {
+
+ ipv4_hdr = (struct ipv4_hdr *)(rte_pktmbuf_mtod(pkt,
+ unsigned char *) + sizeof(struct ether_hdr));
+
+ /* Check to make sure the packet is valid (RFC1812) */
+ if (is_valid_ipv4_pkt(ipv4_hdr, pkt->pkt.pkt_len) >= 0) {
+
+ /* Update time to live and header checksum */
+ --(ipv4_hdr->time_to_live);
+ ++(ipv4_hdr->hdr_checksum);
+
+ /* Fill acl structure */
+ acl->data_ipv4[acl->num_ipv4] = MBUF_IPV4_2PROTO(pkt);
+ acl->m_ipv4[(acl->num_ipv4)++] = pkt;
+
+ } else {
+ /* Not a valid IPv4 packet */
+ rte_pktmbuf_free(pkt);
+ }
+
+ } else if (type == PKT_RX_IPV6_HDR) {
+
+ /* Fill acl structure */
+ acl->data_ipv6[acl->num_ipv6] = MBUF_IPV6_2PROTO(pkt);
+ acl->m_ipv6[(acl->num_ipv6)++] = pkt;
+
+ } else {
+ /* Unknown type, drop the packet */
+ rte_pktmbuf_free(pkt);
+ }
+}
+
+#else
+static inline void
+prepare_one_packet(struct rte_mbuf **pkts_in, struct acl_search_t *acl,
+ int index)
+{
+ struct rte_mbuf *pkt = pkts_in[index];
+
+ int type = pkt->ol_flags & (PKT_RX_IPV4_HDR | PKT_RX_IPV6_HDR);
+
+ if (type == PKT_RX_IPV4_HDR) {
+
+ /* Fill acl structure */
+ acl->data_ipv4[acl->num_ipv4] = MBUF_IPV4_2PROTO(pkt);
+ acl->m_ipv4[(acl->num_ipv4)++] = pkt;
+
+
+ } else if (type == PKT_RX_IPV6_HDR) {
+
+ /* Fill acl structure */
+ acl->data_ipv6[acl->num_ipv6] = MBUF_IPV6_2PROTO(pkt);
+ acl->m_ipv6[(acl->num_ipv6)++] = pkt;
+ } else {
+ /* Unknown type, drop the packet */
+ rte_pktmbuf_free(pkt);
+ }
+}
+#endif /* DO_RFC_1812_CHECKS */
+
+static inline void
+prepare_acl_parameter(struct rte_mbuf **pkts_in, struct acl_search_t *acl,
+ int nb_rx)
+{
+ int i;
+
+ acl->num_ipv4 = 0;
+ acl->num_ipv6 = 0;
+
+ /* Prefetch first packets */
+ for (i = 0; i < PREFETCH_OFFSET && i < nb_rx; i++) {
+ rte_prefetch0(rte_pktmbuf_mtod(
+ pkts_in[i], void *));
+ }
+
+ for (i = 0; i < (nb_rx - PREFETCH_OFFSET); i++) {
+ rte_prefetch0(rte_pktmbuf_mtod(pkts_in[
+ i + PREFETCH_OFFSET], void *));
+ prepare_one_packet(pkts_in, acl, i);
+ }
+
+ /* Process left packets */
+ for (; i < nb_rx; i++)
+ prepare_one_packet(pkts_in, acl, i);
+}
+
+static inline void
+send_one_packet(struct rte_mbuf *m, uint32_t res)
+{
+ if (likely((res & ACL_DENY_SIGNATURE) == 0 && res != 0)) {
+ /* forward packets */
+ send_single_packet(m,
+ (uint8_t)(res - FWD_PORT_SHIFT));
+ } else{
+ /* in the ACL list, drop it */
+#ifdef L3FWDACL_DEBUG
+ if ((res & ACL_DENY_SIGNATURE) != 0) {
+ if (m->ol_flags & PKT_RX_IPV4_HDR)
+ dump_acl4_rule(m, res);
+ else
+ dump_acl6_rule(m, res);
+ }
+#endif
+ rte_pktmbuf_free(m);
+ }
+}
+
+
+
+static inline void
+send_packets(struct rte_mbuf **m, uint32_t *res, int num)
+{
+ int i;
+
+ /* Prefetch first packets */
+ for (i = 0; i < PREFETCH_OFFSET && i < num; i++) {
+ rte_prefetch0(rte_pktmbuf_mtod(
+ m[i], void *));
+ }
+
+ for (i = 0; i < (num - PREFETCH_OFFSET); i++) {
+ rte_prefetch0(rte_pktmbuf_mtod(m[
+ i + PREFETCH_OFFSET], void *));
+ send_one_packet(m[i], res[i]);
+ }
+
+ /* Process left packets */
+ for (; i < num; i++) {
+ send_one_packet(m[i], res[i]);
+ }
+
+}
+
+/*
+ * Parses IPV6 address, exepcts the following format:
+ * XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX:XXXX (where X - is a hexedecimal digit).
+ */
+static int
+parse_ipv6_addr(const char *in, const char **end, uint32_t v[IPV6_ADDR_U32],
+ char dlm)
+{
+ uint32_t addr[IPV6_ADDR_U16];
+
+ GET_CB_FIELD(in, addr[0], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[1], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[2], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[3], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[4], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[5], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[6], 16, UINT16_MAX, ':');
+ GET_CB_FIELD(in, addr[7], 16, UINT16_MAX, dlm);
+
+ *end = in;
+
+ v[0] = (addr[0] << 16) + addr[1];
+ v[1] = (addr[2] << 16) + addr[3];
+ v[2] = (addr[4] << 16) + addr[5];
+ v[3] = (addr[6] << 16) + addr[7];
+
+ return (0);
+}
+
+static int
+parse_ipv6_net(const char *in, struct rte_acl_field field[4])
+{
+ int32_t rc;
+ const char *mp;
+ uint32_t i, m, v[4];
+ const uint32_t nbu32 = sizeof(uint32_t) * CHAR_BIT;
+
+ /* get address. */
+ if ((rc = parse_ipv6_addr(in, &mp, v, '/')) != 0)
+ return (rc);
+
+ /* get mask. */
+ GET_CB_FIELD(mp, m, 0, CHAR_BIT * sizeof(v), 0);
+
+ /* put all together. */
+ for (i = 0; i != RTE_DIM(v); i++) {
+ if (m >= (i + 1) * nbu32)
+ field[i].mask_range.u32 = nbu32;
+ else
+ field[i].mask_range.u32 = m > (i * nbu32) ?
+ m - (i * 32) : 0;
+
+ field[i].value.u32 = v[i];
+ }
+
+ return (0);
+}
+
+static int
+parse_cb_ipv6_rule(char *str, struct rte_acl_rule *v, int has_userdata)
+{
+ int i, rc;
+ char *s, *sp, *in[CB_FLD_NUM];
+ static const char *dlm = " \t\n";
+ int dim = has_userdata ? CB_FLD_NUM : CB_FLD_USERDATA;
+ s = str;
+
+ for (i = 0; i != dim; i++, s = NULL) {
+ if ((in[i] = strtok_r(s, dlm, &sp)) == NULL)
+ return (-EINVAL);
+ }
+
+ if ((rc = parse_ipv6_net(in[CB_FLD_SRC_ADDR],
+ v->field + SRC1_FIELD_IPV6)) != 0) {
+ acl_log("failed to read source address/mask: %s\n",
+ in[CB_FLD_SRC_ADDR]);
+ return (rc);
+ }
+
+ if ((rc = parse_ipv6_net(in[CB_FLD_DST_ADDR],
+ v->field + DST1_FIELD_IPV6)) != 0) {
+ acl_log("failed to read destination address/mask: %s\n",
+ in[CB_FLD_DST_ADDR]);
+ return (rc);
+ }
+
+ /* source port. */
+ GET_CB_FIELD(in[CB_FLD_SRC_PORT_LOW],
+ v->field[SRCP_FIELD_IPV6].value.u16,
+ 0, UINT16_MAX, 0);
+ GET_CB_FIELD(in[CB_FLD_SRC_PORT_HIGH],
+ v->field[SRCP_FIELD_IPV6].mask_range.u16,
+ 0, UINT16_MAX, 0);
+
+ if (strncmp(in[CB_FLD_SRC_PORT_DLM], cb_port_delim,
+ sizeof(cb_port_delim)) != 0)
+ return (-EINVAL);
+
+ /* destination port. */
+ GET_CB_FIELD(in[CB_FLD_DST_PORT_LOW],
+ v->field[DSTP_FIELD_IPV6].value.u16,
+ 0, UINT16_MAX, 0);
+ GET_CB_FIELD(in[CB_FLD_DST_PORT_HIGH],
+ v->field[DSTP_FIELD_IPV6].mask_range.u16,
+ 0, UINT16_MAX, 0);
+
+ if (strncmp(in[CB_FLD_DST_PORT_DLM], cb_port_delim,
+ sizeof(cb_port_delim)) != 0)
+ return (-EINVAL);
+
+ if (v->field[SRCP_FIELD_IPV6].mask_range.u16
+ < v->field[SRCP_FIELD_IPV6].value.u16
+ || v->field[DSTP_FIELD_IPV6].mask_range.u16
+ < v->field[DSTP_FIELD_IPV6].value.u16)
+ return (-EINVAL);
+
+ GET_CB_FIELD(in[CB_FLD_PROTO], v->field[PROTO_FIELD_IPV6].value.u8,
+ 0, UINT8_MAX, '/');
+ GET_CB_FIELD(in[CB_FLD_PROTO], v->field[PROTO_FIELD_IPV6].mask_range.u8,
+ 0, UINT8_MAX, 0);
+
+ if (has_userdata)
+ GET_CB_FIELD(in[CB_FLD_USERDATA], v->data.userdata,
+ 0, UINT32_MAX, 0);
+
+ return (0);
+}
+
+/*
+ * Parse ClassBench rules file.
+ * Expected format:
+ * '@'<src_ipv4_addr>'/'<masklen> <space> \
+ * <dst_ipv4_addr>'/'<masklen> <space> \
+ * <src_port_low> <space> ":" <src_port_high> <space> \
+ * <dst_port_low> <space> ":" <dst_port_high> <space> \
+ * <proto>'/'<mask>
+ */
+static int
+parse_ipv4_net(const char *in, uint32_t *addr, uint32_t *mask_len)
+{
+ uint8_t a, b, c, d, m;
+
+ GET_CB_FIELD(in, a, 0, UINT8_MAX, '.');
+ GET_CB_FIELD(in, b, 0, UINT8_MAX, '.');
+ GET_CB_FIELD(in, c, 0, UINT8_MAX, '.');
+ GET_CB_FIELD(in, d, 0, UINT8_MAX, '/');
+ GET_CB_FIELD(in, m, 0, sizeof(uint32_t) * CHAR_BIT, 0);
+
+ addr[0] = IPv4(a, b, c, d);
+ mask_len[0] = m;
+
+ return (0);
+}
+
+static int
+parse_cb_ipv4vlan_rule(char *str, struct rte_acl_rule *v, int has_userdata)
+{
+ int i, rc;
+ char *s, *sp, *in[CB_FLD_NUM];
+ static const char *dlm = " \t\n";
+ int dim = has_userdata ? CB_FLD_NUM : CB_FLD_USERDATA;
+ s = str;
+ for (i = 0; i != dim; i++, s = NULL) {
+ if ((in[i] = strtok_r(s, dlm, &sp)) == NULL)
+ return (-EINVAL);
+ }
+
+ if ((rc = parse_ipv4_net(in[CB_FLD_SRC_ADDR],
+ &v->field[SRC_FIELD_IPV4].value.u32,
+ &v->field[SRC_FIELD_IPV4].mask_range.u32)) != 0) {
+ acl_log("failed to read source address/mask: %s\n",
+ in[CB_FLD_SRC_ADDR]);
+ return (rc);
+ }
+
+ if ((rc = parse_ipv4_net(in[CB_FLD_DST_ADDR],
+ &v->field[DST_FIELD_IPV4].value.u32,
+ &v->field[DST_FIELD_IPV4].mask_range.u32)) != 0) {
+ acl_log("failed to read destination address/mask: %s\n",
+ in[CB_FLD_DST_ADDR]);
+ return (rc);
+ }
+
+ GET_CB_FIELD(in[CB_FLD_SRC_PORT_LOW],
+ v->field[SRCP_FIELD_IPV4].value.u16,
+ 0, UINT16_MAX, 0);
+ GET_CB_FIELD(in[CB_FLD_SRC_PORT_HIGH],
+ v->field[SRCP_FIELD_IPV4].mask_range.u16,
+ 0, UINT16_MAX, 0);
+
+ if (strncmp(in[CB_FLD_SRC_PORT_DLM], cb_port_delim,
+ sizeof(cb_port_delim)) != 0)
+ return (-EINVAL);
+
+ GET_CB_FIELD(in[CB_FLD_DST_PORT_LOW],
+ v->field[DSTP_FIELD_IPV4].value.u16,
+ 0, UINT16_MAX, 0);
+ GET_CB_FIELD(in[CB_FLD_DST_PORT_HIGH],
+ v->field[DSTP_FIELD_IPV4].mask_range.u16,
+ 0, UINT16_MAX, 0);
+
+ if (strncmp(in[CB_FLD_DST_PORT_DLM], cb_port_delim,
+ sizeof(cb_port_delim)) != 0)
+ return (-EINVAL);
+
+ if (v->field[SRCP_FIELD_IPV4].mask_range.u16
+ < v->field[SRCP_FIELD_IPV4].value.u16
+ || v->field[DSTP_FIELD_IPV4].mask_range.u16
+ < v->field[DSTP_FIELD_IPV4].value.u16)
+ return (-EINVAL);
+
+ GET_CB_FIELD(in[CB_FLD_PROTO], v->field[PROTO_FIELD_IPV4].value.u8,
+ 0, UINT8_MAX, '/');
+ GET_CB_FIELD(in[CB_FLD_PROTO], v->field[PROTO_FIELD_IPV4].mask_range.u8,
+ 0, UINT8_MAX, 0);
+
+ if (has_userdata)
+ GET_CB_FIELD(in[CB_FLD_USERDATA], v->data.userdata, 0,
+ UINT32_MAX, 0);
+
+ return (0);
+}
+
+static int
+add_rules(const char *rule_path,
+ struct rte_acl_rule **proute_base,
+ unsigned int *proute_num,
+ struct rte_acl_rule **pacl_base,
+ unsigned int *pacl_num, uint32_t rule_size,
+ int (*parser)(char *, struct rte_acl_rule*, int))
+{
+ uint8_t *acl_rules, *route_rules;
+ struct rte_acl_rule *next;
+ unsigned int acl_num = 0, route_num = 0, total_num = 0;
+ unsigned int acl_cnt = 0, route_cnt = 0;
+ char buff[LINE_MAX];
+ FILE *fh = fopen(rule_path, "rb");
+ unsigned int i = 0;
+
+ if (fh == NULL)
+ rte_exit(EXIT_FAILURE, "%s: Open %s failed\n", __func__,
+ rule_path);
+
+ while ((fgets(buff, LINE_MAX, fh) != NULL)) {
+ if (buff[0] == ROUTE_LEAD_CHAR)
+ route_num++;
+ else if (buff[0] == ACL_LEAD_CHAR)
+ acl_num++;
+ }
+
+ if (0 == route_num)
+ rte_exit(EXIT_FAILURE, "Not find any route entries in %s!\n",
+ rule_path);
+
+ fseek(fh, 0, SEEK_SET);
+
+ acl_rules = (uint8_t *)calloc(acl_num, rule_size);
+
+ if (NULL == acl_rules)
+ rte_exit(EXIT_FAILURE, "%s: failed to malloc memory\n",
+ __func__);
+
+ route_rules = (uint8_t *)calloc(route_num, rule_size);
+
+ if (NULL == route_rules)
+ rte_exit(EXIT_FAILURE, "%s: failed to malloc memory\n",
+ __func__);
+
+ i = 0;
+ while (fgets(buff, LINE_MAX, fh) != NULL) {
+ i++;
+
+ if (is_bypass_line(buff))
+ continue;
+
+ char s = buff[0];
+
+ /* Route entry */
+ if (s == ROUTE_LEAD_CHAR)
+ next = (struct rte_acl_rule *)(route_rules +
+ route_cnt * rule_size);
+
+ /* ACL entry */
+ else if (s == ACL_LEAD_CHAR)
+ next = (struct rte_acl_rule *)(acl_rules +
+ acl_cnt * rule_size);
+
+ /* Illegal line */
+ else
+ rte_exit(EXIT_FAILURE,
+ "%s Line %u: should start with leading "
+ "char %c or %c\n",
+ rule_path, i, ROUTE_LEAD_CHAR, ACL_LEAD_CHAR);
+
+ if (parser(buff + 1, next, s == ROUTE_LEAD_CHAR) != 0)
+ rte_exit(EXIT_FAILURE,
+ "%s Line %u: parse rules error\n",
+ rule_path, i);
+
+ if (s == ROUTE_LEAD_CHAR) {
+ /* Check the forwarding port number */
+ if ((enabled_port_mask & (1 << next->data.userdata)) ==
+ 0)
+ rte_exit(EXIT_FAILURE,
+ "%s Line %u: fwd number illegal:%u\n",
+ rule_path, i, next->data.userdata);
+ next->data.userdata += FWD_PORT_SHIFT;
+ route_cnt++;
+ } else {
+ next->data.userdata = ACL_DENY_SIGNATURE + acl_cnt;
+ acl_cnt++;
+ }
+
+ next->data.priority = RTE_ACL_MAX_PRIORITY - total_num;
+ next->data.category_mask = -1;
+ total_num++;
+ }
+
+ fclose(fh);
+
+ *pacl_base = (struct rte_acl_rule *)acl_rules;
+ *pacl_num = acl_num;
+ *proute_base = (struct rte_acl_rule *)route_rules;
+ *proute_num = route_cnt;
+
+ return 0;
+}
+
+static void
+dump_acl_config(void)
+{
+ printf("ACL option are:\n");
+ printf(OPTION_RULE_IPV4": %s\n", parm_config.rule_ipv4_name);
+ printf(OPTION_RULE_IPV6": %s\n", parm_config.rule_ipv6_name);
+ printf(OPTION_SCALAR": %d\n", parm_config.scalar);
+}
+
+static int
+check_acl_config(void)
+{
+ if (parm_config.rule_ipv4_name == NULL) {
+ acl_log("ACL IPv4 rule file not specified\n");
+ return -1;
+ } else if (parm_config.rule_ipv6_name == NULL) {
+ acl_log("ACL IPv6 rule file not specified\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+static struct rte_acl_ctx*
+setup_acl(struct rte_acl_rule *route_base,
+ struct rte_acl_rule *acl_base, unsigned int route_num,
+ unsigned int acl_num, int ipv6, int socketid)
+{
+ char name[PATH_MAX];
+ struct rte_acl_param acl_param;
+ struct rte_acl_config acl_build_param;
+ struct rte_acl_ctx *context;
+ int dim = ipv6 ? RTE_DIM(ipv6_defs) : RTE_DIM(ipv4_defs);
+
+ /* Create ACL contexts */
+ rte_snprintf(name, sizeof(name), "%s%d",
+ ipv6 ? L3FWD_ACL_IPV6_NAME : L3FWD_ACL_IPV4_NAME,
+ socketid);
+
+ acl_param.name = name;
+ acl_param.socket_id = socketid;
+ acl_param.rule_size = RTE_ACL_RULE_SZ(dim);
+ acl_param.max_rule_num = MAX_ACL_RULE_NUM;
+
+ if ((context = rte_acl_create(&acl_param)) == NULL)
+ rte_exit(EXIT_FAILURE, "Failed to create ACL context\n");
+
+ if (rte_acl_add_rules(context, route_base, route_num) < 0)
+ rte_exit(EXIT_FAILURE, "add rules failed\n");
+
+ if (rte_acl_add_rules(context, acl_base, acl_num) < 0)
+ rte_exit(EXIT_FAILURE, "add rules failed\n");
+
+ /* Perform builds */
+ acl_build_param.num_categories = DEFAULT_MAX_CATEGORIES;
+
+ acl_build_param.num_fields = dim;
+ memcpy(&acl_build_param.defs, ipv6 ? ipv6_defs : ipv4_defs,
+ ipv6 ? sizeof(ipv6_defs) : sizeof(ipv4_defs));
+
+ if (rte_acl_build(context, &acl_build_param) != 0)
+ rte_exit(EXIT_FAILURE, "Failed to build ACL trie\n");
+
+ rte_acl_dump(context);
+
+ return context;
+}
+
+static int
+app_acl_init(void)
+{
+ unsigned lcore_id ;
+ unsigned int i;
+ int socketid;
+ struct rte_acl_rule *acl_base_ipv4, *route_base_ipv4,
+ *acl_base_ipv6, *route_base_ipv6;
+ unsigned int acl_num_ipv4 = 0, route_num_ipv4 = 0,
+ acl_num_ipv6 = 0, route_num_ipv6 = 0;
+
+ if (check_acl_config() != 0)
+ rte_exit(EXIT_FAILURE, "Failed to get valid ACL options\n");
+
+ dump_acl_config();
+
+ /* Load rules from the input file */
+ if (add_rules(parm_config.rule_ipv4_name, &route_base_ipv4,
+ &route_num_ipv4, &acl_base_ipv4, &acl_num_ipv4,
+ sizeof(struct acl4_rule), &parse_cb_ipv4vlan_rule) < 0)
+ rte_exit(EXIT_FAILURE, "Failed to add rules\n");
+
+ acl_log("IPv4 Route entries %u:\n", route_num_ipv4);
+ dump_ipv4_rules((struct acl4_rule *)route_base_ipv4, route_num_ipv4, 1);
+
+ acl_log("IPv4 ACL entries %u:\n", acl_num_ipv4);
+ dump_ipv4_rules((struct acl4_rule *)acl_base_ipv4, acl_num_ipv4, 1);
+
+ if (add_rules(parm_config.rule_ipv6_name, &route_base_ipv6,
+ &route_num_ipv6,
+ &acl_base_ipv6, &acl_num_ipv6,
+ sizeof(struct acl6_rule), &parse_cb_ipv6_rule) < 0)
+ rte_exit(EXIT_FAILURE, "Failed to add rules\n");
+
+ acl_log("IPv6 Route entries %u:\n", route_num_ipv6);
+ dump_ipv6_rules((struct acl6_rule *)route_base_ipv6, route_num_ipv6, 1);
+
+ acl_log("IPv6 ACL entries %u:\n", acl_num_ipv6);
+ dump_ipv6_rules((struct acl6_rule *)acl_base_ipv6, acl_num_ipv6, 1);
+
+ memset(&acl_config, 0, sizeof(acl_config));
+
+ /* Check sockets a context should be created on */
+ if (!numa_on)
+ acl_config.mapped[0] = 1;
+ else {
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ socketid = rte_lcore_to_socket_id(lcore_id);
+ if (socketid >= NB_SOCKETS) {
+ acl_log("Socket %d of lcore %u is out "
+ "of range %d\n",
+ socketid, lcore_id, NB_SOCKETS);
+ return -1;
+ }
+
+ acl_config.mapped[socketid] = 1;
+ }
+ }
+
+ for (i = 0; i < NB_SOCKETS; i++) {
+ if (acl_config.mapped[i]) {
+ acl_config.acx_ipv4[i] = setup_acl(route_base_ipv4,
+ acl_base_ipv4, route_num_ipv4, acl_num_ipv4,
+ 0, i);
+
+ acl_config.acx_ipv6[i] = setup_acl(route_base_ipv6,
+ acl_base_ipv6, route_num_ipv6, acl_num_ipv6,
+ 1, i);
+ }
+ }
+
+ free(route_base_ipv4);
+ free(route_base_ipv6);
+
+#ifdef L3FWDACL_DEBUG
+ acl_config.rule_ipv4 = (struct acl4_rule *)acl_base_ipv4;
+ acl_config.rule_ipv6 = (struct acl6_rule *)acl_base_ipv6;
+#else
+ free(acl_base_ipv4);
+ free(acl_base_ipv6);
+#endif
+
+ return 0;
+}
+
+/***********************end of ACL part******************************/
+
+struct lcore_conf {
+ uint16_t n_rx_queue;
+ struct lcore_rx_queue rx_queue_list[MAX_RX_QUEUE_PER_LCORE];
+ uint16_t tx_queue_id[RTE_MAX_ETHPORTS];
+ struct mbuf_table tx_mbufs[RTE_MAX_ETHPORTS];
+} __rte_cache_aligned;
+
+static struct lcore_conf lcore_conf[RTE_MAX_LCORE];
+
+/* Send burst of packets on an output interface */
+static inline int
+send_burst(struct lcore_conf *qconf, uint16_t n, uint8_t port)
+{
+ struct rte_mbuf **m_table;
+ int ret;
+ uint16_t queueid;
+
+ queueid = qconf->tx_queue_id[port];
+ m_table = (struct rte_mbuf **)qconf->tx_mbufs[port].m_table;
+
+ ret = rte_eth_tx_burst(port, queueid, m_table, n);
+ if (unlikely(ret < n)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < n);
+ }
+
+ return 0;
+}
+
+/* Enqueue a single packet, and send burst if queue is filled */
+static inline int
+send_single_packet(struct rte_mbuf *m, uint8_t port)
+{
+ uint32_t lcore_id;
+ uint16_t len;
+ struct lcore_conf *qconf;
+
+ lcore_id = rte_lcore_id();
+
+ qconf = &lcore_conf[lcore_id];
+ len = qconf->tx_mbufs[port].len;
+ qconf->tx_mbufs[port].m_table[len] = m;
+ len++;
+
+ /* enough pkts to be sent */
+ if (unlikely(len == MAX_PKT_BURST)) {
+ send_burst(qconf, MAX_PKT_BURST, port);
+ len = 0;
+ }
+
+ qconf->tx_mbufs[port].len = len;
+ return 0;
+}
+
+#ifdef DO_RFC_1812_CHECKS
+static inline int
+is_valid_ipv4_pkt(struct ipv4_hdr *pkt, uint32_t link_len)
+{
+ /* From http://www.rfc-editor.org/rfc/rfc1812.txt section 5.2.2 */
+ /*
+ * 1. The packet length reported by the Link Layer must be large
+ * enough to hold the minimum length legal IP datagram (20 bytes).
+ */
+ if (link_len < sizeof(struct ipv4_hdr))
+ return -1;
+
+ /* 2. The IP checksum must be correct. */
+ /* this is checked in H/W */
+
+ /*
+ * 3. The IP version number must be 4. If the version number is not 4
+ * then the packet may be another version of IP, such as IPng or
+ * ST-II.
+ */
+ if (((pkt->version_ihl) >> 4) != 4)
+ return -3;
+ /*
+ * 4. The IP header length field must be large enough to hold the
+ * minimum length legal IP datagram (20 bytes = 5 words).
+ */
+ if ((pkt->version_ihl & 0xf) < 5)
+ return -4;
+
+ /*
+ * 5. The IP total length field must be large enough to hold the IP
+ * datagram header, whose length is specified in the IP header length
+ * field.
+ */
+ if (rte_cpu_to_be_16(pkt->total_length) < sizeof(struct ipv4_hdr))
+ return -5;
+
+ return 0;
+}
+#endif
+
+/* main processing loop */
+static int
+main_loop(__attribute__((unused)) void *dummy)
+{
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ unsigned lcore_id;
+ uint64_t prev_tsc, diff_tsc, cur_tsc;
+ int i, nb_rx;
+ uint8_t portid, queueid;
+ struct lcore_conf *qconf;
+ int socketid;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1)
+ / US_PER_S * BURST_TX_DRAIN_US;
+ int scalar = parm_config.scalar;
+
+ prev_tsc = 0;
+
+ lcore_id = rte_lcore_id();
+ qconf = &lcore_conf[lcore_id];
+ socketid = rte_lcore_to_socket_id(lcore_id);
+
+ if (qconf->n_rx_queue == 0) {
+ RTE_LOG(INFO, L3FWD, "lcore %u has nothing to do\n", lcore_id);
+ return 0;
+ }
+
+ RTE_LOG(INFO, L3FWD, "entering main loop on lcore %u\n", lcore_id);
+
+ for (i = 0; i < qconf->n_rx_queue; i++) {
+
+ portid = qconf->rx_queue_list[i].port_id;
+ queueid = qconf->rx_queue_list[i].queue_id;
+ RTE_LOG(INFO, L3FWD,
+ " -- lcoreid=%u portid=%hhu rxqueueid=%hhu\n",
+ lcore_id, portid, queueid);
+ }
+
+ while (1) {
+
+ cur_tsc = rte_rdtsc();
+
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ /*
+ * This could be optimized (use queueid instead of
+ * portid), but it is not called so often
+ */
+ for (portid = 0; portid < RTE_MAX_ETHPORTS; portid++) {
+ if (qconf->tx_mbufs[portid].len == 0)
+ continue;
+ send_burst(&lcore_conf[lcore_id],
+ qconf->tx_mbufs[portid].len,
+ portid);
+ qconf->tx_mbufs[portid].len = 0;
+ }
+
+ prev_tsc = cur_tsc;
+ }
+
+ /*
+ * Read packet from RX queues
+ */
+ for (i = 0; i < qconf->n_rx_queue; ++i) {
+
+ portid = qconf->rx_queue_list[i].port_id;
+ queueid = qconf->rx_queue_list[i].queue_id;
+ nb_rx = rte_eth_rx_burst(portid, queueid,
+ pkts_burst, MAX_PKT_BURST);
+
+ if (nb_rx > 0) {
+ struct acl_search_t acl_search;
+
+ prepare_acl_parameter(pkts_burst, &acl_search,
+ nb_rx);
+
+ if (acl_search.num_ipv4) {
+ CLASSIFY(acl_config.acx_ipv4[socketid],
+ acl_search.data_ipv4,
+ acl_search.res_ipv4,
+ acl_search.num_ipv4,
+ DEFAULT_MAX_CATEGORIES);
+
+ send_packets(acl_search.m_ipv4,
+ acl_search.res_ipv4,
+ acl_search.num_ipv4);
+ }
+
+ if (acl_search.num_ipv6) {
+ CLASSIFY(acl_config.acx_ipv6[socketid],
+ acl_search.data_ipv6,
+ acl_search.res_ipv6,
+ acl_search.num_ipv6,
+ DEFAULT_MAX_CATEGORIES);
+
+ send_packets(acl_search.m_ipv6,
+ acl_search.res_ipv6,
+ acl_search.num_ipv6);
+ }
+ }
+ }
+ }
+}
+
+static int
+check_lcore_params(void)
+{
+ uint8_t queue, lcore;
+ uint16_t i;
+ int socketid;
+
+ for (i = 0; i < nb_lcore_params; ++i) {
+ queue = lcore_params[i].queue_id;
+ if (queue >= MAX_RX_QUEUE_PER_PORT) {
+ printf("invalid queue number: %hhu\n", queue);
+ return -1;
+ }
+ lcore = lcore_params[i].lcore_id;
+ if (!rte_lcore_is_enabled(lcore)) {
+ printf("error: lcore %hhu is not enabled in "
+ "lcore mask\n", lcore);
+ return -1;
+ }
+ if ((socketid = rte_lcore_to_socket_id(lcore) != 0) &&
+ (numa_on == 0)) {
+ printf("warning: lcore %hhu is on socket %d "
+ "with numa off\n",
+ lcore, socketid);
+ }
+ }
+ return 0;
+}
+
+static int
+check_port_config(const unsigned nb_ports)
+{
+ unsigned portid;
+ uint16_t i;
+
+ for (i = 0; i < nb_lcore_params; ++i) {
+ portid = lcore_params[i].port_id;
+
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ printf("port %u is not enabled in port mask\n", portid);
+ return -1;
+ }
+ if (portid >= nb_ports) {
+ printf("port %u is not present on the board\n", portid);
+ return -1;
+ }
+ }
+ return 0;
+}
+
+static uint8_t
+get_port_n_rx_queues(const uint8_t port)
+{
+ int queue = -1;
+ uint16_t i;
+
+ for (i = 0; i < nb_lcore_params; ++i) {
+ if (lcore_params[i].port_id == port &&
+ lcore_params[i].queue_id > queue)
+ queue = lcore_params[i].queue_id;
+ }
+ return (uint8_t)(++queue);
+}
+
+static int
+init_lcore_rx_queues(void)
+{
+ uint16_t i, nb_rx_queue;
+ uint8_t lcore;
+
+ for (i = 0; i < nb_lcore_params; ++i) {
+ lcore = lcore_params[i].lcore_id;
+ nb_rx_queue = lcore_conf[lcore].n_rx_queue;
+ if (nb_rx_queue >= MAX_RX_QUEUE_PER_LCORE) {
+ printf("error: too many queues (%u) for lcore: %u\n",
+ (unsigned)nb_rx_queue + 1, (unsigned)lcore);
+ return -1;
+ } else {
+ lcore_conf[lcore].rx_queue_list[nb_rx_queue].port_id =
+ lcore_params[i].port_id;
+ lcore_conf[lcore].rx_queue_list[nb_rx_queue].queue_id =
+ lcore_params[i].queue_id;
+ lcore_conf[lcore].n_rx_queue++;
+ }
+ }
+ return 0;
+}
+
+/* display usage */
+static void
+print_usage(const char *prgname)
+{
+ printf("%s [EAL options] -- -p PORTMASK -P"
+ "--"OPTION_RULE_IPV4"=FILE"
+ "--"OPTION_RULE_IPV6"=FILE"
+ " [--"OPTION_CONFIG" (port,queue,lcore)[,(port,queue,lcore]]"
+ " [--"OPTION_ENBJMO" [--max-pkt-len PKTLEN]]\n"
+ " -p PORTMASK: hexadecimal bitmask of ports to configure\n"
+ " -P : enable promiscuous mode\n"
+ " --"OPTION_CONFIG": (port,queue,lcore): "
+ "rx queues configuration\n"
+ " --"OPTION_NONUMA": optional, disable numa awareness\n"
+ " --"OPTION_ENBJMO": enable jumbo frame"
+ " which max packet len is PKTLEN in decimal (64-9600)\n"
+ " --"OPTION_RULE_IPV4"=FILE: specify the ipv4 rules entries "
+ "file. "
+ "Each rule occupy one line. "
+ "2 kinds of rules are supported. "
+ "One is ACL entry at while line leads with character '%c', "
+ "another is route entry at while line leads with "
+ "character '%c'.\n"
+ " --"OPTION_RULE_IPV6"=FILE: specify the ipv6 rules "
+ "entries file.\n"
+ " --"OPTION_SCALAR": Use scalar function to do lookup\n",
+ prgname, ACL_LEAD_CHAR, ROUTE_LEAD_CHAR);
+}
+
+static int
+parse_max_pkt_len(const char *pktlen)
+{
+ char *end = NULL;
+ unsigned long len;
+
+ /* parse decimal string */
+ len = strtoul(pktlen, &end, 10);
+ if ((pktlen[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (len == 0)
+ return -1;
+
+ return len;
+}
+
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0'))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+}
+
+static int
+parse_config(const char *q_arg)
+{
+ char s[256];
+ const char *p, *p0 = q_arg;
+ char *end;
+ enum fieldnames {
+ FLD_PORT = 0,
+ FLD_QUEUE,
+ FLD_LCORE,
+ _NUM_FLD
+ };
+ unsigned long int_fld[_NUM_FLD];
+ char *str_fld[_NUM_FLD];
+ int i;
+ unsigned size;
+
+ nb_lcore_params = 0;
+
+ while ((p = strchr(p0, '(')) != NULL) {
+ ++p;
+ if ((p0 = strchr(p, ')')) == NULL)
+ return -1;
+
+ size = p0 - p;
+ if (size >= sizeof(s))
+ return -1;
+
+ rte_snprintf(s, sizeof(s), "%.*s", size, p);
+ if (rte_strsplit(s, sizeof(s), str_fld, _NUM_FLD, ',') !=
+ _NUM_FLD)
+ return -1;
+ for (i = 0; i < _NUM_FLD; i++) {
+ errno = 0;
+ int_fld[i] = strtoul(str_fld[i], &end, 0);
+ if (errno != 0 || end == str_fld[i] || int_fld[i] > 255)
+ return -1;
+ }
+ if (nb_lcore_params >= MAX_LCORE_PARAMS) {
+ printf("exceeded max number of lcore params: %hu\n",
+ nb_lcore_params);
+ return -1;
+ }
+ lcore_params_array[nb_lcore_params].port_id =
+ (uint8_t)int_fld[FLD_PORT];
+ lcore_params_array[nb_lcore_params].queue_id =
+ (uint8_t)int_fld[FLD_QUEUE];
+ lcore_params_array[nb_lcore_params].lcore_id =
+ (uint8_t)int_fld[FLD_LCORE];
+ ++nb_lcore_params;
+ }
+ lcore_params = lcore_params_array;
+ return 0;
+}
+
+/* Parse the argument given in the command line of the application */
+static int
+parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ char **argvopt;
+ int option_index;
+ char *prgname = argv[0];
+ static struct option lgopts[] = {
+ {OPTION_CONFIG, 1, 0, 0},
+ {OPTION_NONUMA, 0, 0, 0},
+ {OPTION_ENBJMO, 0, 0, 0},
+ {OPTION_RULE_IPV4, 1, 0, 0},
+ {OPTION_RULE_IPV6, 1, 0, 0},
+ {OPTION_SCALAR, 0, 0, 0},
+ {NULL, 0, 0, 0}
+ };
+
+ argvopt = argv;
+
+ while ((opt = getopt_long(argc, argvopt, "p:P",
+ lgopts, &option_index)) != EOF) {
+
+ switch (opt) {
+ /* portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ printf("invalid portmask\n");
+ print_usage(prgname);
+ return -1;
+ }
+ break;
+ case 'P':
+ printf("Promiscuous mode selected\n");
+ promiscuous_on = 1;
+ break;
+
+ /* long options */
+ case 0:
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_CONFIG,
+ sizeof(OPTION_CONFIG))) {
+ ret = parse_config(optarg);
+ if (ret) {
+ printf("invalid config\n");
+ print_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_NONUMA,
+ sizeof(OPTION_NONUMA))) {
+ printf("numa is disabled\n");
+ numa_on = 0;
+ }
+
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_ENBJMO, sizeof(OPTION_ENBJMO))) {
+ struct option lenopts = {
+ "max-pkt-len",
+ required_argument,
+ 0,
+ 0
+ };
+
+ printf("jumbo frame is enabled\n");
+ port_conf.rxmode.jumbo_frame = 1;
+
+ /*
+ * if no max-pkt-len set, then use the
+ * default value ETHER_MAX_LEN
+ */
+ if (0 == getopt_long(argc, argvopt, "",
+ &lenopts, &option_index)) {
+ ret = parse_max_pkt_len(optarg);
+ if ((ret < 64) ||
+ (ret > MAX_JUMBO_PKT_LEN)) {
+ printf("invalid packet "
+ "length\n");
+ print_usage(prgname);
+ return -1;
+ }
+ port_conf.rxmode.max_rx_pkt_len = ret;
+ }
+ printf("set jumbo frame max packet length "
+ "to %u\n",
+ (unsigned int)
+ port_conf.rxmode.max_rx_pkt_len);
+ }
+
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_RULE_IPV4,
+ sizeof(OPTION_RULE_IPV4)))
+ parm_config.rule_ipv4_name = optarg;
+
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_RULE_IPV6,
+ sizeof(OPTION_RULE_IPV6))) {
+ parm_config.rule_ipv6_name = optarg;
+ }
+
+ if (!strncmp(lgopts[option_index].name,
+ OPTION_SCALAR, sizeof(OPTION_SCALAR)))
+ parm_config.scalar = 1;
+
+
+ break;
+
+ default:
+ print_usage(prgname);
+ return -1;
+ }
+ }
+
+ if (optind >= 0)
+ argv[optind-1] = prgname;
+
+ ret = optind-1;
+ optind = 0; /* reset getopt lib */
+ return ret;
+}
+
+static void
+print_ethaddr(const char *name, const struct ether_addr *eth_addr)
+{
+ printf("%s%02X:%02X:%02X:%02X:%02X:%02X", name,
+ eth_addr->addr_bytes[0],
+ eth_addr->addr_bytes[1],
+ eth_addr->addr_bytes[2],
+ eth_addr->addr_bytes[3],
+ eth_addr->addr_bytes[4],
+ eth_addr->addr_bytes[5]);
+}
+
+static int
+init_mem(unsigned nb_mbuf)
+{
+ int socketid;
+ unsigned lcore_id;
+ char s[64];
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ if (numa_on)
+ socketid = rte_lcore_to_socket_id(lcore_id);
+ else
+ socketid = 0;
+
+ if (socketid >= NB_SOCKETS) {
+ rte_exit(EXIT_FAILURE,
+ "Socket %d of lcore %u is out of range %d\n",
+ socketid, lcore_id, NB_SOCKETS);
+ }
+ if (pktmbuf_pool[socketid] == NULL) {
+ rte_snprintf(s, sizeof(s), "mbuf_pool_%d", socketid);
+ pktmbuf_pool[socketid] =
+ rte_mempool_create(s, nb_mbuf, MBUF_SIZE,
+ MEMPOOL_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ socketid, 0);
+ if (pktmbuf_pool[socketid] == NULL)
+ rte_exit(EXIT_FAILURE,
+ "Cannot init mbuf pool on socket %d\n",
+ socketid);
+ else
+ printf("Allocated mbuf pool on socket %d\n",
+ socketid);
+ }
+ }
+ return 0;
+}
+
+/* Check the link status of all ports in up to 9s, and print them finally */
+static void
+check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+{
+#define CHECK_INTERVAL 100 /* 100ms */
+#define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
+ uint8_t portid, count, all_ports_up, print_flag = 0;
+ struct rte_eth_link link;
+
+ printf("\nChecking link status");
+ fflush(stdout);
+ for (count = 0; count <= MAX_CHECK_TIME; count++) {
+ all_ports_up = 1;
+ for (portid = 0; portid < port_num; portid++) {
+ if ((port_mask & (1 << portid)) == 0)
+ continue;
+ memset(&link, 0, sizeof(link));
+ rte_eth_link_get_nowait(portid, &link);
+ /* print link status if flag set */
+ if (print_flag == 1) {
+ if (link.link_status)
+ printf("Port %d Link Up - speed %u "
+ "Mbps - %s\n", (uint8_t)portid,
+ (unsigned)link.link_speed,
+ (link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
+ ("full-duplex") : ("half-duplex\n"));
+ else
+ printf("Port %d Link Down\n",
+ (uint8_t)portid);
+ continue;
+ }
+ /* clear all_ports_up flag if any link down */
+ if (link.link_status == 0) {
+ all_ports_up = 0;
+ break;
+ }
+ }
+ /* after finally printing all link status, get out */
+ if (print_flag == 1)
+ break;
+
+ if (all_ports_up == 0) {
+ printf(".");
+ fflush(stdout);
+ rte_delay_ms(CHECK_INTERVAL);
+ }
+
+ /* set the print_flag if all ports up or timeout */
+ if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
+ print_flag = 1;
+ printf("done\n");
+ }
+ }
+}
+
+int
+MAIN(int argc, char **argv)
+{
+ struct lcore_conf *qconf;
+ int ret;
+ unsigned nb_ports;
+ uint16_t queueid;
+ unsigned lcore_id;
+ uint32_t n_tx_queue, nb_lcores;
+ uint8_t portid, nb_rx_queue, queue, socketid;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid EAL parameters\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse application arguments (after the EAL ones) */
+ ret = parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid L3FWD parameters\n");
+
+ if (check_lcore_params() < 0)
+ rte_exit(EXIT_FAILURE, "check_lcore_params failed\n");
+
+ ret = init_lcore_rx_queues();
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "init_lcore_rx_queues failed\n");
+
+ if (rte_eal_pci_probe() < 0)
+ rte_exit(EXIT_FAILURE, "Cannot probe PCI\n");
+
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ if (check_port_config(nb_ports) < 0)
+ rte_exit(EXIT_FAILURE, "check_port_config failed\n");
+
+ /* Add ACL rules and route entries, build trie */
+ if (app_acl_init() < 0)
+ rte_exit(EXIT_FAILURE, "app_acl_init failed\n");
+
+ nb_lcores = rte_lcore_count();
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ printf("\nSkipping disabled port %d\n", portid);
+ continue;
+ }
+
+ /* init port */
+ printf("Initializing port %d ... ", portid);
+ fflush(stdout);
+
+ nb_rx_queue = get_port_n_rx_queues(portid);
+ n_tx_queue = nb_lcores;
+ if (n_tx_queue > MAX_TX_QUEUE_PER_PORT)
+ n_tx_queue = MAX_TX_QUEUE_PER_PORT;
+ printf("Creating queues: nb_rxq=%d nb_txq=%u... ",
+ nb_rx_queue, (unsigned)n_tx_queue);
+ ret = rte_eth_dev_configure(portid, nb_rx_queue,
+ (uint16_t)n_tx_queue, &port_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot configure device: err=%d, port=%d\n",
+ ret, portid);
+
+ rte_eth_macaddr_get(portid, &ports_eth_addr[portid]);
+ print_ethaddr(" Address:", &ports_eth_addr[portid]);
+ printf(", ");
+
+ /* init memory */
+ ret = init_mem(NB_MBUF);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "init_mem failed\n");
+
+ /* init one TX queue per couple (lcore,port) */
+ queueid = 0;
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+
+ if (numa_on)
+ socketid = (uint8_t)
+ rte_lcore_to_socket_id(lcore_id);
+ else
+ socketid = 0;
+
+ printf("txq=%u,%d,%d ", lcore_id, queueid, socketid);
+ fflush(stdout);
+ ret = rte_eth_tx_queue_setup(portid, queueid, nb_txd,
+ socketid, &tx_conf);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_tx_queue_setup: err=%d, "
+ "port=%d\n", ret, portid);
+
+ qconf = &lcore_conf[lcore_id];
+ qconf->tx_queue_id[portid] = queueid;
+ queueid++;
+ }
+ printf("\n");
+ }
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++) {
+ if (rte_lcore_is_enabled(lcore_id) == 0)
+ continue;
+ qconf = &lcore_conf[lcore_id];
+ printf("\nInitializing rx queues on lcore %u ... ", lcore_id);
+ fflush(stdout);
+ /* init RX queues */
+ for (queue = 0; queue < qconf->n_rx_queue; ++queue) {
+ portid = qconf->rx_queue_list[queue].port_id;
+ queueid = qconf->rx_queue_list[queue].queue_id;
+
+ if (numa_on)
+ socketid = (uint8_t)
+ rte_lcore_to_socket_id(lcore_id);
+ else
+ socketid = 0;
+
+ printf("rxq=%d,%d,%d ", portid, queueid, socketid);
+ fflush(stdout);
+
+ ret = rte_eth_rx_queue_setup(portid, queueid, nb_rxd,
+ socketid, &rx_conf,
+ pktmbuf_pool[socketid]);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_rx_queue_setup: err=%d,"
+ "port=%d\n", ret, portid);
+ }
+ }
+
+ printf("\n");
+
+ /* start ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ continue;
+ }
+ /* Start device */
+ ret = rte_eth_dev_start(portid);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE,
+ "rte_eth_dev_start: err=%d, port=%d\n",
+ ret, portid);
+
+ /*
+ * If enabled, put device in promiscuous mode.
+ * This allows IO forwarding mode to forward packets
+ * to itself through 2 cross-connected ports of the
+ * target machine.
+ */
+ if (promiscuous_on)
+ rte_eth_promiscuous_enable(portid);
+ }
+
+ check_all_ports_link_status((uint8_t)nb_ports, enabled_port_mask);
+
+ /* launch per-lcore init on every lcore */
+ rte_eal_mp_remote_launch(main_loop, NULL, CALL_MASTER);
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ if (rte_eal_wait_lcore(lcore_id) < 0)
+ return -1;
+ }
+
+ return 0;
+}
diff --git a/examples/l3fwd-acl/main.h b/examples/l3fwd-acl/main.h
new file mode 100644
index 0000000..f54938b
--- /dev/null
+++ b/examples/l3fwd-acl/main.h
@@ -0,0 +1,45 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+int MAIN(int argc, char **argv);
+
+#endif /* _MAIN_H_ */
--
1.7.7.6
next prev parent reply other threads:[~2014-06-13 11:27 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-06-13 11:26 [dpdk-dev] [PATCHv3 0/5] ACL library Konstantin Ananyev
2014-06-13 11:26 ` [dpdk-dev] [PATCHv3 1/5] Add ACL library (librte_acl) into DPDK Konstantin Ananyev
2014-06-13 11:26 ` [dpdk-dev] [PATCHv3 2/5] acl: update UT to reflect latest changes in the librte_acl Konstantin Ananyev
2014-06-13 11:26 ` [dpdk-dev] [PATCHv3 3/5] acl: New test-acl application Konstantin Ananyev
2014-06-13 11:26 ` Konstantin Ananyev [this message]
2014-06-13 11:26 ` [dpdk-dev] [PATCHv3 5/5] acl: add doxygen configuration and start page Konstantin Ananyev
2014-06-13 11:56 ` [dpdk-dev] [PATCHv3 0/5] ACL library Thomas Monjalon
2014-06-13 12:02 ` Ananyev, Konstantin
2014-06-13 23:38 ` Thomas Monjalon
2014-06-14 0:07 ` Richardson, Bruce
2014-06-14 7:55 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1402658814-21881-5-git-send-email-konstantin.ananyev@intel.com \
--to=konstantin.ananyev@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).