[dpdk-dev] [PATCH 00/10] igb_uio related patches

[dpdk-dev] [PATCH 00/10] igb_uio related patches

[Stephen Hemminger]

Update patches so all are now bisectable, and incorporate comments.
Also fix the checkpatch warnings that are fixable.

[dpdk-dev] [PATCH 01/10] igb_uio: use kernel standard log message

[Stephen Hemminger]

[-- Attachment #1: igb_uio-msg.patch --]
[-- Type: text/plain, Size: 3195 bytes --]

Use Linux kernel standard coding conventions for console messages.
Bare use of printk() is not desirable and is reported as a style
problem by checkpatch. Instead use pr_info() and dev_info()
to print out log messages where appropriate.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:29:03.435405487 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:59:18.000000000 -0700
@@ -22,6 +22,8 @@
  *   Intel Corporation
  */
 
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -394,7 +396,7 @@ done:
 	pci_unlock(pdev);
 spin_unlock:
 	spin_unlock_irqrestore(&udev->lock, flags);
-	printk(KERN_INFO "irq 0x%x %s\n", irq, (ret == IRQ_HANDLED) ? "handled" : "not handled");
+	pr_info("irq 0x%x %s\n", irq, (ret == IRQ_HANDLED) ? "handled" : "not handled");
 
 	return ret;
 }
@@ -557,7 +559,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	 * memory
 	 */
 	if (pci_enable_device(dev)) {
-		printk(KERN_ERR "Cannot enable PCI device\n");
+		dev_err(&dev->dev, "Cannot enable PCI device\n");
 		goto fail_free;
 	}
 
@@ -566,7 +568,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	 * module
 	 */
 	if (pci_request_regions(dev, "igb_uio")) {
-		printk(KERN_ERR "Cannot request regions\n");
+		dev_err(&dev->dev, "Cannot request regions\n");
 		goto fail_disable;
 	}
 
@@ -579,10 +581,10 @@ igbuio_pci_probe(struct pci_dev *dev, co
 
 	/* set 64-bit DMA mask */
 	if (pci_set_dma_mask(dev,  DMA_BIT_MASK(64))) {
-		printk(KERN_ERR "Cannot set DMA mask\n");
+		dev_err(&dev->dev, "Cannot set DMA mask\n");
 		goto fail_release_iomem;
 	} else if (pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64))) {
-		printk(KERN_ERR "Cannot set consistent DMA mask\n");
+		dev_err(&dev->dev, "Cannot set consistent DMA mask\n");
 		goto fail_release_iomem;
 	}
 
@@ -613,7 +615,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 		}
 		else {
 			pci_disable_msix(udev->pdev);
-			printk(KERN_INFO "fail to enable pci msix, or not enough msix entries\n");
+			pr_info("fail to enable pci msix, or not enough msix entries\n");
 		}
 	}
 	switch (udev->mode) {
@@ -665,7 +667,7 @@ igbuio_pci_remove(struct pci_dev *dev)
 	struct uio_info *info = pci_get_drvdata(dev);
 
 	if (info->priv == NULL) {
-		printk(KERN_DEBUG "Not igbuio device\n");
+		pr_notice("Not igbuio device\n");
 		return;
 	}
 
@@ -685,18 +687,18 @@ static int
 igbuio_config_intr_mode(char *intr_str)
 {
 	if (!intr_str) {
-		printk(KERN_INFO "Use MSIX interrupt by default\n");
+		pr_info("Use MSIX interrupt by default\n");
 		return 0;
 	}
 
 	if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
-		printk(KERN_INFO "Use MSIX interrupt\n");
+		pr_info("Use MSIX interrupt\n");
 	} else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY;
-		printk(KERN_INFO "Use legacy interrupt\n");
+		pr_info("Use legacy interrupt\n");
 	} else {
-		printk(KERN_INFO "Error: bad parameter - %s\n", intr_str);
+		pr_info("Error: bad parameter - %s\n", intr_str);
 		return -EINVAL;
 	}
 

[dpdk-dev] [PATCH 02/10] igb_uio: use standard uio naming

[Stephen Hemminger]

[-- Attachment #1: igb_uio-name.patch --]
[-- Type: text/plain, Size: 690 bytes --]

Don't put capitialization and space in name since it will show
up in /proc/interrupts. Instead use driver name to follow the
conventions used in the kernel by other drivers.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:29:53.775667934 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:59:16.000000000 -0700
@@ -589,7 +589,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	}
 
 	/* fill uio infos */
-	udev->info.name = "Intel IGB UIO";
+	udev->info.name = "igb_uio";
 	udev->info.version = "0.1";
 	udev->info.handler = igbuio_pci_irqhandler;
 	udev->info.irqcontrol = igbuio_pci_irqcontrol;

[dpdk-dev] [PATCH 03/10] igb_uio: dont wrap pci_num_vf function needlessly

[Stephen Hemminger]

[-- Attachment #1: igb_uio-better-pci-num-vf.patch --]
[-- Type: text/plain, Size: 1405 bytes --]

It is better style to just use the pci_num_vf directly, rather
than wrapping it with a local (but globally named) function with
the same effect.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:29:57.587687790 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:59:14.000000000 -0700
@@ -83,9 +83,8 @@ igbuio_get_uio_pci_dev(struct uio_info *
 }
 
 /* sriov sysfs */
-int local_pci_num_vf(struct pci_dev *dev)
-{
 #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)
+static int pci_num_vf(struct pci_dev *dev)
 	struct iov {
 		int pos;
 		int nres;
@@ -100,17 +99,15 @@ int local_pci_num_vf(struct pci_dev *dev
 		return 0;
 
 	return iov->nr_virtfn;
-#else
-	return pci_num_vf(dev);
-#endif
 }
+#endif
 
 static ssize_t
 show_max_vfs(struct device *dev, struct device_attribute *attr,
 	     char *buf)
 {
-	return snprintf(buf, 10, "%u\n", local_pci_num_vf(
-				container_of(dev, struct pci_dev, dev)));
+	return snprintf(buf, 10, "%u\n",
+			pci_num_vf(container_of(dev, struct pci_dev, dev)));
 }
 
 static ssize_t
@@ -126,7 +123,7 @@ store_max_vfs(struct device *dev, struct
 
 	if (0 == max_vfs)
 		pci_disable_sriov(pdev);
-	else if (0 == local_pci_num_vf(pdev))
+	else if (0 == pci_num_vf(pdev))
 		err = pci_enable_sriov(pdev, max_vfs);
 	else /* do nothing if change max_vfs number */
 		err = -EINVAL;

Re: [dpdk-dev] [PATCH 03/10] igb_uio: dont wrap pci_num_vf function needlessly

[Thomas Monjalon]

2014-07-18 09:14, Stephen Hemminger:
>  /* sriov sysfs */
> -int local_pci_num_vf(struct pci_dev *dev)
> -{
>  #if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)
> +static int pci_num_vf(struct pci_dev *dev)
>  	struct iov {
>  		int pos;
>  		int nres;

A brace is missing here.
Fixed in master branch:
	http://dpdk.org/browse/dpdk/commit/?id=282e1ec8570

-- 
Thomas

[dpdk-dev] [PATCH 04/10] igb_uio: msix cleanups

[Stephen Hemminger]

[-- Attachment #1: igb_uio-msix-vector.patch --]
[-- Type: text/plain, Size: 2745 bytes --]

Since only one MSI-X entry is ever defined, there is no need to
put it as an array in the driver private data structure. One msix_entry
can just be put on the stack and initialized there.

Also remove the unused backport defines related to MSI-X.
I suspect this code was just inherited from some other project and
never cleaned up.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:38:29.291724950 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:42:06.460487465 -0700
@@ -37,19 +37,6 @@
 #endif
 #include <rte_pci_dev_features.h>
 
-/**
- * MSI-X related macros, copy from linux/pci_regs.h in kernel 2.6.39,
- * but none of them in kernel 2.6.35.
- */
-#ifndef PCI_MSIX_ENTRY_SIZE
-#define PCI_MSIX_ENTRY_SIZE             16
-#define PCI_MSIX_ENTRY_LOWER_ADDR       0
-#define PCI_MSIX_ENTRY_UPPER_ADDR       4
-#define PCI_MSIX_ENTRY_DATA             8
-#define PCI_MSIX_ENTRY_VECTOR_CTRL      12
-#define PCI_MSIX_ENTRY_CTRL_MASKBIT     1
-#endif
-
 #ifdef RTE_PCI_CONFIG
 #define PCI_SYS_FILE_BUF_SIZE      10
 #define PCI_DEV_CAP_REG            0xA4
@@ -59,8 +46,6 @@
 #define PCI_DEV_CTRL_EXT_TAG_MASK  (1 << PCI_DEV_CTRL_EXT_TAG_SHIFT)
 #endif
 
-#define IGBUIO_NUM_MSI_VECTORS 1
-
 /**
  * A structure describing the private information for a uio device.
  */
@@ -69,8 +54,6 @@ struct rte_uio_pci_dev {
 	struct pci_dev *pdev;
 	spinlock_t lock; /* spinlock for accessing PCI config space or msix data in multi tasks/isr */
 	enum rte_intr_mode mode;
-	struct msix_entry \
-		msix_entries[IGBUIO_NUM_MSI_VECTORS]; /* pointer to the msix vectors to be allocated later */
 };
 
 static char *intr_mode = NULL;
@@ -546,6 +529,7 @@ static int
 igbuio_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	struct rte_uio_pci_dev *udev;
+	struct msix_entry msix_entry;
 
 	udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
 	if (!udev)
@@ -602,12 +586,8 @@ igbuio_pci_probe(struct pci_dev *dev, co
 
 	/* check if it need to try msix first */
 	if (igbuio_intr_mode_preferred == RTE_INTR_MODE_MSIX) {
-		int vector;
-
-		for (vector = 0; vector < IGBUIO_NUM_MSI_VECTORS; vector ++)
-			udev->msix_entries[vector].entry = vector;
-
-		if (pci_enable_msix(udev->pdev, udev->msix_entries, IGBUIO_NUM_MSI_VECTORS) == 0) {
+		msix_entry.entry = 0;
+		if (pci_enable_msix(dev, &msix_entry, 1) == 0) {
 			udev->mode = RTE_INTR_MODE_MSIX;
 		}
 		else {
@@ -618,7 +598,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	switch (udev->mode) {
 	case RTE_INTR_MODE_MSIX:
 		udev->info.irq_flags = 0;
-		udev->info.irq = udev->msix_entries[0].vector;
+		udev->info.irq = msix_entry.vector;
 		break;
 	case RTE_INTR_MODE_MSI:
 		break;

[dpdk-dev] [PATCH 05/10] igb_uio: propogate error numbers in probe code

[Stephen Hemminger]

[-- Attachment #1: igb_uio-error-handling.patch --]
[-- Type: text/plain, Size: 3145 bytes --]

It is good practice to propogate the return values of failing
functions so that more information can be reported. The failed result
of probe will make it out to errno and get printed by modprobe
and will aid in diagnosis of failures.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:42:22.856545033 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:42:47.500631562 -0700
@@ -518,7 +518,7 @@ igbuio_setup_bars(struct pci_dev *dev, s
 		}
 	}
 
-	return ((iom != 0) ? ret : ENOENT);
+	return (iom != 0) ? ret : -ENOENT;
 }
 
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)
@@ -530,6 +530,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 {
 	struct rte_uio_pci_dev *udev;
 	struct msix_entry msix_entry;
+	int err;
 
 	udev = kzalloc(sizeof(struct rte_uio_pci_dev), GFP_KERNEL);
 	if (!udev)
@@ -539,7 +540,8 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	 * enable device: ask low-level code to enable I/O and
 	 * memory
 	 */
-	if (pci_enable_device(dev)) {
+	err = pci_enable_device(dev);
+	if (err != 0) {
 		dev_err(&dev->dev, "Cannot enable PCI device\n");
 		goto fail_free;
 	}
@@ -548,7 +550,8 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	 * reserve device's PCI memory regions for use by this
 	 * module
 	 */
-	if (pci_request_regions(dev, "igb_uio")) {
+	err = pci_request_regions(dev, "igb_uio");
+	if (err != 0) {
 		dev_err(&dev->dev, "Cannot request regions\n");
 		goto fail_disable;
 	}
@@ -557,14 +560,19 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	pci_set_master(dev);
 
 	/* remap IO memory */
-	if (igbuio_setup_bars(dev, &udev->info))
+	err = igbuio_setup_bars(dev, &udev->info);
+	if (err != 0)
 		goto fail_release_iomem;
 
 	/* set 64-bit DMA mask */
-	if (pci_set_dma_mask(dev,  DMA_BIT_MASK(64))) {
+	err = pci_set_dma_mask(dev,  DMA_BIT_MASK(64));
+	if (err != 0) {
 		dev_err(&dev->dev, "Cannot set DMA mask\n");
 		goto fail_release_iomem;
-	} else if (pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64))) {
+	}
+
+	err = pci_set_consistent_dma_mask(dev, DMA_BIT_MASK(64));
+	if (err != 0) {
 		dev_err(&dev->dev, "Cannot set consistent DMA mask\n");
 		goto fail_release_iomem;
 	}
@@ -613,19 +621,22 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	pci_set_drvdata(dev, udev);
 	igbuio_pci_irqcontrol(&udev->info, 0);
 
-	if (sysfs_create_group(&dev->dev.kobj, &dev_attr_grp))
+	err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
+	if (err != 0)
 		goto fail_release_iomem;
 
 	/* register uio driver */
-	if (uio_register_device(&dev->dev, &udev->info))
-		goto fail_release_iomem;
+	err = uio_register_device(&dev->dev, &udev->info);
+	if (err != 0)
+		goto fail_remove_group;
 
 	printk(KERN_INFO "uio device registered with irq %lx\n", udev->info.irq);
 
 	return 0;
 
-fail_release_iomem:
+fail_remove_group:
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
+fail_release_iomem:
 	igbuio_pci_release_iomem(&udev->info);
 	if (udev->mode == RTE_INTR_MODE_MSIX)
 		pci_disable_msix(udev->pdev);
@@ -635,7 +646,7 @@ fail_disable:
 fail_free:
 	kfree(udev);
 
-	return -ENODEV;
+	return err;
 }
 
 static void

[dpdk-dev] [PATCH 06/10] igb_uio: make irq mode param read-only

[Stephen Hemminger]

[-- Attachment #1: igb_uio-mode-param-ro.patch --]
[-- Type: text/plain, Size: 677 bytes --]

The module parameter is read-only since changing mode after loading
isn't going to work.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:42:54.028654483 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:42:54.028654483 -0700
@@ -721,7 +721,7 @@ igbuio_pci_exit_module(void)
 module_init(igbuio_pci_init_module);
 module_exit(igbuio_pci_exit_module);
 
-module_param(intr_mode, charp, S_IRUGO | S_IWUSR);
+module_param(intr_mode, charp, S_IRUGO);
 MODULE_PARM_DESC(intr_mode,
 "igb_uio interrupt mode (default=msix):\n"
 "    " RTE_INTR_MODE_MSIX_NAME "       Use MSIX interrupt\n"

[dpdk-dev] [PATCH 07/10] igb_uio: fix IRQ mode handling

[Stephen Hemminger]

[-- Attachment #1: igb_uio-irq-mgmt.patch --]
[-- Type: text/plain, Size: 10602 bytes --]

This pach reworks how IRQ mode handling is done.

The biggest code change is to use the standard INTX management
code that exists in more recent kernels (and provide backport version).
This also fixes the pci_lock code which was broken, since it was
not protecting against config access, and was doing trylock.

Make this driver behave like other Linux drivers.
Start at MSI-X and degrade to less desireable modes
automatically if the desired type is not available.

This patch also makes MSI mode work, previously the mode
was there but it would never work.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

---
 lib/librte_eal/common/include/rte_pci_dev_feature_defs.h |    3 
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c                |  243 +++++++--------
 2 files changed, 119 insertions(+), 127 deletions(-)

--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:43:13.252721981 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:47:06.813542050 -0700
@@ -52,7 +52,6 @@
 struct rte_uio_pci_dev {
 	struct uio_info info;
 	struct pci_dev *pdev;
-	spinlock_t lock; /* spinlock for accessing PCI config space or msix data in multi tasks/isr */
 	enum rte_intr_mode mode;
 };
 
@@ -220,36 +219,67 @@ static const struct attribute_group dev_
 	.attrs = dev_attrs,
 };
 
-static inline int
-pci_lock(struct pci_dev * pdev)
-{
-	/* Some function names changes between 3.2.0 and 3.3.0... */
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
-	pci_block_user_cfg_access(pdev);
-	return 1;
-#else
-	return pci_cfg_access_trylock(pdev);
-#endif
+/* Check if INTX works to control irq's.
+ * Set's INTX_DISABLE flag and reads it back
+ */
+static bool pci_intx_mask_supported(struct pci_dev *dev)
+{
+	bool mask_supported = false;
+	uint16_t orig, new
+
+	pci_block_user_cfg_access(dev);
+	pci_read_config_word(pdev, PCI_COMMAND, &orig);
+	pci_write_config_word(dev, PCI_COMMAND,
+			      orig ^ PCI_COMMAND_INTX_DISABLE);
+	pci_read_config_word(dev, PCI_COMMAND, &new);
+
+	if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
+		dev_err(&dev->dev, "Command register changed from "
+			"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
+	} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
+		mask_supported = true;
+		pci_write_config_word(dev, PCI_COMMAND, orig);
+	}
+	pci_unblock_user_cfg_access(dev);
 }
 
-static inline void
-pci_unlock(struct pci_dev * pdev)
+static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 {
-	/* Some function names changes between 3.2.0 and 3.3.0... */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
-	pci_unblock_user_cfg_access(pdev);
-#else
-	pci_cfg_access_unlock(pdev);
-#endif
+	bool pending;
+	uint32_t status;
+
+	pci_block_user_cfg_access(dev);
+	pci_read_config_dword(pdev, PCI_COMMAND, &status);
+
+	/* interrupt is not ours, goes to out */
+	pending = (((status >> 16) & PCI_STATUS_INTERRUPT) != 0);
+	if (pending) {
+		uint16_t old, new;
+
+		old = status;
+		if (state != 0)
+			new = old & (~PCI_COMMAND_INTX_DISABLE);
+		else
+			new = old | PCI_COMMAND_INTX_DISABLE;
+
+		if (old != new)
+			pci_write_config_word(pdev, PCI_COMMAND, new);
+	}
+	pci_unblock_user_cfg_access(dev);
+
+	return pending;
 }
+#endif
 
-/**
+/*
  * It masks the msix on/off of generating MSI-X messages.
  */
-static int
+static void
 igbuio_msix_mask_irq(struct msi_desc *desc, int32_t state)
 {
-	uint32_t mask_bits = desc->masked;
+	u32 mask_bits = desc->masked;
 	unsigned offset = desc->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
 						PCI_MSIX_ENTRY_VECTOR_CTRL;
 
@@ -263,48 +293,25 @@ igbuio_msix_mask_irq(struct msi_desc *de
 		readl(desc->mask_base);
 		desc->masked = mask_bits;
 	}
-
-	return 0;
 }
 
-/**
- * This function sets/clears the masks for generating LSC interrupts.
- *
- * @param info
- *   The pointer to struct uio_info.
- * @param on
- *   The on/off flag of masking LSC.
- * @return
- *   -On success, zero value.
- *   -On failure, a negative value.
- */
-static int
-igbuio_set_interrupt_mask(struct rte_uio_pci_dev *udev, int32_t state)
-{
-	struct pci_dev *pdev = udev->pdev;
-
-	if (udev->mode == RTE_INTR_MODE_MSIX) {
-		struct msi_desc *desc;
 
-		list_for_each_entry(desc, &pdev->msi_list, list) {
-			igbuio_msix_mask_irq(desc, state);
-		}
-	} else if (udev->mode == RTE_INTR_MODE_LEGACY) {
-		uint32_t status;
-		uint16_t old, new;
+static void
+igbuio_msi_mask_irq(struct irq_data *data, u32 enable)
+{
+	struct msi_desc *desc = irq_data_get_msi(data);
+	u32 mask_bits = desc->masked;
+	unsigned offset = data->irq - desc->dev->irq;
+	u32 mask = 1 << offset;
+	u32 flag = enable << offset;
 
-		pci_read_config_dword(pdev, PCI_COMMAND, &status);
-		old = status;
-		if (state != 0)
-			new = old & (~PCI_COMMAND_INTX_DISABLE);
-		else
-			new = old | PCI_COMMAND_INTX_DISABLE;
+	mask_bits &= ~mask;
+	mask_bits |= flag;
 
-		if (old != new)
-			pci_write_config_word(pdev, PCI_COMMAND, new);
+	if (desc->msi_attrib.maskbit && mask_bits != desc->masked) {
+		pci_write_config_dword(desc->dev, desc->mask_pos, mask_bits);
+		desc->masked = mask_bits;
 	}
-
-	return 0;
 }
 
 /**
@@ -323,20 +330,23 @@ igbuio_set_interrupt_mask(struct rte_uio
 static int
 igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 {
-	unsigned long flags;
 	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
 	struct pci_dev *pdev = udev->pdev;
 
-	spin_lock_irqsave(&udev->lock, flags);
-	if (!pci_lock(pdev)) {
-		spin_unlock_irqrestore(&udev->lock, flags);
-		return -1;
-	}
+	pci_cfg_access_lock(pdev);
+	if (udev->mode == RTE_INTR_MODE_LEGACY)
+		pci_intx(pdev, !!irq_state);
+	else if (udev->mode == RTE_INTR_MODE_MSI) {
+		struct irq_data *data = irq_get_irq_data(pdev->irq);
 
-	igbuio_set_interrupt_mask(udev, irq_state);
+		igbuio_msi_mask_irq(data, !!irq_state);
+	} else if (udev->mode == RTE_INTR_MODE_MSIX) {
+		struct msi_desc *desc;
 
-	pci_unlock(pdev);
-	spin_unlock_irqrestore(&udev->lock, flags);
+		list_for_each_entry(desc, &pdev->msi_list, list)
+			igbuio_msix_mask_irq(desc, irq_state);
+	}
+	pci_cfg_access_unlock(pdev);
 
 	return 0;
 }
@@ -348,37 +358,15 @@ igbuio_pci_irqcontrol(struct uio_info *i
 static irqreturn_t
 igbuio_pci_irqhandler(int irq, struct uio_info *info)
 {
-	irqreturn_t ret = IRQ_NONE;
-	unsigned long flags;
 	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
-	struct pci_dev *pdev = udev->pdev;
-	uint32_t cmd_status_dword;
-	uint16_t status;
 
-	spin_lock_irqsave(&udev->lock, flags);
-	/* block userspace PCI config reads/writes */
-	if (!pci_lock(pdev))
-		goto spin_unlock;
-
-	/* for legacy mode, interrupt maybe shared */
-	if (udev->mode == RTE_INTR_MODE_LEGACY) {
-		pci_read_config_dword(pdev, PCI_COMMAND, &cmd_status_dword);
-		status = cmd_status_dword >> 16;
-		/* interrupt is not ours, goes to out */
-		if (!(status & PCI_STATUS_INTERRUPT))
-			goto done;
-	}
-
-	igbuio_set_interrupt_mask(udev, 0);
-	ret = IRQ_HANDLED;
-done:
-	/* unblock userspace PCI config reads/writes */
-	pci_unlock(pdev);
-spin_unlock:
-	spin_unlock_irqrestore(&udev->lock, flags);
-	pr_info("irq 0x%x %s\n", irq, (ret == IRQ_HANDLED) ? "handled" : "not handled");
+	/* Legacy mode need to mask in hardware */
+	if (udev->mode == RTE_INTR_MODE_LEGACY &&
+	    !pci_check_and_mask_intx(udev->pdev))
+		return IRQ_NONE;
 
-	return ret;
+	/* Message signal mode, no share IRQ and automasked */
+	return IRQ_HANDLED;
 }
 
 #ifdef CONFIG_XEN_DOM0
@@ -582,6 +570,7 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	udev->info.version = "0.1";
 	udev->info.handler = igbuio_pci_irqhandler;
 	udev->info.irqcontrol = igbuio_pci_irqcontrol;
+	udev->info.irq = dev->irq;
 #ifdef CONFIG_XEN_DOM0
 	/* check if the driver run on Xen Dom0 */
 	if (xen_initial_domain())
@@ -589,38 +578,48 @@ igbuio_pci_probe(struct pci_dev *dev, co
 #endif
 	udev->info.priv = udev;
 	udev->pdev = dev;
-	udev->mode = RTE_INTR_MODE_LEGACY;
-	spin_lock_init(&udev->lock);
 
-	/* check if it need to try msix first */
-	if (igbuio_intr_mode_preferred == RTE_INTR_MODE_MSIX) {
+	switch (igbuio_intr_mode_preferred) {
+	case RTE_INTR_MODE_NONE:
+		udev->info.irq = 0;
+		break;
+
+	case RTE_INTR_MODE_MSIX:
+		/* Only 1 msi-x vector needed */
 		msix_entry.entry = 0;
 		if (pci_enable_msix(dev, &msix_entry, 1) == 0) {
+			dev_dbg(&dev->dev, "using MSI-X");
+			udev->info.irq = msix_entry.vector;
 			udev->mode = RTE_INTR_MODE_MSIX;
+			break;
 		}
-		else {
-			pci_disable_msix(udev->pdev);
-			pr_info("fail to enable pci msix, or not enough msix entries\n");
-		}
-	}
-	switch (udev->mode) {
-	case RTE_INTR_MODE_MSIX:
-		udev->info.irq_flags = 0;
-		udev->info.irq = msix_entry.vector;
-		break;
+		/* fall back to MSI */
 	case RTE_INTR_MODE_MSI:
-		break;
+		if (pci_enable_msi(dev) == 0) {
+			dev_dbg(&dev->dev, "using MSI");
+			udev->info.irq = dev->irq;
+			udev->mode = RTE_INTR_MODE_MSI;
+			break;
+		}
+		/* fall back to INTX */
 	case RTE_INTR_MODE_LEGACY:
-		udev->info.irq_flags = IRQF_SHARED;
-		udev->info.irq = dev->irq;
+		if (pci_intx_mask_supported(dev)) {
+			dev_dbg(&dev->dev, "using INTX");
+			udev->info.irq_flags = IRQF_SHARED;
+			udev->mode = RTE_INTR_MODE_LEGACY;
+		} else {
+			dev_err(&dev->dev, "PCI INTX mask not supported\n");
+			err = -EIO;
+			goto fail_release_iomem;
+		}
 		break;
 	default:
-		break;
+		dev_err(&dev->dev, "invalid IRQ mode %u",
+			igbuio_intr_mode_preferred);
+		err = -EINVAL;
+		goto fail_release_iomem;
 	}
 
-	pci_set_drvdata(dev, udev);
-	igbuio_pci_irqcontrol(&udev->info, 0);
-
 	err = sysfs_create_group(&dev->dev.kobj, &dev_attr_grp);
 	if (err != 0)
 		goto fail_release_iomem;
@@ -630,7 +629,10 @@ igbuio_pci_probe(struct pci_dev *dev, co
 	if (err != 0)
 		goto fail_remove_group;
 
-	printk(KERN_INFO "uio device registered with irq %lx\n", udev->info.irq);
+	pci_set_drvdata(dev, udev);
+
+	dev_info(&dev->dev, "uio device registered with irq %lx\n",
+		 udev->info.irq);
 
 	return 0;
 
@@ -640,6 +642,8 @@ fail_release_iomem:
 	igbuio_pci_release_iomem(&udev->info);
 	if (udev->mode == RTE_INTR_MODE_MSIX)
 		pci_disable_msix(udev->pdev);
+	if (udev->mode == RTE_INTR_MODE_MSI)
+		pci_disable_msi(udev->pdev);
 	pci_release_regions(dev);
 fail_disable:
 	pci_disable_device(dev);
--- a/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h	2014-07-18 08:43:13.252721981 -0700
+++ b/lib/librte_eal/common/include/rte_pci_dev_feature_defs.h	2014-07-18 08:43:13.252721981 -0700
@@ -39,8 +39,7 @@ enum rte_intr_mode {
 	RTE_INTR_MODE_NONE = 0,
 	RTE_INTR_MODE_LEGACY,
 	RTE_INTR_MODE_MSI,
-	RTE_INTR_MODE_MSIX,
-	RTE_INTR_MODE_MAX
+	RTE_INTR_MODE_MSIX
 };
 
 #endif /* _RTE_PCI_DEV_DEFS_H_ */

[dpdk-dev] [PATCH 08/10] igb_uio: add missing locking to config access

[Stephen Hemminger]

[-- Attachment #1: igb_uio-cfg-lock.patch --]
[-- Type: text/plain, Size: 1033 bytes --]

Access to PCI config space should be inside pci_cfg_access_lock
to avoid read/modify/write races.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:55:03.959554076 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-06-19 14:58:55.000000000 -0700
@@ -148,10 +148,13 @@ store_extended_tag(struct device *dev,
 	else
 		return -EINVAL;
 
+	pci_cfg_access_lock(pci_dev);
 	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CAP_REG, &val);
-	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) /* Not supported */
+	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) { /* Not supported */
+		pci_cfg_access_unlock(pci_dev);
 		return -EPERM;
+	}
 
 	val = 0;
 	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
@@ -162,6 +165,7 @@ store_extended_tag(struct device *dev,
 		val &= ~PCI_DEV_CTRL_EXT_TAG_MASK;
 	pci_bus_write_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CTRL_REG, val);
+	pci_cfg_access_unlock(pci_dev);
 
 	return count;
 }

[dpdk-dev] [PATCH 09/10] igb_uio: allow msi mode

[Stephen Hemminger]

[-- Attachment #1: igb_uio_msi_mode.patch --]
[-- Type: text/plain, Size: 2147 bytes --]

Allows msi to be selected as a preferred mode.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>

--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:47:24.713604900 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:47:24.709604886 -0700
@@ -646,7 +646,7 @@ fail_release_iomem:
 	igbuio_pci_release_iomem(&udev->info);
 	if (udev->mode == RTE_INTR_MODE_MSIX)
 		pci_disable_msix(udev->pdev);
-	if (udev->mode == RTE_INTR_MODE_MSI)
+	else if (udev->mode == RTE_INTR_MODE_MSI)
 		pci_disable_msi(udev->pdev);
 	pci_release_regions(dev);
 fail_disable:
@@ -661,6 +661,7 @@ static void
 igbuio_pci_remove(struct pci_dev *dev)
 {
 	struct uio_info *info = pci_get_drvdata(dev);
+	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
 
 	if (info->priv == NULL) {
 		pr_notice("Not igbuio device\n");
@@ -670,9 +671,10 @@ igbuio_pci_remove(struct pci_dev *dev)
 	sysfs_remove_group(&dev->dev.kobj, &dev_attr_grp);
 	uio_unregister_device(info);
 	igbuio_pci_release_iomem(info);
-	if (((struct rte_uio_pci_dev *)info->priv)->mode ==
-			RTE_INTR_MODE_MSIX)
+	if (udev->mode == RTE_INTR_MODE_MSIX)
 		pci_disable_msix(dev);
+	else if (udev->mode == RTE_INTR_MODE_MSI)
+		pci_disable_msi(dev);
 	pci_release_regions(dev);
 	pci_disable_device(dev);
 	pci_set_drvdata(dev, NULL);
@@ -690,6 +692,9 @@ igbuio_config_intr_mode(char *intr_str)
 	if (!strcmp(intr_str, RTE_INTR_MODE_MSIX_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSIX;
 		pr_info("Use MSIX interrupt\n");
+	} else if (!strcmp(intr_str, RTE_INTR_MODE_MSI_NAME)) {
+		igbuio_intr_mode_preferred = RTE_INTR_MODE_MSI;
+		pr_info("Use MSI interrupt\n");
 	} else if (!strcmp(intr_str, RTE_INTR_MODE_LEGACY_NAME)) {
 		igbuio_intr_mode_preferred = RTE_INTR_MODE_LEGACY;
 		pr_info("Use legacy interrupt\n");
@@ -733,6 +738,7 @@ module_param(intr_mode, charp, S_IRUGO);
 MODULE_PARM_DESC(intr_mode,
 "igb_uio interrupt mode (default=msix):\n"
 "    " RTE_INTR_MODE_MSIX_NAME "       Use MSIX interrupt\n"
+"    " RTE_INTR_MODE_MSI_NAME "       Use MSI interrupt\n"
 "    " RTE_INTR_MODE_LEGACY_NAME "     Use Legacy interrupt\n"
 "\n");
 

[dpdk-dev] [PATCH 10/10] igb_uio: fix check patch warnings

[Stephen Hemminger]

[-- Attachment #1: igb_uio-checkpatch.patch --]
[-- Type: text/plain, Size: 4588 bytes --]

Fix whitespace and other problems reported by checkpatch.

This didi find a real bug in that the setup code was returning
positive value for errors which goes against convention and might have
caused a problem.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>


--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 08:47:24.709604886 -0700
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c	2014-07-18 09:01:42.336616148 -0700
@@ -65,7 +65,7 @@ igbuio_get_uio_pci_dev(struct uio_info *
 }
 
 /* sriov sysfs */
-#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,34)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(2, 6, 34)
 static int pci_num_vf(struct pci_dev *dev)
 	struct iov {
 		int pos;
@@ -75,7 +75,7 @@ static int pci_num_vf(struct pci_dev *de
 		u16 total;
 		u16 initial;
 		u16 nr_virtfn;
-	} *iov = (struct iov*)dev->sriov;
+	} *iov = (struct iov *)dev->sriov;
 
 	if (!dev->is_physfn)
 		return 0;
@@ -204,9 +204,9 @@ store_max_read_request_size(struct devic
 
 static DEVICE_ATTR(max_vfs, S_IRUGO | S_IWUSR, show_max_vfs, store_max_vfs);
 #ifdef RTE_PCI_CONFIG
-static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag, \
+static DEVICE_ATTR(extended_tag, S_IRUGO | S_IWUSR, show_extended_tag,
 	store_extended_tag);
-static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR, \
+static DEVICE_ATTR(max_read_request_size, S_IRUGO | S_IWUSR,
 	show_max_read_request_size, store_max_read_request_size);
 #endif
 
@@ -216,7 +216,7 @@ static struct attribute *dev_attrs[] = {
 	&dev_attr_extended_tag.attr,
 	&dev_attr_max_read_request_size.attr,
 #endif
-        NULL,
+	NULL,
 };
 
 static const struct attribute_group dev_attr_grp = {
@@ -224,7 +224,7 @@ static const struct attribute_group dev_
 };
 
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
 /* Check if INTX works to control irq's.
  * Set's INTX_DISABLE flag and reads it back
  */
@@ -378,6 +378,7 @@ static int
 igbuio_dom0_mmap_phys(struct uio_info *info, struct vm_area_struct *vma)
 {
 	int idx;
+
 	idx = (int)vma->vm_pgoff;
 	vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
 	vma->vm_page_prot.pgprot |= _PAGE_IOMAP;
@@ -400,8 +401,9 @@ igbuio_dom0_pci_mmap(struct uio_info *in
 
 	if (vma->vm_pgoff >= MAX_UIO_MAPS)
 		return -EINVAL;
-	if(info->mem[vma->vm_pgoff].size == 0)
-		return  -EINVAL;
+
+	if (info->mem[vma->vm_pgoff].size == 0)
+		return -EINVAL;
 
 	idx = (int)vma->vm_pgoff;
 	switch (info->mem[idx].memtype) {
@@ -423,8 +425,8 @@ igbuio_pci_setup_iomem(struct pci_dev *d
 	unsigned long addr, len;
 	void *internal_addr;
 
-	if (sizeof(info->mem) / sizeof (info->mem[0]) <= n)
-		return (EINVAL);
+	if (sizeof(info->mem) / sizeof(info->mem[0]) <= n)
+		return -EINVAL;
 
 	addr = pci_resource_start(dev, pci_bar);
 	len = pci_resource_len(dev, pci_bar);
@@ -448,20 +450,20 @@ igbuio_pci_setup_ioport(struct pci_dev *
 {
 	unsigned long addr, len;
 
-	if (sizeof(info->port) / sizeof (info->port[0]) <= n)
-		return (EINVAL);
+	if (sizeof(info->port) / sizeof(info->port[0]) <= n)
+		return -EINVAL;
 
 	addr = pci_resource_start(dev, pci_bar);
 	len = pci_resource_len(dev, pci_bar);
 	if (addr == 0 || len == 0)
-		return (-1);
+		return -EINVAL;
 
 	info->port[n].name = name;
 	info->port[n].start = addr;
 	info->port[n].size = len;
 	info->port[n].porttype = UIO_PORT_X86;
 
-	return (0);
+	return 0;
 }
 
 /* Unmap previously ioremap'd resources */
@@ -469,6 +471,7 @@ static void
 igbuio_pci_release_iomem(struct uio_info *info)
 {
 	int i;
+
 	for (i = 0; i < MAX_UIO_MAPS; i++) {
 		if (info->mem[i].internal_addr)
 			iounmap(info->mem[i].internal_addr);
@@ -497,14 +500,16 @@ igbuio_setup_bars(struct pci_dev *dev, s
 				pci_resource_start(dev, i) != 0) {
 			flags = pci_resource_flags(dev, i);
 			if (flags & IORESOURCE_MEM) {
-				if ((ret = igbuio_pci_setup_iomem(dev, info,
-						iom, i, bar_names[i])) != 0)
-					return (ret);
+				ret = igbuio_pci_setup_iomem(dev, info, iom,
+							     i, bar_names[i]);
+				if (ret != 0)
+					return ret;
 				iom++;
 			} else if (flags & IORESOURCE_IO) {
-				if ((ret = igbuio_pci_setup_ioport(dev, info,
-						iop, i, bar_names[i])) != 0)
-					return (ret);
+				ret = igbuio_pci_setup_ioport(dev, info, iop,
+							      i, bar_names[i]);
+				if (ret != 0)
+					return ret;
 				iop++;
 			}
 		}
@@ -513,7 +518,7 @@ igbuio_setup_bars(struct pci_dev *dev, s
 	return (iom != 0) ? ret : -ENOENT;
 }
 
-#if LINUX_VERSION_CODE < KERNEL_VERSION(3,8,0)
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 8, 0)
 static int __devinit
 #else
 static int

Re: [dpdk-dev] [PATCH 00/10] igb_uio related patches

[Thomas Monjalon]

2014-07-18 09:14, Stephen Hemminger:
> Update patches so all are now bisectable, and incorporate comments.
> Also fix the checkpatch warnings that are fixable.

I've isolated all MSI additions in the dedicated commit.

Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

Applied for version 1.7.1

What are the news about your uio work for kernel.org?

Thanks
-- 
Thomas

Re: [dpdk-dev] [PATCH 00/10] igb_uio related patches

[Yerden Zhumabekov]

[-- Attachment #1: Type: text/plain, Size: 775 bytes --]

hi,

Unfortunately the latest 'master' no longer builds on ubuntu 12.04.
Build log attached.
i've also added a patch to fix it. It involves fixing some typos and
reverting pci dev lock/unlock functions from older kernel versions
(maybe I'm not at liberty doing this). Please consider/remark.


19.07.2014 6:16, Thomas Monjalon пишет:
> 2014-07-18 09:14, Stephen Hemminger:
>> Update patches so all are now bisectable, and incorporate comments.
>> Also fix the checkpatch warnings that are fixable.
> I've isolated all MSI additions in the dedicated commit.
>
> Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>
>
> Applied for version 1.7.1
>
> What are the news about your uio work for kernel.org?
>
> Thanks

-- 
Sincerely,

Yerden Zhumabekov
STS, ACI
Astana, KZ


[-- Attachment #2: build.log --]
[-- Type: text/plain, Size: 3023 bytes --]

================== Installing x86_64-native-linuxapp-gcc
make[5]: Nothing to be done for `depdirs'.
Configuration done
== Build scripts
== Build scripts/testhost
== Build lib
== Build lib/librte_eal
== Build lib/librte_eal/common
== Build lib/librte_eal/linuxapp
== Build lib/librte_eal/linuxapp/igb_uio
  CC [M]  /home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c: In function ‘pci_intx_mask_supported’:
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:235:2: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘pci_block_user_cfg_access’
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:236:23: error: ‘pdev’ undeclared (first use in this function)
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:236:23: note: each undeclared identifier is reported only once for each function it appears in
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:239:42: error: ‘new’ undeclared (first use in this function)
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:249:1: error: no return statement in function returning non-void [-Werror=return-type]
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c: In function ‘pci_check_and_mask_intx’:
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:256:28: error: ‘dev’ undeclared (first use in this function)
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:265:7: error: ‘state’ undeclared (first use in this function)
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c: In function ‘igbuio_pci_irqcontrol’:
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:338:2: error: implicit declaration of function ‘pci_cfg_access_lock’ [-Werror=implicit-function-declaration]
/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.c:351:2: error: implicit declaration of function ‘pci_cfg_access_unlock’ [-Werror=implicit-function-declaration]
cc1: all warnings being treated as errors
make[10]: *** [/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio/igb_uio.o] Error 1
make[9]: *** [_module_/home/yerden/dpdk/x86_64-native-linuxapp-gcc/build/lib/librte_eal/linuxapp/igb_uio] Error 2
make[8]: *** [sub-make] Error 2
make[7]: *** [igb_uio.ko] Error 2
make[6]: *** [igb_uio] Error 2
make[5]: *** [linuxapp] Error 2
make[4]: *** [librte_eal] Error 2
make[3]: *** [lib] Error 2
make[2]: *** [all] Error 2
make[1]: *** [x86_64-native-linuxapp-gcc_install] Error 2
make: *** [install] Error 2

[-- Attachment #3: dpdk-fix-igb_uio.patch --]
[-- Type: text/plain, Size: 3607 bytes --]

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 05cbe8e..c5dbbe2 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -148,11 +148,11 @@ store_extended_tag(struct device *dev,
 	else
 		return -EINVAL;
 
-	pci_cfg_access_lock(pci_dev);
+	pci_block_user_cfg_access(pci_dev);
 	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CAP_REG, &val);
 	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) { /* Not supported */
-		pci_cfg_access_unlock(pci_dev);
+		pci_unblock_user_cfg_access(pci_dev);
 		return -EPERM;
 	}
 
@@ -165,7 +165,7 @@ store_extended_tag(struct device *dev,
 		val &= ~PCI_DEV_CTRL_EXT_TAG_MASK;
 	pci_bus_write_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CTRL_REG, val);
-	pci_cfg_access_unlock(pci_dev);
+	pci_block_user_cfg_access(pci_dev);
 
 	return count;
 }
@@ -227,25 +227,26 @@ static const struct attribute_group dev_attr_grp = {
 /* Check if INTX works to control irq's.
  * Set's INTX_DISABLE flag and reads it back
  */
-static bool pci_intx_mask_supported(struct pci_dev *dev)
+static bool pci_intx_mask_supported(struct pci_dev *pdev)
 {
 	bool mask_supported = false;
-	uint16_t orig, new
+	uint16_t orig, new;
 
-	pci_block_user_cfg_access(dev);
+	pci_block_user_cfg_access(pdev);
 	pci_read_config_word(pdev, PCI_COMMAND, &orig);
-	pci_write_config_word(dev, PCI_COMMAND,
+	pci_write_config_word(pdev, PCI_COMMAND,
 			      orig ^ PCI_COMMAND_INTX_DISABLE);
-	pci_read_config_word(dev, PCI_COMMAND, &new);
+	pci_read_config_word(pdev, PCI_COMMAND, &new);
 
 	if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
-		dev_err(&dev->dev, "Command register changed from "
+		dev_err(&pdev->dev, "Command register changed from "
 			"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
 	} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
 		mask_supported = true;
-		pci_write_config_word(dev, PCI_COMMAND, orig);
+		pci_write_config_word(pdev, PCI_COMMAND, orig);
 	}
-	pci_unblock_user_cfg_access(dev);
+	pci_unblock_user_cfg_access(pdev);
+	return mask_supported;
 }
 
 static bool pci_check_and_mask_intx(struct pci_dev *pdev)
@@ -253,7 +254,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 	bool pending;
 	uint32_t status;
 
-	pci_block_user_cfg_access(dev);
+	pci_block_user_cfg_access(pdev);
 	pci_read_config_dword(pdev, PCI_COMMAND, &status);
 
 	/* interrupt is not ours, goes to out */
@@ -262,7 +263,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 		uint16_t old, new;
 
 		old = status;
-		if (state != 0)
+		if (status != 0)
 			new = old & (~PCI_COMMAND_INTX_DISABLE);
 		else
 			new = old | PCI_COMMAND_INTX_DISABLE;
@@ -270,7 +271,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 		if (old != new)
 			pci_write_config_word(pdev, PCI_COMMAND, new);
 	}
-	pci_unblock_user_cfg_access(dev);
+	pci_unblock_user_cfg_access(pdev);
 
 	return pending;
 }
@@ -335,7 +336,7 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
 	struct pci_dev *pdev = udev->pdev;
 
-	pci_cfg_access_lock(pdev);
+	pci_block_user_cfg_access(pdev);
 	if (udev->mode == RTE_INTR_MODE_LEGACY)
 		pci_intx(pdev, !!irq_state);
 	else if (udev->mode == RTE_INTR_MODE_MSI) {
@@ -348,7 +349,7 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 		list_for_each_entry(desc, &pdev->msi_list, list)
 			igbuio_msix_mask_irq(desc, irq_state);
 	}
-	pci_cfg_access_unlock(pdev);
+	pci_unblock_user_cfg_access(pdev);
 
 	return 0;
 }

Re: [dpdk-dev] [PATCH 00/10] igb_uio related patches

[Thomas Monjalon]

Hi Yerden,

2014-07-20 14:14, Yerden Zhumabekov:
> Unfortunately the latest 'master' no longer builds on ubuntu 12.04.

Thanks for reporting.
There are also some issues with other distributions like Suse or RHEL.


> i've also added a patch to fix it. It involves fixing some typos and
> reverting pci dev lock/unlock functions from older kernel versions
> (maybe I'm not at liberty doing this). Please consider/remark.

Please could you split in 3 patches
	- obvious fixes
	- locking fix proposal
	- renaming
and send it with git send-email as described in
	http://dpdk.org/dev#send

Thanks
-- 
Thomas

[dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Yerden Zhumabekov]

Since PCI config lock/unlock functions were renamed in linux kernel,
wrappers are introduced to reflect this change.

Fixed a few typos.


Yerden Zhumabekov (3):
  igb_uio: fixed typos
  igb_uio: pci_config_lock/pci_config_unlock wrappers
  igb_uio: renaming pci config lock/unlock functions

 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   54 ++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 16 deletions(-)

-- 
1.7.10.4

[dpdk-dev] [igb_uio PATCH 1/3] igb_uio: fixed typos

[Yerden Zhumabekov]

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 05cbe8e..02545d9 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -227,25 +227,27 @@ static const struct attribute_group dev_attr_grp = {
 /* Check if INTX works to control irq's.
  * Set's INTX_DISABLE flag and reads it back
  */
-static bool pci_intx_mask_supported(struct pci_dev *dev)
+static bool pci_intx_mask_supported(struct pci_dev *pdev)
 {
 	bool mask_supported = false;
-	uint16_t orig, new
+	uint16_t orig, new;
 
-	pci_block_user_cfg_access(dev);
+	pci_block_user_cfg_access(pdev);
 	pci_read_config_word(pdev, PCI_COMMAND, &orig);
-	pci_write_config_word(dev, PCI_COMMAND,
+	pci_write_config_word(pdev, PCI_COMMAND,
 			      orig ^ PCI_COMMAND_INTX_DISABLE);
-	pci_read_config_word(dev, PCI_COMMAND, &new);
+	pci_read_config_word(pdev, PCI_COMMAND, &new);
 
 	if ((new ^ orig) & ~PCI_COMMAND_INTX_DISABLE) {
-		dev_err(&dev->dev, "Command register changed from "
+		dev_err(&pdev->dev, "Command register changed from "
 			"0x%x to 0x%x: driver or hardware bug?\n", orig, new);
 	} else if ((new ^ orig) & PCI_COMMAND_INTX_DISABLE) {
 		mask_supported = true;
-		pci_write_config_word(dev, PCI_COMMAND, orig);
+		pci_write_config_word(pdev, PCI_COMMAND, orig);
 	}
-	pci_unblock_user_cfg_access(dev);
+	pci_unblock_user_cfg_access(pdev);
+
+	return mask_supported;
 }
 
 static bool pci_check_and_mask_intx(struct pci_dev *pdev)
@@ -253,7 +255,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 	bool pending;
 	uint32_t status;
 
-	pci_block_user_cfg_access(dev);
+	pci_block_user_cfg_access(pdev);
 	pci_read_config_dword(pdev, PCI_COMMAND, &status);
 
 	/* interrupt is not ours, goes to out */
@@ -262,7 +264,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 		uint16_t old, new;
 
 		old = status;
-		if (state != 0)
+		if (status != 0)
 			new = old & (~PCI_COMMAND_INTX_DISABLE);
 		else
 			new = old | PCI_COMMAND_INTX_DISABLE;
@@ -270,7 +272,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 		if (old != new)
 			pci_write_config_word(pdev, PCI_COMMAND, new);
 	}
-	pci_unblock_user_cfg_access(dev);
+	pci_unblock_user_cfg_access(pdev);
 
 	return pending;
 }
-- 
1.7.10.4

[dpdk-dev] [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers

[Yerden Zhumabekov]

Since PCI config lock/unlock functions were renamed in linux kernel,
these wrappers are introduced to reflect this change.

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 02545d9..605410e 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -223,6 +223,26 @@ static const struct attribute_group dev_attr_grp = {
 	.attrs = dev_attrs,
 };
 
+static inline void
+pci_config_lock(struct pci_dev *pdev)
+{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
+	pci_block_user_cfg_access(pdev);
+#else
+	pci_cfg_access_lock(pdev);
+#endif
+}
+
+static inline void
+pci_config_unlock(struct pci_dev *pdev)
+{
+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
+	pci_unblock_user_cfg_access(pdev);
+#else
+	pci_cfg_access_unlock(pdev);
+#endif
+}
+
 #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
 /* Check if INTX works to control irq's.
  * Set's INTX_DISABLE flag and reads it back
-- 
1.7.10.4

Re: [dpdk-dev] [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers

[Stephen Hemminger]

On Mon, 21 Jul 2014 18:03:53 +0600
Yerden Zhumabekov <e_zhumabekov@sts.kz> wrote:

> Since PCI config lock/unlock functions were renamed in linux kernel,
> these wrappers are introduced to reflect this change.
> 
> Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
> ---
>  lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   20 ++++++++++++++++++++
>  1 file changed, 20 insertions(+)
> 
> diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> index 02545d9..605410e 100644
> --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> @@ -223,6 +223,26 @@ static const struct attribute_group dev_attr_grp = {
>  	.attrs = dev_attrs,
>  };
>  
> +static inline void
> +pci_config_lock(struct pci_dev *pdev)
> +{
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
> +	pci_block_user_cfg_access(pdev);
> +#else
> +	pci_cfg_access_lock(pdev);
> +#endif
> +}
> +
> +static inline void
> +pci_config_unlock(struct pci_dev *pdev)
> +{
> +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
> +	pci_unblock_user_cfg_access(pdev);
> +#else
> +	pci_cfg_access_unlock(pdev);
> +#endif
> +}
> +
>  #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
>  /* Check if INTX works to control irq's.
>   * Set's INTX_DISABLE flag and reads it back

Rather than have wrapper's which have to live forever.
Please create backward compatability stub's.

My goal is to be able to unifdef out all the version checks and
submit a version to upstream mainline kernel.

Re: [dpdk-dev] [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers

[Thomas Monjalon]

2014-07-21 13:42, Stephen Hemminger:
> On Mon, 21 Jul 2014 18:03:53 +0600
> Yerden Zhumabekov <e_zhumabekov@sts.kz> wrote:
> 
> > Since PCI config lock/unlock functions were renamed in linux kernel,
> > these wrappers are introduced to reflect this change.
> 
> Rather than have wrapper's which have to live forever.
> Please create backward compatability stub's.
> 
> My goal is to be able to unifdef out all the version checks and
> submit a version to upstream mainline kernel.

Please Stephen, could you try to send a v2 based on Yerden's patches?

Thanks
-- 
Thomas

Re: [dpdk-dev] [igb_uio PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers

[Thomas Monjalon]

2014-07-21 13:42, Stephen Hemminger:
> On Mon, 21 Jul 2014 18:03:53 +0600
> Yerden Zhumabekov <e_zhumabekov@sts.kz> wrote:
> 
> > Since PCI config lock/unlock functions were renamed in linux kernel,
> > these wrappers are introduced to reflect this change.
> > 
> > Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
> > ---
> >  lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   20 ++++++++++++++++++++
> >  1 file changed, 20 insertions(+)
> > 
> > diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > index 02545d9..605410e 100644
> > --- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > +++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
> > @@ -223,6 +223,26 @@ static const struct attribute_group dev_attr_grp = {
> >  	.attrs = dev_attrs,
> >  };
> >  
> > +static inline void
> > +pci_config_lock(struct pci_dev *pdev)
> > +{
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
> > +	pci_block_user_cfg_access(pdev);
> > +#else
> > +	pci_cfg_access_lock(pdev);
> > +#endif
> > +}
> > +
> > +static inline void
> > +pci_config_unlock(struct pci_dev *pdev)
> > +{
> > +#if LINUX_VERSION_CODE < KERNEL_VERSION(3,3,0)
> > +	pci_unblock_user_cfg_access(pdev);
> > +#else
> > +	pci_cfg_access_unlock(pdev);
> > +#endif
> > +}
> > +
> >  #if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
> >  /* Check if INTX works to control irq's.
> >   * Set's INTX_DISABLE flag and reads it back
> 
> Rather than have wrapper's which have to live forever.
> Please create backward compatability stub's.
> 
> My goal is to be able to unifdef out all the version checks and
> submit a version to upstream mainline kernel.

I replace this patch by these simple fallbacks:

#if LINUX_VERSION_CODE < KERNEL_VERSION(3, 3, 0)
#define pci_cfg_access_lock   pci_block_user_cfg_access
#define pci_cfg_access_unlock pci_unblock_user_cfg_access
#endif

-- 
Thomas

[dpdk-dev] [igb_uio PATCH 3/3] igb_uio: renaming pci config lock/unlock functions

[Yerden Zhumabekov]

renaming pci config lock/unlock functions using wrappers introduced
in commit f57049874f61046641a8eb1e9832810cc33befe5

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
index 605410e..418bfa2 100644
--- a/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
+++ b/lib/librte_eal/linuxapp/igb_uio/igb_uio.c
@@ -148,11 +148,11 @@ store_extended_tag(struct device *dev,
 	else
 		return -EINVAL;
 
-	pci_cfg_access_lock(pci_dev);
+	pci_config_lock(pci_dev);
 	pci_bus_read_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CAP_REG, &val);
 	if (!(val & PCI_DEV_CAP_EXT_TAG_MASK)) { /* Not supported */
-		pci_cfg_access_unlock(pci_dev);
+		pci_config_unlock(pci_dev);
 		return -EPERM;
 	}
 
@@ -165,7 +165,7 @@ store_extended_tag(struct device *dev,
 		val &= ~PCI_DEV_CTRL_EXT_TAG_MASK;
 	pci_bus_write_config_dword(pci_dev->bus, pci_dev->devfn,
 					PCI_DEV_CTRL_REG, val);
-	pci_cfg_access_unlock(pci_dev);
+	pci_config_unlock(pci_dev);
 
 	return count;
 }
@@ -252,7 +252,7 @@ static bool pci_intx_mask_supported(struct pci_dev *pdev)
 	bool mask_supported = false;
 	uint16_t orig, new;
 
-	pci_block_user_cfg_access(pdev);
+	pci_config_lock(pdev);
 	pci_read_config_word(pdev, PCI_COMMAND, &orig);
 	pci_write_config_word(pdev, PCI_COMMAND,
 			      orig ^ PCI_COMMAND_INTX_DISABLE);
@@ -265,7 +265,7 @@ static bool pci_intx_mask_supported(struct pci_dev *pdev)
 		mask_supported = true;
 		pci_write_config_word(pdev, PCI_COMMAND, orig);
 	}
-	pci_unblock_user_cfg_access(pdev);
+	pci_config_unlock(pdev);
 
 	return mask_supported;
 }
@@ -275,7 +275,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 	bool pending;
 	uint32_t status;
 
-	pci_block_user_cfg_access(pdev);
+	pci_config_lock(pdev);
 	pci_read_config_dword(pdev, PCI_COMMAND, &status);
 
 	/* interrupt is not ours, goes to out */
@@ -292,7 +292,7 @@ static bool pci_check_and_mask_intx(struct pci_dev *pdev)
 		if (old != new)
 			pci_write_config_word(pdev, PCI_COMMAND, new);
 	}
-	pci_unblock_user_cfg_access(pdev);
+	pci_config_unlock(pdev);
 
 	return pending;
 }
@@ -357,7 +357,7 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 	struct rte_uio_pci_dev *udev = igbuio_get_uio_pci_dev(info);
 	struct pci_dev *pdev = udev->pdev;
 
-	pci_cfg_access_lock(pdev);
+	pci_config_lock(pdev);
 	if (udev->mode == RTE_INTR_MODE_LEGACY)
 		pci_intx(pdev, !!irq_state);
 	else if (udev->mode == RTE_INTR_MODE_MSI) {
@@ -370,7 +370,7 @@ igbuio_pci_irqcontrol(struct uio_info *info, s32 irq_state)
 		list_for_each_entry(desc, &pdev->msi_list, list)
 			igbuio_msix_mask_irq(desc, irq_state);
 	}
-	pci_cfg_access_unlock(pdev);
+	pci_config_unlock(pdev);
 
 	return 0;
 }
-- 
1.7.10.4

Re: [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Thomas Monjalon]

Please Stephen,

Could you comment or ack these patches?
A quick answer would be appreciated as build is currently broken
with old kernels.

2014-07-21 18:03, Yerden Zhumabekov:
> Since PCI config lock/unlock functions were renamed in linux kernel,
> wrappers are introduced to reflect this change.
> 
> Fixed a few typos.
> 
> 
> Yerden Zhumabekov (3):
>   igb_uio: fixed typos
>   igb_uio: pci_config_lock/pci_config_unlock wrappers
>   igb_uio: renaming pci config lock/unlock functions


Thanks
-- 
Thomas

Re: [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Thomas Monjalon]

> Yerden Zhumabekov (3):
>   igb_uio: fixed typos

Acked-by: Thomas Monjalon <thomas.monjalon@6wind.com>

>   igb_uio: pci_config_lock/pci_config_unlock wrappers
>   igb_uio: renaming pci config lock/unlock functions

These patches are replaced by a simple fallback which do not touch
functions for upstream version (as requested by Stephen):
	http://dpdk.org/browse/dpdk/commit/?id=484c308d3c8bc5f74

The compilation with old kernels should be fixed now.
If some distributions have backported the new PCI config locking functions,
the compilation may fail. Please report such errors.

Thanks
-- 
Thomas

Re: [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Thomas Monjalon]

2014-07-22 15:07, Thomas Monjalon:
> The compilation with old kernels should be fixed now.
> If some distributions have backported the new PCI config locking functions,
> the compilation may fail. Please report such errors.

Compilation with RHEL6 is broken because of some backported functions,
some unknown MSIX values and some MSI functions missing.

include/linux/pci.h:1572: note: previous declaration of ‘pci_num_vf’ was here
include/linux/pci.h:868: note: previous declaration of ‘pci_intx_mask_supported’ was here
include/linux/pci.h:869: note: previous declaration of ‘pci_check_and_mask_intx’ was here
igb_uio.c:294: error: ‘PCI_MSIX_ENTRY_SIZE’ undeclared (first use in this function)
igb_uio.c:295: error: ‘PCI_MSIX_ENTRY_VECTOR_CTRL’ undeclared (first use in this function)
igb_uio.c:298: error: ‘PCI_MSIX_ENTRY_CTRL_MASKBIT’ undeclared (first use in this function)
igb_uio.c:312: error: implicit declaration of function ‘irq_data_get_msi’
igb_uio.c:350: error: implicit declaration of function ‘irq_get_irq_data’

If someone has time to fix it, patch is welcome.

Thanks
-- 
Thomas

Re: [dpdk-dev] [igb_uio PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Stephen Hemminger]

On Thu, 24 Jul 2014 23:50:43 +0200
Thomas Monjalon <thomas.monjalon@6wind.com> wrote:

> 2014-07-22 15:07, Thomas Monjalon:
> > The compilation with old kernels should be fixed now.
> > If some distributions have backported the new PCI config locking functions,
> > the compilation may fail. Please report such errors.
> 
> Compilation with RHEL6 is broken because of some backported functions,
> some unknown MSIX values and some MSI functions missing.
> 
> include/linux/pci.h:1572: note: previous declaration of ‘pci_num_vf’ was here
> include/linux/pci.h:868: note: previous declaration of ‘pci_intx_mask_supported’ was here
> include/linux/pci.h:869: note: previous declaration of ‘pci_check_and_mask_intx’ was here
> igb_uio.c:294: error: ‘PCI_MSIX_ENTRY_SIZE’ undeclared (first use in this function)
> igb_uio.c:295: error: ‘PCI_MSIX_ENTRY_VECTOR_CTRL’ undeclared (first use in this function)
> igb_uio.c:298: error: ‘PCI_MSIX_ENTRY_CTRL_MASKBIT’ undeclared (first use in this function)
> igb_uio.c:312: error: implicit declaration of function ‘irq_data_get_msi’
> igb_uio.c:350: error: implicit declaration of function ‘irq_get_irq_data’
> 
> If someone has time to fix it, patch is welcome.
> 
> Thanks

I will fix for Debian Squeeze, don't do RHEL

[dpdk-dev] [PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Yerden Zhumabekov]

Since PCI config lock/unlock functions were renamed in linux kernel,
wrappers are introduced to reflect this change.

Fixed a few typos.

Patches attached, not inlined. :)

Yerden Zhumabekov (3):
  igb_uio: fixed typos
  igb_uio: pci_config_lock/pci_config_unlock wrappers
  igb_uio: renaming pci config lock/unlock functions

 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   54 ++++++++++++++++++++---------
 1 file changed, 38 insertions(+), 16 deletions(-)

-- 
1.7.10.4

[dpdk-dev] [PATCH 1/3] igb_uio: fixed typos

[Yerden Zhumabekov]

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)

[dpdk-dev] [PATCH 2/3] igb_uio: pci_config_lock/pci_config_unlock wrappers

[Yerden Zhumabekov]

Since PCI config lock/unlock functions were renamed in linux kernel,
these wrappers are introduced to reflect this change.

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

[dpdk-dev] [PATCH 3/3] igb_uio: renaming pci config lock/unlock functions

[Yerden Zhumabekov]

renaming pci config lock/unlock functions using wrappers introduced
in commit f57049874f61046641a8eb1e9832810cc33befe5

Signed-off-by: Yerden Zhumabekov <e_zhumabekov@sts.kz>
---
 lib/librte_eal/linuxapp/igb_uio/igb_uio.c |   18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

Re: [dpdk-dev] [PATCH 0/3] igb_uio: fixed typos and pci lock/unlock calls

[Thomas Monjalon]

2014-07-21 21:38, Yerden Zhumabekov:
> Since PCI config lock/unlock functions were renamed in linux kernel,
> wrappers are introduced to reflect this change.
> 
> Fixed a few typos.

Why did you send again the patches ?
Do you have any change since the previous serie?

> Patches attached, not inlined. :)

Please, no attachment. They are filtered out by the mailing list.
The result is an empty patch.

-- 
Thomas