From: Huawei Xie <huawei.xie@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 3/3] examples/vhost: add new vhost example
Date: Tue, 5 Aug 2014 23:58:06 +0800 [thread overview]
Message-ID: <1407254286-23972-4-git-send-email-huawei.xie@intel.com> (raw)
In-Reply-To: <1407254286-23972-1-git-send-email-huawei.xie@intel.com>
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
---
examples/vhost/Makefile | 52 +
examples/vhost/libvirt/qemu-wrap.py | 366 +++++
examples/vhost/main.c | 3047 +++++++++++++++++++++++++++++++++++
examples/vhost/main.h | 109 ++
4 files changed, 3574 insertions(+)
create mode 100644 examples/vhost/Makefile
create mode 100755 examples/vhost/libvirt/qemu-wrap.py
create mode 100644 examples/vhost/main.c
create mode 100644 examples/vhost/main.h
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
new file mode 100644
index 0000000..a4d4fb0
--- /dev/null
+++ b/examples/vhost/Makefile
@@ -0,0 +1,52 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# binary name
+APP = vhost-switch
+
+# all source are stored in SRCS-y
+#SRCS-y := cusedrv.c loopback-userspace.c
+SRCS-y := main.c
+
+CFLAGS += -O2 -I/usr/local/include -D_FILE_OFFSET_BITS=64 -Wno-unused-parameter
+CFLAGS += $(WERROR_FLAGS)
+LDFLAGS += -lfuse
+
+include $(RTE_SDK)/mk/rte.extapp.mk
diff --git a/examples/vhost/libvirt/qemu-wrap.py b/examples/vhost/libvirt/qemu-wrap.py
new file mode 100755
index 0000000..8d820be
--- /dev/null
+++ b/examples/vhost/libvirt/qemu-wrap.py
@@ -0,0 +1,366 @@
+#!/usr/bin/python
+#/*
+# * BSD LICENSE
+# *
+# * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# * All rights reserved.
+# *
+# * Redistribution and use in source and binary forms, with or without
+# * modification, are permitted provided that the following conditions
+# * are met:
+# *
+# * * Redistributions of source code must retain the above copyright
+# * notice, this list of conditions and the following disclaimer.
+# * * Redistributions in binary form must reproduce the above copyright
+# * notice, this list of conditions and the following disclaimer in
+# * the documentation and/or other materials provided with the
+# * distribution.
+# * * Neither the name of Intel Corporation nor the names of its
+# * contributors may be used to endorse or promote products derived
+# * from this software without specific prior written permission.
+# *
+# * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# */
+
+#####################################################################
+# This script is designed to modify the call to the QEMU emulator
+# to support userspace vhost when starting a guest machine through
+# libvirt with vhost enabled. The steps to enable this are as follows
+# and should be run as root:
+#
+# 1. Place this script in a libvirtd's binary search PATH ($PATH)
+# A good location would be in the same directory that the QEMU
+# binary is located
+#
+# 2. Ensure that the script has the same owner/group and file
+# permissions as the QEMU binary
+#
+# 3. Update the VM xml file using "virsh edit VM.xml"
+#
+# 3.a) Set the VM to use the launch script
+#
+# Set the emulator path contained in the
+# <emulator><emulator/> tags
+#
+# e.g replace <emulator>/usr/bin/qemu-kvm<emulator/>
+# with <emulator>/usr/bin/qemu-wrap.py<emulator/>
+#
+# 3.b) Set the VM's device's to use vhost-net offload
+#
+# <interface type="network">
+# <model type="virtio"/>
+# <driver name="vhost"/>
+# <interface/>
+#
+# 4. Enable libvirt to access our userpace device file by adding it to
+# controllers cgroup for libvirtd using the following steps
+#
+# 4.a) In /etc/libvirt/qemu.conf add/edit the following lines:
+# 1) cgroup_controllers = [ ... "devices", ... ]
+# 2) clear_emulator_capabilities = 0
+# 3) user = "root"
+# 4) group = "root"
+# 5) cgroup_device_acl = [
+# "/dev/null", "/dev/full", "/dev/zero",
+# "/dev/random", "/dev/urandom",
+# "/dev/ptmx", "/dev/kvm", "/dev/kqemu",
+# "/dev/rtc", "/dev/hpet", "/dev/net/tun",
+# "/dev/<devbase-name>-<index>",
+# ]
+#
+# 4.b) Disable SELinux or set to permissive mode
+#
+# 4.c) Mount cgroup device controller
+# "mkdir /dev/cgroup"
+# "mount -t cgroup none /dev/cgroup -o devices"
+#
+# 4.d) Set hugetlbfs_mount variable - ( Optional )
+# VMs using userspace vhost must use hugepage backed
+# memory. This can be enabled in the libvirt XML
+# config by adding a memory backing section to the
+# XML config e.g.
+# <memoryBacking>
+# <hugepages/>
+# </memoryBacking>
+# This memory backing section should be added after the
+# <memory> and <currentMemory> sections. This will add
+# flags "-mem-prealloc -mem-path <path>" to the QEMU
+# command line. The hugetlbfs_mount variable can be used
+# to override the default <path> passed through by libvirt.
+#
+# if "-mem-prealloc" or "-mem-path <path>" are not passed
+# through and a vhost device is detected then these options will
+# be automatically added by this script. This script will detect
+# the system hugetlbfs mount point to be used for <path>. The
+# default <path> for this script can be overidden by the
+# hugetlbfs_dir variable in the configuration section of this script.
+#
+#
+# 4.e) Restart the libvirtd system process
+# e.g. on Fedora "systemctl restart libvirtd.service"
+#
+#
+# 4.f) Edit the Configuration Parameters section of this script
+# to point to the correct emulator location and set any
+# addition options
+#
+# The script modifies the libvirtd Qemu call by modifying/adding
+# options based on the configuration parameters below.
+# NOTE:
+# emul_path and us_vhost_path must be set
+# All other parameters are optional
+#####################################################################
+
+
+#############################################
+# Configuration Parameters
+#############################################
+#Path to QEMU binary
+emul_path = "/usr/local/bin/qemu-system-x86_64"
+
+#Path to userspace vhost device file
+# This filename should match the --dev-basename --dev-index parameters of
+# the command used to launch the userspace vhost sample application e.g.
+# if the sample app lauch command is:
+# ./build/vhost-switch ..... --dev-basename usvhost --dev-index 1
+# then this variable should be set to:
+# us_vhost_path = "/dev/usvhost-1"
+us_vhost_path = "/dev/usvhost-1"
+
+#List of additional user defined emulation options. These options will
+#be added to all Qemu calls
+emul_opts_user = []
+
+#List of additional user defined emulation options for vhost only.
+#These options will only be added to vhost enabled guests
+emul_opts_user_vhost = []
+
+#For all VHOST enabled VMs, the VM memory is preallocated from hugetlbfs
+# Set this variable to one to enable this option for all VMs
+use_huge_all = 0
+
+#Instead of autodetecting, override the hugetlbfs directory by setting
+#this variable
+hugetlbfs_dir = ""
+
+#############################################
+
+
+#############################################
+# ****** Do Not Modify Below this Line ******
+#############################################
+
+import sys, os, subprocess
+
+
+#List of open userspace vhost file descriptors
+fd_list = []
+
+#additional virtio device flags when using userspace vhost
+vhost_flags = [ "csum=off",
+ "gso=off",
+ "guest_tso4=off",
+ "guest_tso6=off",
+ "guest_ecn=off"
+ ]
+
+
+#############################################
+# Find the system hugefile mount point.
+# Note:
+# if multiple hugetlbfs mount points exist
+# then the first one found will be used
+#############################################
+def find_huge_mount():
+
+ if (len(hugetlbfs_dir)):
+ return hugetlbfs_dir
+
+ huge_mount = ""
+
+ if (os.access("/proc/mounts", os.F_OK)):
+ f = open("/proc/mounts", "r")
+ line = f.readline()
+ while line:
+ line_split = line.split(" ")
+ if line_split[2] == 'hugetlbfs':
+ huge_mount = line_split[1]
+ break
+ line = f.readline()
+ else:
+ print "/proc/mounts not found"
+ exit (1)
+
+ f.close
+ if len(huge_mount) == 0:
+ print "Failed to find hugetlbfs mount point"
+ exit (1)
+
+ return huge_mount
+
+
+#############################################
+# Get a userspace Vhost file descriptor
+#############################################
+def get_vhost_fd():
+
+ if (os.access(us_vhost_path, os.F_OK)):
+ fd = os.open( us_vhost_path, os.O_RDWR)
+ else:
+ print ("US-Vhost file %s not found" %us_vhost_path)
+ exit (1)
+
+ return fd
+
+
+#############################################
+# Check for vhostfd. if found then replace
+# with our own vhost fd and append any vhost
+# flags onto the end
+#############################################
+def modify_netdev_arg(arg):
+
+ global fd_list
+ vhost_in_use = 0
+ s = ''
+ new_opts = []
+ netdev_opts = arg.split(",")
+
+ for opt in netdev_opts:
+ #check if vhost is used
+ if "vhost" == opt[:5]:
+ vhost_in_use = 1
+ else:
+ new_opts.append(opt)
+
+ #if using vhost append vhost options
+ if vhost_in_use == 1:
+ #append vhost on option
+ new_opts.append('vhost=on')
+ #append vhostfd ption
+ new_fd = get_vhost_fd()
+ new_opts.append('vhostfd=' + str(new_fd))
+ fd_list.append(new_fd)
+
+ #concatenate all options
+ for opt in new_opts:
+ if len(s) > 0:
+ s+=','
+
+ s+=opt
+
+ return s
+
+
+#############################################
+# Main
+#############################################
+def main():
+
+ global fd_list
+ global vhost_in_use
+ new_args = []
+ num_cmd_args = len(sys.argv)
+ emul_call = ''
+ mem_prealloc_set = 0
+ mem_path_set = 0
+ num = 0;
+
+ #parse the parameters
+ while (num < num_cmd_args):
+ arg = sys.argv[num]
+
+ #Check netdev +1 parameter for vhostfd
+ if arg == '-netdev':
+ num_vhost_devs = len(fd_list)
+ new_args.append(arg)
+
+ num+=1
+ arg = sys.argv[num]
+ mod_arg = modify_netdev_arg(arg)
+ new_args.append(mod_arg)
+
+ #append vhost flags if this is a vhost device
+ # and -device is the next arg
+ # i.e -device -opt1,-opt2,...,-opt3,%vhost
+ if (num_vhost_devs < len(fd_list)):
+ num+=1
+ arg = sys.argv[num]
+ if arg == '-device':
+ new_args.append(arg)
+ num+=1
+ new_arg = sys.argv[num]
+ for flag in vhost_flags:
+ new_arg = ''.join([new_arg,',',flag])
+ new_args.append(new_arg)
+ else:
+ new_args.append(arg)
+ elif arg == '-mem-prealloc':
+ mem_prealloc_set = 1
+ new_args.append(arg)
+ elif arg == '-mem-path':
+ mem_path_set = 1
+ new_args.append(arg)
+
+ else:
+ new_args.append(arg)
+
+ num+=1
+
+ #Set Qemu binary location
+ emul_call+=emul_path
+ emul_call+=" "
+
+ #Add prealloc mem options if using vhost and not already added
+ if ((len(fd_list) > 0) and (mem_prealloc_set == 0)):
+ emul_call += "-mem-prealloc "
+
+ #Add mempath mem options if using vhost and not already added
+ if ((len(fd_list) > 0) and (mem_path_set == 0)):
+ #Detect and add hugetlbfs mount point
+ mp = find_huge_mount()
+ mp = "".join(["-mem-path ", mp])
+ emul_call += mp
+ emul_call += " "
+
+
+ #add user options
+ for opt in emul_opts_user:
+ emul_call += opt
+ emul_call += " "
+
+ #Add add user vhost only options
+ if len(fd_list) > 0:
+ for opt in emul_opts_user_vhost:
+ emul_call += opt
+ emul_call += " "
+
+ #Add updated libvirt options
+ iter_args = iter(new_args)
+ #skip 1st arg i.e. call to this script
+ next(iter_args)
+ for arg in iter_args:
+ emul_call+=str(arg)
+ emul_call+= " "
+
+ #Call QEMU
+ subprocess.call(emul_call, shell=True)
+
+
+ #Close usvhost files
+ for fd in fd_list:
+ os.close(fd)
+
+
+if __name__ == "__main__":
+ main()
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
new file mode 100644
index 0000000..2a8cdc9
--- /dev/null
+++ b/examples/vhost/main.c
@@ -0,0 +1,3047 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arpa/inet.h>
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_malloc.h>
+#include <rte_virtio_net.h>
+
+#include "main.h"
+
+#define MAX_QUEUES 128
+
+/* #define VHOST_DEBUG */
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER2
+#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER3
+
+
+#ifdef VHOST_DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) RTE_LOG(DEBUG, log_type, fmt, ##args)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#endif
+
+
+/* the maximum number of external ports supported */
+#define MAX_SUP_PORTS 1
+
+/*
+ * Calculate the number of buffers needed per port
+ */
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
+ (num_switching_cores*MAX_PKT_BURST) + \
+ (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) + \
+ (num_switching_cores*MBUF_CACHE_SIZE))
+
+#define MBUF_CACHE_SIZE 128
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+/*
+ * No frame data buffer allocated from host are required for zero copy
+ * implementation, guest will allocate the frame data buffer, and vhost
+ * directly use it.
+ */
+#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
+#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
+ + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE_ZCP 0
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
+#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
+
+#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
+#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING 0
+#define DEVICE_RX 1
+#define DEVICE_SAFE_REMOVE 2
+
+/* Config_core_flag status definitions. */
+#define REQUEST_DEV_REMOVAL 1
+#define ACK_DEV_REMOVAL 0
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/*
+ * Need refine these 2 macros for legacy and DPDK based front end:
+ * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
+ * And then adjust power 2.
+ */
+/*
+ * For legacy front end, 128 descriptors,
+ * half for virtio header, another half for mbuf.
+ */
+#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
+#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
+
+/* Get first 4 bytes in mbuf headroom. */
+#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
+ + sizeof(struct rte_mbuf)))
+
+/* true if x is a power of 2 */
+#define POWEROF2(x) ((((x)-1) & (x)) == 0)
+
+#define INVALID_PORT_ID 0xFF
+
+/* Max number of devices. Limited by vmdq. */
+#define MAX_DEVICES 64
+
+/* Size of buffers used for snprintfs. */
+#define MAX_PRINT_BUFF 6072
+
+/* Maximum character device basename size. */
+#define MAX_BASENAME_SZ 10
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+/* Number of descriptors per cacheline. */
+#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask;
+
+/*Number of switching cores enabled*/
+static uint32_t num_switching_cores;
+
+/* number of devices/queues to support*/
+static uint32_t num_queues;
+static uint32_t num_devices;
+
+/*
+ * Enable zero copy, pkts buffer will directly dma to hw descriptor,
+ * disabled on default.
+ */
+static uint32_t zero_copy;
+static int mergeable;
+
+
+/* number of descriptors to apply*/
+static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
+static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
+
+/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
+#define MAX_RING_DESC 4096
+
+struct vpool {
+ struct rte_mempool *pool;
+ struct rte_ring *ring;
+ uint32_t buf_size;
+} vpool_array[MAX_QUEUES+MAX_QUEUES];
+
+/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
+enum vm2vm_type {
+ VM2VM_DISABLED = 0,
+ VM2VM_SOFTWARE = 1,
+ VM2VM_HARDWARE = 2,
+ VM2VM_LAST
+};
+static enum vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
+
+/* The type of host physical address translated from guest physical address. */
+enum hpa_type {
+ PHYS_ADDR_CONTINUOUS = 0,
+ PHYS_ADDR_CROSS_SUBREG = 1,
+ PHYS_ADDR_INVALID = 2,
+ PHYS_ADDR_LAST
+};
+
+/* Enable stats. */
+static uint32_t enable_stats;
+/* Enable retries on RX. */
+static uint32_t enable_retry;
+/* Specify timeout (in useconds) between retries on RX. */
+static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
+/* Specify the number of retries on RX. */
+static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
+
+/* Character device basename. Can be set by user. */
+static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
+
+/* Default configuration for rx and tx thresholds etc. */
+static struct rte_eth_rxconf rx_conf_default = {
+ .rx_thresh = {
+ .pthresh = RX_PTHRESH,
+ .hthresh = RX_HTHRESH,
+ .wthresh = RX_WTHRESH,
+ },
+ .rx_drop_en = 1,
+};
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+static struct rte_eth_txconf tx_conf_default = {
+ .tx_thresh = {
+ .pthresh = TX_PTHRESH,
+ .hthresh = TX_HTHRESH,
+ .wthresh = TX_WTHRESH,
+ },
+ .tx_free_thresh = 0, /* Use PMD default values */
+ .tx_rs_thresh = 0, /* Use PMD default values */
+};
+
+/* empty vmdq configuration structure. Filled in programatically */
+static struct rte_eth_conf vmdq_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ /*
+ * It is necessary for 1G NIC such as I350,
+ * this fixes bug of ipv4 forwarding in guest can't
+ * forward pakets from one virtio dev to another virtio dev.
+ */
+ .hw_vlan_strip = 1, /**< VLAN strip enabled. */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+ .rx_adv_conf = {
+ /*
+ * should be overridden separately in code with
+ * appropriate values
+ */
+ .vmdq_rx_conf = {
+ .nb_queue_pools = ETH_8_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ },
+ },
+};
+
+static unsigned lcore_ids[RTE_MAX_LCORE];
+static uint8_t ports[RTE_MAX_ETHPORTS];
+static unsigned num_ports; /**< The number of ports specified in command line */
+
+static const uint16_t external_pkt_default_vlan_tag = 2000;
+const uint16_t vlan_tags[] = {
+ 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
+ 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
+ 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
+ 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
+ 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
+ 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
+ 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
+ 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
+};
+
+/* ethernet addresses of ports */
+static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* heads for the main used and free linked lists for the data path. */
+static struct virtio_net_data_ll *ll_root_used;
+static struct virtio_net_data_ll *ll_root_free;
+
+/* Array of data core structures containing information on individual core linked lists. */
+static struct lcore_info lcore_info[RTE_MAX_LCORE];
+
+/* Used for queueing bursts of TX packets. */
+struct mbuf_table {
+ unsigned len;
+ unsigned txq_id;
+ struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+/* TX queue for each data core. */
+struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
+
+/* TX queue fori each virtio device for zero copy. */
+struct mbuf_table tx_queue_zcp[MAX_QUEUES];
+
+/* Vlan header struct used to insert vlan tags on TX. */
+struct vlan_ethhdr {
+ unsigned char h_dest[ETH_ALEN];
+ unsigned char h_source[ETH_ALEN];
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ __be16 h_vlan_encapsulated_proto;
+};
+
+/* IPv4 Header */
+struct ipv4_hdr {
+ uint8_t version_ihl; /**< version and header length */
+ uint8_t type_of_service; /**< type of service */
+ uint16_t total_length; /**< length of packet */
+ uint16_t packet_id; /**< packet ID */
+ uint16_t fragment_offset; /**< fragmentation offset */
+ uint8_t time_to_live; /**< time to live */
+ uint8_t next_proto_id; /**< protocol ID */
+ uint16_t hdr_checksum; /**< header checksum */
+ uint32_t src_addr; /**< source address */
+ uint32_t dst_addr; /**< destination address */
+} __attribute__((__packed__));
+
+/* Header lengths. */
+#define VLAN_HLEN 4
+#define VLAN_ETH_HLEN 18
+
+/* Per-device statistics struct */
+struct device_statistics {
+ uint64_t tx_total;
+ rte_atomic64_t rx_total_atomic;
+ uint64_t rx_total;
+ uint64_t tx;
+ rte_atomic64_t rx_atomic;
+ uint64_t rx;
+} __rte_cache_aligned;
+struct device_statistics dev_statistics[MAX_DEVICES];
+
+/*
+ * Builds up the correct configuration for VMDQ VLAN pool map
+ * according to the pool & queue limits.
+ */
+static inline int
+get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
+{
+ struct rte_eth_vmdq_rx_conf conf;
+ unsigned i;
+
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
+ conf.nb_pool_maps = num_devices;
+ conf.enable_loop_back =
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
+
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[i];
+ conf.pool_map[i].pools = (1UL << i);
+ }
+
+ (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
+ (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
+ sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+ return 0;
+}
+
+/*
+ * Validate the device number according to the max pool number gotten form
+ * dev_info. If the device number is invalid, give the error message and
+ * return -1. Each device must have its own pool.
+ */
+static inline int
+validate_num_devices(uint32_t max_nb_devices)
+{
+ if (num_devices > max_nb_devices) {
+ RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf port_conf;
+ uint16_t rx_rings, tx_rings;
+ uint16_t rx_ring_size, tx_ring_size;
+ int retval;
+ uint16_t q;
+
+ /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
+ rte_eth_dev_info_get(port, &dev_info);
+
+ /*configure the number of supported virtio devices based on VMDQ limits */
+ num_devices = dev_info.max_vmdq_pools;
+ num_queues = dev_info.max_rx_queues;
+
+ if (zero_copy) {
+ rx_ring_size = num_rx_descriptor;
+ tx_ring_size = num_tx_descriptor;
+ tx_rings = dev_info.max_tx_queues;
+ } else {
+ rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
+ tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+ tx_rings = (uint16_t)rte_lcore_count();
+ }
+
+ retval = validate_num_devices(MAX_DEVICES);
+ if (retval < 0)
+ return retval;
+
+ /* Get port configuration. */
+ retval = get_eth_conf(&port_conf, num_devices);
+ if (retval < 0)
+ return retval;
+
+ if (port >= rte_eth_dev_count())
+ return -1;
+
+ rx_rings = (uint16_t)num_queues,
+ /* Configure ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Setup the queues. */
+ for (q = 0; q < rx_rings; q++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+ rte_eth_dev_socket_id(port), &rx_conf_default,
+ vpool_array[q].pool);
+ if (retval < 0)
+ return retval;
+ }
+ for (q = 0; q < tx_rings; q++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+ rte_eth_dev_socket_id(port), &tx_conf_default);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the device. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0) {
+ RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
+ return retval;
+ }
+
+ rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
+ RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ vmdq_ports_eth_addr[port].addr_bytes[0],
+ vmdq_ports_eth_addr[port].addr_bytes[1],
+ vmdq_ports_eth_addr[port].addr_bytes[2],
+ vmdq_ports_eth_addr[port].addr_bytes[3],
+ vmdq_ports_eth_addr[port].addr_bytes[4],
+ vmdq_ports_eth_addr[port].addr_bytes[5]);
+
+ return 0;
+}
+
+/*
+ * Set character device basename.
+ */
+static int
+us_vhost_parse_basename(const char *q_arg)
+{
+ /* parse number string */
+
+ if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
+ return -1;
+ else
+ snprintf((char *)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
+
+ return 0;
+}
+
+/*
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ errno = 0;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+
+}
+
+/*
+ * Parse num options at run time.
+ */
+static int
+parse_num_opt(const char *q_arg, uint32_t max_valid_value)
+{
+ char *end = NULL;
+ unsigned long num;
+
+ errno = 0;
+
+ /* parse unsigned int string */
+ num = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (num > max_valid_value)
+ return -1;
+
+ return num;
+
+}
+
+/*
+ * Display usage
+ */
+static void
+us_vhost_usage(const char *prgname)
+{
+ RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+ " --vm2vm [0|1|2]\n"
+ " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
+ " --dev-basename <name> --dev-index [0-N]\n"
+ " --nb-devices ND\n"
+ " -p PORTMASK: Set mask for ports to be used by application\n"
+ " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
+ " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
+ " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
+ " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
+ " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
+ " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
+ " --dev-basename: The basename to be used for the character device.\n"
+ " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
+ " --zero-copy [0|1]: disable(default)/enable rx/tx "
+ "zero copy\n"
+ " --rx-desc-num [0-N]: the number of descriptors on rx, "
+ "used only when zero copy is enabled.\n"
+ " --tx-desc-num [0-N]: the number of descriptors on tx, "
+ "used only when zero copy is enabled.\n",
+ prgname);
+}
+
+/*
+ * Parse the arguments given in the command line of the application.
+ */
+static int
+us_vhost_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ int option_index;
+ unsigned i;
+ const char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"vm2vm", required_argument, NULL, 0},
+ {"rx-retry", required_argument, NULL, 0},
+ {"rx-retry-delay", required_argument, NULL, 0},
+ {"rx-retry-num", required_argument, NULL, 0},
+ {"mergeable", required_argument, NULL, 0},
+ {"stats", required_argument, NULL, 0},
+ {"dev-basename", required_argument, NULL, 0},
+ {"dev-index", required_argument, NULL, 0},
+ {"zero-copy", required_argument, NULL, 0},
+ {"rx-desc-num", required_argument, NULL, 0},
+ {"tx-desc-num", required_argument, NULL, 0},
+ {NULL, 0, 0, 0},
+ };
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:", long_option, &option_index)) != EOF) {
+ switch (opt) {
+ /* Portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case 0:
+ /* Enable/disable vm2vm comms. */
+ if (!strncmp(long_option[option_index].name, "vm2vm",
+ MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for "
+ "vm2vm [0|1|2]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ vm2vm_mode = (enum vm2vm_type)ret;
+ }
+ }
+
+ /* Enable/disable retries on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_retry = ret;
+ }
+ }
+
+ /* Specify the retries delay time (in useconds) on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_delay_time = ret;
+ }
+ }
+
+ /* Specify the retries number on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_retry_num = ret;
+ }
+ }
+
+ /* Enable/disable RX mergeable buffers. */
+ if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ mergeable = !!ret;
+ }
+
+ /* Enable/disable stats. */
+ if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_stats = ret;
+ }
+ }
+
+ /* Set character device basename. */
+ if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
+ if (us_vhost_parse_basename(optarg) == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ /* Enable/disable rx/tx zero copy. */
+ if (!strncmp(long_option[option_index].name,
+ "zero-copy", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument"
+ " for zero-copy [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ zero_copy = ret;
+
+ if (zero_copy) {
+#ifdef RTE_MBUF_SCATTER_GATHER
+ RTE_LOG(ERR, VHOST_CONFIG, "Before running "
+ "zero copy vhost APP, please "
+ "disable RTE_MBUF_SCATTER_GATHER "
+ "in config file and then rebuild DPDK "
+ "core lib!\n"
+ "Otherwise please disable zero copy "
+ "flag in command line!\n");
+ return -1;
+#endif
+ }
+ }
+
+ /* Specify the descriptor number on RX. */
+ if (!strncmp(long_option[option_index].name,
+ "rx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for rx-desc-num[0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_rx_descriptor = ret;
+ }
+ }
+
+ /* Specify the descriptor number on TX. */
+ if (!strncmp(long_option[option_index].name,
+ "tx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for tx-desc-num [0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_tx_descriptor = ret;
+ }
+ }
+
+ break;
+
+ /* Invalid option - print options. */
+ default:
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (enabled_port_mask & (1 << i))
+ ports[num_ports++] = (uint8_t)i;
+ }
+
+ if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n", num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Vhost zero copy doesn't support software vm2vm, "
+ "please specify 'vm2vm 2' to use hardware vm2vm.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Update the global var NUM_PORTS and array PORTS according to system ports number
+ * and return valid ports number
+ */
+static unsigned check_ports_num(unsigned nb_ports)
+{
+ unsigned valid_num_ports = num_ports;
+ unsigned portid;
+
+ if (num_ports > nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
+ num_ports, nb_ports);
+ num_ports = nb_ports;
+ }
+
+ for (portid = 0; portid < num_ports; portid++) {
+ if (ports[portid] >= nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
+ ports[portid], (nb_ports - 1));
+ ports[portid] = INVALID_PORT_ID;
+ valid_num_ports--;
+ }
+ }
+ return valid_num_ports;
+}
+
+/*
+ * Macro to print out packet contents. Wrapped in debug define so that the
+ * data path is not effected when debug is disabled.
+ */
+#ifdef VHOST_DEBUG
+#define PRINT_PACKET(device, addr, size, header) do { \
+ char *pkt_addr = (char *)(addr); \
+ unsigned int index; \
+ char packet[MAX_PRINT_BUFF]; \
+ if ((header)) \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
+ else \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
+ for (index = 0; index < (size); index++) { \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
+ "%02hhx ", pkt_addr[index]); \
+ } \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
+ LOG_DEBUG(VHOST_DATA, "%s", packet); \
+} while (0)
+#else
+#define PRINT_PACKET(device, addr, size, header) do {} while (0)
+#endif
+
+/*
+ * Function to convert guest physical addresses to vhost physical addresses.
+ * This is used to convert virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_hpa(struct vhost_dev *vdev, uint64_t guest_pa,
+ uint32_t buf_len, enum hpa_type *addr_type)
+{
+ struct virtio_memory_regions_hpa *region;
+ uint32_t regionidx;
+ uint64_t vhost_pa = 0;
+
+ *addr_type = PHYS_ADDR_INVALID;
+
+ for (regionidx = 0; regionidx < vdev->nregions_hpa; regionidx++) {
+ region = &vdev->regions_hpa[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_pa = region->host_phys_addr_offset + guest_pa;
+ if (likely((guest_pa + buf_len - 1)
+ <= region->guest_phys_address_end))
+ *addr_type = PHYS_ADDR_CONTINUOUS;
+ else
+ *addr_type = PHYS_ADDR_CROSS_SUBREG;
+ break;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
+ dev->device_fh, (void *)(uintptr_t)guest_pa,
+ (void *)(uintptr_t)vhost_pa);
+
+ return vhost_pa;
+}
+
+/*
+ * Compares a packet destination MAC address to a device MAC address.
+ */
+static inline int __attribute__((always_inline))
+ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
+{
+ return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
+}
+
+/*
+ * This function learns the MAC address of the device and registers this along with a
+ * vlan tag to a VMDQ.
+ */
+static int
+link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m)
+{
+ struct ether_hdr *pkt_hdr;
+ struct virtio_net_data_ll *dev_ll;
+ struct virtio_net *dev = vdev->dev;
+ int i, ret;
+
+ /* Learn MAC address of guest device from packet */
+ pkt_hdr = (struct ether_hdr *)m->pkt.data;
+
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->vdev->mac_address)) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
+ return -1;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ vdev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
+
+ /* vlan_tag currently uses the device_id. */
+ vdev->vlan_tag = vlan_tags[dev->device_fh];
+
+ /* Print out VMDQ registration info. */
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
+ dev->device_fh,
+ vdev->mac_address.addr_bytes[0], vdev->mac_address.addr_bytes[1],
+ vdev->mac_address.addr_bytes[2], vdev->mac_address.addr_bytes[3],
+ vdev->mac_address.addr_bytes[4], vdev->mac_address.addr_bytes[5],
+ vdev->vlan_tag);
+
+ /* Register the MAC address on the pool specified by device_fh. */
+ ret = rte_eth_dev_mac_addr_add(ports[0], &vdev->mac_address, (uint32_t)dev->device_fh);
+ if (ret)
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
+ dev->device_fh);
+
+ /* Enable stripping of the vlan tag as we handle routing. */
+ rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)vdev->vmdq_rx_q, 1);
+
+ /* Set device as ready for RX. */
+ vdev->ready = DEVICE_RX;
+
+ return 0;
+}
+
+/*
+ * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
+ * queue before disabling RX on the device.
+ */
+static inline void
+unlink_vmdq(struct vhost_dev *vdev)
+{
+ unsigned i = 0;
+ unsigned rx_count;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+
+ if (vdev->ready == DEVICE_RX) {
+ /*clear MAC and VLAN settings*/
+ rte_eth_dev_mac_addr_remove(ports[0], &vdev->mac_address);
+ for (i = 0; i < 6; i++)
+ vdev->mac_address.addr_bytes[i] = 0;
+
+ vdev->vlan_tag = 0;
+
+ /*Clear out the receive buffers*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ /* TODO fixme */
+ while (rx_count) {
+ for (i = 0; i < rx_count; i++)
+ rte_pktmbuf_free(pkts_burst[i]);
+
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ }
+
+ vdev->ready = DEVICE_MAC_LEARNING;
+ }
+}
+
+/*
+ * Check if the packet destination MAC address is for a local device. If so then put
+ * the packet on that devices RX queue. If not then return.
+ */
+static inline int __attribute__((always_inline))
+virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
+{
+ struct virtio_net_data_ll *dev_ll;
+ struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
+ uint64_t ret = 0;
+ struct virtio_net *dev = vdev->dev;
+ struct virtio_net *tdev; /* destination virito device */
+
+ /* Get the used devices list*/
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if ((dev_ll->vdev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->vdev->mac_address)) {
+
+ /* Drop the packet if the TX packet is destined for the TX device. */
+ if (dev_ll->vdev->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
+ dev->device_fh);
+ return 0;
+ }
+ tdev = dev_ll->vdev->dev;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", tdev->device_fh);
+
+ if (unlikely(dev_ll->vdev->remove)) {
+ /* Drop the packet if the device is marked for removal*/
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh);
+ } else {
+ /* Send the packet to the local virtio device*/
+ ret = rte_vhost_enqueue_burst(tdev, VIRTIO_RXQ, &m, 1);
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[tdev->device_fh].rx_total_atomic,
+ 1);
+ rte_atomic64_add(
+ &dev_statistics[tdev->device_fh].rx_atomic,
+ ret);
+ dev_statistics[tdev->device_fh].tx_total++;
+ dev_statistics[tdev->device_fh].tx += ret;
+ }
+ }
+
+ return 0;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ return -1;
+}
+
+/*
+ * This function routes the TX packet to the correct interface. This may be a local device
+ * or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
+{
+ struct mbuf_table *tx_q;
+ struct rte_mbuf **m_table;
+ unsigned len, ret, offset = 0;
+ const uint16_t lcore_id = rte_lcore_id();
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
+ struct virtio_net *dev = vdev->dev;
+
+ /* Check if destination is local VM*/
+ if (vm2vm_mode == VM2VM_SOFTWARE && (virtio_tx_local(vdev, m) == 0)) {
+ rte_pktmbuf_free(m);
+ return;
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ while (dev_ll != NULL) {
+ if ((dev_ll->vdev->ready == DEVICE_RX)
+ && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->vdev->mac_address)) {
+ /*
+ * Drop the packet if the TX packet is
+ * destined for the TX device.
+ */
+ if (dev_ll->vdev->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ " MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->vdev->device_fh);
+ rte_pktmbuf_free(m);
+ return;
+ }
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->vdev->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->vdev->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
+
+ /*Add packet to the port tx queue*/
+ tx_q = &lcore_tx_queue[lcore_id];
+ len = tx_q->len;
+
+ m->ol_flags = PKT_TX_VLAN_PKT;
+ m->pkt.data_len += offset;
+ m->pkt.pkt_len = m->pkt.data_len;
+ m->pkt.vlan_macip.f.vlan_tci = vlan_tag;
+
+ tx_q->m_table[len] = m;
+ len++;
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+ /* Free any buffers not handled by TX and update the port stats. */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ }
+
+ tx_q->len = len;
+ return;
+}
+/*
+ * This function is called by each data core. It handles all RX/TX registered with the
+ * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
+ * with all devices in the main linked list.
+ */
+static int
+switch_worker(__attribute__((unused)) void *arg)
+{
+ struct rte_mempool *mbuf_pool = arg;
+ struct virtio_net *dev = NULL;
+ struct vhost_dev *vdev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret, i;
+ const uint16_t lcore_id = rte_lcore_id();
+ const uint16_t num_cores = (uint16_t)rte_lcore_count();
+ uint16_t rx_count = 0;
+ uint16_t tx_count;
+ uint32_t retry = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ tx_q = &lcore_tx_queue[lcore_id];
+ for (i = 0; i < num_cores; i++) {
+ if (lcore_ids[i] == lcore_id) {
+ tx_q->txq_id = i;
+ break;
+ }
+ }
+
+ while (1) {
+ cur_tsc = rte_rdtsc();
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u\n", tx_q->len);
+
+ /*Tx any packets in the queue*/
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+
+ tx_q->len = 0;
+ }
+
+ prev_tsc = cur_tsc;
+
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+ /*
+ * Inform the configuration core that we have exited the linked list and that no devices are
+ * in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /*
+ * Process devices
+ */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while (likely(dev_ll != NULL)) {
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
+
+ if (unlikely(vdev->remove)) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(vdev);
+ vdev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+ if (likely(vdev->ready == DEVICE_RX)) {
+ /*Handle guest RX*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+
+ if (rx_count) {
+ /*
+ * Retry is enabled and the queue is full then we wait and retry to avoid packet loss
+ * Here MAX_PKT_BURST must be less than virtio queue size
+ */
+ if (enable_retry && unlikely(rx_count > rte_vring_available_entries(dev, VIRTIO_RXQ))) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ if (rx_count <= rte_vring_available_entries(dev, VIRTIO_RXQ))
+ break;
+ }
+ }
+ ret_count = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_burst, rx_count);
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
+ rx_count);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_atomic, ret_count);
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ rte_pktmbuf_free_seg(pkts_burst[rx_count]);
+ }
+
+ }
+ }
+
+ if (!vdev->remove) {
+ /* Handle guest TX*/
+ tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
+ if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) {
+ while (tx_count--)
+ rte_pktmbuf_free(pkts_burst[tx_count]);
+ }
+ }
+ while (tx_count)
+ virtio_tx_route(vdev, pkts_burst[--tx_count], mbuf_pool, (uint16_t)dev->device_fh);
+ }
+
+ /*move to the next device in the list*/
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+
+
+
+
+/*
+ * This function gets available ring number for zero copy rx.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_num_zcp(struct virtio_net *dev)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ return (uint32_t)(avail_idx - vq->last_used_idx_res);
+}
+
+/*
+ * This function gets available ring index for zero copy rx,
+ * it will retry 'burst_rx_retry_num' times till it get enough ring index.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_index_zcp(struct virtio_net *dev,
+ uint16_t *res_base_idx, uint32_t count)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+ uint32_t retry = 0;
+ uint16_t free_entries;
+
+ *res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
+ "avail idx: %d, "
+ "res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx, *res_base_idx,
+ free_entries);
+
+ /*
+ * If retry is enabled and the queue is full then we wait
+ * and retry to avoid packet loss.
+ */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (unlikely(count == 0)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") Fail in get_available_ring_index_zcp: "
+ "avail idx: %d, res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx,
+ *res_base_idx, free_entries);
+ return 0;
+ }
+
+ vq->last_used_idx_res = *res_base_idx + count;
+
+ return count;
+}
+
+/*
+ * This function put descriptor back to used list.
+ */
+static inline void __attribute__((always_inline))
+put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
+{
+ uint16_t res_cur_idx = vq->last_used_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
+ rte_compiler_barrier();
+ *(volatile uint16_t *)&vq->used->idx += 1;
+ vq->last_used_idx += 1;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+/*
+ * This function get available descriptor from vitio vring and un-attached mbuf
+ * from vpool->ring, and then attach them together. It needs adjust the offset
+ * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
+ * frame data may be put to wrong location in mbuf.
+ */
+static inline void __attribute__((always_inline))
+attach_rxmbuf_zcp(struct virtio_net *dev)
+{
+ uint16_t res_base_idx, desc_idx;
+ uint64_t buff_addr, phys_addr;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *mbuf = NULL;
+ struct vpool *vpool;
+ enum hpa_type addr_type;
+ struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
+
+ vpool = &vpool_array[vdev->vmdq_rx_q];
+ vq = dev->virtqueue[VIRTIO_RXQ];
+
+ do {
+ if (unlikely(get_available_ring_index_zcp(vdev->dev, &res_base_idx,
+ 1) != 1))
+ return;
+ desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
+
+ desc = &vq->desc[desc_idx];
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc = &vq->desc[desc->next];
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len,
+ &addr_type);
+ } else {
+ buff_addr = gpa_to_vva(dev,
+ desc->addr + vq->vhost_hlen);
+ phys_addr = gpa_to_hpa(vdev,
+ desc->addr + vq->vhost_hlen,
+ desc->len, &addr_type);
+ }
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
+ " address found when attaching RX frame buffer"
+ " address!\n", dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching RX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+ } while (unlikely(phys_addr == 0));
+
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: "
+ "ring_sc_dequeue fail.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (unlikely(vpool->buf_size > desc->len)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
+ "length(%d) of descriptor idx: %d less than room "
+ "size required: %d\n",
+ dev->device_fh, desc->len, desc_idx, vpool->buf_size);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ return;
+ }
+
+ mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
+ mbuf->pkt.data = (void *)(uintptr_t)(buff_addr);
+ mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
+ mbuf->pkt.data_len = desc->len;
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
+ "descriptor idx:%d\n",
+ dev->device_fh, res_base_idx, desc_idx);
+
+ __rte_mbuf_raw_free(mbuf);
+
+ return;
+}
+
+/*
+ * Detach an attched packet mbuf -
+ * - restore original mbuf address and length values.
+ * - reset pktmbuf data and data_len to their default values.
+ * All other fields of the given packet mbuf will be left intact.
+ *
+ * @param m
+ * The attached packet mbuf.
+ */
+static inline void
+pktmbuf_detach_zcp(struct rte_mbuf *m)
+{
+ const struct rte_mempool *mp = m->pool;
+ void *buf = RTE_MBUF_TO_BADDR(m);
+ uint32_t buf_ofs;
+ uint32_t buf_len = mp->elt_size - sizeof(*m);
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
+
+ m->buf_addr = buf;
+ m->buf_len = (uint16_t)buf_len;
+
+ buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
+ RTE_PKTMBUF_HEADROOM : m->buf_len;
+ m->pkt.data = (char *) m->buf_addr + buf_ofs;
+
+ m->pkt.data_len = 0;
+}
+
+/*
+ * This function is called after packets have been transimited. It fetchs mbuf
+ * from vpool->pool, detached it and put into vpool->ring. It also update the
+ * used index and kick the guest if necessary.
+ */
+static inline uint32_t __attribute__((always_inline))
+txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf;
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
+ uint32_t index = 0;
+ uint32_t mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
+ "clean is: %d\n",
+ dev->device_fh, mbuf_count);
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, mbuf);
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
+ vq->used->ring[used_idx].len = 0;
+
+ used_idx = (used_idx + 1) & (vq->size - 1);
+ }
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
+ "clean is: %d\n",
+ dev->device_fh, rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: before updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ vq->last_used_idx += mbuf_count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: after updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ rte_compiler_barrier();
+
+ *(volatile uint16_t *)&vq->used->idx += mbuf_count;
+
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return 0;
+}
+
+/*
+ * This function is called when a virtio device is destroy.
+ * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
+ */
+static void
+mbuf_destroy_zcp(struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf = NULL;
+ uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool before "
+ "mbuf_destroy_zcp is: %d\n",
+ mbuf_count);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring before "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(mbuf != NULL)) {
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ }
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool after "
+ "mbuf_destroy_zcp is: %d\n",
+ rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring after "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+}
+
+/*
+ * This function update the use flag and counter.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr
+ = {{0, 0, 0, 0, 0, 0}, 0};
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint16_t res_cur_idx;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+
+ if (count == 0)
+ return 0;
+
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ res_cur_idx = vq->last_used_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
+ dev->device_fh, res_cur_idx, res_cur_idx + count);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (packet_success != count) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: update the used idx for "
+ "pkt[%d] descriptor idx: %d\n",
+ dev->device_fh, packet_success,
+ MBUF_HEADROOM_UINT32(buff));
+
+ PRINT_PACKET(dev,
+ (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
+ + RTE_PKTMBUF_HEADROOM),
+ rte_pktmbuf_data_len(buff), 0);
+
+ /* Buffer address translation for virtio header. */
+ /* Could we buffer the translation for data in mbuf headroom */
+ buff_hdr_addr = gpa_to_vva(dev, desc->addr);
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id
+ = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len
+ = packet_len;
+ res_cur_idx++;
+ packet_success++;
+
+ /* A header is required per buffer. */
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (likely(packet_success < count)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: before update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx += count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: after update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return count;
+}
+
+/*
+ * This function routes the TX packet to the correct interface.
+ * This may be a local device or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
+ uint32_t desc_idx, uint8_t need_copy)
+{
+ struct mbuf_table *tx_q;
+ struct rte_mbuf **m_table;
+ struct rte_mbuf *mbuf = NULL;
+ unsigned len, ret, offset = 0;
+ struct vpool *vpool;
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = (struct ether_hdr *)m->pkt.data;
+ uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
+ uint16_t vmdq_rx_q = ((struct vhost_dev *)dev->priv)->vmdq_rx_q;
+
+ /*Add packet to the port tx queue*/
+ tx_q = &tx_queue_zcp[vmdq_rx_q];
+ len = tx_q->len;
+
+ /* Allocate an mbuf and populate the structure. */
+ vpool = &vpool_array[MAX_QUEUES + vmdq_rx_q];
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Failed to allocate memory for mbuf.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Avoid using a vlan tag from any vm for external pkt, such as
+ * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
+ * selection, MAC address determines it as an external pkt
+ * which should go to network, while vlan tag determine it as
+ * a vm2vm pkt should forward to another vm. Hardware confuse
+ * such a ambiguous situation, so pkt will lost.
+ */
+ vlan_tag = external_pkt_default_vlan_tag;
+ while (dev_ll != NULL) {
+ if (likely(dev_ll->vdev->ready == DEVICE_RX) &&
+ ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->vdev->mac_address)) {
+
+ /*
+ * Drop the packet if the TX packet is destined
+ * for the TX device.
+ */
+ if (unlikely(dev_ll->vdev->dev->device_fh
+ == dev->device_fh)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ "MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->dev->device_fh);
+ MBUF_HEADROOM_UINT32(mbuf)
+ = (uint32_t)desc_idx;
+ __rte_mbuf_raw_free(mbuf);
+ return;
+ }
+
+ /*
+ * Packet length offset 4 bytes for HW vlan
+ * strip when L2 switch back.
+ */
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->vdev->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ mbuf->pkt.nb_segs = m->pkt.nb_segs;
+ mbuf->pkt.next = m->pkt.next;
+ mbuf->pkt.data_len = m->pkt.data_len + offset;
+ mbuf->pkt.pkt_len = mbuf->pkt.data_len;
+ if (unlikely(need_copy)) {
+ /* Copy the packet contents to the mbuf. */
+ rte_memcpy((void *)((uint8_t *)mbuf->pkt.data),
+ (const void *) ((uint8_t *)m->pkt.data),
+ m->pkt.data_len);
+ } else {
+ mbuf->pkt.data = m->pkt.data;
+ mbuf->buf_physaddr = m->buf_physaddr;
+ mbuf->buf_addr = m->buf_addr;
+ }
+ mbuf->ol_flags = PKT_TX_VLAN_PKT;
+ mbuf->pkt.vlan_macip.f.vlan_tci = vlan_tag;
+ mbuf->pkt.vlan_macip.f.l2_len = sizeof(struct ether_hdr);
+ mbuf->pkt.vlan_macip.f.l3_len = sizeof(struct ipv4_hdr);
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ tx_q->m_table[len] = mbuf;
+ len++;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
+ dev->device_fh,
+ mbuf->pkt.nb_segs,
+ (mbuf->pkt.next == NULL) ? "null" : "non-null");
+
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0],
+ (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+
+ /*
+ * Free any buffers not handled by TX and update
+ * the port stats.
+ */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ txmbuf_clean_zcp(dev, vpool);
+ }
+
+ tx_q->len = len;
+
+ return;
+}
+
+/*
+ * This function TX all available packets in virtio TX queue for one
+ * virtio-net device. If it is first packet, it learns MAC address and
+ * setup VMDQ.
+ */
+static inline void __attribute__((always_inline))
+virtio_dev_tx_zcp(struct virtio_net *dev)
+{
+ struct rte_mbuf m;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0, phys_addr;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+ uint8_t need_copy = 0;
+ enum hpa_type addr_type;
+ struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx_res == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
+
+ /* Get the number of free entries in the ring */
+ free_entries = (avail_idx - vq->last_used_idx_res);
+
+ /* Limit to MAX_PKT_BURST. */
+ free_entries
+ = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i]
+ = vq->avail->ring[(vq->last_used_idx_res + i)
+ & (vq->size - 1)];
+
+ vq->last_used_idx_res += free_entries;
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len, &addr_type);
+
+ if (likely(packet_success < (free_entries - 1)))
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success + 1]]);
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Invalid frame buffer address found"
+ "when TX packets!\n",
+ dev->device_fh);
+ packet_success++;
+ continue;
+ }
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)buff_addr);
+
+ /*
+ * Setup dummy mbuf. This is copied to a real mbuf if
+ * transmitted out the physical port.
+ */
+ m.pkt.data_len = desc->len;
+ m.pkt.nb_segs = 1;
+ m.pkt.next = NULL;
+ m.pkt.data = (void *)(uintptr_t)buff_addr;
+ m.buf_addr = m.pkt.data;
+ m.buf_physaddr = phys_addr;
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching TX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ need_copy = 1;
+ } else
+ need_copy = 0;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /*
+ * If this is the first received packet we need to learn
+ * the MAC and setup VMDQ
+ */
+ if (unlikely(vdev->ready == DEVICE_MAC_LEARNING)) {
+ if (vdev->remove || (link_vmdq(vdev, &m) == -1)) {
+ /*
+ * Discard frame if device is scheduled for
+ * removal or a duplicate MAC address is found.
+ */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+
+ virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
+ packet_success++;
+ }
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered
+ * with the core. For TX the specific lcore linked list is used. For RX, MAC
+ * addresses are compared with all devices in the main linked list.
+ */
+static int
+switch_worker_zcp(__attribute__((unused)) void *arg)
+{
+ struct virtio_net *dev = NULL;
+ struct vhost_dev *vdev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc
+ = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
+ * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret;
+ const uint16_t lcore_id = rte_lcore_id();
+ uint16_t count_in_ring, rx_count = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ while (1) {
+ cur_tsc = rte_rdtsc();
+
+ /* TX burst queue drain */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+ /*
+ * Get mbuf from vpool.pool and detach mbuf and
+ * put back into vpool.ring.
+ */
+ dev_ll = lcore_ll->ll_root_used;
+ while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
+ /* Get virtio device ID */
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
+
+ if (likely(!vdev->remove)) {
+ tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q];
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA,
+ "TX queue drained after timeout"
+ " with burst size %u\n",
+ tx_q->len);
+
+ /*
+ * Tx any packets in the queue
+ */
+ ret = rte_eth_tx_burst(
+ ports[0],
+ (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)
+ tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(
+ tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+ tx_q->len = 0;
+
+ txmbuf_clean_zcp(dev,
+ &vpool_array[MAX_QUEUES + vdev->vmdq_rx_q]);
+ }
+ }
+ dev_ll = dev_ll->next;
+ }
+ prev_tsc = cur_tsc;
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+
+ /*
+ * Inform the configuration core that we have exited the linked
+ * list and that no devices are in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /* Process devices */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
+ if (unlikely(vdev->remove)) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(vdev);
+ vdev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+
+ if (likely(vdev->ready == DEVICE_RX)) {
+ uint32_t index = vdev->vmdq_rx_q;
+ uint16_t i;
+ count_in_ring
+ = rte_ring_count(vpool_array[index].ring);
+ uint16_t free_entries
+ = (uint16_t)get_available_ring_num_zcp(dev);
+
+ /*
+ * Attach all mbufs in vpool.ring and put back
+ * into vpool.pool.
+ */
+ for (i = 0;
+ i < RTE_MIN(free_entries,
+ RTE_MIN(count_in_ring, MAX_PKT_BURST));
+ i++)
+ attach_rxmbuf_zcp(dev);
+
+ /* Handle guest RX */
+ rx_count = rte_eth_rx_burst(ports[0],
+ vdev->vmdq_rx_q, pkts_burst,
+ MAX_PKT_BURST);
+
+ if (rx_count) {
+ ret_count = virtio_dev_rx_zcp(dev,
+ pkts_burst, rx_count);
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].rx_total
+ += rx_count;
+ dev_statistics[dev->device_fh].rx
+ += ret_count;
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ pktmbuf_detach_zcp(
+ pkts_burst[rx_count]);
+ rte_ring_sp_enqueue(
+ vpool_array[index].ring,
+ (void *)pkts_burst[rx_count]);
+ }
+ }
+ }
+
+ if (likely(!vdev->remove))
+ /* Handle guest TX */
+ virtio_dev_tx_zcp(dev);
+
+ /* Move to the next device in the list */
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+
+/*
+ * Add an entry to a used linked list. A free entry must first be found
+ * in the free linked list using get_data_ll_free_entry();
+ */
+static void
+add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ /* Set next as NULL and use a compiler barrier to avoid reordering. */
+ ll_dev->next = NULL;
+ rte_compiler_barrier();
+
+ /* If ll == NULL then this is the first device. */
+ if (ll) {
+ /* Increment to the tail of the linked list. */
+ while ((ll->next != NULL))
+ ll = ll->next;
+
+ ll->next = ll_dev;
+ } else {
+ *ll_root_addr = ll_dev;
+ }
+}
+
+/*
+ * Remove an entry from a used linked list. The entry must then be added to
+ * the free linked list using put_data_ll_free_entry().
+ */
+static void
+rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev,
+ struct virtio_net_data_ll *ll_dev_last)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ if (unlikely((ll == NULL) || (ll_dev == NULL)))
+ return;
+
+ if (ll_dev == ll)
+ *ll_root_addr = ll_dev->next;
+ else
+ if (likely(ll_dev_last != NULL))
+ ll_dev_last->next = ll_dev->next;
+ else
+ RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
+}
+
+/*
+ * Find and return an entry from the free linked list.
+ */
+static struct virtio_net_data_ll *
+get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+ struct virtio_net_data_ll *ll_dev;
+
+ if (ll_free == NULL)
+ return NULL;
+
+ ll_dev = ll_free;
+ *ll_root_addr = ll_free->next;
+
+ return ll_dev;
+}
+
+/*
+ * Place an entry back on to the free linked list.
+ */
+static void
+put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+
+ if (ll_dev == NULL)
+ return;
+
+ ll_dev->next = ll_free;
+ *ll_root_addr = ll_dev;
+}
+
+/*
+ * Creates a linked list of a given size.
+ */
+static struct virtio_net_data_ll *
+alloc_data_ll(uint32_t size)
+{
+ struct virtio_net_data_ll *ll_new;
+ uint32_t i;
+
+ /* Malloc and then chain the linked list. */
+ ll_new = rte_zmalloc("vhost ll", size * sizeof(struct virtio_net_data_ll), 0);
+ if (ll_new == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
+ return NULL;
+ }
+
+ for (i = 0; i < size - 1; i++) {
+ ll_new[i].vdev = NULL;
+ ll_new[i].next = &ll_new[i+1];
+ }
+ ll_new[i].next = NULL;
+
+ return ll_new;
+}
+
+/*
+ * Create the main linked list along with each individual cores linked list. A used and a free list
+ * are created to manage entries.
+ */
+static int
+init_data_ll(void)
+{
+ int lcore;
+
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll = rte_zmalloc("vhost lcore_ll_info", sizeof(struct lcore_ll_info), 0);
+ if (lcore_info[lcore].lcore_ll == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
+ return -1;
+ }
+
+ lcore_info[lcore].lcore_ll->device_num = 0;
+ lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+ lcore_info[lcore].lcore_ll->ll_root_used = NULL;
+ if (num_devices % num_switching_cores)
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
+ else
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
+ }
+
+ /* Allocate devices up to a maximum of MAX_DEVICES. */
+ ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
+
+ return 0;
+}
+
+/*
+ * Remove a device from the specific data core linked list and from the main linked list. Synchonization
+ * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
+ * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
+ */
+static void
+destroy_device(struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_lcore_dev_cur;
+ struct virtio_net_data_ll *ll_main_dev_cur;
+ struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
+ struct virtio_net_data_ll *ll_main_dev_last = NULL;
+ struct vhost_dev *vdev;
+ int lcore;
+
+ dev->flags &= ~VIRTIO_DEV_RUNNING;
+
+ vdev = (struct vhost_dev *)dev->priv;
+ /* Set the remove flag. */
+ vdev->remove = 1;
+ while (vdev->ready != DEVICE_SAFE_REMOVE)
+ rte_pause();
+
+ /* Search for entry to be removed from lcore ll */
+ ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used;
+ while (ll_lcore_dev_cur != NULL) {
+ if (ll_lcore_dev_cur->vdev == vdev) {
+ break;
+ } else {
+ ll_lcore_dev_last = ll_lcore_dev_cur;
+ ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+ }
+ }
+
+ if (ll_lcore_dev_cur == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find the dev to be destroy.\n",
+ dev->device_fh);
+ return;
+ }
+
+ /* Search for entry to be removed from main ll */
+ ll_main_dev_cur = ll_root_used;
+ ll_main_dev_last = NULL;
+ while (ll_main_dev_cur != NULL) {
+ if (ll_main_dev_cur->vdev == vdev) {
+ break;
+ } else {
+ ll_main_dev_last = ll_main_dev_cur;
+ ll_main_dev_cur = ll_main_dev_cur->next;
+ }
+ }
+
+ /* Remove entries from the lcore and main ll. */
+ rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+ rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+
+ /* Set the dev_removal_flag on each lcore. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
+ }
+
+ /*
+ * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
+ * they can no longer access the device removed from the linked lists and that the devices
+ * are no longer in use.
+ */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL)
+ rte_pause();
+ }
+
+ /* Add the entries back to the lcore and main free ll.*/
+ put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+ put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+
+ /* Decrement number of device on the lcore. */
+ lcore_info[vdev->coreid].lcore_ll->device_num--;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
+
+ if (zero_copy) {
+ struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q];
+
+ /* Stop the RX queue. */
+ if (rte_eth_dev_rx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to stop "
+ "rx queue:%d\n",
+ dev->device_fh,
+ dev->vmdq_rx_q);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in destroy_device: Start put mbuf in "
+ "mempool back to ring for RX queue: %d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+ }
+
+ vpool = &vpool_array[vdev->vmdq_rx_q + MAX_QUEUES];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") destroy_device: Start put mbuf in mempool "
+ "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
+ dev->device_fh, (vdev->vmdq_rx_q + MAX_QUEUES),
+ dev->device_fh);
+
+ mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
+ }
+ rte_free(vdev);
+
+}
+
+/*
+ * Calculate the region count of physical continous regions for one particular
+ * region of whose vhost virtual address is continous. The particular region
+ * start from vva_start, with size of 'size' in argument.
+ */
+static uint32_t
+check_hpa_regions(uint64_t vva_start, uint64_t size)
+{
+ uint32_t i, nregions = 0, page_size = getpagesize();
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0;
+ if (vva_start % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: vva start(%p) mod page_size(%d) "
+ "has remainder\n",
+ (void *)(uintptr_t)vva_start, page_size);
+ return 0;
+ }
+ if (size % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: "
+ "size((%"PRIu64")) mod page_size(%d) has remainder\n",
+ size, page_size);
+ return 0;
+ }
+ for (i = 0; i < size - page_size; i = i + page_size) {
+ cur_phys_addr
+ = rte_mem_virt2phy((void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ ++nregions;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hva addr:(%p) is not "
+ "continuous with hva addr:(%p), diff:%d\n",
+ (void *)(uintptr_t)(vva_start + (uint64_t)i),
+ (void *)(uintptr_t)(vva_start + (uint64_t)i
+ + page_size), page_size);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hpa addr:(%p) is not "
+ "continuous with hpa addr:(%p), "
+ "diff:(%"PRIu64")\n",
+ (void *)(uintptr_t)cur_phys_addr,
+ (void *)(uintptr_t)next_phys_addr,
+ (next_phys_addr-cur_phys_addr));
+ }
+ }
+ return nregions;
+}
+
+/*
+ * Divide each region whose vhost virtual address is continous into a few
+ * sub-regions, make sure the physical address within each sub-region are
+ * continous. And fill offset(to GPA) and size etc. information of each
+ * sub-region into regions_hpa.
+ */
+static uint32_t
+fill_hpa_memory_regions(struct virtio_memory_regions_hpa *mem_region_hpa, struct virtio_memory *virtio_memory)
+{
+ uint32_t regionidx, regionidx_hpa = 0, i, k, page_size = getpagesize();
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0, vva_start;
+
+ if (mem_region_hpa == NULL)
+ return 0;
+
+ for (regionidx = 0; regionidx < virtio_memory->nregions; regionidx++) {
+ vva_start = virtio_memory->regions[regionidx].guest_phys_address +
+ virtio_memory->regions[regionidx].address_offset;
+ mem_region_hpa[regionidx_hpa].guest_phys_address
+ = virtio_memory->regions[regionidx].guest_phys_address;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ rte_mem_virt2phy((void *)(uintptr_t)(vva_start)) -
+ mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ for (i = 0, k = 0;
+ i < virtio_memory->regions[regionidx].memory_size -
+ page_size;
+ i += page_size) {
+ cur_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start +
+ i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end =
+ mem_region_hpa[regionidx_hpa].guest_phys_address +
+ k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size
+ = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest "
+ "phys addr end [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr "
+ "size [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ mem_region_hpa[regionidx_hpa + 1].guest_phys_address
+ = mem_region_hpa[regionidx_hpa].guest_phys_address_end;
+ ++regionidx_hpa;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ next_phys_addr -
+ mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest"
+ " phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr "
+ "start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ k = 0;
+ } else {
+ k += page_size;
+ }
+ }
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end
+ = mem_region_hpa[regionidx_hpa].guest_phys_address
+ + k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr end "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr size "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ ++regionidx_hpa;
+ }
+ return regionidx_hpa;
+}
+
+/*
+ * A new device is added to a data core. First the device is added to the main linked list
+ * and then allocated to a specific data core.
+ */
+static int
+new_device(struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_dev;
+ int lcore, core_add = 0;
+ uint32_t device_num_min = num_devices;
+ struct vhost_dev *vdev;
+ uint32_t regionidx;
+
+ vdev = rte_zmalloc("vhost device", sizeof(*vdev), CACHE_LINE_SIZE);
+ if (vdev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Couldn't allocate memory for vhost dev\n",
+ dev->device_fh);
+ return -1;
+ }
+ vdev->dev = dev;
+ dev->priv = vdev;
+
+ if (zero_copy) {
+ vdev->nregions_hpa = dev->mem->nregions;
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ vdev->nregions_hpa
+ += check_hpa_regions(
+ dev->mem->regions[regionidx].guest_phys_address
+ + dev->mem->regions[regionidx].address_offset,
+ dev->mem->regions[regionidx].memory_size);
+
+ }
+
+ vdev->regions_hpa = (struct virtio_memory_regions_hpa *) rte_zmalloc("vhost hpa region",
+ sizeof(struct virtio_memory_regions_hpa) * vdev->nregions_hpa,
+ CACHE_LINE_SIZE);
+ if (vdev->regions_hpa == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Cannot allocate memory for hpa region\n");
+ rte_free(vdev);
+ return -1;
+ }
+
+
+ if (fill_hpa_memory_regions(
+ vdev->regions_hpa, dev->mem
+ ) != vdev->nregions_hpa) {
+
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "hpa memory regions number mismatch: "
+ "[%d]\n", vdev->nregions_hpa);
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ }
+
+
+ /* Add device to main linked list */
+ ll_dev = get_data_ll_free_entry(&ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
+ "of %d devices per core has been reached\n",
+ dev->device_fh, num_devices);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ ll_dev->vdev = vdev;
+ add_data_ll_entry(&ll_root_used, ll_dev);
+
+ /* Allocate the vmdq receive queue for this virtio device */
+ vdev->vmdq_rx_q = dev->device_fh * (num_queues / num_devices);
+
+ if (zero_copy) {
+ uint16_t vmdq_rx_q = vdev->vmdq_rx_q;
+ uint32_t count_in_ring, i;
+ struct mbuf_table *tx_q;
+
+ count_in_ring = rte_ring_count(vpool_array[vmdq_rx_q].ring);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in mempool "
+ "before attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[vmdq_rx_q].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in ring "
+ "before attach is : %d\n",
+ dev->device_fh, count_in_ring);
+
+
+ /*
+ * Attach all mbufs in vpool.ring and put back into vpool.pool.
+ */
+ for (i = 0; i < count_in_ring; i++)
+ attach_rxmbuf_zcp(dev);
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "mempool after attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[vmdq_rx_q].pool));
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "ring after attach is : %d\n",
+ dev->device_fh,
+ rte_ring_count(vpool_array[vmdq_rx_q].ring));
+
+ tx_q = &tx_queue_zcp[vmdq_rx_q];
+ tx_q->txq_id = vmdq_rx_q;
+
+ if (rte_eth_dev_tx_queue_start(ports[0], vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "tx queue:%d\n",
+ dev->device_fh, vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+
+ if (rte_eth_dev_rx_queue_start(ports[0], vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "rx queue:%d\n",
+ dev->device_fh, vmdq_rx_q);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0],
+ vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, vmdq_rx_q);
+ }
+
+ mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ }
+
+ /* Reset ready flag*/
+ vdev->ready = DEVICE_MAC_LEARNING;
+ vdev->remove = 0;
+
+ /* Find a suitable lcore to add the device. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+ device_num_min = lcore_info[lcore].lcore_ll->device_num;
+ core_add = lcore;
+ }
+ }
+ /* Add device to per core linked list */
+ ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
+ vdev->ready = DEVICE_SAFE_REMOVE;
+ destroy_device(dev);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ ll_dev->vdev = vdev;
+ vdev->coreid = core_add;
+
+
+
+ add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_dev);
+
+ /* Initialize device stats */
+ memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
+
+ /* Disable notifications. */
+ rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0);
+ rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0);
+ lcore_info[vdev->coreid].lcore_ll->device_num++;
+ dev->flags |= VIRTIO_DEV_RUNNING;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, vdev->coreid);
+
+ return 0;
+}
+
+/*
+ * These callback allow devices to be added to the data core when configuration
+ * has been fully complete.
+ */
+static const struct virtio_net_device_ops virtio_net_device_ops = {
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+};
+
+/*
+ * This is a thread will wake up after a period to print stats if the user has
+ * enabled them.
+ */
+static void
+print_stats(void)
+{
+ struct virtio_net_data_ll *dev_ll;
+ uint64_t tx_dropped, rx_dropped;
+ uint64_t tx, tx_total, rx, rx_total;
+ uint32_t device_fh;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
+
+ while (1) {
+ sleep(enable_stats);
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nDevice statistics ====================================");
+
+ dev_ll = ll_root_used;
+ while (dev_ll != NULL) {
+ device_fh = (uint32_t)dev_ll->vdev->dev->device_fh;
+ tx_total = dev_statistics[device_fh].tx_total;
+ tx = dev_statistics[device_fh].tx;
+ tx_dropped = tx_total - tx;
+ if (zero_copy == 0) {
+ rx_total = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_total_atomic);
+ rx = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_atomic);
+ } else {
+ rx_total = dev_statistics[device_fh].rx_total;
+ rx = dev_statistics[device_fh].rx;
+ }
+ rx_dropped = rx_total - rx;
+
+ printf("\nStatistics for device %"PRIu32" ------------------------------\n"
+ "TX total: %"PRIu64"\n"
+ "TX dropped: %"PRIu64"\n"
+ "TX successful: %"PRIu64"\n"
+ "RX total: %"PRIu64"\n"
+ "RX dropped: %"PRIu64"\n"
+ "RX successful: %"PRIu64"",
+ device_fh,
+ tx_total,
+ tx_dropped,
+ tx,
+ rx_total,
+ rx_dropped,
+ rx);
+
+ dev_ll = dev_ll->next;
+ }
+ printf("\n======================================================\n");
+ }
+}
+
+static void
+setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
+ char *ring_name, uint32_t nb_mbuf)
+{
+ uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
+ vpool_array[index].pool
+ = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
+ MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
+ rte_pktmbuf_init, NULL, socket, 0);
+ if (vpool_array[index].pool != NULL) {
+ vpool_array[index].ring
+ = rte_ring_create(ring_name,
+ rte_align32pow2(nb_mbuf + 1),
+ socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
+ if (likely(vpool_array[index].ring != NULL)) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "mempool is: %d\n",
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "ring is: %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ } else {
+ rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
+ ring_name);
+ }
+
+ /* Need consider head room. */
+ vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
+ } else {
+ rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
+ }
+}
+
+
+/*
+ * Main function, does initialisation and calls the per-lcore functions. The CUSE
+ * device is also registered here to handle the IOCTLs.
+ */
+int
+MAIN(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool = NULL;
+ unsigned lcore_id, core_id = 0;
+ unsigned nb_ports, valid_num_ports;
+ int ret;
+ uint8_t portid, queue_id = 0;
+ static pthread_t tid;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse app arguments */
+ ret = us_vhost_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+ if (rte_eal_pci_probe() != 0)
+ rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id++)
+ if (rte_lcore_is_enabled(lcore_id))
+ lcore_ids[core_id++] = lcore_id;
+
+ if (rte_lcore_count() > RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE, "Not enough cores\n");
+
+ /*set the number of swithcing cores available*/
+ num_switching_cores = rte_lcore_count()-1;
+
+ /* Get the number of physical ports. */
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /*
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
+ valid_num_ports = check_ports_num(nb_ports);
+
+ if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n", num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if (zero_copy == 0) {
+ /* Create the mbuf pool. */
+ mbuf_pool = rte_mempool_create(
+ "MBUF_POOL",
+ NUM_MBUFS_PER_PORT
+ * valid_num_ports,
+ MBUF_SIZE, MBUF_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
+ vpool_array[queue_id].pool = mbuf_pool;
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ } else {
+ uint32_t nb_mbuf;
+ char pool_name[RTE_MEMPOOL_NAMESIZE];
+ char ring_name[RTE_MEMPOOL_NAMESIZE];
+
+ rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
+ rx_conf_default.rx_drop_en = 0;
+ tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
+ nb_mbuf = num_rx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "rxmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "rxmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(), queue_id,
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ nb_mbuf = num_tx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "txmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "txmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(),
+ (queue_id + MAX_QUEUES),
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ }
+ /* Set log level. */
+ rte_set_log_level(LOG_LEVEL);
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Skipping disabled port %d\n", portid);
+ continue;
+ }
+ if (port_init(portid) != 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot initialize network ports\n");
+ }
+
+ /* Initialise all linked lists. */
+ if (init_data_ll() == -1)
+ rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
+
+ /* Initialize device stats */
+ memset(&dev_statistics, 0, sizeof(dev_statistics));
+
+ /* Enable stats if the user option is set. */
+ if (enable_stats)
+ pthread_create(&tid, NULL, (void *)print_stats, NULL);
+
+ /* Launch all data cores. */
+ if (zero_copy == 0) {
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(switch_worker,
+ mbuf_pool, lcore_id);
+ }
+ } else {
+ uint32_t count_in_mempool, index, i;
+ for (index = 0; index < 2 * MAX_QUEUES; index++) {
+ /* For all RX and TX queues. */
+ count_in_mempool
+ = rte_mempool_count(vpool_array[index].pool);
+
+ /*
+ * Transfer all un-attached mbufs from vpool.pool
+ * to vpoo.ring.
+ */
+ for (i = 0; i < count_in_mempool; i++) {
+ struct rte_mbuf *mbuf
+ = __rte_mbuf_raw_alloc(
+ vpool_array[index].pool);
+ rte_ring_sp_enqueue(vpool_array[index].ring,
+ (void *)mbuf);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in mempool at initial "
+ "is: %d\n", count_in_mempool);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in ring at initial is :"
+ " %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ }
+
+ RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ rte_eal_remote_launch(switch_worker_zcp, NULL,
+ lcore_id);
+ }
+
+ if (mergeable == 0)
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
+
+ /* Register CUSE device to handle IOCTLs. */
+ ret = rte_vhost_driver_register((char *)&dev_basename);
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE, "CUSE device setup failure.\n");
+
+ rte_vhost_driver_callback_register(&virtio_net_device_ops);
+
+ /* Start CUSE session. */
+ rte_vhost_driver_session_start();
+
+ return 0;
+
+}
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
new file mode 100644
index 0000000..866ba3a
--- /dev/null
+++ b/examples/vhost/main.h
@@ -0,0 +1,109 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+/**
+ * Information relating to memory regions including offsets to
+ * addresses in host physical space.
+ */
+struct virtio_memory_regions_hpa {
+ /**< Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /**< End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /**< Size of region. */
+ uint64_t memory_size;
+ /**< Offset of region for gpa to hpa translation. */
+ uint64_t host_phys_addr_offset;
+};
+
+/**
+ * Device linked list structure for data path.
+ */
+struct vhost_dev {
+ /**< Pointer to device created by vhost lib. */
+ struct virtio_net *dev;
+ /**< Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /**< Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /**< Device MAC address (Obtained on first TX packet). */
+ struct ether_addr mac_address;
+ /**< RX VMDQ queue number. */
+ uint16_t vmdq_rx_q;
+ /**< Vlan tag assigned to the pool */
+ uint32_t vlan_tag;
+ /**< Data core that the device is added to. */
+ uint16_t coreid;
+ /**< A device is set as ready if the MAC address has been set. */
+ volatile uint8_t ready;
+ /**< Device is marked for removal from the data core. */
+ volatile uint8_t remove;
+} __rte_cache_aligned;
+
+struct virtio_net_data_ll {
+ /* Pointer to device created by configuration core. */
+ struct vhost_dev *vdev;
+ /* Pointer to next device in linked list. */
+ struct virtio_net_data_ll *next;
+};
+
+/**
+ * Structure containing data core specific information.
+ */
+struct lcore_ll_info {
+ /**< Pointer to head in free linked list. */
+ struct virtio_net_data_ll *ll_root_free;
+ /**< Pointer to head of used linked list. */
+ struct virtio_net_data_ll *ll_root_used;
+ /**< Number of devices on lcore. */
+ uint32_t device_num;
+ /**< Flag to synchronize device removal. */
+ volatile uint8_t dev_removal_flag;
+};
+
+struct lcore_info {
+ /* Pointer to data core specific lcore_ll_info struct */
+ struct lcore_ll_info *lcore_ll;
+};
+
+int MAIN(int argc, char **argv);
+#endif /* _MAIN_H_ */
--
1.8.1.4
next prev parent reply other threads:[~2014-08-05 15:57 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-05 15:58 [dpdk-dev] [PATCH 0/3] vhost example based on user space vhost library Huawei Xie
2014-08-05 15:58 ` [dpdk-dev] [PATCH 1/3] examples/vhost: remove old vhost example Huawei Xie
2014-08-05 15:58 ` [dpdk-dev] [PATCH 2/3] lib/librte_vhost: add lib/librte_vhost support in mk/rte.app.mk Huawei Xie
2014-08-05 15:58 ` Huawei Xie [this message]
2014-08-06 3:32 ` [dpdk-dev] [PATCH 3/3] examples/vhost: add new vhost example Stephen Hemminger
2014-08-06 5:34 ` Xie, Huawei
2014-08-06 3:09 ` [dpdk-dev] [PATCH 0/3] vhost example based on user space vhost library Fu, JingguoX
2014-08-07 14:29 ` Cao, Waterman
2014-08-19 8:50 ` Tahhan, Maryam
2014-08-19 9:06 ` Xie, Huawei
2014-08-19 12:35 ` Tahhan, Maryam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407254286-23972-4-git-send-email-huawei.xie@intel.com \
--to=huawei.xie@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).