From: Bruce Richardson <bruce.richardson@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [RFC PATCH 14/14] ixgbe: Allow vector RX of scattered packets
Date: Mon, 11 Aug 2014 21:44:50 +0100 [thread overview]
Message-ID: <1407789890-17355-15-git-send-email-bruce.richardson@intel.com> (raw)
In-Reply-To: <1407789890-17355-1-git-send-email-bruce.richardson@intel.com>
Provide a wrapper routine to enable receive of scattered packets with a
vector driver.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 8 +-
lib/librte_pmd_ixgbe/ixgbe_rxtx.h | 1 +
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 164 ++++++++++++++++++++++++++++++++--
3 files changed, 160 insertions(+), 13 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index cca44b8..95c736d 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -3504,12 +3504,12 @@ ixgbe_dev_rx_init(struct rte_eth_dev *dev)
if ((dev->data->dev_conf.rxmode.max_rx_pkt_len +
2 * IXGBE_VLAN_TAG_SIZE) > buf_size){
dev->data->scattered_rx = 1;
- dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
}
}
if (dev->data->dev_conf.rxmode.enable_scatter) {
- dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
dev->data->scattered_rx = 1;
}
@@ -3997,12 +3997,12 @@ ixgbevf_dev_rx_init(struct rte_eth_dev *dev)
if ((dev->data->dev_conf.rxmode.max_rx_pkt_len +
2 * IXGBE_VLAN_TAG_SIZE) > buf_size) {
dev->data->scattered_rx = 1;
- dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
}
}
if (dev->data->dev_conf.rxmode.enable_scatter) {
- dev->rx_pkt_burst = ixgbe_recv_scattered_pkts;
+ dev->rx_pkt_burst = ixgbe_recv_scattered_pkts_vec;
dev->data->scattered_rx = 1;
}
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
index 76db3ca..718133c 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.h
@@ -225,6 +225,7 @@ struct ixgbe_txq_ops {
#ifdef RTE_IXGBE_INC_VECTOR
uint16_t ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
+uint16_t ixgbe_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts);
uint16_t ixgbe_xmit_pkts_vec(void *tx_queue, struct rte_mbuf **tx_pkts, uint16_t nb_pkts);
int ixgbe_txq_vec_setup(struct igb_tx_queue *txq);
int ixgbe_rx_vec_condition_check(struct rte_eth_dev *dev);
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
index ba9d050..badcdb6 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
@@ -38,7 +38,7 @@
#include "ixgbe_ethdev.h"
#include "ixgbe_rxtx.h"
-#include <nmmintrin.h>
+#include <tmmintrin.h>
#ifndef __INTEL_COMPILER
#pragma GCC diagnostic ignored "-Wcast-qual"
@@ -165,12 +165,11 @@ desc_to_olflags_v(__m128i descs[4], struct rte_mbuf **rx_pkts)
* numbers of DD bit
* - don't support ol_flags for rss and csum err
*/
-uint16_t
-ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
- uint16_t nb_pkts)
+static inline uint16_t
+_recv_raw_pkts_vec(struct igb_rx_queue *rxq, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts, uint8_t *split_packet)
{
volatile union ixgbe_adv_rx_desc *rxdp;
- struct igb_rx_queue *rxq = rx_queue;
struct igb_rx_entry *sw_ring;
uint16_t nb_pkts_recd;
int pos;
@@ -183,7 +182,7 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
-rxq->crc_len, /* sub crc on data_len */
0 /* ignore pkt_type field */
);
- __m128i dd_check;
+ __m128i dd_check, eop_check;
if (unlikely(nb_pkts < RTE_IXGBE_VPMD_RX_BURST))
return 0;
@@ -208,6 +207,9 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
/* 4 packets DD mask */
dd_check = _mm_set_epi64x(0x0000000100000001LL, 0x0000000100000001LL);
+ /* 4 packets EOP mask */
+ eop_check = _mm_set_epi64x(0x0000000200000002LL, 0x0000000200000002LL);
+
/* mask to shuffle from desc. to mbuf */
shuf_msk = _mm_set_epi8(
7, 6, 5, 4, /* octet 4~7, 32bits rss */
@@ -219,7 +221,6 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
0xFF, 0xFF /* skip pkt_type field */
);
-
/* Cache is empty -> need to scan the buffer rings, but first move
* the next 'n' mbufs into the cache */
sw_ring = &rxq->sw_ring[rxq->rx_tail];
@@ -228,6 +229,7 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
* A. load 4 packet in one loop
* B. copy 4 mbuf point from swring to rx_pkts
* C. calc the number of DD bits among the 4 packets
+ * [C*. extract the end-of-packet bit, if requested]
* D. fill info. from desc to mbuf
*/
for (pos = 0, nb_pkts_recd = 0; pos < RTE_IXGBE_VPMD_RX_BURST;
@@ -296,7 +298,30 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
pkt_mb2 = _mm_add_epi16(pkt_mb2, crc_adjust);
pkt_mb1 = _mm_add_epi16(pkt_mb1, crc_adjust);
- /* C.3 calc avaialbe number of desc */
+ /* C* extract and record EOP bit */
+ if (split_packet != NULL){
+ __m128i eop_shuf_mask = _mm_set_epi8(
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0xFF, 0xFF, 0xFF, 0xFF,
+ 0x04, 0x0C, 0x00, 0x08
+ );
+
+ /* and with mask to extract bits, flipping 1-0 */
+ __m128i eop_bits = _mm_andnot_si128(staterr, eop_check);
+ /* convert from 0/2 value to a 0/1 value */
+ //eop_bits = _mm_srli_epi32(eop_bits, 1);
+ /* the staterr values are not in order, as the count
+ * count of dd bits doesn't care. However, for end of
+ * packet tracking, we do care, so shuffle. This also
+ * compresses the 32-bit values to 8-bit */
+ eop_bits = _mm_shuffle_epi8(eop_bits, eop_shuf_mask);
+ /* store the resulting 32-bit value */
+ *(int *)split_packet = _mm_cvtsi128_si32(eop_bits);
+ split_packet += RTE_IXGBE_DESCS_PER_LOOP;
+ }
+
+ /* C.3 calc available number of desc */
staterr = _mm_and_si128(staterr, dd_check);
staterr = _mm_packs_epi32(staterr, zero);
@@ -307,7 +332,7 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
pkt_mb1);
/* C.4 calc avaialbe number of desc */
- var = _mm_popcnt_u64(_mm_cvtsi128_si64(staterr));
+ var = __builtin_popcountll(_mm_cvtsi128_si64(staterr));
nb_pkts_recd += var;
if (likely(var != RTE_IXGBE_DESCS_PER_LOOP))
break;
@@ -320,6 +345,127 @@ ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
return nb_pkts_recd;
}
+
+/*
+ * vPMD receive routine, now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
+ * in one loop
+ *
+ * Notice:
+ * - nb_pkts < RTE_IXGBE_VPMD_RX_BURST, just return no packet
+ * - nb_pkts > RTE_IXGBE_VPMD_RX_BURST, only scan RTE_IXGBE_VPMD_RX_BURST
+ * numbers of DD bit
+ * - don't support ol_flags for rss and csum err
+ */
+uint16_t
+ixgbe_recv_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ return _recv_raw_pkts_vec(rx_queue, rx_pkts, nb_pkts, NULL);
+}
+
+static inline uint16_t
+reassemble_packets(struct igb_rx_queue *rxq, struct rte_mbuf **rx_bufs,
+ uint16_t nb_bufs, uint8_t *split_flags)
+{
+ struct rte_mbuf *pkts[RTE_IXGBE_VPMD_RX_BURST]; /*finished pkts*/
+ struct rte_mbuf *start = rxq->pkt_first_seg;
+ struct rte_mbuf *end = rxq->pkt_last_seg;
+ unsigned pkt_idx = 0, buf_idx = 0;
+
+
+ while (buf_idx < nb_bufs) {
+ if (end != NULL) {
+ /* processing a split packet */
+ end->next = rx_bufs[buf_idx];
+ rx_bufs[buf_idx]->data_len += rxq->crc_len;
+
+ start->nb_segs++;
+ start->pkt_len += rx_bufs[buf_idx]->data_len;
+ end = end->next;
+
+ if (!split_flags[buf_idx]) {
+ /* it's the last packet of the set */
+ start->filters = end->filters;
+ start->ol_flags = end->ol_flags;
+ /* we need to strip crc for the whole packet */
+ start->pkt_len -= rxq->crc_len;
+ if (end->data_len > rxq->crc_len)
+ end->data_len -= rxq->crc_len;
+ else {
+ /* free up last mbuf */
+ struct rte_mbuf *secondlast = start;
+ while (secondlast->next != end)
+ secondlast = secondlast->next;
+ secondlast->data_len -= (rxq->crc_len -
+ end->data_len);
+ secondlast->next = NULL;
+ rte_pktmbuf_free(end);
+ end = secondlast;
+ }
+ pkts[pkt_idx++] = start;
+ start = end = NULL;
+ }
+ } else {
+ /* not processing a split packet */
+ if (!split_flags[buf_idx]) {
+ /* not a split packet, save and skip */
+ pkts[pkt_idx++] = rx_bufs[buf_idx];
+ continue;
+ }
+ end = start = rx_bufs[buf_idx];
+ rx_bufs[buf_idx]->data_len += rxq->crc_len;
+ rx_bufs[buf_idx]->pkt_len += rxq->crc_len;
+ }
+ buf_idx++;
+ }
+
+ /* save the partial packet for next time */
+ rxq->pkt_first_seg = start;
+ rxq->pkt_last_seg = end;
+ memcpy(rx_bufs, pkts, pkt_idx * (sizeof(*pkts)));
+ return pkt_idx;
+}
+
+/*
+ * vPMD receive routine that reassembles scattered packets
+ *
+ * Notice:
+ * - don't support ol_flags for rss and csum err
+ * - now only accept (nb_pkts == RTE_IXGBE_VPMD_RX_BURST)
+ */
+uint16_t
+ixgbe_recv_scattered_pkts_vec(void *rx_queue, struct rte_mbuf **rx_pkts,
+ uint16_t nb_pkts)
+{
+ struct igb_rx_queue *rxq = rx_queue;
+ uint8_t split_flags[RTE_IXGBE_VPMD_RX_BURST] = {0};
+
+ /* get some new buffers */
+ uint16_t nb_bufs = _recv_raw_pkts_vec(rxq, rx_pkts, nb_pkts,
+ split_flags);
+ if (nb_bufs == 0)
+ return 0;
+
+ /* happy day case, full burst + no packets to be joined */
+ const uint32_t *split_fl32 = (uint32_t *)split_flags;
+ if (rxq->pkt_first_seg == NULL &&
+ split_fl32[0] == 0 && split_fl32[1] == 0 &&
+ split_fl32[2] == 0 && split_fl32[3] == 0 )
+ return nb_bufs;
+
+ /* reassemble any packets that need reassembly*/
+ unsigned i = 0;
+ if (rxq->pkt_first_seg == NULL ){
+ /* find the first split flag, and only reassemble then*/
+ while (!split_flags[i] && i < nb_bufs)
+ i++;
+ if (i == nb_bufs)
+ return nb_bufs;
+ }
+ return i + reassemble_packets(rxq, &rx_pkts[i], nb_bufs - i,
+ &split_flags[i]);
+}
+
static inline void
vtx1(volatile union ixgbe_adv_tx_desc *txdp,
struct rte_mbuf *pkt, uint64_t flags)
--
1.9.3
next prev parent reply other threads:[~2014-08-11 20:42 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-11 20:44 [dpdk-dev] [RFC PATCH 00/14] Extend the mbuf structure Bruce Richardson
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 01/14] mbuf: rename RTE_MBUF_SCATTER_GATHER into RTE_MBUF_REFCNT Bruce Richardson
2014-08-11 21:45 ` Stephen Hemminger
2014-08-12 7:59 ` Olivier MATZ
2014-08-12 16:25 ` Richardson, Bruce
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 02/14] mbuf: remove rte_ctrlmbuf Bruce Richardson
2014-08-12 8:27 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 03/14] mbuf: remove the rte_pktmbuf structure Bruce Richardson
2014-08-12 8:38 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 04/14] mbuf: replace data pointer by an offset Bruce Richardson
2014-08-12 8:55 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 05/14] mbuf: rename in_port to just port Bruce Richardson
2014-08-12 9:00 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 06/14] mbuf: reorder fields by time-of-use Bruce Richardson
2014-08-12 10:03 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 07/14] ixgbe: rework vector pmd following mbuf changes Bruce Richardson
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 08/14] mbuf: split mbuf across two cache lines Bruce Richardson
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 09/14] Fix performance regression due to moved pool ptr Bruce Richardson
2014-08-12 11:28 ` Olivier MATZ
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 10/14] mbuf: set next pointer to NULL on mbuf free Bruce Richardson
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 11/14] ixgbe: make mbuf_initializer queue variable global Bruce Richardson
2014-08-11 21:47 ` Stephen Hemminger
2014-08-11 22:03 ` Richardson, Bruce
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 12/14] ixgbe: Make vector stores unaligned Bruce Richardson
2014-08-11 20:44 ` [dpdk-dev] [RFC PATCH 13/14] mbuf: cleanup + added in additional mbuf fields Bruce Richardson
2014-08-12 14:18 ` Olivier MATZ
2014-08-11 20:44 ` Bruce Richardson [this message]
2014-08-12 14:43 ` [dpdk-dev] [RFC PATCH 00/14] Extend the mbuf structure Olivier MATZ
2014-08-20 12:22 ` Richardson, Bruce
2014-08-20 7:08 ` Cao, Min
2014-08-20 11:11 ` Richardson, Bruce
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1407789890-17355-15-git-send-email-bruce.richardson@intel.com \
--to=bruce.richardson@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).