From: Helin Zhang <helin.zhang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/3] i40evf: support I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX in DPDK PF host
Date: Wed, 20 Aug 2014 11:33:29 +0800 [thread overview]
Message-ID: <1408505611-6959-2-git-send-email-helin.zhang@intel.com> (raw)
In-Reply-To: <1408505611-6959-1-git-send-email-helin.zhang@intel.com>
To configure VSI queues for VF, Linux PF host supports
operation of I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES with
limited configurations. To support more configurations
(e.g configurable CRC stripping in VF), a new operation
of I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX has been
supported in DPDK PF host.
Signed-off-by: Helin Zhang <helin.zhang@intel.com>
Reviewed-by: Jingjing Wu <jingjing.wu@intel.com>
Reviewed-by: Jing Chen <jing.d.chen@intel.com>
---
lib/librte_pmd_i40e/i40e_pf.c | 90 ++++++++++++++++++++++++++-----------------
lib/librte_pmd_i40e/i40e_pf.h | 7 ++++
2 files changed, 61 insertions(+), 36 deletions(-)
diff --git a/lib/librte_pmd_i40e/i40e_pf.c b/lib/librte_pmd_i40e/i40e_pf.c
index e8b154d..9a03e74 100644
--- a/lib/librte_pmd_i40e/i40e_pf.c
+++ b/lib/librte_pmd_i40e/i40e_pf.c
@@ -327,7 +327,8 @@ send_msg:
static int
i40e_pf_host_hmc_config_rxq(struct i40e_hw *hw,
struct i40e_pf_vf *vf,
- struct i40e_virtchnl_rxq_info *rxq)
+ struct i40e_virtchnl_rxq_info *rxq,
+ struct i40e_virtchnl_queue_pair_extra_info *qpei)
{
int err = I40E_SUCCESS;
struct i40e_hmc_obj_rxq rx_ctx;
@@ -356,7 +357,10 @@ i40e_pf_host_hmc_config_rxq(struct i40e_hw *hw,
rx_ctx.tphdata_ena = 1;
rx_ctx.tphhead_ena = 1;
rx_ctx.lrxqthresh = 2;
- rx_ctx.crcstrip = 1;
+ if (qpei) /* For DPDK PF host */
+ rx_ctx.crcstrip = qpei->crcstrip ? 1 : 0;
+ else /* For Linux PF host */
+ rx_ctx.crcstrip = 1;
rx_ctx.l2tsel = 1;
rx_ctx.prefena = 1;
@@ -411,42 +415,56 @@ i40e_pf_host_hmc_config_txq(struct i40e_hw *hw,
static int
i40e_pf_host_process_cmd_config_vsi_queues(struct i40e_pf_vf *vf,
uint8_t *msg,
- uint16_t msglen)
+ uint16_t msglen,
+ int opcode)
{
struct i40e_hw *hw = I40E_PF_TO_HW(vf->pf);
struct i40e_vsi *vsi = vf->vsi;
- int ret = I40E_SUCCESS;
- struct i40e_virtchnl_vsi_queue_config_info *qconfig =
- (struct i40e_virtchnl_vsi_queue_config_info *)msg;
- int i;
- struct i40e_virtchnl_queue_pair_info *qpair;
-
- if (msg == NULL || msglen <= sizeof(*qconfig) ||
- qconfig->num_queue_pairs > vsi->nb_qps) {
+ struct i40e_virtchnl_vsi_queue_config_info *vc_vqci =
+ (struct i40e_virtchnl_vsi_queue_config_info *)msg;
+ struct i40e_virtchnl_queue_pair_info *vc_qpi;
+ struct i40e_virtchnl_queue_pair_extra_info *vc_qpei = NULL;
+ int i, ret = I40E_SUCCESS;
+
+ if (msg == NULL || msglen <= sizeof(*vc_vqci) ||
+ vc_vqci->num_queue_pairs > vsi->nb_qps) {
PMD_DRV_LOG(ERR, "vsi_queue_config_info argument wrong\n");
ret = I40E_ERR_PARAM;
goto send_msg;
}
- qpair = qconfig->qpair;
- for (i = 0; i < qconfig->num_queue_pairs; i++) {
- if (qpair[i].rxq.queue_id > vsi->nb_qps - 1 ||
- qpair[i].txq.queue_id > vsi->nb_qps - 1) {
+ vc_qpi = vc_vqci->qpair;
+ if (opcode == I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX)
+ vc_qpei = (struct i40e_virtchnl_queue_pair_extra_info *)
+ (((uint8_t *)vc_qpi) +
+ (sizeof(struct i40e_virtchnl_queue_pair_info) *
+ vc_vqci->num_queue_pairs));
+
+ for (i = 0; i < vc_vqci->num_queue_pairs; i++) {
+ if (vc_qpi[i].rxq.queue_id > vsi->nb_qps - 1 ||
+ vc_qpi[i].txq.queue_id > vsi->nb_qps - 1) {
ret = I40E_ERR_PARAM;
goto send_msg;
}
- /* Apply VF RX queue setting to HMC */
- if (i40e_pf_host_hmc_config_rxq(hw, vf, &qpair[i].rxq)
- != I40E_SUCCESS) {
+ /*
+ * Apply VF RX queue setting to HMC.
+ * If the opcode is I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX,
+ * then the extra information of
+ * 'struct i40e_virtchnl_queue_pair_extra_info' is needed,
+ * otherwise set the last parameter to NULL.
+ */
+ if (i40e_pf_host_hmc_config_rxq(hw, vf, &vc_qpi[i].rxq,
+ (vc_qpei != NULL ? (&vc_qpei[i]) : NULL)) !=
+ I40E_SUCCESS) {
PMD_DRV_LOG(ERR, "Configure RX queue HMC failed");
ret = I40E_ERR_PARAM;
goto send_msg;
}
/* Apply VF TX queue setting to HMC */
- if (i40e_pf_host_hmc_config_txq(hw, vf, &qpair[i].txq)
- != I40E_SUCCESS) {
+ if (i40e_pf_host_hmc_config_txq(hw, vf,
+ &vc_qpi[i].txq) != I40E_SUCCESS) {
PMD_DRV_LOG(ERR, "Configure TX queue HMC failed");
ret = I40E_ERR_PARAM;
goto send_msg;
@@ -454,8 +472,8 @@ i40e_pf_host_process_cmd_config_vsi_queues(struct i40e_pf_vf *vf,
}
send_msg:
- i40e_pf_host_send_msg_to_vf(vf, I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES,
- ret, NULL, 0);
+ i40e_pf_host_send_msg_to_vf(vf, opcode, ret, NULL, 0);
+
return ret;
}
@@ -871,8 +889,13 @@ i40e_pf_host_handle_vf_msg(struct rte_eth_dev *dev,
break;
case I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES:
PMD_DRV_LOG(INFO, "OP_CONFIG_VSI_QUEUES received\n");
- i40e_pf_host_process_cmd_config_vsi_queues(vf,
- msg, msglen);
+ i40e_pf_host_process_cmd_config_vsi_queues(vf, msg,
+ msglen, opcode);
+ break;
+ case I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX:
+ PMD_DRV_LOG(INFO, "OP_CONFIG_VSI_QUEUES_EX received\n");
+ i40e_pf_host_process_cmd_config_vsi_queues(vf, msg,
+ msglen, opcode);
break;
case I40E_VIRTCHNL_OP_CONFIG_IRQ_MAP:
PMD_DRV_LOG(INFO, "OP_CONFIG_IRQ_MAP received\n");
@@ -880,23 +903,19 @@ i40e_pf_host_handle_vf_msg(struct rte_eth_dev *dev,
break;
case I40E_VIRTCHNL_OP_ENABLE_QUEUES:
PMD_DRV_LOG(INFO, "OP_ENABLE_QUEUES received\n");
- i40e_pf_host_process_cmd_enable_queues(vf,
- msg, msglen);
+ i40e_pf_host_process_cmd_enable_queues(vf, msg, msglen);
break;
case I40E_VIRTCHNL_OP_DISABLE_QUEUES:
PMD_DRV_LOG(INFO, "OP_DISABLE_QUEUE received\n");
- i40e_pf_host_process_cmd_disable_queues(vf,
- msg, msglen);
+ i40e_pf_host_process_cmd_disable_queues(vf, msg, msglen);
break;
case I40E_VIRTCHNL_OP_ADD_ETHER_ADDRESS:
PMD_DRV_LOG(INFO, "OP_ADD_ETHER_ADDRESS received\n");
- i40e_pf_host_process_cmd_add_ether_address(vf,
- msg, msglen);
+ i40e_pf_host_process_cmd_add_ether_address(vf, msg, msglen);
break;
case I40E_VIRTCHNL_OP_DEL_ETHER_ADDRESS:
PMD_DRV_LOG(INFO, "OP_DEL_ETHER_ADDRESS received\n");
- i40e_pf_host_process_cmd_del_ether_address(vf,
- msg, msglen);
+ i40e_pf_host_process_cmd_del_ether_address(vf, msg, msglen);
break;
case I40E_VIRTCHNL_OP_ADD_VLAN:
PMD_DRV_LOG(INFO, "OP_ADD_VLAN received\n");
@@ -932,10 +951,9 @@ i40e_pf_host_handle_vf_msg(struct rte_eth_dev *dev,
case I40E_VIRTCHNL_OP_FCOE:
PMD_DRV_LOG(ERR, "OP_FCOE received, not supported\n");
default:
- PMD_DRV_LOG(ERR, "%u received, not supported\n",
- opcode);
- i40e_pf_host_send_msg_to_vf(vf, opcode,
- I40E_ERR_PARAM, NULL, 0);
+ PMD_DRV_LOG(ERR, "%u received, not supported\n", opcode);
+ i40e_pf_host_send_msg_to_vf(vf, opcode, I40E_ERR_PARAM,
+ NULL, 0);
break;
}
}
diff --git a/lib/librte_pmd_i40e/i40e_pf.h b/lib/librte_pmd_i40e/i40e_pf.h
index 41b6826..19e1379 100644
--- a/lib/librte_pmd_i40e/i40e_pf.h
+++ b/lib/librte_pmd_i40e/i40e_pf.h
@@ -57,7 +57,14 @@ enum i40e_virtchnl_ops_DPDK {
I40E_VIRTCHNL_OP_GET_LINK_STAT = I40E_VIRTCHNL_OP_EVENT + 0x100,
I40E_VIRTCHNL_OP_CFG_VLAN_OFFLOAD,
I40E_VIRTCHNL_OP_CFG_VLAN_PVID,
+ I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX,
};
+
+/* DPDK extra configurations for queues */
+struct i40e_virtchnl_queue_pair_extra_info {
+ uint8_t crcstrip;
+};
+
struct i40e_virtchnl_vlan_offload_info {
uint16_t vsi_id;
uint8_t enable_vlan_strip;
--
1.8.1.4
next prev parent reply other threads:[~2014-08-20 3:30 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-20 3:33 [dpdk-dev] [PATCH 0/3] support of configurable CRC stripping in VF Helin Zhang
2014-08-20 3:33 ` Helin Zhang [this message]
2014-08-30 14:43 ` [dpdk-dev] [PATCH 1/3] i40evf: support I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX in DPDK PF host Thomas Monjalon
2014-09-15 0:21 ` Zhang, Helin
2014-08-20 3:33 ` [dpdk-dev] [PATCH 2/3] i40evf: support I40E_VIRTCHNL_OP_CONFIG_VSI_QUEUES_EX in i40e VF PMD Helin Zhang
2014-08-30 14:52 ` Thomas Monjalon
2014-08-20 3:33 ` [dpdk-dev] [PATCH 3/3] config: remove useless config of CONFIG_RTE_LIBRTE_I40E_PF_DISABLE_STRIP_CRC Helin Zhang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1408505611-6959-2-git-send-email-helin.zhang@intel.com \
--to=helin.zhang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).