From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 2/7]]app/test-pmd:test VxLAN packet identification
Date: Tue, 26 Aug 2014 15:31:29 +0800 [thread overview]
Message-ID: <1409038294-21693-3-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1409038294-21693-1-git-send-email-jijiang.liu@intel.com>
Add commands to test VxLAN packet identification, which include
- use commands to add/delete VxLAN UDP port.
- use rxonly mode to check VxLAN packet.
Signed-off-by: jijiangl <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
---
app/test-pmd/cmdline.c | 78 ++++++++++++++++++++++++++++++++++++++++++--
app/test-pmd/parameters.c | 13 +++++++
app/test-pmd/rxonly.c | 49 ++++++++++++++++++++++++++++
app/test-pmd/testpmd.c | 8 +++++
app/test-pmd/testpmd.h | 5 +++
5 files changed, 149 insertions(+), 4 deletions(-)
diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b04a4e8..de910db 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -285,6 +285,12 @@ static void cmd_help_long_parsed(void *parsed_result,
" Set the outer VLAN TPID for Packet Filtering on"
" a port\n\n"
+ "rx_vxlan_port add (udp_port) (port_id)\n"
+ " Add an UDP port for VxLAN packet filter on a port\n\n"
+
+ "rx_vxlan_port rm (udp_port) (port_id)\n"
+ " Remove an UDP port for VxLAN packet filter on a port\n\n"
+
"tx_vlan set vlan_id (port_id)\n"
" Set hardware insertion of VLAN ID in packets sent"
" on a port.\n\n"
@@ -296,13 +302,17 @@ static void cmd_help_long_parsed(void *parsed_result,
" Disable hardware insertion of a VLAN header in"
" packets sent on a port.\n\n"
- "tx_checksum set mask (port_id)\n"
+ "tx_checksum set (mask) (port_id)\n"
" Enable hardware insertion of checksum offload with"
- " the 4-bit mask, 0~0xf, in packets sent on a port.\n"
+ " the 8-bit mask, 0~0xff, in packets sent on a port.\n"
" bit 0 - insert ip checksum offload if set\n"
" bit 1 - insert udp checksum offload if set\n"
" bit 2 - insert tcp checksum offload if set\n"
" bit 3 - insert sctp checksum offload if set\n"
+ " bit 4 - insert inner ip checksum offload if set\n"
+ " bit 5 - insert inner udp checksum offload if set\n"
+ " bit 6 - insert inner tcp checksum offload if set\n"
+ " bit 7 - insert inner sctp checksum offload if set\n"
" Please check the NIC datasheet for HW limits.\n\n"
"set fwd (%s)\n"
@@ -2745,8 +2755,9 @@ cmdline_parse_inst_t cmd_tx_cksum_set = {
.f = cmd_tx_cksum_set_parsed,
.data = NULL,
.help_str = "enable hardware insertion of L3/L4checksum with a given "
- "mask in packets sent on a port, the bit mapping is given as, Bit 0 for ip"
- "Bit 1 for UDP, Bit 2 for TCP, Bit 3 for SCTP",
+ "mask in packets sent on a port, the bit mapping is given as, Bit 0 for ip "
+ "Bit 1 for UDP, Bit 2 for TCP, Bit 3 for SCTP, Bit 4 for inner ip "
+ "Bit 5 for inner UDP, Bit 6 for inner TCP, Bit 7 for inner SCTP",
.tokens = {
(void *)&cmd_tx_cksum_set_tx_cksum,
(void *)&cmd_tx_cksum_set_set,
@@ -6211,6 +6222,64 @@ cmdline_parse_inst_t cmd_vf_rate_limit = {
},
};
+/* *** CONFIGURE TUNNEL UDP PORT *** */
+struct cmd_tunnel_udp_config {
+ cmdline_fixed_string_t cmd;
+ cmdline_fixed_string_t what;
+ uint16_t udp_port;
+ uint8_t port_id;
+};
+
+static void
+cmd_tunnel_udp_config_parsed(void *parsed_result,
+ __attribute__((unused)) struct cmdline *cl,
+ __attribute__((unused)) void *data)
+{
+ struct cmd_tunnel_udp_config *res = parsed_result;
+ struct rte_eth_udp_tunnel tunnel_udp;
+ int ret;
+
+ tunnel_udp.udp_port = res->udp_port;
+
+ if (!strcmp(res->cmd, "rx_vxlan_port"))
+ tunnel_udp.prot_type = RTE_TUNNEL_TYPE_VXLAN;
+
+ if (!strcmp(res->what, "add"))
+ ret = rte_eth_dev_udp_tunnel_add(res->port_id, &tunnel_udp, 1);
+ else
+ ret = rte_eth_dev_udp_tunnel_delete(res->port_id, &tunnel_udp, 1);
+
+ if (ret < 0)
+ printf("udp tunneling add error: (%s)\n", strerror(-ret));
+}
+
+cmdline_parse_token_string_t cmd_tunnel_udp_config_cmd =
+ TOKEN_STRING_INITIALIZER(struct cmd_tunnel_udp_config,
+ cmd, "rx_vxlan_port");
+cmdline_parse_token_string_t cmd_tunnel_udp_config_what =
+ TOKEN_STRING_INITIALIZER(struct cmd_tunnel_udp_config,
+ what, "add#rm");
+cmdline_parse_token_num_t cmd_tunnel_udp_config_udp_port =
+ TOKEN_NUM_INITIALIZER(struct cmd_tunnel_udp_config,
+ udp_port, UINT16);
+cmdline_parse_token_num_t cmd_tunnel_udp_config_port_id =
+ TOKEN_NUM_INITIALIZER(struct cmd_tunnel_udp_config,
+ port_id, UINT8);
+
+cmdline_parse_inst_t cmd_tunnel_udp_config = {
+ .f = cmd_tunnel_udp_config_parsed,
+ .data = (void *)0,
+ .help_str = "add/rm an tunneling UDP port filter: "
+ "rx_vxlan_port add udp_port port_id",
+ .tokens = {
+ (void *)&cmd_tunnel_udp_config_cmd,
+ (void *)&cmd_tunnel_udp_config_what,
+ (void *)&cmd_tunnel_udp_config_udp_port,
+ (void *)&cmd_tunnel_udp_config_port_id,
+ NULL,
+ },
+};
+
/* *** CONFIGURE VM MIRROR VLAN/POOL RULE *** */
struct cmd_set_mirror_mask_result {
cmdline_fixed_string_t set;
@@ -7506,6 +7575,7 @@ cmdline_parse_ctx_t main_ctx[] = {
(cmdline_parse_inst_t *)&cmd_vf_rxvlan_filter,
(cmdline_parse_inst_t *)&cmd_queue_rate_limit,
(cmdline_parse_inst_t *)&cmd_vf_rate_limit,
+ (cmdline_parse_inst_t *)&cmd_tunnel_udp_config,
(cmdline_parse_inst_t *)&cmd_set_mirror_mask,
(cmdline_parse_inst_t *)&cmd_set_mirror_link,
(cmdline_parse_inst_t *)&cmd_reset_mirror_rule,
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 9573a43..fda8c1d 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -202,6 +202,10 @@ usage(char* progname)
printf(" --txpkts=X[,Y]*: set TX segment sizes.\n");
printf(" --disable-link-check: disable check on link status when "
"starting/stopping ports.\n");
+ printf(" --tunnel-type=N: set tunneling packet type "
+ "(0 <= N <= 4).(0:non-tunneling packet;1:VxLAN; "
+ "2:GENEVE;3: TEREDO;4: NVGRE)\n");
+
}
#ifdef RTE_LIBRTE_CMDLINE
@@ -600,6 +604,7 @@ launch_args_parse(int argc, char** argv)
{ "no-flush-rx", 0, 0, 0 },
{ "txpkts", 1, 0, 0 },
{ "disable-link-check", 0, 0, 0 },
+ { "tunnel-type", 1, 0, 0 },
{ 0, 0, 0, 0 },
};
@@ -1032,6 +1037,14 @@ launch_args_parse(int argc, char** argv)
else
rte_exit(EXIT_FAILURE, "rxfreet must be >= 0\n");
}
+ if (!strcmp(lgopts[opt_idx].name, "tunnel-type")) {
+ n = atoi(optarg);
+ if ((n >= 0) && (n < RTE_TUNNEL_TYPE_MAX))
+ rx_tunnel_type = (uint16_t)n;
+ else
+ rte_exit(EXIT_FAILURE, "tunnel-type must be 0-%d\n",
+ RTE_TUNNEL_TYPE_MAX);
+ }
if (!strcmp(lgopts[opt_idx].name, "tx-queue-stats-mapping")) {
if (parse_queue_stats_mapping_config(optarg, TX)) {
rte_exit(EXIT_FAILURE,
diff --git a/app/test-pmd/rxonly.c b/app/test-pmd/rxonly.c
index 5f21a3e..4f529f6 100644
--- a/app/test-pmd/rxonly.c
+++ b/app/test-pmd/rxonly.c
@@ -66,6 +66,8 @@
#include <rte_ether.h>
#include <rte_ethdev.h>
#include <rte_string_fns.h>
+#include <rte_ip.h>
+#include <rte_udp.h>
#include "testpmd.h"
@@ -112,6 +114,9 @@ pkt_burst_receive(struct fwd_stream *fs)
uint16_t ol_flags;
uint16_t nb_rx;
uint16_t i;
+ uint8_t ptype;
+ uint8_t is_encapsulation;
+
#ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
uint64_t start_tsc;
uint64_t end_tsc;
@@ -152,6 +157,11 @@ pkt_burst_receive(struct fwd_stream *fs)
eth_hdr = (struct ether_hdr *) mb->pkt.data;
eth_type = RTE_BE_TO_CPU_16(eth_hdr->ether_type);
ol_flags = mb->ol_flags;
+ ptype = mb->reserved;
+
+ is_encapsulation = IS_ETH_IPV4_TUNNEL(ptype) |
+ IS_ETH_IPV6_TUNNEL(ptype);
+
print_ether_addr(" src=", ð_hdr->s_addr);
print_ether_addr(" - dst=", ð_hdr->d_addr);
printf(" - type=0x%04x - length=%u - nb_segs=%d",
@@ -167,6 +177,45 @@ pkt_burst_receive(struct fwd_stream *fs)
if (ol_flags & PKT_RX_VLAN_PKT)
printf(" - VLAN tci=0x%x",
mb->pkt.vlan_macip.f.vlan_tci);
+ if (is_encapsulation) {
+ struct ipv4_hdr *ipv4_hdr;
+ struct ipv6_hdr *ipv6_hdr;
+ struct udp_hdr *udp_hdr;
+ uint8_t l2_len;
+ uint8_t l3_len;
+ uint8_t l4_len;
+ uint8_t l4_proto;
+ struct vxlan_hdr *vxlan_hdr;
+
+ l2_len = sizeof(struct ether_hdr);
+
+ /* Do not support ipv4 option field */
+ if (IS_ETH_IPV4_TUNNEL(ptype)) {
+ l3_len = sizeof(struct ipv4_hdr);
+ ipv4_hdr = (struct ipv4_hdr *) (rte_pktmbuf_mtod(mb,
+ unsigned char *) + l2_len);
+ l4_proto = ipv4_hdr->next_proto_id;
+ } else {
+ l3_len = sizeof(struct ipv6_hdr);
+ ipv6_hdr = (struct ipv6_hdr *) (rte_pktmbuf_mtod(mb,
+ unsigned char *) + l2_len);
+ l4_proto = ipv6_hdr->proto;
+ }
+ if (l4_proto == IPPROTO_UDP) {
+ udp_hdr = (struct udp_hdr *) (rte_pktmbuf_mtod(mb,
+ unsigned char *) + l2_len + l3_len);
+ l4_len = sizeof(struct udp_hdr);
+ vxlan_hdr = (struct vxlan_hdr *) (rte_pktmbuf_mtod(mb,
+ unsigned char *) + l2_len + l3_len
+ + l4_len);
+
+ printf(" - VxLAN packet: packet type =%d, "
+ "Destination UDP port =%d, VNI = %d",
+ ptype, RTE_BE_TO_CPU_16(udp_hdr->dst_port),
+ rte_be_to_cpu_32(vxlan_hdr->vx_vni) >> 8);
+ }
+ }
+ printf(" - Receive queue=0x%x", (unsigned) fs->rx_queue);
printf("\n");
if (ol_flags != 0) {
int rxf;
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index a112559..3d09817 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -243,6 +243,12 @@ uint16_t tx_free_thresh = 0; /* Use default values. */
uint16_t tx_rs_thresh = 0; /* Use default values. */
/*
+ * Configurable value of tunnel type.
+ */
+
+uint8_t rx_tunnel_type = 0; /* Use default values. */
+
+/*
* Configurable value of TX queue flags.
*/
uint32_t txq_flags = 0; /* No flags set. */
@@ -1688,6 +1694,8 @@ init_port_config(void)
port = &ports[pid];
port->dev_conf.rxmode = rx_mode;
port->dev_conf.fdir_conf = fdir_conf;
+ if (rx_tunnel_type == 1)
+ port->dev_conf.tunnel_type = RTE_TUNNEL_TYPE_VXLAN;
if (nb_rxq > 1) {
port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
port->dev_conf.rx_adv_conf.rss_conf.rss_hf = rss_hf;
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index b8322a2..2d656fc 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -80,6 +80,10 @@ typedef uint16_t streamid_t;
#define MAX_QUEUE_ID ((1 << (sizeof(queueid_t) * 8)) - 1)
+/* For FVL NIC */
+#define IS_ETH_IPV4_TUNNEL(ptype) ((ptype > 58) && (ptype < 87))
+#define IS_ETH_IPV6_TUNNEL(ptype) ((ptype > 124) && (ptype < 153))
+
enum {
PORT_TOPOLOGY_PAIRED,
PORT_TOPOLOGY_CHAINED,
@@ -342,6 +346,7 @@ extern uint8_t rx_drop_en;
extern uint16_t tx_free_thresh;
extern uint16_t tx_rs_thresh;
extern uint32_t txq_flags;
+extern uint8_t rx_tunnel_type;
extern uint8_t dcb_config;
extern uint8_t dcb_test;
--
1.7.7.6
next prev parent reply other threads:[~2014-08-26 7:28 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-26 7:31 [dpdk-dev] [PATCH v2 0/7]]Support VxLAN on Fortville Jijiang Liu
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 1/7]i40e:support VxLAN packet identification Jijiang Liu
2014-08-27 14:58 ` Thomas Monjalon
2014-08-28 1:33 ` Liu, Jijiang
2014-08-28 8:33 ` Thomas Monjalon
2014-08-26 7:31 ` Jijiang Liu [this message]
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 3/7]rte_ether:add API of VxLAN packet filter in librte_ether Jijiang Liu
2014-08-27 15:12 ` Thomas Monjalon
2014-08-28 0:55 ` Liu, Jijiang
2014-08-28 8:36 ` Thomas Monjalon
2014-08-28 11:02 ` Liu, Jijiang
2014-08-28 12:31 ` Thomas Monjalon
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 4/7]i40e:implement API of VxLAN packet filter in librte_pmd_i40e Jijiang Liu
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 5/7]]app/testpmd:test VxLAN packet filter API Jijiang Liu
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 6/7]i40e:support VxLAN Tx checksum offload Jijiang Liu
2014-08-26 7:31 ` [dpdk-dev] [PATCH v2 7/7]app/testpmd:test " Jijiang Liu
2014-08-27 8:17 ` [dpdk-dev] [PATCH v2 0/7]]Support VxLAN on Fortville Liu, Yong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409038294-21693-3-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).