From: David Marchand <david.marchand@6wind.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 01/17] ixgbe: use the right debug macro
Date: Mon, 1 Sep 2014 12:24:24 +0200 [thread overview]
Message-ID: <1409567080-27083-2-git-send-email-david.marchand@6wind.com> (raw)
In-Reply-To: <1409567080-27083-1-git-send-email-david.marchand@6wind.com>
- We should not use DEBUGOUT*/DEBUGFUNC macros in non-shared code.
These macros come as compat wrappers for shared code.
- We should avoid calling RTE_LOG directly as pmd provides a wrapper for logs.
Signed-off-by: David Marchand <david.marchand@6wind.com>
---
lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c | 14 ++++----
lib/librte_pmd_ixgbe/ixgbe_bypass.c | 26 +++++++-------
lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 27 +++++++--------
lib/librte_pmd_ixgbe/ixgbe_pf.c | 4 +--
lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 53 +++++++++++++++--------------
5 files changed, 63 insertions(+), 61 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
index 0f0000c..2623419 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c
@@ -63,7 +63,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
rs = IXGBE_SFF_SOFT_RS_SELECT_1G;
break;
default:
- DEBUGOUT("Invalid fixed module speed\n");
+ PMD_DRV_LOG("Invalid fixed module speed");
return;
}
@@ -72,7 +72,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
&eeprom_data);
if (status) {
- DEBUGOUT("Failed to read Rx Rate Select RS0\n");
+ PMD_DRV_LOG("Failed to read Rx Rate Select RS0");
goto out;
}
@@ -82,7 +82,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
eeprom_data);
if (status) {
- DEBUGOUT("Failed to write Rx Rate Select RS0\n");
+ PMD_DRV_LOG("Failed to write Rx Rate Select RS0");
goto out;
}
@@ -91,7 +91,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
&eeprom_data);
if (status) {
- DEBUGOUT("Failed to read Rx Rate Select RS1\n");
+ PMD_DRV_LOG("Failed to read Rx Rate Select RS1");
goto out;
}
@@ -101,7 +101,7 @@ ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
IXGBE_I2C_EEPROM_DEV_ADDR2,
eeprom_data);
if (status) {
- DEBUGOUT("Failed to write Rx Rate Select RS1\n");
+ PMD_DRV_LOG("Failed to write Rx Rate Select RS1");
goto out;
}
out:
@@ -130,7 +130,7 @@ ixgbe_setup_mac_link_multispeed_fixed_fiber(struct ixgbe_hw *hw,
bool link_up = false;
bool negotiation;
- DEBUGFUNC("");
+ PMD_INIT_FUNC_TRACE();
/* Mask off requested but non-supported speeds */
status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation);
@@ -261,7 +261,7 @@ ixgbe_bypass_get_media_type(struct ixgbe_hw *hw)
{
enum ixgbe_media_type media_type;
- DEBUGFUNC("");
+ PMD_INIT_FUNC_TRACE();
if (hw->device_id == IXGBE_DEV_ID_82599_BYPASS) {
media_type = ixgbe_media_type_fiber;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_bypass.c b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
index 1d21dc0..1a980b8 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_bypass.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_bypass.c
@@ -40,20 +40,20 @@
#define BYPASS_STATUS_OFF_MASK 3
/* Macros to check for invlaid function pointers. */
-#define FUNC_PTR_OR_ERR_RET(func, retval) do { \
- if ((func) == NULL) { \
- DEBUGOUT("%s:%d function not supported\n", \
- __func__, __LINE__); \
- return (retval); \
- } \
+#define FUNC_PTR_OR_ERR_RET(func, retval) do { \
+ if ((func) == NULL) { \
+ PMD_DRV_LOG("%s:%d function not supported", \
+ __func__, __LINE__); \
+ return retval; \
+ } \
} while(0)
-#define FUNC_PTR_OR_RET(func) do { \
- if ((func) == NULL) { \
- DEBUGOUT("%s:%d function not supported\n", \
- __func__, __LINE__); \
- return; \
- } \
+#define FUNC_PTR_OR_RET(func) do { \
+ if ((func) == NULL) { \
+ PMD_DRV_LOG("%s:%d function not supported", \
+ __func__, __LINE__); \
+ return; \
+ } \
} while(0)
@@ -114,7 +114,7 @@ ixgbe_bypass_init(struct rte_eth_dev *dev)
/* Only allow BYPASS ops on the first port */
if (hw->device_id != IXGBE_DEV_ID_82599_BYPASS ||
hw->bus.func != 0) {
- DEBUGOUT("bypass function is not supported on that device\n");
+ PMD_DRV_LOG("bypass function is not supported on that device");
return;
}
diff --git a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
index 59122a1..a8a7ed6 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_ethdev.c
@@ -667,7 +667,7 @@ ixgbe_swfw_lock_reset(struct ixgbe_hw *hw)
*/
mask = IXGBE_GSSR_PHY0_SM << hw->bus.func;
if (ixgbe_acquire_swfw_semaphore(hw, mask) < 0) {
- DEBUGOUT1("SWFW phy%d lock released", hw->bus.func);
+ PMD_DRV_LOG(DEBUG, "SWFW phy%d lock released", hw->bus.func);
}
ixgbe_release_swfw_semaphore(hw, mask);
@@ -679,7 +679,7 @@ ixgbe_swfw_lock_reset(struct ixgbe_hw *hw)
*/
mask = IXGBE_GSSR_EEP_SM | IXGBE_GSSR_MAC_CSR_SM | IXGBE_GSSR_SW_MNG_SM;
if (ixgbe_acquire_swfw_semaphore(hw, mask) < 0) {
- DEBUGOUT("SWFW common locks released");
+ PMD_DRV_LOG(DEBUG, "SWFW common locks released");
}
ixgbe_release_swfw_semaphore(hw, mask);
}
@@ -1012,16 +1012,15 @@ eth_ixgbevf_dev_init(__attribute__((unused)) struct eth_driver *eth_drv,
eth_dev->data->mac_addrs = NULL;
return diag;
}
- RTE_LOG(INFO, PMD,
- "\tVF MAC address not assigned by Host PF\n"
- "\tAssign randomly generated MAC address "
- "%02x:%02x:%02x:%02x:%02x:%02x\n",
- perm_addr->addr_bytes[0],
- perm_addr->addr_bytes[1],
- perm_addr->addr_bytes[2],
- perm_addr->addr_bytes[3],
- perm_addr->addr_bytes[4],
- perm_addr->addr_bytes[5]);
+ PMD_INIT_LOG(INFO, "\tVF MAC address not assigned by Host PF");
+ PMD_INIT_LOG(INFO, "\tAssign randomly generated MAC address "
+ "%02x:%02x:%02x:%02x:%02x:%02x",
+ perm_addr->addr_bytes[0],
+ perm_addr->addr_bytes[1],
+ perm_addr->addr_bytes[2],
+ perm_addr->addr_bytes[3],
+ perm_addr->addr_bytes[4],
+ perm_addr->addr_bytes[5]);
}
/* Copy the permanent MAC address */
@@ -1090,7 +1089,7 @@ rte_ixgbe_pmd_init(const char *name __rte_unused, const char *params __rte_unuse
static int
rte_ixgbevf_pmd_init(const char *name __rte_unused, const char *param __rte_unused)
{
- DEBUGFUNC("rte_ixgbevf_pmd_init");
+ PMD_INIT_FUNC_TRACE();
rte_eth_driver_register(&rte_ixgbevf_pmd);
return (0);
@@ -2515,7 +2514,7 @@ ixgbe_dcb_pfc_enable_generic(struct ixgbe_hw *hw,uint8_t tc_num)
fccfg_reg |= IXGBE_FCCFG_TFCE_PRIORITY;
break;
default:
- DEBUGOUT("Flow control param set incorrectly\n");
+ PMD_DRV_LOG(DEBUG, "Flow control param set incorrectly");
ret_val = IXGBE_ERR_CONFIG;
goto out;
break;
diff --git a/lib/librte_pmd_ixgbe/ixgbe_pf.c b/lib/librte_pmd_ixgbe/ixgbe_pf.c
index 170944d..59fb58b 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_pf.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_pf.c
@@ -478,7 +478,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
retval = ixgbe_read_mbx(hw, msgbuf, mbx_size, vf);
if (retval) {
- RTE_LOG(ERR, PMD, "Error mbx recv msg from VF %d\n", vf);
+ PMD_DRV_LOG(ERR, "Error mbx recv msg from VF %d", vf);
return retval;
}
@@ -511,7 +511,7 @@ ixgbe_rcv_msg_from_vf(struct rte_eth_dev *dev, uint16_t vf)
retval = ixgbe_vf_set_vlan(dev, vf, msgbuf);
break;
default:
- RTE_LOG(DEBUG, PMD, "Unhandled Msg %8.8x\n", (unsigned) msgbuf[0]);
+ PMD_DRV_LOG(DEBUG, "Unhandled Msg %8.8x", (unsigned)msgbuf[0]);
retval = IXGBE_ERR_MBX;
break;
}
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
index dfc2076..46962bc 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx.c
@@ -1765,33 +1765,36 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
tx_free_thresh = (uint16_t)((tx_conf->tx_free_thresh) ?
tx_conf->tx_free_thresh : DEFAULT_TX_FREE_THRESH);
if (tx_rs_thresh >= (nb_desc - 2)) {
- RTE_LOG(ERR, PMD, "tx_rs_thresh must be less than the number "
- "of TX descriptors minus 2. (tx_rs_thresh=%u port=%d "
- "queue=%d)\n", (unsigned int)tx_rs_thresh,
- (int)dev->data->port_id, (int)queue_idx);
+ PMD_INIT_LOG(ERR, "tx_rs_thresh must be less than the number "
+ "of TX descriptors minus 2. (tx_rs_thresh=%u "
+ "port=%d queue=%d)\n", (unsigned int)tx_rs_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
return -(EINVAL);
}
if (tx_free_thresh >= (nb_desc - 3)) {
- RTE_LOG(ERR, PMD, "tx_rs_thresh must be less than the "
- "tx_free_thresh must be less than the number of TX "
- "descriptors minus 3. (tx_free_thresh=%u port=%d "
- "queue=%d)\n", (unsigned int)tx_free_thresh,
- (int)dev->data->port_id, (int)queue_idx);
+ PMD_INIT_LOG(ERR, "tx_rs_thresh must be less than the "
+ "tx_free_thresh must be less than the number of "
+ "TX descriptors minus 3. (tx_free_thresh=%u "
+ "port=%d queue=%d)\n",
+ (unsigned int)tx_free_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
return -(EINVAL);
}
if (tx_rs_thresh > tx_free_thresh) {
- RTE_LOG(ERR, PMD, "tx_rs_thresh must be less than or equal to "
- "tx_free_thresh. (tx_free_thresh=%u tx_rs_thresh=%u "
- "port=%d queue=%d)\n", (unsigned int)tx_free_thresh,
- (unsigned int)tx_rs_thresh, (int)dev->data->port_id,
- (int)queue_idx);
+ PMD_INIT_LOG(ERR, "tx_rs_thresh must be less than or equal to "
+ "tx_free_thresh. (tx_free_thresh=%u "
+ "tx_rs_thresh=%u port=%d queue=%d)\n",
+ (unsigned int)tx_free_thresh,
+ (unsigned int)tx_rs_thresh,
+ (int)dev->data->port_id,
+ (int)queue_idx);
return -(EINVAL);
}
if ((nb_desc % tx_rs_thresh) != 0) {
- RTE_LOG(ERR, PMD, "tx_rs_thresh must be a divisor of the "
- "number of TX descriptors. (tx_rs_thresh=%u port=%d "
- "queue=%d)\n", (unsigned int)tx_rs_thresh,
- (int)dev->data->port_id, (int)queue_idx);
+ PMD_INIT_LOG(ERR, "tx_rs_thresh must be a divisor of the "
+ "number of TX descriptors. (tx_rs_thresh=%u "
+ "port=%d queue=%d)\n", (unsigned int)tx_rs_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
return -(EINVAL);
}
@@ -1802,10 +1805,10 @@ ixgbe_dev_tx_queue_setup(struct rte_eth_dev *dev,
* accumulates WTHRESH descriptors.
*/
if ((tx_rs_thresh > 1) && (tx_conf->tx_thresh.wthresh != 0)) {
- RTE_LOG(ERR, PMD, "TX WTHRESH must be set to 0 if "
- "tx_rs_thresh is greater than 1. (tx_rs_thresh=%u "
- "port=%d queue=%d)\n", (unsigned int)tx_rs_thresh,
- (int)dev->data->port_id, (int)queue_idx);
+ PMD_INIT_LOG(ERR, "TX WTHRESH must be set to 0 if "
+ "tx_rs_thresh is greater than 1. (tx_rs_thresh=%u "
+ "port=%d queue=%d)\n", (unsigned int)tx_rs_thresh,
+ (int)dev->data->port_id, (int)queue_idx);
return -(EINVAL);
}
@@ -3279,7 +3282,7 @@ ixgbe_dev_mq_rx_configure(struct rte_eth_dev *dev)
IXGBE_WRITE_REG(hw, IXGBE_MRQC, IXGBE_MRQC_VMDQRT8TCEN);
break;
default:
- RTE_LOG(ERR, PMD, "invalid pool number in IOV mode\n");
+ PMD_INIT_LOG(ERR, "invalid pool number in IOV mode\n");
}
}
@@ -3332,7 +3335,7 @@ ixgbe_dev_mq_tx_configure(struct rte_eth_dev *dev)
break;
default:
mtqc = IXGBE_MTQC_64Q_1PB;
- RTE_LOG(ERR, PMD, "invalid pool number in IOV mode\n");
+ PMD_INIT_LOG(ERR, "invalid pool number in IOV mode\n");
}
IXGBE_WRITE_REG(hw, IXGBE_MTQC, mtqc);
}
@@ -3595,7 +3598,7 @@ ixgbe_dev_tx_init(struct rte_eth_dev *dev)
static inline void
ixgbe_setup_loopback_link_82599(struct ixgbe_hw *hw)
{
- DEBUGFUNC("ixgbe_setup_loopback_link_82599");
+ PMD_INIT_FUNC_TRACE();
if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM) !=
--
1.7.10.4
next prev parent reply other threads:[~2014-09-01 10:20 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-01 10:24 [dpdk-dev] [PATCH v2 00/17] cleanup logs in main PMDs David Marchand
2014-09-01 10:24 ` David Marchand [this message]
2014-09-02 13:43 ` [dpdk-dev] [PATCH v2 01/17] ixgbe: use the right debug macro Jay Rolette
2014-09-02 14:16 ` David Marchand
2014-09-02 14:21 ` Thomas Monjalon
2014-09-02 17:57 ` Jay Rolette
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 02/17] ixgbe/base: add a _RAW macro for use by shared code David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 03/17] ixgbe: clean log messages David Marchand
2014-09-02 15:19 ` Jay Rolette
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 04/17] ixgbe: always log init messages David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 05/17] ixgbe: add a message when forcing scatter mode David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 06/17] ixgbe: add log messages when rx bulk mode is not usable David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 07/17] i40e: use the right debug macro David Marchand
2014-09-02 18:25 ` Jay Rolette
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 08/17] i40e/base: add a _RAW macro for use by shared code David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 09/17] i40e: clean log messages David Marchand
2014-09-02 18:20 ` Jay Rolette
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 10/17] i40e: always log init messages David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 11/17] i40e: add log messages when rx bulk mode is not usable David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 12/17] e1000: use the right debug macro David Marchand
2014-09-02 18:29 ` Jay Rolette
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 13/17] e1000/base: add a _RAW macro for use by shared code David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 14/17] e1000: clean log messages David Marchand
2014-09-02 19:05 ` Jay Rolette
2014-09-02 19:19 ` David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 15/17] e1000: always log init messages David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 16/17] e1000: add a message when forcing scatter mode David Marchand
2014-09-02 19:20 ` David Marchand
2014-09-01 10:24 ` [dpdk-dev] [PATCH v2 17/17] eal: set log level from command line David Marchand
2014-09-12 12:32 ` [dpdk-dev] [PATCH v2 00/17] cleanup logs in main PMDs Bruce Richardson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409567080-27083-2-git-send-email-david.marchand@6wind.com \
--to=david.marchand@6wind.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).