From: Huawei Xie <huawei.xie@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 2/3] lib/librte_vhost: vhost library support to facilitate integration with DPDK accelerated vswitch
Date: Tue, 2 Sep 2014 16:55:30 +0800 [thread overview]
Message-ID: <1409648131-4301-3-git-send-email-huawei.xie@intel.com> (raw)
In-Reply-To: <1409648131-4301-1-git-send-email-huawei.xie@intel.com>
This library is turned off by default so that it doesn't break build on default system.
Install fuse development library and turn it on.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Thomos Long <thomas.long@intel.com>
---
config/common_linuxapp | 7 +
lib/Makefile | 1 +
lib/librte_vhost/Makefile | 48 ++
lib/librte_vhost/eventfd_link/Makefile | 39 +
lib/librte_vhost/eventfd_link/eventfd_link.c | 196 +++++
lib/librte_vhost/eventfd_link/eventfd_link.h | 40 +
lib/librte_vhost/rte_virtio_net.h | 222 +++++
lib/librte_vhost/vhost-net-cdev.c | 394 +++++++++
lib/librte_vhost/vhost-net-cdev.h | 119 +++
lib/librte_vhost/vhost_rxtx.c | 316 ++++++++
lib/librte_vhost/virtio-net.c | 1113 ++++++++++++++++++++++++++
mk/rte.app.mk | 5 +
12 files changed, 2500 insertions(+)
create mode 100644 lib/librte_vhost/Makefile
create mode 100644 lib/librte_vhost/eventfd_link/Makefile
create mode 100644 lib/librte_vhost/eventfd_link/eventfd_link.c
create mode 100644 lib/librte_vhost/eventfd_link/eventfd_link.h
create mode 100644 lib/librte_vhost/rte_virtio_net.h
create mode 100644 lib/librte_vhost/vhost-net-cdev.c
create mode 100644 lib/librte_vhost/vhost-net-cdev.h
create mode 100644 lib/librte_vhost/vhost_rxtx.c
create mode 100644 lib/librte_vhost/virtio-net.c
diff --git a/config/common_linuxapp b/config/common_linuxapp
index 9047975..c7c1c83 100644
--- a/config/common_linuxapp
+++ b/config/common_linuxapp
@@ -390,6 +390,13 @@ CONFIG_RTE_KNI_VHOST_DEBUG_RX=n
CONFIG_RTE_KNI_VHOST_DEBUG_TX=n
#
+# Compile vhost library
+# fuse, fuse-devel, kernel-modules-extra packages are needed
+#
+CONFIG_RTE_LIBRTE_VHOST=n
+CONFIG_RTE_LIBRTE_VHOST_DEBUG=n
+
+#
#Compile Xen domain0 support
#
CONFIG_RTE_LIBRTE_XEN_DOM0=n
diff --git a/lib/Makefile b/lib/Makefile
index 10c5bb3..007c174 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -60,6 +60,7 @@ DIRS-$(CONFIG_RTE_LIBRTE_METER) += librte_meter
DIRS-$(CONFIG_RTE_LIBRTE_SCHED) += librte_sched
DIRS-$(CONFIG_RTE_LIBRTE_KVARGS) += librte_kvargs
DIRS-$(CONFIG_RTE_LIBRTE_DISTRIBUTOR) += librte_distributor
+DIRS-$(CONFIG_RTE_LIBRTE_VHOST) += librte_vhost
DIRS-$(CONFIG_RTE_LIBRTE_PORT) += librte_port
DIRS-$(CONFIG_RTE_LIBRTE_TABLE) += librte_table
DIRS-$(CONFIG_RTE_LIBRTE_PIPELINE) += librte_pipeline
diff --git a/lib/librte_vhost/Makefile b/lib/librte_vhost/Makefile
new file mode 100644
index 0000000..6ad706d
--- /dev/null
+++ b/lib/librte_vhost/Makefile
@@ -0,0 +1,48 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+# library name
+LIB = librte_vhost.a
+
+CFLAGS += $(WERROR_FLAGS) -I$(SRCDIR) -O3 -D_FILE_OFFSET_BITS=64 -lfuse
+LDFLAGS += -lfuse
+# all source are stored in SRCS-y
+SRCS-$(CONFIG_RTE_LIBRTE_VHOST) := vhost-net-cdev.c virtio-net.c vhost_rxtx.c
+
+# install includes
+SYMLINK-$(CONFIG_RTE_LIBRTE_VHOST)-include += rte_virtio_net.h
+
+# this lib needs eal
+DEPDIRS-$(CONFIG_RTE_LIBRTE_VHOST) += lib/librte_eal lib/librte_mbuf
+
+include $(RTE_SDK)/mk/rte.lib.mk
diff --git a/lib/librte_vhost/eventfd_link/Makefile b/lib/librte_vhost/eventfd_link/Makefile
new file mode 100644
index 0000000..fc3927b
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/Makefile
@@ -0,0 +1,39 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+obj-m += eventfd_link.o
+
+
+all:
+ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
+
+clean:
+ make -C /lib/modules/$(shell uname -r)/build M=$(PWD) clean
diff --git a/lib/librte_vhost/eventfd_link/eventfd_link.c b/lib/librte_vhost/eventfd_link/eventfd_link.c
new file mode 100644
index 0000000..61720f7
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/eventfd_link.c
@@ -0,0 +1,196 @@
+/*-
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation
+ */
+
+#include <linux/eventfd.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/rcupdate.h>
+#include <linux/file.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/mmu_context.h>
+#include <linux/sched.h>
+#include <asm/mmu_context.h>
+#include <linux/fdtable.h>
+
+#include "eventfd_link.h"
+
+
+/*
+ * get_files_struct is copied from fs/file.c
+ */
+struct files_struct *
+get_files_struct(struct task_struct *task)
+{
+ struct files_struct *files;
+
+ task_lock(task);
+ files = task->files;
+ if (files)
+ atomic_inc(&files->count);
+ task_unlock(task);
+
+ return files;
+}
+
+/*
+ * put_files_struct is extracted from fs/file.c
+ */
+void
+put_files_struct(struct files_struct *files)
+{
+ if (atomic_dec_and_test(&files->count))
+ BUG();
+}
+
+
+static long
+eventfd_link_ioctl(struct file *f, unsigned int ioctl, unsigned long arg)
+{
+ void __user *argp = (void __user *) arg;
+ struct task_struct *task_target = NULL;
+ struct file *file;
+ struct files_struct *files;
+ struct fdtable *fdt;
+ struct eventfd_copy eventfd_copy;
+
+ switch (ioctl) {
+ case EVENTFD_COPY:
+ if (copy_from_user(&eventfd_copy, argp,
+ sizeof(struct eventfd_copy)))
+ return -EFAULT;
+
+ /*
+ * Find the task struct for the target pid
+ */
+ task_target =
+ pid_task(find_vpid(eventfd_copy.target_pid),
+ PIDTYPE_PID);
+ if (task_target == NULL) {
+ printk(KERN_DEBUG "Failed to get mem ctx for target pid\n");
+ return -EFAULT;
+ }
+
+ files = get_files_struct(current);
+ if (files == NULL) {
+ printk(KERN_DEBUG "Failed to get files struct\n");
+ return -EFAULT;
+ }
+
+ rcu_read_lock();
+ file = fcheck_files(files, eventfd_copy.source_fd);
+ if (file) {
+ if (file->f_mode & FMODE_PATH
+ || !atomic_long_inc_not_zero(&file->f_count))
+ file = NULL;
+ }
+ rcu_read_unlock();
+ put_files_struct(files);
+
+ if (file == NULL) {
+ printk(KERN_DEBUG "Failed to get file from source pid\n");
+ return 0;
+ }
+
+ /*
+ * Release the existing eventfd in the source process
+ */
+ spin_lock(&files->file_lock);
+ filp_close(file, files);
+ fdt = files_fdtable(files);
+ fdt->fd[eventfd_copy.source_fd] = NULL;
+ spin_unlock(&files->file_lock);
+
+ /*
+ * Find the file struct associated with the target fd.
+ */
+
+ files = get_files_struct(task_target);
+ if (files == NULL) {
+ printk(KERN_DEBUG "Failed to get files struct\n");
+ return -EFAULT;
+ }
+
+ rcu_read_lock();
+ file = fcheck_files(files, eventfd_copy.target_fd);
+ if (file) {
+ if (file->f_mode & FMODE_PATH
+ || !atomic_long_inc_not_zero(&file->f_count))
+ file = NULL;
+ }
+ rcu_read_unlock();
+ put_files_struct(files);
+
+ if (file == NULL) {
+ printk(KERN_DEBUG "Failed to get file from target pid\n");
+ return 0;
+ }
+
+
+ /*
+ * Install the file struct from the target process into the
+ * file desciptor of the source process,
+ */
+
+ fd_install(eventfd_copy.source_fd, file);
+
+ return 0;
+
+ default:
+ return -ENOIOCTLCMD;
+ }
+}
+
+static const struct file_operations eventfd_link_fops = {
+ .owner = THIS_MODULE,
+ .unlocked_ioctl = eventfd_link_ioctl,
+};
+
+
+static struct miscdevice eventfd_link_misc = {
+ .name = "eventfd-link",
+ .fops = &eventfd_link_fops,
+};
+
+static int __init
+eventfd_link_init(void)
+{
+ return misc_register(&eventfd_link_misc);
+}
+
+module_init(eventfd_link_init);
+
+static void __exit
+eventfd_link_exit(void)
+{
+ misc_deregister(&eventfd_link_misc);
+}
+
+module_exit(eventfd_link_exit);
+
+MODULE_VERSION("0.0.1");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Anthony Fee");
+MODULE_DESCRIPTION("Link eventfd");
+MODULE_ALIAS("devname:eventfd-link");
diff --git a/lib/librte_vhost/eventfd_link/eventfd_link.h b/lib/librte_vhost/eventfd_link/eventfd_link.h
new file mode 100644
index 0000000..113c28e
--- /dev/null
+++ b/lib/librte_vhost/eventfd_link/eventfd_link.h
@@ -0,0 +1,40 @@
+/*-
+ * GPL LICENSE SUMMARY
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; If not, see <http://www.gnu.org/licenses/>.
+ * The full GNU General Public License is included in this distribution
+ * in the file called LICENSE.GPL.
+ *
+ * Contact Information:
+ * Intel Corporation
+ */
+
+#ifndef _EVENTFD_LINK_H_
+#define _EVENTFD_LINK_H_
+
+/*
+ * ioctl to copy an fd entry in calling process to an fd in a target process
+ */
+#define EVENTFD_COPY 1
+
+/*
+ * arguements for the EVENTFD_COPY ioctl
+ */
+struct eventfd_copy {
+ unsigned target_fd; /**< fd in the target pid */
+ unsigned source_fd; /**< fd in the calling pid */
+ pid_t target_pid; /**< pid of the target pid */
+};
+#endif /* _EVENTFD_LINK_H_ */
diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
new file mode 100644
index 0000000..6821e9f
--- /dev/null
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -0,0 +1,222 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VIRTIO_NET_H_
+#define _VIRTIO_NET_H_
+
+#include <stdint.h>
+#include <linux/virtio_ring.h>
+#include <linux/virtio_net.h>
+#include <sys/eventfd.h>
+
+#include <rte_memory.h>
+#include <rte_mempool.h>
+#include <rte_mbuf.h>
+
+/**< Used to indicate that the device is running on a data core. */
+#define VIRTIO_DEV_RUNNING 1
+/**< Backend value set by guest. */
+#define VIRTIO_DEV_STOPPED -1
+
+/* Enum for virtqueue management. */
+enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
+
+/**
+ * Structure contains variables relevant to RX/TX virtqueues.
+ */
+struct vhost_virtqueue {
+ /**< descriptor ring. */
+ struct vring_desc *desc;
+ /**< available ring. */
+ struct vring_avail *avail;
+ /**< used ring. */
+ struct vring_used *used;
+ /**< Size of descriptor ring. */
+ uint32_t size;
+ /**< Backend value to determine if device should be started/stopped. */
+ uint32_t backend;
+ /**< Vhost header length (varies depending on RX merge buffers. */
+ uint16_t vhost_hlen;
+ /**< Last index used on the available ring. */
+ volatile uint16_t last_used_idx;
+ /**< Used for multiple devices reserving buffers. */
+ volatile uint16_t last_used_idx_res;
+ /**< Currently unused as polling mode is enabled. */
+ eventfd_t callfd;
+ /**< Used to notify the guest (trigger interrupt). */
+ eventfd_t kickfd;
+} __rte_cache_aligned;
+
+/**
+ * Information relating to memory regions including offsets to
+ * addresses in QEMUs memory file.
+ */
+struct virtio_memory_regions {
+ /**< Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /**< End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /**< Size of region. */
+ uint64_t memory_size;
+ /**< Base userspace address of region. */
+ uint64_t userspace_address;
+ /**< Offset of region for address translation. */
+ uint64_t address_offset;
+};
+
+
+/**
+ * Memory structure includes region and mapping information.
+ */
+struct virtio_memory {
+ /**< Base QEMU userspace address of the memory file. */
+ uint64_t base_address;
+ /**< Mapped address of memory file in this process's memory space. */
+ uint64_t mapped_address;
+ /**< Total size of memory file. */
+ uint64_t mapped_size;
+ /**< Number of memory regions. */
+ uint32_t nregions;
+ /**< Memory region information. */
+ struct virtio_memory_regions regions[0];
+};
+
+/**
+ * Device structure contains all configuration information relating to the device.
+ */
+struct virtio_net {
+ /**< Contains all virtqueue information. */
+ struct vhost_virtqueue *virtqueue[VIRTIO_QNUM];
+ /**< QEMU memory and memory region information. */
+ struct virtio_memory *mem;
+ /**< Negotiated feature set. */
+ uint64_t features;
+ /**< Device identifier. */
+ uint64_t device_fh;
+ /**< Device flags, used to check if device is running on data core. */
+ uint32_t flags;
+ void *priv;
+} __rte_cache_aligned;
+
+/**
+ * Device operations to add/remove device.
+ */
+struct virtio_net_device_ops {
+ int (*new_device)(struct virtio_net *);/**< Add device. */
+ void (*destroy_device)(struct virtio_net *); /**< Remove device. */
+};
+
+
+static inline uint16_t __attribute__((always_inline))
+rte_vring_available_entries(struct virtio_net *dev, uint16_t queue_id)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[queue_id];
+ return *(volatile uint16_t *)&vq->avail->idx - vq->last_used_idx_res;
+}
+
+/**
+ * Function to convert guest physical addresses to vhost virtual addresses.
+ * This is used to convert guest virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
+{
+ struct virtio_memory_regions *region;
+ uint32_t regionidx;
+ uint64_t vhost_va = 0;
+
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ region = &dev->mem->regions[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_va = region->address_offset + guest_pa;
+ break;
+ }
+ }
+ return vhost_va;
+}
+
+/**
+ * Disable features in feature_mask. Returns 0 on success.
+ */
+int rte_vhost_feature_disable(uint64_t feature_mask);
+
+/**
+ * Enable features in feature_mask. Returns 0 on success.
+ */
+int rte_vhost_feature_enable(uint64_t feature_mask);
+
+/* Returns currently supported vhost features */
+uint64_t rte_vhost_feature_get(void);
+
+int rte_vhost_enable_guest_notification(struct virtio_net *dev,
+ uint16_t queue_id, int enable);
+
+/* Register vhost driver. dev_name could be different for multiple instance
+ * support.
+ */
+int rte_vhost_driver_register(const char *dev_name);
+
+/* Register callbacks. */
+int rte_vhost_driver_callback_register(struct virtio_net_device_ops const * const);
+
+int rte_vhost_driver_session_start(void);
+
+/**
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtual device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue.
+ * @param queue_id
+ * virtio queue index in mq case
+ * @return
+ * num of packets enqueued
+ */
+uint32_t rte_vhost_enqueue_burst(struct virtio_net *dev, uint16_t queue_id,
+ struct rte_mbuf **pkts, uint32_t count);
+
+/**
+ * This function gets guest buffers from the virtio device TX virtqueue,
+ * construct host mbufs, copies guest buffer content to host mbufs and
+ * store them in pkts to be processed.
+ * @param mbuf_pool
+ * mbuf_pool where host mbuf is allocated.
+ * @param queue_id
+ * virtio queue index in mq case.
+ * @return
+ * num of packets dequeued
+ */
+uint32_t rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
+ struct rte_mempool *mbuf_pool, struct rte_mbuf **pkts, uint32_t count);
+
+#endif /* _VIRTIO_NET_H_ */
diff --git a/lib/librte_vhost/vhost-net-cdev.c b/lib/librte_vhost/vhost-net-cdev.c
new file mode 100644
index 0000000..d5f4097
--- /dev/null
+++ b/lib/librte_vhost/vhost-net-cdev.c
@@ -0,0 +1,394 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <errno.h>
+#include <fuse/cuse_lowlevel.h>
+#include <linux/limits.h>
+#include <linux/vhost.h>
+#include <stdint.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_virtio_net.h>
+
+#include "vhost-net-cdev.h"
+
+#define FUSE_OPT_DUMMY "\0\0"
+#define FUSE_OPT_FORE "-f\0\0"
+#define FUSE_OPT_NOMULTI "-s\0\0"
+
+static const uint32_t default_major = 231;
+static const uint32_t default_minor = 1;
+static const char cuse_device_name[] = "/dev/cuse";
+static const char default_cdev[] = "vhost-net";
+
+static struct fuse_session *session;
+static struct vhost_net_device_ops const *ops;
+
+/**
+ * Returns vhost_device_ctx from given fuse_req_t. The index is populated later
+ * when the device is added to the device linked list.
+ */
+static struct vhost_device_ctx
+fuse_req_to_vhost_ctx(fuse_req_t req, struct fuse_file_info *fi)
+{
+ struct vhost_device_ctx ctx;
+ struct fuse_ctx const *const req_ctx = fuse_req_ctx(req);
+
+ ctx.pid = req_ctx->pid;
+ ctx.fh = fi->fh;
+
+ return ctx;
+}
+
+/**
+ * When the device is created in QEMU it gets initialised here and
+ * added to the device linked list.
+ */
+static void
+vhost_net_open(fuse_req_t req, struct fuse_file_info *fi)
+{
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+ int err = 0;
+
+ err = ops->new_device(ctx);
+ if (err == -1) {
+ fuse_reply_err(req, EPERM);
+ return;
+ }
+
+ fi->fh = err;
+
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "(%"PRIu64") Device configuration started\n", fi->fh);
+ fuse_reply_open(req, fi);
+}
+
+/*
+ * When QEMU is shutdown or killed the device gets released.
+ */
+static void
+vhost_net_release(fuse_req_t req, struct fuse_file_info *fi)
+{
+ int err = 0;
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+
+ ops->destroy_device(ctx);
+ RTE_LOG(INFO, VHOST_CONFIG, "(%"PRIu64") Device released\n", ctx.fh);
+ fuse_reply_err(req, err);
+}
+
+/*
+ * Boilerplate code for CUSE IOCTL
+ * Implicit arguments: ctx, req, result.
+ */
+#define VHOST_IOCTL(func) do { \
+ result = (func)(ctx); \
+ fuse_reply_ioctl(req, result, NULL, 0); \
+} while (0)
+
+/*
+ * Boilerplate IOCTL RETRY
+ * Implicit arguments: req.
+ */
+#define VHOST_IOCTL_RETRY(size_r, size_w) do { \
+ struct iovec iov_r = { arg, (size_r) }; \
+ struct iovec iov_w = { arg, (size_w) }; \
+ fuse_reply_ioctl_retry(req, &iov_r, (size_r) ? 1 : 0, &iov_w, \
+ (size_w) ? 1 : 0); \
+} while (0) \
+
+/*
+ * Boilerplate code for CUSE Read IOCTL
+ * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
+ */
+#define VHOST_IOCTL_R(type, var, func) do { \
+ if (!in_bufsz) { \
+ VHOST_IOCTL_RETRY(sizeof(type), 0); \
+ } else { \
+ (var) = *(const type*)in_buf; \
+ result = func(ctx, &(var)); \
+ fuse_reply_ioctl(req, result, NULL, 0); \
+ } \
+} while (0)
+
+/*
+ * Boilerplate code for CUSE Write IOCTL
+ * Implicit arguments: ctx, req, result, out_bufsz.
+ */
+#define VHOST_IOCTL_W(type, var, func) do { \
+ if (!out_bufsz) { \
+ VHOST_IOCTL_RETRY(0, sizeof(type)); \
+ } else { \
+ result = (func)(ctx, &(var)); \
+ fuse_reply_ioctl(req, result, &(var), sizeof(type)); \
+ } \
+} while (0)
+
+/*
+ * Boilerplate code for CUSE Read/Write IOCTL
+ * Implicit arguments: ctx, req, result, in_bufsz, in_buf.
+ */
+#define VHOST_IOCTL_RW(type1, var1, type2, var2, func) do { \
+ if (!in_bufsz) { \
+ VHOST_IOCTL_RETRY(sizeof(type1), sizeof(type2)); \
+ } else { \
+ (var1) = *(const type1*) (in_buf); \
+ result = (func)(ctx, (var1), &(var2)); \
+ fuse_reply_ioctl(req, result, &(var2), sizeof(type2)); \
+ } \
+} while (0)
+
+/**
+ * The IOCTLs are handled using CUSE/FUSE in userspace. Depending on
+ * the type of IOCTL a buffer is requested to read or to write. This
+ * request is handled by FUSE and the buffer is then given to CUSE.
+ */
+static void
+vhost_net_ioctl(fuse_req_t req, int cmd, void *arg,
+ struct fuse_file_info *fi, __rte_unused unsigned flags,
+ const void *in_buf, size_t in_bufsz, size_t out_bufsz)
+{
+ struct vhost_device_ctx ctx = fuse_req_to_vhost_ctx(req, fi);
+ struct vhost_vring_file file;
+ struct vhost_vring_state state;
+ struct vhost_vring_addr addr;
+ uint64_t features;
+ uint32_t index;
+ int result = 0;
+
+ switch (cmd) {
+
+ case VHOST_NET_SET_BACKEND:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_NET_SET_BACKEND\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file, ops->set_backend);
+ break;
+
+ case VHOST_GET_FEATURES:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_GET_FEATURES\n", ctx.fh);
+ VHOST_IOCTL_W(uint64_t, features, ops->get_features);
+ break;
+
+ case VHOST_SET_FEATURES:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_FEATURES\n", ctx.fh);
+ VHOST_IOCTL_R(uint64_t, features, ops->set_features);
+ break;
+
+ case VHOST_RESET_OWNER:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_RESET_OWNER\n", ctx.fh);
+ VHOST_IOCTL(ops->reset_owner);
+ break;
+
+ case VHOST_SET_OWNER:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_OWNER\n", ctx.fh);
+ VHOST_IOCTL(ops->set_owner);
+ break;
+
+ case VHOST_SET_MEM_TABLE:
+ /*TODO fix race condition.*/
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_MEM_TABLE\n", ctx.fh);
+ static struct vhost_memory mem_temp;
+
+ switch (in_bufsz) {
+ case 0:
+ VHOST_IOCTL_RETRY(sizeof(struct vhost_memory), 0);
+ break;
+
+ case sizeof(struct vhost_memory):
+ mem_temp = *(const struct vhost_memory *) in_buf;
+
+ if (mem_temp.nregions > 0) {
+ VHOST_IOCTL_RETRY(sizeof(struct vhost_memory) +
+ (sizeof(struct vhost_memory_region) *
+ mem_temp.nregions), 0);
+ } else {
+ result = -1;
+ fuse_reply_ioctl(req, result, NULL, 0);
+ }
+ break;
+
+ default:
+ result = ops->set_mem_table(ctx, in_buf,
+ mem_temp.nregions);
+ if (result)
+ fuse_reply_err(req, EINVAL);
+ else
+ fuse_reply_ioctl(req, result, NULL, 0);
+
+ }
+
+ break;
+
+ case VHOST_SET_VRING_NUM:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_VRING_NUM\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_state, state,
+ ops->set_vring_num);
+ break;
+
+ case VHOST_SET_VRING_BASE:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_VRING_BASE\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_state, state,
+ ops->set_vring_base);
+ break;
+
+ case VHOST_GET_VRING_BASE:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_GET_VRING_BASE\n", ctx.fh);
+ VHOST_IOCTL_RW(uint32_t, index, struct vhost_vring_state,
+ state, ops->get_vring_base);
+ break;
+
+ case VHOST_SET_VRING_ADDR:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_VRING_ADDR\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_addr, addr,
+ ops->set_vring_addr);
+ break;
+
+ case VHOST_SET_VRING_KICK:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_VRING_KICK\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file,
+ ops->set_vring_kick);
+ break;
+
+ case VHOST_SET_VRING_CALL:
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: VHOST_SET_VRING_CALL\n", ctx.fh);
+ VHOST_IOCTL_R(struct vhost_vring_file, file,
+ ops->set_vring_call);
+ break;
+
+ default:
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") IOCTL: DOESN NOT EXIST\n", ctx.fh);
+ result = -1;
+ fuse_reply_ioctl(req, result, NULL, 0);
+ }
+
+ if (result < 0)
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: FAIL\n", ctx.fh);
+ else
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") IOCTL: SUCCESS\n", ctx.fh);
+}
+
+/**
+ * Structure handling open, release and ioctl function pointers is populated.
+ */
+static const struct cuse_lowlevel_ops vhost_net_ops = {
+ .open = vhost_net_open,
+ .release = vhost_net_release,
+ .ioctl = vhost_net_ioctl,
+};
+
+/**
+ * cuse_info is populated and used to register the cuse device.
+ * vhost_net_device_ops is passed when the device is registered in main.c.
+ */
+int
+rte_vhost_driver_register(const char *dev_name)
+{
+ struct cuse_info cuse_info;
+ char device_name[PATH_MAX] = "";
+ char char_device_name[PATH_MAX] = "";
+ const char *device_argv[] = { device_name };
+
+ char fuse_opt_dummy[] = FUSE_OPT_DUMMY;
+ char fuse_opt_fore[] = FUSE_OPT_FORE;
+ char fuse_opt_nomulti[] = FUSE_OPT_NOMULTI;
+ char *fuse_argv[] = {fuse_opt_dummy, fuse_opt_fore, fuse_opt_nomulti};
+
+ if (access(cuse_device_name, R_OK | W_OK) < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "Character device %s can't be accessed, maybe not exist\n",
+ cuse_device_name);
+ return -1;
+ }
+
+ /*
+ * The device name is created. This is passed to QEMU so that it can
+ * register the device with our application. The dev_name allows us to
+ * have multiple instances of userspace vhost which we can then add
+ * devices to separately.
+ */
+ snprintf(device_name, PATH_MAX, "DEVNAME=%s", dev_name);
+ snprintf(char_device_name, PATH_MAX, "/dev/%s", dev_name);
+
+ /* Check if device already exists. */
+ if (access(char_device_name, F_OK) != -1) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "Character device %s already exists\n",
+ char_device_name);
+ return -1;
+ }
+
+ memset(&cuse_info, 0, sizeof(cuse_info));
+ cuse_info.dev_major = default_major;
+ cuse_info.dev_minor = default_minor;
+ cuse_info.dev_info_argc = 1;
+ cuse_info.dev_info_argv = device_argv;
+ cuse_info.flags = CUSE_UNRESTRICTED_IOCTL;
+
+ ops = get_virtio_net_callbacks();
+
+ session = cuse_lowlevel_setup(3, fuse_argv,
+ &cuse_info, &vhost_net_ops, 0, NULL);
+ if (session == NULL)
+ return -1;
+
+ return 0;
+}
+
+
+/**
+ * The CUSE session is launched allowing the application to receive open,
+ * release and ioctl calls.
+ */
+int
+rte_vhost_driver_session_start(void)
+{
+ fuse_session_loop(session);
+
+ return 0;
+}
diff --git a/lib/librte_vhost/vhost-net-cdev.h b/lib/librte_vhost/vhost-net-cdev.h
new file mode 100644
index 0000000..ea2a28f
--- /dev/null
+++ b/lib/librte_vhost/vhost-net-cdev.h
@@ -0,0 +1,119 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <stdio.h>
+#include <sys/types.h>
+#include <unistd.h>
+#include <linux/vhost.h>
+
+#include <rte_log.h>
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER1
+
+#ifdef RTE_LIBRTE_VHOST_DEBUG
+#define VHOST_MAX_PRINT_BUFF 6072
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) RTE_LOG(DEBUG, log_type, fmt, ##args)
+#define VHOST_PRINT_PACKET(device, addr, size, header) do { \
+ char *pkt_addr = (char *)(addr); \
+ unsigned int index; \
+ char packet[VHOST_MAX_PRINT_BUFF]; \
+ \
+ if ((header)) \
+ snprintf(packet, VHOST_MAX_PRINT_BUFF, \
+ "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
+ else \
+ snprintf(packet, VHOST_MAX_PRINT_BUFF, \
+ "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
+ for (index = 0; index < (size); index++) { \
+ snprintf(packet + strnlen(packet, VHOST_MAX_PRINT_BUFF), \
+ VHOST_MAX_PRINT_BUFF - strnlen(packet, VHOST_MAX_PRINT_BUFF), \
+ "%02hhx ", pkt_addr[index]); \
+ } \
+ snprintf(packet + strnlen(packet, VHOST_MAX_PRINT_BUFF), \
+ VHOST_MAX_PRINT_BUFF - strnlen(packet, VHOST_MAX_PRINT_BUFF), "\n"); \
+ \
+ LOG_DEBUG(VHOST_DATA, "%s", packet); \
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do {} while (0)
+#define VHOST_PRINT_PACKET(device, addr, size, header) do {} while (0)
+#endif
+
+/**
+ * Structure used to identify device context.
+ */
+struct vhost_device_ctx {
+ pid_t pid; /**< PID of process calling the IOCTL. */
+ uint64_t fh; /**< Populated with fi->fh to track the device index. */
+};
+
+/**
+ * Structure contains function pointers to be defined in virtio-net.c. These
+ * functions are called in CUSE context and are used to configure devices.
+ */
+struct vhost_net_device_ops {
+ int (*new_device)(struct vhost_device_ctx);
+ void (*destroy_device)(struct vhost_device_ctx);
+
+ int (*get_features)(struct vhost_device_ctx, uint64_t *);
+ int (*set_features)(struct vhost_device_ctx, uint64_t *);
+
+ int (*set_mem_table)(struct vhost_device_ctx, const void *, uint32_t);
+
+ int (*set_vring_num)(struct vhost_device_ctx,
+ struct vhost_vring_state *);
+ int (*set_vring_addr)(struct vhost_device_ctx,
+ struct vhost_vring_addr *);
+ int (*set_vring_base)(struct vhost_device_ctx,
+ struct vhost_vring_state *);
+ int (*get_vring_base)(struct vhost_device_ctx,
+ uint32_t, struct vhost_vring_state *);
+
+ int (*set_vring_kick)(struct vhost_device_ctx,
+ struct vhost_vring_file *);
+ int (*set_vring_call)(struct vhost_device_ctx,
+ struct vhost_vring_file *);
+
+ int (*set_backend)(struct vhost_device_ctx, struct vhost_vring_file *);
+
+ int (*set_owner)(struct vhost_device_ctx);
+ int (*reset_owner)(struct vhost_device_ctx);
+};
+
+
+struct vhost_net_device_ops const *get_virtio_net_callbacks(void);
diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
new file mode 100644
index 0000000..8e3bf34
--- /dev/null
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -0,0 +1,316 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <linux/virtio_net.h>
+
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+#include <rte_virtio_net.h>
+
+#include "vhost-net-cdev.h"
+
+#define VHOST_MAX_PKT_BURST 64
+#define VHOST_MAX_MRG_PKT_BURST 64
+
+
+uint32_t
+rte_vhost_enqueue_burst(struct virtio_net *dev, uint16_t queue_id,
+ struct rte_mbuf **pkts, uint32_t count) {
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0, 0, 0, 0, 0, 0}, 0};
+ uint64_t buff_addr = 0;
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[VHOST_MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint32_t mergeable, mrg_count = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint16_t free_entries;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") %s()\n", dev->device_fh, __func__);
+ if (unlikely(queue_id != VIRTIO_RXQ)) {
+ LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
+ return 0;
+ }
+
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > VHOST_MAX_PKT_BURST) ? VHOST_MAX_PKT_BURST : count;
+ /*
+ * As many data cores may access available buffers, they need are
+ * reserved in the lockless way.
+ */
+ do {
+ res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ free_entries = (avail_idx - res_base_idx);
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (count == 0)
+ return 0;
+
+ res_end_idx = res_base_idx + count;
+ /* vq->last_used_idx_res is atomically updated. */
+ /*
+ * TODO: allow to disable reserving
+ * if no concurrency in application
+ */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res,
+ res_base_idx, res_end_idx);
+ /* If there is contention here and failed, try again. */
+ } while (unlikely(success == 0));
+ res_cur_idx = res_base_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
+ dev->device_fh,
+ res_cur_idx, res_end_idx);
+
+ /* Prefetch available ring to retrieve indexes. */
+ rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
+
+ /* Check if the VIRTIO_NET_F_MRG_RXBUF feature is enabled. */
+ mergeable = dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) &
+ (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (res_cur_idx != res_end_idx) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+
+ /* Convert from gpa to vva (vhost virtual addr) */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address */
+ rte_prefetch0((void *)(uintptr_t)buff_addr);
+
+ if (mergeable && (mrg_count != 0)) {
+ desc->len = packet_len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_hdr_addr = buff_addr;
+ packet_len = rte_pktmbuf_data_len(buff) +
+ vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data
+ * are placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_addr += vq->vhost_hlen;
+ desc->len = packet_len;
+ }
+ }
+
+ VHOST_PRINT_PACKET(dev, (uintptr_t)buff_addr,
+ rte_pktmbuf_data_len(buff), 0);
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id =
+ head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
+
+ /* Copy mbuf data to buffer */
+ /* TODO: fixme for sg mbuf and the case that desc couldn't hold
+ * the mbuf data */
+ rte_memcpy((void *)(uintptr_t)buff_addr,
+ (const void *)buff->pkt.data,
+ rte_pktmbuf_data_len(buff));
+
+ res_cur_idx++;
+ packet_success++;
+
+ if (!mergeable) {
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+ VHOST_PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr,
+ vq->vhost_hlen, 1);
+ } else {
+ mrg_count++;
+ if ((mrg_count == VHOST_MAX_MRG_PKT_BURST) ||
+ (res_cur_idx == res_end_idx)) {
+ virtio_hdr.num_buffers = mrg_count;
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") RX: num merge bufs %d\n",
+ dev->device_fh, virtio_hdr.num_buffers);
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr,
+ vq->vhost_hlen);
+ VHOST_PRINT_PACKET(dev,
+ (uintptr_t)buff_hdr_addr,
+ vq->vhost_hlen, 1);
+ mrg_count = 0;
+ }
+ }
+ if (res_cur_idx < res_end_idx) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ /* Wait until it's our turn to add our buffer to the used ring. */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ return count;
+}
+
+
+uint32_t
+rte_vhost_dequeue_burst(struct virtio_net *dev, uint16_t queue_id,
+ struct rte_mempool *mbuf_pool, struct rte_mbuf **pkts, uint32_t count)
+{
+ struct rte_mbuf *mbuf;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0;
+ uint32_t head[VHOST_MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+
+ if (unlikely(queue_id != VIRTIO_TXQ)) {
+ LOG_DEBUG(VHOST_DATA, "mq isn't supported in this version.\n");
+ return 0;
+ }
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ if (free_entries > count)
+ free_entries = count;
+ /* Limit to MAX_PKT_BURST. */
+ if (free_entries > VHOST_MAX_PKT_BURST)
+ free_entries = VHOST_MAX_PKT_BURST;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) &
+ (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)buff_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (packet_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) &
+ (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[packet_success];
+ vq->used->ring[used_idx].len = 0;
+
+ mbuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(mbuf == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return packet_success;
+ }
+ mbuf->pkt.data_len = desc->len;
+ mbuf->pkt.pkt_len = mbuf->pkt.data_len;
+
+ rte_memcpy((void *) mbuf->pkt.data,
+ (const void *) buff_addr, mbuf->pkt.data_len);
+
+ pkts[packet_success] = mbuf;
+
+ VHOST_PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ vq->last_used_idx++;
+ packet_success++;
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += packet_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return packet_success;
+}
diff --git a/lib/librte_vhost/virtio-net.c b/lib/librte_vhost/virtio-net.c
new file mode 100644
index 0000000..f1b807e
--- /dev/null
+++ b/lib/librte_vhost/virtio-net.c
@@ -0,0 +1,1113 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dirent.h>
+#include <fuse/cuse_lowlevel.h>
+#include <linux/vhost.h>
+#include <linux/virtio_net.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <stdlib.h>
+#include <sys/eventfd.h>
+#include <sys/ioctl.h>
+#include <sys/mman.h>
+#include <unistd.h>
+
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_memory.h>
+#include <rte_virtio_net.h>
+
+#include "vhost-net-cdev.h"
+#include "eventfd_link/eventfd_link.h"
+
+/**
+ * Device linked list structure for configuration.
+ */
+struct virtio_net_config_ll {
+ struct virtio_net dev; /* Virtio device. */
+ struct virtio_net_config_ll *next; /* Next entry on linked list. */
+};
+
+static const char eventfd_cdev[] = "/dev/eventfd-link";
+
+/* device ops to add/remove device to data core. */
+static struct virtio_net_device_ops const *notify_ops;
+/* Root address of the linked list in the configuration core. */
+static struct virtio_net_config_ll *ll_root;
+
+/* Features supported by this library. */
+#define VHOST_SUPPORTED_FEATURES (1ULL << VIRTIO_NET_F_MRG_RXBUF)
+static uint64_t VHOST_FEATURES = VHOST_SUPPORTED_FEATURES;
+
+/* Line size for reading maps file. */
+static const uint32_t BUFSIZE = PATH_MAX;
+
+/* Size of prot char array in procmap. */
+#define PROT_SZ 5
+
+/* Number of elements in procmap struct. */
+#define PROCMAP_SZ 8
+
+/* Structure containing information gathered from maps file. */
+struct procmap {
+ uint64_t va_start; /* Start virtual address in file. */
+ uint64_t len; /* Size of file. */
+ uint64_t pgoff; /* Not used. */
+ uint32_t maj; /* Not used. */
+ uint32_t min; /* Not used. */
+ uint32_t ino; /* Not used. */
+ char prot[PROT_SZ]; /* Not used. */
+ char fname[PATH_MAX]; /* File name. */
+};
+
+/**
+ * Converts QEMU virtual address to Vhost virtual address. This function is used
+ * to convert the ring addresses to our address space.
+ */
+static uint64_t
+qva_to_vva(struct virtio_net *dev, uint64_t qemu_va)
+{
+ struct virtio_memory_regions *region;
+ uint64_t vhost_va = 0;
+ uint32_t regionidx = 0;
+
+ /* Find the region where the address lives. */
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ region = &dev->mem->regions[regionidx];
+ if ((qemu_va >= region->userspace_address) &&
+ (qemu_va <= region->userspace_address +
+ region->memory_size)) {
+ vhost_va = dev->mem->mapped_address + qemu_va -
+ dev->mem->base_address;
+ break;
+ }
+ }
+ return vhost_va;
+}
+
+/**
+ * Locate the file containing QEMU's memory space and map it to our address space.
+ */
+static int
+host_memory_map(struct virtio_net *dev, struct virtio_memory *mem, pid_t pid,
+ uint64_t addr)
+{
+ struct dirent *dptr = NULL;
+ struct procmap procmap;
+ DIR *dp = NULL;
+ int fd;
+ int i;
+ char memfile[PATH_MAX];
+ char mapfile[PATH_MAX];
+ char procdir[PATH_MAX];
+ char resolved_path[PATH_MAX];
+ FILE *fmap;
+ void *map;
+ uint8_t found = 0;
+ char line[BUFSIZE];
+ char dlm[] = "- : ";
+ char *str, *sp, *in[PROCMAP_SZ];
+ char *end = NULL;
+
+ /* Path where mem files are located. */
+ snprintf(procdir, PATH_MAX, "/proc/%u/fd/", pid);
+ /* Maps file used to locate mem file. */
+ snprintf(mapfile, PATH_MAX, "/proc/%u/maps", pid);
+
+ fmap = fopen(mapfile, "r");
+ if (fmap == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to open maps file for pid %d\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Read through maps file until we find out base_address. */
+ while (fgets(line, BUFSIZE, fmap) != 0) {
+ str = line;
+ errno = 0;
+ /* Split line in to fields. */
+ for (i = 0; i < PROCMAP_SZ; i++) {
+ in[i] = strtok_r(str, &dlm[i], &sp);
+ if ((in[i] == NULL) || (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+ str = NULL;
+ }
+
+ /* Convert/Copy each field as needed. */
+ procmap.va_start = strtoull(in[0], &end, 16);
+ if ((in[0] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.len = strtoull(in[1], &end, 16);
+ if ((in[1] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.pgoff = strtoull(in[3], &end, 16);
+ if ((in[3] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.maj = strtoul(in[4], &end, 16);
+ if ((in[4] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.min = strtoul(in[5], &end, 16);
+ if ((in[5] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ procmap.ino = strtoul(in[6], &end, 16);
+ if ((in[6] == '\0') || (end == NULL) || (*end != '\0') ||
+ (errno != 0)) {
+ fclose(fmap);
+ return -1;
+ }
+
+ memcpy(&procmap.prot, in[2], PROT_SZ);
+ memcpy(&procmap.fname, in[7], PATH_MAX);
+
+ if (procmap.va_start == addr) {
+ procmap.len = procmap.len - procmap.va_start;
+ found = 1;
+ break;
+ }
+ }
+ fclose(fmap);
+
+ if (!found) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find memory file in pid %d maps file\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+
+ /* Find the guest memory file among the process fds. */
+ dp = opendir(procdir);
+ if (dp == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Cannot open pid %d process directory\n",
+ dev->device_fh, pid);
+ return -1;
+
+ }
+
+ found = 0;
+
+ /* Read the fd directory contents. */
+ while (NULL != (dptr = readdir(dp))) {
+ snprintf(memfile, PATH_MAX, "/proc/%u/fd/%s", pid,
+ dptr->d_name);
+ realpath(memfile, resolved_path);
+ if (resolved_path == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to resolve fd directory\n",
+ dev->device_fh);
+ closedir(dp);
+ return -1;
+ }
+ if (strncmp(resolved_path, procmap.fname,
+ strnlen(procmap.fname, PATH_MAX)) == 0) {
+ found = 1;
+ break;
+ }
+ }
+
+ closedir(dp);
+
+ if (found == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find memory file for pid %d\n",
+ dev->device_fh, pid);
+ return -1;
+ }
+ /* Open the shared memory file and map the memory into this process. */
+ fd = open(memfile, O_RDWR);
+
+ if (fd == -1) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to open %s for pid %d\n",
+ dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ map = mmap(0, (size_t)procmap.len, PROT_READ|PROT_WRITE ,
+ MAP_POPULATE|MAP_SHARED, fd, 0);
+ close(fd);
+
+ if (map == MAP_FAILED) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Error mapping the file %s for pid %d\n",
+ dev->device_fh, memfile, pid);
+ return -1;
+ }
+
+ /* Store the memory address and size in the device data structure */
+ mem->mapped_address = (uint64_t)(uintptr_t)map;
+ mem->mapped_size = procmap.len;
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") Mem File: %s->%s - Size: %llu - VA: %p\n",
+ dev->device_fh, memfile, resolved_path,
+ (long long unsigned)mem->mapped_size, map);
+
+ return 0;
+}
+
+/**
+ * Initialise all variables in device structure.
+ */
+static void
+init_device(struct virtio_net *dev)
+{
+ uint64_t vq_offset;
+
+ /* Virtqueues have already been malloced so we don't want to set them
+ * to NULL. */
+ vq_offset = offsetof(struct virtio_net, mem);
+
+ /* Set everything to 0. */
+ memset((void *)(uintptr_t)((uint64_t)(uintptr_t)dev + vq_offset), 0,
+ (sizeof(struct virtio_net) - (size_t)vq_offset));
+ memset(dev->virtqueue[VIRTIO_RXQ], 0, sizeof(struct vhost_virtqueue));
+ memset(dev->virtqueue[VIRTIO_TXQ], 0, sizeof(struct vhost_virtqueue));
+
+ /* Backends are set to -1 indicating an inactive device. */
+ dev->virtqueue[VIRTIO_RXQ]->backend = VIRTIO_DEV_STOPPED;
+ dev->virtqueue[VIRTIO_TXQ]->backend = VIRTIO_DEV_STOPPED;
+}
+
+/**
+ * Unmap any memory, close any file descriptors and free any memory owned by a device.
+ */
+static void
+cleanup_device(struct virtio_net *dev)
+{
+ /* Unmap QEMU memory file if mapped. */
+ if (dev->mem) {
+ munmap((void *)(uintptr_t)dev->mem->mapped_address,
+ (size_t)dev->mem->mapped_size);
+ free(dev->mem);
+ }
+
+ /* Close any event notifiers opened by device. */
+ if (dev->virtqueue[VIRTIO_RXQ]->callfd)
+ close((int)dev->virtqueue[VIRTIO_RXQ]->callfd);
+ if (dev->virtqueue[VIRTIO_RXQ]->kickfd)
+ close((int)dev->virtqueue[VIRTIO_RXQ]->kickfd);
+ if (dev->virtqueue[VIRTIO_TXQ]->callfd)
+ close((int)dev->virtqueue[VIRTIO_TXQ]->callfd);
+ if (dev->virtqueue[VIRTIO_TXQ]->kickfd)
+ close((int)dev->virtqueue[VIRTIO_TXQ]->kickfd);
+}
+
+/**
+ * Release virtqueues and device memory.
+ */
+static void
+free_device(struct virtio_net_config_ll *ll_dev)
+{
+ /* Free any malloc'd memory */
+ free(ll_dev->dev.virtqueue[VIRTIO_RXQ]);
+ free(ll_dev->dev.virtqueue[VIRTIO_TXQ]);
+ free(ll_dev);
+}
+
+/**
+ * Retrieves an entry from the devices configuration linked list.
+ */
+static struct virtio_net_config_ll *
+get_config_ll_entry(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev = ll_root;
+
+ /* Loop through linked list until the device_fh is found. */
+ while (ll_dev != NULL) {
+ if (ll_dev->dev.device_fh == ctx.fh)
+ return ll_dev;
+ ll_dev = ll_dev->next;
+ }
+
+ return NULL;
+}
+
+/**
+ * Searches the configuration core linked list and retrieves the device if it exists.
+ */
+static struct virtio_net *
+get_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev;
+
+ ll_dev = get_config_ll_entry(ctx);
+
+ /* If a matching entry is found in the linked list, return the device
+ * in that entry. */
+ if (ll_dev)
+ return &ll_dev->dev;
+
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Device not found in linked list.\n", ctx.fh);
+ return NULL;
+}
+
+/**
+ * Add entry containing a device to the device configuration linked list.
+ */
+static void
+add_config_ll_entry(struct virtio_net_config_ll *new_ll_dev)
+{
+ struct virtio_net_config_ll *ll_dev = ll_root;
+
+ /* If ll_dev == NULL then this is the first device so go to else */
+ if (ll_dev) {
+ /* If the 1st device_fh != 0 then we insert our device here. */
+ if (ll_dev->dev.device_fh != 0) {
+ new_ll_dev->dev.device_fh = 0;
+ new_ll_dev->next = ll_dev;
+ ll_root = new_ll_dev;
+ } else {
+ /* Increment through the ll until we find un unused
+ * device_fh. Insert the device at that entry*/
+ while ((ll_dev->next != NULL) &&
+ (ll_dev->dev.device_fh ==
+ (ll_dev->next->dev.device_fh - 1)))
+ ll_dev = ll_dev->next;
+
+ new_ll_dev->dev.device_fh = ll_dev->dev.device_fh + 1;
+ new_ll_dev->next = ll_dev->next;
+ ll_dev->next = new_ll_dev;
+ }
+ } else {
+ ll_root = new_ll_dev;
+ ll_root->dev.device_fh = 0;
+ }
+
+}
+
+/**
+ * Remove an entry from the device configuration linked list.
+ */
+static struct virtio_net_config_ll *
+rm_config_ll_entry(struct virtio_net_config_ll *ll_dev,
+ struct virtio_net_config_ll *ll_dev_last)
+{
+ /* First remove the device and then clean it up. */
+ if (ll_dev == ll_root) {
+ ll_root = ll_dev->next;
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ return ll_root;
+ } else {
+ if (likely(ll_dev_last != NULL)) {
+ ll_dev_last->next = ll_dev->next;
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ return ll_dev_last->next;
+ } else {
+ cleanup_device(&ll_dev->dev);
+ free_device(ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "Remove entry from config_ll failed\n");
+ return NULL;
+ }
+ }
+}
+
+
+/**
+ * Function is called from the CUSE open function. The device structure is
+ * initialised and a new entry is added to the device configuration linked
+ * list.
+ */
+static int
+new_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *new_ll_dev;
+ struct vhost_virtqueue *virtqueue_rx, *virtqueue_tx;
+
+ /* Setup device and virtqueues. */
+ new_ll_dev = malloc(sizeof(struct virtio_net_config_ll));
+ if (new_ll_dev == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to allocate memory for dev.\n",
+ ctx.fh);
+ return -1;
+ }
+
+ virtqueue_rx = malloc(sizeof(struct vhost_virtqueue));
+ if (virtqueue_rx == NULL) {
+ free(new_ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to allocate memory for rxq.\n",
+ ctx.fh);
+ return -1;
+ }
+
+ virtqueue_tx = malloc(sizeof(struct vhost_virtqueue));
+ if (virtqueue_tx == NULL) {
+ free(virtqueue_rx);
+ free(new_ll_dev);
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to allocate memory for txq.\n",
+ ctx.fh);
+ return -1;
+ }
+
+ new_ll_dev->dev.virtqueue[VIRTIO_RXQ] = virtqueue_rx;
+ new_ll_dev->dev.virtqueue[VIRTIO_TXQ] = virtqueue_tx;
+
+ /* Initialise device and virtqueues. */
+ init_device(&new_ll_dev->dev);
+
+ new_ll_dev->next = NULL;
+
+ /* Add entry to device configuration linked list. */
+ add_config_ll_entry(new_ll_dev);
+
+ return new_ll_dev->dev.device_fh;
+}
+
+/**
+ * Function is called from the CUSE release function. This function will cleanup
+ * the device and remove it from device configuration linked list.
+ */
+static void
+destroy_device(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev_cur_ctx, *ll_dev_last = NULL;
+ struct virtio_net_config_ll *ll_dev_cur = ll_root;
+
+ /* Find the linked list entry for the device to be removed. */
+ ll_dev_cur_ctx = get_config_ll_entry(ctx);
+ while (ll_dev_cur != NULL) {
+ /* If the device is found or a device that doesn't exist is
+ * found then it is removed. */
+ if (ll_dev_cur == ll_dev_cur_ctx) {
+ /*
+ * If the device is running on a data core then call
+ * the function to remove it from the data core.
+ */
+ if ((ll_dev_cur->dev.flags & VIRTIO_DEV_RUNNING))
+ notify_ops->destroy_device(&(ll_dev_cur->dev));
+ ll_dev_cur =
+ rm_config_ll_entry(ll_dev_cur, ll_dev_last);
+ /*TODO return here? */
+ } else {
+ ll_dev_last = ll_dev_cur;
+ ll_dev_cur = ll_dev_cur->next;
+ }
+ }
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_OWNER
+ * This function just returns success at the moment unless the device hasn't
+ * been initialised.
+ */
+static int
+set_owner(struct vhost_device_ctx ctx)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_RESET_OWNER
+ */
+static int
+reset_owner(struct vhost_device_ctx ctx)
+{
+ struct virtio_net_config_ll *ll_dev;
+
+ ll_dev = get_config_ll_entry(ctx);
+
+ cleanup_device(&ll_dev->dev);
+ init_device(&ll_dev->dev);
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_GET_FEATURES
+ * The features that we support are requested.
+ */
+static int
+get_features(struct vhost_device_ctx ctx, uint64_t *pu)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /* Send our supported features. */
+ *pu = VHOST_FEATURES;
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_FEATURES
+ * We receive the negotiated set of features supported by us and the virtio
+ * device.
+ */
+static int
+set_features(struct vhost_device_ctx ctx, uint64_t *pu)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+ if (*pu & ~VHOST_FEATURES)
+ return -1;
+
+ /* Store the negotiated feature list for the device. */
+ dev->features = *pu;
+
+ /* Set the vhost_hlen depending on if VIRTIO_NET_F_MRG_RXBUF is set. */
+ if (dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF)) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") Mergeable RX buffers enabled\n", dev->device_fh);
+ dev->virtqueue[VIRTIO_RXQ]->vhost_hlen =
+ sizeof(struct virtio_net_hdr_mrg_rxbuf);
+ dev->virtqueue[VIRTIO_TXQ]->vhost_hlen =
+ sizeof(struct virtio_net_hdr_mrg_rxbuf);
+ } else {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") Mergeable RX buffers disabled\n",
+ dev->device_fh);
+ dev->virtqueue[VIRTIO_RXQ]->vhost_hlen =
+ sizeof(struct virtio_net_hdr);
+ dev->virtqueue[VIRTIO_TXQ]->vhost_hlen =
+ sizeof(struct virtio_net_hdr);
+ }
+ return 0;
+}
+
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_MEM_TABLE
+ * This function creates and populates the memory structure for the device.
+ * This includes storing offsets used to translate buffer addresses.
+ */
+static int
+set_mem_table(struct vhost_device_ctx ctx, const void *mem_regions_addr,
+ uint32_t nregions)
+{
+ struct virtio_net *dev;
+ struct vhost_memory_region *mem_regions;
+ struct virtio_memory *mem;
+ uint64_t size = offsetof(struct vhost_memory, regions);
+ uint32_t regionidx, valid_regions;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ if (dev->mem) {
+ munmap((void *)(uintptr_t)dev->mem->mapped_address,
+ (size_t)dev->mem->mapped_size);
+ free(dev->mem);
+ }
+
+ /* Malloc the memory structure depending on the number of regions. */
+ mem = calloc(1, sizeof(struct virtio_memory) +
+ (sizeof(struct virtio_memory_regions) * nregions));
+ if (mem == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to allocate memory for dev->mem.\n",
+ dev->device_fh);
+ return -1;
+ }
+
+ mem->nregions = nregions;
+
+ mem_regions = (void *)(uintptr_t)
+ ((uint64_t)(uintptr_t)mem_regions_addr + size);
+
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ /* Populate the region structure for each region. */
+ mem->regions[regionidx].guest_phys_address =
+ mem_regions[regionidx].guest_phys_addr;
+ mem->regions[regionidx].guest_phys_address_end =
+ mem->regions[regionidx].guest_phys_address +
+ mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].memory_size =
+ mem_regions[regionidx].memory_size;
+ mem->regions[regionidx].userspace_address =
+ mem_regions[regionidx].userspace_addr;
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") REGION: %u - GPA: %p - QEMU VA: %p - SIZE "
+ "(%"PRIu64")\n",
+ dev->device_fh, regionidx,
+ (void *)(uintptr_t)
+ mem->regions[regionidx].guest_phys_address,
+ (void *)(uintptr_t)
+ mem->regions[regionidx].userspace_address,
+ mem->regions[regionidx].memory_size);
+
+ /*set the base address mapping*/
+ if (mem->regions[regionidx].guest_phys_address == 0x0) {
+ mem->base_address =
+ mem->regions[regionidx].userspace_address;
+ /* Map VM memory file */
+ if (host_memory_map(dev, mem, ctx.pid,
+ mem->base_address) != 0) {
+ free(mem);
+ return -1;
+ }
+ }
+ }
+
+ /* Check that we have a valid base address. */
+ if (mem->base_address == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find base address of qemu memory "
+ "file.\n", dev->device_fh);
+ free(mem);
+ return -1;
+ }
+
+ /* Check if all of our regions have valid mappings. Usually one does
+ * not exist in the QEMU memory file. */
+ valid_regions = mem->nregions;
+ for (regionidx = 0; regionidx < mem->nregions; regionidx++) {
+ if ((mem->regions[regionidx].userspace_address <
+ mem->base_address) ||
+ (mem->regions[regionidx].userspace_address >
+ (mem->base_address + mem->mapped_size)))
+ valid_regions--;
+ }
+
+ /* If a region does not have a valid mapping we rebuild our memory
+ * struct to contain only valid entries. */
+ if (valid_regions != mem->nregions) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") Not all memory regions exist in the QEMU mem file."
+ "Re-populating mem structure\n",
+ dev->device_fh);
+
+ /* Re-populate the memory structure with only valid regions.
+ * Invalid regions are over-written with memmove. */
+ valid_regions = 0;
+
+ for (regionidx = mem->nregions; 0 != regionidx--;) {
+ if ((mem->regions[regionidx].userspace_address <
+ mem->base_address) ||
+ (mem->regions[regionidx].userspace_address >
+ (mem->base_address + mem->mapped_size))) {
+ memmove(&mem->regions[regionidx],
+ &mem->regions[regionidx + 1],
+ sizeof(struct virtio_memory_regions) *
+ valid_regions);
+ } else {
+ valid_regions++;
+ }
+ }
+ }
+ mem->nregions = valid_regions;
+ dev->mem = mem;
+
+ /*
+ * Calculate the address offset for each region. This offset is used to
+ * identify the vhost virtual address corresponding to a QEMU guest
+ * physical address.
+ */
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++)
+ dev->mem->regions[regionidx].address_offset =
+ dev->mem->regions[regionidx].userspace_address -
+ dev->mem->base_address + dev->mem->mapped_address -
+ dev->mem->regions[regionidx].guest_phys_address;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_VRING_NUM
+ * The virtio device sends us the size of the descriptor ring.
+ */
+static int
+set_vring_num(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ dev->virtqueue[state->index]->size = state->num;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_VRING_ADDR
+ * The virtio device sends us the desc, used and avail ring addresses. This
+ * function then converts these to our address space.
+ */
+static int
+set_vring_addr(struct vhost_device_ctx ctx, struct vhost_vring_addr *addr)
+{
+ struct virtio_net *dev;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /*
+ * addr->index refers to the queue index. The TX queue is 1, RX queue
+ * is 0.
+ */
+ vq = dev->virtqueue[addr->index];
+
+ /* The addresses are converted from QEMU virtual to Vhost virtual. */
+ vq->desc = (struct vring_desc *)(uintptr_t)
+ qva_to_vva(dev, addr->desc_user_addr);
+ if (vq->desc == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find descriptor ring address.\n",
+ dev->device_fh);
+ return -1;
+ }
+
+ vq->avail = (struct vring_avail *)(uintptr_t)
+ qva_to_vva(dev, addr->avail_user_addr);
+ if (vq->avail == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find available ring address.\n",
+ dev->device_fh);
+ return -1;
+ }
+
+ vq->used = (struct vring_used *)(uintptr_t)
+ qva_to_vva(dev, addr->used_user_addr);
+ if (vq->used == 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find used ring address.\n",
+ dev->device_fh);
+ return -1;
+ }
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address desc: %p\n",
+ dev->device_fh, vq->desc);
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address avail: %p\n",
+ dev->device_fh, vq->avail);
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") mapped address used: %p\n",
+ dev->device_fh, vq->used);
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_VRING_BASE
+ * The virtio device sends us the available ring last used index.
+ */
+static int
+set_vring_base(struct vhost_device_ctx ctx, struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ dev->virtqueue[state->index]->last_used_idx = state->num;
+ dev->virtqueue[state->index]->last_used_idx_res = state->num;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_GET_VRING_BASE
+ * We send the virtio device our available ring last used index.
+ */
+static int
+get_vring_base(struct vhost_device_ctx ctx, uint32_t index,
+ struct vhost_vring_state *state)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ state->index = index;
+ state->num = dev->virtqueue[state->index]->last_used_idx;
+
+ return 0;
+}
+
+/**
+ * This function uses the eventfd_link kernel module to
+ * copy an eventfd file descriptor provided by QEMU into our process.
+ */
+static int
+eventfd_copy(struct virtio_net *dev, struct eventfd_copy *eventfd_copy)
+{
+ int eventfd_link, ret;
+
+ /* Open the character device to the kernel module. */
+ eventfd_link = open(eventfd_cdev, O_RDWR);
+ if (eventfd_link < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") eventfd_link module is not loaded\n",
+ dev->device_fh);
+ return -1;
+ }
+
+ /* Call the IOCTL to copy the eventfd. */
+ ret = ioctl(eventfd_link, EVENTFD_COPY, eventfd_copy);
+ close(eventfd_link);
+
+ if (ret < 0) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") EVENTFD_COPY ioctl failed\n",
+ dev->device_fh);
+ return -1;
+ }
+
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_VRING_CALL
+ * The virtio device sends an eventfd to interrupt the guest. This fd gets
+ * copied in to our process space.
+ */
+static int
+set_vring_call(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_kick;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ /*
+ * file->index refers to the queue index. The TX queue is 1,
+ * RX queue is 0.
+ */
+ vq = dev->virtqueue[file->index];
+
+ if (vq->kickfd)
+ close((int)vq->kickfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->kickfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_kick.source_fd = vq->kickfd;
+ eventfd_kick.target_fd = file->fd;
+ eventfd_kick.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_kick))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_SET_VRING_KICK
+ * The virtio device sends an eventfd that it can use to notify us. This fd
+ * gets copied in to our process space.
+ */
+static int
+set_vring_kick(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+ struct eventfd_copy eventfd_call;
+ struct vhost_virtqueue *vq;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ vq = dev->virtqueue[file->index];
+
+ if (vq->callfd)
+ close((int)vq->callfd);
+
+ /* Populate the eventfd_copy structure and call eventfd_copy. */
+ vq->callfd = eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
+ eventfd_call.source_fd = vq->callfd;
+ eventfd_call.target_fd = file->fd;
+ eventfd_call.target_pid = ctx.pid;
+
+ if (eventfd_copy(dev, &eventfd_call))
+ return -1;
+
+ return 0;
+}
+
+/**
+ * Called from CUSE IOCTL: VHOST_NET_SET_BACKEND
+ * To complete device initialisation when the virtio driver is loaded we are
+ * provided with a valid fd for a tap device (not used by us). If this happens
+ * then we can add the device to a data core. When the virtio driver is removed
+ * we get fd=-1. At that point we remove the device from the data core. The
+ * device will still exist in the device configuration linked list.
+ */
+static int
+set_backend(struct vhost_device_ctx ctx, struct vhost_vring_file *file)
+{
+ struct virtio_net *dev;
+
+ dev = get_device(ctx);
+ if (dev == NULL)
+ return -1;
+
+ dev->virtqueue[file->index]->backend = file->fd;
+
+ /* If the device isn't already running and both backend fds are set
+ * we add the device.
+ */
+ if (!(dev->flags & VIRTIO_DEV_RUNNING)) {
+ if (((int)dev->virtqueue[VIRTIO_TXQ]->backend !=
+ VIRTIO_DEV_STOPPED) &&
+ ((int)dev->virtqueue[VIRTIO_RXQ]->backend !=
+ VIRTIO_DEV_STOPPED))
+ return notify_ops->new_device(dev);
+ /* Otherwise we remove it. */
+ } else
+ if (file->fd == VIRTIO_DEV_STOPPED)
+ notify_ops->destroy_device(dev);
+ return 0;
+}
+
+/**
+ * Function pointers are set for the device operations to allow CUSE to call functions
+ * when an IOCTL, device_add or device_release is received.
+ */
+static const struct vhost_net_device_ops vhost_device_ops = {
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+
+ .get_features = get_features,
+ .set_features = set_features,
+
+ .set_mem_table = set_mem_table,
+
+ .set_vring_num = set_vring_num,
+ .set_vring_addr = set_vring_addr,
+ .set_vring_base = set_vring_base,
+ .get_vring_base = get_vring_base,
+
+ .set_vring_kick = set_vring_kick,
+ .set_vring_call = set_vring_call,
+
+ .set_backend = set_backend,
+
+ .set_owner = set_owner,
+ .reset_owner = reset_owner,
+};
+
+/**
+ * Called by main to setup callbacks when registering CUSE device.
+ */
+struct vhost_net_device_ops const *
+get_virtio_net_callbacks(void)
+{
+ return &vhost_device_ops;
+}
+
+int rte_vhost_enable_guest_notification(struct virtio_net *dev,
+ uint16_t queue_id, int enable)
+{
+ if (enable) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "guest notification isn't supported.\n");
+ return -1;
+ }
+
+ dev->virtqueue[queue_id]->used->flags = enable ? 0 :
+ VRING_USED_F_NO_NOTIFY;
+ return 0;
+}
+
+uint64_t rte_vhost_feature_get(void)
+{
+ return VHOST_FEATURES;
+}
+
+int rte_vhost_feature_disable(uint64_t feature_mask)
+{
+ VHOST_FEATURES = VHOST_FEATURES & ~feature_mask;
+ return 0;
+}
+
+int rte_vhost_feature_enable(uint64_t feature_mask)
+{
+ if ((feature_mask & VHOST_SUPPORTED_FEATURES) == feature_mask) {
+ VHOST_FEATURES = VHOST_FEATURES | feature_mask;
+ return 0;
+ }
+ return -1;
+}
+
+
+/*
+ * Register ops so that we can add/remove device to data core.
+ */
+int
+rte_vhost_driver_callback_register(struct virtio_net_device_ops const * const ops)
+{
+ notify_ops = ops;
+
+ return 0;
+}
diff --git a/mk/rte.app.mk b/mk/rte.app.mk
index 34dff2a..285b65c 100644
--- a/mk/rte.app.mk
+++ b/mk/rte.app.mk
@@ -190,6 +190,11 @@ ifeq ($(CONFIG_RTE_LIBRTE_VIRTIO_PMD),y)
LDLIBS += -lrte_pmd_virtio_uio
endif
+ifeq ($(CONFIG_RTE_LIBRTE_VHOST), y)
+LDLIBS += -lrte_vhost
+LDLIBS += -lfuse
+endif
+
ifeq ($(CONFIG_RTE_LIBRTE_I40E_PMD),y)
LDLIBS += -lrte_pmd_i40e
endif
--
1.8.1.4
next prev parent reply other threads:[~2014-09-02 8:51 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-02 8:55 [dpdk-dev] [PATCH 0/3] Transform the vhost example to two parts: vhost library and example Huawei Xie
2014-09-02 8:55 ` [dpdk-dev] [PATCH 1/3] examples/vhost: remove vhost example Huawei Xie
2014-09-02 8:55 ` Huawei Xie [this message]
2014-09-03 3:38 ` [dpdk-dev] [PATCH 2/3] lib/librte_vhost: vhost library support to facilitate integration with DPDK accelerated vswitch Tetsuya.Mukawa
2014-09-03 5:39 ` Xie, Huawei
2014-09-03 6:01 ` Stephen Hemminger
2014-09-03 9:43 ` Ananyev, Konstantin
2014-09-03 6:43 ` Tetsuya.Mukawa
2014-09-02 8:55 ` [dpdk-dev] [PATCH 3/3] examples/vhost: vhost example based on vhost library Huawei Xie
2014-09-02 9:38 ` [dpdk-dev] [PATCH 0/3] Transform the vhost example to two parts: vhost library and example Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1409648131-4301-3-git-send-email-huawei.xie@intel.com \
--to=huawei.xie@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).