From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v3 4/8]librte_ether:add a common filter API
Date: Fri, 12 Sep 2014 14:33:55 +0800 [thread overview]
Message-ID: <1410503639-10753-5-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1410503639-10753-1-git-send-email-jijiang.liu@intel.com>
Introduce a new filter framewok in librte_ether. As to the implemetation discussion, please refer to
http://dpdk.org/ml/archives/dev/2014-September/005179.html, and VxLAN tunnel filter implementation is based on
it.
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
---
lib/librte_ether/Makefile | 1 +
lib/librte_ether/rte_eth_ctrl.h | 152 +++++++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.c | 32 ++++++++
lib/librte_ether/rte_ethdev.h | 56 +++++++++++---
4 files changed, 229 insertions(+), 12 deletions(-)
create mode 100644 lib/librte_ether/rte_eth_ctrl.h
diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile
index b310f8b..a461c31 100644
--- a/lib/librte_ether/Makefile
+++ b/lib/librte_ether/Makefile
@@ -46,6 +46,7 @@ SRCS-y += rte_ethdev.c
#
SYMLINK-y-include += rte_ether.h
SYMLINK-y-include += rte_ethdev.h
+SYMLINK-y-include += rte_eth_ctrl.h
# this lib depends upon:
DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_ring lib/librte_mbuf
diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
new file mode 100644
index 0000000..3e2bf45
--- /dev/null
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -0,0 +1,152 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_CTRL_H_
+#define _RTE_ETH_CTRL_H_
+
+/**
+ * @file
+ *
+ * Ethernet device features and related data structures used
+ * by control APIs should be defined in this file.
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Feature filter types
+ */
+enum rte_filter_type {
+ RTE_ETH_FILTER_NONE = 0,
+ RTE_ETH_FILTER_RSS,
+ RTE_ETH_FILTER_FDIR,
+ RTE_ETH_FILTER_TUNNEL,
+ RTE_ETH_FILTER_MAX,
+};
+
+/**
+ * all generic operations to filters
+ */
+enum rte_filter_op {
+ RTE_ETH_FILTER_OP_NONE = 0,
+ /** used to check whether the type filter is supported */
+ RTE_ETH_FILTER_OP_ADD, /**< add filter entry */
+ RTE_ETH_FILTER_OP_UPDATE, /**< update filter entry */
+ RTE_ETH_FILTER_OP_DELETE, /**< delete filter entry */
+ RTE_ETH_FILTER_OP_GET, /**< get filter entry */
+ RTE_ETH_FILTER_OP_SET, /**< configurations */
+ RTE_ETH_FILTER_OP_GET_INFO,
+ /** get information of filter, such as status or statistics */
+ RTE_ETH_FILTER_OP_MAX,
+};
+
+/**** TUNNEL FILTER DATA DEFINATION *** */
+
+#define ETH_TUNNEL_FILTER_OMAC 0x01
+#define ETH_TUNNEL_FILTER_OIP 0x02
+#define ETH_TUNNEL_FILTER_TENID 0x04
+#define ETH_TUNNEL_FILTER_IMAC 0x08
+#define ETH_TUNNEL_FILTER_IVLAN 0x10
+#define ETH_TUNNEL_FILTER_IIP 0x20
+
+#define RTE_TUNNEL_FLAGS_TO_QUEUE 1
+
+/*
+ * Tunneled filter type
+ */
+enum rte_tunnel_filter_type {
+ RTE_TUNNEL_FILTER_TYPE_NONE = 0,
+ RTE_TUNNEL_FILTER_OIP = ETH_TUNNEL_FILTER_OIP,
+ RTE_TUNNEL_FILTER_IMAC_IVLAN =
+ ETH_TUNNEL_FILTER_IMAC | ETH_TUNNEL_FILTER_IVLAN,
+ RTE_TUNNEL_FILTER_IMAC_IVLAN_TENID =
+ ETH_TUNNEL_FILTER_IMAC | ETH_TUNNEL_FILTER_IVLAN |
+ ETH_TUNNEL_FILTER_TENID,
+ RTE_TUNNEL_FILTER_IMAC_TENID =
+ ETH_TUNNEL_FILTER_IMAC | ETH_TUNNEL_FILTER_TENID,
+ RTE_TUNNEL_FILTER_IMAC = ETH_TUNNEL_FILTER_IMAC,
+ RTE_TUNNEL_FILTER_OMAC_TENID_IMAC =
+ ETH_TUNNEL_FILTER_OMAC | ETH_TUNNEL_FILTER_TENID |
+ ETH_TUNNEL_FILTER_IMAC,
+ RTE_TUNNEL_FILTER_IIP = ETH_TUNNEL_FILTER_IIP,
+ RTE_TUNNEL_FILTER_TYPE_MAX,
+};
+
+/**
+ * Select IPv4 or IPv6 for tunnel filters.
+ */
+enum rte_tunnel_iptype {
+ RTE_TUNNEL_IPTYPE_IPV4 = 0, /**< IPv4. */
+ RTE_TUNNEL_IPTYPE_IPV6, /**< IPv6. */
+};
+
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+ RTE_TUNNEL_TYPE_NONE = 0,
+ RTE_TUNNEL_TYPE_VXLAN,
+ RTE_TUNNEL_TYPE_GENEVE,
+ RTE_TUNNEL_TYPE_TEREDO,
+ RTE_TUNNEL_TYPE_NVGRE,
+ RTE_TUNNEL_TYPE_MAX,
+};
+
+/**
+ * Tunnel Packet filter configuration.
+ */
+struct rte_eth_tunnel_filter_conf {
+ struct ether_addr *outer_mac; /**< Outer MAC address fiter. */
+ struct ether_addr *inner_mac; /**< Inner MAC address fiter. */
+ uint16_t inner_vlan; /**< Inner VLAN fiter. */
+ enum rte_tunnel_iptype ip_type; /**< IP address type. */
+ union {
+ uint32_t ipv4_addr; /**< IPv4 source address to match. */
+ uint32_t ipv6_addr[4]; /**< IPv6 source address to match. */
+ } ip_addr; /**< IPv4/IPv6 source address to match (union of above). */
+
+ uint8_t filter_type; /**< Filter type. */
+ uint8_t to_queue; /**< Use MAC and VLAN to point to a queue. */
+ enum rte_eth_tunnel_type tunnel_type; /**< Tunnel Type. */
+ uint32_t tenant_id; /** < Tenant number. */
+ uint16_t queue_id; /** < queue number. */
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETH_CTRL_H_ */
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 325edb1..e5b24f5 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3065,3 +3065,35 @@ rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
return (*dev->dev_ops->get_flex_filter)(dev, index, filter,
rx_queue);
}
+
+int
+rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+ return (*dev->dev_ops->filter_ctrl)(dev, filter_type,
+ RTE_ETH_FILTER_OP_NONE, NULL);
+}
+
+int
+rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+ return (*dev->dev_ops->filter_ctrl)(dev, filter_type, filter_op, arg);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 74ac313..156d05b 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -177,6 +177,7 @@ extern "C" {
#include <rte_pci.h>
#include <rte_mbuf.h>
#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
/**
* A structure used to retrieve statistics for an Ethernet port.
@@ -716,18 +717,6 @@ struct rte_eth_udp_tunnel {
};
/**
- * Tunneled type.
- */
-enum rte_eth_tunnel_type {
- RTE_TUNNEL_TYPE_NONE = 0,
- RTE_TUNNEL_TYPE_VXLAN,
- RTE_TUNNEL_TYPE_GENEVE,
- RTE_TUNNEL_TYPE_TEREDO,
- RTE_TUNNEL_TYPE_NVGRE,
- RTE_TUNNEL_TYPE_MAX,
-};
-
-/**
* Possible l4type of FDIR filters.
*/
enum rte_l4type {
@@ -1393,6 +1382,12 @@ typedef int (*eth_get_flex_filter_t)(struct rte_eth_dev *dev,
uint16_t *rx_queue);
/**< @internal Get a flex filter rule on an Ethernet device */
+typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg);
+/**< @internal Take operations to assigned filter type on an Ethernet device */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
@@ -1501,6 +1496,7 @@ struct eth_dev_ops {
eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
+ eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
};
/**
@@ -3633,6 +3629,42 @@ int rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index);
int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
struct rte_flex_filter *filter, uint16_t *rx_queue);
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_filter.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * filter type.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_filter.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * filter type.
+ * @param filter_op
+ * The operation taken to assigned filter.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
+
#ifdef __cplusplus
}
#endif
--
1.7.7.6
next prev parent reply other threads:[~2014-09-12 6:28 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-12 6:33 [dpdk-dev] [PATCH v3 0/8]Support VxLAN on Fortville Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 1/8]i40e:support VxLAN packet identification in librte_ether Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 2/8]i40e:support VxLAN packet identification in librte_pmd_i40e Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 3/8]app/test-pmd:test VxLAN packet identification Jijiang Liu
2014-09-12 6:33 ` Jijiang Liu [this message]
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 5/8]i40e:implement API of VxLAN packet filter in librte_pmd_i40e Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 6/8]app/testpmd:test VxLAN packet filter API Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 7/8]i40e:support VxLAN Tx checksum offload Jijiang Liu
2014-09-12 6:33 ` [dpdk-dev] [PATCH v3 8/8]app/testpmd:test " Jijiang Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1410503639-10753-5-git-send-email-jijiang.liu@intel.com \
--to=jijiang.liu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).