From: David Marchand <david.marchand@6wind.com> To: dev@dpdk.org Subject: [dpdk-dev] [PATCH v3 00/20] cleanup logs in main PMDs Date: Wed, 17 Sep 2014 15:46:32 +0200 Message-ID: <1410961612-8571-1-git-send-email-david.marchand@6wind.com> (raw) Here is a patchset that reworks the log macro in e1000, ixgbe and i40e PMDs. The idea behind this is to make it easier to debug some init failures and to be sure of the datapath selected in these PMDs (rx / tx handlers selection). The PMDs changes involve adding more debug messages in the default build. A new eal option has been added to set the default log level, so that you can render the eal a little less noisy. I did not change the default log level for now, as some eal log messages are marked as DEBUG while being interesting (from my point of view). I suppose we can change the default log level later once the eal has been cleaned up. Changes since v2: - just a respin with Jay comments in mind * don't introduce \n in one commit then remove them * indent only the impacted parts before removing \n (so split previous patches) * remove some "" garbage Changes since v1: - continue clean up by always using PMD_*_LOG when logging something in PMD (i.e. no more printf, RTE_LOG, DEBUGOUT) - introduce PMD_DRV_LOG_RAW macro for use by shared driver code - adopt 'second approach': no more \n in PMD_*_LOG callers. This means that we will enforce a 'no \n' policy in logs for PMD. -- David Marchand David Marchand (20): ixgbe: use the right debug macro ixgbe/base: add a raw macro for use by shared code ixgbe: indent logs sections ixgbe: clean log messages ixgbe: always log init messages ixgbe: add a message when forcing scatter mode ixgbe: add log messages when rx bulk mode is not usable i40e: use the right debug macro i40e/base: add a raw macro for use by shared code i40e: indent logs sections i40e: clean log messages i40e: always log init messages i40e: add log messages when rx bulk mode is not usable e1000: use the right debug macro e1000/base: add a raw macro for use by shared code e1000: indent logs sections e1000: clean log messages e1000: always log init messages e1000: add a message when forcing scatter mode eal: set log level from command line lib/librte_eal/bsdapp/eal/eal.c | 42 ++ .../bsdapp/eal/include/eal_internal_cfg.h | 1 + lib/librte_eal/linuxapp/eal/eal.c | 44 +- .../linuxapp/eal/include/eal_internal_cfg.h | 1 + lib/librte_pmd_e1000/e1000/e1000_osdep.h | 4 +- lib/librte_pmd_e1000/e1000_logs.h | 18 +- lib/librte_pmd_e1000/em_ethdev.c | 53 ++- lib/librte_pmd_e1000/em_rxtx.c | 122 +++--- lib/librte_pmd_e1000/igb_ethdev.c | 85 ++-- lib/librte_pmd_e1000/igb_pf.c | 5 +- lib/librte_pmd_e1000/igb_rxtx.c | 65 +-- lib/librte_pmd_i40e/i40e/i40e_osdep.h | 8 +- lib/librte_pmd_i40e/i40e_ethdev.c | 451 ++++++++++---------- lib/librte_pmd_i40e/i40e_ethdev_vf.c | 166 ++++--- lib/librte_pmd_i40e/i40e_logs.h | 16 +- lib/librte_pmd_i40e/i40e_pf.c | 79 ++-- lib/librte_pmd_i40e/i40e_rxtx.c | 201 +++++---- lib/librte_pmd_ixgbe/ixgbe/ixgbe_osdep.h | 4 +- lib/librte_pmd_ixgbe/ixgbe_82599_bypass.c | 14 +- lib/librte_pmd_ixgbe/ixgbe_bypass.c | 26 +- lib/librte_pmd_ixgbe/ixgbe_ethdev.c | 150 ++++--- lib/librte_pmd_ixgbe/ixgbe_fdir.c | 6 +- lib/librte_pmd_ixgbe/ixgbe_logs.h | 16 +- lib/librte_pmd_ixgbe/ixgbe_pf.c | 4 +- lib/librte_pmd_ixgbe/ixgbe_rxtx.c | 172 +++++--- 25 files changed, 954 insertions(+), 799 deletions(-) -- 1.7.10.4
next reply other threads:[~2014-09-17 13:41 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-09-17 13:46 David Marchand [this message] 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 01/20] ixgbe: use the right debug macro David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 02/20] ixgbe/base: add a raw macro for use by shared code David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 03/20] ixgbe: indent logs sections David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 04/20] ixgbe: clean log messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 05/20] ixgbe: always log init messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 06/20] ixgbe: add a message when forcing scatter mode David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 07/20] ixgbe: add log messages when rx bulk mode is not usable David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 08/20] i40e: use the right debug macro David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 09/20] i40e/base: add a raw macro for use by shared code David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 10/20] i40e: indent logs sections David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 11/20] i40e: clean log messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 12/20] i40e: always log init messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 13/20] i40e: add log messages when rx bulk mode is not usable David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 14/20] e1000: use the right debug macro David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 15/20] e1000/base: add a raw macro for use by shared code David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 16/20] e1000: indent logs sections David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 17/20] e1000: clean log messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 18/20] e1000: always log init messages David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 19/20] e1000: add a message when forcing scatter mode David Marchand 2014-09-17 13:46 ` [dpdk-dev] [PATCH v3 20/20] eal: set log level from command line David Marchand 2014-09-17 14:45 ` Neil Horman 2014-09-18 7:46 ` David Marchand 2014-09-18 10:27 ` Neil Horman 2014-09-19 7:52 ` [dpdk-dev] [PATCH v3 00/20] cleanup logs in main PMDs Thomas Monjalon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1410961612-8571-1-git-send-email-david.marchand@6wind.com \ --to=david.marchand@6wind.com \ --cc=dev@dpdk.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
DPDK patches and discussions This inbox may be cloned and mirrored by anyone: git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git # If you have public-inbox 1.1+ installed, you may # initialize and index your mirror using the following commands: public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \ dev@dpdk.org public-inbox-index dev Example config snippet for mirrors. Newsgroup available over NNTP: nntp://inbox.dpdk.org/inbox.dpdk.dev AGPL code for this site: git clone https://public-inbox.org/public-inbox.git