From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 1/4] lib/librte_ether: new filter APIs definition
Date: Thu, 25 Sep 2014 14:59:26 +0800 [thread overview]
Message-ID: <1411628369-29532-2-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1411628369-29532-1-git-send-email-jingjing.wu@intel.com>
Define new APIs to support configure multi-kind filters using same APIs
- rte_eth_dev_filter_supported
- rte_eth_dev_filter_ctrl
As to the implemetation discussion, please refer to http://dpdk.org/ml/archives/dev/2014-September/005179.html, and control packet filter implementation is based on it.
Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
lib/librte_ether/Makefile | 1 +
lib/librte_ether/rte_eth_ctrl.h | 78 +++++++++++++++++++++++++++++++++++++++++
lib/librte_ether/rte_ethdev.c | 32 +++++++++++++++++
lib/librte_ether/rte_ethdev.h | 44 +++++++++++++++++++++++
4 files changed, 155 insertions(+)
create mode 100644 lib/librte_ether/rte_eth_ctrl.h
diff --git a/lib/librte_ether/Makefile b/lib/librte_ether/Makefile
index b310f8b..a461c31 100644
--- a/lib/librte_ether/Makefile
+++ b/lib/librte_ether/Makefile
@@ -46,6 +46,7 @@ SRCS-y += rte_ethdev.c
#
SYMLINK-y-include += rte_ether.h
SYMLINK-y-include += rte_ethdev.h
+SYMLINK-y-include += rte_eth_ctrl.h
# this lib depends upon:
DEPDIRS-y += lib/librte_eal lib/librte_mempool lib/librte_ring lib/librte_mbuf
diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
new file mode 100644
index 0000000..34ab278
--- /dev/null
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -0,0 +1,78 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_ETH_CTRL_H_
+#define _RTE_ETH_CTRL_H_
+
+/**
+ * @file
+ *
+ * Ethernet device features and related data structures used
+ * by control APIs should be defined in this file.
+ *
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Feature filter types
+ */
+enum rte_filter_type {
+ RTE_ETH_FILTER_NONE = 0,
+ RTE_ETH_FILTER_RSS,
+ RTE_ETH_FILTER_FDIR,
+ RTE_ETH_FILTER_MAX,
+};
+
+/**
+ * All generic operations to filters
+ */
+enum rte_filter_op {
+ RTE_ETH_FILTER_OP_NONE = 0, /**< used to check whether the type filter is supported */
+ RTE_ETH_FILTER_OP_ADD, /**< add filter entry */
+ RTE_ETH_FILTER_OP_UPDATE, /**< update filter entry */
+ RTE_ETH_FILTER_OP_DELETE, /**< delete filter entry */
+ RTE_ETH_FILTER_OP_FLUSH, /**< flush all entries */
+ RTE_ETH_FILTER_OP_GET, /**< get filter entry */
+ RTE_ETH_FILTER_OP_SET, /**< configurations */
+ RTE_ETH_FILTER_OP_GET_INFO, /**< get information of filter, such as status or statistics */
+ RTE_ETH_FILTER_OP_MAX,
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTE_ETH_CTRL_H_ */
diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index b71b679..fdafb15 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -3139,3 +3139,35 @@ rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
return (*dev->dev_ops->get_flex_filter)(dev, index, filter,
rx_queue);
}
+
+int
+rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+ return (*dev->dev_ops->filter_ctrl)(dev, filter_type,
+ RTE_ETH_FILTER_OP_NONE, NULL);
+}
+
+int
+rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg)
+{
+ struct rte_eth_dev *dev;
+
+ if (port_id >= nb_ports) {
+ PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+ return -ENODEV;
+ }
+
+ dev = &rte_eth_devices[port_id];
+ FUNC_PTR_OR_ERR_RET(*dev->dev_ops->filter_ctrl, -ENOTSUP);
+ return (*dev->dev_ops->filter_ctrl)(dev, filter_type, filter_op, arg);
+}
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index 60b24c5..e2ea84a 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -177,6 +177,7 @@ extern "C" {
#include <rte_pci.h>
#include <rte_mbuf.h>
#include "rte_ether.h"
+#include "rte_eth_ctrl.h"
/**
* A structure used to retrieve statistics for an Ethernet port.
@@ -1383,6 +1384,12 @@ typedef int (*eth_get_flex_filter_t)(struct rte_eth_dev *dev,
uint16_t *rx_queue);
/**< @internal Get a flex filter rule on an Ethernet device */
+typedef int (*eth_filter_ctrl_t)(struct rte_eth_dev *dev,
+ enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op,
+ void *arg);
+/**< @internal Take operations to assigned filter type on an Ethernet device */
+
/**
* @internal A structure containing the functions exported by an Ethernet driver.
*/
@@ -1491,6 +1498,7 @@ struct eth_dev_ops {
eth_add_flex_filter_t add_flex_filter; /**< add flex filter. */
eth_remove_flex_filter_t remove_flex_filter; /**< remove flex filter. */
eth_get_flex_filter_t get_flex_filter; /**< get flex filter. */
+ eth_filter_ctrl_t filter_ctrl; /**< common filter control*/
};
/**
@@ -3613,6 +3621,42 @@ int rte_eth_dev_remove_flex_filter(uint8_t port_id, uint16_t index);
int rte_eth_dev_get_flex_filter(uint8_t port_id, uint16_t index,
struct rte_flex_filter *filter, uint16_t *rx_queue);
+/**
+ * Check whether the filter type is supported on an Ethernet device.
+ * All the supported filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * filter type.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support this filter type.
+ * - (-ENODEV) if *port_id* invalid.
+ */
+int rte_eth_dev_filter_supported(uint8_t port_id, enum rte_filter_type filter_type);
+
+/**
+ * Take operations to assigned filter type on an Ethernet device.
+ * All the supported operations and filter types are defined in 'rte_eth_ctrl.h'.
+ *
+ * @param port_id
+ * The port identifier of the Ethernet device.
+ * @param filter_type
+ * filter type.
+ * @param filter_op
+ * The operation taken to assigned filter.
+ * @param arg
+ * A pointer to arguments defined specifically for the operation.
+ * @return
+ * - (0) if successful.
+ * - (-ENOTSUP) if hardware doesn't support.
+ * - (-ENODEV) if *port_id* invalid.
+ * - others depends on the specific operations implementation.
+ */
+int rte_eth_dev_filter_ctrl(uint8_t port_id, enum rte_filter_type filter_type,
+ enum rte_filter_op filter_op, void *arg);
+
#ifdef __cplusplus
}
#endif
--
1.8.1.4
next prev parent reply other threads:[~2014-09-25 6:53 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 6:59 [dpdk-dev] [PATCH 0/4] support control packet filter on Fortville Jingjing Wu
2014-09-25 6:59 ` Jingjing Wu [this message]
2014-10-09 15:34 ` [dpdk-dev] [PATCH 1/4] lib/librte_ether: new filter APIs definition De Lara Guarch, Pablo
2014-10-10 1:19 ` Wu, Jingjing
2014-10-10 3:34 ` Wu, Jingjing
2014-10-10 7:28 ` De Lara Guarch, Pablo
2014-10-16 15:11 ` Thomas Monjalon
2014-09-25 6:59 ` [dpdk-dev] [PATCH 2/4] lib/librte_ether: define CTRL_PKT filter type and its structure Jingjing Wu
2014-09-25 6:59 ` [dpdk-dev] [PATCH 3/4] i40e: ctrl_pkt filter implementation in i40e pmd driver Jingjing Wu
2014-09-25 6:59 ` [dpdk-dev] [PATCH 4/4] app/test-pmd: add commands for control packet filter Jingjing Wu
2014-09-25 7:54 ` [dpdk-dev] [PATCH 0/4] support control packet filter on Fortville Zhang, Helin
2014-10-11 7:23 ` Chen, Jing D
2014-10-11 7:23 ` Liu, Jijiang
2014-10-11 7:53 ` Zhang, Helin
2014-10-22 8:19 ` [dpdk-dev] [PATCH v2 0/3] support control packet filter on fortville Jingjing Wu
2014-10-22 8:19 ` [dpdk-dev] [PATCH v2 1/3] ethdev: define ctrl_pkt filter type and its structure Jingjing Wu
2014-10-30 22:47 ` Thomas Monjalon
2014-10-31 7:05 ` Wu, Jingjing
2014-10-31 8:44 ` Thomas Monjalon
2014-11-13 5:44 ` Wu, Jingjing
2014-11-13 8:41 ` Thomas Monjalon
2014-11-13 9:00 ` Wu, Jingjing
2014-10-22 8:19 ` [dpdk-dev] [PATCH v2 2/3] i40e: ctrl_pkt filter implementation in i40e pmd driver Jingjing Wu
2014-10-22 8:19 ` [dpdk-dev] [PATCH v2 3/3] testpmd: Commands to test ctrl_pkt filter Jingjing Wu
2014-11-13 12:49 ` [dpdk-dev] [PATCH v3 0/2] support ethertype filter on fortville Jingjing Wu
2014-11-13 12:49 ` [dpdk-dev] [PATCH v3 1/2] ethdev: new structure of Ethertype Filter for filter_ctrl api Jingjing Wu
2014-11-27 5:21 ` Qiu, Michael
2014-11-13 12:49 ` [dpdk-dev] [PATCH v3 2/2] i40e: implement operation to add/delete an ethertype filter Jingjing Wu
2014-11-18 13:46 ` [dpdk-dev] [PATCH v3 0/2] support ethertype filter on fortville Liu, Jijiang
2014-11-26 22:24 ` Thomas Monjalon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411628369-29532-2-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).