From: Ouyang Changchun <changchun.ouyang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 16/18] ixgbe: New functionalities in IXGBE base code
Date: Thu, 25 Sep 2014 22:19:02 +0800 [thread overview]
Message-ID: <1411654744-9460-17-git-send-email-changchun.ouyang@intel.com> (raw)
In-Reply-To: <1411654744-9460-1-git-send-email-changchun.ouyang@intel.com>
This patch supports these functionalities in IXGBE base code:
Thermal sensor, DMA coalescing, EEE support, Source address pruning,
Anti-spoofing, Iosf buffer reading and writing, Malicious driver detection.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c | 4 +
lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c | 181 ++++++++++++++++++++++++++++++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h | 18 +++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c | 169 ++++++++++++++++++++++++++++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h | 12 ++
lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h | 152 ++++++++++++++++++++++++-
6 files changed, 531 insertions(+), 5 deletions(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
index 3e442f7..2b74374 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_82599.c
@@ -388,6 +388,10 @@ s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw)
/* Manageability interface */
mac->ops.set_fw_drv_ver = &ixgbe_set_fw_drv_ver_generic;
+ mac->ops.get_thermal_sensor_data =
+ &ixgbe_get_thermal_sensor_data_generic;
+ mac->ops.init_thermal_sensor_thresh =
+ &ixgbe_init_thermal_sensor_thresh_generic;
mac->ops.get_rtrup2tc = &ixgbe_dcb_get_rtrup2tc_generic;
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
index 8ed4b75..b3e89c5 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.c
@@ -1018,7 +1018,188 @@ s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
}
+/**
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ *
+ * Updates the temperatures in mac.thermal_sensor_data
+ **/
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.get_thermal_sensor_data, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ **/
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.init_thermal_sensor_thresh, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_config - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing. If enabling dmac, dmac is activated.
+ * When disabling dmac, dmac enable dmac bit is cleared.
+ **/
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_config, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_update_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Disables dmac, updates per TC settings, and then enable dmac.
+ **/
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_update_tcs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_dmac_config_tcs - Configure DMA Coalescing registers.
+ * @hw: pointer to hardware structure
+ *
+ * Configure DMA coalescing threshold per TC and set high priority bit for
+ * FCOE TC. The dmac enable bit must be cleared before configuring.
+ **/
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.dmac_config_tcs, (hw),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_setup_eee - Enable/disable EEE support
+ * @hw: pointer to the HW structure
+ * @enable_eee: boolean flag to enable EEE
+ *
+ * Enable/disable EEE based on enable_ee flag.
+ * Auto-negotiation must be started after BASE-T EEE bits in PHY register 7.3C
+ * are modified.
+ *
+ **/
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.setup_eee, (hw, enable_eee),
+ IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_set_source_address_pruning - Enable/Disable source address pruning
+ * @hw: pointer to hardware structure
+ * @enbale: enable or disable source address pruning
+ * @pool: Rx pool - Rx pool to toggle source address pruning
+ **/
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+ unsigned int pool)
+{
+ if (hw->mac.ops.set_source_address_pruning)
+ hw->mac.ops.set_source_address_pruning(hw, enable, pool);
+}
+
+/**
+ * ixgbe_set_ethertype_anti_spoofing - Enable/Disable Ethertype anti-spoofing
+ * @hw: pointer to hardware structure
+ * @enable: enable or disable switch for Ethertype anti-spoofing
+ * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing
+ *
+ **/
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable, int vf)
+{
+ if (hw->mac.ops.set_ethertype_anti_spoofing)
+ hw->mac.ops.set_ethertype_anti_spoofing(hw, enable, vf);
+}
+
+/**
+ * ixgbe_read_iosf_sb_reg - Read 32 bit PHY register
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit address of PHY register to read
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Pointer to read data from PHY register
+ *
+ * Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *phy_data)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.read_iosf_sb_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_write_iosf_sb_reg - Write 32 bit register through IOSF Sideband
+ * @hw: pointer to hardware structure
+ * @reg_addr: 32 bit PHY register to write
+ * @device_type: type of device you want to communicate with
+ * @phy_data: Data to write to the PHY register
+ *
+ * Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 phy_data)
+{
+ return ixgbe_call_func(hw, hw->mac.ops.write_iosf_sb_reg, (hw, reg_addr,
+ device_type, phy_data), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ * ixgbe_disable_mdd - Disable malicious driver detection
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_disable_mdd(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.disable_mdd)
+ hw->mac.ops.disable_mdd(hw);
+}
+
+/**
+ * ixgbe_enable_mdd - Enable malicious driver detection
+ * @hw: pointer to hardware structure
+ *
+ **/
+void ixgbe_enable_mdd(struct ixgbe_hw *hw)
+{
+ if (hw->mac.ops.enable_mdd)
+ hw->mac.ops.enable_mdd(hw);
+}
+/**
+ * ixgbe_mdd_event - Handle malicious driver detection event
+ * @hw: pointer to hardware structure
+ * @vf_bitmap: vf bitmap of malicious vfs
+ *
+ **/
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap)
+{
+ if (hw->mac.ops.mdd_event)
+ hw->mac.ops.mdd_event(hw, vf_bitmap);
+}
+
+/**
+ * ixgbe_restore_mdd_vf - Restore VF that was disabled during malicious driver
+ * detection event
+ * @hw: pointer to hardware structure
+ * @vf: vf index
+ *
+ **/
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf)
+{
+ if (hw->mac.ops.restore_mdd_vf)
+ hw->mac.ops.restore_mdd_vf(hw, vf);
+}
/**
* ixgbe_read_analog_reg8 - Reads 8 bit analog register
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h
index 88a31e8..c63664a 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_api.h
@@ -125,6 +125,8 @@ s32 ixgbe_set_vlvf(struct ixgbe_hw *hw, u32 vlan, u32 vind,
s32 ixgbe_fc_enable(struct ixgbe_hw *hw);
s32 ixgbe_set_fw_drv_ver(struct ixgbe_hw *hw, u8 maj, u8 min, u8 build,
u8 ver);
+s32 ixgbe_get_thermal_sensor_data(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh(struct ixgbe_hw *hw);
void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr);
s32 ixgbe_get_phy_firmware_version(struct ixgbe_hw *hw,
u16 *firmware_version);
@@ -177,6 +179,22 @@ void ixgbe_release_swfw_semaphore(struct ixgbe_hw *hw, u32 mask);
s32 ixgbe_get_wwn_prefix(struct ixgbe_hw *hw, u16 *wwnn_prefix,
u16 *wwpn_prefix);
s32 ixgbe_get_fcoe_boot_status(struct ixgbe_hw *hw, u16 *bs);
+s32 ixgbe_dmac_config(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_update_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_dmac_config_tcs(struct ixgbe_hw *hw);
+s32 ixgbe_setup_eee(struct ixgbe_hw *hw, bool enable_eee);
+void ixgbe_set_source_address_pruning(struct ixgbe_hw *hw, bool enable,
+ unsigned int vf);
+void ixgbe_set_ethertype_anti_spoofing(struct ixgbe_hw *hw, bool enable,
+ int vf);
+s32 ixgbe_read_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 *phy_data);
+s32 ixgbe_write_iosf_sb_reg(struct ixgbe_hw *hw, u32 reg_addr,
+ u32 device_type, u32 phy_data);
+void ixgbe_disable_mdd(struct ixgbe_hw *hw);
+void ixgbe_enable_mdd(struct ixgbe_hw *hw);
+void ixgbe_mdd_event(struct ixgbe_hw *hw, u32 *vf_bitmap);
+void ixgbe_restore_mdd_vf(struct ixgbe_hw *hw, u32 vf);
void ixgbe_disable_rx(struct ixgbe_hw *hw);
void ixgbe_enable_rx(struct ixgbe_hw *hw);
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
index 833aae9..a799b40 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.c
@@ -4605,6 +4605,175 @@ void ixgbe_clear_tx_pending(struct ixgbe_hw *hw)
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0);
}
+STATIC const u8 ixgbe_emc_temp_data[4] = {
+ IXGBE_EMC_INTERNAL_DATA,
+ IXGBE_EMC_DIODE1_DATA,
+ IXGBE_EMC_DIODE2_DATA,
+ IXGBE_EMC_DIODE3_DATA
+};
+STATIC const u8 ixgbe_emc_therm_limit[4] = {
+ IXGBE_EMC_INTERNAL_THERM_LIMIT,
+ IXGBE_EMC_DIODE1_THERM_LIMIT,
+ IXGBE_EMC_DIODE2_THERM_LIMIT,
+ IXGBE_EMC_DIODE3_THERM_LIMIT
+};
+
+/**
+ * ixgbe_get_thermal_sensor_data - Gathers thermal sensor data
+ * @hw: pointer to hardware structure
+ * @data: pointer to the thermal sensor data structure
+ *
+ * Returns the thermal sensor data structure
+ **/
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ DEBUGFUNC("ixgbe_get_thermal_sensor_data_generic");
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, IXGBE_ETS_CFG, &ets_offset);
+ if (status)
+ goto out;
+
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF)) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ status = hw->eeprom.ops.read(hw, ets_offset, &ets_cfg);
+ if (status)
+ goto out;
+
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC) {
+ status = IXGBE_NOT_IMPLEMENTED;
+ goto out;
+ }
+
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+ if (num_sensors > IXGBE_MAX_SENSORS)
+ num_sensors = IXGBE_MAX_SENSORS;
+
+ for (i = 0; i < num_sensors; i++) {
+ status = hw->eeprom.ops.read(hw, (ets_offset + 1 + i),
+ &ets_sensor);
+ if (status)
+ goto out;
+
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+
+ if (sensor_location != 0) {
+ status = hw->phy.ops.read_i2c_byte(hw,
+ ixgbe_emc_temp_data[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR,
+ &data->sensor[i].temp);
+ if (status)
+ goto out;
+ }
+ }
+out:
+ return status;
+}
+
+/**
+ * ixgbe_init_thermal_sensor_thresh_generic - Inits thermal sensor thresholds
+ * @hw: pointer to hardware structure
+ *
+ * Inits the thermal sensor thresholds according to the NVM map
+ * and save off the threshold and location values into mac.thermal_sensor_data
+ **/
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw)
+{
+ s32 status = IXGBE_SUCCESS;
+ u16 offset;
+ u16 ets_offset;
+ u16 ets_cfg;
+ u16 ets_sensor;
+ u8 low_thresh_delta;
+ u8 num_sensors;
+ u8 sensor_index;
+ u8 sensor_location;
+ u8 therm_limit;
+ u8 i;
+ struct ixgbe_thermal_sensor_data *data = &hw->mac.thermal_sensor_data;
+
+ DEBUGFUNC("ixgbe_init_thermal_sensor_thresh_generic");
+
+ memset(data, 0, sizeof(struct ixgbe_thermal_sensor_data));
+
+ /* Only support thermal sensors attached to 82599 physical port 0 */
+ if ((hw->mac.type != ixgbe_mac_82599EB) ||
+ (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ offset = IXGBE_ETS_CFG;
+ if (hw->eeprom.ops.read(hw, offset, &ets_offset))
+ goto eeprom_err;
+ if ((ets_offset == 0x0000) || (ets_offset == 0xFFFF))
+ return IXGBE_NOT_IMPLEMENTED;
+
+ offset = ets_offset;
+ if (hw->eeprom.ops.read(hw, offset, &ets_cfg))
+ goto eeprom_err;
+ if (((ets_cfg & IXGBE_ETS_TYPE_MASK) >> IXGBE_ETS_TYPE_SHIFT)
+ != IXGBE_ETS_TYPE_EMC)
+ return IXGBE_NOT_IMPLEMENTED;
+
+ low_thresh_delta = ((ets_cfg & IXGBE_ETS_LTHRES_DELTA_MASK) >>
+ IXGBE_ETS_LTHRES_DELTA_SHIFT);
+ num_sensors = (ets_cfg & IXGBE_ETS_NUM_SENSORS_MASK);
+
+ for (i = 0; i < num_sensors; i++) {
+ offset = ets_offset + 1 + i;
+ if (hw->eeprom.ops.read(hw, offset, &ets_sensor)) {
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed",
+ offset);
+ continue;
+ }
+ sensor_index = ((ets_sensor & IXGBE_ETS_DATA_INDEX_MASK) >>
+ IXGBE_ETS_DATA_INDEX_SHIFT);
+ sensor_location = ((ets_sensor & IXGBE_ETS_DATA_LOC_MASK) >>
+ IXGBE_ETS_DATA_LOC_SHIFT);
+ therm_limit = ets_sensor & IXGBE_ETS_DATA_HTHRESH_MASK;
+
+ hw->phy.ops.write_i2c_byte(hw,
+ ixgbe_emc_therm_limit[sensor_index],
+ IXGBE_I2C_THERMAL_SENSOR_ADDR, therm_limit);
+
+ if ((i < IXGBE_MAX_SENSORS) && (sensor_location != 0)) {
+ data->sensor[i].location = sensor_location;
+ data->sensor[i].caution_thresh = therm_limit;
+ data->sensor[i].max_op_thresh = therm_limit -
+ low_thresh_delta;
+ }
+ }
+ return status;
+
+eeprom_err:
+ ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE,
+ "eeprom read at offset %d failed", offset);
+ return IXGBE_NOT_IMPLEMENTED;
+}
+
/**
* ixgbe_dcb_get_rtrup2tc_generic - read rtrup2tc reg
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h
index 14f1fec..bfd41aa 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_common.h
@@ -165,6 +165,18 @@ extern s32 ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
extern void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
bool ixgbe_mng_enabled(struct ixgbe_hw *hw);
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+#define IXGBE_EMC_DIODE3_DATA 0x2A
+#define IXGBE_EMC_DIODE3_THERM_LIMIT 0x30
+
+s32 ixgbe_get_thermal_sensor_data_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_thermal_sensor_thresh_generic(struct ixgbe_hw *hw);
void ixgbe_disable_rx_generic(struct ixgbe_hw *hw);
void ixgbe_enable_rx_generic(struct ixgbe_hw *hw);
#endif /* IXGBE_COMMON */
diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
index 48f25d1..40ebed9 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_type.h
@@ -181,6 +181,26 @@ POSSIBILITY OF SUCH DAMAGE.
0x00000400 : 0x00000008)
#define IXGBE_I2C_CLOCK_STRETCHING_TIMEOUT 500
+#define IXGBE_I2C_THERMAL_SENSOR_ADDR 0xF8
+#define IXGBE_EMC_INTERNAL_DATA 0x00
+#define IXGBE_EMC_INTERNAL_THERM_LIMIT 0x20
+#define IXGBE_EMC_DIODE1_DATA 0x01
+#define IXGBE_EMC_DIODE1_THERM_LIMIT 0x19
+#define IXGBE_EMC_DIODE2_DATA 0x23
+#define IXGBE_EMC_DIODE2_THERM_LIMIT 0x1A
+
+#define IXGBE_MAX_SENSORS 3
+
+struct ixgbe_thermal_diode_data {
+ u8 location;
+ u8 temp;
+ u8 caution_thresh;
+ u8 max_op_thresh;
+};
+
+struct ixgbe_thermal_sensor_data {
+ struct ixgbe_thermal_diode_data sensor[IXGBE_MAX_SENSORS];
+};
/* Interrupt Registers */
#define IXGBE_EICR 0x00800
@@ -400,6 +420,8 @@ POSSIBILITY OF SUCH DAMAGE.
#define IXGBE_SPOOF_MACAS_MASK 0xFF
#define IXGBE_SPOOF_VLANAS_MASK 0xFF00
#define IXGBE_SPOOF_VLANAS_SHIFT 8
+#define IXGBE_SPOOF_ETHERTYPEAS 0xFF000000
+#define IXGBE_SPOOF_ETHERTYPEAS_SHIFT 16
#define IXGBE_PFVFSPOOF_REG_COUNT 8
/* 16 of these (0-15) */
#define IXGBE_DCA_TXCTRL(_i) (0x07200 + ((_i) * 4))
@@ -502,6 +524,56 @@ POSSIBILITY OF SUCH DAMAGE.
#define IXGBE_TDPT2TCCR(_i) (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
#define IXGBE_TDPT2TCSR(_i) (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+/* Power Management */
+/* DMA Coalescing configuration */
+struct ixgbe_dmac_config {
+ u16 watchdog_timer; /* usec units */
+ bool fcoe_en;
+ u32 link_speed;
+ u8 fcoe_tc;
+ u8 num_tcs;
+};
+
+/*
+ * DMA Coalescing threshold Rx PB TC[n] value in Kilobyte by link speed.
+ * DMACRXT = 10Gbps = 10,000 bits / usec = 1250 bytes / usec 70 * 1250 ==
+ * 87500 bytes [85KB]
+ */
+#define IXGBE_DMACRXT_10G 0x55
+#define IXGBE_DMACRXT_1G 0x09
+#define IXGBE_DMACRXT_100M 0x01
+
+/* DMA Coalescing registers */
+#define IXGBE_DMCMNGTH 0x15F20 /* Management Threshold */
+#define IXGBE_DMACR 0x02400 /* Control register */
+#define IXGBE_DMCTH(_i) (0x03300 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_DMCTLX 0x02404 /* Time to Lx request */
+/* DMA Coalescing register fields */
+#define IXGBE_DMCMNGTH_DMCMNGTH_MASK 0x000FFFF0 /* Mng Threshold mask */
+#define IXGBE_DMCMNGTH_DMCMNGTH_SHIFT 4 /* Management Threshold shift */
+#define IXGBE_DMACR_DMACWT_MASK 0x0000FFFF /* Watchdog Timer mask */
+#define IXGBE_DMACR_HIGH_PRI_TC_MASK 0x00FF0000
+#define IXGBE_DMACR_HIGH_PRI_TC_SHIFT 16
+#define IXGBE_DMACR_EN_MNG_IND 0x10000000 /* Enable Mng Indications */
+#define IXGBE_DMACR_LX_COAL_IND 0x40000000 /* Lx Coalescing indicate */
+#define IXGBE_DMACR_DMAC_EN 0x80000000 /* DMA Coalescing Enable */
+#define IXGBE_DMCTH_DMACRXT_MASK 0x000001FF /* Receive Threshold mask */
+#define IXGBE_DMCTLX_TTLX_MASK 0x00000FFF /* Time to Lx request mask */
+
+/* EEE registers */
+#define IXGBE_EEER 0x043A0 /* EEE register */
+#define IXGBE_EEE_STAT 0x04398 /* EEE Status */
+#define IXGBE_EEE_SU 0x04380 /* EEE Set up */
+#define IXGBE_TLPIC 0x041F4 /* EEE Tx LPI count */
+#define IXGBE_RLPIC 0x041F8 /* EEE Rx LPI count */
+
+/* EEE register fields */
+#define IXGBE_EEER_TX_LPI_EN 0x00010000 /* Enable EEE LPI TX path */
+#define IXGBE_EEER_RX_LPI_EN 0x00020000 /* Enable EEE LPI RX path */
+#define IXGBE_EEE_STAT_NEG 0x20000000 /* EEE support neg on link */
+#define IXGBE_EEE_RX_LPI_STATUS 0x40000000 /* RX Link in LPI status */
+#define IXGBE_EEE_TX_LPI_STATUS 0x80000000 /* TX Link in LPI status */
+
/* Security Control Registers */
@@ -1605,6 +1677,7 @@ enum {
#define IXGBE_MAX_ETQF_FILTERS 8
#define IXGBE_ETQF_FCOE 0x08000000 /* bit 27 */
#define IXGBE_ETQF_BCN 0x10000000 /* bit 28 */
+#define IXGBE_ETQF_TX_ANTISPOOF 0x20000000 /* bit 29 */
#define IXGBE_ETQF_1588 0x40000000 /* bit 30 */
#define IXGBE_ETQF_FILTER_EN 0x80000000 /* bit 31 */
#define IXGBE_ETQF_POOL_ENABLE (1 << 26) /* bit 26 */
@@ -1824,6 +1897,9 @@ enum {
#define IXGBE_GSSR_MAC_CSR_SM 0x0008
#define IXGBE_GSSR_FLASH_SM 0x0010
#define IXGBE_GSSR_SW_MNG_SM 0x0400
+#define IXGBE_GSSR_SHARED_I2C_SM 0x1806 /* Wait for both phys and both I2Cs */
+#define IXGBE_GSSR_I2C_MASK 0x1800
+#define IXGBE_GSSR_NVM_PHY_MASK 0xF
/* FW Status register bitmask */
#define IXGBE_FWSTS_FWRI 0x00000200 /* Firmware Reset Indication */
@@ -3160,15 +3236,24 @@ struct ixgbe_mac_operations {
/* Manageability interface */
s32 (*set_fw_drv_ver)(struct ixgbe_hw *, u8, u8, u8, u8);
+ s32 (*get_thermal_sensor_data)(struct ixgbe_hw *);
+ s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
s32 (*dmac_config)(struct ixgbe_hw *hw);
s32 (*dmac_update_tcs)(struct ixgbe_hw *hw);
s32 (*dmac_config_tcs)(struct ixgbe_hw *hw);
void (*get_rtrup2tc)(struct ixgbe_hw *hw, u8 *map);
- s32 (*set_eee)(struct ixgbe_hw *hw, bool enable_eee);
- s32 (*eee_linkup)(struct ixgbe_hw *hw, bool eee_enabled);
+ s32 (*setup_eee)(struct ixgbe_hw *hw, bool enable_eee);
void (*set_ethertype_anti_spoofing)(struct ixgbe_hw *, bool, int);
+ void (*set_source_address_pruning)(struct ixgbe_hw *, bool,
+ unsigned int);
void (*disable_rx)(struct ixgbe_hw *hw);
void (*enable_rx)(struct ixgbe_hw *hw);
+ s32 (*read_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32 *);
+ s32 (*write_iosf_sb_reg)(struct ixgbe_hw *, u32, u32, u32);
+ void (*disable_mdd)(struct ixgbe_hw *hw);
+ void (*enable_mdd)(struct ixgbe_hw *hw);
+ void (*mdd_event)(struct ixgbe_hw *hw, u32 *vf_bitmap);
+ void (*restore_mdd_vf)(struct ixgbe_hw *hw, u32 vf);
};
struct ixgbe_phy_operations {
@@ -3234,6 +3319,9 @@ struct ixgbe_mac_info {
bool orig_link_settings_stored;
bool autotry_restart;
u8 flags;
+ struct ixgbe_thermal_sensor_data thermal_sensor_data;
+ bool thermal_sensor_enabled;
+ struct ixgbe_dmac_config dmac_config;
bool set_lben;
};
@@ -3351,12 +3439,66 @@ struct ixgbe_hw {
#define IXGBE_ERR_OUT_OF_MEM -34
#define IXGBE_ERR_FEATURE_NOT_SUPPORTED -36
#define IXGBE_ERR_EEPROM_PROTECTED_REGION -37
+#define IXGBE_ERR_FDIR_CMD_INCOMPLETE -38
#define IXGBE_NOT_IMPLEMENTED 0x7FFFFFFF
-#ifdef IXGBE_OSDEP2
-#include "ixgbe_osdep2.h"
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL(P) ((P == 0) ? (0x4010) : (0x8010))
+#define IXGBE_KRM_LINK_CTRL_1(P) ((P == 0) ? (0x420C) : (0x820C))
+#define IXGBE_KRM_DSP_TXFFE_STATE_4(P) ((P == 0) ? (0x4634) : (0x8634))
+#define IXGBE_KRM_DSP_TXFFE_STATE_5(P) ((P == 0) ? (0x4638) : (0x8638))
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL(P) ((P == 0) ? (0x4B00) : (0x8B00))
+#define IXGBE_KRM_PMD_DFX_BURNIN(P) ((P == 0) ? (0x4E00) : (0x8E00))
+#define IXGBE_KRM_TX_COEFF_CTRL_1(P) ((P == 0) ? (0x5520) : (0x9520))
+#define IXGBE_KRM_RX_ANA_CTL(P) ((P == 0) ? (0x5A00) : (0x9A00))
+
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B (1 << 9)
+#define IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS (1 << 11)
+
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK (0x7 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G (2 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G (4 << 8)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_FEC_REQ (1 << 14)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_FEC (1 << 15)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX (1 << 16)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR (1 << 18)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KX (1 << 24)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_EEE_CAP_KR (1 << 26)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE (1 << 29)
+#define IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART (1 << 31)
+
+#define IXGBE_KRM_DSP_TXFFE_STATE_C0_EN (1 << 6)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN (1 << 15)
+#define IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN (1 << 16)
+
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL (1 << 4)
+#define IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS (1 << 2)
+
+#define IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK (0x3 << 16)
+
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN (1 << 1)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN (1 << 2)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN (1 << 3)
+#define IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN (1 << 31)
+
+#define IXGBE_SB_IOSF_INDIRECT_CTRL 0x00011144
+#define IXGBE_SB_IOSF_INDIRECT_DATA 0x00011148
+
+#define IXGBE_SB_IOSF_CTRL_ADDR_SHIFT 0
+#define IXGBE_SB_IOSF_CTRL_ADDR_MASK 0xFF
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT 18
+#define IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK \
+ (0x3 << IXGBE_SB_IOSF_CTRL_RESP_STAT_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT 20
+#define IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK \
+ (0xFF << IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT)
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT 28
+#define IXGBE_SB_IOSF_CTRL_TARGET_SELECT_MASK 0x7
+#define IXGBE_SB_IOSF_CTRL_BUSY_SHIFT 31
+#define IXGBE_SB_IOSF_CTRL_BUSY (1 << IXGBE_SB_IOSF_CTRL_BUSY_SHIFT)
+#define IXGBE_SB_IOSF_TARGET_KR_PHY 0
+#define IXGBE_SB_IOSF_TARGET_KX4_PHY 1
+#define IXGBE_SB_IOSF_TARGET_KX4_PCS 2
-#endif /* IXGBE_OSDEP2 */
#endif /* _IXGBE_TYPE_H_ */
--
1.8.4.2
next prev parent reply other threads:[~2014-09-25 14:13 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-25 14:18 [dpdk-dev] [PATCH 00/18] Update " Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 01/18] ixgbe: Update comments and fix some comments typo in " Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 02/18] ixgbe: Clean up IXGBE base codes Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 03/18] ixgbe: New function to check command complete in IXGBE base code Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 04/18] ixgbe: Support cloud mode " Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 05/18] ixgbe: eeprom checksum calculation return new value " Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 06/18] ixgbe: New argument in host interface command function Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 07/18] ixgbe: Extend mask for SWFW semaphore Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 08/18] ixgbe: New function to read and write I2C bytes Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 09/18] ixgbe: Support new device id 82599_QSFP and 82599_LS Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 10/18] ixgbe: Modify time to wait in polling flash update Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 11/18] ixgbe: New error type Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 12/18] ixgbe: Use hardware MAC type for I2C control Ouyang Changchun
2014-09-25 14:18 ` [dpdk-dev] [PATCH 13/18] ixgbe: semaphore mask move into hardware physical information Ouyang Changchun
2014-09-25 14:19 ` [dpdk-dev] [PATCH 14/18] ixgbe: Remove unnecessary delay Ouyang Changchun
2014-09-25 14:19 ` [dpdk-dev] [PATCH 15/18] ixgbe: New function for resetting VF register Ouyang Changchun
2014-09-25 14:19 ` Ouyang Changchun [this message]
2014-09-25 14:19 ` [dpdk-dev] [PATCH 17/18] ixgbe: Support X550 in IXGBE base code Ouyang Changchun
2014-09-25 14:19 ` [dpdk-dev] [PATCH 18/18] ixgbe: Support X550 in IXGBE poll mode driver Ouyang Changchun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411654744-9460-17-git-send-email-changchun.ouyang@intel.com \
--to=changchun.ouyang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).