From: Huawei Xie <huawei.xie@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 02/11] lib/librte_vhost: refactor vhost lib for subsequent transform
Date: Fri, 26 Sep 2014 17:45:49 +0800 [thread overview]
Message-ID: <1411724758-27488-3-git-send-email-huawei.xie@intel.com> (raw)
In-Reply-To: <1411724758-27488-1-git-send-email-huawei.xie@intel.com>
This patch does simple split of the original vhost example source
files in vhost lib directory.
vhost rx/tx functions virtio_dev_rx/tx are copied from main.c to
new file vhost_rxtx.c and license header is added.
main.c and main.h are removed and will be copied to new vhost
example in subsequent patch.
virtio-net.h is renamed to rte_virtio_net.h as API header file.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
lib/librte_vhost/main.c | 3725 -------------------------------------
lib/librte_vhost/main.h | 86 -
lib/librte_vhost/rte_virtio_net.h | 161 ++
lib/librte_vhost/vhost_rxtx.c | 281 +++
lib/librte_vhost/virtio-net.h | 161 --
5 files changed, 442 insertions(+), 3972 deletions(-)
delete mode 100644 lib/librte_vhost/main.c
delete mode 100644 lib/librte_vhost/main.h
create mode 100644 lib/librte_vhost/rte_virtio_net.h
create mode 100644 lib/librte_vhost/vhost_rxtx.c
delete mode 100644 lib/librte_vhost/virtio-net.h
diff --git a/lib/librte_vhost/main.c b/lib/librte_vhost/main.c
deleted file mode 100644
index 85ee8b8..0000000
--- a/lib/librte_vhost/main.c
+++ /dev/null
@@ -1,3725 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#include <arpa/inet.h>
-#include <getopt.h>
-#include <linux/if_ether.h>
-#include <linux/if_vlan.h>
-#include <linux/virtio_net.h>
-#include <linux/virtio_ring.h>
-#include <signal.h>
-#include <stdint.h>
-#include <sys/eventfd.h>
-#include <sys/param.h>
-#include <unistd.h>
-
-#include <rte_atomic.h>
-#include <rte_cycles.h>
-#include <rte_ethdev.h>
-#include <rte_log.h>
-#include <rte_string_fns.h>
-#include <rte_malloc.h>
-
-#include "main.h"
-#include "virtio-net.h"
-#include "vhost-net-cdev.h"
-
-#define MAX_QUEUES 128
-
-/* the maximum number of external ports supported */
-#define MAX_SUP_PORTS 1
-
-/*
- * Calculate the number of buffers needed per port
- */
-#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
- (num_switching_cores*MAX_PKT_BURST) + \
- (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
- (num_switching_cores*MBUF_CACHE_SIZE))
-
-#define MBUF_CACHE_SIZE 128
-#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
-
-/*
- * No frame data buffer allocated from host are required for zero copy
- * implementation, guest will allocate the frame data buffer, and vhost
- * directly use it.
- */
-#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
-#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
- + RTE_PKTMBUF_HEADROOM)
-#define MBUF_CACHE_SIZE_ZCP 0
-
-/*
- * RX and TX Prefetch, Host, and Write-back threshold values should be
- * carefully set for optimal performance. Consult the network
- * controller's datasheet and supporting DPDK documentation for guidance
- * on how these parameters should be set.
- */
-#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
-#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
-#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
-#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
-#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
-
-#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
-#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
-#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
-
-#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
-#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
-
-#define JUMBO_FRAME_MAX_SIZE 0x2600
-
-/* State of virtio device. */
-#define DEVICE_MAC_LEARNING 0
-#define DEVICE_RX 1
-#define DEVICE_SAFE_REMOVE 2
-
-/* Config_core_flag status definitions. */
-#define REQUEST_DEV_REMOVAL 1
-#define ACK_DEV_REMOVAL 0
-
-/* Configurable number of RX/TX ring descriptors */
-#define RTE_TEST_RX_DESC_DEFAULT 1024
-#define RTE_TEST_TX_DESC_DEFAULT 512
-
-/*
- * Need refine these 2 macros for legacy and DPDK based front end:
- * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
- * And then adjust power 2.
- */
-/*
- * For legacy front end, 128 descriptors,
- * half for virtio header, another half for mbuf.
- */
-#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
-#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
-
-/* Get first 4 bytes in mbuf headroom. */
-#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
- + sizeof(struct rte_mbuf)))
-
-/* true if x is a power of 2 */
-#define POWEROF2(x) ((((x)-1) & (x)) == 0)
-
-#define INVALID_PORT_ID 0xFF
-
-/* Max number of devices. Limited by vmdq. */
-#define MAX_DEVICES 64
-
-/* Size of buffers used for snprintfs. */
-#define MAX_PRINT_BUFF 6072
-
-/* Maximum character device basename size. */
-#define MAX_BASENAME_SZ 10
-
-/* Maximum long option length for option parsing. */
-#define MAX_LONG_OPT_SZ 64
-
-/* Used to compare MAC addresses. */
-#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
-
-/* Number of descriptors per cacheline. */
-#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
-
-/* mask of enabled ports */
-static uint32_t enabled_port_mask = 0;
-
-/*Number of switching cores enabled*/
-static uint32_t num_switching_cores = 0;
-
-/* number of devices/queues to support*/
-static uint32_t num_queues = 0;
-uint32_t num_devices = 0;
-
-/*
- * Enable zero copy, pkts buffer will directly dma to hw descriptor,
- * disabled on default.
- */
-static uint32_t zero_copy;
-
-/* number of descriptors to apply*/
-static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
-static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
-
-/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
-#define MAX_RING_DESC 4096
-
-struct vpool {
- struct rte_mempool *pool;
- struct rte_ring *ring;
- uint32_t buf_size;
-} vpool_array[MAX_QUEUES+MAX_QUEUES];
-
-/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
-typedef enum {
- VM2VM_DISABLED = 0,
- VM2VM_SOFTWARE = 1,
- VM2VM_HARDWARE = 2,
- VM2VM_LAST
-} vm2vm_type;
-static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
-
-/* The type of host physical address translated from guest physical address. */
-typedef enum {
- PHYS_ADDR_CONTINUOUS = 0,
- PHYS_ADDR_CROSS_SUBREG = 1,
- PHYS_ADDR_INVALID = 2,
- PHYS_ADDR_LAST
-} hpa_type;
-
-/* Enable stats. */
-static uint32_t enable_stats = 0;
-/* Enable retries on RX. */
-static uint32_t enable_retry = 1;
-/* Specify timeout (in useconds) between retries on RX. */
-static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
-/* Specify the number of retries on RX. */
-static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
-
-/* Character device basename. Can be set by user. */
-static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
-
-/* Charater device index. Can be set by user. */
-static uint32_t dev_index = 0;
-
-/* This can be set by the user so it is made available here. */
-extern uint64_t VHOST_FEATURES;
-
-/* Default configuration for rx and tx thresholds etc. */
-static struct rte_eth_rxconf rx_conf_default = {
- .rx_thresh = {
- .pthresh = RX_PTHRESH,
- .hthresh = RX_HTHRESH,
- .wthresh = RX_WTHRESH,
- },
- .rx_drop_en = 1,
-};
-
-/*
- * These default values are optimized for use with the Intel(R) 82599 10 GbE
- * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
- * network controllers and/or network drivers.
- */
-static struct rte_eth_txconf tx_conf_default = {
- .tx_thresh = {
- .pthresh = TX_PTHRESH,
- .hthresh = TX_HTHRESH,
- .wthresh = TX_WTHRESH,
- },
- .tx_free_thresh = 0, /* Use PMD default values */
- .tx_rs_thresh = 0, /* Use PMD default values */
-};
-
-/* empty vmdq configuration structure. Filled in programatically */
-static struct rte_eth_conf vmdq_conf_default = {
- .rxmode = {
- .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
- .split_hdr_size = 0,
- .header_split = 0, /**< Header Split disabled */
- .hw_ip_checksum = 0, /**< IP checksum offload disabled */
- .hw_vlan_filter = 0, /**< VLAN filtering disabled */
- /*
- * It is necessary for 1G NIC such as I350,
- * this fixes bug of ipv4 forwarding in guest can't
- * forward pakets from one virtio dev to another virtio dev.
- */
- .hw_vlan_strip = 1, /**< VLAN strip enabled. */
- .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
- .hw_strip_crc = 0, /**< CRC stripped by hardware */
- },
-
- .txmode = {
- .mq_mode = ETH_MQ_TX_NONE,
- },
- .rx_adv_conf = {
- /*
- * should be overridden separately in code with
- * appropriate values
- */
- .vmdq_rx_conf = {
- .nb_queue_pools = ETH_8_POOLS,
- .enable_default_pool = 0,
- .default_pool = 0,
- .nb_pool_maps = 0,
- .pool_map = {{0, 0},},
- },
- },
-};
-
-static unsigned lcore_ids[RTE_MAX_LCORE];
-static uint8_t ports[RTE_MAX_ETHPORTS];
-static unsigned num_ports = 0; /**< The number of ports specified in command line */
-
-static const uint16_t external_pkt_default_vlan_tag = 2000;
-const uint16_t vlan_tags[] = {
- 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
- 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
- 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
- 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
- 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
- 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
- 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
- 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
-};
-
-/* ethernet addresses of ports */
-static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
-
-/* heads for the main used and free linked lists for the data path. */
-static struct virtio_net_data_ll *ll_root_used = NULL;
-static struct virtio_net_data_ll *ll_root_free = NULL;
-
-/* Array of data core structures containing information on individual core linked lists. */
-static struct lcore_info lcore_info[RTE_MAX_LCORE];
-
-/* Used for queueing bursts of TX packets. */
-struct mbuf_table {
- unsigned len;
- unsigned txq_id;
- struct rte_mbuf *m_table[MAX_PKT_BURST];
-};
-
-/* TX queue for each data core. */
-struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
-
-/* TX queue fori each virtio device for zero copy. */
-struct mbuf_table tx_queue_zcp[MAX_QUEUES];
-
-/* Vlan header struct used to insert vlan tags on TX. */
-struct vlan_ethhdr {
- unsigned char h_dest[ETH_ALEN];
- unsigned char h_source[ETH_ALEN];
- __be16 h_vlan_proto;
- __be16 h_vlan_TCI;
- __be16 h_vlan_encapsulated_proto;
-};
-
-/* IPv4 Header */
-struct ipv4_hdr {
- uint8_t version_ihl; /**< version and header length */
- uint8_t type_of_service; /**< type of service */
- uint16_t total_length; /**< length of packet */
- uint16_t packet_id; /**< packet ID */
- uint16_t fragment_offset; /**< fragmentation offset */
- uint8_t time_to_live; /**< time to live */
- uint8_t next_proto_id; /**< protocol ID */
- uint16_t hdr_checksum; /**< header checksum */
- uint32_t src_addr; /**< source address */
- uint32_t dst_addr; /**< destination address */
-} __attribute__((__packed__));
-
-/* Header lengths. */
-#define VLAN_HLEN 4
-#define VLAN_ETH_HLEN 18
-
-/* Per-device statistics struct */
-struct device_statistics {
- uint64_t tx_total;
- rte_atomic64_t rx_total_atomic;
- uint64_t rx_total;
- uint64_t tx;
- rte_atomic64_t rx_atomic;
- uint64_t rx;
-} __rte_cache_aligned;
-struct device_statistics dev_statistics[MAX_DEVICES];
-
-/*
- * Builds up the correct configuration for VMDQ VLAN pool map
- * according to the pool & queue limits.
- */
-static inline int
-get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
-{
- struct rte_eth_vmdq_rx_conf conf;
- unsigned i;
-
- memset(&conf, 0, sizeof(conf));
- conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
- conf.nb_pool_maps = num_devices;
- conf.enable_loop_back =
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
-
- for (i = 0; i < conf.nb_pool_maps; i++) {
- conf.pool_map[i].vlan_id = vlan_tags[ i ];
- conf.pool_map[i].pools = (1UL << i);
- }
-
- (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
- (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
- sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
- return 0;
-}
-
-/*
- * Validate the device number according to the max pool number gotten form
- * dev_info. If the device number is invalid, give the error message and
- * return -1. Each device must have its own pool.
- */
-static inline int
-validate_num_devices(uint32_t max_nb_devices)
-{
- if (num_devices > max_nb_devices) {
- RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
- return -1;
- }
- return 0;
-}
-
-/*
- * Initialises a given port using global settings and with the rx buffers
- * coming from the mbuf_pool passed as parameter
- */
-static inline int
-port_init(uint8_t port)
-{
- struct rte_eth_dev_info dev_info;
- struct rte_eth_conf port_conf;
- uint16_t rx_rings, tx_rings;
- uint16_t rx_ring_size, tx_ring_size;
- int retval;
- uint16_t q;
-
- /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
- rte_eth_dev_info_get (port, &dev_info);
-
- /*configure the number of supported virtio devices based on VMDQ limits */
- num_devices = dev_info.max_vmdq_pools;
- num_queues = dev_info.max_rx_queues;
-
- if (zero_copy) {
- rx_ring_size = num_rx_descriptor;
- tx_ring_size = num_tx_descriptor;
- tx_rings = dev_info.max_tx_queues;
- } else {
- rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
- tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
- tx_rings = (uint16_t)rte_lcore_count();
- }
-
- retval = validate_num_devices(MAX_DEVICES);
- if (retval < 0)
- return retval;
-
- /* Get port configuration. */
- retval = get_eth_conf(&port_conf, num_devices);
- if (retval < 0)
- return retval;
-
- if (port >= rte_eth_dev_count()) return -1;
-
- rx_rings = (uint16_t)num_queues,
- /* Configure ethernet device. */
- retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
- if (retval != 0)
- return retval;
-
- /* Setup the queues. */
- for (q = 0; q < rx_rings; q ++) {
- retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
- rte_eth_dev_socket_id(port), &rx_conf_default,
- vpool_array[q].pool);
- if (retval < 0)
- return retval;
- }
- for (q = 0; q < tx_rings; q ++) {
- retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
- rte_eth_dev_socket_id(port), &tx_conf_default);
- if (retval < 0)
- return retval;
- }
-
- /* Start the device. */
- retval = rte_eth_dev_start(port);
- if (retval < 0) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
- return retval;
- }
-
- rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
- RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
- RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
- " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
- (unsigned)port,
- vmdq_ports_eth_addr[port].addr_bytes[0],
- vmdq_ports_eth_addr[port].addr_bytes[1],
- vmdq_ports_eth_addr[port].addr_bytes[2],
- vmdq_ports_eth_addr[port].addr_bytes[3],
- vmdq_ports_eth_addr[port].addr_bytes[4],
- vmdq_ports_eth_addr[port].addr_bytes[5]);
-
- return 0;
-}
-
-/*
- * Set character device basename.
- */
-static int
-us_vhost_parse_basename(const char *q_arg)
-{
- /* parse number string */
-
- if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
- return -1;
- else
- snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
-
- return 0;
-}
-
-/*
- * Parse the portmask provided at run time.
- */
-static int
-parse_portmask(const char *portmask)
-{
- char *end = NULL;
- unsigned long pm;
-
- errno = 0;
-
- /* parse hexadecimal string */
- pm = strtoul(portmask, &end, 16);
- if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (pm == 0)
- return -1;
-
- return pm;
-
-}
-
-/*
- * Parse num options at run time.
- */
-static int
-parse_num_opt(const char *q_arg, uint32_t max_valid_value)
-{
- char *end = NULL;
- unsigned long num;
-
- errno = 0;
-
- /* parse unsigned int string */
- num = strtoul(q_arg, &end, 10);
- if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
- return -1;
-
- if (num > max_valid_value)
- return -1;
-
- return num;
-
-}
-
-/*
- * Display usage
- */
-static void
-us_vhost_usage(const char *prgname)
-{
- RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
- " --vm2vm [0|1|2]\n"
- " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
- " --dev-basename <name> --dev-index [0-N]\n"
- " --nb-devices ND\n"
- " -p PORTMASK: Set mask for ports to be used by application\n"
- " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
- " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
- " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
- " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
- " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
- " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
- " --dev-basename: The basename to be used for the character device.\n"
- " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
- " --zero-copy [0|1]: disable(default)/enable rx/tx "
- "zero copy\n"
- " --rx-desc-num [0-N]: the number of descriptors on rx, "
- "used only when zero copy is enabled.\n"
- " --tx-desc-num [0-N]: the number of descriptors on tx, "
- "used only when zero copy is enabled.\n",
- prgname);
-}
-
-/*
- * Parse the arguments given in the command line of the application.
- */
-static int
-us_vhost_parse_args(int argc, char **argv)
-{
- int opt, ret;
- int option_index;
- unsigned i;
- const char *prgname = argv[0];
- static struct option long_option[] = {
- {"vm2vm", required_argument, NULL, 0},
- {"rx-retry", required_argument, NULL, 0},
- {"rx-retry-delay", required_argument, NULL, 0},
- {"rx-retry-num", required_argument, NULL, 0},
- {"mergeable", required_argument, NULL, 0},
- {"stats", required_argument, NULL, 0},
- {"dev-basename", required_argument, NULL, 0},
- {"dev-index", required_argument, NULL, 0},
- {"zero-copy", required_argument, NULL, 0},
- {"rx-desc-num", required_argument, NULL, 0},
- {"tx-desc-num", required_argument, NULL, 0},
- {NULL, 0, 0, 0},
- };
-
- /* Parse command line */
- while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) {
- switch (opt) {
- /* Portmask */
- case 'p':
- enabled_port_mask = parse_portmask(optarg);
- if (enabled_port_mask == 0) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
- us_vhost_usage(prgname);
- return -1;
- }
- break;
-
- case 0:
- /* Enable/disable vm2vm comms. */
- if (!strncmp(long_option[option_index].name, "vm2vm",
- MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for "
- "vm2vm [0|1|2]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- vm2vm_mode = (vm2vm_type)ret;
- }
- }
-
- /* Enable/disable retries on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_retry = ret;
- }
- }
-
- /* Specify the retries delay time (in useconds) on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_delay_time = ret;
- }
- }
-
- /* Specify the retries number on RX. */
- if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- burst_rx_retry_num = ret;
- }
- }
-
- /* Enable/disable RX mergeable buffers. */
- if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- if (ret) {
- vmdq_conf_default.rxmode.jumbo_frame = 1;
- vmdq_conf_default.rxmode.max_rx_pkt_len
- = JUMBO_FRAME_MAX_SIZE;
- VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
- }
- }
- }
-
- /* Enable/disable stats. */
- if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- enable_stats = ret;
- }
- }
-
- /* Set character device basename. */
- if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
- if (us_vhost_parse_basename(optarg) == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- /* Set character device index. */
- if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- dev_index = ret;
- }
-
- /* Enable/disable rx/tx zero copy. */
- if (!strncmp(long_option[option_index].name,
- "zero-copy", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, 1);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument"
- " for zero-copy [0|1]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- zero_copy = ret;
-
- if (zero_copy) {
-#ifdef RTE_MBUF_REFCNT
- RTE_LOG(ERR, VHOST_CONFIG, "Before running "
- "zero copy vhost APP, please "
- "disable RTE_MBUF_REFCNT\n"
- "in config file and then rebuild DPDK "
- "core lib!\n"
- "Otherwise please disable zero copy "
- "flag in command line!\n");
- return -1;
-#endif
- }
- }
-
- /* Specify the descriptor number on RX. */
- if (!strncmp(long_option[option_index].name,
- "rx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for rx-desc-num[0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_rx_descriptor = ret;
- }
- }
-
- /* Specify the descriptor number on TX. */
- if (!strncmp(long_option[option_index].name,
- "tx-desc-num", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, MAX_RING_DESC);
- if ((ret == -1) || (!POWEROF2(ret))) {
- RTE_LOG(INFO, VHOST_CONFIG,
- "Invalid argument for tx-desc-num [0-N],"
- "power of 2 required.\n");
- us_vhost_usage(prgname);
- return -1;
- } else {
- num_tx_descriptor = ret;
- }
- }
-
- break;
-
- /* Invalid option - print options. */
- default:
- us_vhost_usage(prgname);
- return -1;
- }
- }
-
- for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
- if (enabled_port_mask & (1 << i))
- ports[num_ports++] = (uint8_t)i;
- }
-
- if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support software vm2vm,"
- "please specify 'vm2vm 2' to use hardware vm2vm.\n");
- return -1;
- }
-
- if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) {
- RTE_LOG(INFO, VHOST_PORT,
- "Vhost zero copy doesn't support jumbo frame,"
- "please specify '--mergeable 0' to disable the "
- "mergeable feature.\n");
- return -1;
- }
-
- return 0;
-}
-
-/*
- * Update the global var NUM_PORTS and array PORTS according to system ports number
- * and return valid ports number
- */
-static unsigned check_ports_num(unsigned nb_ports)
-{
- unsigned valid_num_ports = num_ports;
- unsigned portid;
-
- if (num_ports > nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
- num_ports, nb_ports);
- num_ports = nb_ports;
- }
-
- for (portid = 0; portid < num_ports; portid ++) {
- if (ports[portid] >= nb_ports) {
- RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
- ports[portid], (nb_ports - 1));
- ports[portid] = INVALID_PORT_ID;
- valid_num_ports--;
- }
- }
- return valid_num_ports;
-}
-
-/*
- * Macro to print out packet contents. Wrapped in debug define so that the
- * data path is not effected when debug is disabled.
- */
-#ifdef DEBUG
-#define PRINT_PACKET(device, addr, size, header) do { \
- char *pkt_addr = (char*)(addr); \
- unsigned int index; \
- char packet[MAX_PRINT_BUFF]; \
- \
- if ((header)) \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
- else \
- snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
- for (index = 0; index < (size); index++) { \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
- "%02hhx ", pkt_addr[index]); \
- } \
- snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
- \
- LOG_DEBUG(VHOST_DATA, "%s", packet); \
-} while(0)
-#else
-#define PRINT_PACKET(device, addr, size, header) do{} while(0)
-#endif
-
-/*
- * Function to convert guest physical addresses to vhost virtual addresses. This
- * is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
-{
- struct virtio_memory_regions *region;
- uint32_t regionidx;
- uint64_t vhost_va = 0;
-
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- region = &dev->mem->regions[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_va = region->address_offset + guest_pa;
- break;
- }
- }
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
- dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
-
- return vhost_va;
-}
-
-/*
- * Function to convert guest physical addresses to vhost physical addresses.
- * This is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
- uint32_t buf_len, hpa_type *addr_type)
-{
- struct virtio_memory_regions_hpa *region;
- uint32_t regionidx;
- uint64_t vhost_pa = 0;
-
- *addr_type = PHYS_ADDR_INVALID;
-
- for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
- region = &dev->mem->regions_hpa[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_pa = region->host_phys_addr_offset + guest_pa;
- if (likely((guest_pa + buf_len - 1)
- <= region->guest_phys_address_end))
- *addr_type = PHYS_ADDR_CONTINUOUS;
- else
- *addr_type = PHYS_ADDR_CROSS_SUBREG;
- break;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
- dev->device_fh, (void *)(uintptr_t)guest_pa,
- (void *)(uintptr_t)vhost_pa);
-
- return vhost_pa;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works when mergeable is disabled.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
- uint64_t buff_addr = 0;
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint16_t free_entries;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- /* As many data cores may want access to available buffers, they need to be reserved. */
- do {
- res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- free_entries = (avail_idx - res_base_idx);
- /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (count == 0)
- return 0;
-
- res_end_idx = res_base_idx + count;
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
- res_end_idx);
- } while (unlikely(success == 0));
- res_cur_idx = res_base_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
-
- /* Prefetch available ring to retrieve indexes. */
- rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (res_cur_idx != res_end_idx) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
-
- /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- /* Copy virtio_hdr to packet and increment buffer address */
- buff_hdr_addr = buff_addr;
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- buff_addr += vq->vhost_hlen;
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
-
- /* Copy mbuf data to buffer */
- rte_memcpy((void *)(uintptr_t)buff_addr,
- rte_pktmbuf_mtod(buff, const void *),
- rte_pktmbuf_data_len(buff));
- PRINT_PACKET(dev, (uintptr_t)buff_addr,
- rte_pktmbuf_data_len(buff), 0);
-
- res_cur_idx++;
- packet_success++;
-
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (res_cur_idx < res_end_idx) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- /* Wait until it's our turn to add our buffer to the used ring. */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- return count;
-}
-
-static inline uint32_t __attribute__((always_inline))
-copy_from_mbuf_to_vring(struct virtio_net *dev,
- uint16_t res_base_idx, uint16_t res_end_idx,
- struct rte_mbuf *pkt)
-{
- uint32_t vec_idx = 0;
- uint32_t entry_success = 0;
- struct vhost_virtqueue *vq;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
- {0, 0, 0, 0, 0, 0}, 0};
- uint16_t cur_idx = res_base_idx;
- uint64_t vb_addr = 0;
- uint64_t vb_hdr_addr = 0;
- uint32_t seg_offset = 0;
- uint32_t vb_offset = 0;
- uint32_t seg_avail;
- uint32_t vb_avail;
- uint32_t cpy_len, entry_len;
-
- if (pkt == NULL)
- return 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
- "End Index %d\n",
- dev->device_fh, cur_idx, res_end_idx);
-
- /*
- * Convert from gpa to vva
- * (guest physical addr -> vhost virtual addr)
- */
- vq = dev->virtqueue[VIRTIO_RXQ];
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
- vb_hdr_addr = vb_addr;
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- virtio_hdr.num_buffers = res_end_idx - res_base_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
- dev->device_fh, virtio_hdr.num_buffers);
-
- rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
-
- seg_avail = rte_pktmbuf_data_len(pkt);
- vb_offset = vq->vhost_hlen;
- vb_avail =
- vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
-
- entry_len = vq->vhost_hlen;
-
- if (vb_avail == 0) {
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vq->vhost_hlen;
-
- if ((vq->desc[desc_idx].flags
- & VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
-
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- while (cpy_len > 0) {
- /* Copy mbuf data to vring buffer */
- rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
- (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
- cpy_len);
-
- PRINT_PACKET(dev,
- (uintptr_t)(vb_addr + vb_offset),
- cpy_len, 0);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- seg_avail -= cpy_len;
- vb_avail -= cpy_len;
- entry_len += cpy_len;
-
- if (seg_avail != 0) {
- /*
- * The virtio buffer in this vring
- * entry reach to its end.
- * But the segment doesn't complete.
- */
- if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This current segment complete, need continue to
- * check if the whole packet complete or not.
- */
- pkt = pkt->next;
- if (pkt != NULL) {
- /*
- * There are more segments.
- */
- if (vb_avail == 0) {
- /*
- * This current buffer from vring is
- * used up, need fetch next buffer
- * from buf_vec.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- if ((vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- uint16_t wrapped_idx =
- cur_idx & (vq->size - 1);
- /*
- * Update used ring with the
- * descriptor information
- */
- vq->used->ring[wrapped_idx].id
- = desc_idx;
- vq->used->ring[wrapped_idx].len
- = entry_len;
- entry_success++;
- entry_len = 0;
- cur_idx++;
- }
-
- /* Get next buffer from buf_vec. */
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_avail =
- vq->buf_vec[vec_idx].buf_len;
- vb_offset = 0;
- }
-
- seg_offset = 0;
- seg_avail = rte_pktmbuf_data_len(pkt);
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This whole packet completes.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- while (vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) {
- desc_idx = vq->desc[desc_idx].next;
- vq->desc[desc_idx].len = 0;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- seg_avail = 0;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
- }
- }
-
- return entry_success;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works for mergeable RX.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- uint32_t pkt_idx = 0, entry_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
- dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
-
- if (count == 0)
- return 0;
-
- for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
- uint32_t secure_len = 0;
- uint16_t need_cnt;
- uint32_t vec_idx = 0;
- uint32_t pkt_len = pkts[pkt_idx]->pkt_len + vq->vhost_hlen;
- uint16_t i, id;
-
- do {
- /*
- * As many data cores may want access to available
- * buffers, they need to be reserved.
- */
- res_base_idx = vq->last_used_idx_res;
- res_cur_idx = res_base_idx;
-
- do {
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- if (unlikely(res_cur_idx == avail_idx)) {
- /*
- * If retry is enabled and the queue is
- * full then we wait and retry to avoid
- * packet loss.
- */
- if (enable_retry) {
- uint8_t cont = 0;
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- if (likely(res_cur_idx != avail_idx)) {
- cont = 1;
- break;
- }
- }
- if (cont == 1)
- continue;
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Failed "
- "to get enough desc from "
- "vring\n",
- dev->device_fh);
- return pkt_idx;
- } else {
- uint16_t wrapped_idx =
- (res_cur_idx) & (vq->size - 1);
- uint32_t idx =
- vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
-
- do {
- next_desc = 0;
- secure_len += vq->desc[idx].len;
- if (vq->desc[idx].flags &
- VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
-
- res_cur_idx++;
- }
- } while (pkt_len > secure_len);
-
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res,
- res_base_idx,
- res_cur_idx);
- } while (success == 0);
-
- id = res_base_idx;
- need_cnt = res_cur_idx - res_base_idx;
-
- for (i = 0; i < need_cnt; i++, id++) {
- uint16_t wrapped_idx = id & (vq->size - 1);
- uint32_t idx = vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
- do {
- next_desc = 0;
- vq->buf_vec[vec_idx].buf_addr =
- vq->desc[idx].addr;
- vq->buf_vec[vec_idx].buf_len =
- vq->desc[idx].len;
- vq->buf_vec[vec_idx].desc_idx = idx;
- vec_idx++;
-
- if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
- }
-
- res_end_idx = res_cur_idx;
-
- entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
- res_end_idx, pkts[pkt_idx]);
-
- rte_compiler_barrier();
-
- /*
- * Wait until it's our turn to add our buffer
- * to the used ring.
- */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += entry_success;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- }
-
- return count;
-}
-
-/*
- * Compares a packet destination MAC address to a device MAC address.
- */
-static inline int __attribute__((always_inline))
-ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
-{
- return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
-}
-
-/*
- * This function learns the MAC address of the device and registers this along with a
- * vlan tag to a VMDQ.
- */
-static int
-link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct ether_hdr *pkt_hdr;
- struct virtio_net_data_ll *dev_ll;
- int i, ret;
-
- /* Learn MAC address of guest device from packet */
- pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
-
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
- return -1;
- }
- dev_ll = dev_ll->next;
- }
-
- for (i = 0; i < ETHER_ADDR_LEN; i++)
- dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
-
- /* vlan_tag currently uses the device_id. */
- dev->vlan_tag = vlan_tags[dev->device_fh];
-
- /* Print out VMDQ registration info. */
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
- dev->device_fh,
- dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
- dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
- dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
- dev->vlan_tag);
-
- /* Register the MAC address. */
- ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
- if (ret)
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
- dev->device_fh);
-
- /* Enable stripping of the vlan tag as we handle routing. */
- rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
-
- /* Set device as ready for RX. */
- dev->ready = DEVICE_RX;
-
- return 0;
-}
-
-/*
- * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
- * queue before disabling RX on the device.
- */
-static inline void
-unlink_vmdq(struct virtio_net *dev)
-{
- unsigned i = 0;
- unsigned rx_count;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
-
- if (dev->ready == DEVICE_RX) {
- /*clear MAC and VLAN settings*/
- rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
- for (i = 0; i < 6; i++)
- dev->mac_address.addr_bytes[i] = 0;
-
- dev->vlan_tag = 0;
-
- /*Clear out the receive buffers*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- while (rx_count) {
- for (i = 0; i < rx_count; i++)
- rte_pktmbuf_free(pkts_burst[i]);
-
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
- }
-
- dev->ready = DEVICE_MAC_LEARNING;
- }
-}
-
-/*
- * Check if the packet destination MAC address is for a local device. If so then put
- * the packet on that devices RX queue. If not then return.
- */
-static inline unsigned __attribute__((always_inline))
-virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
-{
- struct virtio_net_data_ll *dev_ll;
- struct ether_hdr *pkt_hdr;
- uint64_t ret = 0;
-
- pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
-
- /*get the used devices list*/
- dev_ll = ll_root_used;
-
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /* Drop the packet if the TX packet is destined for the TX device. */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
- dev_ll->dev->device_fh);
- return 0;
- }
-
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
-
- if (dev_ll->dev->remove) {
- /*drop the packet if the device is marked for removal*/
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
- } else {
- uint32_t mergeable =
- dev_ll->dev->features &
- (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- /*send the packet to the local virtio device*/
- if (likely(mergeable == 0))
- ret = virtio_dev_rx(dev_ll->dev, &m, 1);
- else
- ret = virtio_dev_merge_rx(dev_ll->dev,
- &m, 1);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- 1);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
- ret);
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx += ret;
- }
- }
-
- return 0;
- }
- dev_ll = dev_ll->next;
- }
-
- return -1;
-}
-
-/*
- * This function routes the TX packet to the correct interface. This may be a local device
- * or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
-{
- struct mbuf_table *tx_q;
- struct vlan_ethhdr *vlan_hdr;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf, *prev;
- unsigned len, ret, offset = 0;
- const uint16_t lcore_id = rte_lcore_id();
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
-
- /*check if destination is local VM*/
- if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
- return;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX)
- && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
- /*
- * Drop the packet if the TX packet is
- * destined for the TX device.
- */
- if (dev_ll->dev->device_fh == dev->device_fh) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- " MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- return;
- }
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
-
- /*Add packet to the port tx queue*/
- tx_q = &lcore_tx_queue[lcore_id];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(mbuf == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- mbuf->data_len = m->data_len + VLAN_HLEN + offset;
- mbuf->pkt_len = m->pkt_len + VLAN_HLEN + offset;
- mbuf->nb_segs = m->nb_segs;
-
- /* Copy ethernet header to mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
- rte_pktmbuf_mtod(m, const void *),
- ETH_HLEN);
-
-
- /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
- vlan_hdr = rte_pktmbuf_mtod(mbuf, struct vlan_ethhdr *);
- vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
- vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
- vlan_hdr->h_vlan_TCI = htons(vlan_tag);
-
- /* Copy the remaining packet contents to the mbuf. */
- rte_memcpy((void *)(rte_pktmbuf_mtod(mbuf, uint8_t *) + VLAN_ETH_HLEN),
- (const void *)(rte_pktmbuf_mtod(m, uint8_t *) + ETH_HLEN),
- (m->data_len - ETH_HLEN));
-
- /* Copy the remaining segments for the whole packet. */
- prev = mbuf;
- while (m->next) {
- /* Allocate an mbuf and populate the structure. */
- struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(next_mbuf == NULL)) {
- rte_pktmbuf_free(mbuf);
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- m = m->next;
- prev->next = next_mbuf;
- prev = next_mbuf;
- next_mbuf->data_len = m->data_len;
-
- /* Copy data to next mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
- rte_pktmbuf_mtod(m, const void *), m->data_len);
- }
-
- tx_q->m_table[len] = mbuf;
- len++;
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
- /* Free any buffers not handled by TX and update the port stats. */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- }
-
- tx_q->len = len;
- return;
-}
-
-static inline void __attribute__((always_inline))
-virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- if (free_entries > MAX_PKT_BURST)
- free_entries = MAX_PKT_BURST;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (packet_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[packet_success];
- vq->used->ring[used_idx].len = 0;
-
- /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
- m.data_len = desc->len;
- m.pkt_len = desc->len;
- m.data_off = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /* If this is the first received packet we need to learn the MAC and setup VMDQ */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
- virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
-
- vq->last_used_idx++;
- packet_success++;
- }
-
- rte_compiler_barrier();
- vq->used->idx += packet_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/* This function works for TX packets with mergeable feature enabled. */
-static inline void __attribute__((always_inline))
-virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf *m, *prev;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t vb_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, entry_success = 0;
- uint16_t avail_idx;
- uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
- + RTE_PKTMBUF_HEADROOM);
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
- dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (entry_success < free_entries) {
- uint32_t vb_avail, vb_offset;
- uint32_t seg_avail, seg_offset;
- uint32_t cpy_len;
- uint32_t seg_num = 0;
- struct rte_mbuf *cur;
- uint8_t alloc_err = 0;
-
- desc = &vq->desc[head[entry_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (entry_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[entry_success];
- vq->used->ring[used_idx].len = 0;
-
- vb_offset = 0;
- vb_avail = desc->len;
- seg_offset = 0;
- seg_avail = buf_size;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
-
- /* Allocate an mbuf and populate the structure. */
- m = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(m == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- seg_num++;
- cur = m;
- prev = m;
- while (cpy_len != 0) {
- rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
- (void *)((uintptr_t)(vb_addr + vb_offset)),
- cpy_len);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- vb_avail -= cpy_len;
- seg_avail -= cpy_len;
-
- if (vb_avail != 0) {
- /*
- * The segment reachs to its end,
- * while the virtio buffer in TX vring has
- * more data to be copied.
- */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- /* Allocate mbuf and populate the structure. */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to "
- "allocate memory for mbuf.\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
-
- seg_num++;
- prev->next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- } else {
- if (desc->flags & VRING_DESC_F_NEXT) {
- /*
- * There are more virtio buffers in
- * same vring entry need to be copied.
- */
- if (seg_avail == 0) {
- /*
- * The current segment hasn't
- * room to accomodate more
- * data.
- */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- /*
- * Allocate an mbuf and
- * populate the structure.
- */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR,
- VHOST_DATA,
- "Failed to "
- "allocate memory "
- "for mbuf\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
- seg_num++;
- prev->next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- }
-
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = desc->len;
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr,
- desc->len, 0);
- } else {
- /* The whole packet completes. */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- vb_avail = 0;
- }
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
-
- if (unlikely(alloc_err == 1))
- break;
-
- m->nb_segs = seg_num;
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- entry_success = free_entries;
- vq->last_used_idx += entry_success;
- rte_pktmbuf_free(m);
- break;
- }
- }
-
- virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
- vq->last_used_idx++;
- entry_success++;
- rte_pktmbuf_free(m);
- }
-
- rte_compiler_barrier();
- vq->used->idx += entry_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered with the
- * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
- * with all devices in the main linked list.
- */
-static int
-switch_worker(__attribute__((unused)) void *arg)
-{
- struct rte_mempool *mbuf_pool = arg;
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret, i;
- const uint16_t lcore_id = rte_lcore_id();
- const uint16_t num_cores = (uint16_t)rte_lcore_count();
- uint16_t rx_count = 0;
- uint32_t mergeable = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- tx_q = &lcore_tx_queue[lcore_id];
- for (i = 0; i < num_cores; i ++) {
- if (lcore_ids[i] == lcore_id) {
- tx_q->txq_id = i;
- break;
- }
- }
-
- while(1) {
- cur_tsc = rte_rdtsc();
- /*
- * TX burst queue drain
- */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
-
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
-
- /*Tx any packets in the queue*/
- ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
-
- tx_q->len = 0;
- }
-
- prev_tsc = cur_tsc;
-
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
- /*
- * Inform the configuration core that we have exited the linked list and that no devices are
- * in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /*
- * Process devices
- */
- dev_ll = lcore_ll->ll_root_used;
-
- while (dev_ll != NULL) {
- /*get virtio device ID*/
- dev = dev_ll->dev;
- mergeable =
- dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
-
- if (dev->remove) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
- if (likely(dev->ready == DEVICE_RX)) {
- /*Handle guest RX*/
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
-
- if (rx_count) {
- if (likely(mergeable == 0))
- ret_count =
- virtio_dev_rx(dev,
- pkts_burst, rx_count);
- else
- ret_count =
- virtio_dev_merge_rx(dev,
- pkts_burst, rx_count);
-
- if (enable_stats) {
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
- rx_count);
- rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
- }
- while (likely(rx_count)) {
- rx_count--;
- rte_pktmbuf_free(pkts_burst[rx_count]);
- }
-
- }
- }
-
- if (!dev->remove) {
- /*Handle guest TX*/
- if (likely(mergeable == 0))
- virtio_dev_tx(dev, mbuf_pool);
- else
- virtio_dev_merge_tx(dev, mbuf_pool);
- }
-
- /*move to the next device in the list*/
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-/*
- * This function gets available ring number for zero copy rx.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_num_zcp(struct virtio_net *dev)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
-
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- return (uint32_t)(avail_idx - vq->last_used_idx_res);
-}
-
-/*
- * This function gets available ring index for zero copy rx,
- * it will retry 'burst_rx_retry_num' times till it get enough ring index.
- * Only one thread will call this funciton for a paticular virtio device,
- * so, it is designed as non-thread-safe function.
- */
-static inline uint32_t __attribute__((always_inline))
-get_available_ring_index_zcp(struct virtio_net *dev,
- uint16_t *res_base_idx, uint32_t count)
-{
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
- uint16_t avail_idx;
- uint32_t retry = 0;
- uint16_t free_entries;
-
- *res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
- "avail idx: %d, "
- "res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx, *res_base_idx,
- free_entries);
-
- /*
- * If retry is enabled and the queue is full then we wait
- * and retry to avoid packet loss.
- */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - *res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (unlikely(count == 0)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Fail in get_available_ring_index_zcp: "
- "avail idx: %d, res base idx:%d, free entries:%d\n",
- dev->device_fh, avail_idx,
- *res_base_idx, free_entries);
- return 0;
- }
-
- vq->last_used_idx_res = *res_base_idx + count;
-
- return count;
-}
-
-/*
- * This function put descriptor back to used list.
- */
-static inline void __attribute__((always_inline))
-put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
-{
- uint16_t res_cur_idx = vq->last_used_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
- rte_compiler_barrier();
- *(volatile uint16_t *)&vq->used->idx += 1;
- vq->last_used_idx += 1;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/*
- * This function get available descriptor from vitio vring and un-attached mbuf
- * from vpool->ring, and then attach them together. It needs adjust the offset
- * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
- * frame data may be put to wrong location in mbuf.
- */
-static inline void __attribute__((always_inline))
-attach_rxmbuf_zcp(struct virtio_net *dev)
-{
- uint16_t res_base_idx, desc_idx;
- uint64_t buff_addr, phys_addr;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *mbuf = NULL;
- struct vpool *vpool;
- hpa_type addr_type;
-
- vpool = &vpool_array[dev->vmdq_rx_q];
- vq = dev->virtqueue[VIRTIO_RXQ];
-
- do {
- if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
- 1) != 1))
- return;
- desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
-
- desc = &vq->desc[desc_idx];
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc = &vq->desc[desc->next];
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
- &addr_type);
- } else {
- buff_addr = gpa_to_vva(dev,
- desc->addr + vq->vhost_hlen);
- phys_addr = gpa_to_hpa(dev,
- desc->addr + vq->vhost_hlen,
- desc->len, &addr_type);
- }
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
- " address found when attaching RX frame buffer"
- " address!\n", dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching RX frame "
- "buffer address!\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- continue;
- }
- } while (unlikely(phys_addr == 0));
-
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: "
- "ring_sc_dequeue fail.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (unlikely(vpool->buf_size > desc->len)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
- "length(%d) of descriptor idx: %d less than room "
- "size required: %d\n",
- dev->device_fh, desc->len, desc_idx, vpool->buf_size);
- put_desc_to_used_list_zcp(vq, desc_idx);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- return;
- }
-
- mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
- mbuf->data_off = RTE_PKTMBUF_HEADROOM;
- mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
- mbuf->data_len = desc->len;
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
- "descriptor idx:%d\n",
- dev->device_fh, res_base_idx, desc_idx);
-
- __rte_mbuf_raw_free(mbuf);
-
- return;
-}
-
-/*
- * Detach an attched packet mbuf -
- * - restore original mbuf address and length values.
- * - reset pktmbuf data and data_len to their default values.
- * All other fields of the given packet mbuf will be left intact.
- *
- * @param m
- * The attached packet mbuf.
- */
-static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
-{
- const struct rte_mempool *mp = m->pool;
- void *buf = RTE_MBUF_TO_BADDR(m);
- uint32_t buf_ofs;
- uint32_t buf_len = mp->elt_size - sizeof(*m);
- m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
-
- m->buf_addr = buf;
- m->buf_len = (uint16_t)buf_len;
-
- buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
- RTE_PKTMBUF_HEADROOM : m->buf_len;
- m->data_off = buf_ofs;
-
- m->data_len = 0;
-}
-
-/*
- * This function is called after packets have been transimited. It fetchs mbuf
- * from vpool->pool, detached it and put into vpool->ring. It also update the
- * used index and kick the guest if necessary.
- */
-static inline uint32_t __attribute__((always_inline))
-txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
-{
- struct rte_mbuf *mbuf;
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
- uint32_t index = 0;
- uint32_t mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
- "clean is: %d\n",
- dev->device_fh, mbuf_count);
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, mbuf);
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
- vq->used->ring[used_idx].len = 0;
-
- used_idx = (used_idx + 1) & (vq->size - 1);
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
- "clean is: %d\n",
- dev->device_fh, rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
- "clean is : %d\n",
- dev->device_fh, rte_ring_count(vpool->ring));
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: before updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- vq->last_used_idx += mbuf_count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in txmbuf_clean_zcp: after updated "
- "vq->last_used_idx:%d\n",
- dev->device_fh, vq->last_used_idx);
-
- rte_compiler_barrier();
-
- *(volatile uint16_t *)&vq->used->idx += mbuf_count;
-
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return 0;
-}
-
-/*
- * This function is called when a virtio device is destroy.
- * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
- */
-static void mbuf_destroy_zcp(struct vpool *vpool)
-{
- struct rte_mbuf *mbuf = NULL;
- uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool before "
- "mbuf_destroy_zcp is: %d\n",
- mbuf_count);
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring before "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-
- for (index = 0; index < mbuf_count; index++) {
- mbuf = __rte_mbuf_raw_alloc(vpool->pool);
- if (likely(mbuf != NULL)) {
- if (likely(RTE_MBUF_INDIRECT(mbuf)))
- pktmbuf_detach_zcp(mbuf);
- rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
- }
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in mempool after "
- "mbuf_destroy_zcp is: %d\n",
- rte_mempool_count(vpool->pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in mbuf_destroy_zcp: mbuf count in ring after "
- "mbuf_destroy_zcp is : %d\n",
- rte_ring_count(vpool->ring));
-}
-
-/*
- * This function update the use flag and counter.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr
- = {{0, 0, 0, 0, 0, 0}, 0};
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint16_t res_cur_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
-
- if (count == 0)
- return 0;
-
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- res_cur_idx = vq->last_used_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
- dev->device_fh, res_cur_idx, res_cur_idx + count);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (packet_success != count) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: update the used idx for "
- "pkt[%d] descriptor idx: %d\n",
- dev->device_fh, packet_success,
- MBUF_HEADROOM_UINT32(buff));
-
- PRINT_PACKET(dev,
- (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
- + RTE_PKTMBUF_HEADROOM),
- rte_pktmbuf_data_len(buff), 0);
-
- /* Buffer address translation for virtio header. */
- buff_hdr_addr = gpa_to_vva(dev, desc->addr);
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id
- = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len
- = packet_len;
- res_cur_idx++;
- packet_success++;
-
- /* A header is required per buffer. */
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (likely(packet_success < count)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: before update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx += count;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in dev_rx_zcp: after update used idx: "
- "vq.last_used_idx: %d, vq->used->idx: %d\n",
- dev->device_fh, vq->last_used_idx, vq->used->idx);
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
- return count;
-}
-
-/*
- * This function routes the TX packet to the correct interface.
- * This may be a local device or the physical port.
- */
-static inline void __attribute__((always_inline))
-virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
- uint32_t desc_idx, uint8_t need_copy)
-{
- struct mbuf_table *tx_q;
- struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf = NULL;
- unsigned len, ret, offset = 0;
- struct vpool *vpool;
- struct virtio_net_data_ll *dev_ll = ll_root_used;
- struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
- uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
-
- /*Add packet to the port tx queue*/
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- len = tx_q->len;
-
- /* Allocate an mbuf and populate the structure. */
- vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
- rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
- if (unlikely(mbuf == NULL)) {
- struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Failed to allocate memory for mbuf.\n",
- dev->device_fh);
- put_desc_to_used_list_zcp(vq, desc_idx);
- return;
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Avoid using a vlan tag from any vm for external pkt, such as
- * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
- * selection, MAC address determines it as an external pkt
- * which should go to network, while vlan tag determine it as
- * a vm2vm pkt should forward to another vm. Hardware confuse
- * such a ambiguous situation, so pkt will lost.
- */
- vlan_tag = external_pkt_default_vlan_tag;
- while (dev_ll != NULL) {
- if (likely(dev_ll->dev->ready == DEVICE_RX) &&
- ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
-
- /*
- * Drop the packet if the TX packet is destined
- * for the TX device.
- */
- if (unlikely(dev_ll->dev->device_fh
- == dev->device_fh)) {
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: Source and destination"
- "MAC addresses are the same. Dropping "
- "packet.\n",
- dev_ll->dev->device_fh);
- MBUF_HEADROOM_UINT32(mbuf)
- = (uint32_t)desc_idx;
- __rte_mbuf_raw_free(mbuf);
- return;
- }
-
- /*
- * Packet length offset 4 bytes for HW vlan
- * strip when L2 switch back.
- */
- offset = 4;
- vlan_tag =
- (uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") TX: pkt to local VM device id:"
- "(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
- vlan_tag);
-
- break;
- }
- dev_ll = dev_ll->next;
- }
- }
-
- mbuf->nb_segs = m->nb_segs;
- mbuf->next = m->next;
- mbuf->data_len = m->data_len + offset;
- mbuf->pkt_len = mbuf->data_len;
- if (unlikely(need_copy)) {
- /* Copy the packet contents to the mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
- rte_pktmbuf_mtod(m, void *),
- m->data_len);
- } else {
- mbuf->data_off = m->data_off;
- mbuf->buf_physaddr = m->buf_physaddr;
- mbuf->buf_addr = m->buf_addr;
- }
- mbuf->ol_flags = PKT_TX_VLAN_PKT;
- mbuf->vlan_tci = vlan_tag;
- mbuf->l2_len = sizeof(struct ether_hdr);
- mbuf->l3_len = sizeof(struct ipv4_hdr);
- MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
-
- tx_q->m_table[len] = mbuf;
- len++;
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
- dev->device_fh,
- mbuf->nb_segs,
- (mbuf->next == NULL) ? "null" : "non-null");
-
- if (enable_stats) {
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx++;
- }
-
- if (unlikely(len == MAX_PKT_BURST)) {
- m_table = (struct rte_mbuf **)tx_q->m_table;
- ret = rte_eth_tx_burst(ports[0],
- (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
-
- /*
- * Free any buffers not handled by TX and update
- * the port stats.
- */
- if (unlikely(ret < len)) {
- do {
- rte_pktmbuf_free(m_table[ret]);
- } while (++ret < len);
- }
-
- len = 0;
- txmbuf_clean_zcp(dev, vpool);
- }
-
- tx_q->len = len;
-
- return;
-}
-
-/*
- * This function TX all available packets in virtio TX queue for one
- * virtio-net device. If it is first packet, it learns MAC address and
- * setup VMDQ.
- */
-static inline void __attribute__((always_inline))
-virtio_dev_tx_zcp(struct virtio_net *dev)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0, phys_addr;
- uint32_t head[MAX_PKT_BURST];
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
- uint8_t need_copy = 0;
- hpa_type addr_type;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx_res == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
-
- /* Get the number of free entries in the ring */
- free_entries = (avail_idx - vq->last_used_idx_res);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries
- = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i]
- = vq->avail->ring[(vq->last_used_idx_res + i)
- & (vq->size - 1)];
-
- vq->last_used_idx_res += free_entries;
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
-
- if (likely(packet_success < (free_entries - 1)))
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success + 1]]);
-
- if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Invalid frame buffer address found"
- "when TX packets!\n",
- dev->device_fh);
- packet_success++;
- continue;
- }
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)buff_addr);
-
- /*
- * Setup dummy mbuf. This is copied to a real mbuf if
- * transmitted out the physical port.
- */
- m.data_len = desc->len;
- m.nb_segs = 1;
- m.next = NULL;
- m.data_off = 0;
- m.buf_addr = (void *)(uintptr_t)buff_addr;
- m.buf_physaddr = phys_addr;
-
- /*
- * Check if the frame buffer address from guest crosses
- * sub-region or not.
- */
- if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
- RTE_LOG(ERR, VHOST_DATA,
- "(%"PRIu64") Frame buffer address cross "
- "sub-regioin found when attaching TX frame "
- "buffer address!\n",
- dev->device_fh);
- need_copy = 1;
- } else
- need_copy = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
-
- virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
- packet_success++;
- }
-}
-
-/*
- * This function is called by each data core. It handles all RX/TX registered
- * with the core. For TX the specific lcore linked list is used. For RX, MAC
- * addresses are compared with all devices in the main linked list.
- */
-static int
-switch_worker_zcp(__attribute__((unused)) void *arg)
-{
- struct virtio_net *dev = NULL;
- struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- struct virtio_net_data_ll *dev_ll;
- struct mbuf_table *tx_q;
- volatile struct lcore_ll_info *lcore_ll;
- const uint64_t drain_tsc
- = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
- * BURST_TX_DRAIN_US;
- uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
- unsigned ret;
- const uint16_t lcore_id = rte_lcore_id();
- uint16_t count_in_ring, rx_count = 0;
-
- RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
-
- lcore_ll = lcore_info[lcore_id].lcore_ll;
- prev_tsc = 0;
-
- while (1) {
- cur_tsc = rte_rdtsc();
-
- /* TX burst queue drain */
- diff_tsc = cur_tsc - prev_tsc;
- if (unlikely(diff_tsc > drain_tsc)) {
- /*
- * Get mbuf from vpool.pool and detach mbuf and
- * put back into vpool.ring.
- */
- dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- /* Get virtio device ID */
- dev = dev_ll->dev;
-
- if (likely(!dev->remove)) {
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- if (tx_q->len) {
- LOG_DEBUG(VHOST_DATA,
- "TX queue drained after timeout"
- " with burst size %u\n",
- tx_q->len);
-
- /*
- * Tx any packets in the queue
- */
- ret = rte_eth_tx_burst(
- ports[0],
- (uint16_t)tx_q->txq_id,
- (struct rte_mbuf **)
- tx_q->m_table,
- (uint16_t)tx_q->len);
- if (unlikely(ret < tx_q->len)) {
- do {
- rte_pktmbuf_free(
- tx_q->m_table[ret]);
- } while (++ret < tx_q->len);
- }
- tx_q->len = 0;
-
- txmbuf_clean_zcp(dev,
- &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
- }
- }
- dev_ll = dev_ll->next;
- }
- prev_tsc = cur_tsc;
- }
-
- rte_prefetch0(lcore_ll->ll_root_used);
-
- /*
- * Inform the configuration core that we have exited the linked
- * list and that no devices are in use if requested.
- */
- if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
- lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
-
- /* Process devices */
- dev_ll = lcore_ll->ll_root_used;
-
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- dev = dev_ll->dev;
- if (unlikely(dev->remove)) {
- dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
- continue;
- }
-
- if (likely(dev->ready == DEVICE_RX)) {
- uint32_t index = dev->vmdq_rx_q;
- uint16_t i;
- count_in_ring
- = rte_ring_count(vpool_array[index].ring);
- uint16_t free_entries
- = (uint16_t)get_available_ring_num_zcp(dev);
-
- /*
- * Attach all mbufs in vpool.ring and put back
- * into vpool.pool.
- */
- for (i = 0;
- i < RTE_MIN(free_entries,
- RTE_MIN(count_in_ring, MAX_PKT_BURST));
- i++)
- attach_rxmbuf_zcp(dev);
-
- /* Handle guest RX */
- rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst,
- MAX_PKT_BURST);
-
- if (rx_count) {
- ret_count = virtio_dev_rx_zcp(dev,
- pkts_burst, rx_count);
- if (enable_stats) {
- dev_statistics[dev->device_fh].rx_total
- += rx_count;
- dev_statistics[dev->device_fh].rx
- += ret_count;
- }
- while (likely(rx_count)) {
- rx_count--;
- pktmbuf_detach_zcp(
- pkts_burst[rx_count]);
- rte_ring_sp_enqueue(
- vpool_array[index].ring,
- (void *)pkts_burst[rx_count]);
- }
- }
- }
-
- if (likely(!dev->remove))
- /* Handle guest TX */
- virtio_dev_tx_zcp(dev);
-
- /* Move to the next device in the list */
- dev_ll = dev_ll->next;
- }
- }
-
- return 0;
-}
-
-
-/*
- * Add an entry to a used linked list. A free entry must first be found
- * in the free linked list using get_data_ll_free_entry();
- */
-static void
-add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- /* Set next as NULL and use a compiler barrier to avoid reordering. */
- ll_dev->next = NULL;
- rte_compiler_barrier();
-
- /* If ll == NULL then this is the first device. */
- if (ll) {
- /* Increment to the tail of the linked list. */
- while ((ll->next != NULL) )
- ll = ll->next;
-
- ll->next = ll_dev;
- } else {
- *ll_root_addr = ll_dev;
- }
-}
-
-/*
- * Remove an entry from a used linked list. The entry must then be added to
- * the free linked list using put_data_ll_free_entry().
- */
-static void
-rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev,
- struct virtio_net_data_ll *ll_dev_last)
-{
- struct virtio_net_data_ll *ll = *ll_root_addr;
-
- if (unlikely((ll == NULL) || (ll_dev == NULL)))
- return;
-
- if (ll_dev == ll)
- *ll_root_addr = ll_dev->next;
- else
- if (likely(ll_dev_last != NULL))
- ll_dev_last->next = ll_dev->next;
- else
- RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
-}
-
-/*
- * Find and return an entry from the free linked list.
- */
-static struct virtio_net_data_ll *
-get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
- struct virtio_net_data_ll *ll_dev;
-
- if (ll_free == NULL)
- return NULL;
-
- ll_dev = ll_free;
- *ll_root_addr = ll_free->next;
-
- return ll_dev;
-}
-
-/*
- * Place an entry back on to the free linked list.
- */
-static void
-put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
- struct virtio_net_data_ll *ll_dev)
-{
- struct virtio_net_data_ll *ll_free = *ll_root_addr;
-
- if (ll_dev == NULL)
- return;
-
- ll_dev->next = ll_free;
- *ll_root_addr = ll_dev;
-}
-
-/*
- * Creates a linked list of a given size.
- */
-static struct virtio_net_data_ll *
-alloc_data_ll(uint32_t size)
-{
- struct virtio_net_data_ll *ll_new;
- uint32_t i;
-
- /* Malloc and then chain the linked list. */
- ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
- if (ll_new == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
- return NULL;
- }
-
- for (i = 0; i < size - 1; i++) {
- ll_new[i].dev = NULL;
- ll_new[i].next = &ll_new[i+1];
- }
- ll_new[i].next = NULL;
-
- return (ll_new);
-}
-
-/*
- * Create the main linked list along with each individual cores linked list. A used and a free list
- * are created to manage entries.
- */
-static int
-init_data_ll (void)
-{
- int lcore;
-
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
- if (lcore_info[lcore].lcore_ll == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
- return -1;
- }
-
- lcore_info[lcore].lcore_ll->device_num = 0;
- lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
- lcore_info[lcore].lcore_ll->ll_root_used = NULL;
- if (num_devices % num_switching_cores)
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
- else
- lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
- }
-
- /* Allocate devices up to a maximum of MAX_DEVICES. */
- ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
-
- return 0;
-}
-
-/*
- * Set virtqueue flags so that we do not receive interrupts.
- */
-static void
-set_irq_status (struct virtio_net *dev)
-{
- dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
- dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
-}
-
-/*
- * Remove a device from the specific data core linked list and from the main linked list. Synchonization
- * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
- * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
- */
-static void
-destroy_device (volatile struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_lcore_dev_cur;
- struct virtio_net_data_ll *ll_main_dev_cur;
- struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
- struct virtio_net_data_ll *ll_main_dev_last = NULL;
- int lcore;
-
- dev->flags &= ~VIRTIO_DEV_RUNNING;
-
- /*set the remove flag. */
- dev->remove = 1;
-
- while(dev->ready != DEVICE_SAFE_REMOVE) {
- rte_pause();
- }
-
- /* Search for entry to be removed from lcore ll */
- ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
- while (ll_lcore_dev_cur != NULL) {
- if (ll_lcore_dev_cur->dev == dev) {
- break;
- } else {
- ll_lcore_dev_last = ll_lcore_dev_cur;
- ll_lcore_dev_cur = ll_lcore_dev_cur->next;
- }
- }
-
- if (ll_lcore_dev_cur == NULL) {
- RTE_LOG(ERR, VHOST_CONFIG,
- "(%"PRIu64") Failed to find the dev to be destroy.\n",
- dev->device_fh);
- return;
- }
-
- /* Search for entry to be removed from main ll */
- ll_main_dev_cur = ll_root_used;
- ll_main_dev_last = NULL;
- while (ll_main_dev_cur != NULL) {
- if (ll_main_dev_cur->dev == dev) {
- break;
- } else {
- ll_main_dev_last = ll_main_dev_cur;
- ll_main_dev_cur = ll_main_dev_cur->next;
- }
- }
-
- /* Remove entries from the lcore and main ll. */
- rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
- rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
-
- /* Set the dev_removal_flag on each lcore. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
- }
-
- /*
- * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
- * they can no longer access the device removed from the linked lists and that the devices
- * are no longer in use.
- */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
- rte_pause();
- }
- }
-
- /* Add the entries back to the lcore and main free ll.*/
- put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
- put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
-
- /* Decrement number of device on the lcore. */
- lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
-
- if (zero_copy) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- /* Stop the RX queue. */
- if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to stop "
- "rx queue:%d\n",
- dev->device_fh,
- dev->vmdq_rx_q);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in destroy_device: Start put mbuf in "
- "mempool back to ring for RX queue: %d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In destroy_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") destroy_device: Start put mbuf in mempool "
- "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
- dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
- dev->device_fh);
-
- mbuf_destroy_zcp(vpool);
- }
-
-}
-
-/*
- * A new device is added to a data core. First the device is added to the main linked list
- * and the allocated to a specific data core.
- */
-static int
-new_device (struct virtio_net *dev)
-{
- struct virtio_net_data_ll *ll_dev;
- int lcore, core_add = 0;
- uint32_t device_num_min = num_devices;
-
- /* Add device to main ll */
- ll_dev = get_data_ll_free_entry(&ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
- "of %d devices per core has been reached\n",
- dev->device_fh, num_devices);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&ll_root_used, ll_dev);
- ll_dev->dev->vmdq_rx_q
- = ll_dev->dev->device_fh * (num_queues / num_devices);
-
- if (zero_copy) {
- uint32_t index = ll_dev->dev->vmdq_rx_q;
- uint32_t count_in_ring, i;
- struct mbuf_table *tx_q;
-
- count_in_ring = rte_ring_count(vpool_array[index].ring);
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in mempool "
- "before attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") in new_device: mbuf count in ring "
- "before attach is : %d\n",
- dev->device_fh, count_in_ring);
-
- /*
- * Attach all mbufs in vpool.ring and put back intovpool.pool.
- */
- for (i = 0; i < count_in_ring; i++)
- attach_rxmbuf_zcp(dev);
-
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "mempool after attach is: %d\n",
- dev->device_fh,
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
- "ring after attach is : %d\n",
- dev->device_fh,
- rte_ring_count(vpool_array[index].ring));
-
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- tx_q->txq_id = dev->vmdq_rx_q;
-
- if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
-
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to start "
- "rx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
-
- /* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0],
- dev->vmdq_rx_q) != 0) {
- LOG_DEBUG(VHOST_CONFIG,
- "(%"PRIu64") In new_device: Failed to "
- "stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
- }
-
- mbuf_destroy_zcp(vpool);
- return -1;
- }
-
- }
-
- /*reset ready flag*/
- dev->ready = DEVICE_MAC_LEARNING;
- dev->remove = 0;
-
- /* Find a suitable lcore to add the device. */
- RTE_LCORE_FOREACH_SLAVE(lcore) {
- if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
- device_num_min = lcore_info[lcore].lcore_ll->device_num;
- core_add = lcore;
- }
- }
- /* Add device to lcore ll */
- ll_dev->dev->coreid = core_add;
- ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
- if (ll_dev == NULL) {
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
- dev->ready = DEVICE_SAFE_REMOVE;
- destroy_device(dev);
- return -1;
- }
- ll_dev->dev = dev;
- add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
-
- /* Initialize device stats */
- memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
-
- /* Disable notifications. */
- set_irq_status(dev);
- lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
- dev->flags |= VIRTIO_DEV_RUNNING;
-
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
-
- return 0;
-}
-
-/*
- * These callback allow devices to be added to the data core when configuration
- * has been fully complete.
- */
-static const struct virtio_net_device_ops virtio_net_device_ops =
-{
- .new_device = new_device,
- .destroy_device = destroy_device,
-};
-
-/*
- * This is a thread will wake up after a period to print stats if the user has
- * enabled them.
- */
-static void
-print_stats(void)
-{
- struct virtio_net_data_ll *dev_ll;
- uint64_t tx_dropped, rx_dropped;
- uint64_t tx, tx_total, rx, rx_total;
- uint32_t device_fh;
- const char clr[] = { 27, '[', '2', 'J', '\0' };
- const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
-
- while(1) {
- sleep(enable_stats);
-
- /* Clear screen and move to top left */
- printf("%s%s", clr, top_left);
-
- printf("\nDevice statistics ====================================");
-
- dev_ll = ll_root_used;
- while (dev_ll != NULL) {
- device_fh = (uint32_t)dev_ll->dev->device_fh;
- tx_total = dev_statistics[device_fh].tx_total;
- tx = dev_statistics[device_fh].tx;
- tx_dropped = tx_total - tx;
- if (zero_copy == 0) {
- rx_total = rte_atomic64_read(
- &dev_statistics[device_fh].rx_total_atomic);
- rx = rte_atomic64_read(
- &dev_statistics[device_fh].rx_atomic);
- } else {
- rx_total = dev_statistics[device_fh].rx_total;
- rx = dev_statistics[device_fh].rx;
- }
- rx_dropped = rx_total - rx;
-
- printf("\nStatistics for device %"PRIu32" ------------------------------"
- "\nTX total: %"PRIu64""
- "\nTX dropped: %"PRIu64""
- "\nTX successful: %"PRIu64""
- "\nRX total: %"PRIu64""
- "\nRX dropped: %"PRIu64""
- "\nRX successful: %"PRIu64"",
- device_fh,
- tx_total,
- tx_dropped,
- tx,
- rx_total,
- rx_dropped,
- rx);
-
- dev_ll = dev_ll->next;
- }
- printf("\n======================================================\n");
- }
-}
-
-static void
-setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
- char *ring_name, uint32_t nb_mbuf)
-{
- uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
- vpool_array[index].pool
- = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
- MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
- rte_pktmbuf_init, NULL, socket, 0);
- if (vpool_array[index].pool != NULL) {
- vpool_array[index].ring
- = rte_ring_create(ring_name,
- rte_align32pow2(nb_mbuf + 1),
- socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
- if (likely(vpool_array[index].ring != NULL)) {
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "mempool is: %d\n",
- rte_mempool_count(vpool_array[index].pool));
- LOG_DEBUG(VHOST_CONFIG,
- "in setup_mempool_tbl: mbuf count in "
- "ring is: %d\n",
- rte_ring_count(vpool_array[index].ring));
- } else {
- rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
- ring_name);
- }
-
- /* Need consider head room. */
- vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
- } else {
- rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
- }
-}
-
-
-/*
- * Main function, does initialisation and calls the per-lcore functions. The CUSE
- * device is also registered here to handle the IOCTLs.
- */
-int
-MAIN(int argc, char *argv[])
-{
- struct rte_mempool *mbuf_pool = NULL;
- unsigned lcore_id, core_id = 0;
- unsigned nb_ports, valid_num_ports;
- int ret;
- uint8_t portid, queue_id = 0;
- static pthread_t tid;
-
- /* init EAL */
- ret = rte_eal_init(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
- argc -= ret;
- argv += ret;
-
- /* parse app arguments */
- ret = us_vhost_parse_args(argc, argv);
- if (ret < 0)
- rte_exit(EXIT_FAILURE, "Invalid argument\n");
-
- if (rte_eal_pci_probe() != 0)
- rte_exit(EXIT_FAILURE, "Error with NIC driver initialization\n");
-
- for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
- if (rte_lcore_is_enabled(lcore_id))
- lcore_ids[core_id ++] = lcore_id;
-
- if (rte_lcore_count() > RTE_MAX_LCORE)
- rte_exit(EXIT_FAILURE,"Not enough cores\n");
-
- /*set the number of swithcing cores available*/
- num_switching_cores = rte_lcore_count()-1;
-
- /* Get the number of physical ports. */
- nb_ports = rte_eth_dev_count();
- if (nb_ports > RTE_MAX_ETHPORTS)
- nb_ports = RTE_MAX_ETHPORTS;
-
- /*
- * Update the global var NUM_PORTS and global array PORTS
- * and get value of var VALID_NUM_PORTS according to system ports number
- */
- valid_num_ports = check_ports_num(nb_ports);
-
- if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
- RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
- "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
- return -1;
- }
-
- if (zero_copy == 0) {
- /* Create the mbuf pool. */
- mbuf_pool = rte_mempool_create(
- "MBUF_POOL",
- NUM_MBUFS_PER_PORT
- * valid_num_ports,
- MBUF_SIZE, MBUF_CACHE_SIZE,
- sizeof(struct rte_pktmbuf_pool_private),
- rte_pktmbuf_pool_init, NULL,
- rte_pktmbuf_init, NULL,
- rte_socket_id(), 0);
- if (mbuf_pool == NULL)
- rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
-
- for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
- vpool_array[queue_id].pool = mbuf_pool;
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- } else {
- uint32_t nb_mbuf;
- char pool_name[RTE_MEMPOOL_NAMESIZE];
- char ring_name[RTE_MEMPOOL_NAMESIZE];
-
- rx_conf_default.start_rx_per_q = (uint8_t)zero_copy;
- rx_conf_default.rx_drop_en = 0;
- tx_conf_default.start_tx_per_q = (uint8_t)zero_copy;
- nb_mbuf = num_rx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "rxmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "rxmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(), queue_id,
- pool_name, ring_name, nb_mbuf);
- }
-
- nb_mbuf = num_tx_descriptor
- + num_switching_cores * MBUF_CACHE_SIZE_ZCP
- + num_switching_cores * MAX_PKT_BURST;
-
- for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
- snprintf(pool_name, sizeof(pool_name),
- "txmbuf_pool_%u", queue_id);
- snprintf(ring_name, sizeof(ring_name),
- "txmbuf_ring_%u", queue_id);
- setup_mempool_tbl(rte_socket_id(),
- (queue_id + MAX_QUEUES),
- pool_name, ring_name, nb_mbuf);
- }
-
- if (vm2vm_mode == VM2VM_HARDWARE) {
- /* Enable VT loop back to let L2 switch to do it. */
- vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
- LOG_DEBUG(VHOST_CONFIG,
- "Enable loop back for L2 switch in vmdq.\n");
- }
- }
- /* Set log level. */
- rte_set_log_level(LOG_LEVEL);
-
- /* initialize all ports */
- for (portid = 0; portid < nb_ports; portid++) {
- /* skip ports that are not enabled */
- if ((enabled_port_mask & (1 << portid)) == 0) {
- RTE_LOG(INFO, VHOST_PORT,
- "Skipping disabled port %d\n", portid);
- continue;
- }
- if (port_init(portid) != 0)
- rte_exit(EXIT_FAILURE,
- "Cannot initialize network ports\n");
- }
-
- /* Initialise all linked lists. */
- if (init_data_ll() == -1)
- rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
-
- /* Initialize device stats */
- memset(&dev_statistics, 0, sizeof(dev_statistics));
-
- /* Enable stats if the user option is set. */
- if (enable_stats)
- pthread_create(&tid, NULL, (void*)print_stats, NULL );
-
- /* Launch all data cores. */
- if (zero_copy == 0) {
- RTE_LCORE_FOREACH_SLAVE(lcore_id) {
- rte_eal_remote_launch(switch_worker,
- mbuf_pool, lcore_id);
- }
- } else {
- uint32_t count_in_mempool, index, i;
- for (index = 0; index < 2*MAX_QUEUES; index++) {
- /* For all RX and TX queues. */
- count_in_mempool
- = rte_mempool_count(vpool_array[index].pool);
-
- /*
- * Transfer all un-attached mbufs from vpool.pool
- * to vpoo.ring.
- */
- for (i = 0; i < count_in_mempool; i++) {
- struct rte_mbuf *mbuf
- = __rte_mbuf_raw_alloc(
- vpool_array[index].pool);
- rte_ring_sp_enqueue(vpool_array[index].ring,
- (void *)mbuf);
- }
-
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in mempool at initial "
- "is: %d\n", count_in_mempool);
- LOG_DEBUG(VHOST_CONFIG,
- "in MAIN: mbuf count in ring at initial is :"
- " %d\n",
- rte_ring_count(vpool_array[index].ring));
- }
-
- RTE_LCORE_FOREACH_SLAVE(lcore_id)
- rte_eal_remote_launch(switch_worker_zcp, NULL,
- lcore_id);
- }
-
- /* Register CUSE device to handle IOCTLs. */
- ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
- if (ret != 0)
- rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
-
- init_virtio_net(&virtio_net_device_ops);
-
- /* Start CUSE session. */
- start_cuse_session_loop();
- return 0;
-
-}
-
diff --git a/lib/librte_vhost/main.h b/lib/librte_vhost/main.h
deleted file mode 100644
index c15d938..0000000
--- a/lib/librte_vhost/main.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _MAIN_H_
-#define _MAIN_H_
-
-#ifdef RTE_EXEC_ENV_BAREMETAL
-#define MAIN _main
-#else
-#define MAIN main
-#endif
-
-//#define DEBUG
-
-#ifdef DEBUG
-#define LOG_LEVEL RTE_LOG_DEBUG
-#define LOG_DEBUG(log_type, fmt, args...) do { \
- RTE_LOG(DEBUG, log_type, fmt, ##args); \
-} while (0)
-#else
-#define LOG_LEVEL RTE_LOG_INFO
-#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
-#endif
-
-/* Macros for printing using RTE_LOG */
-#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
-#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
-#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
-
-/*
- * Device linked list structure for data path.
- */
-struct virtio_net_data_ll
-{
- struct virtio_net *dev; /* Pointer to device created by configuration core. */
- struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
-};
-
-/*
- * Structure containing data core specific information.
- */
-struct lcore_ll_info
-{
- struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
- struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
- uint32_t device_num; /* Number of devices on lcore. */
- volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
-};
-
-struct lcore_info
-{
- struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
-};
-
-int MAIN(int argc, char **argv);
-#endif /* _MAIN_H_ */
diff --git a/lib/librte_vhost/rte_virtio_net.h b/lib/librte_vhost/rte_virtio_net.h
new file mode 100644
index 0000000..1a2f0dc
--- /dev/null
+++ b/lib/librte_vhost/rte_virtio_net.h
@@ -0,0 +1,161 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _VIRTIO_NET_H_
+#define _VIRTIO_NET_H_
+
+/* Used to indicate that the device is running on a data core */
+#define VIRTIO_DEV_RUNNING 1
+
+/* Backend value set by guest. */
+#define VIRTIO_DEV_STOPPED -1
+
+#define PAGE_SIZE 4096
+
+/* Enum for virtqueue management. */
+enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
+
+#define BUF_VECTOR_MAX 256
+
+/*
+ * Structure contains buffer address, length and descriptor index
+ * from vring to do scatter RX.
+*/
+struct buf_vector {
+uint64_t buf_addr;
+uint32_t buf_len;
+uint32_t desc_idx;
+};
+
+/*
+ * Structure contains variables relevant to TX/RX virtqueues.
+ */
+struct vhost_virtqueue
+{
+ struct vring_desc *desc; /* Virtqueue descriptor ring. */
+ struct vring_avail *avail; /* Virtqueue available ring. */
+ struct vring_used *used; /* Virtqueue used ring. */
+ uint32_t size; /* Size of descriptor ring. */
+ uint32_t backend; /* Backend value to determine if device should started/stopped. */
+ uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
+ volatile uint16_t last_used_idx; /* Last index used on the available ring */
+ volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
+ eventfd_t callfd; /* Currently unused as polling mode is enabled. */
+ eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
+ /* Used for scatter RX. */
+ struct buf_vector buf_vec[BUF_VECTOR_MAX];
+} __rte_cache_aligned;
+
+/*
+ * Device structure contains all configuration information relating to the device.
+ */
+struct virtio_net
+{
+ struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
+ struct virtio_memory *mem; /* QEMU memory and memory region information. */
+ struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
+ uint64_t features; /* Negotiated feature set. */
+ uint64_t device_fh; /* device identifier. */
+ uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
+ uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
+ uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
+ uint16_t coreid; /* Data core that the device is added to. */
+ volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
+ volatile uint8_t remove; /* Device is marked for removal from the data core. */
+} __rte_cache_aligned;
+
+/*
+ * Device linked list structure for configuration.
+ */
+struct virtio_net_config_ll
+{
+ struct virtio_net dev; /* Virtio device. */
+ struct virtio_net_config_ll *next; /* Next entry on linked list. */
+};
+
+/*
+ * Information relating to memory regions including offsets to addresses in QEMUs memory file.
+ */
+struct virtio_memory_regions {
+ uint64_t guest_phys_address; /* Base guest physical address of region. */
+ uint64_t guest_phys_address_end; /* End guest physical address of region. */
+ uint64_t memory_size; /* Size of region. */
+ uint64_t userspace_address; /* Base userspace address of region. */
+ uint64_t address_offset; /* Offset of region for address translation. */
+};
+
+/*
+ * Information relating to memory regions including offsets to
+ * addresses in host physical space.
+ */
+struct virtio_memory_regions_hpa {
+ /* Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /* End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /* Size of region. */
+ uint64_t memory_size;
+ /* Offset of region for gpa to hpa translation. */
+ uint64_t host_phys_addr_offset;
+};
+
+/*
+ * Memory structure includes region and mapping information.
+ */
+struct virtio_memory {
+ uint64_t base_address; /* Base QEMU userspace address of the memory file. */
+ uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
+ uint64_t mapped_size; /* Total size of memory file. */
+ uint32_t nregions; /* Number of memory regions. */
+ /* Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /* Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /* Memory region information. */
+ struct virtio_memory_regions regions[0];
+};
+
+/*
+ * Device operations to add/remove device.
+ */
+struct virtio_net_device_ops {
+ int (* new_device) (struct virtio_net *); /* Add device. */
+ void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
+};
+
+int init_virtio_net(struct virtio_net_device_ops const * const);
+int deinit_virtio_net(void);
+
+struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
+
+#endif /* _VIRTIO_NET_H_ */
diff --git a/lib/librte_vhost/vhost_rxtx.c b/lib/librte_vhost/vhost_rxtx.c
new file mode 100644
index 0000000..78fce0d
--- /dev/null
+++ b/lib/librte_vhost/vhost_rxtx.c
@@ -0,0 +1,281 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdint.h>
+#include <linux/virtio_net.h>
+
+#include <rte_mbuf.h>
+#include <rte_memcpy.h>
+#include <rte_virtio_net.h>
+
+#include "vhost-net-cdev.h"
+
+#define MAX_PKT_BURST 64
+#define MAX_MRG_PKT_BURST 64
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works when mergeable is disabled.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
+ uint64_t buff_addr = 0;
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint16_t free_entries;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ /* As many data cores may want access to available buffers, they need to be reserved. */
+ do {
+ res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ free_entries = (avail_idx - res_base_idx);
+ /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (count == 0)
+ return 0;
+
+ res_end_idx = res_base_idx + count;
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
+ res_end_idx);
+ } while (unlikely(success == 0));
+ res_cur_idx = res_base_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
+
+ /* Prefetch available ring to retrieve indexes. */
+ rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (res_cur_idx != res_end_idx) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+
+ /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ /* Copy virtio_hdr to packet and increment buffer address */
+ buff_hdr_addr = buff_addr;
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_addr += vq->vhost_hlen;
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
+
+ /* Copy mbuf data to buffer */
+ rte_memcpy((void *)(uintptr_t)buff_addr,
+ (const void *)buff->pkt.data,
+ rte_pktmbuf_data_len(buff));
+ PRINT_PACKET(dev, (uintptr_t)buff_addr,
+ rte_pktmbuf_data_len(buff), 0);
+
+ res_cur_idx++;
+ packet_success++;
+
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (res_cur_idx < res_end_idx) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ /* Wait until it's our turn to add our buffer to the used ring. */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ return count;
+}
+
+
+static inline void __attribute__((always_inline))
+virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ if (free_entries > MAX_PKT_BURST)
+ free_entries = MAX_PKT_BURST;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (packet_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[packet_success];
+ vq->used->ring[used_idx].len = 0;
+
+ /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
+ m.pkt.data_len = desc->len;
+ m.pkt.pkt_len = desc->len;
+ m.pkt.data = (void*)(uintptr_t)buff_addr;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+ virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
+
+ vq->last_used_idx++;
+ packet_success++;
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += packet_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+
diff --git a/lib/librte_vhost/virtio-net.h b/lib/librte_vhost/virtio-net.h
deleted file mode 100644
index 1a2f0dc..0000000
--- a/lib/librte_vhost/virtio-net.h
+++ /dev/null
@@ -1,161 +0,0 @@
-/*-
- * BSD LICENSE
- *
- * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- *
- * * Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * * Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in
- * the documentation and/or other materials provided with the
- * distribution.
- * * Neither the name of Intel Corporation nor the names of its
- * contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
- * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
- * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
- * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
- * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifndef _VIRTIO_NET_H_
-#define _VIRTIO_NET_H_
-
-/* Used to indicate that the device is running on a data core */
-#define VIRTIO_DEV_RUNNING 1
-
-/* Backend value set by guest. */
-#define VIRTIO_DEV_STOPPED -1
-
-#define PAGE_SIZE 4096
-
-/* Enum for virtqueue management. */
-enum {VIRTIO_RXQ, VIRTIO_TXQ, VIRTIO_QNUM};
-
-#define BUF_VECTOR_MAX 256
-
-/*
- * Structure contains buffer address, length and descriptor index
- * from vring to do scatter RX.
-*/
-struct buf_vector {
-uint64_t buf_addr;
-uint32_t buf_len;
-uint32_t desc_idx;
-};
-
-/*
- * Structure contains variables relevant to TX/RX virtqueues.
- */
-struct vhost_virtqueue
-{
- struct vring_desc *desc; /* Virtqueue descriptor ring. */
- struct vring_avail *avail; /* Virtqueue available ring. */
- struct vring_used *used; /* Virtqueue used ring. */
- uint32_t size; /* Size of descriptor ring. */
- uint32_t backend; /* Backend value to determine if device should started/stopped. */
- uint16_t vhost_hlen; /* Vhost header length (varies depending on RX merge buffers. */
- volatile uint16_t last_used_idx; /* Last index used on the available ring */
- volatile uint16_t last_used_idx_res; /* Used for multiple devices reserving buffers. */
- eventfd_t callfd; /* Currently unused as polling mode is enabled. */
- eventfd_t kickfd; /* Used to notify the guest (trigger interrupt). */
- /* Used for scatter RX. */
- struct buf_vector buf_vec[BUF_VECTOR_MAX];
-} __rte_cache_aligned;
-
-/*
- * Device structure contains all configuration information relating to the device.
- */
-struct virtio_net
-{
- struct vhost_virtqueue *virtqueue[VIRTIO_QNUM]; /* Contains all virtqueue information. */
- struct virtio_memory *mem; /* QEMU memory and memory region information. */
- struct ether_addr mac_address; /* Device MAC address (Obtained on first TX packet). */
- uint64_t features; /* Negotiated feature set. */
- uint64_t device_fh; /* device identifier. */
- uint32_t vmdq_rx_q; /* RX VMDQ queue number. */
- uint32_t flags; /* Device flags. Only used to check if device is running on data core. */
- uint32_t vlan_tag; /* Vlan tag for device. Currently set to device_id (0-63). */
- uint16_t coreid; /* Data core that the device is added to. */
- volatile uint8_t ready; /* A device is set as ready if the MAC address has been set. */
- volatile uint8_t remove; /* Device is marked for removal from the data core. */
-} __rte_cache_aligned;
-
-/*
- * Device linked list structure for configuration.
- */
-struct virtio_net_config_ll
-{
- struct virtio_net dev; /* Virtio device. */
- struct virtio_net_config_ll *next; /* Next entry on linked list. */
-};
-
-/*
- * Information relating to memory regions including offsets to addresses in QEMUs memory file.
- */
-struct virtio_memory_regions {
- uint64_t guest_phys_address; /* Base guest physical address of region. */
- uint64_t guest_phys_address_end; /* End guest physical address of region. */
- uint64_t memory_size; /* Size of region. */
- uint64_t userspace_address; /* Base userspace address of region. */
- uint64_t address_offset; /* Offset of region for address translation. */
-};
-
-/*
- * Information relating to memory regions including offsets to
- * addresses in host physical space.
- */
-struct virtio_memory_regions_hpa {
- /* Base guest physical address of region. */
- uint64_t guest_phys_address;
- /* End guest physical address of region. */
- uint64_t guest_phys_address_end;
- /* Size of region. */
- uint64_t memory_size;
- /* Offset of region for gpa to hpa translation. */
- uint64_t host_phys_addr_offset;
-};
-
-/*
- * Memory structure includes region and mapping information.
- */
-struct virtio_memory {
- uint64_t base_address; /* Base QEMU userspace address of the memory file. */
- uint64_t mapped_address; /* Mapped address of memory file base in our applications memory space. */
- uint64_t mapped_size; /* Total size of memory file. */
- uint32_t nregions; /* Number of memory regions. */
- /* Number of memory regions for gpa to hpa translation. */
- uint32_t nregions_hpa;
- /* Memory region information for gpa to hpa translation. */
- struct virtio_memory_regions_hpa *regions_hpa;
- /* Memory region information. */
- struct virtio_memory_regions regions[0];
-};
-
-/*
- * Device operations to add/remove device.
- */
-struct virtio_net_device_ops {
- int (* new_device) (struct virtio_net *); /* Add device. */
- void (* destroy_device) (volatile struct virtio_net *); /* Remove device. */
-};
-
-int init_virtio_net(struct virtio_net_device_ops const * const);
-int deinit_virtio_net(void);
-
-struct vhost_net_device_ops const * get_virtio_net_callbacks(void);
-
-#endif /* _VIRTIO_NET_H_ */
--
1.8.1.4
next prev parent reply other threads:[~2014-09-26 9:40 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 9:45 [dpdk-dev] [PATCH v5 00/11] user space vhost library and vhost example Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 01/11] lib/librte_vhost: move src files in vhost example to vhost lib directory Huawei Xie
2014-09-29 19:41 ` Thomas Monjalon
2014-09-30 2:07 ` Xie, Huawei
2014-09-30 4:35 ` Thomas Monjalon
2014-09-26 9:45 ` Huawei Xie [this message]
2014-09-29 19:55 ` [dpdk-dev] [PATCH v5 02/11] lib/librte_vhost: refactor vhost lib for subsequent transform Thomas Monjalon
2014-09-29 20:00 ` Thomas Monjalon
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 03/11] lib/librte_vhost: vhost lib transform Huawei Xie
2014-09-29 19:51 ` Thomas Monjalon
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 04/11] lib/librte_vhost: merge vhost merge-able rx. merge vhost tx fix Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 05/11] lib/librte_vhost: merge Oliver's mbuf change Huawei Xie
2014-09-29 19:44 ` Thomas Monjalon
[not found] ` <C37D651A908B024F974696C65296B57B0F2AF2C0@SHSMSX101.ccr.corp.intel.com>
2014-09-30 3:41 ` Ouyang, Changchun
2014-09-30 4:46 ` Thomas Monjalon
2014-09-30 6:43 ` Xie, Huawei
2014-09-30 8:06 ` Thomas Monjalon
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 06/11] lib/librte_vhost: fixes serious coding style issues Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 07/11] lib/librte_vhost: add vhost support in DPDK makefile Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 08/11] examples/vhost: copy old vhost example src file Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 09/11] examples/vhost: vhost example based on vhost lib API Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 10/11] examples/vhost: merge oliver's mbuf changes to vhost example Huawei Xie
2014-09-26 9:45 ` [dpdk-dev] [PATCH v5 11/11] examples/vhost: add vhost example Makefile Huawei Xie
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1411724758-27488-3-git-send-email-huawei.xie@intel.com \
--to=huawei.xie@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).