DPDK patches and discussions
 help / color / mirror / Atom feed
* [dpdk-dev] [PATCH] i40e: support of link flow control
@ 2014-09-28  7:08 zzang
  2014-11-13  9:46 ` Thomas Monjalon
  0 siblings, 1 reply; 2+ messages in thread
From: zzang @ 2014-09-28  7:08 UTC (permalink / raw)
  To: dev

From: Zhida Zang <zhida.zang@intel.com>

Add support of link flow control.

Signed-off-by: Zhida Zang <zhida.zang@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
---
 lib/librte_pmd_i40e/i40e_ethdev.c | 216 +++++++++++++++++++++++++++++++++++++-
 lib/librte_pmd_i40e/i40e_ethdev.h |   1 +
 2 files changed, 214 insertions(+), 3 deletions(-)

diff --git a/lib/librte_pmd_i40e/i40e_ethdev.c b/lib/librte_pmd_i40e/i40e_ethdev.c
index a00d6ca..02abcac 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.c
+++ b/lib/librte_pmd_i40e/i40e_ethdev.c
@@ -58,6 +58,14 @@
 #include "i40e_rxtx.h"
 #include "i40e_pf.h"
 
+/* Flow control default timer */
+#define I40E_DEFAULT_PAUSE_TIME 0xFFFFU
+
+/* Flow control bit */
+#define I40E_PRTMAC_ENABLE_RX  0x00000100
+#define I40E_PRTMAC_ENABLE_TX  0x00000100
+#define I40E_PRTMAC_FWD_CTRL   0x00000001
+
 /* Maximun number of MAC addresses */
 #define I40E_NUM_MACADDR_MAX       64
 #define I40E_CLEAR_PXE_WAIT_MS     200
@@ -150,6 +158,8 @@ static void i40e_vlan_strip_queue_set(struct rte_eth_dev *dev,
 static int i40e_vlan_pvid_set(struct rte_eth_dev *dev, uint16_t pvid, int on);
 static int i40e_dev_led_on(struct rte_eth_dev *dev);
 static int i40e_dev_led_off(struct rte_eth_dev *dev);
+static int i40e_flow_ctrl_get(struct rte_eth_dev *dev,
+			      struct rte_eth_fc_conf *fc_conf);
 static int i40e_flow_ctrl_set(struct rte_eth_dev *dev,
 			      struct rte_eth_fc_conf *fc_conf);
 static int i40e_priority_flow_ctrl_set(struct rte_eth_dev *dev,
@@ -248,6 +258,7 @@ static struct eth_dev_ops i40e_eth_dev_ops = {
 	.tx_queue_release             = i40e_dev_tx_queue_release,
 	.dev_led_on                   = i40e_dev_led_on,
 	.dev_led_off                  = i40e_dev_led_off,
+	.flow_ctrl_get                = i40e_flow_ctrl_get,
 	.flow_ctrl_set                = i40e_flow_ctrl_set,
 	.priority_flow_ctrl_set       = i40e_priority_flow_ctrl_set,
 	.mac_addr_add                 = i40e_macaddr_add,
@@ -366,6 +377,7 @@ eth_i40e_dev_init(__rte_unused struct eth_driver *eth_drv,
 	pf->adapter = I40E_DEV_PRIVATE_TO_ADAPTER(dev->data->dev_private);
 	pf->adapter->eth_dev = dev;
 	pf->dev_data = dev->data;
+	pf->pause_time = I40E_DEFAULT_PAUSE_TIME;
 
 	hw->back = I40E_PF_TO_ADAPTER(pf);
 	hw->hw_addr = (uint8_t *)(pci_dev->mem_resource[0].addr);
@@ -1488,12 +1500,210 @@ i40e_dev_led_off(struct rte_eth_dev *dev)
 }
 
 static int
-i40e_flow_ctrl_set(__rte_unused struct rte_eth_dev *dev,
-		   __rte_unused struct rte_eth_fc_conf *fc_conf)
+i40e_flow_ctrl_get(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
+{
+	uint32_t mflcn_reg, fccfg_reg, rx_reg, tx_reg;
+	int rx_pause, tx_pause;
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	fc_conf->pause_time = pf->pause_time;
+
+	if (i40e_is_40G_device(hw->device_id)) {
+		rx_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_PAUSE_ENABLE);
+		tx_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_TX_PAUSE_ENABLE);
+
+		if (rx_reg & I40E_PRTMAC_ENABLE_RX)
+			rx_pause = 1;
+		else
+			rx_pause = 0;
+
+		if (tx_reg & I40E_PRTMAC_ENABLE_TX)
+			tx_pause = 1;
+		else
+			tx_pause = 0;
+	} else {
+		mflcn_reg = I40E_READ_REG(hw, I40E_PRTDCB_MFLCN);
+		if (mflcn_reg & (0x1 << I40E_PRTDCB_MFLCN_RFCE_SHIFT))
+			rx_pause = 1;
+		else
+			rx_pause = 0;
+
+		fccfg_reg = I40E_READ_REG(hw, I40E_PRTDCB_FCCFG);
+		if (fccfg_reg & (0x1 << I40E_PRTDCB_FCCFG_TFCE_SHIFT))
+			tx_pause = 1;
+		else
+			tx_pause = 0;
+	}
+
+	if (rx_pause && tx_pause)
+		fc_conf->mode = RTE_FC_FULL;
+	else if (rx_pause)
+		fc_conf->mode = RTE_FC_RX_PAUSE;
+	else if (tx_pause)
+		fc_conf->mode = RTE_FC_TX_PAUSE;
+	else
+		fc_conf->mode = RTE_FC_NONE;
+
+	return 0;
+}
+
+static int i40e_40g_fc_enable(struct i40e_hw *hw, uint16_t pause_time)
+{
+	uint32_t gpp_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GPP);
+	uint32_t ppp_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_ENABLE_PPP);
+	uint32_t gcp_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GCP);
+	uint32_t rx_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_PAUSE_ENABLE);
+	uint32_t tx_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_TX_PAUSE_ENABLE);
+
+	gpp_reg |=
+		I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GPP_HSEC_CTL_RX_ENABLE_GPP_MASK;
+	ppp_reg &=
+		~I40E_PRTMAC_HSEC_CTL_RX_ENABLE_PPP_HSEC_CTL_RX_ENABLE_PPP_MASK;
+	gcp_reg |=
+		I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GCP_HSEC_CTL_RX_ENABLE_GCP_MASK;
+
+	/* clear previous settings */
+	rx_reg &= ~I40E_PRTMAC_ENABLE_RX;
+	tx_reg &= ~I40E_PRTMAC_ENABLE_TX;
+
+	switch (hw->fc.current_mode) {
+	case I40E_FC_NONE:
+		break;
+	case I40E_FC_RX_PAUSE:
+		rx_reg |= I40E_PRTMAC_ENABLE_RX;
+		break;
+	case I40E_FC_TX_PAUSE:
+		tx_reg |= I40E_PRTMAC_ENABLE_TX;
+		break;
+	case I40E_FC_FULL:
+		rx_reg |= I40E_PRTMAC_ENABLE_RX;
+		tx_reg |= I40E_PRTMAC_ENABLE_TX;
+		break;
+	default:
+		PMD_INIT_LOG(ERR, "Flow control param set incorrectly\n");
+		return -EIO;
+	}
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GPP, gpp_reg);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_RX_ENABLE_PPP, ppp_reg);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_RX_ENABLE_GCP, gcp_reg);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_RX_PAUSE_ENABLE, rx_reg);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_TX_PAUSE_ENABLE, tx_reg);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_TX_PAUSE_REFRESH_TIMER(8),
+			pause_time / 2);
+	I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_TX_PAUSE_QUANTA(8), pause_time);
+
+	return 0;
+}
+
+static int i40e_10g_fc_enable(struct i40e_hw *hw, uint16_t pause_time)
+{
+	uint32_t mflcn_reg, fccfg_reg, reg;
+	int i;
+
+	/* Disable any previous flow control settings */
+	mflcn_reg = I40E_READ_REG(hw, I40E_PRTDCB_MFLCN);
+	mflcn_reg &= ~(I40E_PRTDCB_MFLCN_RPFCM_MASK |
+			I40E_PRTDCB_MFLCN_RFCE_MASK);
+
+	fccfg_reg = I40E_READ_REG(hw, I40E_PRTDCB_FCCFG);
+	fccfg_reg &= ~I40E_PRTDCB_FCCFG_TFCE_MASK;
+
+	switch (hw->fc.current_mode) {
+	case I40E_FC_NONE:
+		break;
+	case I40E_FC_RX_PAUSE:
+		mflcn_reg |= (0x1 << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
+		break;
+	case I40E_FC_TX_PAUSE:
+		fccfg_reg |= (0x1 << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
+		break;
+	case I40E_FC_FULL:
+		mflcn_reg |= (0x1 << I40E_PRTDCB_MFLCN_RFCE_SHIFT);
+		fccfg_reg |= (0x1 << I40E_PRTDCB_FCCFG_TFCE_SHIFT);
+		break;
+	default:
+		PMD_INIT_LOG(ERR, "Flow control param set incorrectly\n");
+		return -EIO;
+	}
+	mflcn_reg |= (0x1 << I40E_PRTDCB_MFLCN_DPF_SHIFT);
+	I40E_WRITE_REG(hw, I40E_PRTDCB_MFLCN, mflcn_reg);
+	I40E_WRITE_REG(hw, I40E_PRTDCB_FCCFG, fccfg_reg);
+
+	/* Configure pause time (2 TCs per register) */
+	reg = (uint32_t)pause_time * (uint32_t)0x00010001;
+	for (i = 0; i < 4; i++)
+		I40E_WRITE_REG(hw, I40E_PRTDCB_FCTTVN(i), reg);
+
+	/* Configure flow control refresh threshold value */
+	I40E_WRITE_REG(hw, I40E_PRTDCB_FCRTV, pause_time / 2);
+
+	return 0;
+}
+
+static int
+i40e_flow_ctrl_set(struct rte_eth_dev *dev, struct rte_eth_fc_conf *fc_conf)
 {
+	uint32_t mflcn_reg, fctrl_reg;
+	u8 aq_failure;
+	int err;
+	enum i40e_fc_mode rte_fcmode_2_i40e_fcmode[] = {
+		I40E_FC_NONE,
+		I40E_FC_RX_PAUSE,
+		I40E_FC_TX_PAUSE,
+		I40E_FC_FULL
+	};
+	struct i40e_hw *hw = I40E_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+	struct i40e_pf *pf = I40E_DEV_PRIVATE_TO_PF(dev->data->dev_private);
+	hw->fc.requested_mode = rte_fcmode_2_i40e_fcmode[fc_conf->mode];
+	pf->pause_time = fc_conf->pause_time;
+
 	PMD_INIT_FUNC_TRACE();
 
-	return -ENOSYS;
+	err = i40e_set_fc(hw, &aq_failure, 1);
+	if (err < 0) {
+		PMD_INIT_LOG(ERR, "i40e_set_fc = %d\n", err);
+		return err;
+	}
+
+	if (i40e_is_40G_device(hw->device_id)) {
+		err = i40e_40g_fc_enable(hw, pf->pause_time);
+		if (err < 0)
+			return err;
+
+		fctrl_reg = I40E_READ_REG(hw,
+				I40E_PRTMAC_HSEC_CTL_RX_FORWARD_CONTROL);
+		if (fc_conf->mac_ctrl_frame_fwd != 0)
+			fctrl_reg |= I40E_PRTMAC_FWD_CTRL;
+		else
+			fctrl_reg &= ~I40E_PRTMAC_FWD_CTRL;
+
+		I40E_WRITE_REG(hw, I40E_PRTMAC_HSEC_CTL_RX_FORWARD_CONTROL,
+				fctrl_reg);
+	} else {
+		err = i40e_10g_fc_enable(hw, pf->pause_time);
+		if (err < 0)
+			return err;
+
+		mflcn_reg = I40E_READ_REG(hw, I40E_PRTDCB_MFLCN);
+		/* set or clear MFLCN.PMCF bit depending on configuration */
+		if (fc_conf->mac_ctrl_frame_fwd != 0)
+			mflcn_reg |= I40E_PRTDCB_MFLCN_PMCF_MASK;
+		else
+			mflcn_reg &= ~I40E_PRTDCB_MFLCN_PMCF_MASK;
+
+		I40E_WRITE_REG(hw, I40E_PRTDCB_MFLCN, mflcn_reg);
+	}
+
+	I40E_WRITE_FLUSH(hw);
+
+	return 0;
 }
 
 static int
diff --git a/lib/librte_pmd_i40e/i40e_ethdev.h b/lib/librte_pmd_i40e/i40e_ethdev.h
index 64deef2..676f70b 100644
--- a/lib/librte_pmd_i40e/i40e_ethdev.h
+++ b/lib/librte_pmd_i40e/i40e_ethdev.h
@@ -216,6 +216,7 @@ struct i40e_pf {
 	uint16_t vmdq_nb_qps; /* The number of queue pairs of VMDq */
 	uint16_t vf_nb_qps; /* The number of queue pairs of VF */
 	uint16_t fdir_nb_qps; /* The number of queue pairs of Flow Director */
+	uint16_t pause_time; /* Flow control pause timer */
 };
 
 enum pending_msg {
-- 
1.8.1.4

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2014-11-13  9:37 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-09-28  7:08 [dpdk-dev] [PATCH] i40e: support of link flow control zzang
2014-11-13  9:46 ` Thomas Monjalon

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).