[dpdk-dev] [PATCH v2 13/18] ixgbe: semaphore mask move into hardware physical information

[Ouyang Changchun <changchun.ouyang@intel.com>]

This patch stores lan_id and physical semaphore mask into hardware physical information,
and use them to control read and write physical registers in IXGBE base code.

Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
 lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c | 23 +++++++++++------------
 1 file changed, 11 insertions(+), 12 deletions(-)

diff --git a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
index 2e8fe93..f39df9a 100644
--- a/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
+++ b/lib/librte_pmd_ixgbe/ixgbe/ixgbe_phy.c
@@ -283,6 +283,15 @@ s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
 
 	DEBUGFUNC("ixgbe_identify_phy_generic");
 
+	if (!hw->phy.phy_semaphore_mask) {
+		hw->phy.lan_id = IXGBE_READ_REG(hw, IXGBE_STATUS) &
+						IXGBE_STATUS_LAN_ID_1;
+		if (hw->phy.lan_id)
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM;
+		else
+			hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM;
+	}
+
 	if (hw->phy.type == ixgbe_phy_unknown) {
 		for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
 			if (ixgbe_validate_phy_addr(hw, phy_addr)) {
@@ -587,15 +596,10 @@ s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 			       u32 device_type, u16 *phy_data)
 {
 	s32 status;
-	u16 gssr;
+	u32 gssr = hw->phy.phy_semaphore_mask;
 
 	DEBUGFUNC("ixgbe_read_phy_reg_generic");
 
-	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
-		gssr = IXGBE_GSSR_PHY1_SM;
-	else
-		gssr = IXGBE_GSSR_PHY0_SM;
-
 	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
 		status = ixgbe_read_phy_reg_mdi(hw, reg_addr, device_type,
 						phy_data);
@@ -693,15 +697,10 @@ s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
 				u32 device_type, u16 phy_data)
 {
 	s32 status;
-	u16 gssr;
+	u32 gssr = hw->phy.phy_semaphore_mask;
 
 	DEBUGFUNC("ixgbe_write_phy_reg_generic");
 
-	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
-		gssr = IXGBE_GSSR_PHY1_SM;
-	else
-		gssr = IXGBE_GSSR_PHY0_SM;
-
 	if (hw->mac.ops.acquire_swfw_sync(hw, gssr) == IXGBE_SUCCESS) {
 		status = ixgbe_write_phy_reg_mdi(hw, reg_addr, device_type,
 						 phy_data);
-- 
1.8.4.2