DPDK patches and discussions
 help / color / mirror / Atom feed
From: Alan Carew <alan.carew@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 03/10] CPU Frequency Power Management(Host).
Date: Sun, 12 Oct 2014 20:36:04 +0100
Message-ID: <1413142571-23069-4-git-send-email-alan.carew@intel.com> (raw)
In-Reply-To: <1413142571-23069-1-git-send-email-alan.carew@intel.com>

A wrapper around librte_power(using ACPI cpufreq), providing locking around the
non-threadsafe library, allowing for frequency changes based on core masks and
core numbers from both the CLI thread and epoll monitor thread.

Signed-off-by: Alan Carew <alan.carew@intel.com>
---
 examples/vm_power_manager/power_manager.c | 244 ++++++++++++++++++++++++++++++
 examples/vm_power_manager/power_manager.h | 188 +++++++++++++++++++++++
 2 files changed, 432 insertions(+)
 create mode 100644 examples/vm_power_manager/power_manager.c
 create mode 100644 examples/vm_power_manager/power_manager.h

diff --git a/examples/vm_power_manager/power_manager.c b/examples/vm_power_manager/power_manager.c
new file mode 100644
index 0000000..b7b1fca
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.c
@@ -0,0 +1,244 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdint.h>
+#include <inttypes.h>
+#include <sys/un.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <dirent.h>
+#include <errno.h>
+
+#include <sys/types.h>
+
+#include <rte_config.h>
+#include <rte_log.h>
+#include <rte_power.h>
+#include <rte_spinlock.h>
+
+#include "power_manager.h"
+
+#define RTE_LOGTYPE_POWER_MANAGER RTE_LOGTYPE_USER1
+
+#define POWER_SCALE_CORE(DIRECTION, core_num , ret) do { \
+	if (core_num >= POWER_MGR_MAX_CPUS) \
+		return -1; \
+	if (!(global_enabled_cpus & (1ULL << core_num))) \
+		return -1; \
+	rte_spinlock_lock(&global_core_freq_info[core_num].power_sl); \
+	ret = rte_power_freq_##DIRECTION(core_num); \
+	rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl); \
+} while (0)
+
+#define POWER_SCALE_MASK(DIRECTION, core_mask, ret) do { \
+	int i; \
+	for (i = 0; core_mask; core_mask &= ~(1 << i++)) { \
+		if ((core_mask >> i) & 1) { \
+			if (!(global_enabled_cpus & (1ULL << i))) \
+			continue; \
+		rte_spinlock_lock(&global_core_freq_info[i].power_sl); \
+		if (rte_power_freq_##DIRECTION(i) != 1) \
+			ret = -1; \
+		rte_spinlock_unlock(&global_core_freq_info[i].power_sl); \
+		} \
+	} \
+} while (0)
+
+struct freq_info {
+	rte_spinlock_t power_sl;
+	uint32_t freqs[RTE_MAX_LCORE_FREQS];
+	unsigned num_freqs;
+} __rte_cache_aligned;
+
+static struct freq_info global_core_freq_info[POWER_MGR_MAX_CPUS];
+
+static uint64_t global_enabled_cpus;
+
+#define SYSFS_CPU_PATH "/sys/devices/system/cpu/cpu%u/topology/core_id"
+
+static unsigned
+set_host_cpus_mask(void)
+{
+	char path[PATH_MAX];
+	unsigned i;
+	unsigned num_cpus = 0;
+	for (i = 0; i < POWER_MGR_MAX_CPUS; i++) {
+		snprintf(path, sizeof(path), SYSFS_CPU_PATH, i);
+		if (access(path, F_OK) == 0) {
+			global_enabled_cpus |= 1ULL << i;
+			num_cpus++;
+		} else
+			return num_cpus;
+	}
+	return num_cpus;
+}
+
+int
+power_manager_init(void)
+{
+	unsigned i, num_cpus;
+	uint64_t cpu_mask;
+	int ret = 0;
+
+	num_cpus = set_host_cpus_mask();
+	if (num_cpus == 0) {
+		RTE_LOG(ERR, POWER_MANAGER, "Unable to detected host CPUs, please "
+				"ensure that sufficient privileges exist to inspect sysfs\n");
+		return -1;
+	}
+	rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+	cpu_mask = global_enabled_cpus;
+	for (i = 0; cpu_mask; cpu_mask &= ~(1 << i++)) {
+		if (rte_power_init(i) < 0 || rte_power_freqs(i,
+				global_core_freq_info[i].freqs,
+				RTE_MAX_LCORE_FREQS) == 0) {
+			RTE_LOG(ERR, POWER_MANAGER, "Unable to initialize power manager "
+					"for core %u\n", i);
+			global_enabled_cpus &= ~(1 << i);
+			num_cpus--;
+			ret = -1;
+		}
+		rte_spinlock_init(&global_core_freq_info[i].power_sl);
+	}
+	RTE_LOG(INFO, POWER_MANAGER, "Detected %u host CPUs , enabled core mask:"
+					" 0x%"PRIx64"\n", num_cpus, global_enabled_cpus);
+	return ret;
+
+}
+
+uint32_t
+power_manager_get_current_frequency(unsigned core_num)
+{
+	uint32_t freq, index;
+
+	if (core_num >= POWER_MGR_MAX_CPUS) {
+		RTE_LOG(ERR, POWER_MANAGER, "Core(%u) is out of range 0...%d\n",
+				core_num, POWER_MGR_MAX_CPUS-1);
+		return -1;
+	}
+	if (!(global_enabled_cpus & (1ULL << core_num)))
+		return 0;
+
+	rte_spinlock_lock(&global_core_freq_info[core_num].power_sl);
+	index = rte_power_get_freq(core_num);
+	rte_spinlock_unlock(&global_core_freq_info[core_num].power_sl);
+	if (index >= POWER_MGR_MAX_CPUS)
+		freq = 0;
+	else
+		freq = global_core_freq_info[core_num].freqs[index];
+
+	return freq;
+}
+
+int
+power_manager_exit(void)
+{
+	unsigned int i;
+	int ret = 0;
+
+	for (i = 0; global_enabled_cpus; global_enabled_cpus &= ~(1 << i++)) {
+		if (rte_power_exit(i) < 0) {
+			RTE_LOG(ERR, POWER_MANAGER, "Unable to shutdown power manager "
+					"for core %u\n", i);
+			ret = -1;
+		}
+	}
+	global_enabled_cpus = 0;
+	return ret;
+}
+
+int
+power_manager_scale_mask_up(uint64_t core_mask)
+{
+	int ret = 0;
+	POWER_SCALE_MASK(up, core_mask, ret);
+	return ret;
+}
+
+int
+power_manager_scale_mask_down(uint64_t core_mask)
+{
+	int ret = 0;
+	POWER_SCALE_MASK(down, core_mask, ret);
+	return ret;
+}
+
+int
+power_manager_scale_mask_min(uint64_t core_mask)
+{
+	int ret = 0;
+	POWER_SCALE_MASK(min, core_mask, ret);
+	return ret;
+}
+
+int
+power_manager_scale_mask_max(uint64_t core_mask)
+{
+	int ret = 0;
+	POWER_SCALE_MASK(max, core_mask, ret);
+	return ret;
+}
+
+int
+power_manager_scale_core_up(unsigned core_num)
+{
+	int ret = 0;
+	POWER_SCALE_CORE(up, core_num, ret);
+	return ret;
+}
+
+int
+power_manager_scale_core_down(unsigned core_num)
+{
+	int ret = 0;
+	POWER_SCALE_CORE(down, core_num, ret);
+	return ret;
+}
+
+int
+power_manager_scale_core_min(unsigned core_num)
+{
+	int ret = 0;
+	POWER_SCALE_CORE(min, core_num, ret);
+	return ret;
+}
+
+int
+power_manager_scale_core_max(unsigned core_num)
+{
+	int ret = 0;
+	POWER_SCALE_CORE(max, core_num, ret);
+	return ret;
+}
diff --git a/examples/vm_power_manager/power_manager.h b/examples/vm_power_manager/power_manager.h
new file mode 100644
index 0000000..1b45bab
--- /dev/null
+++ b/examples/vm_power_manager/power_manager.h
@@ -0,0 +1,188 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef POWER_MANAGER_H_
+#define POWER_MANAGER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Maximum number of CPUS to manage */
+#define POWER_MGR_MAX_CPUS 64
+/**
+ * Initialize power management.
+ * Initializes resources and verifies the number of CPUs on the system.
+ * Wraps librte_power int rte_power_init(unsigned lcore_id);
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int power_manager_init(void);
+
+/**
+ * Exit power management. Must be called prior to exiting the application.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int power_manager_exit(void);
+
+/**
+ * Scale up the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ *  The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int power_manager_scale_mask_up(uint64_t core_mask);
+
+/**
+ * Scale down the frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ *  The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int power_manager_scale_mask_down(uint64_t core_mask);
+
+/**
+ * Scale to the minimum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ *  The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int power_manager_scale_mask_min(uint64_t core_mask);
+
+/**
+ * Scale to the maximum frequency of the cores specified in core_mask.
+ * It is thread-safe.
+ *
+ * @param core_mask
+ *  The uint64_t bit-mask of cores to change frequency.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int power_manager_scale_mask_max(uint64_t core_mask);
+
+/**
+ * Scale up frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ *  The core number to change frequency
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int power_manager_scale_core_up(unsigned core_num);
+
+/**
+ * Scale down frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ *  The core number to change frequency
+ *
+ * @return
+ *  - 1 on success.
+ *  - 0 if frequency not changed.
+ *  - Negative on error.
+ */
+int power_manager_scale_core_down(unsigned core_num);
+
+/**
+ * Scale to minimum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ *  The core number to change frequency
+ *
+ * @return
+ *  - 1 on success.
+ *  - 0 if frequency not changed.
+ *  - Negative on error.
+ */
+int power_manager_scale_core_min(unsigned core_num);
+
+/**
+ * Scale to maximum frequency for the core specified by core_num.
+ * It is thread-safe.
+ *
+ * @param core_num
+ *  The core number to change frequency
+ *
+ * @return
+ *  - 1 on success.
+ *  - 0 if frequency not changed.
+ *  - Negative on error.
+ */
+int power_manager_scale_core_max(unsigned core_num);
+
+/**
+ * Get the current freuency of the core specified by core_num
+ *
+ * @param core_num
+ *  The core number to get the current frequency
+ *
+ * @return
+ *  - 0  on error
+ *  - >0 for current frequency.
+ */
+uint32_t power_manager_get_current_frequency(unsigned core_num);
+
+
+#ifdef __cplusplus
+}
+#endif
+
+
+#endif /* POWER_MANAGER_H_ */
-- 
1.9.3

  parent reply	other threads:[~2014-10-12 19:28 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 04/10] " Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 05/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power " Alan Carew
2014-09-22 19:17   ` Neil Horman
2014-09-23  7:48     ` Carew, Alan
2014-09-22 18:34 ` [dpdk-dev] [PATCH 07/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 08/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 09/10] VM Power Management Unit Tests(Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 10/10] VM Power Management CLI(Guest) Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 04/10] VM Power Management application and Makefile Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 05/10] VM Power Management CLI(Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host Alan Carew
2014-09-25 10:10     ` Neil Horman
2014-09-25 17:06       ` Carew, Alan
2014-09-25 17:49         ` Neil Horman
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 10/10] VM Power Management Unit Tests Alan Carew
2014-09-25  2:56   ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Liu, Yong
2014-09-29 15:18   ` [dpdk-dev] [PATCH v3 " Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 04/10] VM Power Management application and Makefile Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 05/10] VM Power Management CLI(Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 07/10] librte_power common interface for Guest and Host Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 10/10] VM Power Management Unit Tests Alan Carew
2014-09-29 17:29     ` [dpdk-dev] [PATCH v3 00/10] VM Power Management Neil Horman
2014-10-12 19:36     ` [dpdk-dev] [PATCH v4 " Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 02/10] VM Power Management CLI(Host) Alan Carew
2014-10-12 19:36       ` Alan Carew [this message]
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 04/10] VM Power Management application and Makefile Alan Carew
2014-10-16 18:28         ` De Lara Guarch, Pablo
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 05/10] VM Power Management CLI(Guest) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 07/10] librte_power common interface for Guest and Host Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 10/10] VM Power Management Unit Tests Alan Carew
2014-10-13  6:17       ` [dpdk-dev] [PATCH v4 00/10] VM Power Management Liu, Yong
2014-10-13 20:26       ` Thomas Monjalon
2014-10-14 12:37         ` Carew, Alan
2014-10-14 15:03           ` Thomas Monjalon
2014-10-16 15:21             ` Carew, Alan
2014-10-28 15:21               ` Thomas Monjalon
2014-11-10  9:05                 ` Carew, Alan
2014-11-10 17:54                   ` O'driscoll, Tim
2014-11-21 23:51                     ` Zhu, Heqing
2014-11-22 17:17                     ` Vincent JARDIN
2014-12-09 17:35                       ` Paolo Bonzini
2014-12-11 23:18                         ` Thomas Monjalon
2014-12-12 13:00                           ` Carew, Alan
2014-12-12 14:50                             ` Paolo Bonzini
2014-12-12 16:10                               ` Thomas Monjalon
2014-12-12 16:13                                 ` Paolo Bonzini
2014-11-21 17:42       ` [dpdk-dev] [PATCH v5 00/10] Virtual Machine " Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 01/10] Channel Manager and Monitor for VM Power Management(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 02/10] VM Power Management CLI(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 03/10] CPU Frequency Power Management(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 04/10] VM Power Management application and Makefile Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 05/10] VM Power Management CLI(Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 06/10] VM communication channels for VM Power Management(Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 07/10] librte_power common interface for Guest and Host Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 08/10] Packet format for VM Power Management(Host and Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 09/10] Build system integration for VM Power Management(Guest and Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 10/10] VM Power Management Unit Tests Pablo de Lara
2014-11-25 16:18         ` [dpdk-dev] [PATCH v6 00/10] Virtual Machine Power Management Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 01/10] Channel Manager and Monitor for VM Power Management(Host) Pablo de Lara
2014-11-29 15:21             ` Neil Horman
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 02/10] VM Power Management CLI(Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 03/10] CPU Frequency Power Management(Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 04/10] VM Power Management application and Makefile Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 05/10] VM Power Management CLI(Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 06/10] VM communication channels for VM Power Management(Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 07/10] librte_power common interface for Guest and Host Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 08/10] Packet format for VM Power Management(Host and Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 09/10] Build system integration for VM Power Management(Guest and Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 10/10] VM Power Management Unit Tests Pablo de Lara
2014-11-26 16:41           ` [dpdk-dev] [PATCH v6 00/10] Virtual Machine Power Management Thomas Monjalon
2014-11-10  9:19     ` [dpdk-dev] [PATCH v2] librte_cmdline: FreeBSD Fix oveflow when size of command result structure is greater than BUFSIZ Alan Carew
2014-12-05 14:16       ` Olivier MATZ
2014-12-05 14:19         ` [dpdk-dev] [PATCH v3] " Olivier Matz
2014-12-05 15:51           ` Bruce Richardson
2014-12-05 15:58             ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413142571-23069-4-git-send-email-alan.carew@intel.com \
    --to=alan.carew@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git