DPDK patches and discussions
 help / color / mirror / Atom feed
From: Alan Carew <alan.carew@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v4 07/10] librte_power common interface for Guest and Host
Date: Sun, 12 Oct 2014 20:36:08 +0100
Message-ID: <1413142571-23069-8-git-send-email-alan.carew@intel.com> (raw)
In-Reply-To: <1413142571-23069-1-git-send-email-alan.carew@intel.com>

Moved the current librte_power implementation to rte_power_acpi_cpufreq, with
renaming of functions only.
Added rte_power_kvm_vm implmentation to support Power Management from a VM.

librte_power now hides the implementation based on the environment used.
A new call rte_power_set_env() can explicidly set the environment, if not
called then auto-detection takes place.

rte_power_kvm_vm is subset of the librte_power APIs, the following is supported:
 rte_power_init(unsigned lcore_id)
 rte_power_exit(unsigned lcore_id)
 rte_power_freq_up(unsigned lcore_id)
 rte_power_freq_down(unsigned lcore_id)
 rte_power_freq_min(unsigned lcore_id)
 rte_power_freq_max(unsigned lcore_id)

The other unsupported APIs return -ENOTSUP

Signed-off-by: Alan Carew <alan.carew@intel.com>
---
 lib/librte_power/rte_power.c              | 540 ++++-------------------------
 lib/librte_power/rte_power.h              | 120 +++++--
 lib/librte_power/rte_power_acpi_cpufreq.c | 545 ++++++++++++++++++++++++++++++
 lib/librte_power/rte_power_acpi_cpufreq.h | 192 +++++++++++
 lib/librte_power/rte_power_common.h       |  39 +++
 lib/librte_power/rte_power_kvm_vm.c       | 135 ++++++++
 lib/librte_power/rte_power_kvm_vm.h       | 179 ++++++++++
 7 files changed, 1248 insertions(+), 502 deletions(-)
 create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.c
 create mode 100644 lib/librte_power/rte_power_acpi_cpufreq.h
 create mode 100644 lib/librte_power/rte_power_common.h
 create mode 100644 lib/librte_power/rte_power_kvm_vm.c
 create mode 100644 lib/librte_power/rte_power_kvm_vm.h

diff --git a/lib/librte_power/rte_power.c b/lib/librte_power/rte_power.c
index 856da9a..998ed1c 100644
--- a/lib/librte_power/rte_power.c
+++ b/lib/librte_power/rte_power.c
@@ -31,515 +31,113 @@
  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-#include <stdio.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
-#include <stdlib.h>
-#include <string.h>
-#include <unistd.h>
-#include <signal.h>
-#include <limits.h>
-
-#include <rte_memcpy.h>
 #include <rte_atomic.h>
 
 #include "rte_power.h"
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
 
-#ifdef RTE_LIBRTE_POWER_DEBUG
-#define POWER_DEBUG_TRACE(fmt, args...) do { \
-		RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
-	} while (0)
-#else
-#define POWER_DEBUG_TRACE(fmt, args...)
-#endif
-
-#define FOPEN_OR_ERR_RET(f, retval) do { \
-	if ((f) == NULL) { \
-		RTE_LOG(ERR, POWER, "File not openned\n"); \
-		return (retval); \
-	} \
-} while(0)
-
-#define FOPS_OR_NULL_GOTO(ret, label) do { \
-	if ((ret) == NULL) { \
-		RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
-		goto label; \
-	} \
-} while(0)
-
-#define FOPS_OR_ERR_GOTO(ret, label) do { \
-	if ((ret) < 0) { \
-		RTE_LOG(ERR, POWER, "File operations failed\n"); \
-		goto label; \
-	} \
-} while(0)
-
-#define STR_SIZE     1024
-#define POWER_CONVERT_TO_DECIMAL 10
+enum power_management_env global_default_env = PM_ENV_NOT_SET;
 
-#define POWER_GOVERNOR_USERSPACE "userspace"
-#define POWER_SYSFILE_GOVERNOR   \
-	"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
-#define POWER_SYSFILE_AVAIL_FREQ \
-	"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
-#define POWER_SYSFILE_SETSPEED   \
-	"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+volatile uint32_t global_env_cfg_status = 0;
 
-enum power_state {
-	POWER_IDLE = 0,
-	POWER_ONGOING,
-	POWER_USED,
-	POWER_UNKNOWN
-};
+/* function pointers */
+rte_power_freqs_t rte_power_freqs  = NULL;
+rte_power_get_freq_t rte_power_get_freq = NULL;
+rte_power_set_freq_t rte_power_set_freq = NULL;
+rte_power_freq_change_t rte_power_freq_up = NULL;
+rte_power_freq_change_t rte_power_freq_down = NULL;
+rte_power_freq_change_t rte_power_freq_max = NULL;
+rte_power_freq_change_t rte_power_freq_min = NULL;
 
-/**
- * Power info per lcore.
- */
-struct rte_power_info {
-	unsigned lcore_id;                   /**< Logical core id */
-	uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
-	uint32_t nb_freqs;                   /**< number of available freqs */
-	FILE *f;                             /**< FD of scaling_setspeed */
-	char governor_ori[32];               /**< Original governor name */
-	uint32_t curr_idx;                   /**< Freq index in freqs array */
-	volatile uint32_t state;             /**< Power in use state */
-} __rte_cache_aligned;
-
-static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
-
-/**
- * It is to set specific freq for specific logical core, according to the index
- * of supported frequencies.
- */
-static int
-set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+int
+rte_power_set_env(enum power_management_env env)
 {
-	if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
-		RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
-			"should be less than %u\n", idx, pi->nb_freqs);
-		return -1;
-	}
-
-	/* Check if it is the same as current */
-	if (idx == pi->curr_idx)
+	if (rte_atomic32_cmpset(&global_env_cfg_status, 0, 1) == 0) {
 		return 0;
-
-	POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
-				idx, pi->freqs[idx], pi->lcore_id);
-	if (fseek(pi->f, 0, SEEK_SET) < 0) {
-		RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
-			"for setting frequency for lcore %u\n", pi->lcore_id);
-		return -1;
 	}
-	if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
-		RTE_LOG(ERR, POWER, "Fail to write new frequency for "
-					"lcore %u\n", pi->lcore_id);
+	if (env == PM_ENV_ACPI_CPUFREQ) {
+		rte_power_freqs = rte_power_acpi_cpufreq_freqs;
+		rte_power_get_freq = rte_power_acpi_cpufreq_get_freq;
+		rte_power_set_freq = rte_power_acpi_cpufreq_set_freq;
+		rte_power_freq_up = rte_power_acpi_cpufreq_freq_up;
+		rte_power_freq_down = rte_power_acpi_cpufreq_freq_down;
+		rte_power_freq_min = rte_power_acpi_cpufreq_freq_min;
+		rte_power_freq_max = rte_power_acpi_cpufreq_freq_max;
+	} else if (env == PM_ENV_KVM_VM) {
+		rte_power_freqs = rte_power_kvm_vm_freqs;
+		rte_power_get_freq = rte_power_kvm_vm_get_freq;
+		rte_power_set_freq = rte_power_kvm_vm_set_freq;
+		rte_power_freq_up = rte_power_kvm_vm_freq_up;
+		rte_power_freq_down = rte_power_kvm_vm_freq_down;
+		rte_power_freq_min = rte_power_kvm_vm_freq_min;
+		rte_power_freq_max = rte_power_kvm_vm_freq_max;
+	} else {
+		RTE_LOG(ERR, POWER, "Invalid Power Management Environment(%d) set\n",
+				env);
+		rte_power_unset_env();
 		return -1;
 	}
-	fflush(pi->f);
-	pi->curr_idx = idx;
-
-	return 1;
-}
-
-/**
- * It is to check the current scaling governor by reading sys file, and then
- * set it into 'userspace' if it is not by writing the sys file. The original
- * governor will be saved for rolling back.
- */
-static int
-power_set_governor_userspace(struct rte_power_info *pi)
-{
-	FILE *f;
-	int ret = -1;
-	char buf[BUFSIZ];
-	char fullpath[PATH_MAX];
-	char *s;
-	int val;
-
-	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
-							pi->lcore_id);
-	f = fopen(fullpath, "rw+");
-	FOPEN_OR_ERR_RET(f, ret);
-
-	s = fgets(buf, sizeof(buf), f);
-	FOPS_OR_NULL_GOTO(s, out);
-
-	/* Check if current governor is userspace */
-	if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
-		sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
-		ret = 0;
-		POWER_DEBUG_TRACE("Power management governor of lcore %u is "
-					"already userspace\n", pi->lcore_id);
-		goto out;
-	}
-	/* Save the original governor */
-	snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
-
-	/* Write 'userspace' to the governor */
-	val = fseek(f, 0, SEEK_SET);
-	FOPS_OR_ERR_GOTO(val, out);
-
-	val = fputs(POWER_GOVERNOR_USERSPACE, f);
-	FOPS_OR_ERR_GOTO(val, out);
-
-	ret = 0;
-	RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
-			"set to user space successfully\n", pi->lcore_id);
-out:
-	fclose(f);
+	global_default_env = env;
+	return 0;
 
-	return ret;
 }
 
-/**
- * It is to get the available frequencies of the specific lcore by reading the
- * sys file.
- */
-static int
-power_get_available_freqs(struct rte_power_info *pi)
+void
+rte_power_unset_env(void)
 {
-	FILE *f;
-	int ret = -1, i, count;
-	char *p;
-	char buf[BUFSIZ];
-	char fullpath[PATH_MAX];
-	char *freqs[RTE_MAX_LCORE_FREQS];
-	char *s;
-
-	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
-								pi->lcore_id);
-	f = fopen(fullpath, "r");
-	FOPEN_OR_ERR_RET(f, ret);
-
-	s = fgets(buf, sizeof(buf), f);
-	FOPS_OR_NULL_GOTO(s, out);
-
-	/* Strip the line break if there is */
-	p = strchr(buf, '\n');
-	if (p != NULL)
-		*p = 0;
-
-	/* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
-	count = rte_strsplit(buf, sizeof(buf), freqs,
-				RTE_MAX_LCORE_FREQS, ' ');
-	if (count <= 0) {
-		RTE_LOG(ERR, POWER, "No available frequency in "
-			""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
-		goto out;
-	}
-	if (count >= RTE_MAX_LCORE_FREQS) {
-		RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
-								count);
-		goto out;
-	}
-
-	/* Store the available frequncies into power context */
-	for (i = 0, pi->nb_freqs = 0; i < count; i++) {
-		POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
-								i, freqs[i]);
-		pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
-					POWER_CONVERT_TO_DECIMAL);
-	}
-
-	ret = 0;
-	POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
-						count, pi->lcore_id);
-out:
-	fclose(f);
-
-	return ret;
+	if (rte_atomic32_cmpset(&global_env_cfg_status, 1, 0) != 0)
+		global_default_env = PM_ENV_NOT_SET;
 }
 
-/**
- * It is to fopen the sys file for the future setting the lcore frequency.
- */
-static int
-power_init_for_setting_freq(struct rte_power_info *pi)
-{
-	FILE *f;
-	char fullpath[PATH_MAX];
-	char buf[BUFSIZ];
-	uint32_t i, freq;
-	char *s;
-
-	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
-							pi->lcore_id);
-	f = fopen(fullpath, "rw+");
-	FOPEN_OR_ERR_RET(f, -1);
-
-	s = fgets(buf, sizeof(buf), f);
-	FOPS_OR_NULL_GOTO(s, out);
-
-	freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
-	for (i = 0; i < pi->nb_freqs; i++) {
-		if (freq == pi->freqs[i]) {
-			pi->curr_idx = i;
-			pi->f = f;
-			return 0;
-		}
-	}
-
-out:
-	fclose(f);
-
-	return -1;
+enum power_management_env
+rte_power_get_env(void) {
+	return global_default_env;
 }
 
 int
 rte_power_init(unsigned lcore_id)
 {
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
-					lcore_id, RTE_MAX_LCORE - 1U);
-		return -1;
-	}
-
-	pi = &lcore_power_info[lcore_id];
-	if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
-								== 0) {
-		RTE_LOG(INFO, POWER, "Power management of lcore %u is "
-						"in use\n", lcore_id);
-		return -1;
-	}
-
-	pi->lcore_id = lcore_id;
-	/* Check and set the governor */
-	if (power_set_governor_userspace(pi) < 0) {
-		RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
-						"userspace\n", lcore_id);
-		goto fail;
-	}
+	int ret = -1;
 
-	/* Get the available frequencies */
-	if (power_get_available_freqs(pi) < 0) {
-		RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
-						"lcore %u\n", lcore_id);
-		goto fail;
+	if (global_default_env == PM_ENV_ACPI_CPUFREQ) {
+		return rte_power_acpi_cpufreq_init(lcore_id);
 	}
-
-	/* Init for setting lcore frequency */
-	if (power_init_for_setting_freq(pi) < 0) {
-		RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
-						"lcore %u\n", lcore_id);
-		goto fail;
+	if (global_default_env == PM_ENV_KVM_VM) {
+		return rte_power_kvm_vm_init(lcore_id);
 	}
-
-	/* Set freq to max by default */
-	if (rte_power_freq_max(lcore_id) < 0) {
-		RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
-						"to max\n", lcore_id);
-		goto fail;
+	/* Auto detect Environment */
+	RTE_LOG(INFO, POWER, "Attempting to initialise ACPI cpufreq power "
+			"management...\n");
+	ret = rte_power_acpi_cpufreq_init(lcore_id);
+	if (ret == 0) {
+		rte_power_set_env(PM_ENV_ACPI_CPUFREQ);
+		goto out;
 	}
 
-	RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
-					"power manamgement\n", lcore_id);
-	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
-
-	return 0;
-
-fail:
-	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
-
-	return -1;
-}
-
-/**
- * It is to check the governor and then set the original governor back if
- * needed by writing the the sys file.
- */
-static int
-power_set_governor_original(struct rte_power_info *pi)
-{
-	FILE *f;
-	int ret = -1;
-	char buf[BUFSIZ];
-	char fullpath[PATH_MAX];
-	char *s;
-	int val;
-
-	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
-							pi->lcore_id);
-	f = fopen(fullpath, "rw+");
-	FOPEN_OR_ERR_RET(f, ret);
-
-	s = fgets(buf, sizeof(buf), f);
-	FOPS_OR_NULL_GOTO(s, out);
-
-	/* Check if the governor to be set is the same as current */
-	if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
-		ret = 0;
-		POWER_DEBUG_TRACE("Power management governor of lcore %u "
-					"has already been set to %s\n",
-					pi->lcore_id, pi->governor_ori);
+	RTE_LOG(INFO, POWER, "Attempting to initialise VM power management...\n");
+	ret = rte_power_kvm_vm_init(lcore_id);
+	if (ret == 0) {
+		rte_power_set_env(PM_ENV_KVM_VM);
 		goto out;
 	}
-
-	/* Write back the original governor */
-	val = fseek(f, 0, SEEK_SET);
-	FOPS_OR_ERR_GOTO(val, out);
-
-	val = fputs(pi->governor_ori, f);
-	FOPS_OR_ERR_GOTO(val, out);
-
-	ret = 0;
-	RTE_LOG(INFO, POWER, "Power manamgement governor of lcore %u "
-				"has been set back to %s successfully\n",
-					pi->lcore_id, pi->governor_ori);
+	RTE_LOG(ERR, POWER, "Unable to set Power Management Environment for lcore "
+			"%u\n", lcore_id);
 out:
-	fclose(f);
-
 	return ret;
 }
 
 int
 rte_power_exit(unsigned lcore_id)
 {
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
-					lcore_id, RTE_MAX_LCORE - 1U);
-		return -1;
-	}
-	pi = &lcore_power_info[lcore_id];
-	if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
-								== 0) {
-		RTE_LOG(INFO, POWER, "Power management of lcore %u is "
-						"not used\n", lcore_id);
-		return -1;
-	}
-
-	/* Close FD of setting freq */
-	fclose(pi->f);
-	pi->f = NULL;
-
-	/* Set the governor back to the original */
-	if (power_set_governor_original(pi) < 0) {
-		RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
-					"to the original\n", lcore_id);
-		goto fail;
-	}
-
-	RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
-				"'userspace' mode and been set back to the "
-						"original\n", lcore_id);
-	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
-
-	return 0;
-
-fail:
-	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+	if (global_default_env == PM_ENV_ACPI_CPUFREQ)
+		return rte_power_acpi_cpufreq_exit(lcore_id);
+	if (global_default_env == PM_ENV_KVM_VM)
+		return rte_power_kvm_vm_exit(lcore_id);
 
+	RTE_LOG(ERR, POWER, "Environment has not been set, unable to exit "
+				"gracefully\n");
 	return -1;
-}
-
-uint32_t
-rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
-{
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE || !freqs) {
-		RTE_LOG(ERR, POWER, "Invalid input parameter\n");
-		return 0;
-	}
-
-	pi = &lcore_power_info[lcore_id];
-	if (num < pi->nb_freqs) {
-		RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
-		return 0;
-	}
-	rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
-
-	return pi->nb_freqs;
-}
-
-uint32_t
-rte_power_get_freq(unsigned lcore_id)
-{
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return RTE_POWER_INVALID_FREQ_INDEX;
-	}
-
-	return lcore_power_info[lcore_id].curr_idx;
-}
-
-int
-rte_power_set_freq(unsigned lcore_id, uint32_t index)
-{
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return -1;
-	}
-
-	return set_freq_internal(&(lcore_power_info[lcore_id]), index);
-}
-
-int
-rte_power_freq_down(unsigned lcore_id)
-{
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return -1;
-	}
 
-	pi = &lcore_power_info[lcore_id];
-	if (pi->curr_idx + 1 == pi->nb_freqs)
-		return 0;
-
-	/* Frequencies in the array are from high to low. */
-	return set_freq_internal(pi, pi->curr_idx + 1);
 }
-
-int
-rte_power_freq_up(unsigned lcore_id)
-{
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return -1;
-	}
-
-	pi = &lcore_power_info[lcore_id];
-	if (pi->curr_idx == 0)
-		return 0;
-
-	/* Frequencies in the array are from high to low. */
-	return set_freq_internal(pi, pi->curr_idx - 1);
-}
-
-int
-rte_power_freq_max(unsigned lcore_id)
-{
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return -1;
-	}
-
-	/* Frequencies in the array are from high to low. */
-	return set_freq_internal(&lcore_power_info[lcore_id], 0);
-}
-
-int
-rte_power_freq_min(unsigned lcore_id)
-{
-	struct rte_power_info *pi;
-
-	if (lcore_id >= RTE_MAX_LCORE) {
-		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
-		return -1;
-	}
-
-	pi = &lcore_power_info[lcore_id];
-
-	/* Frequencies in the array are from high to low. */
-	return set_freq_internal(pi, pi->nb_freqs - 1);
-}
-
diff --git a/lib/librte_power/rte_power.h b/lib/librte_power/rte_power.h
index 9c1419e..9338069 100644
--- a/lib/librte_power/rte_power.h
+++ b/lib/librte_power/rte_power.h
@@ -48,12 +48,48 @@
 extern "C" {
 #endif
 
-#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+/* Power Management Environment State */
+enum power_management_env {PM_ENV_NOT_SET, PM_ENV_ACPI_CPUFREQ, PM_ENV_KVM_VM};
 
 /**
- * Initialize power management for a specific lcore. It will check and set the
- * governor to userspace for the lcore, get the available frequencies, and
- * prepare to set new lcore frequency.
+ * Set the default power management implementation. If this is not called prior
+ * to rte_power_init(), then auto-detect of the environment will take place.
+ * It is not thread safe.
+ *
+ * @param env
+ *  env. The environment in which to initialise Power Management for.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int rte_power_set_env(enum power_management_env env);
+
+/**
+ * Unset the global environment configuration.
+ * This can only be called after all threads have completed.
+ *
+ * @param None.
+ *
+ * @return
+ *  None.
+ */
+void rte_power_unset_env(void);
+
+/**
+ * Get the default power management implementation.
+ *
+ * @param None.
+ *
+ * @return
+ *  power_management_env The configured environment.
+ */
+enum power_management_env rte_power_get_env(void);
+
+/**
+ * Initialize power management for a specific lcore. If rte_power_set_env() has
+ * not been called then an auto-detect of the environment will start and
+ * initialise the corresponding resources.
  *
  * @param lcore_id
  *  lcore id.
@@ -65,8 +101,9 @@ extern "C" {
 int rte_power_init(unsigned lcore_id);
 
 /**
- * Exit power management on a specific lcore. It will set the governor to which
- * is before initialized.
+ * Exit power management on a specific lcore. This will call the environment
+ * dependent exit function.
+ *
  *
  * @param lcore_id
  *  lcore id.
@@ -78,11 +115,9 @@ int rte_power_init(unsigned lcore_id);
 int rte_power_exit(unsigned lcore_id);
 
 /**
- * Get the available frequencies of a specific lcore. The return value will be
- * the minimal one of the total number of available frequencies and the number
- * of buffer. The index of available frequencies used in other interfaces
- * should be in the range of 0 to this return value.
- * It should be protected outside of this function for threadsafe.
+ * Get the available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
@@ -94,12 +129,15 @@ int rte_power_exit(unsigned lcore_id);
  * @return
  *  The number of available frequencies.
  */
-uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
+typedef uint32_t (*rte_power_freqs_t)(unsigned lcore_id, uint32_t *freqs,
+		uint32_t num);
+
+extern rte_power_freqs_t rte_power_freqs;
 
 /**
- * Return the current index of available frequencies of a specific lcore. It
- * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
- * It should be protected outside of this function for threadsafe.
+ * Return the current index of available frequencies of a specific lcore.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
@@ -107,12 +145,15 @@ uint32_t rte_power_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num);
  * @return
  *  The current index of available frequencies.
  */
-uint32_t rte_power_get_freq(unsigned lcore_id);
+typedef uint32_t (*rte_power_get_freq_t)(unsigned lcore_id);
+
+extern rte_power_get_freq_t rte_power_get_freq;
 
 /**
  * Set the new frequency for a specific lcore by indicating the index of
  * available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Function pointer definition. Review each environments
+ * specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
@@ -121,70 +162,87 @@ uint32_t rte_power_get_freq(unsigned lcore_id);
  *
  * @return
  *  - 1 on success with frequency changed.
- *  - 0 on success without frequency chnaged.
+ *  - 0 on success without frequency changed.
  *  - Negative on error.
  */
-int rte_power_set_freq(unsigned lcore_id, uint32_t index);
+typedef int (*rte_power_set_freq_t)(unsigned lcore_id, uint32_t index);
+
+extern rte_power_set_freq_t rte_power_set_freq;
+
+/**
+ * Function pointer definition for generic frequency change functions. Review
+ * each environments specific documentation for usage.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency changed.
+ *  - Negative on error.
+ */
+typedef int (*rte_power_freq_change_t)(unsigned lcore_id);
 
 /**
  * Scale up the frequency of a specific lcore according to the available
  * frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
  *
  * @return
  *  - 1 on success with frequency changed.
- *  - 0 on success without frequency chnaged.
+ *  - 0 on success without frequency changed.
  *  - Negative on error.
  */
-int rte_power_freq_up(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_up;
 
 /**
  * Scale down the frequency of a specific lcore according to the available
  * frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
  *
  * @return
  *  - 1 on success with frequency changed.
- *  - 0 on success without frequency chnaged.
+ *  - 0 on success without frequency changed.
  *  - Negative on error.
  */
-int rte_power_freq_down(unsigned lcore_id);
+
+extern rte_power_freq_change_t rte_power_freq_down;
 
 /**
  * Scale up the frequency of a specific lcore to the highest according to the
  * available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage.
  *
  * @param lcore_id
  *  lcore id.
  *
  * @return
  *  - 1 on success with frequency changed.
- *  - 0 on success without frequency chnaged.
+ *  - 0 on success without frequency changed.
  *  - Negative on error.
  */
-int rte_power_freq_max(unsigned lcore_id);
+extern rte_power_freq_change_t rte_power_freq_max;
 
 /**
  * Scale down the frequency of a specific lcore to the lowest according to the
  * available frequencies.
- * It should be protected outside of this function for threadsafe.
+ * Review each environments specific documentation for usage..
  *
  * @param lcore_id
  *  lcore id.
  *
  * @return
  *  - 1 on success with frequency changed.
- *  - 0 on success without frequency chnaged.
+ *  - 0 on success without frequency changed.
  *  - Negative on error.
  */
-int rte_power_freq_min(unsigned lcore_id);
+rte_power_freq_change_t rte_power_freq_min;
 
 #ifdef __cplusplus
 }
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.c b/lib/librte_power/rte_power_acpi_cpufreq.c
new file mode 100644
index 0000000..09085c3
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.c
@@ -0,0 +1,545 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <stdio.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+#include <signal.h>
+#include <limits.h>
+
+#include <rte_memcpy.h>
+#include <rte_atomic.h>
+
+#include "rte_power_acpi_cpufreq.h"
+#include "rte_power_common.h"
+
+#ifdef RTE_LIBRTE_POWER_DEBUG
+#define POWER_DEBUG_TRACE(fmt, args...) do { \
+		RTE_LOG(ERR, POWER, "%s: " fmt, __func__, ## args); \
+} while (0)
+#else
+#define POWER_DEBUG_TRACE(fmt, args...)
+#endif
+
+#define FOPEN_OR_ERR_RET(f, retval) do { \
+		if ((f) == NULL) { \
+			RTE_LOG(ERR, POWER, "File not openned\n"); \
+			return retval; \
+		} \
+} while (0)
+
+#define FOPS_OR_NULL_GOTO(ret, label) do { \
+		if ((ret) == NULL) { \
+			RTE_LOG(ERR, POWER, "fgets returns nothing\n"); \
+			goto label; \
+		} \
+} while (0)
+
+#define FOPS_OR_ERR_GOTO(ret, label) do { \
+		if ((ret) < 0) { \
+			RTE_LOG(ERR, POWER, "File operations failed\n"); \
+			goto label; \
+		} \
+} while (0)
+
+#define STR_SIZE     1024
+#define POWER_CONVERT_TO_DECIMAL 10
+
+#define POWER_GOVERNOR_USERSPACE "userspace"
+#define POWER_SYSFILE_GOVERNOR   \
+		"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_governor"
+#define POWER_SYSFILE_AVAIL_FREQ \
+		"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_available_frequencies"
+#define POWER_SYSFILE_SETSPEED   \
+		"/sys/devices/system/cpu/cpu%u/cpufreq/scaling_setspeed"
+
+enum power_state {
+	POWER_IDLE = 0,
+	POWER_ONGOING,
+	POWER_USED,
+	POWER_UNKNOWN
+};
+
+/**
+ * Power info per lcore.
+ */
+struct rte_power_info {
+	unsigned lcore_id;                   /**< Logical core id */
+	uint32_t freqs[RTE_MAX_LCORE_FREQS]; /**< Frequency array */
+	uint32_t nb_freqs;                   /**< number of available freqs */
+	FILE *f;                             /**< FD of scaling_setspeed */
+	char governor_ori[32];               /**< Original governor name */
+	uint32_t curr_idx;                   /**< Freq index in freqs array */
+	volatile uint32_t state;             /**< Power in use state */
+} __rte_cache_aligned;
+
+static struct rte_power_info lcore_power_info[RTE_MAX_LCORE];
+
+/**
+ * It is to set specific freq for specific logical core, according to the index
+ * of supported frequencies.
+ */
+static int
+set_freq_internal(struct rte_power_info *pi, uint32_t idx)
+{
+	if (idx >= RTE_MAX_LCORE_FREQS || idx >= pi->nb_freqs) {
+		RTE_LOG(ERR, POWER, "Invalid frequency index %u, which "
+				"should be less than %u\n", idx, pi->nb_freqs);
+		return -1;
+	}
+
+	/* Check if it is the same as current */
+	if (idx == pi->curr_idx)
+		return 0;
+
+	POWER_DEBUG_TRACE("Freqency[%u] %u to be set for lcore %u\n",
+			idx, pi->freqs[idx], pi->lcore_id);
+	if (fseek(pi->f, 0, SEEK_SET) < 0) {
+		RTE_LOG(ERR, POWER, "Fail to set file position indicator to 0 "
+				"for setting frequency for lcore %u\n", pi->lcore_id);
+		return -1;
+	}
+	if (fprintf(pi->f, "%u", pi->freqs[idx]) < 0) {
+		RTE_LOG(ERR, POWER, "Fail to write new frequency for "
+				"lcore %u\n", pi->lcore_id);
+		return -1;
+	}
+	fflush(pi->f);
+	pi->curr_idx = idx;
+
+	return 1;
+}
+
+/**
+ * It is to check the current scaling governor by reading sys file, and then
+ * set it into 'userspace' if it is not by writing the sys file. The original
+ * governor will be saved for rolling back.
+ */
+static int
+power_set_governor_userspace(struct rte_power_info *pi)
+{
+	FILE *f;
+	int ret = -1;
+	char buf[BUFSIZ];
+	char fullpath[PATH_MAX];
+	char *s;
+	int val;
+
+	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+			pi->lcore_id);
+	f = fopen(fullpath, "rw+");
+	FOPEN_OR_ERR_RET(f, ret);
+
+	s = fgets(buf, sizeof(buf), f);
+	FOPS_OR_NULL_GOTO(s, out);
+
+	/* Check if current governor is userspace */
+	if (strncmp(buf, POWER_GOVERNOR_USERSPACE,
+			sizeof(POWER_GOVERNOR_USERSPACE)) == 0) {
+		ret = 0;
+		POWER_DEBUG_TRACE("Power management governor of lcore %u is "
+				"already userspace\n", pi->lcore_id);
+		goto out;
+	}
+	/* Save the original governor */
+	snprintf(pi->governor_ori, sizeof(pi->governor_ori), "%s", buf);
+
+	/* Write 'userspace' to the governor */
+	val = fseek(f, 0, SEEK_SET);
+	FOPS_OR_ERR_GOTO(val, out);
+
+	val = fputs(POWER_GOVERNOR_USERSPACE, f);
+	FOPS_OR_ERR_GOTO(val, out);
+
+	ret = 0;
+	RTE_LOG(INFO, POWER, "Power management governor of lcore %u has been "
+			"set to user space successfully\n", pi->lcore_id);
+	out:
+	fclose(f);
+
+	return ret;
+}
+
+/**
+ * It is to get the available frequencies of the specific lcore by reading the
+ * sys file.
+ */
+static int
+power_get_available_freqs(struct rte_power_info *pi)
+{
+	FILE *f;
+	int ret = -1, i, count;
+	char *p;
+	char buf[BUFSIZ];
+	char fullpath[PATH_MAX];
+	char *freqs[RTE_MAX_LCORE_FREQS];
+	char *s;
+
+	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_AVAIL_FREQ,
+			pi->lcore_id);
+	f = fopen(fullpath, "r");
+	FOPEN_OR_ERR_RET(f, ret);
+
+	s = fgets(buf, sizeof(buf), f);
+	FOPS_OR_NULL_GOTO(s, out);
+
+	/* Strip the line break if there is */
+	p = strchr(buf, '\n');
+	if (p != NULL)
+		*p = 0;
+
+	/* Split string into at most RTE_MAX_LCORE_FREQS frequencies */
+	count = rte_strsplit(buf, sizeof(buf), freqs,
+			RTE_MAX_LCORE_FREQS, ' ');
+	if (count <= 0) {
+		RTE_LOG(ERR, POWER, "No available frequency in "
+				""POWER_SYSFILE_AVAIL_FREQ"\n", pi->lcore_id);
+		goto out;
+	}
+	if (count >= RTE_MAX_LCORE_FREQS) {
+		RTE_LOG(ERR, POWER, "Too many available frequencies : %d\n",
+				count);
+		goto out;
+	}
+
+	/* Store the available frequncies into power context */
+	for (i = 0, pi->nb_freqs = 0; i < count; i++) {
+		POWER_DEBUG_TRACE("Lcore %u frequency[%d]: %s\n", pi->lcore_id,
+				i, freqs[i]);
+		pi->freqs[pi->nb_freqs++] = strtoul(freqs[i], &p,
+				POWER_CONVERT_TO_DECIMAL);
+	}
+
+	ret = 0;
+	POWER_DEBUG_TRACE("%d frequencie(s) of lcore %u are available\n",
+			count, pi->lcore_id);
+	out:
+	fclose(f);
+
+	return ret;
+}
+
+/**
+ * It is to fopen the sys file for the future setting the lcore frequency.
+ */
+static int
+power_init_for_setting_freq(struct rte_power_info *pi)
+{
+	FILE *f;
+	char fullpath[PATH_MAX];
+	char buf[BUFSIZ];
+	uint32_t i, freq;
+	char *s;
+
+	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_SETSPEED,
+			pi->lcore_id);
+	f = fopen(fullpath, "rw+");
+	FOPEN_OR_ERR_RET(f, -1);
+
+	s = fgets(buf, sizeof(buf), f);
+	FOPS_OR_NULL_GOTO(s, out);
+
+	freq = strtoul(buf, NULL, POWER_CONVERT_TO_DECIMAL);
+	for (i = 0; i < pi->nb_freqs; i++) {
+		if (freq == pi->freqs[i]) {
+			pi->curr_idx = i;
+			pi->f = f;
+			return 0;
+		}
+	}
+
+	out:
+	fclose(f);
+
+	return -1;
+}
+
+int
+rte_power_acpi_cpufreq_init(unsigned lcore_id)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+				lcore_id, RTE_MAX_LCORE - 1U);
+		return -1;
+	}
+
+	pi = &lcore_power_info[lcore_id];
+	if (rte_atomic32_cmpset(&(pi->state), POWER_IDLE, POWER_ONGOING)
+			== 0) {
+		RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+				"in use\n", lcore_id);
+		return -1;
+	}
+
+	pi->lcore_id = lcore_id;
+	/* Check and set the governor */
+	if (power_set_governor_userspace(pi) < 0) {
+		RTE_LOG(ERR, POWER, "Cannot set governor of lcore %u to "
+				"userspace\n", lcore_id);
+		goto fail;
+	}
+
+	/* Get the available frequencies */
+	if (power_get_available_freqs(pi) < 0) {
+		RTE_LOG(ERR, POWER, "Cannot get available frequencies of "
+				"lcore %u\n", lcore_id);
+		goto fail;
+	}
+
+	/* Init for setting lcore frequency */
+	if (power_init_for_setting_freq(pi) < 0) {
+		RTE_LOG(ERR, POWER, "Cannot init for setting frequency for "
+				"lcore %u\n", lcore_id);
+		goto fail;
+	}
+
+	/* Set freq to max by default */
+	if (rte_power_acpi_cpufreq_freq_max(lcore_id) < 0) {
+		RTE_LOG(ERR, POWER, "Cannot set frequency of lcore %u "
+				"to max\n", lcore_id);
+		goto fail;
+	}
+
+	RTE_LOG(INFO, POWER, "Initialized successfully for lcore %u "
+			"power manamgement\n", lcore_id);
+	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_USED);
+
+	return 0;
+
+	fail:
+	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+	return -1;
+}
+
+/**
+ * It is to check the governor and then set the original governor back if
+ * needed by writing the the sys file.
+ */
+static int
+power_set_governor_original(struct rte_power_info *pi)
+{
+	FILE *f;
+	int ret = -1;
+	char buf[BUFSIZ];
+	char fullpath[PATH_MAX];
+	char *s;
+	int val;
+
+	snprintf(fullpath, sizeof(fullpath), POWER_SYSFILE_GOVERNOR,
+			pi->lcore_id);
+	f = fopen(fullpath, "rw+");
+	FOPEN_OR_ERR_RET(f, ret);
+
+	s = fgets(buf, sizeof(buf), f);
+	FOPS_OR_NULL_GOTO(s, out);
+
+	/* Check if the governor to be set is the same as current */
+	if (strncmp(buf, pi->governor_ori, sizeof(pi->governor_ori)) == 0) {
+		ret = 0;
+		POWER_DEBUG_TRACE("Power management governor of lcore %u "
+				"has already been set to %s\n",
+				pi->lcore_id, pi->governor_ori);
+		goto out;
+	}
+
+	/* Write back the original governor */
+	val = fseek(f, 0, SEEK_SET);
+	FOPS_OR_ERR_GOTO(val, out);
+
+	val = fputs(pi->governor_ori, f);
+	FOPS_OR_ERR_GOTO(val, out);
+
+	ret = 0;
+	RTE_LOG(INFO, POWER, "Power management governor of lcore %u "
+			"has been set back to %s successfully\n",
+			pi->lcore_id, pi->governor_ori);
+	out:
+	fclose(f);
+
+	return ret;
+}
+
+int
+rte_power_acpi_cpufreq_exit(unsigned lcore_id)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Lcore id %u can not exceeds %u\n",
+				lcore_id, RTE_MAX_LCORE - 1U);
+		return -1;
+	}
+	pi = &lcore_power_info[lcore_id];
+	if (rte_atomic32_cmpset(&(pi->state), POWER_USED, POWER_ONGOING)
+			== 0) {
+		RTE_LOG(INFO, POWER, "Power management of lcore %u is "
+				"not used\n", lcore_id);
+		return -1;
+	}
+
+	/* Close FD of setting freq */
+	fclose(pi->f);
+	pi->f = NULL;
+
+	/* Set the governor back to the original */
+	if (power_set_governor_original(pi) < 0) {
+		RTE_LOG(ERR, POWER, "Cannot set the governor of %u back "
+				"to the original\n", lcore_id);
+		goto fail;
+	}
+
+	RTE_LOG(INFO, POWER, "Power management of lcore %u has exited from "
+			"'userspace' mode and been set back to the "
+			"original\n", lcore_id);
+	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_IDLE);
+
+	return 0;
+
+	fail:
+	rte_atomic32_cmpset(&(pi->state), POWER_ONGOING, POWER_UNKNOWN);
+
+	return -1;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs, uint32_t num)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE || !freqs) {
+		RTE_LOG(ERR, POWER, "Invalid input parameter\n");
+		return 0;
+	}
+
+	pi = &lcore_power_info[lcore_id];
+	if (num < pi->nb_freqs) {
+		RTE_LOG(ERR, POWER, "Buffer size is not enough\n");
+		return 0;
+	}
+	rte_memcpy(freqs, pi->freqs, pi->nb_freqs * sizeof(uint32_t));
+
+	return pi->nb_freqs;
+}
+
+uint32_t
+rte_power_acpi_cpufreq_get_freq(unsigned lcore_id)
+{
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return RTE_POWER_INVALID_FREQ_INDEX;
+	}
+
+	return lcore_power_info[lcore_id].curr_idx;
+}
+
+int
+rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index)
+{
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return -1;
+	}
+
+	return set_freq_internal(&(lcore_power_info[lcore_id]), index);
+}
+
+int
+rte_power_acpi_cpufreq_freq_down(unsigned lcore_id)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return -1;
+	}
+
+	pi = &lcore_power_info[lcore_id];
+	if (pi->curr_idx + 1 == pi->nb_freqs)
+		return 0;
+
+	/* Frequencies in the array are from high to low. */
+	return set_freq_internal(pi, pi->curr_idx + 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_up(unsigned lcore_id)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return -1;
+	}
+
+	pi = &lcore_power_info[lcore_id];
+	if (pi->curr_idx == 0)
+		return 0;
+
+	/* Frequencies in the array are from high to low. */
+	return set_freq_internal(pi, pi->curr_idx - 1);
+}
+
+int
+rte_power_acpi_cpufreq_freq_max(unsigned lcore_id)
+{
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return -1;
+	}
+
+	/* Frequencies in the array are from high to low. */
+	return set_freq_internal(&lcore_power_info[lcore_id], 0);
+}
+
+int
+rte_power_acpi_cpufreq_freq_min(unsigned lcore_id)
+{
+	struct rte_power_info *pi;
+
+	if (lcore_id >= RTE_MAX_LCORE) {
+		RTE_LOG(ERR, POWER, "Invalid lcore ID\n");
+		return -1;
+	}
+
+	pi = &lcore_power_info[lcore_id];
+
+	/* Frequencies in the array are from high to low. */
+	return set_freq_internal(pi, pi->nb_freqs - 1);
+}
diff --git a/lib/librte_power/rte_power_acpi_cpufreq.h b/lib/librte_power/rte_power_acpi_cpufreq.h
new file mode 100644
index 0000000..68578e9
--- /dev/null
+++ b/lib/librte_power/rte_power_acpi_cpufreq.h
@@ -0,0 +1,192 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_ACPI_CPUFREQ_H
+#define _RTE_POWER_ACPI_CPUFREQ_H
+
+/**
+ * @file
+ * RTE Power Management via userspace ACPI cpufreq
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore. It will check and set the
+ * governor to userspace for the lcore, get the available frequencies, and
+ * prepare to set new lcore frequency.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore. It will set the governor to which
+ * is before initialized.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore. The return value will be
+ * the minimal one of the total number of available frequencies and the number
+ * of buffer. The index of available frequencies used in other interfaces
+ * should be in the range of 0 to this return value.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ * @param freqs
+ *  The buffer array to save the frequencies.
+ * @param num
+ *  The number of frequencies to get.
+ *
+ * @return
+ *  The number of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_freqs(unsigned lcore_id, uint32_t *freqs,
+		uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore. It
+ * will return 'RTE_POWER_INVALID_FREQ_INDEX = (~0)' if error.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  The current index of available frequencies.
+ */
+uint32_t rte_power_acpi_cpufreq_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ * @param index
+ *  The index of available frequencies.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency changed.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency changed.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency changed.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency changed.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success with frequency changed.
+ *  - 0 on success without frequency chnaged.
+ *  - Negative on error.
+ */
+int rte_power_acpi_cpufreq_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
diff --git a/lib/librte_power/rte_power_common.h b/lib/librte_power/rte_power_common.h
new file mode 100644
index 0000000..64bd168
--- /dev/null
+++ b/lib/librte_power/rte_power_common.h
@@ -0,0 +1,39 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef RTE_POWER_COMMON_H_
+#define RTE_POWER_COMMON_H_
+
+#define RTE_POWER_INVALID_FREQ_INDEX (~0)
+
+#endif /* RTE_POWER_COMMON_H_ */
diff --git a/lib/librte_power/rte_power_kvm_vm.c b/lib/librte_power/rte_power_kvm_vm.c
new file mode 100644
index 0000000..3ccd92b
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.c
@@ -0,0 +1,135 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+#include <errno.h>
+#include <string.h>
+
+#include <rte_log.h>
+#include <rte_config.h>
+
+#include "guest_channel.h"
+#include "channel_commands.h"
+#include "rte_power_kvm_vm.h"
+#include "rte_power_common.h"
+
+#define FD_PATH "/dev/virtio-ports/virtio.serial.port.poweragent"
+
+static struct channel_packet pkt[CHANNEL_CMDS_MAX_VM_CHANNELS];
+
+
+int
+rte_power_kvm_vm_init(unsigned lcore_id)
+{
+	if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+		RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+				lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+		return -1;
+	}
+	pkt[lcore_id].command = CPU_POWER;
+	pkt[lcore_id].resource_id = lcore_id;
+	return guest_channel_host_connect(FD_PATH, lcore_id);
+}
+
+int
+rte_power_kvm_vm_exit(unsigned lcore_id)
+{
+	guest_channel_host_disconnect(lcore_id);
+	return 0;
+}
+
+uint32_t
+rte_power_kvm_vm_freqs(__attribute__((unused)) unsigned lcore_id,
+		__attribute__((unused)) uint32_t *freqs,
+		__attribute__((unused)) uint32_t num)
+{
+	RTE_LOG(ERR, POWER, "rte_power_freqs is not implemented "
+			"for Virtual Machine Power Management\n");
+	return -ENOTSUP;
+}
+
+uint32_t
+rte_power_kvm_vm_get_freq(__attribute__((unused)) unsigned lcore_id)
+{
+	RTE_LOG(ERR, POWER, "rte_power_get_freq is not implemented "
+			"for Virtual Machine Power Management\n");
+	return -ENOTSUP;
+}
+
+int
+rte_power_kvm_vm_set_freq(__attribute__((unused)) unsigned lcore_id,
+		__attribute__((unused)) uint32_t index)
+{
+	RTE_LOG(ERR, POWER, "rte_power_set_freq is not implemented "
+			"for Virtual Machine Power Management\n");
+	return -ENOTSUP;
+}
+
+static inline int
+send_msg(unsigned lcore_id, uint32_t scale_direction)
+{
+	int ret;
+	if (lcore_id >= CHANNEL_CMDS_MAX_VM_CHANNELS) {
+		RTE_LOG(ERR, POWER, "Core(%u) is out of range 0...%d\n",
+				lcore_id, CHANNEL_CMDS_MAX_VM_CHANNELS-1);
+		return -1;
+	}
+	pkt[lcore_id].unit = scale_direction;
+	ret = guest_channel_send_msg(&pkt[lcore_id], lcore_id);
+	if (ret == 0)
+		return 1;
+	RTE_LOG(DEBUG, POWER, "Error sending message: %s\n", strerror(ret));
+	return -1;
+}
+
+int
+rte_power_kvm_vm_freq_up(unsigned lcore_id)
+{
+	return send_msg(lcore_id, CPU_POWER_SCALE_UP);
+}
+
+int
+rte_power_kvm_vm_freq_down(unsigned lcore_id)
+{
+	return send_msg(lcore_id, CPU_POWER_SCALE_DOWN);
+}
+
+int
+rte_power_kvm_vm_freq_max(unsigned lcore_id)
+{
+	return send_msg(lcore_id, CPU_POWER_SCALE_MAX);
+}
+
+int
+rte_power_kvm_vm_freq_min(unsigned lcore_id)
+{
+	return send_msg(lcore_id, CPU_POWER_SCALE_MIN);
+}
diff --git a/lib/librte_power/rte_power_kvm_vm.h b/lib/librte_power/rte_power_kvm_vm.h
new file mode 100644
index 0000000..dcbc878
--- /dev/null
+++ b/lib/librte_power/rte_power_kvm_vm.h
@@ -0,0 +1,179 @@
+/*-
+ *   BSD LICENSE
+ *
+ *   Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ *   All rights reserved.
+ *
+ *   Redistribution and use in source and binary forms, with or without
+ *   modification, are permitted provided that the following conditions
+ *   are met:
+ *
+ *     * Redistributions of source code must retain the above copyright
+ *       notice, this list of conditions and the following disclaimer.
+ *     * Redistributions in binary form must reproduce the above copyright
+ *       notice, this list of conditions and the following disclaimer in
+ *       the documentation and/or other materials provided with the
+ *       distribution.
+ *     * Neither the name of Intel Corporation nor the names of its
+ *       contributors may be used to endorse or promote products derived
+ *       from this software without specific prior written permission.
+ *
+ *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _RTE_POWER_KVM_VM_H
+#define _RTE_POWER_KVM_VM_H
+
+/**
+ * @file
+ * RTE Power Management KVM VM
+ */
+
+#include <rte_common.h>
+#include <rte_byteorder.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Initialize power management for a specific lcore.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_init(unsigned lcore_id);
+
+/**
+ * Exit power management on a specific lcore.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 0 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_exit(unsigned lcore_id);
+
+/**
+ * Get the available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ *  lcore id.
+ * @param freqs
+ *  The buffer array to save the frequencies.
+ * @param num
+ *  The number of frequencies to get.
+ *
+ * @return
+ *  -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_freqs(unsigned lcore_id, uint32_t *freqs,
+		uint32_t num);
+
+/**
+ * Return the current index of available frequencies of a specific lcore.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  -ENOTSUP
+ */
+uint32_t rte_power_kvm_vm_get_freq(unsigned lcore_id);
+
+/**
+ * Set the new frequency for a specific lcore by indicating the index of
+ * available frequencies.
+ * It is not currently supported for VM Power Management.
+ *
+ * @param lcore_id
+ *  lcore id.
+ * @param index
+ *  The index of available frequencies.
+ *
+ * @return
+ *  -ENOTSUP
+ */
+int rte_power_kvm_vm_set_freq(unsigned lcore_id, uint32_t index);
+
+/**
+ * Scale up the frequency of a specific lcore. This request is forwarded to the
+ * host monitor.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_freq_up(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore according to the available
+ * frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_freq_down(unsigned lcore_id);
+
+/**
+ * Scale up the frequency of a specific lcore to the highest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_freq_max(unsigned lcore_id);
+
+/**
+ * Scale down the frequency of a specific lcore to the lowest according to the
+ * available frequencies.
+ * It should be protected outside of this function for threadsafe.
+ *
+ * @param lcore_id
+ *  lcore id.
+ *
+ * @return
+ *  - 1 on success.
+ *  - Negative on error.
+ */
+int rte_power_kvm_vm_freq_min(unsigned lcore_id);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
-- 
1.9.3

  parent reply	other threads:[~2014-10-12 19:28 UTC|newest]

Thread overview: 97+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-22 18:34 [dpdk-dev] [PATCH 00/10] VM Power Management Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 04/10] " Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 05/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 06/10] Alternate implementation of librte_power " Alan Carew
2014-09-22 19:17   ` Neil Horman
2014-09-23  7:48     ` Carew, Alan
2014-09-22 18:34 ` [dpdk-dev] [PATCH 07/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 08/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 09/10] VM Power Management Unit Tests(Guest) Alan Carew
2014-09-22 18:34 ` [dpdk-dev] [PATCH 10/10] VM Power Management CLI(Guest) Alan Carew
2014-09-24 17:26 ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 04/10] VM Power Management application and Makefile Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 05/10] VM Power Management CLI(Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 07/10] librte_power common interface for Guest and Host Alan Carew
2014-09-25 10:10     ` Neil Horman
2014-09-25 17:06       ` Carew, Alan
2014-09-25 17:49         ` Neil Horman
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-24 17:26   ` [dpdk-dev] [PATCH v2 10/10] VM Power Management Unit Tests Alan Carew
2014-09-25  2:56   ` [dpdk-dev] [PATCH v2 00/10] VM Power Management Liu, Yong
2014-09-29 15:18   ` [dpdk-dev] [PATCH v3 " Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 02/10] VM Power Management CLI(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 04/10] VM Power Management application and Makefile Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 05/10] VM Power Management CLI(Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 07/10] librte_power common interface for Guest and Host Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-09-29 15:18     ` [dpdk-dev] [PATCH v3 10/10] VM Power Management Unit Tests Alan Carew
2014-09-29 17:29     ` [dpdk-dev] [PATCH v3 00/10] VM Power Management Neil Horman
2014-10-12 19:36     ` [dpdk-dev] [PATCH v4 " Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 01/10] Channel Manager and Monitor for VM Power Management(Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 02/10] VM Power Management CLI(Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 03/10] CPU Frequency Power Management(Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 04/10] VM Power Management application and Makefile Alan Carew
2014-10-16 18:28         ` De Lara Guarch, Pablo
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 05/10] VM Power Management CLI(Guest) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 06/10] VM communication channels for VM Power Management(Guest) Alan Carew
2014-10-12 19:36       ` Alan Carew [this message]
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 08/10] Packet format for VM Power Management(Host and Guest) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 09/10] Build system integration for VM Power Management(Guest and Host) Alan Carew
2014-10-12 19:36       ` [dpdk-dev] [PATCH v4 10/10] VM Power Management Unit Tests Alan Carew
2014-10-13  6:17       ` [dpdk-dev] [PATCH v4 00/10] VM Power Management Liu, Yong
2014-10-13 20:26       ` Thomas Monjalon
2014-10-14 12:37         ` Carew, Alan
2014-10-14 15:03           ` Thomas Monjalon
2014-10-16 15:21             ` Carew, Alan
2014-10-28 15:21               ` Thomas Monjalon
2014-11-10  9:05                 ` Carew, Alan
2014-11-10 17:54                   ` O'driscoll, Tim
2014-11-21 23:51                     ` Zhu, Heqing
2014-11-22 17:17                     ` Vincent JARDIN
2014-12-09 17:35                       ` Paolo Bonzini
2014-12-11 23:18                         ` Thomas Monjalon
2014-12-12 13:00                           ` Carew, Alan
2014-12-12 14:50                             ` Paolo Bonzini
2014-12-12 16:10                               ` Thomas Monjalon
2014-12-12 16:13                                 ` Paolo Bonzini
2014-11-21 17:42       ` [dpdk-dev] [PATCH v5 00/10] Virtual Machine " Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 01/10] Channel Manager and Monitor for VM Power Management(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 02/10] VM Power Management CLI(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 03/10] CPU Frequency Power Management(Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 04/10] VM Power Management application and Makefile Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 05/10] VM Power Management CLI(Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 06/10] VM communication channels for VM Power Management(Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 07/10] librte_power common interface for Guest and Host Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 08/10] Packet format for VM Power Management(Host and Guest) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 09/10] Build system integration for VM Power Management(Guest and Host) Pablo de Lara
2014-11-21 17:42         ` [dpdk-dev] [PATCH v5 10/10] VM Power Management Unit Tests Pablo de Lara
2014-11-25 16:18         ` [dpdk-dev] [PATCH v6 00/10] Virtual Machine Power Management Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 01/10] Channel Manager and Monitor for VM Power Management(Host) Pablo de Lara
2014-11-29 15:21             ` Neil Horman
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 02/10] VM Power Management CLI(Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 03/10] CPU Frequency Power Management(Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 04/10] VM Power Management application and Makefile Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 05/10] VM Power Management CLI(Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 06/10] VM communication channels for VM Power Management(Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 07/10] librte_power common interface for Guest and Host Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 08/10] Packet format for VM Power Management(Host and Guest) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 09/10] Build system integration for VM Power Management(Guest and Host) Pablo de Lara
2014-11-25 16:18           ` [dpdk-dev] [PATCH v6 10/10] VM Power Management Unit Tests Pablo de Lara
2014-11-26 16:41           ` [dpdk-dev] [PATCH v6 00/10] Virtual Machine Power Management Thomas Monjalon
2014-11-10  9:19     ` [dpdk-dev] [PATCH v2] librte_cmdline: FreeBSD Fix oveflow when size of command result structure is greater than BUFSIZ Alan Carew
2014-12-05 14:16       ` Olivier MATZ
2014-12-05 14:19         ` [dpdk-dev] [PATCH v3] " Olivier Matz
2014-12-05 15:51           ` Bruce Richardson
2014-12-05 15:58             ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413142571-23069-8-git-send-email-alan.carew@intel.com \
    --to=alan.carew@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git