From: Yong Wang <yongwang@vmware.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH 5/5] vmxnet3: Some perf improvement on the rx path
Date: Sun, 12 Oct 2014 23:23:09 -0700 [thread overview]
Message-ID: <1413181389-14887-6-git-send-email-yongwang@vmware.com> (raw)
In-Reply-To: <1413181389-14887-1-git-send-email-yongwang@vmware.com>
Signed-off-by: Yong Wang <yongwang@vmware.com>
---
lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c | 242 ++++++++++++++++------------------
1 file changed, 116 insertions(+), 126 deletions(-)
diff --git a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
index e2fb8a8..4799f4d 100644
--- a/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
+++ b/lib/librte_pmd_vmxnet3/vmxnet3_rxtx.c
@@ -451,6 +451,19 @@ vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
uint32_t i = 0, val = 0;
struct vmxnet3_cmd_ring *ring = &rxq->cmd_ring[ring_id];
+ if (ring_id == 0) {
+ /* Usually: One HEAD type buf per packet
+ * val = (ring->next2fill % rxq->hw->bufs_per_pkt) ?
+ * VMXNET3_RXD_BTYPE_BODY : VMXNET3_RXD_BTYPE_HEAD;
+ */
+
+ /* We use single packet buffer so all heads here */
+ val = VMXNET3_RXD_BTYPE_HEAD;
+ } else {
+ /* All BODY type buffers for 2nd ring */
+ val = VMXNET3_RXD_BTYPE_BODY;
+ }
+
while (vmxnet3_cmd_ring_desc_avail(ring) > 0) {
struct Vmxnet3_RxDesc *rxd;
struct rte_mbuf *mbuf;
@@ -458,22 +471,9 @@ vmxnet3_post_rx_bufs(vmxnet3_rx_queue_t *rxq, uint8_t ring_id)
rxd = (struct Vmxnet3_RxDesc *)(ring->base + ring->next2fill);
- if (ring->rid == 0) {
- /* Usually: One HEAD type buf per packet
- * val = (ring->next2fill % rxq->hw->bufs_per_pkt) ?
- * VMXNET3_RXD_BTYPE_BODY : VMXNET3_RXD_BTYPE_HEAD;
- */
-
- /* We use single packet buffer so all heads here */
- val = VMXNET3_RXD_BTYPE_HEAD;
- } else {
- /* All BODY type buffers for 2nd ring; which won't be used at all by ESXi */
- val = VMXNET3_RXD_BTYPE_BODY;
- }
-
/* Allocate blank mbuf for the current Rx Descriptor */
mbuf = rte_rxmbuf_alloc(rxq->mp);
- if (mbuf == NULL) {
+ if (unlikely(mbuf == NULL)) {
PMD_RX_LOG(ERR, "Error allocating mbuf in %s", __func__);
rxq->stats.rx_buf_alloc_failure++;
err = ENOMEM;
@@ -536,151 +536,141 @@ vmxnet3_recv_pkts(void *rx_queue, struct rte_mbuf **rx_pkts, uint16_t nb_pkts)
rcd = &rxq->comp_ring.base[rxq->comp_ring.next2proc].rcd;
- if (rxq->stopped) {
+ if (unlikely(rxq->stopped)) {
PMD_RX_LOG(DEBUG, "Rx queue is stopped.");
return 0;
}
while (rcd->gen == rxq->comp_ring.gen) {
-
if (nb_rx >= nb_pkts)
break;
+
idx = rcd->rxdIdx;
ring_idx = (uint8_t)((rcd->rqID == rxq->qid1) ? 0 : 1);
rxd = (Vmxnet3_RxDesc *)rxq->cmd_ring[ring_idx].base + idx;
rbi = rxq->cmd_ring[ring_idx].buf_info + idx;
- if (rcd->sop != 1 || rcd->eop != 1) {
+ if (unlikely(rcd->sop != 1 || rcd->eop != 1)) {
rte_pktmbuf_free_seg(rbi->m);
-
PMD_RX_LOG(DEBUG, "Packet spread across multiple buffers\n)");
goto rcd_done;
+ }
- } else {
-
- PMD_RX_LOG(DEBUG, "rxd idx: %d ring idx: %d.", idx, ring_idx);
+ PMD_RX_LOG(DEBUG, "rxd idx: %d ring idx: %d.", idx, ring_idx);
#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
- VMXNET3_ASSERT(rcd->len <= rxd->len);
- VMXNET3_ASSERT(rbi->m);
+ VMXNET3_ASSERT(rcd->len <= rxd->len);
+ VMXNET3_ASSERT(rbi->m);
#endif
- if (rcd->len == 0) {
- PMD_RX_LOG(DEBUG, "Rx buf was skipped. rxring[%d][%d]\n)",
- ring_idx, idx);
+ if (unlikely(rcd->len == 0)) {
+ PMD_RX_LOG(DEBUG, "Rx buf was skipped. rxring[%d][%d]\n)",
+ ring_idx, idx);
#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
- VMXNET3_ASSERT(rcd->sop && rcd->eop);
+ VMXNET3_ASSERT(rcd->sop && rcd->eop);
#endif
- rte_pktmbuf_free_seg(rbi->m);
-
- goto rcd_done;
- }
+ rte_pktmbuf_free_seg(rbi->m);
+ goto rcd_done;
+ }
- /* Assuming a packet is coming in a single packet buffer */
- if (rxd->btype != VMXNET3_RXD_BTYPE_HEAD) {
- PMD_RX_LOG(DEBUG,
- "Alert : Misbehaving device, incorrect "
- " buffer type used. iPacket dropped.");
- rte_pktmbuf_free_seg(rbi->m);
- goto rcd_done;
- }
+ /* Assuming a packet is coming in a single packet buffer */
+ if (unlikely(rxd->btype != VMXNET3_RXD_BTYPE_HEAD)) {
+ PMD_RX_LOG(DEBUG,
+ "Alert : Misbehaving device, incorrect "
+ " buffer type used. iPacket dropped.");
+ rte_pktmbuf_free_seg(rbi->m);
+ goto rcd_done;
+ }
#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
- VMXNET3_ASSERT(rxd->btype == VMXNET3_RXD_BTYPE_HEAD);
+ VMXNET3_ASSERT(rxd->btype == VMXNET3_RXD_BTYPE_HEAD);
#endif
- /* Get the packet buffer pointer from buf_info */
- rxm = rbi->m;
-
- /* Clear descriptor associated buf_info to be reused */
- rbi->m = NULL;
- rbi->bufPA = 0;
-
- /* Update the index that we received a packet */
- rxq->cmd_ring[ring_idx].next2comp = idx;
-
- /* For RCD with EOP set, check if there is frame error */
- if (rcd->err) {
- rxq->stats.drop_total++;
- rxq->stats.drop_err++;
-
- if (!rcd->fcs) {
- rxq->stats.drop_fcs++;
- PMD_RX_LOG(ERR, "Recv packet dropped due to frame err.");
- }
- PMD_RX_LOG(ERR, "Error in received packet rcd#:%d rxd:%d",
- (int)(rcd - (struct Vmxnet3_RxCompDesc *)
- rxq->comp_ring.base), rcd->rxdIdx);
- rte_pktmbuf_free_seg(rxm);
-
- goto rcd_done;
- }
+ /* Get the packet buffer pointer from buf_info */
+ rxm = rbi->m;
- /* Check for hardware stripped VLAN tag */
- if (rcd->ts) {
- PMD_RX_LOG(DEBUG, "Received packet with vlan ID: %d.",
- rcd->tci);
- rxm->ol_flags = PKT_RX_VLAN_PKT;
-#ifdef RTE_LIBRTE_VMXNET3_DEBUG_DRIVER
- VMXNET3_ASSERT(rxm &&
- rte_pktmbuf_mtod(rxm, void *));
-#endif
- /* Copy vlan tag in packet buffer */
- rxm->vlan_tci = rte_le_to_cpu_16((uint16_t)rcd->tci);
- } else {
- rxm->ol_flags = 0;
- rxm->vlan_tci = 0;
- }
+ /* Clear descriptor associated buf_info to be reused */
+ rbi->m = NULL;
+ rbi->bufPA = 0;
- /* Initialize newly received packet buffer */
- rxm->port = rxq->port_id;
- rxm->nb_segs = 1;
- rxm->next = NULL;
- rxm->pkt_len = (uint16_t)rcd->len;
- rxm->data_len = (uint16_t)rcd->len;
- rxm->port = rxq->port_id;
- rxm->data_off = RTE_PKTMBUF_HEADROOM;
-
- /* Check packet types, rx checksum errors, etc. Only support IPv4 so far. */
- if (rcd->v4) {
- struct ether_hdr *eth = rte_pktmbuf_mtod(rxm, struct ether_hdr *);
- struct ipv4_hdr *ip = (struct ipv4_hdr *)(eth + 1);
-
- if (((ip->version_ihl & 0xf) << 2) > (int)sizeof(struct ipv4_hdr))
- rxm->ol_flags |= PKT_RX_IPV4_HDR_EXT;
- else
- rxm->ol_flags |= PKT_RX_IPV4_HDR;
-
- if (!rcd->cnc) {
- if (!rcd->ipc)
- rxm->ol_flags |= PKT_RX_IP_CKSUM_BAD;
-
- if ((rcd->tcp || rcd->udp) && !rcd->tuc)
- rxm->ol_flags |= PKT_RX_L4_CKSUM_BAD;
- }
- }
+ /* Update the index that we received a packet */
+ rxq->cmd_ring[ring_idx].next2comp = idx;
- rx_pkts[nb_rx++] = rxm;
-rcd_done:
- rxq->cmd_ring[ring_idx].next2comp = idx;
- VMXNET3_INC_RING_IDX_ONLY(rxq->cmd_ring[ring_idx].next2comp, rxq->cmd_ring[ring_idx].size);
+ /* For RCD with EOP set, check if there is frame error */
+ if (unlikely(rcd->err)) {
+ rxq->stats.drop_total++;
+ rxq->stats.drop_err++;
- /* It's time to allocate some new buf and renew descriptors */
- vmxnet3_post_rx_bufs(rxq, ring_idx);
- if (unlikely(rxq->shared->ctrl.updateRxProd)) {
- VMXNET3_WRITE_BAR0_REG(hw, rxprod_reg[ring_idx] + (rxq->queue_id * VMXNET3_REG_ALIGN),
- rxq->cmd_ring[ring_idx].next2fill);
+ if (!rcd->fcs) {
+ rxq->stats.drop_fcs++;
+ PMD_RX_LOG(ERR, "Recv packet dropped due to frame err.");
}
+ PMD_RX_LOG(ERR, "Error in received packet rcd#:%d rxd:%d",
+ (int)(rcd - (struct Vmxnet3_RxCompDesc *)
+ rxq->comp_ring.base), rcd->rxdIdx);
+ rte_pktmbuf_free_seg(rxm);
+ goto rcd_done;
+ }
- /* Advance to the next descriptor in comp_ring */
- vmxnet3_comp_ring_adv_next2proc(&rxq->comp_ring);
+ /* Check for hardware stripped VLAN tag */
+ if (rcd->ts) {
+ PMD_RX_LOG(DEBUG, "Received packet with vlan ID: %d.",
+ rcd->tci);
+ rxm->ol_flags = PKT_RX_VLAN_PKT;
+ /* Copy vlan tag in packet buffer */
+ rxm->vlan_tci = rte_le_to_cpu_16((uint16_t)rcd->tci);
+ } else {
+ rxm->ol_flags = 0;
+ rxm->vlan_tci = 0;
+ }
- rcd = &rxq->comp_ring.base[rxq->comp_ring.next2proc].rcd;
- nb_rxd++;
- if (nb_rxd > rxq->cmd_ring[0].size) {
- PMD_RX_LOG(ERR,
- "Used up quota of receiving packets,"
- " relinquish control.");
- break;
+ /* Initialize newly received packet buffer */
+ rxm->port = rxq->port_id;
+ rxm->nb_segs = 1;
+ rxm->next = NULL;
+ rxm->pkt_len = (uint16_t)rcd->len;
+ rxm->data_len = (uint16_t)rcd->len;
+ rxm->data_off = RTE_PKTMBUF_HEADROOM;
+
+ /* Check packet type, checksum errors, etc. Only support IPv4 for now. */
+ if (rcd->v4) {
+ struct ether_hdr *eth = rte_pktmbuf_mtod(rxm, struct ether_hdr *);
+ struct ipv4_hdr *ip = (struct ipv4_hdr *)(eth + 1);
+
+ if (((ip->version_ihl & 0xf) << 2) > (int)sizeof(struct ipv4_hdr))
+ rxm->ol_flags |= PKT_RX_IPV4_HDR_EXT;
+ else
+ rxm->ol_flags |= PKT_RX_IPV4_HDR;
+
+ if (!rcd->cnc) {
+ if (!rcd->ipc)
+ rxm->ol_flags |= PKT_RX_IP_CKSUM_BAD;
+
+ if ((rcd->tcp || rcd->udp) && !rcd->tuc)
+ rxm->ol_flags |= PKT_RX_L4_CKSUM_BAD;
}
}
+
+ rx_pkts[nb_rx++] = rxm;
+rcd_done:
+ rxq->cmd_ring[ring_idx].next2comp = idx;
+ VMXNET3_INC_RING_IDX_ONLY(rxq->cmd_ring[ring_idx].next2comp, rxq->cmd_ring[ring_idx].size);
+
+ /* It's time to allocate some new buf and renew descriptors */
+ vmxnet3_post_rx_bufs(rxq, ring_idx);
+ if (unlikely(rxq->shared->ctrl.updateRxProd)) {
+ VMXNET3_WRITE_BAR0_REG(hw, rxprod_reg[ring_idx] + (rxq->queue_id * VMXNET3_REG_ALIGN),
+ rxq->cmd_ring[ring_idx].next2fill);
+ }
+
+ /* Advance to the next descriptor in comp_ring */
+ vmxnet3_comp_ring_adv_next2proc(&rxq->comp_ring);
+
+ rcd = &rxq->comp_ring.base[rxq->comp_ring.next2proc].rcd;
+ nb_rxd++;
+ if (nb_rxd > rxq->cmd_ring[0].size) {
+ PMD_RX_LOG(ERR,
+ "Used up quota of receiving packets,"
+ " relinquish control.");
+ break;
+ }
}
return nb_rx;
--
1.9.1
next prev parent reply other threads:[~2014-10-13 6:15 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-10-13 6:23 [dpdk-dev] [PATCH 0/5] vmxnet3 pmd fixes/improvement Yong Wang
2014-10-13 6:23 ` [dpdk-dev] [PATCH 1/5] vmxnet3: Fix VLAN Rx stripping Yong Wang
2014-10-13 9:31 ` Stephen Hemminger
2014-10-13 18:42 ` Yong Wang
2014-10-22 13:39 ` Stephen Hemminger
2014-10-28 21:57 ` Yong Wang
2014-10-29 9:04 ` Bruce Richardson
2014-10-29 9:41 ` Thomas Monjalon
2014-10-29 17:57 ` Yong Wang
2014-10-29 18:51 ` Thomas Monjalon
2014-10-13 6:23 ` [dpdk-dev] [PATCH 2/5] vmxnet3: Add VLAN Tx offload Yong Wang
2014-10-13 6:23 ` [dpdk-dev] [PATCH 3/5] vmxnet3: Fix dev stop/restart bug Yong Wang
2014-10-13 6:23 ` [dpdk-dev] [PATCH 4/5] vmxnet3: Add rx pkt check offloads Yong Wang
2014-10-13 6:23 ` Yong Wang [this message]
2014-11-05 0:13 ` [dpdk-dev] [PATCH 5/5] vmxnet3: Some perf improvement on the rx path Thomas Monjalon
2014-10-13 20:29 ` [dpdk-dev] [PATCH 0/5] vmxnet3 pmd fixes/improvement Thomas Monjalon
2014-10-13 21:00 ` Yong Wang
2014-10-21 22:10 ` Yong Wang
2014-10-22 7:07 ` Cao, Waterman
2014-10-28 14:40 ` Thomas Monjalon
2014-10-28 19:59 ` Yong Wang
2014-10-29 0:33 ` Cao, Waterman
2014-11-05 1:32 ` Cao, Waterman
2014-11-04 5:57 ` Zhang, XiaonanX
2014-11-04 22:50 ` Thomas Monjalon
2014-11-05 5:26 ` Cao, Waterman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1413181389-14887-6-git-send-email-yongwang@vmware.com \
--to=yongwang@vmware.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).