* [dpdk-dev] [PATCH 00/14] new vhost example
@ 2014-10-20 4:38 Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 01/14] copy old " Huawei Xie
` (15 more replies)
0 siblings, 16 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
New vhost example is a transform of old vhost example.
It calls vhost library API to receive/transmit packets from guest VM.
zero copy logic is kept in vhost example.
Huawei Xie (14):
copy old vhost example files main.c/main.h as the base of new vhost example
remove virtio_dev_(merge_)rx, copy_from_mbuf_to_ring, virtio_dev_(merge_)tx
add hpa region check and generation functions
dev->vdev
hpa region generation in new_device
call rte_vhost_enqueue_burst, rte_vhost_dequeue_burst API. Add mac learning and retry logic
patch virtio_tx_route
remove gpa_to_vva, base_index
other APIs
vmdq_rx_q change
minimal changes
add branch hint
disalbe RTE_IXGBE_INC_VEC as workaround for merge-able feature
add example Makefile
examples/vhost/Makefile | 60 +
examples/vhost/main.c | 3051 +++++++++++++++++++++++++++++++++++++++++++++++
examples/vhost/main.h | 122 ++
3 files changed, 3233 insertions(+)
create mode 100644 examples/vhost/Makefile
create mode 100644 examples/vhost/main.c
create mode 100644 examples/vhost/main.h
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 01/14] copy old vhost example
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 02/14] remove virtio_dev_rx, virtio_dev_merge_rx, copy_from_mbuf_to_ring, virtio_dev_tx, virtio_dev_merge_tx Huawei Xie
` (14 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
This patch copies two files main.c/main.h from most recent vhost example as
the base for new vhost example.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 3727 +++++++++++++++++++++++++++++++++++++++++++++++++
examples/vhost/main.h | 86 ++
2 files changed, 3813 insertions(+)
create mode 100644 examples/vhost/main.c
create mode 100644 examples/vhost/main.h
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
new file mode 100644
index 0000000..c23d453
--- /dev/null
+++ b/examples/vhost/main.c
@@ -0,0 +1,3727 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <arpa/inet.h>
+#include <getopt.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
+#include <signal.h>
+#include <stdint.h>
+#include <sys/eventfd.h>
+#include <sys/param.h>
+#include <unistd.h>
+
+#include <rte_atomic.h>
+#include <rte_cycles.h>
+#include <rte_ethdev.h>
+#include <rte_log.h>
+#include <rte_string_fns.h>
+#include <rte_malloc.h>
+
+#include "main.h"
+#include "virtio-net.h"
+#include "vhost-net-cdev.h"
+
+#define MAX_QUEUES 128
+
+/* the maximum number of external ports supported */
+#define MAX_SUP_PORTS 1
+
+/*
+ * Calculate the number of buffers needed per port
+ */
+#define NUM_MBUFS_PER_PORT ((MAX_QUEUES*RTE_TEST_RX_DESC_DEFAULT) + \
+ (num_switching_cores*MAX_PKT_BURST) + \
+ (num_switching_cores*RTE_TEST_TX_DESC_DEFAULT) +\
+ (num_switching_cores*MBUF_CACHE_SIZE))
+
+#define MBUF_CACHE_SIZE 128
+#define MBUF_SIZE (2048 + sizeof(struct rte_mbuf) + RTE_PKTMBUF_HEADROOM)
+
+/*
+ * No frame data buffer allocated from host are required for zero copy
+ * implementation, guest will allocate the frame data buffer, and vhost
+ * directly use it.
+ */
+#define VIRTIO_DESCRIPTOR_LEN_ZCP 1518
+#define MBUF_SIZE_ZCP (VIRTIO_DESCRIPTOR_LEN_ZCP + sizeof(struct rte_mbuf) \
+ + RTE_PKTMBUF_HEADROOM)
+#define MBUF_CACHE_SIZE_ZCP 0
+
+/*
+ * RX and TX Prefetch, Host, and Write-back threshold values should be
+ * carefully set for optimal performance. Consult the network
+ * controller's datasheet and supporting DPDK documentation for guidance
+ * on how these parameters should be set.
+ */
+#define RX_PTHRESH 8 /* Default values of RX prefetch threshold reg. */
+#define RX_HTHRESH 8 /* Default values of RX host threshold reg. */
+#define RX_WTHRESH 4 /* Default values of RX write-back threshold reg. */
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+#define TX_PTHRESH 36 /* Default values of TX prefetch threshold reg. */
+#define TX_HTHRESH 0 /* Default values of TX host threshold reg. */
+#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
+
+#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
+#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
+#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
+
+#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
+#define BURST_RX_RETRIES 4 /* Number of retries on RX. */
+
+#define JUMBO_FRAME_MAX_SIZE 0x2600
+
+/* State of virtio device. */
+#define DEVICE_MAC_LEARNING 0
+#define DEVICE_RX 1
+#define DEVICE_SAFE_REMOVE 2
+
+/* Config_core_flag status definitions. */
+#define REQUEST_DEV_REMOVAL 1
+#define ACK_DEV_REMOVAL 0
+
+/* Configurable number of RX/TX ring descriptors */
+#define RTE_TEST_RX_DESC_DEFAULT 1024
+#define RTE_TEST_TX_DESC_DEFAULT 512
+
+/*
+ * Need refine these 2 macros for legacy and DPDK based front end:
+ * Max vring avail descriptor/entries from guest - MAX_PKT_BURST
+ * And then adjust power 2.
+ */
+/*
+ * For legacy front end, 128 descriptors,
+ * half for virtio header, another half for mbuf.
+ */
+#define RTE_TEST_RX_DESC_DEFAULT_ZCP 32 /* legacy: 32, DPDK virt FE: 128. */
+#define RTE_TEST_TX_DESC_DEFAULT_ZCP 64 /* legacy: 64, DPDK virt FE: 64. */
+
+/* Get first 4 bytes in mbuf headroom. */
+#define MBUF_HEADROOM_UINT32(mbuf) (*(uint32_t *)((uint8_t *)(mbuf) \
+ + sizeof(struct rte_mbuf)))
+
+/* true if x is a power of 2 */
+#define POWEROF2(x) ((((x)-1) & (x)) == 0)
+
+#define INVALID_PORT_ID 0xFF
+
+/* Max number of devices. Limited by vmdq. */
+#define MAX_DEVICES 64
+
+/* Size of buffers used for snprintfs. */
+#define MAX_PRINT_BUFF 6072
+
+/* Maximum character device basename size. */
+#define MAX_BASENAME_SZ 10
+
+/* Maximum long option length for option parsing. */
+#define MAX_LONG_OPT_SZ 64
+
+/* Used to compare MAC addresses. */
+#define MAC_ADDR_CMP 0xFFFFFFFFFFFFULL
+
+/* Number of descriptors per cacheline. */
+#define DESC_PER_CACHELINE (CACHE_LINE_SIZE / sizeof(struct vring_desc))
+
+/* mask of enabled ports */
+static uint32_t enabled_port_mask = 0;
+
+/*Number of switching cores enabled*/
+static uint32_t num_switching_cores = 0;
+
+/* number of devices/queues to support*/
+static uint32_t num_queues = 0;
+uint32_t num_devices = 0;
+
+/*
+ * Enable zero copy, pkts buffer will directly dma to hw descriptor,
+ * disabled on default.
+ */
+static uint32_t zero_copy;
+
+/* number of descriptors to apply*/
+static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
+static uint32_t num_tx_descriptor = RTE_TEST_TX_DESC_DEFAULT_ZCP;
+
+/* max ring descriptor, ixgbe, i40e, e1000 all are 4096. */
+#define MAX_RING_DESC 4096
+
+struct vpool {
+ struct rte_mempool *pool;
+ struct rte_ring *ring;
+ uint32_t buf_size;
+} vpool_array[MAX_QUEUES+MAX_QUEUES];
+
+/* Enable VM2VM communications. If this is disabled then the MAC address compare is skipped. */
+typedef enum {
+ VM2VM_DISABLED = 0,
+ VM2VM_SOFTWARE = 1,
+ VM2VM_HARDWARE = 2,
+ VM2VM_LAST
+} vm2vm_type;
+static vm2vm_type vm2vm_mode = VM2VM_SOFTWARE;
+
+/* The type of host physical address translated from guest physical address. */
+typedef enum {
+ PHYS_ADDR_CONTINUOUS = 0,
+ PHYS_ADDR_CROSS_SUBREG = 1,
+ PHYS_ADDR_INVALID = 2,
+ PHYS_ADDR_LAST
+} hpa_type;
+
+/* Enable stats. */
+static uint32_t enable_stats = 0;
+/* Enable retries on RX. */
+static uint32_t enable_retry = 1;
+/* Specify timeout (in useconds) between retries on RX. */
+static uint32_t burst_rx_delay_time = BURST_RX_WAIT_US;
+/* Specify the number of retries on RX. */
+static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
+
+/* Character device basename. Can be set by user. */
+static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
+
+/* Charater device index. Can be set by user. */
+static uint32_t dev_index = 0;
+
+/* This can be set by the user so it is made available here. */
+extern uint64_t VHOST_FEATURES;
+
+/* Default configuration for rx and tx thresholds etc. */
+static struct rte_eth_rxconf rx_conf_default = {
+ .rx_thresh = {
+ .pthresh = RX_PTHRESH,
+ .hthresh = RX_HTHRESH,
+ .wthresh = RX_WTHRESH,
+ },
+ .rx_drop_en = 1,
+};
+
+/*
+ * These default values are optimized for use with the Intel(R) 82599 10 GbE
+ * Controller and the DPDK ixgbe/igb PMD. Consider using other values for other
+ * network controllers and/or network drivers.
+ */
+static struct rte_eth_txconf tx_conf_default = {
+ .tx_thresh = {
+ .pthresh = TX_PTHRESH,
+ .hthresh = TX_HTHRESH,
+ .wthresh = TX_WTHRESH,
+ },
+ .tx_free_thresh = 0, /* Use PMD default values */
+ .tx_rs_thresh = 0, /* Use PMD default values */
+};
+
+/* empty vmdq configuration structure. Filled in programatically */
+static struct rte_eth_conf vmdq_conf_default = {
+ .rxmode = {
+ .mq_mode = ETH_MQ_RX_VMDQ_ONLY,
+ .split_hdr_size = 0,
+ .header_split = 0, /**< Header Split disabled */
+ .hw_ip_checksum = 0, /**< IP checksum offload disabled */
+ .hw_vlan_filter = 0, /**< VLAN filtering disabled */
+ /*
+ * It is necessary for 1G NIC such as I350,
+ * this fixes bug of ipv4 forwarding in guest can't
+ * forward pakets from one virtio dev to another virtio dev.
+ */
+ .hw_vlan_strip = 1, /**< VLAN strip enabled. */
+ .jumbo_frame = 0, /**< Jumbo Frame Support disabled */
+ .hw_strip_crc = 0, /**< CRC stripped by hardware */
+ },
+
+ .txmode = {
+ .mq_mode = ETH_MQ_TX_NONE,
+ },
+ .rx_adv_conf = {
+ /*
+ * should be overridden separately in code with
+ * appropriate values
+ */
+ .vmdq_rx_conf = {
+ .nb_queue_pools = ETH_8_POOLS,
+ .enable_default_pool = 0,
+ .default_pool = 0,
+ .nb_pool_maps = 0,
+ .pool_map = {{0, 0},},
+ },
+ },
+};
+
+static unsigned lcore_ids[RTE_MAX_LCORE];
+static uint8_t ports[RTE_MAX_ETHPORTS];
+static unsigned num_ports = 0; /**< The number of ports specified in command line */
+
+static const uint16_t external_pkt_default_vlan_tag = 2000;
+const uint16_t vlan_tags[] = {
+ 1000, 1001, 1002, 1003, 1004, 1005, 1006, 1007,
+ 1008, 1009, 1010, 1011, 1012, 1013, 1014, 1015,
+ 1016, 1017, 1018, 1019, 1020, 1021, 1022, 1023,
+ 1024, 1025, 1026, 1027, 1028, 1029, 1030, 1031,
+ 1032, 1033, 1034, 1035, 1036, 1037, 1038, 1039,
+ 1040, 1041, 1042, 1043, 1044, 1045, 1046, 1047,
+ 1048, 1049, 1050, 1051, 1052, 1053, 1054, 1055,
+ 1056, 1057, 1058, 1059, 1060, 1061, 1062, 1063,
+};
+
+/* ethernet addresses of ports */
+static struct ether_addr vmdq_ports_eth_addr[RTE_MAX_ETHPORTS];
+
+/* heads for the main used and free linked lists for the data path. */
+static struct virtio_net_data_ll *ll_root_used = NULL;
+static struct virtio_net_data_ll *ll_root_free = NULL;
+
+/* Array of data core structures containing information on individual core linked lists. */
+static struct lcore_info lcore_info[RTE_MAX_LCORE];
+
+/* Used for queueing bursts of TX packets. */
+struct mbuf_table {
+ unsigned len;
+ unsigned txq_id;
+ struct rte_mbuf *m_table[MAX_PKT_BURST];
+};
+
+/* TX queue for each data core. */
+struct mbuf_table lcore_tx_queue[RTE_MAX_LCORE];
+
+/* TX queue fori each virtio device for zero copy. */
+struct mbuf_table tx_queue_zcp[MAX_QUEUES];
+
+/* Vlan header struct used to insert vlan tags on TX. */
+struct vlan_ethhdr {
+ unsigned char h_dest[ETH_ALEN];
+ unsigned char h_source[ETH_ALEN];
+ __be16 h_vlan_proto;
+ __be16 h_vlan_TCI;
+ __be16 h_vlan_encapsulated_proto;
+};
+
+/* IPv4 Header */
+struct ipv4_hdr {
+ uint8_t version_ihl; /**< version and header length */
+ uint8_t type_of_service; /**< type of service */
+ uint16_t total_length; /**< length of packet */
+ uint16_t packet_id; /**< packet ID */
+ uint16_t fragment_offset; /**< fragmentation offset */
+ uint8_t time_to_live; /**< time to live */
+ uint8_t next_proto_id; /**< protocol ID */
+ uint16_t hdr_checksum; /**< header checksum */
+ uint32_t src_addr; /**< source address */
+ uint32_t dst_addr; /**< destination address */
+} __attribute__((__packed__));
+
+/* Header lengths. */
+#define VLAN_HLEN 4
+#define VLAN_ETH_HLEN 18
+
+/* Per-device statistics struct */
+struct device_statistics {
+ uint64_t tx_total;
+ rte_atomic64_t rx_total_atomic;
+ uint64_t rx_total;
+ uint64_t tx;
+ rte_atomic64_t rx_atomic;
+ uint64_t rx;
+} __rte_cache_aligned;
+struct device_statistics dev_statistics[MAX_DEVICES];
+
+/*
+ * Builds up the correct configuration for VMDQ VLAN pool map
+ * according to the pool & queue limits.
+ */
+static inline int
+get_eth_conf(struct rte_eth_conf *eth_conf, uint32_t num_devices)
+{
+ struct rte_eth_vmdq_rx_conf conf;
+ unsigned i;
+
+ memset(&conf, 0, sizeof(conf));
+ conf.nb_queue_pools = (enum rte_eth_nb_pools)num_devices;
+ conf.nb_pool_maps = num_devices;
+ conf.enable_loop_back =
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back;
+
+ for (i = 0; i < conf.nb_pool_maps; i++) {
+ conf.pool_map[i].vlan_id = vlan_tags[ i ];
+ conf.pool_map[i].pools = (1UL << i);
+ }
+
+ (void)(rte_memcpy(eth_conf, &vmdq_conf_default, sizeof(*eth_conf)));
+ (void)(rte_memcpy(ð_conf->rx_adv_conf.vmdq_rx_conf, &conf,
+ sizeof(eth_conf->rx_adv_conf.vmdq_rx_conf)));
+ return 0;
+}
+
+/*
+ * Validate the device number according to the max pool number gotten form
+ * dev_info. If the device number is invalid, give the error message and
+ * return -1. Each device must have its own pool.
+ */
+static inline int
+validate_num_devices(uint32_t max_nb_devices)
+{
+ if (num_devices > max_nb_devices) {
+ RTE_LOG(ERR, VHOST_PORT, "invalid number of devices\n");
+ return -1;
+ }
+ return 0;
+}
+
+/*
+ * Initialises a given port using global settings and with the rx buffers
+ * coming from the mbuf_pool passed as parameter
+ */
+static inline int
+port_init(uint8_t port)
+{
+ struct rte_eth_dev_info dev_info;
+ struct rte_eth_conf port_conf;
+ uint16_t rx_rings, tx_rings;
+ uint16_t rx_ring_size, tx_ring_size;
+ int retval;
+ uint16_t q;
+
+ /* The max pool number from dev_info will be used to validate the pool number specified in cmd line */
+ rte_eth_dev_info_get (port, &dev_info);
+
+ /*configure the number of supported virtio devices based on VMDQ limits */
+ num_devices = dev_info.max_vmdq_pools;
+ num_queues = dev_info.max_rx_queues;
+
+ if (zero_copy) {
+ rx_ring_size = num_rx_descriptor;
+ tx_ring_size = num_tx_descriptor;
+ tx_rings = dev_info.max_tx_queues;
+ } else {
+ rx_ring_size = RTE_TEST_RX_DESC_DEFAULT;
+ tx_ring_size = RTE_TEST_TX_DESC_DEFAULT;
+ tx_rings = (uint16_t)rte_lcore_count();
+ }
+
+ retval = validate_num_devices(MAX_DEVICES);
+ if (retval < 0)
+ return retval;
+
+ /* Get port configuration. */
+ retval = get_eth_conf(&port_conf, num_devices);
+ if (retval < 0)
+ return retval;
+
+ if (port >= rte_eth_dev_count()) return -1;
+
+ rx_rings = (uint16_t)num_queues,
+ /* Configure ethernet device. */
+ retval = rte_eth_dev_configure(port, rx_rings, tx_rings, &port_conf);
+ if (retval != 0)
+ return retval;
+
+ /* Setup the queues. */
+ for (q = 0; q < rx_rings; q ++) {
+ retval = rte_eth_rx_queue_setup(port, q, rx_ring_size,
+ rte_eth_dev_socket_id(port), &rx_conf_default,
+ vpool_array[q].pool);
+ if (retval < 0)
+ return retval;
+ }
+ for (q = 0; q < tx_rings; q ++) {
+ retval = rte_eth_tx_queue_setup(port, q, tx_ring_size,
+ rte_eth_dev_socket_id(port), &tx_conf_default);
+ if (retval < 0)
+ return retval;
+ }
+
+ /* Start the device. */
+ retval = rte_eth_dev_start(port);
+ if (retval < 0) {
+ RTE_LOG(ERR, VHOST_DATA, "Failed to start the device.\n");
+ return retval;
+ }
+
+ rte_eth_macaddr_get(port, &vmdq_ports_eth_addr[port]);
+ RTE_LOG(INFO, VHOST_PORT, "Max virtio devices supported: %u\n", num_devices);
+ RTE_LOG(INFO, VHOST_PORT, "Port %u MAC: %02"PRIx8" %02"PRIx8" %02"PRIx8
+ " %02"PRIx8" %02"PRIx8" %02"PRIx8"\n",
+ (unsigned)port,
+ vmdq_ports_eth_addr[port].addr_bytes[0],
+ vmdq_ports_eth_addr[port].addr_bytes[1],
+ vmdq_ports_eth_addr[port].addr_bytes[2],
+ vmdq_ports_eth_addr[port].addr_bytes[3],
+ vmdq_ports_eth_addr[port].addr_bytes[4],
+ vmdq_ports_eth_addr[port].addr_bytes[5]);
+
+ return 0;
+}
+
+/*
+ * Set character device basename.
+ */
+static int
+us_vhost_parse_basename(const char *q_arg)
+{
+ /* parse number string */
+
+ if (strnlen(q_arg, MAX_BASENAME_SZ) > MAX_BASENAME_SZ)
+ return -1;
+ else
+ snprintf((char*)&dev_basename, MAX_BASENAME_SZ, "%s", q_arg);
+
+ return 0;
+}
+
+/*
+ * Parse the portmask provided at run time.
+ */
+static int
+parse_portmask(const char *portmask)
+{
+ char *end = NULL;
+ unsigned long pm;
+
+ errno = 0;
+
+ /* parse hexadecimal string */
+ pm = strtoul(portmask, &end, 16);
+ if ((portmask[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (pm == 0)
+ return -1;
+
+ return pm;
+
+}
+
+/*
+ * Parse num options at run time.
+ */
+static int
+parse_num_opt(const char *q_arg, uint32_t max_valid_value)
+{
+ char *end = NULL;
+ unsigned long num;
+
+ errno = 0;
+
+ /* parse unsigned int string */
+ num = strtoul(q_arg, &end, 10);
+ if ((q_arg[0] == '\0') || (end == NULL) || (*end != '\0') || (errno != 0))
+ return -1;
+
+ if (num > max_valid_value)
+ return -1;
+
+ return num;
+
+}
+
+/*
+ * Display usage
+ */
+static void
+us_vhost_usage(const char *prgname)
+{
+ RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
+ " --vm2vm [0|1|2]\n"
+ " --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
+ " --dev-basename <name> --dev-index [0-N]\n"
+ " --nb-devices ND\n"
+ " -p PORTMASK: Set mask for ports to be used by application\n"
+ " --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
+ " --rx-retry [0|1]: disable/enable(default) retries on rx. Enable retry if destintation queue is full\n"
+ " --rx-retry-delay [0-N]: timeout(in usecond) between retries on RX. This makes effect only if retries on rx enabled\n"
+ " --rx-retry-num [0-N]: the number of retries on rx. This makes effect only if retries on rx enabled\n"
+ " --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
+ " --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
+ " --dev-basename: The basename to be used for the character device.\n"
+ " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
+ " --zero-copy [0|1]: disable(default)/enable rx/tx "
+ "zero copy\n"
+ " --rx-desc-num [0-N]: the number of descriptors on rx, "
+ "used only when zero copy is enabled.\n"
+ " --tx-desc-num [0-N]: the number of descriptors on tx, "
+ "used only when zero copy is enabled.\n",
+ prgname);
+}
+
+/*
+ * Parse the arguments given in the command line of the application.
+ */
+static int
+us_vhost_parse_args(int argc, char **argv)
+{
+ int opt, ret;
+ int option_index;
+ unsigned i;
+ const char *prgname = argv[0];
+ static struct option long_option[] = {
+ {"vm2vm", required_argument, NULL, 0},
+ {"rx-retry", required_argument, NULL, 0},
+ {"rx-retry-delay", required_argument, NULL, 0},
+ {"rx-retry-num", required_argument, NULL, 0},
+ {"mergeable", required_argument, NULL, 0},
+ {"stats", required_argument, NULL, 0},
+ {"dev-basename", required_argument, NULL, 0},
+ {"dev-index", required_argument, NULL, 0},
+ {"zero-copy", required_argument, NULL, 0},
+ {"rx-desc-num", required_argument, NULL, 0},
+ {"tx-desc-num", required_argument, NULL, 0},
+ {NULL, 0, 0, 0},
+ };
+
+ /* Parse command line */
+ while ((opt = getopt_long(argc, argv, "p:",long_option, &option_index)) != EOF) {
+ switch (opt) {
+ /* Portmask */
+ case 'p':
+ enabled_port_mask = parse_portmask(optarg);
+ if (enabled_port_mask == 0) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid portmask\n");
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ break;
+
+ case 0:
+ /* Enable/disable vm2vm comms. */
+ if (!strncmp(long_option[option_index].name, "vm2vm",
+ MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, (VM2VM_LAST - 1));
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for "
+ "vm2vm [0|1|2]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ vm2vm_mode = (vm2vm_type)ret;
+ }
+ }
+
+ /* Enable/disable retries on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_retry = ret;
+ }
+ }
+
+ /* Specify the retries delay time (in useconds) on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-delay", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-delay [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_delay_time = ret;
+ }
+ }
+
+ /* Specify the retries number on RX. */
+ if (!strncmp(long_option[option_index].name, "rx-retry-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for rx-retry-num [0-N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ burst_rx_retry_num = ret;
+ }
+ }
+
+ /* Enable/disable RX mergeable buffers. */
+ if (!strncmp(long_option[option_index].name, "mergeable", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for mergeable [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ if (ret) {
+ vmdq_conf_default.rxmode.jumbo_frame = 1;
+ vmdq_conf_default.rxmode.max_rx_pkt_len
+ = JUMBO_FRAME_MAX_SIZE;
+ VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
+ }
+ }
+ }
+
+ /* Enable/disable stats. */
+ if (!strncmp(long_option[option_index].name, "stats", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for stats [0..N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ enable_stats = ret;
+ }
+ }
+
+ /* Set character device basename. */
+ if (!strncmp(long_option[option_index].name, "dev-basename", MAX_LONG_OPT_SZ)) {
+ if (us_vhost_parse_basename(optarg) == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device basename (Max %d characters)\n", MAX_BASENAME_SZ);
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ /* Set character device index. */
+ if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, INT32_MAX);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ dev_index = ret;
+ }
+
+ /* Enable/disable rx/tx zero copy. */
+ if (!strncmp(long_option[option_index].name,
+ "zero-copy", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, 1);
+ if (ret == -1) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument"
+ " for zero-copy [0|1]\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else
+ zero_copy = ret;
+
+ if (zero_copy) {
+#ifdef RTE_MBUF_REFCNT
+ RTE_LOG(ERR, VHOST_CONFIG, "Before running "
+ "zero copy vhost APP, please "
+ "disable RTE_MBUF_REFCNT\n"
+ "in config file and then rebuild DPDK "
+ "core lib!\n"
+ "Otherwise please disable zero copy "
+ "flag in command line!\n");
+ return -1;
+#endif
+ }
+ }
+
+ /* Specify the descriptor number on RX. */
+ if (!strncmp(long_option[option_index].name,
+ "rx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for rx-desc-num[0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_rx_descriptor = ret;
+ }
+ }
+
+ /* Specify the descriptor number on TX. */
+ if (!strncmp(long_option[option_index].name,
+ "tx-desc-num", MAX_LONG_OPT_SZ)) {
+ ret = parse_num_opt(optarg, MAX_RING_DESC);
+ if ((ret == -1) || (!POWEROF2(ret))) {
+ RTE_LOG(INFO, VHOST_CONFIG,
+ "Invalid argument for tx-desc-num [0-N],"
+ "power of 2 required.\n");
+ us_vhost_usage(prgname);
+ return -1;
+ } else {
+ num_tx_descriptor = ret;
+ }
+ }
+
+ break;
+
+ /* Invalid option - print options. */
+ default:
+ us_vhost_usage(prgname);
+ return -1;
+ }
+ }
+
+ for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
+ if (enabled_port_mask & (1 << i))
+ ports[num_ports++] = (uint8_t)i;
+ }
+
+ if ((num_ports == 0) || (num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if ((zero_copy == 1) && (vm2vm_mode == VM2VM_SOFTWARE)) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Vhost zero copy doesn't support software vm2vm,"
+ "please specify 'vm2vm 2' to use hardware vm2vm.\n");
+ return -1;
+ }
+
+ if ((zero_copy == 1) && (vmdq_conf_default.rxmode.jumbo_frame == 1)) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Vhost zero copy doesn't support jumbo frame,"
+ "please specify '--mergeable 0' to disable the "
+ "mergeable feature.\n");
+ return -1;
+ }
+
+ return 0;
+}
+
+/*
+ * Update the global var NUM_PORTS and array PORTS according to system ports number
+ * and return valid ports number
+ */
+static unsigned check_ports_num(unsigned nb_ports)
+{
+ unsigned valid_num_ports = num_ports;
+ unsigned portid;
+
+ if (num_ports > nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port number(%u) exceeds total system port number(%u)\n",
+ num_ports, nb_ports);
+ num_ports = nb_ports;
+ }
+
+ for (portid = 0; portid < num_ports; portid ++) {
+ if (ports[portid] >= nb_ports) {
+ RTE_LOG(INFO, VHOST_PORT, "\nSpecified port ID(%u) exceeds max system port ID(%u)\n",
+ ports[portid], (nb_ports - 1));
+ ports[portid] = INVALID_PORT_ID;
+ valid_num_ports--;
+ }
+ }
+ return valid_num_ports;
+}
+
+/*
+ * Macro to print out packet contents. Wrapped in debug define so that the
+ * data path is not effected when debug is disabled.
+ */
+#ifdef DEBUG
+#define PRINT_PACKET(device, addr, size, header) do { \
+ char *pkt_addr = (char*)(addr); \
+ unsigned int index; \
+ char packet[MAX_PRINT_BUFF]; \
+ \
+ if ((header)) \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Header size %d: ", (device->device_fh), (size)); \
+ else \
+ snprintf(packet, MAX_PRINT_BUFF, "(%"PRIu64") Packet size %d: ", (device->device_fh), (size)); \
+ for (index = 0; index < (size); index++) { \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), \
+ "%02hhx ", pkt_addr[index]); \
+ } \
+ snprintf(packet + strnlen(packet, MAX_PRINT_BUFF), MAX_PRINT_BUFF - strnlen(packet, MAX_PRINT_BUFF), "\n"); \
+ \
+ LOG_DEBUG(VHOST_DATA, "%s", packet); \
+} while(0)
+#else
+#define PRINT_PACKET(device, addr, size, header) do{} while(0)
+#endif
+
+/*
+ * Function to convert guest physical addresses to vhost virtual addresses. This
+ * is used to convert virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
+{
+ struct virtio_memory_regions *region;
+ uint32_t regionidx;
+ uint64_t vhost_va = 0;
+
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ region = &dev->mem->regions[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_va = region->address_offset + guest_pa;
+ break;
+ }
+ }
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
+ dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
+
+ return vhost_va;
+}
+
+/*
+ * Function to convert guest physical addresses to vhost physical addresses.
+ * This is used to convert virtio buffer addresses.
+ */
+static inline uint64_t __attribute__((always_inline))
+gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
+ uint32_t buf_len, hpa_type *addr_type)
+{
+ struct virtio_memory_regions_hpa *region;
+ uint32_t regionidx;
+ uint64_t vhost_pa = 0;
+
+ *addr_type = PHYS_ADDR_INVALID;
+
+ for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
+ region = &dev->mem->regions_hpa[regionidx];
+ if ((guest_pa >= region->guest_phys_address) &&
+ (guest_pa <= region->guest_phys_address_end)) {
+ vhost_pa = region->host_phys_addr_offset + guest_pa;
+ if (likely((guest_pa + buf_len - 1)
+ <= region->guest_phys_address_end))
+ *addr_type = PHYS_ADDR_CONTINUOUS;
+ else
+ *addr_type = PHYS_ADDR_CROSS_SUBREG;
+ break;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
+ dev->device_fh, (void *)(uintptr_t)guest_pa,
+ (void *)(uintptr_t)vhost_pa);
+
+ return vhost_pa;
+}
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works when mergeable is disabled.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
+ uint64_t buff_addr = 0;
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint16_t free_entries;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ /* As many data cores may want access to available buffers, they need to be reserved. */
+ do {
+ res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ free_entries = (avail_idx - res_base_idx);
+ /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (count == 0)
+ return 0;
+
+ res_end_idx = res_base_idx + count;
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
+ res_end_idx);
+ } while (unlikely(success == 0));
+ res_cur_idx = res_base_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
+
+ /* Prefetch available ring to retrieve indexes. */
+ rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (res_cur_idx != res_end_idx) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+
+ /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ /* Copy virtio_hdr to packet and increment buffer address */
+ buff_hdr_addr = buff_addr;
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ buff_addr += vq->vhost_hlen;
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
+
+ /* Copy mbuf data to buffer */
+ rte_memcpy((void *)(uintptr_t)buff_addr,
+ rte_pktmbuf_mtod(buff, const void *),
+ rte_pktmbuf_data_len(buff));
+ PRINT_PACKET(dev, (uintptr_t)buff_addr,
+ rte_pktmbuf_data_len(buff), 0);
+
+ res_cur_idx++;
+ packet_success++;
+
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (res_cur_idx < res_end_idx) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ /* Wait until it's our turn to add our buffer to the used ring. */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ return count;
+}
+
+static inline uint32_t __attribute__((always_inline))
+copy_from_mbuf_to_vring(struct virtio_net *dev,
+ uint16_t res_base_idx, uint16_t res_end_idx,
+ struct rte_mbuf *pkt)
+{
+ uint32_t vec_idx = 0;
+ uint32_t entry_success = 0;
+ struct vhost_virtqueue *vq;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
+ {0, 0, 0, 0, 0, 0}, 0};
+ uint16_t cur_idx = res_base_idx;
+ uint64_t vb_addr = 0;
+ uint64_t vb_hdr_addr = 0;
+ uint32_t seg_offset = 0;
+ uint32_t vb_offset = 0;
+ uint32_t seg_avail;
+ uint32_t vb_avail;
+ uint32_t cpy_len, entry_len;
+
+ if (pkt == NULL)
+ return 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
+ "End Index %d\n",
+ dev->device_fh, cur_idx, res_end_idx);
+
+ /*
+ * Convert from gpa to vva
+ * (guest physical addr -> vhost virtual addr)
+ */
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ vb_addr =
+ gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
+ vb_hdr_addr = vb_addr;
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+
+ virtio_hdr.num_buffers = res_end_idx - res_base_idx;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
+ dev->device_fh, virtio_hdr.num_buffers);
+
+ rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
+
+ seg_avail = rte_pktmbuf_data_len(pkt);
+ vb_offset = vq->vhost_hlen;
+ vb_avail =
+ vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
+
+ entry_len = vq->vhost_hlen;
+
+ if (vb_avail == 0) {
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vq->vhost_hlen;
+
+ if ((vq->desc[desc_idx].flags
+ & VRING_DESC_F_NEXT) == 0) {
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ }
+
+ vec_idx++;
+ vb_addr =
+ gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+ vb_offset = 0;
+ vb_avail = vq->buf_vec[vec_idx].buf_len;
+ }
+
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+
+ while (cpy_len > 0) {
+ /* Copy mbuf data to vring buffer */
+ rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
+ (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
+ cpy_len);
+
+ PRINT_PACKET(dev,
+ (uintptr_t)(vb_addr + vb_offset),
+ cpy_len, 0);
+
+ seg_offset += cpy_len;
+ vb_offset += cpy_len;
+ seg_avail -= cpy_len;
+ vb_avail -= cpy_len;
+ entry_len += cpy_len;
+
+ if (seg_avail != 0) {
+ /*
+ * The virtio buffer in this vring
+ * entry reach to its end.
+ * But the segment doesn't complete.
+ */
+ if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
+ VRING_DESC_F_NEXT) == 0) {
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ }
+
+ vec_idx++;
+ vb_addr = gpa_to_vva(dev,
+ vq->buf_vec[vec_idx].buf_addr);
+ vb_offset = 0;
+ vb_avail = vq->buf_vec[vec_idx].buf_len;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ } else {
+ /*
+ * This current segment complete, need continue to
+ * check if the whole packet complete or not.
+ */
+ pkt = pkt->next;
+ if (pkt != NULL) {
+ /*
+ * There are more segments.
+ */
+ if (vb_avail == 0) {
+ /*
+ * This current buffer from vring is
+ * used up, need fetch next buffer
+ * from buf_vec.
+ */
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vb_offset;
+
+ if ((vq->desc[desc_idx].flags &
+ VRING_DESC_F_NEXT) == 0) {
+ uint16_t wrapped_idx =
+ cur_idx & (vq->size - 1);
+ /*
+ * Update used ring with the
+ * descriptor information
+ */
+ vq->used->ring[wrapped_idx].id
+ = desc_idx;
+ vq->used->ring[wrapped_idx].len
+ = entry_len;
+ entry_success++;
+ entry_len = 0;
+ cur_idx++;
+ }
+
+ /* Get next buffer from buf_vec. */
+ vec_idx++;
+ vb_addr = gpa_to_vva(dev,
+ vq->buf_vec[vec_idx].buf_addr);
+ vb_avail =
+ vq->buf_vec[vec_idx].buf_len;
+ vb_offset = 0;
+ }
+
+ seg_offset = 0;
+ seg_avail = rte_pktmbuf_data_len(pkt);
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ } else {
+ /*
+ * This whole packet completes.
+ */
+ uint32_t desc_idx =
+ vq->buf_vec[vec_idx].desc_idx;
+ vq->desc[desc_idx].len = vb_offset;
+
+ while (vq->desc[desc_idx].flags &
+ VRING_DESC_F_NEXT) {
+ desc_idx = vq->desc[desc_idx].next;
+ vq->desc[desc_idx].len = 0;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[cur_idx & (vq->size - 1)].id
+ = vq->buf_vec[vec_idx].desc_idx;
+ vq->used->ring[cur_idx & (vq->size - 1)].len
+ = entry_len;
+ entry_len = 0;
+ cur_idx++;
+ entry_success++;
+ seg_avail = 0;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ }
+ }
+ }
+
+ return entry_success;
+}
+
+/*
+ * This function adds buffers to the virtio devices RX virtqueue. Buffers can
+ * be received from the physical port or from another virtio device. A packet
+ * count is returned to indicate the number of packets that were succesfully
+ * added to the RX queue. This function works for mergeable RX.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ uint32_t pkt_idx = 0, entry_success = 0;
+ uint32_t retry = 0;
+ uint16_t avail_idx, res_cur_idx;
+ uint16_t res_base_idx, res_end_idx;
+ uint8_t success = 0;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
+ dev->device_fh);
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
+
+ if (count == 0)
+ return 0;
+
+ for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
+ uint32_t secure_len = 0;
+ uint16_t need_cnt;
+ uint32_t vec_idx = 0;
+ uint32_t pkt_len = pkts[pkt_idx]->pkt_len + vq->vhost_hlen;
+ uint16_t i, id;
+
+ do {
+ /*
+ * As many data cores may want access to available
+ * buffers, they need to be reserved.
+ */
+ res_base_idx = vq->last_used_idx_res;
+ res_cur_idx = res_base_idx;
+
+ do {
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ if (unlikely(res_cur_idx == avail_idx)) {
+ /*
+ * If retry is enabled and the queue is
+ * full then we wait and retry to avoid
+ * packet loss.
+ */
+ if (enable_retry) {
+ uint8_t cont = 0;
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx =
+ *((volatile uint16_t *)&vq->avail->idx);
+ if (likely(res_cur_idx != avail_idx)) {
+ cont = 1;
+ break;
+ }
+ }
+ if (cont == 1)
+ continue;
+ }
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") Failed "
+ "to get enough desc from "
+ "vring\n",
+ dev->device_fh);
+ return pkt_idx;
+ } else {
+ uint16_t wrapped_idx =
+ (res_cur_idx) & (vq->size - 1);
+ uint32_t idx =
+ vq->avail->ring[wrapped_idx];
+ uint8_t next_desc;
+
+ do {
+ next_desc = 0;
+ secure_len += vq->desc[idx].len;
+ if (vq->desc[idx].flags &
+ VRING_DESC_F_NEXT) {
+ idx = vq->desc[idx].next;
+ next_desc = 1;
+ }
+ } while (next_desc);
+
+ res_cur_idx++;
+ }
+ } while (pkt_len > secure_len);
+
+ /* vq->last_used_idx_res is atomically updated. */
+ success = rte_atomic16_cmpset(&vq->last_used_idx_res,
+ res_base_idx,
+ res_cur_idx);
+ } while (success == 0);
+
+ id = res_base_idx;
+ need_cnt = res_cur_idx - res_base_idx;
+
+ for (i = 0; i < need_cnt; i++, id++) {
+ uint16_t wrapped_idx = id & (vq->size - 1);
+ uint32_t idx = vq->avail->ring[wrapped_idx];
+ uint8_t next_desc;
+ do {
+ next_desc = 0;
+ vq->buf_vec[vec_idx].buf_addr =
+ vq->desc[idx].addr;
+ vq->buf_vec[vec_idx].buf_len =
+ vq->desc[idx].len;
+ vq->buf_vec[vec_idx].desc_idx = idx;
+ vec_idx++;
+
+ if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
+ idx = vq->desc[idx].next;
+ next_desc = 1;
+ }
+ } while (next_desc);
+ }
+
+ res_end_idx = res_cur_idx;
+
+ entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
+ res_end_idx, pkts[pkt_idx]);
+
+ rte_compiler_barrier();
+
+ /*
+ * Wait until it's our turn to add our buffer
+ * to the used ring.
+ */
+ while (unlikely(vq->last_used_idx != res_base_idx))
+ rte_pause();
+
+ *(volatile uint16_t *)&vq->used->idx += entry_success;
+ vq->last_used_idx = res_end_idx;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+ }
+
+ return count;
+}
+
+/*
+ * Compares a packet destination MAC address to a device MAC address.
+ */
+static inline int __attribute__((always_inline))
+ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
+{
+ return (((*(uint64_t *)ea ^ *(uint64_t *)eb) & MAC_ADDR_CMP) == 0);
+}
+
+/*
+ * This function learns the MAC address of the device and registers this along with a
+ * vlan tag to a VMDQ.
+ */
+static int
+link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
+{
+ struct ether_hdr *pkt_hdr;
+ struct virtio_net_data_ll *dev_ll;
+ int i, ret;
+
+ /* Learn MAC address of guest device from packet */
+ pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
+ return -1;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ for (i = 0; i < ETHER_ADDR_LEN; i++)
+ dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
+
+ /* vlan_tag currently uses the device_id. */
+ dev->vlan_tag = vlan_tags[dev->device_fh];
+
+ /* Print out VMDQ registration info. */
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
+ dev->device_fh,
+ dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
+ dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
+ dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
+ dev->vlan_tag);
+
+ /* Register the MAC address. */
+ ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
+ if (ret)
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
+ dev->device_fh);
+
+ /* Enable stripping of the vlan tag as we handle routing. */
+ rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
+
+ /* Set device as ready for RX. */
+ dev->ready = DEVICE_RX;
+
+ return 0;
+}
+
+/*
+ * Removes MAC address and vlan tag from VMDQ. Ensures that nothing is adding buffers to the RX
+ * queue before disabling RX on the device.
+ */
+static inline void
+unlink_vmdq(struct virtio_net *dev)
+{
+ unsigned i = 0;
+ unsigned rx_count;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+
+ if (dev->ready == DEVICE_RX) {
+ /*clear MAC and VLAN settings*/
+ rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
+ for (i = 0; i < 6; i++)
+ dev->mac_address.addr_bytes[i] = 0;
+
+ dev->vlan_tag = 0;
+
+ /*Clear out the receive buffers*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+
+ while (rx_count) {
+ for (i = 0; i < rx_count; i++)
+ rte_pktmbuf_free(pkts_burst[i]);
+
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ }
+
+ dev->ready = DEVICE_MAC_LEARNING;
+ }
+}
+
+/*
+ * Check if the packet destination MAC address is for a local device. If so then put
+ * the packet on that devices RX queue. If not then return.
+ */
+static inline unsigned __attribute__((always_inline))
+virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
+{
+ struct virtio_net_data_ll *dev_ll;
+ struct ether_hdr *pkt_hdr;
+ uint64_t ret = 0;
+
+ pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /*get the used devices list*/
+ dev_ll = ll_root_used;
+
+ while (dev_ll != NULL) {
+ if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+
+ /* Drop the packet if the TX packet is destined for the TX device. */
+ if (dev_ll->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
+ dev_ll->dev->device_fh);
+ return 0;
+ }
+
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
+
+ if (dev_ll->dev->remove) {
+ /*drop the packet if the device is marked for removal*/
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
+ } else {
+ uint32_t mergeable =
+ dev_ll->dev->features &
+ (1 << VIRTIO_NET_F_MRG_RXBUF);
+
+ /*send the packet to the local virtio device*/
+ if (likely(mergeable == 0))
+ ret = virtio_dev_rx(dev_ll->dev, &m, 1);
+ else
+ ret = virtio_dev_merge_rx(dev_ll->dev,
+ &m, 1);
+
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ 1);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
+ ret);
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx += ret;
+ }
+ }
+
+ return 0;
+ }
+ dev_ll = dev_ll->next;
+ }
+
+ return -1;
+}
+
+/*
+ * This function routes the TX packet to the correct interface. This may be a local device
+ * or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
+{
+ struct mbuf_table *tx_q;
+ struct vlan_ethhdr *vlan_hdr;
+ struct rte_mbuf **m_table;
+ struct rte_mbuf *mbuf, *prev;
+ unsigned len, ret, offset = 0;
+ const uint16_t lcore_id = rte_lcore_id();
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+
+ /*check if destination is local VM*/
+ if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
+ return;
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ while (dev_ll != NULL) {
+ if ((dev_ll->dev->ready == DEVICE_RX)
+ && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+ /*
+ * Drop the packet if the TX packet is
+ * destined for the TX device.
+ */
+ if (dev_ll->dev->device_fh == dev->device_fh) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ " MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->dev->device_fh);
+ return;
+ }
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is external\n", dev->device_fh);
+
+ /*Add packet to the port tx queue*/
+ tx_q = &lcore_tx_queue[lcore_id];
+ len = tx_q->len;
+
+ /* Allocate an mbuf and populate the structure. */
+ mbuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(mbuf == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ mbuf->data_len = m->data_len + VLAN_HLEN + offset;
+ mbuf->pkt_len = m->pkt_len + VLAN_HLEN + offset;
+ mbuf->nb_segs = m->nb_segs;
+
+ /* Copy ethernet header to mbuf. */
+ rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
+ rte_pktmbuf_mtod(m, const void *),
+ ETH_HLEN);
+
+
+ /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
+ vlan_hdr = rte_pktmbuf_mtod(mbuf, struct vlan_ethhdr *);
+ vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
+ vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+ vlan_hdr->h_vlan_TCI = htons(vlan_tag);
+
+ /* Copy the remaining packet contents to the mbuf. */
+ rte_memcpy((void *)(rte_pktmbuf_mtod(mbuf, uint8_t *) + VLAN_ETH_HLEN),
+ (const void *)(rte_pktmbuf_mtod(m, uint8_t *) + ETH_HLEN),
+ (m->data_len - ETH_HLEN));
+
+ /* Copy the remaining segments for the whole packet. */
+ prev = mbuf;
+ while (m->next) {
+ /* Allocate an mbuf and populate the structure. */
+ struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(next_mbuf == NULL)) {
+ rte_pktmbuf_free(mbuf);
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ m = m->next;
+ prev->next = next_mbuf;
+ prev = next_mbuf;
+ next_mbuf->data_len = m->data_len;
+
+ /* Copy data to next mbuf. */
+ rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
+ rte_pktmbuf_mtod(m, const void *), m->data_len);
+ }
+
+ tx_q->m_table[len] = mbuf;
+ len++;
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+ /* Free any buffers not handled by TX and update the port stats. */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ }
+
+ tx_q->len = len;
+ return;
+}
+
+static inline void __attribute__((always_inline))
+virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ if (free_entries > MAX_PKT_BURST)
+ free_entries = MAX_PKT_BURST;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void*)(uintptr_t)buff_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (packet_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[packet_success];
+ vq->used->ring[used_idx].len = 0;
+
+ /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
+ m.data_len = desc->len;
+ m.pkt_len = desc->len;
+ m.data_off = 0;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+ virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
+
+ vq->last_used_idx++;
+ packet_success++;
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += packet_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+/* This function works for TX packets with mergeable feature enabled. */
+static inline void __attribute__((always_inline))
+virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
+{
+ struct rte_mbuf *m, *prev;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t vb_addr = 0;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t used_idx;
+ uint32_t i;
+ uint16_t free_entries, entry_success = 0;
+ uint16_t avail_idx;
+ uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
+ + RTE_PKTMBUF_HEADROOM);
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
+ dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ /*get the number of free entries in the ring*/
+ free_entries = (avail_idx - vq->last_used_idx);
+
+ /* Limit to MAX_PKT_BURST. */
+ free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[entry_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (entry_success < free_entries) {
+ uint32_t vb_avail, vb_offset;
+ uint32_t seg_avail, seg_offset;
+ uint32_t cpy_len;
+ uint32_t seg_num = 0;
+ struct rte_mbuf *cur;
+ uint8_t alloc_err = 0;
+
+ desc = &vq->desc[head[entry_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ vb_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+
+ used_idx = vq->last_used_idx & (vq->size - 1);
+
+ if (entry_success < (free_entries - 1)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[entry_success+1]]);
+ rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
+ }
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = head[entry_success];
+ vq->used->ring[used_idx].len = 0;
+
+ vb_offset = 0;
+ vb_avail = desc->len;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+
+ PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
+
+ /* Allocate an mbuf and populate the structure. */
+ m = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(m == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "Failed to allocate memory for mbuf.\n");
+ return;
+ }
+
+ seg_num++;
+ cur = m;
+ prev = m;
+ while (cpy_len != 0) {
+ rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
+ (void *)((uintptr_t)(vb_addr + vb_offset)),
+ cpy_len);
+
+ seg_offset += cpy_len;
+ vb_offset += cpy_len;
+ vb_avail -= cpy_len;
+ seg_avail -= cpy_len;
+
+ if (vb_avail != 0) {
+ /*
+ * The segment reachs to its end,
+ * while the virtio buffer in TX vring has
+ * more data to be copied.
+ */
+ cur->data_len = seg_offset;
+ m->pkt_len += seg_offset;
+ /* Allocate mbuf and populate the structure. */
+ cur = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(cur == NULL)) {
+ RTE_LOG(ERR, VHOST_DATA, "Failed to "
+ "allocate memory for mbuf.\n");
+ rte_pktmbuf_free(m);
+ alloc_err = 1;
+ break;
+ }
+
+ seg_num++;
+ prev->next = cur;
+ prev = cur;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ } else {
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ /*
+ * There are more virtio buffers in
+ * same vring entry need to be copied.
+ */
+ if (seg_avail == 0) {
+ /*
+ * The current segment hasn't
+ * room to accomodate more
+ * data.
+ */
+ cur->data_len = seg_offset;
+ m->pkt_len += seg_offset;
+ /*
+ * Allocate an mbuf and
+ * populate the structure.
+ */
+ cur = rte_pktmbuf_alloc(mbuf_pool);
+ if (unlikely(cur == NULL)) {
+ RTE_LOG(ERR,
+ VHOST_DATA,
+ "Failed to "
+ "allocate memory "
+ "for mbuf\n");
+ rte_pktmbuf_free(m);
+ alloc_err = 1;
+ break;
+ }
+ seg_num++;
+ prev->next = cur;
+ prev = cur;
+ seg_offset = 0;
+ seg_avail = buf_size;
+ }
+
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ vb_addr = gpa_to_vva(dev, desc->addr);
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)vb_addr);
+ vb_offset = 0;
+ vb_avail = desc->len;
+
+ PRINT_PACKET(dev, (uintptr_t)vb_addr,
+ desc->len, 0);
+ } else {
+ /* The whole packet completes. */
+ cur->data_len = seg_offset;
+ m->pkt_len += seg_offset;
+ vb_avail = 0;
+ }
+ }
+
+ cpy_len = RTE_MIN(vb_avail, seg_avail);
+ }
+
+ if (unlikely(alloc_err == 1))
+ break;
+
+ m->nb_segs = seg_num;
+
+ /*
+ * If this is the first received packet we need to learn
+ * the MAC and setup VMDQ
+ */
+ if (dev->ready == DEVICE_MAC_LEARNING) {
+ if (dev->remove || (link_vmdq(dev, m) == -1)) {
+ /*
+ * Discard frame if device is scheduled for
+ * removal or a duplicate MAC address is found.
+ */
+ entry_success = free_entries;
+ vq->last_used_idx += entry_success;
+ rte_pktmbuf_free(m);
+ break;
+ }
+ }
+
+ virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
+ vq->last_used_idx++;
+ entry_success++;
+ rte_pktmbuf_free(m);
+ }
+
+ rte_compiler_barrier();
+ vq->used->idx += entry_success;
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered with the
+ * core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
+ * with all devices in the main linked list.
+ */
+static int
+switch_worker(__attribute__((unused)) void *arg)
+{
+ struct rte_mempool *mbuf_pool = arg;
+ struct virtio_net *dev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret, i;
+ const uint16_t lcore_id = rte_lcore_id();
+ const uint16_t num_cores = (uint16_t)rte_lcore_count();
+ uint16_t rx_count = 0;
+ uint32_t mergeable = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ tx_q = &lcore_tx_queue[lcore_id];
+ for (i = 0; i < num_cores; i ++) {
+ if (lcore_ids[i] == lcore_id) {
+ tx_q->txq_id = i;
+ break;
+ }
+ }
+
+ while(1) {
+ cur_tsc = rte_rdtsc();
+ /*
+ * TX burst queue drain
+ */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA, "TX queue drained after timeout with burst size %u \n", tx_q->len);
+
+ /*Tx any packets in the queue*/
+ ret = rte_eth_tx_burst(ports[0], (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+
+ tx_q->len = 0;
+ }
+
+ prev_tsc = cur_tsc;
+
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+ /*
+ * Inform the configuration core that we have exited the linked list and that no devices are
+ * in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /*
+ * Process devices
+ */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while (dev_ll != NULL) {
+ /*get virtio device ID*/
+ dev = dev_ll->dev;
+ mergeable =
+ dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
+
+ if (dev->remove) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(dev);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+ if (likely(dev->ready == DEVICE_RX)) {
+ /*Handle guest RX*/
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+
+ if (rx_count) {
+ if (likely(mergeable == 0))
+ ret_count =
+ virtio_dev_rx(dev,
+ pkts_burst, rx_count);
+ else
+ ret_count =
+ virtio_dev_merge_rx(dev,
+ pkts_burst, rx_count);
+
+ if (enable_stats) {
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ rx_count);
+ rte_atomic64_add(
+ &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ rte_pktmbuf_free(pkts_burst[rx_count]);
+ }
+
+ }
+ }
+
+ if (!dev->remove) {
+ /*Handle guest TX*/
+ if (likely(mergeable == 0))
+ virtio_dev_tx(dev, mbuf_pool);
+ else
+ virtio_dev_merge_tx(dev, mbuf_pool);
+ }
+
+ /*move to the next device in the list*/
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+/*
+ * This function gets available ring number for zero copy rx.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_num_zcp(struct virtio_net *dev)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ return (uint32_t)(avail_idx - vq->last_used_idx_res);
+}
+
+/*
+ * This function gets available ring index for zero copy rx,
+ * it will retry 'burst_rx_retry_num' times till it get enough ring index.
+ * Only one thread will call this funciton for a paticular virtio device,
+ * so, it is designed as non-thread-safe function.
+ */
+static inline uint32_t __attribute__((always_inline))
+get_available_ring_index_zcp(struct virtio_net *dev,
+ uint16_t *res_base_idx, uint32_t count)
+{
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_RXQ];
+ uint16_t avail_idx;
+ uint32_t retry = 0;
+ uint16_t free_entries;
+
+ *res_base_idx = vq->last_used_idx_res;
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") in get_available_ring_index_zcp: "
+ "avail idx: %d, "
+ "res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx, *res_base_idx,
+ free_entries);
+
+ /*
+ * If retry is enabled and the queue is full then we wait
+ * and retry to avoid packet loss.
+ */
+ if (enable_retry && unlikely(count > free_entries)) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+ free_entries = (avail_idx - *res_base_idx);
+ if (count <= free_entries)
+ break;
+ }
+ }
+
+ /*check that we have enough buffers*/
+ if (unlikely(count > free_entries))
+ count = free_entries;
+
+ if (unlikely(count == 0)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") Fail in get_available_ring_index_zcp: "
+ "avail idx: %d, res base idx:%d, free entries:%d\n",
+ dev->device_fh, avail_idx,
+ *res_base_idx, free_entries);
+ return 0;
+ }
+
+ vq->last_used_idx_res = *res_base_idx + count;
+
+ return count;
+}
+
+/*
+ * This function put descriptor back to used list.
+ */
+static inline void __attribute__((always_inline))
+put_desc_to_used_list_zcp(struct vhost_virtqueue *vq, uint16_t desc_idx)
+{
+ uint16_t res_cur_idx = vq->last_used_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id = (uint32_t)desc_idx;
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len = 0;
+ rte_compiler_barrier();
+ *(volatile uint16_t *)&vq->used->idx += 1;
+ vq->last_used_idx += 1;
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+}
+
+/*
+ * This function get available descriptor from vitio vring and un-attached mbuf
+ * from vpool->ring, and then attach them together. It needs adjust the offset
+ * for buff_addr and phys_addr accroding to PMD implementation, otherwise the
+ * frame data may be put to wrong location in mbuf.
+ */
+static inline void __attribute__((always_inline))
+attach_rxmbuf_zcp(struct virtio_net *dev)
+{
+ uint16_t res_base_idx, desc_idx;
+ uint64_t buff_addr, phys_addr;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *mbuf = NULL;
+ struct vpool *vpool;
+ hpa_type addr_type;
+
+ vpool = &vpool_array[dev->vmdq_rx_q];
+ vq = dev->virtqueue[VIRTIO_RXQ];
+
+ do {
+ if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
+ 1) != 1))
+ return;
+ desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
+
+ desc = &vq->desc[desc_idx];
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc = &vq->desc[desc->next];
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
+ &addr_type);
+ } else {
+ buff_addr = gpa_to_vva(dev,
+ desc->addr + vq->vhost_hlen);
+ phys_addr = gpa_to_hpa(dev,
+ desc->addr + vq->vhost_hlen,
+ desc->len, &addr_type);
+ }
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Invalid frame buffer"
+ " address found when attaching RX frame buffer"
+ " address!\n", dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching RX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ continue;
+ }
+ } while (unlikely(phys_addr == 0));
+
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: "
+ "ring_sc_dequeue fail.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (unlikely(vpool->buf_size > desc->len)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: frame buffer "
+ "length(%d) of descriptor idx: %d less than room "
+ "size required: %d\n",
+ dev->device_fh, desc->len, desc_idx, vpool->buf_size);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ return;
+ }
+
+ mbuf->buf_addr = (void *)(uintptr_t)(buff_addr - RTE_PKTMBUF_HEADROOM);
+ mbuf->data_off = RTE_PKTMBUF_HEADROOM;
+ mbuf->buf_physaddr = phys_addr - RTE_PKTMBUF_HEADROOM;
+ mbuf->data_len = desc->len;
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in attach_rxmbuf_zcp: res base idx:%d, "
+ "descriptor idx:%d\n",
+ dev->device_fh, res_base_idx, desc_idx);
+
+ __rte_mbuf_raw_free(mbuf);
+
+ return;
+}
+
+/*
+ * Detach an attched packet mbuf -
+ * - restore original mbuf address and length values.
+ * - reset pktmbuf data and data_len to their default values.
+ * All other fields of the given packet mbuf will be left intact.
+ *
+ * @param m
+ * The attached packet mbuf.
+ */
+static inline void pktmbuf_detach_zcp(struct rte_mbuf *m)
+{
+ const struct rte_mempool *mp = m->pool;
+ void *buf = RTE_MBUF_TO_BADDR(m);
+ uint32_t buf_ofs;
+ uint32_t buf_len = mp->elt_size - sizeof(*m);
+ m->buf_physaddr = rte_mempool_virt2phy(mp, m) + sizeof(*m);
+
+ m->buf_addr = buf;
+ m->buf_len = (uint16_t)buf_len;
+
+ buf_ofs = (RTE_PKTMBUF_HEADROOM <= m->buf_len) ?
+ RTE_PKTMBUF_HEADROOM : m->buf_len;
+ m->data_off = buf_ofs;
+
+ m->data_len = 0;
+}
+
+/*
+ * This function is called after packets have been transimited. It fetchs mbuf
+ * from vpool->pool, detached it and put into vpool->ring. It also update the
+ * used index and kick the guest if necessary.
+ */
+static inline uint32_t __attribute__((always_inline))
+txmbuf_clean_zcp(struct virtio_net *dev, struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf;
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ uint32_t used_idx = vq->last_used_idx & (vq->size - 1);
+ uint32_t index = 0;
+ uint32_t mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool before "
+ "clean is: %d\n",
+ dev->device_fh, mbuf_count);
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring before "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, mbuf);
+
+ /* Update used index buffer information. */
+ vq->used->ring[used_idx].id = MBUF_HEADROOM_UINT32(mbuf);
+ vq->used->ring[used_idx].len = 0;
+
+ used_idx = (used_idx + 1) & (vq->size - 1);
+ }
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in mempool after "
+ "clean is: %d\n",
+ dev->device_fh, rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: mbuf count in ring after "
+ "clean is : %d\n",
+ dev->device_fh, rte_ring_count(vpool->ring));
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: before updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ vq->last_used_idx += mbuf_count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in txmbuf_clean_zcp: after updated "
+ "vq->last_used_idx:%d\n",
+ dev->device_fh, vq->last_used_idx);
+
+ rte_compiler_barrier();
+
+ *(volatile uint16_t *)&vq->used->idx += mbuf_count;
+
+ /* Kick guest if required. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return 0;
+}
+
+/*
+ * This function is called when a virtio device is destroy.
+ * It fetchs mbuf from vpool->pool, and detached it, and put into vpool->ring.
+ */
+static void mbuf_destroy_zcp(struct vpool *vpool)
+{
+ struct rte_mbuf *mbuf = NULL;
+ uint32_t index, mbuf_count = rte_mempool_count(vpool->pool);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool before "
+ "mbuf_destroy_zcp is: %d\n",
+ mbuf_count);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring before "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+
+ for (index = 0; index < mbuf_count; index++) {
+ mbuf = __rte_mbuf_raw_alloc(vpool->pool);
+ if (likely(mbuf != NULL)) {
+ if (likely(RTE_MBUF_INDIRECT(mbuf)))
+ pktmbuf_detach_zcp(mbuf);
+ rte_ring_sp_enqueue(vpool->ring, (void *)mbuf);
+ }
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in mempool after "
+ "mbuf_destroy_zcp is: %d\n",
+ rte_mempool_count(vpool->pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in mbuf_destroy_zcp: mbuf count in ring after "
+ "mbuf_destroy_zcp is : %d\n",
+ rte_ring_count(vpool->ring));
+}
+
+/*
+ * This function update the use flag and counter.
+ */
+static inline uint32_t __attribute__((always_inline))
+virtio_dev_rx_zcp(struct virtio_net *dev, struct rte_mbuf **pkts,
+ uint32_t count)
+{
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ struct rte_mbuf *buff;
+ /* The virtio_hdr is initialised to 0. */
+ struct virtio_net_hdr_mrg_rxbuf virtio_hdr
+ = {{0, 0, 0, 0, 0, 0}, 0};
+ uint64_t buff_hdr_addr = 0;
+ uint32_t head[MAX_PKT_BURST], packet_len = 0;
+ uint32_t head_idx, packet_success = 0;
+ uint16_t res_cur_idx;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
+
+ if (count == 0)
+ return 0;
+
+ vq = dev->virtqueue[VIRTIO_RXQ];
+ count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
+
+ res_cur_idx = vq->last_used_idx;
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n",
+ dev->device_fh, res_cur_idx, res_cur_idx + count);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (head_idx = 0; head_idx < count; head_idx++)
+ head[head_idx] = MBUF_HEADROOM_UINT32(pkts[head_idx]);
+
+ /*Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+
+ while (packet_success != count) {
+ /* Get descriptor from available ring */
+ desc = &vq->desc[head[packet_success]];
+
+ buff = pkts[packet_success];
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: update the used idx for "
+ "pkt[%d] descriptor idx: %d\n",
+ dev->device_fh, packet_success,
+ MBUF_HEADROOM_UINT32(buff));
+
+ PRINT_PACKET(dev,
+ (uintptr_t)(((uint64_t)(uintptr_t)buff->buf_addr)
+ + RTE_PKTMBUF_HEADROOM),
+ rte_pktmbuf_data_len(buff), 0);
+
+ /* Buffer address translation for virtio header. */
+ buff_hdr_addr = gpa_to_vva(dev, desc->addr);
+ packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
+
+ /*
+ * If the descriptors are chained the header and data are
+ * placed in separate buffers.
+ */
+ if (desc->flags & VRING_DESC_F_NEXT) {
+ desc->len = vq->vhost_hlen;
+ desc = &vq->desc[desc->next];
+ desc->len = rte_pktmbuf_data_len(buff);
+ } else {
+ desc->len = packet_len;
+ }
+
+ /* Update used ring with desc information */
+ vq->used->ring[res_cur_idx & (vq->size - 1)].id
+ = head[packet_success];
+ vq->used->ring[res_cur_idx & (vq->size - 1)].len
+ = packet_len;
+ res_cur_idx++;
+ packet_success++;
+
+ /* A header is required per buffer. */
+ rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
+ (const void *)&virtio_hdr, vq->vhost_hlen);
+
+ PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
+
+ if (likely(packet_success < count)) {
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ }
+ }
+
+ rte_compiler_barrier();
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: before update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ *(volatile uint16_t *)&vq->used->idx += count;
+ vq->last_used_idx += count;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in dev_rx_zcp: after update used idx: "
+ "vq.last_used_idx: %d, vq->used->idx: %d\n",
+ dev->device_fh, vq->last_used_idx, vq->used->idx);
+
+ /* Kick the guest if necessary. */
+ if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
+ eventfd_write((int)vq->kickfd, 1);
+
+ return count;
+}
+
+/*
+ * This function routes the TX packet to the correct interface.
+ * This may be a local device or the physical port.
+ */
+static inline void __attribute__((always_inline))
+virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
+ uint32_t desc_idx, uint8_t need_copy)
+{
+ struct mbuf_table *tx_q;
+ struct rte_mbuf **m_table;
+ struct rte_mbuf *mbuf = NULL;
+ unsigned len, ret, offset = 0;
+ struct vpool *vpool;
+ struct virtio_net_data_ll *dev_ll = ll_root_used;
+ struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
+
+ /*Add packet to the port tx queue*/
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ len = tx_q->len;
+
+ /* Allocate an mbuf and populate the structure. */
+ vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
+ rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
+ if (unlikely(mbuf == NULL)) {
+ struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Failed to allocate memory for mbuf.\n",
+ dev->device_fh);
+ put_desc_to_used_list_zcp(vq, desc_idx);
+ return;
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Avoid using a vlan tag from any vm for external pkt, such as
+ * vlan_tags[dev->device_fh], oterwise, it conflicts when pool
+ * selection, MAC address determines it as an external pkt
+ * which should go to network, while vlan tag determine it as
+ * a vm2vm pkt should forward to another vm. Hardware confuse
+ * such a ambiguous situation, so pkt will lost.
+ */
+ vlan_tag = external_pkt_default_vlan_tag;
+ while (dev_ll != NULL) {
+ if (likely(dev_ll->dev->ready == DEVICE_RX) &&
+ ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->dev->mac_address)) {
+
+ /*
+ * Drop the packet if the TX packet is destined
+ * for the TX device.
+ */
+ if (unlikely(dev_ll->dev->device_fh
+ == dev->device_fh)) {
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: Source and destination"
+ "MAC addresses are the same. Dropping "
+ "packet.\n",
+ dev_ll->dev->device_fh);
+ MBUF_HEADROOM_UINT32(mbuf)
+ = (uint32_t)desc_idx;
+ __rte_mbuf_raw_free(mbuf);
+ return;
+ }
+
+ /*
+ * Packet length offset 4 bytes for HW vlan
+ * strip when L2 switch back.
+ */
+ offset = 4;
+ vlan_tag =
+ (uint16_t)
+ vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") TX: pkt to local VM device id:"
+ "(%"PRIu64") vlan tag: %d.\n",
+ dev->device_fh, dev_ll->dev->device_fh,
+ vlan_tag);
+
+ break;
+ }
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ mbuf->nb_segs = m->nb_segs;
+ mbuf->next = m->next;
+ mbuf->data_len = m->data_len + offset;
+ mbuf->pkt_len = mbuf->data_len;
+ if (unlikely(need_copy)) {
+ /* Copy the packet contents to the mbuf. */
+ rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
+ rte_pktmbuf_mtod(m, void *),
+ m->data_len);
+ } else {
+ mbuf->data_off = m->data_off;
+ mbuf->buf_physaddr = m->buf_physaddr;
+ mbuf->buf_addr = m->buf_addr;
+ }
+ mbuf->ol_flags = PKT_TX_VLAN_PKT;
+ mbuf->vlan_tci = vlan_tag;
+ mbuf->l2_len = sizeof(struct ether_hdr);
+ mbuf->l3_len = sizeof(struct ipv4_hdr);
+ MBUF_HEADROOM_UINT32(mbuf) = (uint32_t)desc_idx;
+
+ tx_q->m_table[len] = mbuf;
+ len++;
+
+ LOG_DEBUG(VHOST_DATA,
+ "(%"PRIu64") in tx_route_zcp: pkt: nb_seg: %d, next:%s\n",
+ dev->device_fh,
+ mbuf->nb_segs,
+ (mbuf->next == NULL) ? "null" : "non-null");
+
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].tx_total++;
+ dev_statistics[dev->device_fh].tx++;
+ }
+
+ if (unlikely(len == MAX_PKT_BURST)) {
+ m_table = (struct rte_mbuf **)tx_q->m_table;
+ ret = rte_eth_tx_burst(ports[0],
+ (uint16_t)tx_q->txq_id, m_table, (uint16_t) len);
+
+ /*
+ * Free any buffers not handled by TX and update
+ * the port stats.
+ */
+ if (unlikely(ret < len)) {
+ do {
+ rte_pktmbuf_free(m_table[ret]);
+ } while (++ret < len);
+ }
+
+ len = 0;
+ txmbuf_clean_zcp(dev, vpool);
+ }
+
+ tx_q->len = len;
+
+ return;
+}
+
+/*
+ * This function TX all available packets in virtio TX queue for one
+ * virtio-net device. If it is first packet, it learns MAC address and
+ * setup VMDQ.
+ */
+static inline void __attribute__((always_inline))
+virtio_dev_tx_zcp(struct virtio_net *dev)
+{
+ struct rte_mbuf m;
+ struct vhost_virtqueue *vq;
+ struct vring_desc *desc;
+ uint64_t buff_addr = 0, phys_addr;
+ uint32_t head[MAX_PKT_BURST];
+ uint32_t i;
+ uint16_t free_entries, packet_success = 0;
+ uint16_t avail_idx;
+ uint8_t need_copy = 0;
+ hpa_type addr_type;
+
+ vq = dev->virtqueue[VIRTIO_TXQ];
+ avail_idx = *((volatile uint16_t *)&vq->avail->idx);
+
+ /* If there are no available buffers then return. */
+ if (vq->last_used_idx_res == avail_idx)
+ return;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
+
+ /* Prefetch available ring to retrieve head indexes. */
+ rte_prefetch0(&vq->avail->ring[vq->last_used_idx_res & (vq->size - 1)]);
+
+ /* Get the number of free entries in the ring */
+ free_entries = (avail_idx - vq->last_used_idx_res);
+
+ /* Limit to MAX_PKT_BURST. */
+ free_entries
+ = (free_entries > MAX_PKT_BURST) ? MAX_PKT_BURST : free_entries;
+
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
+ dev->device_fh, free_entries);
+
+ /* Retrieve all of the head indexes first to avoid caching issues. */
+ for (i = 0; i < free_entries; i++)
+ head[i]
+ = vq->avail->ring[(vq->last_used_idx_res + i)
+ & (vq->size - 1)];
+
+ vq->last_used_idx_res += free_entries;
+
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success]]);
+ rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
+
+ while (packet_success < free_entries) {
+ desc = &vq->desc[head[packet_success]];
+
+ /* Discard first buffer as it is the virtio header */
+ desc = &vq->desc[desc->next];
+
+ /* Buffer address translation. */
+ buff_addr = gpa_to_vva(dev, desc->addr);
+ phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
+
+ if (likely(packet_success < (free_entries - 1)))
+ /* Prefetch descriptor index. */
+ rte_prefetch0(&vq->desc[head[packet_success + 1]]);
+
+ if (unlikely(addr_type == PHYS_ADDR_INVALID)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Invalid frame buffer address found"
+ "when TX packets!\n",
+ dev->device_fh);
+ packet_success++;
+ continue;
+ }
+
+ /* Prefetch buffer address. */
+ rte_prefetch0((void *)(uintptr_t)buff_addr);
+
+ /*
+ * Setup dummy mbuf. This is copied to a real mbuf if
+ * transmitted out the physical port.
+ */
+ m.data_len = desc->len;
+ m.nb_segs = 1;
+ m.next = NULL;
+ m.data_off = 0;
+ m.buf_addr = (void *)(uintptr_t)buff_addr;
+ m.buf_physaddr = phys_addr;
+
+ /*
+ * Check if the frame buffer address from guest crosses
+ * sub-region or not.
+ */
+ if (unlikely(addr_type == PHYS_ADDR_CROSS_SUBREG)) {
+ RTE_LOG(ERR, VHOST_DATA,
+ "(%"PRIu64") Frame buffer address cross "
+ "sub-regioin found when attaching TX frame "
+ "buffer address!\n",
+ dev->device_fh);
+ need_copy = 1;
+ } else
+ need_copy = 0;
+
+ PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
+
+ /*
+ * If this is the first received packet we need to learn
+ * the MAC and setup VMDQ
+ */
+ if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
+ if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ /*
+ * Discard frame if device is scheduled for
+ * removal or a duplicate MAC address is found.
+ */
+ packet_success += free_entries;
+ vq->last_used_idx += packet_success;
+ break;
+ }
+ }
+
+ virtio_tx_route_zcp(dev, &m, head[packet_success], need_copy);
+ packet_success++;
+ }
+}
+
+/*
+ * This function is called by each data core. It handles all RX/TX registered
+ * with the core. For TX the specific lcore linked list is used. For RX, MAC
+ * addresses are compared with all devices in the main linked list.
+ */
+static int
+switch_worker_zcp(__attribute__((unused)) void *arg)
+{
+ struct virtio_net *dev = NULL;
+ struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
+ struct virtio_net_data_ll *dev_ll;
+ struct mbuf_table *tx_q;
+ volatile struct lcore_ll_info *lcore_ll;
+ const uint64_t drain_tsc
+ = (rte_get_tsc_hz() + US_PER_S - 1) / US_PER_S
+ * BURST_TX_DRAIN_US;
+ uint64_t prev_tsc, diff_tsc, cur_tsc, ret_count = 0;
+ unsigned ret;
+ const uint16_t lcore_id = rte_lcore_id();
+ uint16_t count_in_ring, rx_count = 0;
+
+ RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
+
+ lcore_ll = lcore_info[lcore_id].lcore_ll;
+ prev_tsc = 0;
+
+ while (1) {
+ cur_tsc = rte_rdtsc();
+
+ /* TX burst queue drain */
+ diff_tsc = cur_tsc - prev_tsc;
+ if (unlikely(diff_tsc > drain_tsc)) {
+ /*
+ * Get mbuf from vpool.pool and detach mbuf and
+ * put back into vpool.ring.
+ */
+ dev_ll = lcore_ll->ll_root_used;
+ while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
+ /* Get virtio device ID */
+ dev = dev_ll->dev;
+
+ if (likely(!dev->remove)) {
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ if (tx_q->len) {
+ LOG_DEBUG(VHOST_DATA,
+ "TX queue drained after timeout"
+ " with burst size %u\n",
+ tx_q->len);
+
+ /*
+ * Tx any packets in the queue
+ */
+ ret = rte_eth_tx_burst(
+ ports[0],
+ (uint16_t)tx_q->txq_id,
+ (struct rte_mbuf **)
+ tx_q->m_table,
+ (uint16_t)tx_q->len);
+ if (unlikely(ret < tx_q->len)) {
+ do {
+ rte_pktmbuf_free(
+ tx_q->m_table[ret]);
+ } while (++ret < tx_q->len);
+ }
+ tx_q->len = 0;
+
+ txmbuf_clean_zcp(dev,
+ &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
+ }
+ }
+ dev_ll = dev_ll->next;
+ }
+ prev_tsc = cur_tsc;
+ }
+
+ rte_prefetch0(lcore_ll->ll_root_used);
+
+ /*
+ * Inform the configuration core that we have exited the linked
+ * list and that no devices are in use if requested.
+ */
+ if (lcore_ll->dev_removal_flag == REQUEST_DEV_REMOVAL)
+ lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+
+ /* Process devices */
+ dev_ll = lcore_ll->ll_root_used;
+
+ while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
+ dev = dev_ll->dev;
+ if (unlikely(dev->remove)) {
+ dev_ll = dev_ll->next;
+ unlink_vmdq(dev);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ continue;
+ }
+
+ if (likely(dev->ready == DEVICE_RX)) {
+ uint32_t index = dev->vmdq_rx_q;
+ uint16_t i;
+ count_in_ring
+ = rte_ring_count(vpool_array[index].ring);
+ uint16_t free_entries
+ = (uint16_t)get_available_ring_num_zcp(dev);
+
+ /*
+ * Attach all mbufs in vpool.ring and put back
+ * into vpool.pool.
+ */
+ for (i = 0;
+ i < RTE_MIN(free_entries,
+ RTE_MIN(count_in_ring, MAX_PKT_BURST));
+ i++)
+ attach_rxmbuf_zcp(dev);
+
+ /* Handle guest RX */
+ rx_count = rte_eth_rx_burst(ports[0],
+ (uint16_t)dev->vmdq_rx_q, pkts_burst,
+ MAX_PKT_BURST);
+
+ if (rx_count) {
+ ret_count = virtio_dev_rx_zcp(dev,
+ pkts_burst, rx_count);
+ if (enable_stats) {
+ dev_statistics[dev->device_fh].rx_total
+ += rx_count;
+ dev_statistics[dev->device_fh].rx
+ += ret_count;
+ }
+ while (likely(rx_count)) {
+ rx_count--;
+ pktmbuf_detach_zcp(
+ pkts_burst[rx_count]);
+ rte_ring_sp_enqueue(
+ vpool_array[index].ring,
+ (void *)pkts_burst[rx_count]);
+ }
+ }
+ }
+
+ if (likely(!dev->remove))
+ /* Handle guest TX */
+ virtio_dev_tx_zcp(dev);
+
+ /* Move to the next device in the list */
+ dev_ll = dev_ll->next;
+ }
+ }
+
+ return 0;
+}
+
+
+/*
+ * Add an entry to a used linked list. A free entry must first be found
+ * in the free linked list using get_data_ll_free_entry();
+ */
+static void
+add_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ /* Set next as NULL and use a compiler barrier to avoid reordering. */
+ ll_dev->next = NULL;
+ rte_compiler_barrier();
+
+ /* If ll == NULL then this is the first device. */
+ if (ll) {
+ /* Increment to the tail of the linked list. */
+ while ((ll->next != NULL) )
+ ll = ll->next;
+
+ ll->next = ll_dev;
+ } else {
+ *ll_root_addr = ll_dev;
+ }
+}
+
+/*
+ * Remove an entry from a used linked list. The entry must then be added to
+ * the free linked list using put_data_ll_free_entry().
+ */
+static void
+rm_data_ll_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev,
+ struct virtio_net_data_ll *ll_dev_last)
+{
+ struct virtio_net_data_ll *ll = *ll_root_addr;
+
+ if (unlikely((ll == NULL) || (ll_dev == NULL)))
+ return;
+
+ if (ll_dev == ll)
+ *ll_root_addr = ll_dev->next;
+ else
+ if (likely(ll_dev_last != NULL))
+ ll_dev_last->next = ll_dev->next;
+ else
+ RTE_LOG(ERR, VHOST_CONFIG, "Remove entry form ll failed.\n");
+}
+
+/*
+ * Find and return an entry from the free linked list.
+ */
+static struct virtio_net_data_ll *
+get_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+ struct virtio_net_data_ll *ll_dev;
+
+ if (ll_free == NULL)
+ return NULL;
+
+ ll_dev = ll_free;
+ *ll_root_addr = ll_free->next;
+
+ return ll_dev;
+}
+
+/*
+ * Place an entry back on to the free linked list.
+ */
+static void
+put_data_ll_free_entry(struct virtio_net_data_ll **ll_root_addr,
+ struct virtio_net_data_ll *ll_dev)
+{
+ struct virtio_net_data_ll *ll_free = *ll_root_addr;
+
+ if (ll_dev == NULL)
+ return;
+
+ ll_dev->next = ll_free;
+ *ll_root_addr = ll_dev;
+}
+
+/*
+ * Creates a linked list of a given size.
+ */
+static struct virtio_net_data_ll *
+alloc_data_ll(uint32_t size)
+{
+ struct virtio_net_data_ll *ll_new;
+ uint32_t i;
+
+ /* Malloc and then chain the linked list. */
+ ll_new = malloc(size * sizeof(struct virtio_net_data_ll));
+ if (ll_new == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for ll_new.\n");
+ return NULL;
+ }
+
+ for (i = 0; i < size - 1; i++) {
+ ll_new[i].dev = NULL;
+ ll_new[i].next = &ll_new[i+1];
+ }
+ ll_new[i].next = NULL;
+
+ return (ll_new);
+}
+
+/*
+ * Create the main linked list along with each individual cores linked list. A used and a free list
+ * are created to manage entries.
+ */
+static int
+init_data_ll (void)
+{
+ int lcore;
+
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll = malloc(sizeof(struct lcore_ll_info));
+ if (lcore_info[lcore].lcore_ll == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Failed to allocate memory for lcore_ll.\n");
+ return -1;
+ }
+
+ lcore_info[lcore].lcore_ll->device_num = 0;
+ lcore_info[lcore].lcore_ll->dev_removal_flag = ACK_DEV_REMOVAL;
+ lcore_info[lcore].lcore_ll->ll_root_used = NULL;
+ if (num_devices % num_switching_cores)
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll((num_devices / num_switching_cores) + 1);
+ else
+ lcore_info[lcore].lcore_ll->ll_root_free = alloc_data_ll(num_devices / num_switching_cores);
+ }
+
+ /* Allocate devices up to a maximum of MAX_DEVICES. */
+ ll_root_free = alloc_data_ll(MIN((num_devices), MAX_DEVICES));
+
+ return 0;
+}
+
+/*
+ * Set virtqueue flags so that we do not receive interrupts.
+ */
+static void
+set_irq_status (struct virtio_net *dev)
+{
+ dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
+ dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
+}
+
+/*
+ * Remove a device from the specific data core linked list and from the main linked list. Synchonization
+ * occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
+ * of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
+ */
+static void
+destroy_device (volatile struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_lcore_dev_cur;
+ struct virtio_net_data_ll *ll_main_dev_cur;
+ struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
+ struct virtio_net_data_ll *ll_main_dev_last = NULL;
+ int lcore;
+
+ dev->flags &= ~VIRTIO_DEV_RUNNING;
+
+ /*set the remove flag. */
+ dev->remove = 1;
+
+ while(dev->ready != DEVICE_SAFE_REMOVE) {
+ rte_pause();
+ }
+
+ /* Search for entry to be removed from lcore ll */
+ ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
+ while (ll_lcore_dev_cur != NULL) {
+ if (ll_lcore_dev_cur->dev == dev) {
+ break;
+ } else {
+ ll_lcore_dev_last = ll_lcore_dev_cur;
+ ll_lcore_dev_cur = ll_lcore_dev_cur->next;
+ }
+ }
+
+ if (ll_lcore_dev_cur == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "(%"PRIu64") Failed to find the dev to be destroy.\n",
+ dev->device_fh);
+ return;
+ }
+
+ /* Search for entry to be removed from main ll */
+ ll_main_dev_cur = ll_root_used;
+ ll_main_dev_last = NULL;
+ while (ll_main_dev_cur != NULL) {
+ if (ll_main_dev_cur->dev == dev) {
+ break;
+ } else {
+ ll_main_dev_last = ll_main_dev_cur;
+ ll_main_dev_cur = ll_main_dev_cur->next;
+ }
+ }
+
+ /* Remove entries from the lcore and main ll. */
+ rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+ rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
+
+ /* Set the dev_removal_flag on each lcore. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ lcore_info[lcore].lcore_ll->dev_removal_flag = REQUEST_DEV_REMOVAL;
+ }
+
+ /*
+ * Once each core has set the dev_removal_flag to ACK_DEV_REMOVAL we can be sure that
+ * they can no longer access the device removed from the linked lists and that the devices
+ * are no longer in use.
+ */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ while (lcore_info[lcore].lcore_ll->dev_removal_flag != ACK_DEV_REMOVAL) {
+ rte_pause();
+ }
+ }
+
+ /* Add the entries back to the lcore and main free ll.*/
+ put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+ put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
+
+ /* Decrement number of device on the lcore. */
+ lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
+
+ if (zero_copy) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ /* Stop the RX queue. */
+ if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to stop "
+ "rx queue:%d\n",
+ dev->device_fh,
+ dev->vmdq_rx_q);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in destroy_device: Start put mbuf in "
+ "mempool back to ring for RX queue: %d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In destroy_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+ }
+
+ vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") destroy_device: Start put mbuf in mempool "
+ "back to ring for TX queue: %d, dev:(%"PRIu64")\n",
+ dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
+ dev->device_fh);
+
+ mbuf_destroy_zcp(vpool);
+ }
+
+}
+
+/*
+ * A new device is added to a data core. First the device is added to the main linked list
+ * and the allocated to a specific data core.
+ */
+static int
+new_device (struct virtio_net *dev)
+{
+ struct virtio_net_data_ll *ll_dev;
+ int lcore, core_add = 0;
+ uint32_t device_num_min = num_devices;
+
+ /* Add device to main ll */
+ ll_dev = get_data_ll_free_entry(&ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
+ "of %d devices per core has been reached\n",
+ dev->device_fh, num_devices);
+ return -1;
+ }
+ ll_dev->dev = dev;
+ add_data_ll_entry(&ll_root_used, ll_dev);
+ ll_dev->dev->vmdq_rx_q
+ = ll_dev->dev->device_fh * (num_queues / num_devices);
+
+ if (zero_copy) {
+ uint32_t index = ll_dev->dev->vmdq_rx_q;
+ uint32_t count_in_ring, i;
+ struct mbuf_table *tx_q;
+
+ count_in_ring = rte_ring_count(vpool_array[index].ring);
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in mempool "
+ "before attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") in new_device: mbuf count in ring "
+ "before attach is : %d\n",
+ dev->device_fh, count_in_ring);
+
+ /*
+ * Attach all mbufs in vpool.ring and put back intovpool.pool.
+ */
+ for (i = 0; i < count_in_ring; i++)
+ attach_rxmbuf_zcp(dev);
+
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "mempool after attach is: %d\n",
+ dev->device_fh,
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
+ "ring after attach is : %d\n",
+ dev->device_fh,
+ rte_ring_count(vpool_array[index].ring));
+
+ tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ tx_q->txq_id = dev->vmdq_rx_q;
+
+ if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ mbuf_destroy_zcp(vpool);
+ return -1;
+ }
+
+ if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to start "
+ "rx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+
+ /* Stop the TX queue. */
+ if (rte_eth_dev_tx_queue_stop(ports[0],
+ dev->vmdq_rx_q) != 0) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "(%"PRIu64") In new_device: Failed to "
+ "stop tx queue:%d\n",
+ dev->device_fh, dev->vmdq_rx_q);
+ }
+
+ mbuf_destroy_zcp(vpool);
+ return -1;
+ }
+
+ }
+
+ /*reset ready flag*/
+ dev->ready = DEVICE_MAC_LEARNING;
+ dev->remove = 0;
+
+ /* Find a suitable lcore to add the device. */
+ RTE_LCORE_FOREACH_SLAVE(lcore) {
+ if (lcore_info[lcore].lcore_ll->device_num < device_num_min) {
+ device_num_min = lcore_info[lcore].lcore_ll->device_num;
+ core_add = lcore;
+ }
+ }
+ /* Add device to lcore ll */
+ ll_dev->dev->coreid = core_add;
+ ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
+ if (ll_dev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
+ dev->ready = DEVICE_SAFE_REMOVE;
+ destroy_device(dev);
+ return -1;
+ }
+ ll_dev->dev = dev;
+ add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
+
+ /* Initialize device stats */
+ memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
+
+ /* Disable notifications. */
+ set_irq_status(dev);
+ lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
+ dev->flags |= VIRTIO_DEV_RUNNING;
+
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
+
+ return 0;
+}
+
+/*
+ * These callback allow devices to be added to the data core when configuration
+ * has been fully complete.
+ */
+static const struct virtio_net_device_ops virtio_net_device_ops =
+{
+ .new_device = new_device,
+ .destroy_device = destroy_device,
+};
+
+/*
+ * This is a thread will wake up after a period to print stats if the user has
+ * enabled them.
+ */
+static void
+print_stats(void)
+{
+ struct virtio_net_data_ll *dev_ll;
+ uint64_t tx_dropped, rx_dropped;
+ uint64_t tx, tx_total, rx, rx_total;
+ uint32_t device_fh;
+ const char clr[] = { 27, '[', '2', 'J', '\0' };
+ const char top_left[] = { 27, '[', '1', ';', '1', 'H','\0' };
+
+ while(1) {
+ sleep(enable_stats);
+
+ /* Clear screen and move to top left */
+ printf("%s%s", clr, top_left);
+
+ printf("\nDevice statistics ====================================");
+
+ dev_ll = ll_root_used;
+ while (dev_ll != NULL) {
+ device_fh = (uint32_t)dev_ll->dev->device_fh;
+ tx_total = dev_statistics[device_fh].tx_total;
+ tx = dev_statistics[device_fh].tx;
+ tx_dropped = tx_total - tx;
+ if (zero_copy == 0) {
+ rx_total = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_total_atomic);
+ rx = rte_atomic64_read(
+ &dev_statistics[device_fh].rx_atomic);
+ } else {
+ rx_total = dev_statistics[device_fh].rx_total;
+ rx = dev_statistics[device_fh].rx;
+ }
+ rx_dropped = rx_total - rx;
+
+ printf("\nStatistics for device %"PRIu32" ------------------------------"
+ "\nTX total: %"PRIu64""
+ "\nTX dropped: %"PRIu64""
+ "\nTX successful: %"PRIu64""
+ "\nRX total: %"PRIu64""
+ "\nRX dropped: %"PRIu64""
+ "\nRX successful: %"PRIu64"",
+ device_fh,
+ tx_total,
+ tx_dropped,
+ tx,
+ rx_total,
+ rx_dropped,
+ rx);
+
+ dev_ll = dev_ll->next;
+ }
+ printf("\n======================================================\n");
+ }
+}
+
+static void
+setup_mempool_tbl(int socket, uint32_t index, char *pool_name,
+ char *ring_name, uint32_t nb_mbuf)
+{
+ uint16_t roomsize = VIRTIO_DESCRIPTOR_LEN_ZCP + RTE_PKTMBUF_HEADROOM;
+ vpool_array[index].pool
+ = rte_mempool_create(pool_name, nb_mbuf, MBUF_SIZE_ZCP,
+ MBUF_CACHE_SIZE_ZCP, sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, (void *)(uintptr_t)roomsize,
+ rte_pktmbuf_init, NULL, socket, 0);
+ if (vpool_array[index].pool != NULL) {
+ vpool_array[index].ring
+ = rte_ring_create(ring_name,
+ rte_align32pow2(nb_mbuf + 1),
+ socket, RING_F_SP_ENQ | RING_F_SC_DEQ);
+ if (likely(vpool_array[index].ring != NULL)) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "mempool is: %d\n",
+ rte_mempool_count(vpool_array[index].pool));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in setup_mempool_tbl: mbuf count in "
+ "ring is: %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ } else {
+ rte_exit(EXIT_FAILURE, "ring_create(%s) failed",
+ ring_name);
+ }
+
+ /* Need consider head room. */
+ vpool_array[index].buf_size = roomsize - RTE_PKTMBUF_HEADROOM;
+ } else {
+ rte_exit(EXIT_FAILURE, "mempool_create(%s) failed", pool_name);
+ }
+}
+
+
+/*
+ * Main function, does initialisation and calls the per-lcore functions. The CUSE
+ * device is also registered here to handle the IOCTLs.
+ */
+int
+MAIN(int argc, char *argv[])
+{
+ struct rte_mempool *mbuf_pool = NULL;
+ unsigned lcore_id, core_id = 0;
+ unsigned nb_ports, valid_num_ports;
+ int ret;
+ uint8_t portid, queue_id = 0;
+ static pthread_t tid;
+
+ /* init EAL */
+ ret = rte_eal_init(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Error with EAL initialization\n");
+ argc -= ret;
+ argv += ret;
+
+ /* parse app arguments */
+ ret = us_vhost_parse_args(argc, argv);
+ if (ret < 0)
+ rte_exit(EXIT_FAILURE, "Invalid argument\n");
+
+ for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
+ if (rte_lcore_is_enabled(lcore_id))
+ lcore_ids[core_id ++] = lcore_id;
+
+ if (rte_lcore_count() > RTE_MAX_LCORE)
+ rte_exit(EXIT_FAILURE,"Not enough cores\n");
+
+ /*set the number of swithcing cores available*/
+ num_switching_cores = rte_lcore_count()-1;
+
+ /* Get the number of physical ports. */
+ nb_ports = rte_eth_dev_count();
+ if (nb_ports > RTE_MAX_ETHPORTS)
+ nb_ports = RTE_MAX_ETHPORTS;
+
+ /*
+ * Update the global var NUM_PORTS and global array PORTS
+ * and get value of var VALID_NUM_PORTS according to system ports number
+ */
+ valid_num_ports = check_ports_num(nb_ports);
+
+ if ((valid_num_ports == 0) || (valid_num_ports > MAX_SUP_PORTS)) {
+ RTE_LOG(INFO, VHOST_PORT, "Current enabled port number is %u,"
+ "but only %u port can be enabled\n",num_ports, MAX_SUP_PORTS);
+ return -1;
+ }
+
+ if (zero_copy == 0) {
+ /* Create the mbuf pool. */
+ mbuf_pool = rte_mempool_create(
+ "MBUF_POOL",
+ NUM_MBUFS_PER_PORT
+ * valid_num_ports,
+ MBUF_SIZE, MBUF_CACHE_SIZE,
+ sizeof(struct rte_pktmbuf_pool_private),
+ rte_pktmbuf_pool_init, NULL,
+ rte_pktmbuf_init, NULL,
+ rte_socket_id(), 0);
+ if (mbuf_pool == NULL)
+ rte_exit(EXIT_FAILURE, "Cannot create mbuf pool\n");
+
+ for (queue_id = 0; queue_id < MAX_QUEUES + 1; queue_id++)
+ vpool_array[queue_id].pool = mbuf_pool;
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ } else {
+ uint32_t nb_mbuf;
+ char pool_name[RTE_MEMPOOL_NAMESIZE];
+ char ring_name[RTE_MEMPOOL_NAMESIZE];
+
+ /*
+ * Zero copy defers queue RX/TX start to the time when guest
+ * finishes its startup and packet buffers from that guest are
+ * available.
+ */
+ rx_conf_default.rx_deferred_start = (uint8_t)zero_copy;
+ rx_conf_default.rx_drop_en = 0;
+ tx_conf_default.tx_deferred_start = (uint8_t)zero_copy;
+ nb_mbuf = num_rx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "rxmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "rxmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(), queue_id,
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ nb_mbuf = num_tx_descriptor
+ + num_switching_cores * MBUF_CACHE_SIZE_ZCP
+ + num_switching_cores * MAX_PKT_BURST;
+
+ for (queue_id = 0; queue_id < MAX_QUEUES; queue_id++) {
+ snprintf(pool_name, sizeof(pool_name),
+ "txmbuf_pool_%u", queue_id);
+ snprintf(ring_name, sizeof(ring_name),
+ "txmbuf_ring_%u", queue_id);
+ setup_mempool_tbl(rte_socket_id(),
+ (queue_id + MAX_QUEUES),
+ pool_name, ring_name, nb_mbuf);
+ }
+
+ if (vm2vm_mode == VM2VM_HARDWARE) {
+ /* Enable VT loop back to let L2 switch to do it. */
+ vmdq_conf_default.rx_adv_conf.vmdq_rx_conf.enable_loop_back = 1;
+ LOG_DEBUG(VHOST_CONFIG,
+ "Enable loop back for L2 switch in vmdq.\n");
+ }
+ }
+ /* Set log level. */
+ rte_set_log_level(LOG_LEVEL);
+
+ /* initialize all ports */
+ for (portid = 0; portid < nb_ports; portid++) {
+ /* skip ports that are not enabled */
+ if ((enabled_port_mask & (1 << portid)) == 0) {
+ RTE_LOG(INFO, VHOST_PORT,
+ "Skipping disabled port %d\n", portid);
+ continue;
+ }
+ if (port_init(portid) != 0)
+ rte_exit(EXIT_FAILURE,
+ "Cannot initialize network ports\n");
+ }
+
+ /* Initialise all linked lists. */
+ if (init_data_ll() == -1)
+ rte_exit(EXIT_FAILURE, "Failed to initialize linked list\n");
+
+ /* Initialize device stats */
+ memset(&dev_statistics, 0, sizeof(dev_statistics));
+
+ /* Enable stats if the user option is set. */
+ if (enable_stats)
+ pthread_create(&tid, NULL, (void*)print_stats, NULL );
+
+ /* Launch all data cores. */
+ if (zero_copy == 0) {
+ RTE_LCORE_FOREACH_SLAVE(lcore_id) {
+ rte_eal_remote_launch(switch_worker,
+ mbuf_pool, lcore_id);
+ }
+ } else {
+ uint32_t count_in_mempool, index, i;
+ for (index = 0; index < 2*MAX_QUEUES; index++) {
+ /* For all RX and TX queues. */
+ count_in_mempool
+ = rte_mempool_count(vpool_array[index].pool);
+
+ /*
+ * Transfer all un-attached mbufs from vpool.pool
+ * to vpoo.ring.
+ */
+ for (i = 0; i < count_in_mempool; i++) {
+ struct rte_mbuf *mbuf
+ = __rte_mbuf_raw_alloc(
+ vpool_array[index].pool);
+ rte_ring_sp_enqueue(vpool_array[index].ring,
+ (void *)mbuf);
+ }
+
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in mempool at initial "
+ "is: %d\n", count_in_mempool);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in MAIN: mbuf count in ring at initial is :"
+ " %d\n",
+ rte_ring_count(vpool_array[index].ring));
+ }
+
+ RTE_LCORE_FOREACH_SLAVE(lcore_id)
+ rte_eal_remote_launch(switch_worker_zcp, NULL,
+ lcore_id);
+ }
+
+ /* Register CUSE device to handle IOCTLs. */
+ ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
+ if (ret != 0)
+ rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
+
+ init_virtio_net(&virtio_net_device_ops);
+
+ /* Start CUSE session. */
+ start_cuse_session_loop();
+ return 0;
+
+}
+
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
new file mode 100644
index 0000000..c15d938
--- /dev/null
+++ b/examples/vhost/main.h
@@ -0,0 +1,86 @@
+/*-
+ * BSD LICENSE
+ *
+ * Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Intel Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#ifndef _MAIN_H_
+#define _MAIN_H_
+
+#ifdef RTE_EXEC_ENV_BAREMETAL
+#define MAIN _main
+#else
+#define MAIN main
+#endif
+
+//#define DEBUG
+
+#ifdef DEBUG
+#define LOG_LEVEL RTE_LOG_DEBUG
+#define LOG_DEBUG(log_type, fmt, args...) do { \
+ RTE_LOG(DEBUG, log_type, fmt, ##args); \
+} while (0)
+#else
+#define LOG_LEVEL RTE_LOG_INFO
+#define LOG_DEBUG(log_type, fmt, args...) do{} while(0)
+#endif
+
+/* Macros for printing using RTE_LOG */
+#define RTE_LOGTYPE_VHOST_CONFIG RTE_LOGTYPE_USER1
+#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
+#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
+
+/*
+ * Device linked list structure for data path.
+ */
+struct virtio_net_data_ll
+{
+ struct virtio_net *dev; /* Pointer to device created by configuration core. */
+ struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
+};
+
+/*
+ * Structure containing data core specific information.
+ */
+struct lcore_ll_info
+{
+ struct virtio_net_data_ll *ll_root_free; /* Pointer to head in free linked list. */
+ struct virtio_net_data_ll *ll_root_used; /* Pointer to head of used linked list. */
+ uint32_t device_num; /* Number of devices on lcore. */
+ volatile uint8_t dev_removal_flag; /* Flag to synchronize device removal. */
+};
+
+struct lcore_info
+{
+ struct lcore_ll_info *lcore_ll; /* Pointer to data core specific lcore_ll_info struct */
+};
+
+int MAIN(int argc, char **argv);
+#endif /* _MAIN_H_ */
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 02/14] remove virtio_dev_rx, virtio_dev_merge_rx, copy_from_mbuf_to_ring, virtio_dev_tx, virtio_dev_merge_tx
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 01/14] copy old " Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 03/14] add bak two hpa region functions Huawei Xie
` (13 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
Those functions are integrated into the user space vhost library.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 806 --------------------------------------------------
1 file changed, 806 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index c23d453..11d5d17 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -927,497 +927,6 @@ gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
}
/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works when mergeable is disabled.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_rx(struct virtio_net *dev, struct rte_mbuf **pkts, uint32_t count)
-{
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- struct rte_mbuf *buff;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {{0,0,0,0,0,0},0};
- uint64_t buff_addr = 0;
- uint64_t buff_hdr_addr = 0;
- uint32_t head[MAX_PKT_BURST], packet_len = 0;
- uint32_t head_idx, packet_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint16_t free_entries;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_rx()\n", dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = (count > MAX_PKT_BURST) ? MAX_PKT_BURST : count;
-
- /* As many data cores may want access to available buffers, they need to be reserved. */
- do {
- res_base_idx = vq->last_used_idx_res;
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- free_entries = (avail_idx - res_base_idx);
- /* If retry is enabled and the queue is full then we wait and retry to avoid packet loss. */
- if (enable_retry && unlikely(count > free_entries)) {
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- free_entries = (avail_idx - res_base_idx);
- if (count <= free_entries)
- break;
- }
- }
-
- /*check that we have enough buffers*/
- if (unlikely(count > free_entries))
- count = free_entries;
-
- if (count == 0)
- return 0;
-
- res_end_idx = res_base_idx + count;
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res, res_base_idx,
- res_end_idx);
- } while (unlikely(success == 0));
- res_cur_idx = res_base_idx;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| End Index %d\n", dev->device_fh, res_cur_idx, res_end_idx);
-
- /* Prefetch available ring to retrieve indexes. */
- rte_prefetch0(&vq->avail->ring[res_cur_idx & (vq->size - 1)]);
-
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (head_idx = 0; head_idx < count; head_idx++)
- head[head_idx] = vq->avail->ring[(res_cur_idx + head_idx) & (vq->size - 1)];
-
- /*Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
-
- while (res_cur_idx != res_end_idx) {
- /* Get descriptor from available ring */
- desc = &vq->desc[head[packet_success]];
-
- buff = pkts[packet_success];
-
- /* Convert from gpa to vva (guest physical addr -> vhost virtual addr) */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- /* Copy virtio_hdr to packet and increment buffer address */
- buff_hdr_addr = buff_addr;
- packet_len = rte_pktmbuf_data_len(buff) + vq->vhost_hlen;
-
- /*
- * If the descriptors are chained the header and data are
- * placed in separate buffers.
- */
- if (desc->flags & VRING_DESC_F_NEXT) {
- desc->len = vq->vhost_hlen;
- desc = &vq->desc[desc->next];
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- desc->len = rte_pktmbuf_data_len(buff);
- } else {
- buff_addr += vq->vhost_hlen;
- desc->len = packet_len;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[res_cur_idx & (vq->size - 1)].id = head[packet_success];
- vq->used->ring[res_cur_idx & (vq->size - 1)].len = packet_len;
-
- /* Copy mbuf data to buffer */
- rte_memcpy((void *)(uintptr_t)buff_addr,
- rte_pktmbuf_mtod(buff, const void *),
- rte_pktmbuf_data_len(buff));
- PRINT_PACKET(dev, (uintptr_t)buff_addr,
- rte_pktmbuf_data_len(buff), 0);
-
- res_cur_idx++;
- packet_success++;
-
- rte_memcpy((void *)(uintptr_t)buff_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)buff_hdr_addr, vq->vhost_hlen, 1);
-
- if (res_cur_idx < res_end_idx) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- }
- }
-
- rte_compiler_barrier();
-
- /* Wait until it's our turn to add our buffer to the used ring. */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += count;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- return count;
-}
-
-static inline uint32_t __attribute__((always_inline))
-copy_from_mbuf_to_vring(struct virtio_net *dev,
- uint16_t res_base_idx, uint16_t res_end_idx,
- struct rte_mbuf *pkt)
-{
- uint32_t vec_idx = 0;
- uint32_t entry_success = 0;
- struct vhost_virtqueue *vq;
- /* The virtio_hdr is initialised to 0. */
- struct virtio_net_hdr_mrg_rxbuf virtio_hdr = {
- {0, 0, 0, 0, 0, 0}, 0};
- uint16_t cur_idx = res_base_idx;
- uint64_t vb_addr = 0;
- uint64_t vb_hdr_addr = 0;
- uint32_t seg_offset = 0;
- uint32_t vb_offset = 0;
- uint32_t seg_avail;
- uint32_t vb_avail;
- uint32_t cpy_len, entry_len;
-
- if (pkt == NULL)
- return 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Current Index %d| "
- "End Index %d\n",
- dev->device_fh, cur_idx, res_end_idx);
-
- /*
- * Convert from gpa to vva
- * (guest physical addr -> vhost virtual addr)
- */
- vq = dev->virtqueue[VIRTIO_RXQ];
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
- vb_hdr_addr = vb_addr;
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- virtio_hdr.num_buffers = res_end_idx - res_base_idx;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") RX: Num merge buffers %d\n",
- dev->device_fh, virtio_hdr.num_buffers);
-
- rte_memcpy((void *)(uintptr_t)vb_hdr_addr,
- (const void *)&virtio_hdr, vq->vhost_hlen);
-
- PRINT_PACKET(dev, (uintptr_t)vb_hdr_addr, vq->vhost_hlen, 1);
-
- seg_avail = rte_pktmbuf_data_len(pkt);
- vb_offset = vq->vhost_hlen;
- vb_avail =
- vq->buf_vec[vec_idx].buf_len - vq->vhost_hlen;
-
- entry_len = vq->vhost_hlen;
-
- if (vb_avail == 0) {
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vq->vhost_hlen;
-
- if ((vq->desc[desc_idx].flags
- & VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
-
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr =
- gpa_to_vva(dev, vq->buf_vec[vec_idx].buf_addr);
-
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- while (cpy_len > 0) {
- /* Copy mbuf data to vring buffer */
- rte_memcpy((void *)(uintptr_t)(vb_addr + vb_offset),
- (const void *)(rte_pktmbuf_mtod(pkt, char*) + seg_offset),
- cpy_len);
-
- PRINT_PACKET(dev,
- (uintptr_t)(vb_addr + vb_offset),
- cpy_len, 0);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- seg_avail -= cpy_len;
- vb_avail -= cpy_len;
- entry_len += cpy_len;
-
- if (seg_avail != 0) {
- /*
- * The virtio buffer in this vring
- * entry reach to its end.
- * But the segment doesn't complete.
- */
- if ((vq->desc[vq->buf_vec[vec_idx].desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- }
-
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_offset = 0;
- vb_avail = vq->buf_vec[vec_idx].buf_len;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This current segment complete, need continue to
- * check if the whole packet complete or not.
- */
- pkt = pkt->next;
- if (pkt != NULL) {
- /*
- * There are more segments.
- */
- if (vb_avail == 0) {
- /*
- * This current buffer from vring is
- * used up, need fetch next buffer
- * from buf_vec.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- if ((vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) == 0) {
- uint16_t wrapped_idx =
- cur_idx & (vq->size - 1);
- /*
- * Update used ring with the
- * descriptor information
- */
- vq->used->ring[wrapped_idx].id
- = desc_idx;
- vq->used->ring[wrapped_idx].len
- = entry_len;
- entry_success++;
- entry_len = 0;
- cur_idx++;
- }
-
- /* Get next buffer from buf_vec. */
- vec_idx++;
- vb_addr = gpa_to_vva(dev,
- vq->buf_vec[vec_idx].buf_addr);
- vb_avail =
- vq->buf_vec[vec_idx].buf_len;
- vb_offset = 0;
- }
-
- seg_offset = 0;
- seg_avail = rte_pktmbuf_data_len(pkt);
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- } else {
- /*
- * This whole packet completes.
- */
- uint32_t desc_idx =
- vq->buf_vec[vec_idx].desc_idx;
- vq->desc[desc_idx].len = vb_offset;
-
- while (vq->desc[desc_idx].flags &
- VRING_DESC_F_NEXT) {
- desc_idx = vq->desc[desc_idx].next;
- vq->desc[desc_idx].len = 0;
- }
-
- /* Update used ring with desc information */
- vq->used->ring[cur_idx & (vq->size - 1)].id
- = vq->buf_vec[vec_idx].desc_idx;
- vq->used->ring[cur_idx & (vq->size - 1)].len
- = entry_len;
- entry_len = 0;
- cur_idx++;
- entry_success++;
- seg_avail = 0;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
- }
- }
-
- return entry_success;
-}
-
-/*
- * This function adds buffers to the virtio devices RX virtqueue. Buffers can
- * be received from the physical port or from another virtio device. A packet
- * count is returned to indicate the number of packets that were succesfully
- * added to the RX queue. This function works for mergeable RX.
- */
-static inline uint32_t __attribute__((always_inline))
-virtio_dev_merge_rx(struct virtio_net *dev, struct rte_mbuf **pkts,
- uint32_t count)
-{
- struct vhost_virtqueue *vq;
- uint32_t pkt_idx = 0, entry_success = 0;
- uint32_t retry = 0;
- uint16_t avail_idx, res_cur_idx;
- uint16_t res_base_idx, res_end_idx;
- uint8_t success = 0;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_rx()\n",
- dev->device_fh);
- vq = dev->virtqueue[VIRTIO_RXQ];
- count = RTE_MIN((uint32_t)MAX_PKT_BURST, count);
-
- if (count == 0)
- return 0;
-
- for (pkt_idx = 0; pkt_idx < count; pkt_idx++) {
- uint32_t secure_len = 0;
- uint16_t need_cnt;
- uint32_t vec_idx = 0;
- uint32_t pkt_len = pkts[pkt_idx]->pkt_len + vq->vhost_hlen;
- uint16_t i, id;
-
- do {
- /*
- * As many data cores may want access to available
- * buffers, they need to be reserved.
- */
- res_base_idx = vq->last_used_idx_res;
- res_cur_idx = res_base_idx;
-
- do {
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
- if (unlikely(res_cur_idx == avail_idx)) {
- /*
- * If retry is enabled and the queue is
- * full then we wait and retry to avoid
- * packet loss.
- */
- if (enable_retry) {
- uint8_t cont = 0;
- for (retry = 0; retry < burst_rx_retry_num; retry++) {
- rte_delay_us(burst_rx_delay_time);
- avail_idx =
- *((volatile uint16_t *)&vq->avail->idx);
- if (likely(res_cur_idx != avail_idx)) {
- cont = 1;
- break;
- }
- }
- if (cont == 1)
- continue;
- }
-
- LOG_DEBUG(VHOST_DATA,
- "(%"PRIu64") Failed "
- "to get enough desc from "
- "vring\n",
- dev->device_fh);
- return pkt_idx;
- } else {
- uint16_t wrapped_idx =
- (res_cur_idx) & (vq->size - 1);
- uint32_t idx =
- vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
-
- do {
- next_desc = 0;
- secure_len += vq->desc[idx].len;
- if (vq->desc[idx].flags &
- VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
-
- res_cur_idx++;
- }
- } while (pkt_len > secure_len);
-
- /* vq->last_used_idx_res is atomically updated. */
- success = rte_atomic16_cmpset(&vq->last_used_idx_res,
- res_base_idx,
- res_cur_idx);
- } while (success == 0);
-
- id = res_base_idx;
- need_cnt = res_cur_idx - res_base_idx;
-
- for (i = 0; i < need_cnt; i++, id++) {
- uint16_t wrapped_idx = id & (vq->size - 1);
- uint32_t idx = vq->avail->ring[wrapped_idx];
- uint8_t next_desc;
- do {
- next_desc = 0;
- vq->buf_vec[vec_idx].buf_addr =
- vq->desc[idx].addr;
- vq->buf_vec[vec_idx].buf_len =
- vq->desc[idx].len;
- vq->buf_vec[vec_idx].desc_idx = idx;
- vec_idx++;
-
- if (vq->desc[idx].flags & VRING_DESC_F_NEXT) {
- idx = vq->desc[idx].next;
- next_desc = 1;
- }
- } while (next_desc);
- }
-
- res_end_idx = res_cur_idx;
-
- entry_success = copy_from_mbuf_to_vring(dev, res_base_idx,
- res_end_idx, pkts[pkt_idx]);
-
- rte_compiler_barrier();
-
- /*
- * Wait until it's our turn to add our buffer
- * to the used ring.
- */
- while (unlikely(vq->last_used_idx != res_base_idx))
- rte_pause();
-
- *(volatile uint16_t *)&vq->used->idx += entry_success;
- vq->last_used_idx = res_end_idx;
-
- /* Kick the guest if necessary. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
- }
-
- return count;
-}
-
-/*
* Compares a packet destination MAC address to a device MAC address.
*/
static inline int __attribute__((always_inline))
@@ -1713,321 +1222,6 @@ virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *
tx_q->len = len;
return;
}
-
-static inline void __attribute__((always_inline))
-virtio_dev_tx(struct virtio_net* dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf m;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t buff_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, packet_success = 0;
- uint16_t avail_idx;
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_tx()\n", dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- if (free_entries > MAX_PKT_BURST)
- free_entries = MAX_PKT_BURST;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n", dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (packet_success < free_entries) {
- desc = &vq->desc[head[packet_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- buff_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void*)(uintptr_t)buff_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (packet_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[packet_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[packet_success];
- vq->used->ring[used_idx].len = 0;
-
- /* Setup dummy mbuf. This is copied to a real mbuf if transmitted out the physical port. */
- m.data_len = desc->len;
- m.pkt_len = desc->len;
- m.data_off = 0;
-
- PRINT_PACKET(dev, (uintptr_t)buff_addr, desc->len, 0);
-
- /* If this is the first received packet we need to learn the MAC and setup VMDQ */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
- /*discard frame if device is scheduled for removal or a duplicate MAC address is found. */
- packet_success += free_entries;
- vq->last_used_idx += packet_success;
- break;
- }
- }
- virtio_tx_route(dev, &m, mbuf_pool, (uint16_t)dev->device_fh);
-
- vq->last_used_idx++;
- packet_success++;
- }
-
- rte_compiler_barrier();
- vq->used->idx += packet_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-}
-
-/* This function works for TX packets with mergeable feature enabled. */
-static inline void __attribute__((always_inline))
-virtio_dev_merge_tx(struct virtio_net *dev, struct rte_mempool *mbuf_pool)
-{
- struct rte_mbuf *m, *prev;
- struct vhost_virtqueue *vq;
- struct vring_desc *desc;
- uint64_t vb_addr = 0;
- uint32_t head[MAX_PKT_BURST];
- uint32_t used_idx;
- uint32_t i;
- uint16_t free_entries, entry_success = 0;
- uint16_t avail_idx;
- uint32_t buf_size = MBUF_SIZE - (sizeof(struct rte_mbuf)
- + RTE_PKTMBUF_HEADROOM);
-
- vq = dev->virtqueue[VIRTIO_TXQ];
- avail_idx = *((volatile uint16_t *)&vq->avail->idx);
-
- /* If there are no available buffers then return. */
- if (vq->last_used_idx == avail_idx)
- return;
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") virtio_dev_merge_tx()\n",
- dev->device_fh);
-
- /* Prefetch available ring to retrieve head indexes. */
- rte_prefetch0(&vq->avail->ring[vq->last_used_idx & (vq->size - 1)]);
-
- /*get the number of free entries in the ring*/
- free_entries = (avail_idx - vq->last_used_idx);
-
- /* Limit to MAX_PKT_BURST. */
- free_entries = RTE_MIN(free_entries, MAX_PKT_BURST);
-
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Buffers available %d\n",
- dev->device_fh, free_entries);
- /* Retrieve all of the head indexes first to avoid caching issues. */
- for (i = 0; i < free_entries; i++)
- head[i] = vq->avail->ring[(vq->last_used_idx + i) & (vq->size - 1)];
-
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success]]);
- rte_prefetch0(&vq->used->ring[vq->last_used_idx & (vq->size - 1)]);
-
- while (entry_success < free_entries) {
- uint32_t vb_avail, vb_offset;
- uint32_t seg_avail, seg_offset;
- uint32_t cpy_len;
- uint32_t seg_num = 0;
- struct rte_mbuf *cur;
- uint8_t alloc_err = 0;
-
- desc = &vq->desc[head[entry_success]];
-
- /* Discard first buffer as it is the virtio header */
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
-
- used_idx = vq->last_used_idx & (vq->size - 1);
-
- if (entry_success < (free_entries - 1)) {
- /* Prefetch descriptor index. */
- rte_prefetch0(&vq->desc[head[entry_success+1]]);
- rte_prefetch0(&vq->used->ring[(used_idx + 1) & (vq->size - 1)]);
- }
-
- /* Update used index buffer information. */
- vq->used->ring[used_idx].id = head[entry_success];
- vq->used->ring[used_idx].len = 0;
-
- vb_offset = 0;
- vb_avail = desc->len;
- seg_offset = 0;
- seg_avail = buf_size;
- cpy_len = RTE_MIN(vb_avail, seg_avail);
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr, desc->len, 0);
-
- /* Allocate an mbuf and populate the structure. */
- m = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(m == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- seg_num++;
- cur = m;
- prev = m;
- while (cpy_len != 0) {
- rte_memcpy((void *)(rte_pktmbuf_mtod(cur, char *) + seg_offset),
- (void *)((uintptr_t)(vb_addr + vb_offset)),
- cpy_len);
-
- seg_offset += cpy_len;
- vb_offset += cpy_len;
- vb_avail -= cpy_len;
- seg_avail -= cpy_len;
-
- if (vb_avail != 0) {
- /*
- * The segment reachs to its end,
- * while the virtio buffer in TX vring has
- * more data to be copied.
- */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- /* Allocate mbuf and populate the structure. */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR, VHOST_DATA, "Failed to "
- "allocate memory for mbuf.\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
-
- seg_num++;
- prev->next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- } else {
- if (desc->flags & VRING_DESC_F_NEXT) {
- /*
- * There are more virtio buffers in
- * same vring entry need to be copied.
- */
- if (seg_avail == 0) {
- /*
- * The current segment hasn't
- * room to accomodate more
- * data.
- */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- /*
- * Allocate an mbuf and
- * populate the structure.
- */
- cur = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(cur == NULL)) {
- RTE_LOG(ERR,
- VHOST_DATA,
- "Failed to "
- "allocate memory "
- "for mbuf\n");
- rte_pktmbuf_free(m);
- alloc_err = 1;
- break;
- }
- seg_num++;
- prev->next = cur;
- prev = cur;
- seg_offset = 0;
- seg_avail = buf_size;
- }
-
- desc = &vq->desc[desc->next];
-
- /* Buffer address translation. */
- vb_addr = gpa_to_vva(dev, desc->addr);
- /* Prefetch buffer address. */
- rte_prefetch0((void *)(uintptr_t)vb_addr);
- vb_offset = 0;
- vb_avail = desc->len;
-
- PRINT_PACKET(dev, (uintptr_t)vb_addr,
- desc->len, 0);
- } else {
- /* The whole packet completes. */
- cur->data_len = seg_offset;
- m->pkt_len += seg_offset;
- vb_avail = 0;
- }
- }
-
- cpy_len = RTE_MIN(vb_avail, seg_avail);
- }
-
- if (unlikely(alloc_err == 1))
- break;
-
- m->nb_segs = seg_num;
-
- /*
- * If this is the first received packet we need to learn
- * the MAC and setup VMDQ
- */
- if (dev->ready == DEVICE_MAC_LEARNING) {
- if (dev->remove || (link_vmdq(dev, m) == -1)) {
- /*
- * Discard frame if device is scheduled for
- * removal or a duplicate MAC address is found.
- */
- entry_success = free_entries;
- vq->last_used_idx += entry_success;
- rte_pktmbuf_free(m);
- break;
- }
- }
-
- virtio_tx_route(dev, m, mbuf_pool, (uint16_t)dev->device_fh);
- vq->last_used_idx++;
- entry_success++;
- rte_pktmbuf_free(m);
- }
-
- rte_compiler_barrier();
- vq->used->idx += entry_success;
- /* Kick guest if required. */
- if (!(vq->avail->flags & VRING_AVAIL_F_NO_INTERRUPT))
- eventfd_write((int)vq->kickfd, 1);
-
-}
-
/*
* This function is called by each data core. It handles all RX/TX registered with the
* core. For TX the specific lcore linked list is used. For RX, MAC addresses are compared
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 03/14] add bak two hpa region functions
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 01/14] copy old " Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 02/14] remove virtio_dev_rx, virtio_dev_merge_rx, copy_from_mbuf_to_ring, virtio_dev_tx, virtio_dev_merge_tx Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 04/14] dev->vdev Huawei Xie
` (12 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
check_hpa_regions, fill_hpa_memory_regions and hpa memory region data structure are added back.
zero copy logic will be implemented in vhost example.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 147 ++++++++++++++++++++++++++++++++++++++++++++++++++
examples/vhost/main.h | 15 ++++++
2 files changed, 162 insertions(+)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 11d5d17..169a5f3 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -2481,6 +2481,153 @@ destroy_device (volatile struct virtio_net *dev)
}
/*
+ * Calculate the region count of physical continous regions for one particular
+ * region of whose vhost virtual address is continous. The particular region
+ * start from vva_start, with size of 'size' in argument.
+ */
+static uint32_t
+check_hpa_regions(uint64_t vva_start, uint64_t size)
+{
+ uint32_t i, nregions = 0, page_size = getpagesize();
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0;
+ if (vva_start % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: vva start(%p) mod page_size(%d) "
+ "has remainder\n",
+ (void *)(uintptr_t)vva_start, page_size);
+ return 0;
+ }
+ if (size % page_size) {
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_countinous: "
+ "size((%"PRIu64")) mod page_size(%d) has remainder\n",
+ size, page_size);
+ return 0;
+ }
+ for (i = 0; i < size - page_size; i = i + page_size) {
+ cur_phys_addr
+ = rte_mem_virt2phy((void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ ++nregions;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hva addr:(%p) is not "
+ "continuous with hva addr:(%p), diff:%d\n",
+ (void *)(uintptr_t)(vva_start + (uint64_t)i),
+ (void *)(uintptr_t)(vva_start + (uint64_t)i
+ + page_size), page_size);
+ LOG_DEBUG(VHOST_CONFIG,
+ "in check_continuous: hpa addr:(%p) is not "
+ "continuous with hpa addr:(%p), "
+ "diff:(%"PRIu64")\n",
+ (void *)(uintptr_t)cur_phys_addr,
+ (void *)(uintptr_t)next_phys_addr,
+ (next_phys_addr-cur_phys_addr));
+ }
+ }
+ return nregions;
+}
+
+/*
+ * Divide each region whose vhost virtual address is continous into a few
+ * sub-regions, make sure the physical address within each sub-region are
+ * continous. And fill offset(to GPA) and size etc. information of each
+ * sub-region into regions_hpa.
+ */
+static uint32_t
+fill_hpa_memory_regions(struct virtio_memory_regions_hpa *mem_region_hpa, struct virtio_memory *virtio_memory)
+{
+ uint32_t regionidx, regionidx_hpa = 0, i, k, page_size = getpagesize();
+ uint64_t cur_phys_addr = 0, next_phys_addr = 0, vva_start;
+
+ if (mem_region_hpa == NULL)
+ return 0;
+
+ for (regionidx = 0; regionidx < virtio_memory->nregions; regionidx++) {
+ vva_start = virtio_memory->regions[regionidx].guest_phys_address +
+ virtio_memory->regions[regionidx].address_offset;
+ mem_region_hpa[regionidx_hpa].guest_phys_address
+ = virtio_memory->regions[regionidx].guest_phys_address;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ rte_mem_virt2phy((void *)(uintptr_t)(vva_start)) -
+ mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ for (i = 0, k = 0;
+ i < virtio_memory->regions[regionidx].memory_size -
+ page_size;
+ i += page_size) {
+ cur_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start + i));
+ next_phys_addr = rte_mem_virt2phy(
+ (void *)(uintptr_t)(vva_start +
+ i + page_size));
+ if ((cur_phys_addr + page_size) != next_phys_addr) {
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end =
+ mem_region_hpa[regionidx_hpa].guest_phys_address +
+ k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size
+ = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest "
+ "phys addr end [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: guest phys addr "
+ "size [%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ mem_region_hpa[regionidx_hpa + 1].guest_phys_address
+ = mem_region_hpa[regionidx_hpa].guest_phys_address_end;
+ ++regionidx_hpa;
+ mem_region_hpa[regionidx_hpa].host_phys_addr_offset =
+ next_phys_addr -
+ mem_region_hpa[regionidx_hpa].guest_phys_address;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest"
+ " phys addr start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address));
+ LOG_DEBUG(VHOST_CONFIG,
+ "in fill_hpa_regions: host phys addr "
+ "start[%d]:(%p)\n",
+ regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].host_phys_addr_offset));
+ k = 0;
+ } else {
+ k += page_size;
+ }
+ }
+ mem_region_hpa[regionidx_hpa].guest_phys_address_end
+ = mem_region_hpa[regionidx_hpa].guest_phys_address
+ + k + page_size;
+ mem_region_hpa[regionidx_hpa].memory_size = k + page_size;
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr end "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].guest_phys_address_end));
+ LOG_DEBUG(VHOST_CONFIG, "in fill_hpa_regions: guest phys addr size "
+ "[%d]:(%p)\n", regionidx_hpa,
+ (void *)(uintptr_t)
+ (mem_region_hpa[regionidx_hpa].memory_size));
+ ++regionidx_hpa;
+ }
+ return regionidx_hpa;
+}
+
+/*
* A new device is added to a data core. First the device is added to the main linked list
* and the allocated to a specific data core.
*/
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
index c15d938..ebb0b5b 100644
--- a/examples/vhost/main.h
+++ b/examples/vhost/main.h
@@ -57,6 +57,21 @@
#define RTE_LOGTYPE_VHOST_DATA RTE_LOGTYPE_USER2
#define RTE_LOGTYPE_VHOST_PORT RTE_LOGTYPE_USER3
+/**
+ * Information relating to memory regions including offsets to
+ * addresses in host physical space.
+ */
+struct virtio_memory_regions_hpa {
+ /**< Base guest physical address of region. */
+ uint64_t guest_phys_address;
+ /**< End guest physical address of region. */
+ uint64_t guest_phys_address_end;
+ /**< Size of region. */
+ uint64_t memory_size;
+ /**< Offset of region for gpa to hpa translation. */
+ uint64_t host_phys_addr_offset;
+};
+
/*
* Device linked list structure for data path.
*/
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 04/14] dev->vdev
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (2 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 03/14] add bak two hpa region functions Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 05/14] hpa region Huawei Xie
` (11 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
define vhost_dev data structure.
change reference to virtio_dev to vhost_dev.
vhost example use vdev data structure for switching related logic and
container for virtio_dev.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 269 ++++++++++++++++++++++++++++----------------------
examples/vhost/main.h | 25 ++++-
2 files changed, 173 insertions(+), 121 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 169a5f3..03a0f48 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -896,7 +896,7 @@ gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
* This is used to convert virtio buffer addresses.
*/
static inline uint64_t __attribute__((always_inline))
-gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
+gpa_to_hpa(struct vhost_dev *vdev, uint64_t guest_pa,
uint32_t buf_len, hpa_type *addr_type)
{
struct virtio_memory_regions_hpa *region;
@@ -905,8 +905,8 @@ gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
*addr_type = PHYS_ADDR_INVALID;
- for (regionidx = 0; regionidx < dev->mem->nregions_hpa; regionidx++) {
- region = &dev->mem->regions_hpa[regionidx];
+ for (regionidx = 0; regionidx < vdev->nregions_hpa; regionidx++) {
+ region = &vdev->regions_hpa[regionidx];
if ((guest_pa >= region->guest_phys_address) &&
(guest_pa <= region->guest_phys_address_end)) {
vhost_pa = region->host_phys_addr_offset + guest_pa;
@@ -920,7 +920,7 @@ gpa_to_hpa(struct virtio_net *dev, uint64_t guest_pa,
}
LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| HPA %p\n",
- dev->device_fh, (void *)(uintptr_t)guest_pa,
+ vdev->dev->device_fh, (void *)(uintptr_t)guest_pa,
(void *)(uintptr_t)vhost_pa);
return vhost_pa;
@@ -940,10 +940,11 @@ ether_addr_cmp(struct ether_addr *ea, struct ether_addr *eb)
* vlan tag to a VMDQ.
*/
static int
-link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
+link_vmdq(struct vhost_dev *vdev, struct rte_mbuf *m)
{
struct ether_hdr *pkt_hdr;
struct virtio_net_data_ll *dev_ll;
+ struct virtio_net *dev = vdev->dev;
int i, ret;
/* Learn MAC address of guest device from packet */
@@ -952,7 +953,7 @@ link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
dev_ll = ll_root_used;
while (dev_ll != NULL) {
- if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->dev->mac_address)) {
+ if (ether_addr_cmp(&(pkt_hdr->s_addr), &dev_ll->vdev->mac_address)) {
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") WARNING: This device is using an existing MAC address and has not been registered.\n", dev->device_fh);
return -1;
}
@@ -960,30 +961,30 @@ link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
}
for (i = 0; i < ETHER_ADDR_LEN; i++)
- dev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
+ vdev->mac_address.addr_bytes[i] = pkt_hdr->s_addr.addr_bytes[i];
/* vlan_tag currently uses the device_id. */
- dev->vlan_tag = vlan_tags[dev->device_fh];
+ vdev->vlan_tag = vlan_tags[dev->device_fh];
/* Print out VMDQ registration info. */
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") MAC_ADDRESS %02x:%02x:%02x:%02x:%02x:%02x and VLAN_TAG %d registered\n",
dev->device_fh,
- dev->mac_address.addr_bytes[0], dev->mac_address.addr_bytes[1],
- dev->mac_address.addr_bytes[2], dev->mac_address.addr_bytes[3],
- dev->mac_address.addr_bytes[4], dev->mac_address.addr_bytes[5],
- dev->vlan_tag);
+ vdev->mac_address.addr_bytes[0], vdev->mac_address.addr_bytes[1],
+ vdev->mac_address.addr_bytes[2], vdev->mac_address.addr_bytes[3],
+ vdev->mac_address.addr_bytes[4], vdev->mac_address.addr_bytes[5],
+ vdev->vlan_tag);
/* Register the MAC address. */
- ret = rte_eth_dev_mac_addr_add(ports[0], &dev->mac_address, (uint32_t)dev->device_fh);
+ ret = rte_eth_dev_mac_addr_add(ports[0], &vdev->mac_address, (uint32_t)dev->device_fh);
if (ret)
RTE_LOG(ERR, VHOST_DATA, "(%"PRIu64") Failed to add device MAC address to VMDQ\n",
dev->device_fh);
/* Enable stripping of the vlan tag as we handle routing. */
- rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)dev->vmdq_rx_q, 1);
+ rte_eth_dev_set_vlan_strip_on_queue(ports[0], (uint16_t)vdev->vmdq_rx_q, 1);
/* Set device as ready for RX. */
- dev->ready = DEVICE_RX;
+ vdev->ready = DEVICE_RX;
return 0;
}
@@ -993,33 +994,33 @@ link_vmdq(struct virtio_net *dev, struct rte_mbuf *m)
* queue before disabling RX on the device.
*/
static inline void
-unlink_vmdq(struct virtio_net *dev)
+unlink_vmdq(struct vhost_dev *vdev)
{
unsigned i = 0;
unsigned rx_count;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
- if (dev->ready == DEVICE_RX) {
+ if (vdev->ready == DEVICE_RX) {
/*clear MAC and VLAN settings*/
- rte_eth_dev_mac_addr_remove(ports[0], &dev->mac_address);
+ rte_eth_dev_mac_addr_remove(ports[0], &vdev->mac_address);
for (i = 0; i < 6; i++)
- dev->mac_address.addr_bytes[i] = 0;
+ vdev->mac_address.addr_bytes[i] = 0;
- dev->vlan_tag = 0;
+ vdev->vlan_tag = 0;
/*Clear out the receive buffers*/
rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ (uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
while (rx_count) {
for (i = 0; i < rx_count; i++)
rte_pktmbuf_free(pkts_burst[i]);
rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ (uint16_t)vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
}
- dev->ready = DEVICE_MAC_LEARNING;
+ vdev->ready = DEVICE_MAC_LEARNING;
}
}
@@ -1028,11 +1029,13 @@ unlink_vmdq(struct virtio_net *dev)
* the packet on that devices RX queue. If not then return.
*/
static inline unsigned __attribute__((always_inline))
-virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
+virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
{
struct virtio_net_data_ll *dev_ll;
struct ether_hdr *pkt_hdr;
uint64_t ret = 0;
+ struct virtio_net *dev = vdev->dev;
+ struct virtio_net *tdev; /* destination virito device */
pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
@@ -1040,22 +1043,23 @@ virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
dev_ll = ll_root_used;
while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
+ if ((dev_ll->vdev->ready == DEVICE_RX) && ether_addr_cmp(&(pkt_hdr->d_addr),
+ &dev_ll->vdev->mac_address)) {
/* Drop the packet if the TX packet is destined for the TX device. */
- if (dev_ll->dev->device_fh == dev->device_fh) {
+ if (dev_ll->vdev->dev->device_fh == dev->device_fh) {
LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: Source and destination MAC addresses are the same. Dropping packet.\n",
- dev_ll->dev->device_fh);
+ dev->device_fh);
return 0;
}
+ tdev = dev_ll->vdev->dev;
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", dev_ll->dev->device_fh);
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", tdev->device_fh);
- if (dev_ll->dev->remove) {
+ if (dev_ll->vdev->remove) {
/*drop the packet if the device is marked for removal*/
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", dev_ll->dev->device_fh);
+ LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh);
} else {
uint32_t mergeable =
dev_ll->dev->features &
@@ -1070,13 +1074,13 @@ virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
if (enable_stats) {
rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ &dev_statistics[tdev->device_fh].rx_total_atomic,
1);
rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic,
+ &dev_statistics[tdev->device_fh].rx_atomic,
ret);
- dev_statistics[dev->device_fh].tx_total++;
- dev_statistics[dev->device_fh].tx += ret;
+ dev_statistics[tdev->device_fh].tx_total++;
+ dev_statistics[tdev->device_fh].tx += ret;
}
}
@@ -1093,7 +1097,7 @@ virtio_tx_local(struct virtio_net *dev, struct rte_mbuf *m)
* or the physical port.
*/
static inline void __attribute__((always_inline))
-virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
+virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
{
struct mbuf_table *tx_q;
struct vlan_ethhdr *vlan_hdr;
@@ -1103,37 +1107,38 @@ virtio_tx_route(struct virtio_net* dev, struct rte_mbuf *m, struct rte_mempool *
const uint16_t lcore_id = rte_lcore_id();
struct virtio_net_data_ll *dev_ll = ll_root_used;
struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
+ struct virtio_net *dev = vdev->dev;
/*check if destination is local VM*/
- if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(dev, m) == 0))
+ if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(vdev, m) == 0))
return;
if (vm2vm_mode == VM2VM_HARDWARE) {
while (dev_ll != NULL) {
- if ((dev_ll->dev->ready == DEVICE_RX)
+ if ((dev_ll->vdev->ready == DEVICE_RX)
&& ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
+ &dev_ll->vdev->mac_address)) {
/*
* Drop the packet if the TX packet is
* destined for the TX device.
*/
- if (dev_ll->dev->device_fh == dev->device_fh) {
+ if (dev_ll->vdev->dev->device_fh == dev->device_fh) {
LOG_DEBUG(VHOST_DATA,
"(%"PRIu64") TX: Source and destination"
" MAC addresses are the same. Dropping "
"packet.\n",
- dev_ll->dev->device_fh);
+ dev_ll->vdev->device_fh);
return;
}
offset = 4;
vlan_tag =
(uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+ vlan_tags[(uint16_t)dev_ll->vdev->dev->device_fh];
LOG_DEBUG(VHOST_DATA,
"(%"PRIu64") TX: pkt to local VM device id:"
"(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
+ dev->device_fh, dev_ll->vdev->dev->device_fh,
vlan_tag);
break;
@@ -1232,6 +1237,7 @@ switch_worker(__attribute__((unused)) void *arg)
{
struct rte_mempool *mbuf_pool = arg;
struct virtio_net *dev = NULL;
+ struct vhost_dev *vdev = NULL;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct virtio_net_data_ll *dev_ll;
struct mbuf_table *tx_q;
@@ -1299,20 +1305,21 @@ switch_worker(__attribute__((unused)) void *arg)
while (dev_ll != NULL) {
/*get virtio device ID*/
- dev = dev_ll->dev;
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
mergeable =
dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
- if (dev->remove) {
+ if (vdev->remove) {
dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
+ unlink_vmdq(vdev);
+ vdev->ready = DEVICE_SAFE_REMOVE;
continue;
}
- if (likely(dev->ready == DEVICE_RX)) {
+ if (likely(vdev->ready == DEVICE_RX)) {
/*Handle guest RX*/
rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
+ vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
if (rx_count) {
if (likely(mergeable == 0))
@@ -1326,10 +1333,10 @@ switch_worker(__attribute__((unused)) void *arg)
if (enable_stats) {
rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_total_atomic,
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
rx_count);
rte_atomic64_add(
- &dev_statistics[dev_ll->dev->device_fh].rx_atomic, ret_count);
+ &dev_statistics[dev_ll->vdev->dev->device_fh].rx_atomic, ret_count);
}
while (likely(rx_count)) {
rx_count--;
@@ -1339,7 +1346,7 @@ switch_worker(__attribute__((unused)) void *arg)
}
}
- if (!dev->remove) {
+ if (!vdev->remove) {
/*Handle guest TX*/
if (likely(mergeable == 0))
virtio_dev_tx(dev, mbuf_pool);
@@ -1461,12 +1468,13 @@ attach_rxmbuf_zcp(struct virtio_net *dev)
struct rte_mbuf *mbuf = NULL;
struct vpool *vpool;
hpa_type addr_type;
+ struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
- vpool = &vpool_array[dev->vmdq_rx_q];
+ vpool = &vpool_array[vdev->vmdq_rx_q];
vq = dev->virtqueue[VIRTIO_RXQ];
do {
- if (unlikely(get_available_ring_index_zcp(dev, &res_base_idx,
+ if (unlikely(get_available_ring_index_zcp(vdev->dev, &res_base_idx,
1) != 1))
return;
desc_idx = vq->avail->ring[(res_base_idx) & (vq->size - 1)];
@@ -1475,12 +1483,12 @@ attach_rxmbuf_zcp(struct virtio_net *dev)
if (desc->flags & VRING_DESC_F_NEXT) {
desc = &vq->desc[desc->next];
buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len,
+ phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len,
&addr_type);
} else {
buff_addr = gpa_to_vva(dev,
desc->addr + vq->vhost_hlen);
- phys_addr = gpa_to_hpa(dev,
+ phys_addr = gpa_to_hpa(vdev,
desc->addr + vq->vhost_hlen,
desc->len, &addr_type);
}
@@ -1830,21 +1838,21 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
*/
vlan_tag = external_pkt_default_vlan_tag;
while (dev_ll != NULL) {
- if (likely(dev_ll->dev->ready == DEVICE_RX) &&
+ if (likely(dev_ll->vdev->ready == DEVICE_RX) &&
ether_addr_cmp(&(pkt_hdr->d_addr),
- &dev_ll->dev->mac_address)) {
+ &dev_ll->vdev->mac_address)) {
/*
* Drop the packet if the TX packet is destined
* for the TX device.
*/
- if (unlikely(dev_ll->dev->device_fh
+ if (unlikely(dev_ll->vdev->dev->device_fh
== dev->device_fh)) {
LOG_DEBUG(VHOST_DATA,
"(%"PRIu64") TX: Source and destination"
"MAC addresses are the same. Dropping "
"packet.\n",
- dev_ll->dev->device_fh);
+ dev_ll->vdev->dev->device_fh);
MBUF_HEADROOM_UINT32(mbuf)
= (uint32_t)desc_idx;
__rte_mbuf_raw_free(mbuf);
@@ -1858,12 +1866,12 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
offset = 4;
vlan_tag =
(uint16_t)
- vlan_tags[(uint16_t)dev_ll->dev->device_fh];
+ vlan_tags[(uint16_t)dev_ll->vdev->dev->device_fh];
LOG_DEBUG(VHOST_DATA,
"(%"PRIu64") TX: pkt to local VM device id:"
"(%"PRIu64") vlan tag: %d.\n",
- dev->device_fh, dev_ll->dev->device_fh,
+ dev->device_fh, dev_ll->vdev->dev->device_fh,
vlan_tag);
break;
@@ -1948,6 +1956,7 @@ virtio_dev_tx_zcp(struct virtio_net *dev)
uint16_t avail_idx;
uint8_t need_copy = 0;
hpa_type addr_type;
+ struct vhost_dev *vdev = (struct vhost_dev *)dev->priv;
vq = dev->virtqueue[VIRTIO_TXQ];
avail_idx = *((volatile uint16_t *)&vq->avail->idx);
@@ -1991,7 +2000,7 @@ virtio_dev_tx_zcp(struct virtio_net *dev)
/* Buffer address translation. */
buff_addr = gpa_to_vva(dev, desc->addr);
- phys_addr = gpa_to_hpa(dev, desc->addr, desc->len, &addr_type);
+ phys_addr = gpa_to_hpa(vdev, desc->addr, desc->len, &addr_type);
if (likely(packet_success < (free_entries - 1)))
/* Prefetch descriptor index. */
@@ -2040,8 +2049,8 @@ virtio_dev_tx_zcp(struct virtio_net *dev)
* If this is the first received packet we need to learn
* the MAC and setup VMDQ
*/
- if (unlikely(dev->ready == DEVICE_MAC_LEARNING)) {
- if (dev->remove || (link_vmdq(dev, &m) == -1)) {
+ if (unlikely(vdev->ready == DEVICE_MAC_LEARNING)) {
+ if (vdev->remove || (link_vmdq(vdev, &m) == -1)) {
/*
* Discard frame if device is scheduled for
* removal or a duplicate MAC address is found.
@@ -2066,6 +2075,7 @@ static int
switch_worker_zcp(__attribute__((unused)) void *arg)
{
struct virtio_net *dev = NULL;
+ struct vhost_dev *vdev = NULL;
struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
struct virtio_net_data_ll *dev_ll;
struct mbuf_table *tx_q;
@@ -2094,12 +2104,13 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
* put back into vpool.ring.
*/
dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
+ while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
/* Get virtio device ID */
- dev = dev_ll->dev;
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
- if (likely(!dev->remove)) {
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ if (likely(!vdev->remove)) {
+ tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q];
if (tx_q->len) {
LOG_DEBUG(VHOST_DATA,
"TX queue drained after timeout"
@@ -2124,7 +2135,7 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
tx_q->len = 0;
txmbuf_clean_zcp(dev,
- &vpool_array[MAX_QUEUES+dev->vmdq_rx_q]);
+ &vpool_array[MAX_QUEUES+vdev->vmdq_rx_q]);
}
}
dev_ll = dev_ll->next;
@@ -2144,17 +2155,18 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
/* Process devices */
dev_ll = lcore_ll->ll_root_used;
- while ((dev_ll != NULL) && (dev_ll->dev != NULL)) {
- dev = dev_ll->dev;
- if (unlikely(dev->remove)) {
+ while ((dev_ll != NULL) && (dev_ll->vdev != NULL)) {
+ vdev = dev_ll->vdev;
+ dev = vdev->dev;
+ if (unlikely(vdev->remove)) {
dev_ll = dev_ll->next;
- unlink_vmdq(dev);
- dev->ready = DEVICE_SAFE_REMOVE;
+ unlink_vmdq(vdev);
+ vdev->ready = DEVICE_SAFE_REMOVE;
continue;
}
- if (likely(dev->ready == DEVICE_RX)) {
- uint32_t index = dev->vmdq_rx_q;
+ if (likely(vdev->ready == DEVICE_RX)) {
+ uint32_t index = vdev->vmdq_rx_q;
uint16_t i;
count_in_ring
= rte_ring_count(vpool_array[index].ring);
@@ -2173,7 +2185,7 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
/* Handle guest RX */
rx_count = rte_eth_rx_burst(ports[0],
- (uint16_t)dev->vmdq_rx_q, pkts_burst,
+ vdev->vmdq_rx_q, pkts_burst,
MAX_PKT_BURST);
if (rx_count) {
@@ -2196,7 +2208,7 @@ switch_worker_zcp(__attribute__((unused)) void *arg)
}
}
- if (likely(!dev->remove))
+ if (likely(!vdev->remove))
/* Handle guest TX */
virtio_dev_tx_zcp(dev);
@@ -2309,7 +2321,7 @@ alloc_data_ll(uint32_t size)
}
for (i = 0; i < size - 1; i++) {
- ll_new[i].dev = NULL;
+ ll_new[i].vdev = NULL;
ll_new[i].next = &ll_new[i+1];
}
ll_new[i].next = NULL;
@@ -2370,21 +2382,22 @@ destroy_device (volatile struct virtio_net *dev)
struct virtio_net_data_ll *ll_main_dev_cur;
struct virtio_net_data_ll *ll_lcore_dev_last = NULL;
struct virtio_net_data_ll *ll_main_dev_last = NULL;
+ struct vhost_dev *vdev;
int lcore;
dev->flags &= ~VIRTIO_DEV_RUNNING;
+ vdev = (struct vhost_dev *)dev->priv;
/*set the remove flag. */
- dev->remove = 1;
-
- while(dev->ready != DEVICE_SAFE_REMOVE) {
+ vdev->remove = 1;
+ while(vdev->ready != DEVICE_SAFE_REMOVE) {
rte_pause();
}
/* Search for entry to be removed from lcore ll */
- ll_lcore_dev_cur = lcore_info[dev->coreid].lcore_ll->ll_root_used;
+ ll_lcore_dev_cur = lcore_info[vdev->coreid].lcore_ll->ll_root_used;
while (ll_lcore_dev_cur != NULL) {
- if (ll_lcore_dev_cur->dev == dev) {
+ if (ll_lcore_dev_cur->vdev == vdev) {
break;
} else {
ll_lcore_dev_last = ll_lcore_dev_cur;
@@ -2403,7 +2416,7 @@ destroy_device (volatile struct virtio_net *dev)
ll_main_dev_cur = ll_root_used;
ll_main_dev_last = NULL;
while (ll_main_dev_cur != NULL) {
- if (ll_main_dev_cur->dev == dev) {
+ if (ll_main_dev_cur->vdev == vdev) {
break;
} else {
ll_main_dev_last = ll_main_dev_cur;
@@ -2412,7 +2425,7 @@ destroy_device (volatile struct virtio_net *dev)
}
/* Remove entries from the lcore and main ll. */
- rm_data_ll_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
+ rm_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_lcore_dev_cur, ll_lcore_dev_last);
rm_data_ll_entry(&ll_root_used, ll_main_dev_cur, ll_main_dev_last);
/* Set the dev_removal_flag on each lcore. */
@@ -2432,51 +2445,52 @@ destroy_device (volatile struct virtio_net *dev)
}
/* Add the entries back to the lcore and main free ll.*/
- put_data_ll_free_entry(&lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
+ put_data_ll_free_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_free, ll_lcore_dev_cur);
put_data_ll_free_entry(&ll_root_free, ll_main_dev_cur);
/* Decrement number of device on the lcore. */
- lcore_info[ll_lcore_dev_cur->dev->coreid].lcore_ll->device_num--;
+ lcore_info[vdev->coreid].lcore_ll->device_num--;
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been removed from data core\n", dev->device_fh);
if (zero_copy) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+ struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q];
/* Stop the RX queue. */
- if (rte_eth_dev_rx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ if (rte_eth_dev_rx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) {
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") In destroy_device: Failed to stop "
"rx queue:%d\n",
dev->device_fh,
- dev->vmdq_rx_q);
+ vdev->vmdq_rx_q);
}
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") in destroy_device: Start put mbuf in "
"mempool back to ring for RX queue: %d\n",
- dev->device_fh, dev->vmdq_rx_q);
+ dev->device_fh, vdev->vmdq_rx_q);
mbuf_destroy_zcp(vpool);
/* Stop the TX queue. */
- if (rte_eth_dev_tx_queue_stop(ports[0], dev->vmdq_rx_q) != 0) {
+ if (rte_eth_dev_tx_queue_stop(ports[0], vdev->vmdq_rx_q) != 0) {
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") In destroy_device: Failed to "
"stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
+ dev->device_fh, vdev->vmdq_rx_q);
}
- vpool = &vpool_array[dev->vmdq_rx_q + MAX_QUEUES];
+ vpool = &vpool_array[vdev->vmdq_rx_q + MAX_QUEUES];
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") destroy_device: Start put mbuf in mempool "
"back to ring for TX queue: %d, dev:(%"PRIu64")\n",
- dev->device_fh, (dev->vmdq_rx_q + MAX_QUEUES),
+ dev->device_fh, (vdev->vmdq_rx_q + MAX_QUEUES),
dev->device_fh);
mbuf_destroy_zcp(vpool);
}
+ rte_free(vdev);
}
@@ -2637,6 +2651,17 @@ new_device (struct virtio_net *dev)
struct virtio_net_data_ll *ll_dev;
int lcore, core_add = 0;
uint32_t device_num_min = num_devices;
+ struct vhost_dev *vdev;
+
+
+ vdev = rte_zmalloc("vhost device", sizeof(*vdev), CACHE_LINE_SIZE);
+ if (vdev == NULL) {
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Couldn't allocate memory for vhost dev\n",
+ dev->device_fh);
+ return -1;
+ }
+ vdev->dev = dev;
+ dev->priv = vdev;
/* Add device to main ll */
ll_dev = get_data_ll_free_entry(&ll_root_free);
@@ -2644,15 +2669,16 @@ new_device (struct virtio_net *dev)
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
"of %d devices per core has been reached\n",
dev->device_fh, num_devices);
+ rte_free(vdev);
return -1;
}
- ll_dev->dev = dev;
+ ll_dev->vdev = vdev;
add_data_ll_entry(&ll_root_used, ll_dev);
- ll_dev->dev->vmdq_rx_q
- = ll_dev->dev->device_fh * (num_queues / num_devices);
+ vdev->vmdq_rx_q
+ = dev->device_fh * (num_queues / num_devices);
if (zero_copy) {
- uint32_t index = ll_dev->dev->vmdq_rx_q;
+ uint32_t index = vdev->vmdq_rx_q;
uint32_t count_in_ring, i;
struct mbuf_table *tx_q;
@@ -2676,54 +2702,56 @@ new_device (struct virtio_net *dev)
LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
"mempool after attach is: %d\n",
- dev->device_fh,
+ dev->device_fh,
rte_mempool_count(vpool_array[index].pool));
LOG_DEBUG(VHOST_CONFIG, "(%"PRIu64") in new_device: mbuf count in "
"ring after attach is : %d\n",
dev->device_fh,
rte_ring_count(vpool_array[index].ring));
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
- tx_q->txq_id = dev->vmdq_rx_q;
+ tx_q = &tx_queue_zcp[(uint16_t)vdev->vmdq_rx_q];
+ tx_q->txq_id = vdev->vmdq_rx_q;
- if (rte_eth_dev_tx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+ if (rte_eth_dev_tx_queue_start(ports[0], vdev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q];
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") In new_device: Failed to start "
"tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
+ dev->device_fh, vdev->vmdq_rx_q);
mbuf_destroy_zcp(vpool);
+ rte_free(vdev);
return -1;
}
- if (rte_eth_dev_rx_queue_start(ports[0], dev->vmdq_rx_q) != 0) {
- struct vpool *vpool = &vpool_array[dev->vmdq_rx_q];
+ if (rte_eth_dev_rx_queue_start(ports[0], vdev->vmdq_rx_q) != 0) {
+ struct vpool *vpool = &vpool_array[vdev->vmdq_rx_q];
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") In new_device: Failed to start "
"rx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
+ dev->device_fh, vdev->vmdq_rx_q);
/* Stop the TX queue. */
if (rte_eth_dev_tx_queue_stop(ports[0],
- dev->vmdq_rx_q) != 0) {
+ vdev->vmdq_rx_q) != 0) {
LOG_DEBUG(VHOST_CONFIG,
"(%"PRIu64") In new_device: Failed to "
"stop tx queue:%d\n",
- dev->device_fh, dev->vmdq_rx_q);
+ dev->device_fh, vdev->vmdq_rx_q);
}
mbuf_destroy_zcp(vpool);
+ rte_free(vdev);
return -1;
}
}
/*reset ready flag*/
- dev->ready = DEVICE_MAC_LEARNING;
- dev->remove = 0;
+ vdev->ready = DEVICE_MAC_LEARNING;
+ vdev->remove = 0;
/* Find a suitable lcore to add the device. */
RTE_LCORE_FOREACH_SLAVE(lcore) {
@@ -2737,11 +2765,14 @@ new_device (struct virtio_net *dev)
ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
if (ll_dev == NULL) {
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
- dev->ready = DEVICE_SAFE_REMOVE;
+ vdev->ready = DEVICE_SAFE_REMOVE;
destroy_device(dev);
+ rte_free(vdev);
return -1;
}
- ll_dev->dev = dev;
+ ll_dev->vdev = vdev;
+ vdev->coreid = core_add;
+
add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
/* Initialize device stats */
@@ -2749,10 +2780,10 @@ new_device (struct virtio_net *dev)
/* Disable notifications. */
set_irq_status(dev);
- lcore_info[ll_dev->dev->coreid].lcore_ll->device_num++;
+ lcore_info[vdev->coreid].lcore_ll->device_num++;
dev->flags |= VIRTIO_DEV_RUNNING;
- RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, dev->coreid);
+ RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Device has been added to data core %d\n", dev->device_fh, vdev->coreid);
return 0;
}
@@ -2791,7 +2822,7 @@ print_stats(void)
dev_ll = ll_root_used;
while (dev_ll != NULL) {
- device_fh = (uint32_t)dev_ll->dev->device_fh;
+ device_fh = (uint32_t)dev_ll->vdev->dev->device_fh;
tx_total = dev_statistics[device_fh].tx_total;
tx = dev_statistics[device_fh].tx;
tx_dropped = tx_total - tx;
diff --git a/examples/vhost/main.h b/examples/vhost/main.h
index ebb0b5b..66e2fce 100644
--- a/examples/vhost/main.h
+++ b/examples/vhost/main.h
@@ -72,12 +72,33 @@ struct virtio_memory_regions_hpa {
uint64_t host_phys_addr_offset;
};
-/*
+/**
* Device linked list structure for data path.
*/
+struct vhost_dev {
+ /**< Pointer to device created by vhost lib. */
+ struct virtio_net *dev;
+ /**< Number of memory regions for gpa to hpa translation. */
+ uint32_t nregions_hpa;
+ /**< Memory region information for gpa to hpa translation. */
+ struct virtio_memory_regions_hpa *regions_hpa;
+ /**< Device MAC address (Obtained on first TX packet). */
+ struct ether_addr mac_address;
+ /**< RX VMDQ queue number. */
+ uint16_t vmdq_rx_q;
+ /**< Vlan tag assigned to the pool */
+ uint32_t vlan_tag;
+ /**< Data core that the device is added to. */
+ uint16_t coreid;
+ /**< A device is set as ready if the MAC address has been set. */
+ volatile uint8_t ready;
+ /**< Device is marked for removal from the data core. */
+ volatile uint8_t remove;
+} __rte_cache_aligned;
+
struct virtio_net_data_ll
{
- struct virtio_net *dev; /* Pointer to device created by configuration core. */
+ struct vhost_dev *vdev; /* Pointer to device created by configuration core. */
struct virtio_net_data_ll *next; /* Pointer to next device in linked list. */
};
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 05/14] hpa region
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (3 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 04/14] dev->vdev Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 06/14] enqueue_burst, dequeue_burst, mac learning Huawei Xie
` (10 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
add hpa(host physical address) region generation/destroy logic.
gpa<->hpa memory translation regions are generated at new_device, when a
virtio device is ready for packet processing.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 44 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 43 insertions(+), 1 deletion(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 03a0f48..e161282 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -2489,6 +2489,7 @@ destroy_device (volatile struct virtio_net *dev)
dev->device_fh);
mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
}
rte_free(vdev);
@@ -2652,7 +2653,7 @@ new_device (struct virtio_net *dev)
int lcore, core_add = 0;
uint32_t device_num_min = num_devices;
struct vhost_dev *vdev;
-
+ uint32_t regionidx;
vdev = rte_zmalloc("vhost device", sizeof(*vdev), CACHE_LINE_SIZE);
if (vdev == NULL) {
@@ -2663,12 +2664,49 @@ new_device (struct virtio_net *dev)
vdev->dev = dev;
dev->priv = vdev;
+ if (zero_copy) {
+ vdev->nregions_hpa = dev->mem->nregions;
+ for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
+ vdev->nregions_hpa
+ += check_hpa_regions(
+ dev->mem->regions[regionidx].guest_phys_address
+ + dev->mem->regions[regionidx].address_offset,
+ dev->mem->regions[regionidx].memory_size);
+
+ }
+
+ vdev->regions_hpa = (struct virtio_memory_regions_hpa *) rte_zmalloc("vhost hpa region",
+ sizeof(struct virtio_memory_regions_hpa) * vdev->nregions_hpa,
+ CACHE_LINE_SIZE);
+ if (vdev->regions_hpa == NULL) {
+ RTE_LOG(ERR, VHOST_CONFIG, "Cannot allocate memory for hpa region\n");
+ rte_free(vdev);
+ return -1;
+ }
+
+
+ if (fill_hpa_memory_regions(
+ vdev->regions_hpa, dev->mem
+ ) != vdev->nregions_hpa) {
+
+ RTE_LOG(ERR, VHOST_CONFIG,
+ "hpa memory regions number mismatch: "
+ "[%d]\n", vdev->nregions_hpa);
+ rte_free(vdev->regions_hpa);
+ rte_free(vdev);
+ return -1;
+ }
+ }
+
+
/* Add device to main ll */
ll_dev = get_data_ll_free_entry(&ll_root_free);
if (ll_dev == NULL) {
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") No free entry found in linked list. Device limit "
"of %d devices per core has been reached\n",
dev->device_fh, num_devices);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
rte_free(vdev);
return -1;
}
@@ -2721,6 +2759,7 @@ new_device (struct virtio_net *dev)
dev->device_fh, vdev->vmdq_rx_q);
mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
rte_free(vdev);
return -1;
}
@@ -2743,6 +2782,7 @@ new_device (struct virtio_net *dev)
}
mbuf_destroy_zcp(vpool);
+ rte_free(vdev->regions_hpa);
rte_free(vdev);
return -1;
}
@@ -2767,6 +2807,8 @@ new_device (struct virtio_net *dev)
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
vdev->ready = DEVICE_SAFE_REMOVE;
destroy_device(dev);
+ if (vdev->regions_hpa)
+ rte_free(vdev->regions_hpa);
rte_free(vdev);
return -1;
}
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 06/14] enqueue_burst, dequeue_burst, mac learning
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (4 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 05/14] hpa region Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 07/14] patch virtio_tx_route Huawei Xie
` (9 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
in switch_worker and virtio_tx_local, rte_vhost_enqueue_burst is called to
push host packets to guest VM.
before enqueue packets to guest VM, vhost example uses configure-able retry logic to wait for
enough vring entries.
in switch_worker, rte_vhost_dequeue_burst is called to get packets from guest VM,
then virtio device will be bound to a queue in VMDQ for the first transmitted
packet.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 53 +++++++++++++++++++++++++--------------------------
1 file changed, 26 insertions(+), 27 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index e161282..aad86f3 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -1061,17 +1061,8 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
/*drop the packet if the device is marked for removal*/
LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh);
} else {
- uint32_t mergeable =
- dev_ll->dev->features &
- (1 << VIRTIO_NET_F_MRG_RXBUF);
-
/*send the packet to the local virtio device*/
- if (likely(mergeable == 0))
- ret = virtio_dev_rx(dev_ll->dev, &m, 1);
- else
- ret = virtio_dev_merge_rx(dev_ll->dev,
- &m, 1);
-
+ ret = rte_vhost_enqueue_burst(tdev, VIRTIO_RXQ, &m, 1);
if (enable_stats) {
rte_atomic64_add(
&dev_statistics[tdev->device_fh].rx_total_atomic,
@@ -1248,7 +1239,8 @@ switch_worker(__attribute__((unused)) void *arg)
const uint16_t lcore_id = rte_lcore_id();
const uint16_t num_cores = (uint16_t)rte_lcore_count();
uint16_t rx_count = 0;
- uint32_t mergeable = 0;
+ uint16_t tx_count;
+ uint32_t retry = 0;
RTE_LOG(INFO, VHOST_DATA, "Procesing on Core %u started\n", lcore_id);
lcore_ll = lcore_info[lcore_id].lcore_ll;
@@ -1307,8 +1299,6 @@ switch_worker(__attribute__((unused)) void *arg)
/*get virtio device ID*/
vdev = dev_ll->vdev;
dev = vdev->dev;
- mergeable =
- dev->features & (1 << VIRTIO_NET_F_MRG_RXBUF);
if (vdev->remove) {
dev_ll = dev_ll->next;
@@ -1322,15 +1312,18 @@ switch_worker(__attribute__((unused)) void *arg)
vdev->vmdq_rx_q, pkts_burst, MAX_PKT_BURST);
if (rx_count) {
- if (likely(mergeable == 0))
- ret_count =
- virtio_dev_rx(dev,
- pkts_burst, rx_count);
- else
- ret_count =
- virtio_dev_merge_rx(dev,
- pkts_burst, rx_count);
-
+ /*
+ * Retry is enabled and the queue is full then we wait and retry to avoid packet loss
+ * Here MAX_PKT_BURST must be less than virtio queue size
+ */
+ if (enable_retry && unlikely(rx_count > rte_vring_available_entries(dev, VIRTIO_RXQ))) {
+ for (retry = 0; retry < burst_rx_retry_num; retry++) {
+ rte_delay_us(burst_rx_delay_time);
+ if (rx_count <= rte_vring_available_entries(dev, VIRTIO_RXQ))
+ break;
+ }
+ }
+ ret_count = rte_vhost_enqueue_burst(dev, VIRTIO_RXQ, pkts_burst, rx_count);
if (enable_stats) {
rte_atomic64_add(
&dev_statistics[dev_ll->vdev->dev->device_fh].rx_total_atomic,
@@ -1347,11 +1340,17 @@ switch_worker(__attribute__((unused)) void *arg)
}
if (!vdev->remove) {
- /*Handle guest TX*/
- if (likely(mergeable == 0))
- virtio_dev_tx(dev, mbuf_pool);
- else
- virtio_dev_merge_tx(dev, mbuf_pool);
+ /* Handle guest TX*/
+ tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
+ /* If this is the first received packet we need to learn the MAC and setup VMDQ */
+ if (unlikely(vdev->ready == DEVICE_MAC_LEARNING) && tx_count) {
+ if (vdev->remove || (link_vmdq(vdev, pkts_burst[0]) == -1)) {
+ while (tx_count--)
+ rte_pktmbuf_free(pkts_burst[tx_count]);
+ }
+ }
+ while (tx_count)
+ virtio_tx_route(vdev, pkts_burst[--tx_count], mbuf_pool, (uint16_t)dev->device_fh);
}
/*move to the next device in the list*/
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 07/14] patch virtio_tx_route
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (5 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 06/14] enqueue_burst, dequeue_burst, mac learning Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index Huawei Xie
` (8 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
in new vhost example, the packet passed to virtio_tx_route has been allocated
mbuf, so there is no need to allocate mbuf for it.
use vlan offload to transmit vlan tagged packet.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 65 ++++++++-------------------------------------------
1 file changed, 10 insertions(+), 55 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index aad86f3..bbfdef6 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -1091,9 +1091,7 @@ static inline void __attribute__((always_inline))
virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *mbuf_pool, uint16_t vlan_tag)
{
struct mbuf_table *tx_q;
- struct vlan_ethhdr *vlan_hdr;
struct rte_mbuf **m_table;
- struct rte_mbuf *mbuf, *prev;
unsigned len, ret, offset = 0;
const uint16_t lcore_id = rte_lcore_id();
struct virtio_net_data_ll *dev_ll = ll_root_used;
@@ -1101,8 +1099,10 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *
struct virtio_net *dev = vdev->dev;
/*check if destination is local VM*/
- if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(vdev, m) == 0))
+ if ((vm2vm_mode == VM2VM_SOFTWARE) && (virtio_tx_local(vdev, m) == 0)) {
+ rte_pktmbuf_free(m);
return;
+ }
if (vm2vm_mode == VM2VM_HARDWARE) {
while (dev_ll != NULL) {
@@ -1118,7 +1118,8 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *
"(%"PRIu64") TX: Source and destination"
" MAC addresses are the same. Dropping "
"packet.\n",
- dev_ll->vdev->device_fh);
+ dev_ll->vdev->dev->device_fh);
+ rte_pktmbuf_free(m);
return;
}
offset = 4;
@@ -1144,58 +1145,12 @@ virtio_tx_route(struct vhost_dev *vdev, struct rte_mbuf *m, struct rte_mempool *
tx_q = &lcore_tx_queue[lcore_id];
len = tx_q->len;
- /* Allocate an mbuf and populate the structure. */
- mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(mbuf == NULL)) {
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- mbuf->data_len = m->data_len + VLAN_HLEN + offset;
- mbuf->pkt_len = m->pkt_len + VLAN_HLEN + offset;
- mbuf->nb_segs = m->nb_segs;
+ m->ol_flags = PKT_TX_VLAN_PKT;
+ /*FIXME: offset*/
+ m->data_len += offset;
+ m->vlan_tci = vlan_tag;
- /* Copy ethernet header to mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(mbuf, void *),
- rte_pktmbuf_mtod(m, const void *),
- ETH_HLEN);
-
-
- /* Setup vlan header. Bytes need to be re-ordered for network with htons()*/
- vlan_hdr = rte_pktmbuf_mtod(mbuf, struct vlan_ethhdr *);
- vlan_hdr->h_vlan_encapsulated_proto = vlan_hdr->h_vlan_proto;
- vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
- vlan_hdr->h_vlan_TCI = htons(vlan_tag);
-
- /* Copy the remaining packet contents to the mbuf. */
- rte_memcpy((void *)(rte_pktmbuf_mtod(mbuf, uint8_t *) + VLAN_ETH_HLEN),
- (const void *)(rte_pktmbuf_mtod(m, uint8_t *) + ETH_HLEN),
- (m->data_len - ETH_HLEN));
-
- /* Copy the remaining segments for the whole packet. */
- prev = mbuf;
- while (m->next) {
- /* Allocate an mbuf and populate the structure. */
- struct rte_mbuf *next_mbuf = rte_pktmbuf_alloc(mbuf_pool);
- if (unlikely(next_mbuf == NULL)) {
- rte_pktmbuf_free(mbuf);
- RTE_LOG(ERR, VHOST_DATA,
- "Failed to allocate memory for mbuf.\n");
- return;
- }
-
- m = m->next;
- prev->next = next_mbuf;
- prev = next_mbuf;
- next_mbuf->data_len = m->data_len;
-
- /* Copy data to next mbuf. */
- rte_memcpy(rte_pktmbuf_mtod(next_mbuf, void *),
- rte_pktmbuf_mtod(m, const void *), m->data_len);
- }
-
- tx_q->m_table[len] = mbuf;
+ tx_q->m_table[len] = m;
len++;
if (enable_stats) {
dev_statistics[dev->device_fh].tx_total++;
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (6 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 07/14] patch virtio_tx_route Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-23 9:43 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 09/14] other APIs Huawei Xie
` (7 subsequent siblings)
15 siblings, 1 reply; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
remove gpa_to_vva macro and base_index parameter.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 42 +-----------------------------------------
1 file changed, 1 insertion(+), 41 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index bbfdef6..aaac88b 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -218,8 +218,6 @@ static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
/* Character device basename. Can be set by user. */
static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
-/* Charater device index. Can be set by user. */
-static uint32_t dev_index = 0;
/* This can be set by the user so it is made available here. */
extern uint64_t VHOST_FEATURES;
@@ -560,7 +558,7 @@ us_vhost_usage(const char *prgname)
RTE_LOG(INFO, VHOST_CONFIG, "%s [EAL options] -- -p PORTMASK\n"
" --vm2vm [0|1|2]\n"
" --rx_retry [0|1] --mergeable [0|1] --stats [0-N]\n"
- " --dev-basename <name> --dev-index [0-N]\n"
+ " --dev-basename <name>\n"
" --nb-devices ND\n"
" -p PORTMASK: Set mask for ports to be used by application\n"
" --vm2vm [0|1|2]: disable/software(default)/hardware vm2vm comms\n"
@@ -570,7 +568,6 @@ us_vhost_usage(const char *prgname)
" --mergeable [0|1]: disable(default)/enable RX mergeable buffers\n"
" --stats [0-N]: 0: Disable stats, N: Time in seconds to print stats\n"
" --dev-basename: The basename to be used for the character device.\n"
- " --dev-index [0-N]: Defaults to zero if not used. Index is appended to basename.\n"
" --zero-copy [0|1]: disable(default)/enable rx/tx "
"zero copy\n"
" --rx-desc-num [0-N]: the number of descriptors on rx, "
@@ -598,7 +595,6 @@ us_vhost_parse_args(int argc, char **argv)
{"mergeable", required_argument, NULL, 0},
{"stats", required_argument, NULL, 0},
{"dev-basename", required_argument, NULL, 0},
- {"dev-index", required_argument, NULL, 0},
{"zero-copy", required_argument, NULL, 0},
{"rx-desc-num", required_argument, NULL, 0},
{"tx-desc-num", required_argument, NULL, 0},
@@ -708,17 +704,6 @@ us_vhost_parse_args(int argc, char **argv)
}
}
- /* Set character device index. */
- if (!strncmp(long_option[option_index].name, "dev-index", MAX_LONG_OPT_SZ)) {
- ret = parse_num_opt(optarg, INT32_MAX);
- if (ret == -1) {
- RTE_LOG(INFO, VHOST_CONFIG, "Invalid argument for character device index [0..N]\n");
- us_vhost_usage(prgname);
- return -1;
- } else
- dev_index = ret;
- }
-
/* Enable/disable rx/tx zero copy. */
if (!strncmp(long_option[option_index].name,
"zero-copy", MAX_LONG_OPT_SZ)) {
@@ -867,31 +852,6 @@ static unsigned check_ports_num(unsigned nb_ports)
#endif
/*
- * Function to convert guest physical addresses to vhost virtual addresses. This
- * is used to convert virtio buffer addresses.
- */
-static inline uint64_t __attribute__((always_inline))
-gpa_to_vva(struct virtio_net *dev, uint64_t guest_pa)
-{
- struct virtio_memory_regions *region;
- uint32_t regionidx;
- uint64_t vhost_va = 0;
-
- for (regionidx = 0; regionidx < dev->mem->nregions; regionidx++) {
- region = &dev->mem->regions[regionidx];
- if ((guest_pa >= region->guest_phys_address) &&
- (guest_pa <= region->guest_phys_address_end)) {
- vhost_va = region->address_offset + guest_pa;
- break;
- }
- }
- LOG_DEBUG(VHOST_DATA, "(%"PRIu64") GPA %p| VVA %p\n",
- dev->device_fh, (void*)(uintptr_t)guest_pa, (void*)(uintptr_t)vhost_va);
-
- return vhost_va;
-}
-
-/*
* Function to convert guest physical addresses to vhost physical addresses.
* This is used to convert virtio buffer addresses.
*/
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 09/14] other APIs
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (7 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-23 9:44 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 10/14] vmdq_rx_q Huawei Xie
` (6 subsequent siblings)
15 siblings, 1 reply; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
other vhost APIs
rte_vhost_driver_register: register vhost driver
rte_vhost_driver_callback_register: register new_device/destroy_device callback
rte_vhost_driver_session_start: start vhost session loop
rte_vhost_feature_disable: disable merge-able feature
rte_vhost_enable_guest_notification: disable guest notification
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 29 ++++++++++-------------------
1 file changed, 10 insertions(+), 19 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index aaac88b..e0bd452 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -175,6 +175,7 @@ uint32_t num_devices = 0;
* disabled on default.
*/
static uint32_t zero_copy;
+static int mergeable;
/* number of descriptors to apply*/
static uint32_t num_rx_descriptor = RTE_TEST_RX_DESC_DEFAULT_ZCP;
@@ -218,10 +219,6 @@ static uint32_t burst_rx_retry_num = BURST_RX_RETRIES;
/* Character device basename. Can be set by user. */
static char dev_basename[MAX_BASENAME_SZ] = "vhost-net";
-
-/* This can be set by the user so it is made available here. */
-extern uint64_t VHOST_FEATURES;
-
/* Default configuration for rx and tx thresholds etc. */
static struct rte_eth_rxconf rx_conf_default = {
.rx_thresh = {
@@ -674,11 +671,11 @@ us_vhost_parse_args(int argc, char **argv)
us_vhost_usage(prgname);
return -1;
} else {
+ mergeable = !!ret;
if (ret) {
vmdq_conf_default.rxmode.jumbo_frame = 1;
vmdq_conf_default.rxmode.max_rx_pkt_len
= JUMBO_FRAME_MAX_SIZE;
- VHOST_FEATURES = (1ULL << VIRTIO_NET_F_MRG_RXBUF);
}
}
}
@@ -2275,16 +2272,6 @@ init_data_ll (void)
}
/*
- * Set virtqueue flags so that we do not receive interrupts.
- */
-static void
-set_irq_status (struct virtio_net *dev)
-{
- dev->virtqueue[VIRTIO_RXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
- dev->virtqueue[VIRTIO_TXQ]->used->flags = VRING_USED_F_NO_NOTIFY;
-}
-
-/*
* Remove a device from the specific data core linked list and from the main linked list. Synchonization
* occurs through the use of the lcore dev_removal_flag. Device is made volatile here to avoid re-ordering
* of dev->remove=1 which can cause an infinite loop in the rte_pause loop.
@@ -2735,7 +2722,8 @@ new_device (struct virtio_net *dev)
memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
/* Disable notifications. */
- set_irq_status(dev);
+ rte_vhost_enable_guest_notification(dev, VIRTIO_RXQ, 0);
+ rte_vhost_enable_guest_notification(dev, VIRTIO_TXQ, 0);
lcore_info[vdev->coreid].lcore_ll->device_num++;
dev->flags |= VIRTIO_DEV_RUNNING;
@@ -3040,15 +3028,18 @@ MAIN(int argc, char *argv[])
lcore_id);
}
+ if (mergeable == 0)
+ rte_vhost_feature_disable(1ULL << VIRTIO_NET_F_MRG_RXBUF);
+
/* Register CUSE device to handle IOCTLs. */
- ret = register_cuse_device((char*)&dev_basename, dev_index, get_virtio_net_callbacks());
+ ret = rte_vhost_driver_register((char *)&dev_basename);
if (ret != 0)
rte_exit(EXIT_FAILURE,"CUSE device setup failure.\n");
- init_virtio_net(&virtio_net_device_ops);
+ rte_vhost_driver_callback_register(&virtio_net_device_ops);
/* Start CUSE session. */
- start_cuse_session_loop();
+ rte_vhost_driver_session_start();
return 0;
}
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 10/14] vmdq_rx_q
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (8 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 09/14] other APIs Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-23 9:45 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 11/14] minor fixes Huawei Xie
` (5 subsequent siblings)
15 siblings, 1 reply; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
vmdq_rx_q minior change
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index e0bd452..15cb493 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -1722,13 +1722,14 @@ virtio_tx_route_zcp(struct virtio_net *dev, struct rte_mbuf *m,
struct virtio_net_data_ll *dev_ll = ll_root_used;
struct ether_hdr *pkt_hdr = rte_pktmbuf_mtod(m, struct ether_hdr *);
uint16_t vlan_tag = (uint16_t)vlan_tags[(uint16_t)dev->device_fh];
+ uint16_t vmdq_rx_q = ((struct vhost_dev *)dev->priv)->vmdq_rx_q;
/*Add packet to the port tx queue*/
- tx_q = &tx_queue_zcp[(uint16_t)dev->vmdq_rx_q];
+ tx_q = &tx_queue_zcp[vmdq_rx_q];
len = tx_q->len;
/* Allocate an mbuf and populate the structure. */
- vpool = &vpool_array[MAX_QUEUES + (uint16_t)dev->vmdq_rx_q];
+ vpool = &vpool_array[MAX_QUEUES + vmdq_rx_q];
rte_ring_sc_dequeue(vpool->ring, (void **)&mbuf);
if (unlikely(mbuf == NULL)) {
struct vhost_virtqueue *vq = dev->virtqueue[VIRTIO_TXQ];
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 11/14] minor fixes
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (9 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 10/14] vmdq_rx_q Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 12/14] add branch hint Huawei Xie
` (4 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
minimal adjustment
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 13 +++++--------
1 file changed, 5 insertions(+), 8 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index 15cb493..b2b92e9 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -49,10 +49,9 @@
#include <rte_log.h>
#include <rte_string_fns.h>
#include <rte_malloc.h>
+#include <rte_virtio_net.h>
#include "main.h"
-#include "virtio-net.h"
-#include "vhost-net-cdev.h"
#define MAX_QUEUES 128
@@ -100,7 +99,6 @@
#define TX_WTHRESH 0 /* Default values of TX write-back threshold reg. */
#define MAX_PKT_BURST 32 /* Max burst size for RX/TX */
-#define MAX_MRG_PKT_BURST 16 /* Max burst for merge buffers. Set to 1 due to performance issue. */
#define BURST_TX_DRAIN_US 100 /* TX drain every ~100us */
#define BURST_RX_WAIT_US 15 /* Defines how long we wait between retries on RX */
@@ -168,7 +166,7 @@ static uint32_t num_switching_cores = 0;
/* number of devices/queues to support*/
static uint32_t num_queues = 0;
-uint32_t num_devices = 0;
+static uint32_t num_devices;
/*
* Enable zero copy, pkts buffer will directly dma to hw descriptor,
@@ -985,7 +983,7 @@ unlink_vmdq(struct vhost_dev *vdev)
* Check if the packet destination MAC address is for a local device. If so then put
* the packet on that devices RX queue. If not then return.
*/
-static inline unsigned __attribute__((always_inline))
+static inline int __attribute__((always_inline))
virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
{
struct virtio_net_data_ll *dev_ll;
@@ -2703,8 +2701,7 @@ new_device (struct virtio_net *dev)
}
}
/* Add device to lcore ll */
- ll_dev->dev->coreid = core_add;
- ll_dev = get_data_ll_free_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_free);
+ ll_dev = get_data_ll_free_entry(&lcore_info[core_add].lcore_ll->ll_root_free);
if (ll_dev == NULL) {
RTE_LOG(INFO, VHOST_DATA, "(%"PRIu64") Failed to add device to data core\n", dev->device_fh);
vdev->ready = DEVICE_SAFE_REMOVE;
@@ -2717,7 +2714,7 @@ new_device (struct virtio_net *dev)
ll_dev->vdev = vdev;
vdev->coreid = core_add;
- add_data_ll_entry(&lcore_info[ll_dev->dev->coreid].lcore_ll->ll_root_used, ll_dev);
+ add_data_ll_entry(&lcore_info[vdev->coreid].lcore_ll->ll_root_used, ll_dev);
/* Initialize device stats */
memset(&dev_statistics[dev->device_fh], 0, sizeof(struct device_statistics));
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 12/14] add branch hint
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (10 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 11/14] minor fixes Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 13/14] INC_VEC Huawei Xie
` (3 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
add branch hint
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index b2b92e9..fb22df4 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -1012,7 +1012,7 @@ virtio_tx_local(struct vhost_dev *vdev, struct rte_mbuf *m)
LOG_DEBUG(VHOST_DATA, "(%"PRIu64") TX: MAC address is local\n", tdev->device_fh);
- if (dev_ll->vdev->remove) {
+ if (unlikely(dev_ll->vdev->remove)) {
/*drop the packet if the device is marked for removal*/
LOG_DEBUG(VHOST_DATA, "(%"PRIu64") Device is marked for removal\n", tdev->device_fh);
} else {
@@ -1210,7 +1210,7 @@ switch_worker(__attribute__((unused)) void *arg)
vdev = dev_ll->vdev;
dev = vdev->dev;
- if (vdev->remove) {
+ if (unlikely(vdev->remove)) {
dev_ll = dev_ll->next;
unlink_vmdq(vdev);
vdev->ready = DEVICE_SAFE_REMOVE;
@@ -1249,7 +1249,7 @@ switch_worker(__attribute__((unused)) void *arg)
}
}
- if (!vdev->remove) {
+ if (likely(!vdev->remove)) {
/* Handle guest TX*/
tx_count = rte_vhost_dequeue_burst(dev, VIRTIO_TXQ, mbuf_pool, pkts_burst, MAX_PKT_BURST);
/* If this is the first received packet we need to learn the MAC and setup VMDQ */
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 13/14] INC_VEC
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (11 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 12/14] add branch hint Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 14/14] Makefile Huawei Xie
` (2 subsequent siblings)
15 siblings, 0 replies; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
mergeable feature doesn't work with latest mbuf change.
find that we could disable IXGBE_INC_VECTOR as a workaround.
root cause is WIP.
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/main.c | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/examples/vhost/main.c b/examples/vhost/main.c
index fb22df4..18ab82e 100644
--- a/examples/vhost/main.c
+++ b/examples/vhost/main.c
@@ -2862,7 +2862,14 @@ MAIN(int argc, char *argv[])
ret = us_vhost_parse_args(argc, argv);
if (ret < 0)
rte_exit(EXIT_FAILURE, "Invalid argument\n");
+#ifdef RTE_IXGBE_INC_VECTOR
+ if (mergeable == 1) {
+ rte_exit(EXIT_FAILURE,
+ "sorry, mergeable feature doesn't work with vec sg recv, " \
+ "please disable it in cfg as a workaround\n");
+ }
+#endif
for (lcore_id = 0; lcore_id < RTE_MAX_LCORE; lcore_id ++)
if (rte_lcore_is_enabled(lcore_id))
lcore_ids[core_id ++] = lcore_id;
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [dpdk-dev] [PATCH 14/14] Makefile
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (12 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 13/14] INC_VEC Huawei Xie
@ 2014-10-20 4:38 ` Huawei Xie
2014-10-23 9:48 ` Thomas Monjalon
2014-10-20 5:21 ` [dpdk-dev] [PATCH 00/14] new vhost example Ouyang, Changchun
2014-10-23 11:10 ` Thomas Monjalon
15 siblings, 1 reply; 22+ messages in thread
From: Huawei Xie @ 2014-10-20 4:38 UTC (permalink / raw)
To: dev
new vhost example is ready. Add example makefile
Signed-off-by: Huawei Xie <huawei.xie@intel.com>
---
examples/vhost/Makefile | 60 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 60 insertions(+)
create mode 100644 examples/vhost/Makefile
diff --git a/examples/vhost/Makefile b/examples/vhost/Makefile
new file mode 100644
index 0000000..934bdb2
--- /dev/null
+++ b/examples/vhost/Makefile
@@ -0,0 +1,60 @@
+# BSD LICENSE
+#
+# Copyright(c) 2010-2014 Intel Corporation. All rights reserved.
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+#
+# * Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# * Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in
+# the documentation and/or other materials provided with the
+# distribution.
+# * Neither the name of Intel Corporation nor the names of its
+# contributors may be used to endorse or promote products derived
+# from this software without specific prior written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+ifeq ($(RTE_SDK),)
+$(error "Please define RTE_SDK environment variable")
+endif
+
+# Default target, can be overriden by command line or environment
+RTE_TARGET ?= x86_64-native-linuxapp-gcc
+
+include $(RTE_SDK)/mk/rte.vars.mk
+
+ifneq ($(CONFIG_RTE_EXEC_ENV),"linuxapp")
+$(info This application can only operate in a linuxapp environment, \
+please change the definition of the RTE_TARGET environment variable)
+all:
+else
+
+# binary name
+APP = vhost-switch
+
+# all source are stored in SRCS-y
+#SRCS-y := cusedrv.c loopback-userspace.c
+SRCS-y := main.c
+
+CFLAGS += -O2 -I/usr/local/include -D_FILE_OFFSET_BITS=64 -Wno-unused-parameter
+CFLAGS += $(WERROR_FLAGS)
+LDFLAGS += -lfuse
+
+include $(RTE_SDK)/mk/rte.extapp.mk
+
+endif
--
1.8.1.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 00/14] new vhost example
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (13 preceding siblings ...)
2014-10-20 4:38 ` [dpdk-dev] [PATCH 14/14] Makefile Huawei Xie
@ 2014-10-20 5:21 ` Ouyang, Changchun
2014-10-23 11:10 ` Thomas Monjalon
15 siblings, 0 replies; 22+ messages in thread
From: Ouyang, Changchun @ 2014-10-20 5:21 UTC (permalink / raw)
To: Xie, Huawei, dev
Hi,
> -----Original Message-----
> From: dev [mailto:dev-bounces@dpdk.org] On Behalf Of Huawei Xie
> Sent: Monday, October 20, 2014 12:38 PM
> To: dev@dpdk.org
> Subject: [dpdk-dev] [PATCH 00/14] new vhost example
>
> New vhost example is a transform of old vhost example.
> It calls vhost library API to receive/transmit packets from guest VM.
> zero copy logic is kept in vhost example.
>
Acked-by: Changchun Ouyang <Changchun.ouyang@intel.com>
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index
2014-10-20 4:38 ` [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index Huawei Xie
@ 2014-10-23 9:43 ` Thomas Monjalon
0 siblings, 0 replies; 22+ messages in thread
From: Thomas Monjalon @ 2014-10-23 9:43 UTC (permalink / raw)
To: Huawei Xie; +Cc: dev
2014-10-20 12:38, Huawei Xie:
> remove gpa_to_vva macro and base_index parameter.
gpa_to_vva function should be removed in patch 2
base_index should be removed when implementing registration (next patch)
--
Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 09/14] other APIs
2014-10-20 4:38 ` [dpdk-dev] [PATCH 09/14] other APIs Huawei Xie
@ 2014-10-23 9:44 ` Thomas Monjalon
0 siblings, 0 replies; 22+ messages in thread
From: Thomas Monjalon @ 2014-10-23 9:44 UTC (permalink / raw)
To: Huawei Xie; +Cc: dev
2014-10-20 12:38, Huawei Xie:
> other vhost APIs
> rte_vhost_driver_register: register vhost driver
> rte_vhost_driver_callback_register: register new_device/destroy_device callback
> rte_vhost_driver_session_start: start vhost session loop
> rte_vhost_feature_disable: disable merge-able feature
> rte_vhost_enable_guest_notification: disable guest notification
This patch should be splitted.
I'm doing the adjustment before applying.
--
Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 10/14] vmdq_rx_q
2014-10-20 4:38 ` [dpdk-dev] [PATCH 10/14] vmdq_rx_q Huawei Xie
@ 2014-10-23 9:45 ` Thomas Monjalon
0 siblings, 0 replies; 22+ messages in thread
From: Thomas Monjalon @ 2014-10-23 9:45 UTC (permalink / raw)
To: Huawei Xie; +Cc: dev
2014-10-20 12:38, Huawei Xie:
> vmdq_rx_q minior change
This patch should be merged with vhost_dev structure definition (patch 4).
--
Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 14/14] Makefile
2014-10-20 4:38 ` [dpdk-dev] [PATCH 14/14] Makefile Huawei Xie
@ 2014-10-23 9:48 ` Thomas Monjalon
0 siblings, 0 replies; 22+ messages in thread
From: Thomas Monjalon @ 2014-10-23 9:48 UTC (permalink / raw)
To: Huawei Xie; +Cc: dev
2014-10-20 12:38, Huawei Xie:
> new vhost example is ready. Add example makefile
>
> Signed-off-by: Huawei Xie <huawei.xie@intel.com>
> ---
> examples/vhost/Makefile | 60 +++++++++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 60 insertions(+)
> create mode 100644 examples/vhost/Makefile
A change in examples/Makefile is missing.
I'm fixing it.
--
Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 00/14] new vhost example
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
` (14 preceding siblings ...)
2014-10-20 5:21 ` [dpdk-dev] [PATCH 00/14] new vhost example Ouyang, Changchun
@ 2014-10-23 11:10 ` Thomas Monjalon
2014-10-23 16:17 ` Xie, Huawei
15 siblings, 1 reply; 22+ messages in thread
From: Thomas Monjalon @ 2014-10-23 11:10 UTC (permalink / raw)
To: Huawei Xie; +Cc: dev
2014-10-20 12:38, Huawei Xie:
> New vhost example is a transform of old vhost example.
> It calls vhost library API to receive/transmit packets from guest VM.
> zero copy logic is kept in vhost example.
>
> Huawei Xie (14):
> copy old vhost example files main.c/main.h as the base of new vhost example
> remove virtio_dev_(merge_)rx, copy_from_mbuf_to_ring, virtio_dev_(merge_)tx
> add hpa region check and generation functions
> dev->vdev
> hpa region generation in new_device
> call rte_vhost_enqueue_burst, rte_vhost_dequeue_burst API. Add mac learning and retry logic
> patch virtio_tx_route
> remove gpa_to_vva, base_index
> other APIs
> vmdq_rx_q change
> minimal changes
> add branch hint
> disalbe RTE_IXGBE_INC_VEC as workaround for merge-able feature
> add example Makefile
>
> examples/vhost/Makefile | 60 +
> examples/vhost/main.c | 3051 +++++++++++++++++++++++++++++++++++++++++++++++
> examples/vhost/main.h | 122 ++
I've cleaned up your patchset a bit and applied it.
Thanks
--
Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
* Re: [dpdk-dev] [PATCH 00/14] new vhost example
2014-10-23 11:10 ` Thomas Monjalon
@ 2014-10-23 16:17 ` Xie, Huawei
0 siblings, 0 replies; 22+ messages in thread
From: Xie, Huawei @ 2014-10-23 16:17 UTC (permalink / raw)
To: Thomas Monjalon; +Cc: dev
Thanks for all the effort!
> -----Original Message-----
> From: Thomas Monjalon [mailto:thomas.monjalon@6wind.com]
> Sent: Thursday, October 23, 2014 4:11 AM
> To: Xie, Huawei
> Cc: dev@dpdk.org
> Subject: Re: [dpdk-dev] [PATCH 00/14] new vhost example
>
> 2014-10-20 12:38, Huawei Xie:
> > New vhost example is a transform of old vhost example.
> > It calls vhost library API to receive/transmit packets from guest VM.
> > zero copy logic is kept in vhost example.
> >
> > Huawei Xie (14):
> > copy old vhost example files main.c/main.h as the base of new vhost example
> > remove virtio_dev_(merge_)rx, copy_from_mbuf_to_ring,
> virtio_dev_(merge_)tx
> > add hpa region check and generation functions
> > dev->vdev
> > hpa region generation in new_device
> > call rte_vhost_enqueue_burst, rte_vhost_dequeue_burst API. Add mac
> learning and retry logic
> > patch virtio_tx_route
> > remove gpa_to_vva, base_index
> > other APIs
> > vmdq_rx_q change
> > minimal changes
> > add branch hint
> > disalbe RTE_IXGBE_INC_VEC as workaround for merge-able feature
> > add example Makefile
> >
> > examples/vhost/Makefile | 60 +
> > examples/vhost/main.c | 3051
> +++++++++++++++++++++++++++++++++++++++++++++++
> > examples/vhost/main.h | 122 ++
>
> I've cleaned up your patchset a bit and applied it.
>
> Thanks
> --
> Thomas
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2014-10-23 16:09 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-20 4:38 [dpdk-dev] [PATCH 00/14] new vhost example Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 01/14] copy old " Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 02/14] remove virtio_dev_rx, virtio_dev_merge_rx, copy_from_mbuf_to_ring, virtio_dev_tx, virtio_dev_merge_tx Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 03/14] add bak two hpa region functions Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 04/14] dev->vdev Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 05/14] hpa region Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 06/14] enqueue_burst, dequeue_burst, mac learning Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 07/14] patch virtio_tx_route Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 08/14] remove gpa_to_vva, base_index Huawei Xie
2014-10-23 9:43 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 09/14] other APIs Huawei Xie
2014-10-23 9:44 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 10/14] vmdq_rx_q Huawei Xie
2014-10-23 9:45 ` Thomas Monjalon
2014-10-20 4:38 ` [dpdk-dev] [PATCH 11/14] minor fixes Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 12/14] add branch hint Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 13/14] INC_VEC Huawei Xie
2014-10-20 4:38 ` [dpdk-dev] [PATCH 14/14] Makefile Huawei Xie
2014-10-23 9:48 ` Thomas Monjalon
2014-10-20 5:21 ` [dpdk-dev] [PATCH 00/14] new vhost example Ouyang, Changchun
2014-10-23 11:10 ` Thomas Monjalon
2014-10-23 16:17 ` Xie, Huawei
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).