DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jijiang Liu <jijiang.liu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 2/9] librte_ether:add VxLAN packet identification API in librte_ether
Date: Tue, 21 Oct 2014 16:46:01 +0800
Message-ID: <1413881168-20239-3-git-send-email-jijiang.liu@intel.com> (raw)
In-Reply-To: <1413881168-20239-1-git-send-email-jijiang.liu@intel.com>

There are "some" destination UDP port numbers that have unque meaning.
In terms of VxLAN, "IANA has assigned the value 4789 for the VXLAN UDP port, and this value
SHOULD be used by default as the destination UDP port. Some early implementations of VXLAN
have used other values for the destination port. To enable interoperability with these 
implementations, the destination port SHOULD be configurable."

Add two APIs in librte_ether for supporting UDP tunneling port configuration on i40e.
Currently, only VxLAN is implemented in this patch set.
 
Signed-off-by: Jijiang Liu <jijiang.liu@intel.com>
Acked-by: Helin Zhang <helin.zhang@intel.com>
Acked-by: Jingjing Wu <jingjing.wu@intel.com>
Acked-by: Jing Chen <jing.d.chen@intel.com>
---
 lib/librte_ether/rte_ethdev.c |   63 ++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ethdev.h |   75 +++++++++++++++++++++++++++++++++++++++++
 lib/librte_ether/rte_ether.h  |    8 ++++
 3 files changed, 146 insertions(+), 0 deletions(-)

diff --git a/lib/librte_ether/rte_ethdev.c b/lib/librte_ether/rte_ethdev.c
index 50f10d9..9e111b6 100644
--- a/lib/librte_ether/rte_ethdev.c
+++ b/lib/librte_ether/rte_ethdev.c
@@ -2038,6 +2038,69 @@ rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
 }
 
 int
+rte_eth_dev_udp_tunnel_add(uint8_t port_id,
+			   struct rte_eth_udp_tunnel *udp_tunnel,
+			   uint8_t count)
+{
+	uint8_t i;
+	struct rte_eth_dev *dev;
+	struct rte_eth_udp_tunnel *tunnel;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+
+	if (udp_tunnel == NULL) {
+		PMD_DEBUG_TRACE("Invalid udp_tunnel parameter\n");
+		return -EINVAL;
+	}
+	tunnel = udp_tunnel;
+
+	for (i = 0; i < count; i++, tunnel++) {
+		if (tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+			PMD_DEBUG_TRACE("Invalid tunnel type\n");
+			return -EINVAL;
+		}
+	}
+
+	dev = &rte_eth_devices[port_id];
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_add, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_add)(dev, udp_tunnel, count);
+}
+
+int
+rte_eth_dev_udp_tunnel_delete(uint8_t port_id,
+			      struct rte_eth_udp_tunnel *udp_tunnel,
+			      uint8_t count)
+{
+	uint8_t i;
+	struct rte_eth_dev *dev;
+	struct rte_eth_udp_tunnel *tunnel;
+
+	if (port_id >= nb_ports) {
+		PMD_DEBUG_TRACE("Invalid port_id=%d\n", port_id);
+		return -ENODEV;
+	}
+	dev = &rte_eth_devices[port_id];
+
+	if (udp_tunnel == NULL) {
+		PMD_DEBUG_TRACE("Invalid udp_tunnel parametr\n");
+		return -EINVAL;
+	}
+	tunnel = udp_tunnel;
+	for (i = 0; i < count; i++, tunnel++) {
+		if (tunnel->prot_type >= RTE_TUNNEL_TYPE_MAX) {
+			PMD_DEBUG_TRACE("Invalid tunnel type\n");
+			return -EINVAL;
+		}
+	}
+
+	FUNC_PTR_OR_ERR_RET(*dev->dev_ops->udp_tunnel_del, -ENOTSUP);
+	return (*dev->dev_ops->udp_tunnel_del)(dev, udp_tunnel, count);
+}
+
+int
 rte_eth_led_on(uint8_t port_id)
 {
 	struct rte_eth_dev *dev;
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index b69a6af..9ad11ec 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -710,6 +710,26 @@ struct rte_fdir_conf {
 };
 
 /**
+ * UDP tunneling configuration.
+ */
+struct rte_eth_udp_tunnel {
+	uint16_t udp_port;
+	uint8_t prot_type;
+};
+
+/**
+ * Tunneled type.
+ */
+enum rte_eth_tunnel_type {
+	RTE_TUNNEL_TYPE_NONE = 0,
+	RTE_TUNNEL_TYPE_VXLAN,
+	RTE_TUNNEL_TYPE_GENEVE,
+	RTE_TUNNEL_TYPE_TEREDO,
+	RTE_TUNNEL_TYPE_NVGRE,
+	RTE_TUNNEL_TYPE_MAX,
+};
+
+/**
  *  Possible l4type of FDIR filters.
  */
 enum rte_l4type {
@@ -831,6 +851,7 @@ struct rte_intr_conf {
  * configuration settings may be needed.
  */
 struct rte_eth_conf {
+	enum rte_eth_tunnel_type tunnel_type;
 	uint16_t link_speed;
 	/**< ETH_LINK_SPEED_10[0|00|000], or 0 for autonegotation */
 	uint16_t link_duplex;
@@ -1266,6 +1287,17 @@ typedef int (*eth_mirror_rule_reset_t)(struct rte_eth_dev *dev,
 				  uint8_t rule_id);
 /**< @internal Remove a traffic mirroring rule on an Ethernet device */
 
+typedef int (*eth_udp_tunnel_add_t)(struct rte_eth_dev *dev,
+				    struct rte_eth_udp_tunnel *tunnel_udp,
+				    uint8_t count);
+/**< @internal Add tunneling UDP info */
+
+typedef int (*eth_udp_tunnel_del_t)(struct rte_eth_dev *dev,
+				    struct rte_eth_udp_tunnel *tunnel_udp,
+				    uint8_t count);
+/**< @internal Delete tunneling UDP info */
+
+
 #ifdef RTE_NIC_BYPASS
 
 enum {
@@ -1446,6 +1478,8 @@ struct eth_dev_ops {
 	eth_set_vf_rx_t            set_vf_rx;  /**< enable/disable a VF receive */
 	eth_set_vf_tx_t            set_vf_tx;  /**< enable/disable a VF transmit */
 	eth_set_vf_vlan_filter_t   set_vf_vlan_filter;  /**< Set VF VLAN filter */
+	eth_udp_tunnel_add_t       udp_tunnel_add;
+	eth_udp_tunnel_del_t       udp_tunnel_del;
 	eth_set_queue_rate_limit_t set_queue_rate_limit;   /**< Set queue rate limit */
 	eth_set_vf_rate_limit_t    set_vf_rate_limit;   /**< Set VF rate limit */
 
@@ -3342,6 +3376,47 @@ int
 rte_eth_dev_rss_hash_conf_get(uint8_t port_id,
 			      struct rte_eth_rss_conf *rss_conf);
 
+ /**
+ * Add UDP tunneling port of an Ethernet device for filtering a specific
+ * tunneling packet by UDP port number.
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ * @param count
+ *   configuration count.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_add(uint8_t port_id,
+			   struct rte_eth_udp_tunnel *tunnel_udp,
+			   uint8_t count);
+
+ /**
+ * Detete UDP tunneling port configuration of Ethernet device
+ *
+ * @param port_id
+ *   The port identifier of the Ethernet device.
+ * @param tunnel_udp
+ *   UDP tunneling configuration.
+ * @param count
+ *   configuration count.
+ *
+ * @return
+ *   - (0) if successful.
+ *   - (-ENODEV) if port identifier is invalid.
+ *   - (-ENOTSUP) if hardware doesn't support tunnel type.
+ */
+int
+rte_eth_dev_udp_tunnel_delete(uint8_t port_id,
+			      struct rte_eth_udp_tunnel *tunnel_udp,
+			      uint8_t count);
+
 /**
  * add syn filter
  *
diff --git a/lib/librte_ether/rte_ether.h b/lib/librte_ether/rte_ether.h
index 2e08f23..ddbdbb3 100644
--- a/lib/librte_ether/rte_ether.h
+++ b/lib/librte_ether/rte_ether.h
@@ -286,6 +286,12 @@ struct vlan_hdr {
 	uint16_t eth_proto;/**< Ethernet type of encapsulated frame. */
 } __attribute__((__packed__));
 
+/* VXLAN protocol header */
+struct vxlan_hdr {
+	uint32_t vx_flags; /**< VxLAN flag. */
+	uint32_t vx_vni;   /**< VxLAN ID. */
+} __attribute__((__packed__));
+
 /* Ethernet frame types */
 #define ETHER_TYPE_IPv4 0x0800 /**< IPv4 Protocol. */
 #define ETHER_TYPE_IPv6 0x86DD /**< IPv6 Protocol. */
@@ -294,6 +300,8 @@ struct vlan_hdr {
 #define ETHER_TYPE_VLAN 0x8100 /**< IEEE 802.1Q VLAN tagging. */
 #define ETHER_TYPE_1588 0x88F7 /**< IEEE 802.1AS 1588 Precise Time Protocol. */
 
+#define ETHER_VXLAN_HLEN (sizeof(struct udp_hdr) + sizeof(struct vxlan_hdr))
+
 #ifdef __cplusplus
 }
 #endif
-- 
1.7.7.6

  parent reply	other threads:[~2014-10-21  8:38 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-21  8:45 [dpdk-dev] [PATCH v6 0/9] Support VxLAN on Fortville Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 1/9] librte_mbuf:the rte_mbuf structure changes Jijiang Liu
2014-10-21 10:26   ` Thomas Monjalon
2014-10-21 14:14     ` Liu, Jijiang
2014-10-22  8:45       ` Thomas Monjalon
2014-10-22  8:53         ` Liu, Jijiang
2014-10-23  2:23         ` Zhang, Helin
2014-11-12 13:26           ` Thomas Monjalon
2014-11-12 14:31             ` Zhang, Helin
2014-11-12 15:23               ` Thomas Monjalon
2014-11-13  3:17             ` Liu, Jijiang
2014-11-13  8:53               ` Thomas Monjalon
2014-11-13 11:24                 ` Liu, Jijiang
2014-11-13 11:35                   ` Thomas Monjalon
2014-10-21  8:46 ` Jijiang Liu [this message]
2014-10-21 10:51   ` [dpdk-dev] [PATCH v6 2/9] librte_ether:add VxLAN packet identification API in librte_ether Thomas Monjalon
2014-10-21 13:48     ` Liu, Jijiang
2014-10-21 21:19       ` Thomas Monjalon
2014-10-22  1:46         ` Liu, Jijiang
2014-10-22  9:52           ` Thomas Monjalon
2014-10-22 12:47             ` Liu, Jijiang
2014-10-22 13:25               ` Thomas Monjalon
2014-10-22  5:21         ` Liu, Jijiang
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 3/9] i40e:support VxLAN packet identification in librte_pmd_i40e Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 4/9] app/test-pmd:test VxLAN packet identification Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 5/9] librte_ether:add data structures of VxLAN filter Jijiang Liu
2014-10-21 15:13   ` Thomas Monjalon
2014-10-22  2:25     ` Liu, Jijiang
2014-10-22  9:31       ` Thomas Monjalon
2014-10-22 11:03         ` Liu, Jijiang
2014-10-23  9:06           ` Chilikin, Andrey
2014-10-22  6:45     ` Liu, Jijiang
2014-10-22  9:25       ` Thomas Monjalon
2014-10-22 13:54         ` Liu, Jijiang
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 6/9] i40e:implement API of VxLAN packet filter in librte_pmd_i40e Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 7/9] app/testpmd:test VxLAN packet filter Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 8/9] i40e:support VxLAN Tx checksum offload Jijiang Liu
2014-10-21  8:46 ` [dpdk-dev] [PATCH v6 9/9] app/testpmd:test " Jijiang Liu
2014-10-21 14:54 ` [dpdk-dev] [PATCH v6 0/9] Support VxLAN on Fortville Liu, Yong

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413881168-20239-3-git-send-email-jijiang.liu@intel.com \
    --to=jijiang.liu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git