DPDK patches and discussions
 help / color / mirror / Atom feed
From: Declan Doherty <declan.doherty@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH] bond: disabling broadcast mode when dpdk is built without RTE_MBUF_REFCNT
Date: Wed, 22 Oct 2014 11:28:44 +0100
Message-ID: <1413973724-14803-1-git-send-email-declan.doherty@intel.com> (raw)

Link bonding broadcast mode requires refcnt parameter in the mbuf struct to 
allow efficient transmission of duplicated mbufs on slave ports. 

This patch disables broadcast mode when the complication option RTE_MBUF_REFCNT
is disabled to allow clean building of the bonding library


Signed-off-by: Declan Doherty <declan.doherty@intel.com>
---
 app/test/test_link_bonding.c            |    9 ++++++++-
 lib/librte_pmd_bond/rte_eth_bond.h      |    3 ++-
 lib/librte_pmd_bond/rte_eth_bond_args.c |    2 ++
 lib/librte_pmd_bond/rte_eth_bond_pmd.c  |   12 ++++++++++++
 4 files changed, 24 insertions(+), 2 deletions(-)

diff --git a/app/test/test_link_bonding.c b/app/test/test_link_bonding.c
index db5b180..214d2a2 100644
--- a/app/test/test_link_bonding.c
+++ b/app/test/test_link_bonding.c
@@ -788,7 +788,10 @@ test_set_bonding_mode(void)
 	int bonding_modes[] = { BONDING_MODE_ROUND_ROBIN,
 							BONDING_MODE_ACTIVE_BACKUP,
 							BONDING_MODE_BALANCE,
-							BONDING_MODE_BROADCAST };
+#ifdef RTE_MBUF_REFCNT
+							BONDING_MODE_BROADCAST
+#endif
+							};
 
 	/* Test supported link bonding modes */
 	for (i = 0; i < (int)RTE_DIM(bonding_modes);	i++) {
@@ -3227,6 +3230,7 @@ test_balance_verify_slave_link_status_change_behaviour(void)
 	return remove_slaves_and_stop_bonded_device();
 }
 
+#ifdef RTE_MBUF_REFCNT
 /** Broadcast Mode Tests */
 
 static int
@@ -3704,6 +3708,7 @@ test_broadcast_verify_slave_link_status_change_behaviour(void)
 	/* Clean up and remove slaves from bonded device */
 	return remove_slaves_and_stop_bonded_device();
 }
+#endif
 
 static int
 test_reconfigure_bonded_device(void)
@@ -3797,11 +3802,13 @@ static struct unit_test_suite link_bonding_test_suite  = {
 		TEST_CASE(test_balance_verify_promiscuous_enable_disable),
 		TEST_CASE(test_balance_verify_mac_assignment),
 		TEST_CASE(test_balance_verify_slave_link_status_change_behaviour),
+#ifdef RTE_MBUF_REFCNT
 		TEST_CASE(test_broadcast_tx_burst),
 		TEST_CASE(test_broadcast_rx_burst),
 		TEST_CASE(test_broadcast_verify_promiscuous_enable_disable),
 		TEST_CASE(test_broadcast_verify_mac_assignment),
 		TEST_CASE(test_broadcast_verify_slave_link_status_change_behaviour),
+#endif
 		TEST_CASE(test_reconfigure_bonded_device),
 		TEST_CASE(test_close_bonded_device),
 
diff --git a/lib/librte_pmd_bond/rte_eth_bond.h b/lib/librte_pmd_bond/rte_eth_bond.h
index bd59780..344ca1e 100644
--- a/lib/librte_pmd_bond/rte_eth_bond.h
+++ b/lib/librte_pmd_bond/rte_eth_bond.h
@@ -71,11 +71,12 @@ extern "C" {
  * slaves using one of three available transmit policies - l2, l2+3 or l3+4.
  * See BALANCE_XMIT_POLICY macros definitions for further details on transmit
  * policies. */
+#ifdef RTE_MBUF_REFCNT
 #define BONDING_MODE_BROADCAST			(3)
 /**< Broadcast (Mode 3).
  * In this mode all transmitted packets will be transmitted on all available
  * active slaves of the bonded. */
-
+#endif
 /* Balance Mode Transmit Policies */
 #define BALANCE_XMIT_POLICY_LAYER2		(0)
 /**< Layer 2 (Ethernet MAC) */
diff --git a/lib/librte_pmd_bond/rte_eth_bond_args.c b/lib/librte_pmd_bond/rte_eth_bond_args.c
index 11d9816..05a2b07 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_args.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_args.c
@@ -169,7 +169,9 @@ bond_ethdev_parse_slave_mode_kvarg(const char *key __rte_unused,
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_ACTIVE_BACKUP:
 	case BONDING_MODE_BALANCE:
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
+#endif
 		return 0;
 	default:
 		return -1;
diff --git a/lib/librte_pmd_bond/rte_eth_bond_pmd.c b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
index 08d3b5f..147028b 100644
--- a/lib/librte_pmd_bond/rte_eth_bond_pmd.c
+++ b/lib/librte_pmd_bond/rte_eth_bond_pmd.c
@@ -61,7 +61,9 @@ bond_ethdev_rx_burst(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 
 	switch (internals->mode) {
 	case BONDING_MODE_ROUND_ROBIN:
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
+#endif
 	case BONDING_MODE_BALANCE:
 		for (i = 0; i < internals->active_slave_count && nb_pkts; i++) {
 			/* Offset of pointer to *bufs increases as packets are received
@@ -318,6 +320,7 @@ bond_ethdev_tx_balance(void *queue, struct rte_mbuf **bufs, uint16_t nb_pkts)
 	return num_tx_total;
 }
 
+#ifdef RTE_MBUF_REFCNT
 static uint16_t
 bond_ethdev_tx_burst_broadcast(void *queue, struct rte_mbuf **bufs,
 		uint16_t nb_pkts)
@@ -355,6 +358,7 @@ bond_ethdev_tx_burst_broadcast(void *queue, struct rte_mbuf **bufs,
 
 	return num_tx_total;
 }
+#endif
 
 void
 link_properties_set(struct rte_eth_dev *bonded_eth_dev,
@@ -431,7 +435,9 @@ mac_address_slaves_update(struct rte_eth_dev *bonded_eth_dev)
 	switch (internals->mode) {
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
+#endif
 		for (i = 0; i < internals->slave_count; i++) {
 			if (mac_address_set(&rte_eth_devices[internals->slaves[i]],
 					bonded_eth_dev->data->mac_addrs)) {
@@ -488,9 +494,11 @@ bond_ethdev_mode_set(struct rte_eth_dev *eth_dev, int mode)
 	case BONDING_MODE_BALANCE:
 		eth_dev->tx_pkt_burst = bond_ethdev_tx_balance;
 		break;
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
 		eth_dev->tx_pkt_burst = bond_ethdev_tx_burst_broadcast;
 		break;
+#endif
 	default:
 		return -1;
 	}
@@ -874,7 +882,9 @@ bond_ethdev_promiscuous_enable(struct rte_eth_dev *eth_dev)
 	/* Promiscuous mode is propagated to all slaves */
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
+#endif
 		for (i = 0; i < internals->slave_count; i++)
 			rte_eth_promiscuous_enable(internals->slaves[i]);
 		break;
@@ -898,7 +908,9 @@ bond_ethdev_promiscuous_disable(struct rte_eth_dev *dev)
 	/* Promiscuous mode is propagated to all slaves */
 	case BONDING_MODE_ROUND_ROBIN:
 	case BONDING_MODE_BALANCE:
+#ifdef RTE_MBUF_REFCNT
 	case BONDING_MODE_BROADCAST:
+#endif
 		for (i = 0; i < internals->slave_count; i++)
 			rte_eth_promiscuous_disable(internals->slaves[i]);
 		break;
-- 
1.7.4.1

             reply	other threads:[~2014-10-22 10:20 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-22 10:28 Declan Doherty [this message]
2014-10-22 10:47 ` De Lara Guarch, Pablo
2014-10-22 12:59 ` [dpdk-dev] [PATCH v2] " Declan Doherty
2014-10-22 13:54   ` Thomas Monjalon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1413973724-14803-1-git-send-email-declan.doherty@intel.com \
    --to=declan.doherty@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

DPDK patches and discussions

This inbox may be cloned and mirrored by anyone:

	git clone --mirror https://inbox.dpdk.org/dev/0 dev/git/0.git

	# If you have public-inbox 1.1+ installed, you may
	# initialize and index your mirror using the following commands:
	public-inbox-init -V2 dev dev/ https://inbox.dpdk.org/dev \
		dev@dpdk.org
	public-inbox-index dev

Example config snippet for mirrors.
Newsgroup available over NNTP:
	nntp://inbox.dpdk.org/inbox.dpdk.dev


AGPL code for this site: git clone https://public-inbox.org/public-inbox.git