* [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue
@ 2014-10-22 10:54 Bruce Richardson
2014-10-22 10:55 ` Richardson, Bruce
0 siblings, 1 reply; 5+ messages in thread
From: Bruce Richardson @ 2014-10-22 10:54 UTC (permalink / raw)
To: dev
Issue reported by Keith Wiles.
Clang fails with an error about a variable being used uninitialized:
CC ixgbe_rxtx_vec.o
/home/keithw/projects/dpdk-code/org-dpdk/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
error: variable 'dma_addr0' is uninitialized
when used here [-Werror,-Wuninitialized]
dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
^~~~~~~~~
This error can be fixed by replacing the call to xor which
takes two parameters, by a call to setzero, which does not take any.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
index 457f267..2236250 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
@@ -64,7 +64,7 @@ ixgbe_rxq_rearm(struct igb_rx_queue *rxq)
RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
rxq->nb_rx_desc) {
- dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
+ dma_addr0 = _mm_setzero_si128();
for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
rxep[i].mbuf = &rxq->fake_mbuf;
_mm_store_si128((__m128i *)&rxdp[i].read,
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue
2014-10-22 10:54 [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue Bruce Richardson
@ 2014-10-22 10:55 ` Richardson, Bruce
0 siblings, 0 replies; 5+ messages in thread
From: Richardson, Bruce @ 2014-10-22 10:55 UTC (permalink / raw)
To: dev
Self-nak, resent old patch.
> -----Original Message-----
> From: Richardson, Bruce
> Sent: Wednesday, October 22, 2014 11:54 AM
> To: dev@dpdk.org
> Cc: Richardson, Bruce
> Subject: [PATCH] ixgbe: Fix clang compilation issue
>
> Issue reported by Keith Wiles.
> Clang fails with an error about a variable being used uninitialized:
>
> CC ixgbe_rxtx_vec.o
> /home/keithw/projects/dpdk-code/org-
> dpdk/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
> error: variable 'dma_addr0' is uninitialized
> when used here [-Werror,-Wuninitialized]
> dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
> ^~~~~~~~~
>
> This error can be fixed by replacing the call to xor which
> takes two parameters, by a call to setzero, which does not take any.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
> lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> index 457f267..2236250 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> @@ -64,7 +64,7 @@ ixgbe_rxq_rearm(struct igb_rx_queue *rxq)
> RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
> if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
> rxq->nb_rx_desc) {
> - dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
> + dma_addr0 = _mm_setzero_si128();
> for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
> rxep[i].mbuf = &rxq->fake_mbuf;
> _mm_store_si128((__m128i *)&rxdp[i].read,
> --
> 1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue
2014-09-30 13:46 ` Wiles, Roger Keith
@ 2014-09-30 17:14 ` Thomas Monjalon
0 siblings, 0 replies; 5+ messages in thread
From: Thomas Monjalon @ 2014-09-30 17:14 UTC (permalink / raw)
To: bruce.richardson; +Cc: dev
> > Issue reported by Keith Wiles.
> > Clang fails with an error about a variable being used uninitialized:
> >
> > CC ixgbe_rxtx_vec.o
> > /home/keithw/projects/dpdk-code/org-dpdk/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
> > error: variable 'dma_addr0' is uninitialized
> > when used here [-Werror,-Wuninitialized]
> > dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
> > ^~~~~~~~~
> >
> > This error can be fixed by replacing the call to xor which
> > takes two parameters, by a call to setzero, which does not take any.
> >
> > Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
>
> Acked-by: Keith Wiles <keith.wiles@windiver.com>
Acked and applied
Thanks
--
Thomas
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue
2014-09-30 9:40 ` [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue Bruce Richardson
@ 2014-09-30 13:46 ` Wiles, Roger Keith
2014-09-30 17:14 ` Thomas Monjalon
0 siblings, 1 reply; 5+ messages in thread
From: Wiles, Roger Keith @ 2014-09-30 13:46 UTC (permalink / raw)
To: RICHARDSON, BRUCE; +Cc: dev
Acked-by: Keith Wiles <keith.wiles@windiver.com>
On Sep 30, 2014, at 4:40 AM, Bruce Richardson <bruce.richardson@intel.com> wrote:
> Issue reported by Keith Wiles.
> Clang fails with an error about a variable being used uninitialized:
>
> CC ixgbe_rxtx_vec.o
> /home/keithw/projects/dpdk-code/org-dpdk/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
> error: variable 'dma_addr0' is uninitialized
> when used here [-Werror,-Wuninitialized]
> dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
> ^~~~~~~~~
>
> This error can be fixed by replacing the call to xor which
> takes two parameters, by a call to setzero, which does not take any.
>
> Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
> ---
> lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> index 457f267..2236250 100644
> --- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> +++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
> @@ -64,7 +64,7 @@ ixgbe_rxq_rearm(struct igb_rx_queue *rxq)
> RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
> if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
> rxq->nb_rx_desc) {
> - dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
> + dma_addr0 = _mm_setzero_si128();
> for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
> rxep[i].mbuf = &rxq->fake_mbuf;
> _mm_store_si128((__m128i *)&rxdp[i].read,
> --
> 1.9.3
>
Keith Wiles, Principal Technologist with CTO office, Wind River mobile 972-213-5533
^ permalink raw reply [flat|nested] 5+ messages in thread
* [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue
2014-09-29 21:50 [dpdk-dev] Building current 1.8.1-rc1 with clang Wiles, Roger Keith
@ 2014-09-30 9:40 ` Bruce Richardson
2014-09-30 13:46 ` Wiles, Roger Keith
0 siblings, 1 reply; 5+ messages in thread
From: Bruce Richardson @ 2014-09-30 9:40 UTC (permalink / raw)
To: dev
Issue reported by Keith Wiles.
Clang fails with an error about a variable being used uninitialized:
CC ixgbe_rxtx_vec.o
/home/keithw/projects/dpdk-code/org-dpdk/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c:67:30:
error: variable 'dma_addr0' is uninitialized
when used here [-Werror,-Wuninitialized]
dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
^~~~~~~~~
This error can be fixed by replacing the call to xor which
takes two parameters, by a call to setzero, which does not take any.
Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>
---
lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
index 457f267..2236250 100644
--- a/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
+++ b/lib/librte_pmd_ixgbe/ixgbe_rxtx_vec.c
@@ -64,7 +64,7 @@ ixgbe_rxq_rearm(struct igb_rx_queue *rxq)
RTE_IXGBE_RXQ_REARM_THRESH) < 0) {
if (rxq->rxrearm_nb + RTE_IXGBE_RXQ_REARM_THRESH >=
rxq->nb_rx_desc) {
- dma_addr0 = _mm_xor_si128(dma_addr0, dma_addr0);
+ dma_addr0 = _mm_setzero_si128();
for (i = 0; i < RTE_IXGBE_DESCS_PER_LOOP; i++) {
rxep[i].mbuf = &rxq->fake_mbuf;
_mm_store_si128((__m128i *)&rxdp[i].read,
--
1.9.3
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-10-22 10:47 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-10-22 10:54 [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue Bruce Richardson
2014-10-22 10:55 ` Richardson, Bruce
-- strict thread matches above, loose matches on Subject: below --
2014-09-29 21:50 [dpdk-dev] Building current 1.8.1-rc1 with clang Wiles, Roger Keith
2014-09-30 9:40 ` [dpdk-dev] [PATCH] ixgbe: Fix clang compilation issue Bruce Richardson
2014-09-30 13:46 ` Wiles, Roger Keith
2014-09-30 17:14 ` Thomas Monjalon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).