From: Ouyang Changchun <changchun.ouyang@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v2 4/5] virtio: New API to enable/disable multicast and promisc mode
Date: Mon, 27 Oct 2014 11:45:32 +0800 [thread overview]
Message-ID: <1414381533-30370-5-git-send-email-changchun.ouyang@intel.com> (raw)
In-Reply-To: <1414381533-30370-1-git-send-email-changchun.ouyang@intel.com>
This patch adds new API in virtio for supporting promiscuous and allmulticast enabling and disabling.
Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com>
---
lib/librte_pmd_virtio/virtio_ethdev.c | 98 ++++++++++++++++++++++++++++++++++-
1 file changed, 97 insertions(+), 1 deletion(-)
diff --git a/lib/librte_pmd_virtio/virtio_ethdev.c b/lib/librte_pmd_virtio/virtio_ethdev.c
index 19930c0..acffa9e 100644
--- a/lib/librte_pmd_virtio/virtio_ethdev.c
+++ b/lib/librte_pmd_virtio/virtio_ethdev.c
@@ -66,6 +66,10 @@ static int eth_virtio_dev_init(struct eth_driver *eth_drv,
static int virtio_dev_configure(struct rte_eth_dev *dev);
static int virtio_dev_start(struct rte_eth_dev *dev);
static void virtio_dev_stop(struct rte_eth_dev *dev);
+static void virtio_dev_promiscuous_enable(struct rte_eth_dev *dev);
+static void virtio_dev_promiscuous_disable(struct rte_eth_dev *dev);
+static void virtio_dev_allmulticast_enable(struct rte_eth_dev *dev);
+static void virtio_dev_allmulticast_disable(struct rte_eth_dev *dev);
static void virtio_dev_info_get(struct rte_eth_dev *dev,
struct rte_eth_dev_info *dev_info);
static int virtio_dev_link_update(struct rte_eth_dev *dev,
@@ -403,6 +407,94 @@ virtio_dev_close(struct rte_eth_dev *dev)
virtio_dev_stop(dev);
}
+static void
+virtio_dev_promiscuous_enable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw
+ = VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct virtio_pmd_ctrl ctrl;
+ int dlen[1];
+ int ret;
+
+ ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
+ ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_PROMISC;
+ ctrl.data[0] = 1;
+ dlen[0] = 1;
+
+ ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
+
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Promisc enabling but send command "
+ "failed, this is too late now...\n");
+ }
+}
+
+static void
+virtio_dev_promiscuous_disable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw
+ = VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct virtio_pmd_ctrl ctrl;
+ int dlen[1];
+ int ret;
+
+ ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
+ ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_PROMISC;
+ ctrl.data[0] = 0;
+ dlen[0] = 1;
+
+ ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
+
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Promisc disabling but send command "
+ "failed, this is too late now...\n");
+ }
+}
+
+static void
+virtio_dev_allmulticast_enable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw
+ = VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct virtio_pmd_ctrl ctrl;
+ int dlen[1];
+ int ret;
+
+ ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
+ ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_ALLMULTI;
+ ctrl.data[0] = 1;
+ dlen[0] = 1;
+
+ ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
+
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Promisc enabling but send command "
+ "failed, this is too late now...\n");
+ }
+}
+
+static void
+virtio_dev_allmulticast_disable(struct rte_eth_dev *dev)
+{
+ struct virtio_hw *hw
+ = VIRTIO_DEV_PRIVATE_TO_HW(dev->data->dev_private);
+ struct virtio_pmd_ctrl ctrl;
+ int dlen[1];
+ int ret;
+
+ ctrl.hdr.class = VIRTIO_NET_CTRL_RX;
+ ctrl.hdr.cmd = VIRTIO_NET_CTRL_RX_ALLMULTI;
+ ctrl.data[0] = 0;
+ dlen[0] = 1;
+
+ ret = virtio_send_command(hw->cvq, &ctrl, dlen, 1);
+
+ if (ret) {
+ PMD_INIT_LOG(ERR, "Promisc disabling but send command "
+ "failed, this is too late now...\n");
+ }
+}
+
/*
* dev_ops for virtio, bare necessities for basic operation
*/
@@ -411,6 +503,10 @@ static struct eth_dev_ops virtio_eth_dev_ops = {
.dev_start = virtio_dev_start,
.dev_stop = virtio_dev_stop,
.dev_close = virtio_dev_close,
+ .promiscuous_enable = virtio_dev_promiscuous_enable,
+ .promiscuous_disable = virtio_dev_promiscuous_disable,
+ .allmulticast_enable = virtio_dev_allmulticast_enable,
+ .allmulticast_disable = virtio_dev_allmulticast_disable,
.dev_infos_get = virtio_dev_info_get,
.stats_get = virtio_dev_stats_get,
@@ -561,7 +657,7 @@ virtio_negotiate_features(struct virtio_hw *hw)
{
uint32_t host_features, mask;
- mask = VIRTIO_NET_F_CTRL_RX | VIRTIO_NET_F_CTRL_VLAN;
+ mask = VIRTIO_NET_F_CTRL_VLAN;
mask |= VIRTIO_NET_F_CSUM | VIRTIO_NET_F_GUEST_CSUM;
/* TSO and LRO are only available when their corresponding
--
1.8.4.2
next prev parent reply other threads:[~2014-10-27 3:37 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-08-25 2:09 [dpdk-dev] [PATCH 0/5] Support virtio multicast feature Ouyang Changchun
2014-08-25 2:09 ` [dpdk-dev] [PATCH 1/5] ethdev: Add new config field to config VMDQ offload register Ouyang Changchun
2014-08-25 2:09 ` [dpdk-dev] [PATCH 2/5] e1000: config VMDQ offload register to receive multicast packet Ouyang Changchun
2014-08-25 2:09 ` [dpdk-dev] [PATCH 3/5] examples/vhost: enable promisc mode and config VMDQ offload register for multicast feature Ouyang Changchun
2014-08-25 2:09 ` [dpdk-dev] [PATCH 4/5] virtio: New API to enable/disable multicast and promisc mode Ouyang Changchun
2014-08-26 0:13 ` Stephen Hemminger
2014-08-26 1:05 ` Ouyang, Changchun
2014-08-26 1:26 ` Stephen Hemminger
2014-08-25 2:09 ` [dpdk-dev] [PATCH 5/5] examples/vmdq: set default value to rx mode Ouyang Changchun
2014-09-24 9:07 ` [dpdk-dev] [PATCH 0/5] Support virtio multicast feature Zhang, XiaonanX
2014-10-27 3:45 ` [dpdk-dev] [PATCH v2 " Ouyang Changchun
2014-10-27 3:45 ` [dpdk-dev] [PATCH v2 1/5] ethdev: Add new config field to config VMDQ offload register Ouyang Changchun
2014-10-27 3:45 ` [dpdk-dev] [PATCH v2 2/5] e1000: config VMDQ offload register to receive multicast packet Ouyang Changchun
2014-10-27 3:45 ` [dpdk-dev] [PATCH v2 3/5] vhost: enable promisc mode and config VMDQ offload register for multicast feature Ouyang Changchun
2014-10-29 23:26 ` Xie, Huawei
2014-10-30 0:49 ` Ouyang, Changchun
2014-10-30 10:10 ` Bruce Richardson
2014-10-30 15:18 ` Ouyang, Changchun
2015-01-08 10:07 ` Xie, Huawei
2015-01-09 5:21 ` Ouyang, Changchun
2015-01-14 16:37 ` Thomas Monjalon
2015-01-23 3:20 ` Xie, Huawei
2014-10-27 3:45 ` Ouyang Changchun [this message]
2014-10-27 3:45 ` [dpdk-dev] [PATCH v2 5/5] examples/vmdq: set default value to rx mode Ouyang Changchun
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 0/5] Support virtio multicast feature Ouyang Changchun
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 1/5] ethdev: add vmdq rx mode Ouyang Changchun
2014-11-06 13:55 ` Thomas Monjalon
2014-11-08 2:13 ` Ouyang, Changchun
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 2/5] igb: Config VM offload register Ouyang Changchun
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 3/5] ixgbe: Config PFVML2FLT register Ouyang Changchun
2014-11-06 13:57 ` Thomas Monjalon
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 4/5] virtio: New API for promisc and allmulticast Ouyang Changchun
2014-11-06 13:59 ` Thomas Monjalon
2014-10-31 5:19 ` [dpdk-dev] [PATCH v3 5/5] vhost: enable promisc mode and multicast Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 0/5] Support virtio multicast feature Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 1/5] ethdev: Add vmdq rx mode Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 2/5] igb: Config VM offload register Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 3/5] ixgbe: Configure Rx mode for VMDQ Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 4/5] virtio: Support promiscuous and allmulticast Ouyang Changchun
2014-11-08 4:26 ` [dpdk-dev] [PATCH v4 5/5] vhost: Enable promisc mode and multicast Ouyang Changchun
2014-11-11 23:16 ` [dpdk-dev] [PATCH v4 0/5] Support virtio multicast feature Thomas Monjalon
2014-11-12 0:29 ` Ouyang, Changchun
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1414381533-30370-5-git-send-email-changchun.ouyang@intel.com \
--to=changchun.ouyang@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).