DPDK patches and discussions
 help / color / mirror / Atom feed
From: Tetsuya Mukawa <mukawa@igel.co.jp>
To: dev@dpdk.org
Cc: nakajima.yoshihiro@lab.ntt.co.jp, masutani.hitoshi@lab.ntt.co.jp
Subject: [dpdk-dev] [RFC PATCH 2/2] testpmd: Add support for the port hotplug framework
Date: Wed, 29 Oct 2014 17:51:02 +0900	[thread overview]
Message-ID: <1414572662-21408-2-git-send-email-mukawa@igel.co.jp> (raw)
In-Reply-To: <1414572662-21408-1-git-send-email-mukawa@igel.co.jp>

The patch introduces following commands.
- port [attach|detach] [p|v] [ident]
 - attach: attaching a port
 - detach: detaching a port
 - p: physical port
 - v: virtual port
 - ident: pci address of physical device.
          Or device name and paramerters of virtual device.
         (ex. 0000:02:00.0, eth_pcap0,iface=eth0)

Signed-off-by: Tetsuya Mukawa <mukawa@igel.co.jp>
---
 app/test-pmd/cmdline.c    | 139 +++++++++++++++++++++++-----
 app/test-pmd/config.c     |  54 +++++++----
 app/test-pmd/parameters.c |  21 +++--
 app/test-pmd/testpmd.c    | 225 ++++++++++++++++++++++++++++++++++++----------
 app/test-pmd/testpmd.h    |  17 ++++
 5 files changed, 364 insertions(+), 92 deletions(-)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 47162e9..85e4c24 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -545,6 +545,12 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"port close (port_id|all)\n"
 			"    Close all ports or port_id.\n\n"
 
+			"port add (p|a) (ident)\n"
+			"    Add physical or virtual dev by pci address or virtual device name\n\n"
+
+			"port del (p|a) (port_id)\n"
+			"    Del physical or virtual dev by port_id\n\n"
+
 			"port config (port_id|all)"
 			" speed (10|100|1000|10000|40000|auto)"
 			" duplex (half|full|auto)\n"
@@ -791,6 +797,101 @@ cmdline_parse_inst_t cmd_operate_specific_port = {
 	},
 };
 
+/* *** attach a specificied port *** */
+struct cmd_operate_attach_port_result {
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t keyword;
+	cmdline_fixed_string_t type;
+	cmdline_fixed_string_t identifier;
+};
+
+static void cmd_operate_attach_port_parsed(void *parsed_result,
+				__attribute__((unused)) struct cmdline *cl,
+				__attribute__((unused)) void *data)
+{
+	struct cmd_operate_attach_port_result *res = parsed_result;
+
+	if (!strcmp(res->keyword, "attach"))
+		attach_port(res->type, res->identifier);
+	else
+		printf("Unknown parameter\n");
+}
+
+cmdline_parse_token_string_t cmd_operate_attach_port_port =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+			port, "port");
+cmdline_parse_token_string_t cmd_operate_attach_port_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+			keyword, "attach");
+cmdline_parse_token_string_t cmd_operate_attach_port_type =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+			type, "p#v");
+
+cmdline_parse_token_string_t cmd_operate_attach_port_identifier =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_attach_port_result,
+			identifier, NULL);
+
+cmdline_parse_inst_t cmd_operate_attach_port = {
+	.f = cmd_operate_attach_port_parsed,
+	.data = NULL,
+	.help_str = "port attach p|v ident p: physical, v: virtual, "
+		"ident: pci address or virtual dev name",
+	.tokens = {
+		(void *)&cmd_operate_attach_port_port,
+		(void *)&cmd_operate_attach_port_keyword,
+		(void *)&cmd_operate_attach_port_type,
+		(void *)&cmd_operate_attach_port_identifier,
+		NULL,
+	},
+};
+
+/* *** detach a specificied port *** */
+struct cmd_operate_detach_port_result {
+	cmdline_fixed_string_t port;
+	cmdline_fixed_string_t keyword;
+	cmdline_fixed_string_t type;
+	uint8_t port_id;
+};
+
+static void cmd_operate_detach_port_parsed(void *parsed_result,
+				__attribute__((unused)) struct cmdline *cl,
+				__attribute__((unused)) void *data)
+{
+	struct cmd_operate_detach_port_result *res = parsed_result;
+
+	if (!strcmp(res->keyword, "detach"))
+		detach_port(res->type, res->port_id);
+	else
+		printf("Unknown parameter\n");
+}
+
+cmdline_parse_token_string_t cmd_operate_detach_port_port =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_detach_port_result,
+			port, "port");
+cmdline_parse_token_string_t cmd_operate_detach_port_keyword =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_detach_port_result,
+			keyword, "detach");
+cmdline_parse_token_string_t cmd_operate_detach_port_type =
+	TOKEN_STRING_INITIALIZER(struct cmd_operate_detach_port_result,
+			type, "p#v");
+
+cmdline_parse_token_num_t cmd_operate_detach_port_port_id =
+	TOKEN_NUM_INITIALIZER(struct cmd_operate_detach_port_result,
+			port_id, UINT8);
+
+cmdline_parse_inst_t cmd_operate_detach_port = {
+	.f = cmd_operate_detach_port_parsed,
+	.data = NULL,
+	.help_str = "port detach p|v port_id p: physical, v: virtual",
+	.tokens = {
+		(void *)&cmd_operate_detach_port_port,
+		(void *)&cmd_operate_detach_port_keyword,
+		(void *)&cmd_operate_detach_port_type,
+		(void *)&cmd_operate_detach_port_port_id,
+		NULL,
+	},
+};
+
 /* *** configure speed for all ports *** */
 struct cmd_config_speed_all {
 	cmdline_fixed_string_t port;
@@ -845,7 +946,7 @@ cmd_config_speed_all_parsed(void *parsed_result,
 		return;
 	}
 
-	for (pid = 0; pid < nb_ports; pid++) {
+	FOREACH_PORT(pid, ports) {
 		ports[pid].dev_conf.link_speed = link_speed;
 		ports[pid].dev_conf.link_duplex = link_duplex;
 	}
@@ -913,10 +1014,8 @@ cmd_config_speed_specific_parsed(void *parsed_result,
 		return;
 	}
 
-	if (res->id >= nb_ports) {
-		printf("Port id %d must be less than %d\n", res->id, nb_ports);
+	if (port_id_is_invalid(res->id))
 		return;
-	}
 
 	if (!strcmp(res->value1, "10"))
 		link_speed = ETH_LINK_SPEED_10;
@@ -3689,10 +3788,8 @@ static void cmd_set_bond_mac_addr_parsed(void *parsed_result,
 	struct cmd_set_bond_mac_addr_result *res = parsed_result;
 	int ret;
 
-	if (res->port_num >= nb_ports) {
-		printf("Port id %d must be less than %d\n", res->port_num, nb_ports);
+	if (port_id_is_invalid(res->port_num))
 		return;
-	}
 
 	ret = rte_eth_bond_mac_address_set(res->port_num, &res->address);
 
@@ -3870,7 +3967,7 @@ static void cmd_set_promisc_mode_parsed(void *parsed_result,
 
 	/* all ports */
 	if (allports) {
-		for (i = 0; i < nb_ports; i++) {
+		FOREACH_PORT(i, ports) {
 			if (enable)
 				rte_eth_promiscuous_enable(i);
 			else
@@ -3950,7 +4047,7 @@ static void cmd_set_allmulti_mode_parsed(void *parsed_result,
 
 	/* all ports */
 	if (allports) {
-		for (i = 0; i < nb_ports; i++) {
+		FOREACH_PORT(i, ports) {
 			if (enable)
 				rte_eth_allmulticast_enable(i);
 			else
@@ -5135,25 +5232,25 @@ static void cmd_showportall_parsed(void *parsed_result,
 	struct cmd_showportall_result *res = parsed_result;
 	if (!strcmp(res->show, "clear")) {
 		if (!strcmp(res->what, "stats"))
-			for (i = 0; i < nb_ports; i++)
+			FOREACH_PORT(i, ports)
 				nic_stats_clear(i);
 		else if (!strcmp(res->what, "xstats"))
-			for (i = 0; i < nb_ports; i++)
+			FOREACH_PORT(i, ports)
 				nic_xstats_clear(i);
 	} else if (!strcmp(res->what, "info"))
-		for (i = 0; i < nb_ports; i++)
+		FOREACH_PORT(i, ports)
 			port_infos_display(i);
 	else if (!strcmp(res->what, "stats"))
-		for (i = 0; i < nb_ports; i++)
+		FOREACH_PORT(i, ports)
 			nic_stats_display(i);
 	else if (!strcmp(res->what, "xstats"))
-		for (i = 0; i < nb_ports; i++)
+		FOREACH_PORT(i, ports)
 			nic_xstats_display(i);
 	else if (!strcmp(res->what, "fdir"))
-		for (i = 0; i < nb_ports; i++)
+		FOREACH_PORT(i, ports)
 			fdir_get_infos(i);
 	else if (!strcmp(res->what, "stat_qmap"))
-		for (i = 0; i < nb_ports; i++)
+		FOREACH_PORT(i, ports)
 			nic_stats_mapping_display(i);
 }
 
@@ -7715,6 +7812,8 @@ cmdline_parse_ctx_t main_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_qmap,
 	(cmdline_parse_inst_t *)&cmd_operate_port,
 	(cmdline_parse_inst_t *)&cmd_operate_specific_port,
+	(cmdline_parse_inst_t *)&cmd_operate_attach_port,
+	(cmdline_parse_inst_t *)&cmd_operate_detach_port,
 	(cmdline_parse_inst_t *)&cmd_config_speed_all,
 	(cmdline_parse_inst_t *)&cmd_config_speed_specific,
 	(cmdline_parse_inst_t *)&cmd_config_rx_tx,
@@ -7784,7 +7883,7 @@ prompt(void)
 static void
 cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue)
 {
-	if (id < nb_ports) {
+	if (!_port_id_is_invalid(id)) {
 		/* check if need_reconfig has been set to 1 */
 		if (ports[id].need_reconfig == 0)
 			ports[id].need_reconfig = dev;
@@ -7794,7 +7893,7 @@ cmd_reconfig_device_queue(portid_t id, uint8_t dev, uint8_t queue)
 	} else {
 		portid_t pid;
 
-		for (pid = 0; pid < nb_ports; pid++) {
+		FOREACH_PORT(pid, ports) {
 			/* check if need_reconfig has been set to 1 */
 			if (ports[pid].need_reconfig == 0)
 				ports[pid].need_reconfig = dev;
@@ -7812,10 +7911,8 @@ bypass_is_supported(portid_t port_id)
 	struct rte_port   *port;
 	struct rte_pci_id *pci_id;
 
-	if (port_id >= nb_ports) {
-		printf("\tPort id must be less than %d.\n", nb_ports);
+	if (port_id_is_invalid(port_id))
 		return 0;
-	}
 
 	/* Get the device id. */
 	port    = &ports[port_id];
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 9bc08f4..02c8829 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -114,11 +114,15 @@ nic_stats_display(portid_t port_id)
 	struct rte_eth_stats stats;
 	struct rte_port *port = &ports[port_id];
 	uint8_t i;
+	portid_t pid;
 
 	static const char *nic_stats_border = "########################";
 
-	if (port_id >= nb_ports) {
-		printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+	if (port_id_is_invalid(port_id)) {
+		printf("Valid port range is [0");
+		FOREACH_PORT(pid, ports)
+			printf(", %d", pid);
+		printf("]\n");
 		return;
 	}
 	rte_eth_stats_get(port_id, &stats);
@@ -191,8 +195,13 @@ nic_stats_display(portid_t port_id)
 void
 nic_stats_clear(portid_t port_id)
 {
-	if (port_id >= nb_ports) {
-		printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+	portid_t pid;
+
+	if (port_id_is_invalid(port_id)) {
+		printf("Valid port range is [0");
+		FOREACH_PORT(pid, ports)
+			printf(", %d", pid);
+		printf("]\n");
 		return;
 	}
 	rte_eth_stats_reset(port_id);
@@ -239,11 +248,15 @@ nic_stats_mapping_display(portid_t port_id)
 {
 	struct rte_port *port = &ports[port_id];
 	uint16_t i;
+	portid_t pid;
 
 	static const char *nic_stats_mapping_border = "########################";
 
-	if (port_id >= nb_ports) {
-		printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+	if (port_id_is_invalid(port_id)) {
+		printf("Valid port range is [0");
+		FOREACH_PORT(pid, ports)
+			printf(", %d", pid);
+		printf("]\n");
 		return;
 	}
 
@@ -291,9 +304,13 @@ port_infos_display(portid_t port_id)
 	int vlan_offload;
 	struct rte_mempool * mp;
 	static const char *info_border = "*********************";
+	portid_t pid;
 
-	if (port_id >= nb_ports) {
-		printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+	if (port_id_is_invalid(port_id)) {
+		printf("Valid port range is [0");
+		FOREACH_PORT(pid, ports)
+			printf(", %d", pid);
+		printf("]\n");
 		return;
 	}
 	port = &ports[port_id];
@@ -346,14 +363,23 @@ port_infos_display(portid_t port_id)
 }
 
 int
-port_id_is_invalid(portid_t port_id)
+_port_id_is_invalid(portid_t port_id)
 {
-	if (port_id < nb_ports)
+	if (ports[port_id].enabled)
 		return 0;
-	printf("Invalid port %d (must be < nb_ports=%d)\n", port_id, nb_ports);
 	return 1;
 }
 
+int
+port_id_is_invalid(portid_t port_id)
+{
+	if (_port_id_is_invalid(port_id)) {
+		printf("Invalid port %d\n", port_id);
+		return 1;
+	}
+	return 0;
+}
+
 static int
 vlan_id_is_invalid(uint16_t vlan_id)
 {
@@ -1386,12 +1412,8 @@ set_fwd_ports_list(unsigned int *portlist, unsigned int nb_pt)
  again:
 	for (i = 0; i < nb_pt; i++) {
 		port_id = (portid_t) portlist[i];
-		if (port_id >= nb_ports) {
-			printf("Invalid port id %u >= %u\n",
-			       (unsigned int) port_id,
-			       (unsigned int) nb_ports);
+		if (port_id_is_invalid(port_id))
 			return;
-		}
 		if (record_now)
 			fwd_ports_ids[i] = port_id;
 	}
diff --git a/app/test-pmd/parameters.c b/app/test-pmd/parameters.c
index 9573a43..06d0eeb 100644
--- a/app/test-pmd/parameters.c
+++ b/app/test-pmd/parameters.c
@@ -375,6 +375,7 @@ parse_portnuma_config(const char *q_arg)
 	};
 	unsigned long int_fld[_NUM_FLD];
 	char *str_fld[_NUM_FLD];
+	portid_t pid;
 
 	/* reset from value set at definition */
 	while ((p = strchr(p0,'(')) != NULL) {
@@ -396,8 +397,11 @@ parse_portnuma_config(const char *q_arg)
 				return -1;
 		}
 		port_id = (uint8_t)int_fld[FLD_PORT];
-		if (port_id >= nb_ports) {
-			printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+		if (port_id_is_invalid(port_id)) {
+			printf("Valid port range is [0");
+			FOREACH_PORT(pid, ports)
+				printf(", %d", pid);
+			printf("]\n");
 			return -1;
 		}
 		socket_id = (uint8_t)int_fld[FLD_SOCKET];
@@ -428,6 +432,7 @@ parse_ringnuma_config(const char *q_arg)
 	};
 	unsigned long int_fld[_NUM_FLD];
 	char *str_fld[_NUM_FLD];
+	portid_t pid;
 	#define RX_RING_ONLY 0x1
 	#define TX_RING_ONLY 0x2
 	#define RXTX_RING    0x3
@@ -452,8 +457,11 @@ parse_ringnuma_config(const char *q_arg)
 				return -1;
 		}
 		port_id = (uint8_t)int_fld[FLD_PORT];
-		if (port_id >= nb_ports) {
-			printf("Invalid port, range is [0, %d]\n", nb_ports - 1);
+		if (port_id_is_invalid(port_id)) {
+			printf("Valid port range is [0");
+			FOREACH_PORT(pid, ports)
+				printf(", %d", pid);
+			printf("]\n");
 			return -1;
 		}
 		socket_id = (uint8_t)int_fld[FLD_SOCKET];
@@ -670,12 +678,11 @@ launch_args_parse(int argc, char** argv)
 #endif
 			if (!strcmp(lgopts[opt_idx].name, "nb-ports")) {
 				n = atoi(optarg);
-				if (n > 0 && n <= nb_ports)
+				if (n > 0 && !_port_id_is_invalid(n))
 					nb_fwd_ports = (uint8_t) n;
 				else
 					rte_exit(EXIT_FAILURE,
-						 "nb-ports should be > 0 and <= %d\n",
-						 nb_ports);
+						 "Invalid port %d\n", n);
 			}
 			if (!strcmp(lgopts[opt_idx].name, "nb-cores")) {
 				n = atoi(optarg);
diff --git a/app/test-pmd/testpmd.c b/app/test-pmd/testpmd.c
index f76406f..3ef8007 100644
--- a/app/test-pmd/testpmd.c
+++ b/app/test-pmd/testpmd.c
@@ -71,6 +71,7 @@
 #include <rte_pci.h>
 #include <rte_ether.h>
 #include <rte_ethdev.h>
+#include <rte_dev.h>
 #include <rte_string_fns.h>
 #ifdef RTE_LIBRTE_PMD_XENVIRT
 #include <rte_eth_xenvirt.h>
@@ -315,7 +316,7 @@ uint16_t nb_rx_queue_stats_mappings = 0;
 
 /* Forward function declarations */
 static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
-static void check_all_ports_link_status(uint8_t port_num, uint32_t port_mask);
+static void check_all_ports_link_status(uint32_t port_mask);
 
 /*
  * Check if all the ports are started.
@@ -552,7 +553,8 @@ init_config(void)
 				+ RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
 
 		if (!numa_support)
-			nb_mbuf_per_pool = (nb_mbuf_per_pool * nb_ports);
+			nb_mbuf_per_pool =
+				(nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
 	}
 
 	if (!numa_support) {
@@ -565,14 +567,19 @@ init_config(void)
 
 	/* Configuration of Ethernet ports. */
 	ports = rte_zmalloc("testpmd: ports",
-			    sizeof(struct rte_port) * nb_ports,
+			    sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
 			    CACHE_LINE_SIZE);
 	if (ports == NULL) {
-		rte_exit(EXIT_FAILURE, "rte_zmalloc(%d struct rte_port) "
-							"failed\n", nb_ports);
+		rte_exit(EXIT_FAILURE,
+				"rte_zmalloc(%d struct rte_port) failed\n",
+				RTE_MAX_ETHPORTS);
 	}
 
-	for (pid = 0; pid < nb_ports; pid++) {
+	/* enabled allocated ports */
+	for (pid = 0; pid < nb_ports; pid++)
+		ports[pid].enabled = 1;
+
+	FOREACH_PORT(pid, ports) {
 		port = &ports[pid];
 		rte_eth_dev_info_get(pid, &port->dev_info);
 
@@ -602,8 +609,7 @@ init_config(void)
 			nb_mbuf_per_pool = nb_mbuf_per_pool/nb_ports;
 
 		for (i = 0; i < MAX_SOCKET; i++) {
-			nb_mbuf = (nb_mbuf_per_pool *
-						port_per_socket[i]);
+			nb_mbuf = (nb_mbuf_per_pool * RTE_MAX_ETHPORTS);
 			if (nb_mbuf)
 				mbuf_pool_create(mbuf_data_size,
 						nb_mbuf,i);
@@ -635,14 +641,6 @@ reconfig(portid_t new_port_id)
 	struct rte_port *port;
 
 	/* Reconfiguration of Ethernet ports. */
-	ports = rte_realloc(ports,
-			    sizeof(struct rte_port) * nb_ports,
-			    CACHE_LINE_SIZE);
-	if (ports == NULL) {
-		rte_exit(EXIT_FAILURE, "rte_realloc(%d struct rte_port) failed\n",
-				nb_ports);
-	}
-
 	port = &ports[new_port_id];
 	rte_eth_dev_info_get(new_port_id, &port->dev_info);
 
@@ -662,7 +660,7 @@ init_fwd_streams(void)
 	streamid_t sm_id, nb_fwd_streams_new;
 
 	/* set socket id according to numa or not */
-	for (pid = 0; pid < nb_ports; pid++) {
+	FOREACH_PORT(pid, ports) {
 		port = &ports[pid];
 		if (nb_rxq > port->dev_info.max_rx_queues) {
 			printf("Fail: nb_rxq(%d) is greater than "
@@ -1263,7 +1261,7 @@ all_ports_started(void)
 	portid_t pi;
 	struct rte_port *port;
 
-	for (pi = 0; pi < nb_ports; pi++) {
+	FOREACH_PORT(pi, ports) {
 		port = &ports[pi];
 		/* Check if there is a port which is not started */
 		if (port->port_status != RTE_PORT_STARTED)
@@ -1275,6 +1273,45 @@ all_ports_started(void)
 }
 
 int
+all_ports_stopped(void)
+{
+	portid_t pi;
+	struct rte_port *port;
+
+	FOREACH_PORT(pi, ports) {
+		port = &ports[pi];
+		if (port->port_status != RTE_PORT_STOPPED)
+			return 0;
+	}
+
+	return 1;
+}
+
+int
+port_is_started(portid_t port_id)
+{
+	if (port_id_is_invalid(port_id))
+		return 0;
+
+	if (ports[port_id].port_status != RTE_PORT_STARTED)
+		return 0;
+
+	return 1;
+}
+
+static int
+port_is_closed(portid_t port_id)
+{
+	if (port_id_is_invalid(port_id))
+		return 0;
+
+	if (ports[port_id].port_status != RTE_PORT_CLOSED)
+		return 0;
+
+	return 1;
+}
+
+int
 start_port(portid_t pid)
 {
 	int diag, need_check_link_status = 0;
@@ -1295,8 +1332,8 @@ start_port(portid_t pid)
 
 	if(dcb_config)
 		dcb_test = 1;
-	for (pi = 0; pi < nb_ports; pi++) {
-		if (pid < nb_ports && pid != pi)
+	FOREACH_PORT(pi, ports) {
+		if (!_port_id_is_invalid(pid) && pid != pi)
 			continue;
 
 		port = &ports[pi];
@@ -1420,7 +1457,7 @@ start_port(portid_t pid)
 	}
 
 	if (need_check_link_status && !no_link_check)
-		check_all_ports_link_status(nb_ports, RTE_PORT_ALL);
+		check_all_ports_link_status(RTE_PORT_ALL);
 	else
 		printf("Please stop the ports first\n");
 
@@ -1445,8 +1482,8 @@ stop_port(portid_t pid)
 	}
 	printf("Stopping ports...\n");
 
-	for (pi = 0; pi < nb_ports; pi++) {
-		if (pid < nb_ports && pid != pi)
+	FOREACH_PORT(pi, ports) {
+		if (!_port_id_is_invalid(pid) && pid != pi)
 			continue;
 
 		port = &ports[pi];
@@ -1462,7 +1499,7 @@ stop_port(portid_t pid)
 		need_check_link_status = 1;
 	}
 	if (need_check_link_status && !no_link_check)
-		check_all_ports_link_status(nb_ports, RTE_PORT_ALL);
+		check_all_ports_link_status(RTE_PORT_ALL);
 
 	printf("Done\n");
 }
@@ -1480,8 +1517,8 @@ close_port(portid_t pid)
 
 	printf("Closing ports...\n");
 
-	for (pi = 0; pi < nb_ports; pi++) {
-		if (pid < nb_ports && pid != pi)
+	FOREACH_PORT(pi, ports) {
+		if (!_port_id_is_invalid(pid) && pid != pi)
 			continue;
 
 		port = &ports[pi];
@@ -1501,31 +1538,124 @@ close_port(portid_t pid)
 	printf("Done\n");
 }
 
-int
-all_ports_stopped(void)
+
+static inline int
+attach_physical_device_port(char *identifier, uint8_t *pi)
 {
-	portid_t pi;
-	struct rte_port *port;
+	struct rte_pci_addr addr;
 
-	for (pi = 0; pi < nb_ports; pi++) {
-		port = &ports[pi];
-		if (port->port_status != RTE_PORT_STOPPED)
-			return 0;
+	if (eal_parse_pci_DomBDF(identifier, &addr) != 0) {
+		printf("invalid PCI identifier <%s>\n", identifier);
+		return -1;
 	}
+	return rte_eal_dev_attach_pdev(&addr, pi);
+}
 
-	return 1;
+static inline int
+attach_virtual_device_port(char *identifier, uint8_t *pi)
+{
+	return rte_eal_dev_attach_vdev(identifier, pi);
 }
 
-int
-port_is_started(portid_t port_id)
+static inline int
+detach_physical_device_port(uint8_t pi, char *identifier)
 {
-	if (port_id_is_invalid(port_id))
+	struct rte_pci_addr addr;
+
+	if (rte_eal_dev_detach_pdev(pi, &addr))
 		return -1;
 
-	if (ports[port_id].port_status != RTE_PORT_STARTED)
-		return 0;
+	snprintf(identifier, RTE_ETH_NAME_MAX_LEN, "%04x.%02x.%02x.%d",
+			addr.domain, addr.bus, addr.devid, addr.function);
+	return 0;
+}
 
-	return 1;
+static inline int
+detach_virtual_device_port(uint8_t pi, char *identifier)
+{
+	return rte_eal_dev_detach_vdev(pi, identifier);
+}
+
+void
+attach_port(char *type, char *identifier)
+{
+	portid_t i, j, pi = 0;
+
+	printf("Attaching a new port...\n");
+
+	if (test_done == 0) {
+		printf("Please stop forwarding first\n");
+		return;
+	}
+
+	if (strncmp(type, "p", 1) == 0) {
+		if (attach_physical_device_port(identifier, &pi))
+			return;
+	} else if (strncmp(type, "v", 1) == 0) {
+		if (attach_virtual_device_port(identifier, &pi))
+			return;
+	}
+
+	ports[pi].enabled = 1;
+	reconfig(pi);
+	rte_eth_promiscuous_enable(pi);
+
+	nb_ports = rte_eth_dev_count();
+
+	/* set_default_fwd_ports_config(); */
+	i = 0;
+	FOREACH_PORT(j, ports) {
+		fwd_ports_ids[i] = j;
+		i++;
+	}
+	nb_cfg_ports = nb_ports;
+	nb_fwd_ports++;
+
+	ports[pi].port_status = RTE_PORT_STOPPED;
+
+	printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
+	printf("Done\n");
+}
+
+void
+detach_port(char *type, uint8_t port_id)
+{
+	portid_t i, pi = 0;
+	char name[RTE_ETH_NAME_MAX_LEN];
+
+	printf("Detaching a port...\n");
+
+	if (!port_is_closed(port_id)) {
+		printf("Please close port first\n");
+		return;
+	}
+
+	if (strncmp(type, "p", 1) == 0) {
+		if (detach_physical_device_port(port_id, name))
+			return;
+	} else if (strncmp(type, "v", 1) == 0) {
+		if (detach_virtual_device_port(port_id, name))
+			return;
+	}
+
+	ports[port_id].enabled = 0;
+	rte_eth_promiscuous_disable(pi);
+
+	nb_ports = rte_eth_dev_count();
+
+	/* set_default_fwd_ports_config(); */
+	i = 0;
+	FOREACH_PORT(pi, ports) {
+		fwd_ports_ids[i] = pi;
+		i++;
+	}
+	nb_cfg_ports = nb_ports;
+	nb_fwd_ports--;
+
+	printf("Port '%s' is detached. Now total ports is %d\n",
+			name, nb_ports);
+	printf("Done\n");
+	return;
 }
 
 void
@@ -1533,7 +1663,7 @@ pmd_test_exit(void)
 {
 	portid_t pt_id;
 
-	for (pt_id = 0; pt_id < nb_ports; pt_id++) {
+	FOREACH_PORT(pt_id, ports) {
 		printf("Stopping port %d...", pt_id);
 		fflush(stdout);
 		rte_eth_dev_close(pt_id);
@@ -1552,7 +1682,7 @@ struct pmd_test_command {
 
 /* Check the link status of all ports in up to 9s, and print them finally */
 static void
-check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
+check_all_ports_link_status(uint32_t port_mask)
 {
 #define CHECK_INTERVAL 100 /* 100ms */
 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
@@ -1563,7 +1693,7 @@ check_all_ports_link_status(uint8_t port_num, uint32_t port_mask)
 	fflush(stdout);
 	for (count = 0; count <= MAX_CHECK_TIME; count++) {
 		all_ports_up = 1;
-		for (portid = 0; portid < port_num; portid++) {
+		FOREACH_PORT(portid, ports) {
 			if ((port_mask & (1 << portid)) == 0)
 				continue;
 			memset(&link, 0, sizeof(link));
@@ -1687,7 +1817,7 @@ init_port_config(void)
 	portid_t pid;
 	struct rte_port *port;
 
-	for (pid = 0; pid < nb_ports; pid++) {
+	FOREACH_PORT(pid, ports) {
 		port = &ports[pid];
 		port->dev_conf.rxmode = rx_mode;
 		port->dev_conf.fdir_conf = fdir_conf;
@@ -1869,8 +1999,7 @@ main(int argc, char** argv)
 		rte_panic("Cannot init EAL\n");
 
 	nb_ports = (portid_t) rte_eth_dev_count();
-	if (nb_ports == 0)
-		rte_exit(EXIT_FAILURE, "No probed ethernet devices - "
+		RTE_LOG(WARNING, EAL, "No probed ethernet devices - "
 							"check that "
 			  "CONFIG_RTE_LIBRTE_IGB_PMD=y and that "
 			  "CONFIG_RTE_LIBRTE_EM_PMD=y and that "
@@ -1897,7 +2026,7 @@ main(int argc, char** argv)
 		rte_exit(EXIT_FAILURE, "Start ports failed\n");
 
 	/* set all ports to promiscuous mode by default */
-	for (port_id = 0; port_id < nb_ports; port_id++)
+	FOREACH_PORT(port_id, ports)
 		rte_eth_promiscuous_enable(port_id);
 
 #ifdef RTE_LIBRTE_CMDLINE
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index 9cbfeac..b79bd1f 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -133,6 +133,7 @@ struct fwd_stream {
  *   Bit 11: Insert VLAN Label
  */
 struct rte_port {
+	uint8_t                 enabled;    /**< Port enabled or not */
 	struct rte_eth_dev_info dev_info;   /**< PCI info + driver name */
 	struct rte_eth_conf     dev_conf;   /**< Port configuration. */
 	struct ether_addr       eth_addr;   /**< Port ethernet address */
@@ -157,6 +158,19 @@ struct rte_port {
 	struct rte_eth_txconf   tx_conf;    /**< tx configuration */
 };
 
+static portid_t __rte_unused
+find_next_port(portid_t p, struct rte_port *ports, int size)
+{
+	while ((ports[p].enabled == 0) && (p < size))
+		p++;
+	return p;
+}
+
+#define FOREACH_PORT(p, ports) \
+	for (p = find_next_port(0, ports, RTE_MAX_ETHPORTS); \
+	    p < RTE_MAX_ETHPORTS; \
+	    p = find_next_port(p + 1, ports, RTE_MAX_ETHPORTS))
+
 /**
  * The data structure associated with each forwarding logical core.
  * The logical cores are internally numbered by a core index from 0 to
@@ -512,6 +526,8 @@ int init_port_dcb_config(portid_t pid,struct dcb_config *dcb_conf);
 int start_port(portid_t pid);
 void stop_port(portid_t pid);
 void close_port(portid_t pid);
+void attach_port(char *type, char *identifier);
+void detach_port(char *type, uint8_t port_id);
 int all_ports_stopped(void);
 int port_is_started(portid_t port_id);
 void pmd_test_exit(void);
@@ -550,6 +566,7 @@ void get_ethertype_filter(uint8_t port_id, uint16_t index);
 void get_2tuple_filter(uint8_t port_id, uint16_t index);
 void get_5tuple_filter(uint8_t port_id, uint16_t index);
 void get_flex_filter(uint8_t port_id, uint16_t index);
+int _port_id_is_invalid(portid_t port_id);
 int port_id_is_invalid(portid_t port_id);
 int rx_queue_id_is_invalid(queueid_t rxq_id);
 int tx_queue_id_is_invalid(queueid_t txq_id);
-- 
1.9.1

      reply	other threads:[~2014-10-29  8:42 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-10-29  8:51 [dpdk-dev] [RFC PATCH 1/2] librte_pmd_pcap: Add support for port hotplug Tetsuya Mukawa
2014-10-29  8:51 ` Tetsuya Mukawa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414572662-21408-2-git-send-email-mukawa@igel.co.jp \
    --to=mukawa@igel.co.jp \
    --cc=dev@dpdk.org \
    --cc=masutani.hitoshi@lab.ntt.co.jp \
    --cc=nakajima.yoshihiro@lab.ntt.co.jp \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).