DPDK patches and discussions
 help / color / mirror / Atom feed
From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v5 04/21] ethdev: define structures for adding/deleting flow director
Date: Thu, 30 Oct 2014 15:26:29 +0800	[thread overview]
Message-ID: <1414654006-7472-5-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1414654006-7472-1-git-send-email-jingjing.wu@intel.com>

New structures are defined to add or delete flow director filter

Signed-off-by: Jingjing Wu <jingjing.wu@intel.com>
---
 lib/librte_ether/rte_eth_ctrl.h | 171 ++++++++++++++++++++++++++++++++++++++++
 1 file changed, 171 insertions(+)

diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
index b4ab731..77b784e 100644
--- a/lib/librte_ether/rte_eth_ctrl.h
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -52,6 +52,7 @@ extern "C" {
 enum rte_filter_type {
 	RTE_ETH_FILTER_NONE = 0,
 	RTE_ETH_FILTER_TUNNEL,
+	RTE_ETH_FILTER_FDIR,
 	RTE_ETH_FILTER_MAX
 };
 
@@ -132,6 +133,176 @@ struct rte_eth_tunnel_filter_conf {
 	uint16_t queue_id;      /** < queue number. */
 };
 
+/**
+ * Define all structures for Flow Director Filter type corresponding with specific operations.
+ */
+
+/**
+ * Flow type
+ */
+enum rte_eth_flow_type {
+	RTE_ETH_FLOW_TYPE_NONE = 0x0,
+	RTE_ETH_FLOW_TYPE_UDPV4,
+	RTE_ETH_FLOW_TYPE_TCPV4,
+	RTE_ETH_FLOW_TYPE_SCTPV4,
+	RTE_ETH_FLOW_TYPE_IPV4_OTHER,
+	RTE_ETH_FLOW_TYPE_UDPV6,
+	RTE_ETH_FLOW_TYPE_TCPV6,
+	RTE_ETH_FLOW_TYPE_SCTPV6,
+	RTE_ETH_FLOW_TYPE_IPV6_OTHER,
+};
+
+/**
+ * A structure used to define the input for IPV4 UDP flow
+ */
+struct rte_eth_udpv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+	uint16_t src_port;    /**< UDP source port to match. */
+	uint16_t dst_port;    /**< UDP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV4 TCP flow
+ */
+struct rte_eth_tcpv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+	uint16_t src_port;    /**< TCP source port to match. */
+	uint16_t dst_port;    /**< TCP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV4 SCTP flow
+ */
+struct rte_eth_sctpv4_flow {
+	uint32_t src_ip;          /**< IPv4 source address to match. */
+	uint32_t dst_ip;          /**< IPv4 destination address to match. */
+	uint32_t verify_tag;      /**< Verify tag to match */
+};
+
+/**
+ * A structure used to define the input for IPV4 flow
+ */
+struct rte_eth_ipv4_flow {
+	uint32_t src_ip;      /**< IPv4 source address to match. */
+	uint32_t dst_ip;      /**< IPv4 destination address to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 UDP flow
+ */
+struct rte_eth_udpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint16_t src_port;       /**< UDP source port to match. */
+	uint16_t dst_port;       /**< UDP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 TCP flow
+ */
+struct rte_eth_tcpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint16_t src_port;       /**< TCP source port to match. */
+	uint16_t dst_port;       /**< TCP destination port to match. */
+};
+
+/**
+ * A structure used to define the input for IPV6 SCTP flow
+ */
+struct rte_eth_sctpv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+	uint32_t verify_tag;     /**< Verify tag to match */
+};
+
+/**
+ * A structure used to define the input for IPV6 flow
+ */
+struct rte_eth_ipv6_flow {
+	uint32_t src_ip[4];      /**< IPv6 source address to match. */
+	uint32_t dst_ip[4];      /**< IPv6 destination address to match. */
+};
+
+/**
+ * An union contains the inputs for all types of flow
+ */
+union rte_eth_fdir_flow {
+	struct rte_eth_udpv4_flow  udp4_flow;
+	struct rte_eth_tcpv4_flow  tcp4_flow;
+	struct rte_eth_sctpv4_flow sctp4_flow;
+	struct rte_eth_ipv4_flow   ip4_flow;
+	struct rte_eth_udpv6_flow  udp6_flow;
+	struct rte_eth_tcpv6_flow  tcp6_flow;
+	struct rte_eth_sctpv6_flow sctp6_flow;
+	struct rte_eth_ipv6_flow   ip6_flow;
+};
+
+#define RTE_ETH_FDIR_MAX_FLEXWORD_LEN  8
+/**
+ * A structure used to contain extend input of flow
+ */
+struct rte_eth_fdir_flow_ext {
+	uint16_t vlan_tci;
+	uint8_t num_flexwords;         /**< Number of flexwords */
+	uint16_t flexwords[RTE_ETH_FDIR_MAX_FLEXWORD_LEN];
+	/**< It is filled by the flexible payload to match. Each word is in little endian. */
+	uint16_t dest_id;
+	/**< Destination vsi or pool id. 0 indicates PF by default.*/
+};
+
+/**
+ * A structure used to define the input for a flow director filter entry
+ */
+struct rte_eth_fdir_input {
+	enum rte_eth_flow_type flow_type;      /**< Type of flow */
+	union rte_eth_fdir_flow flow;
+	/**< Flow fields to match, dependent on flow_type */
+	struct rte_eth_fdir_flow_ext flow_ext;
+	/**< Additional fields to match */
+};
+
+/**
+ * Flow director report status
+ * It defines what will be reported if fdir entry is matched.
+ */
+enum rte_eth_fdir_status {
+	RTE_ETH_FDIR_NO_REPORT_STATUS = 0, /**< Report nothing. */
+	RTE_ETH_FDIR_REPORT_ID,            /**< Only report FD ID. */
+	RTE_ETH_FDIR_REPORT_ID_FLEX_4,     /**< Report FD ID and 4 flex bytes. */
+	RTE_ETH_FDIR_REPORT_FLEX_8,        /**< Report 8 flex bytes. */
+};
+
+/**
+ * A structure used to define an action when match FDIR packet filter.
+ */
+struct rte_eth_fdir_action {
+	uint16_t rx_queue;        /**< Queue assigned to if fdir match. */
+	uint16_t cnt_idx;
+	/**< Statistic counter index in hardware. If set to 0, default counter will
+	     be used for all flow director entries on each device. */
+	uint8_t  drop;            /**< Accept or reject */
+	enum rte_eth_fdir_status report_status;  /**< Status report option */
+	uint8_t flex_off;
+	/**< If report_status is RTE_ETH_FDIR_REPORT_ID_FLEX_4 or
+	     RTE_ETH_FDIR_REPORT_FLEX_8, flex_off specifies where the reported
+	     flex bytes start from in flexible payload. */
+};
+
+/**
+ * A structure used to define the flow director filter entry by filter_ctrl API
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_ADD and
+ * RTE_ETH_FILTER_DELETE operations.
+ */
+struct rte_eth_fdir_filter {
+	uint32_t soft_id;
+	/**< ID, an unique value is required when deal with fdir entry */
+	struct rte_eth_fdir_input input;    /**< Input set */
+	struct rte_eth_fdir_action action;  /**< Action taken when match */
+};
+
 #ifdef __cplusplus
 }
 #endif
-- 
1.8.1.4

  parent reply	other threads:[~2014-10-30  7:18 UTC|newest]

Thread overview: 123+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-09-26  6:03 [dpdk-dev] [PATCH v3 00/20] Support flow director programming on Fortville Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 01/20] i40e: set up and initialize flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 02/20] i40e: tear down " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 03/20] i40e: initialize flexible payload setting Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 04/20] lib/librte_ether: new filter APIs definition Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 05/20] lib/librte_ether: define structures for adding/deleting flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 06/20] i40e: implement operations to add/delete " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 07/20] app/test-pmd: add test commands to add/delete flow director filter Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 08/20] i40e: match counter for flow director Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 09/20] i40e: report flow director match info to mbuf Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 10/20] lib/librte_ether: define structures for getting flow director information Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 11/20] i40e: implement operations to get fdir info Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 12/20] app/test-pmd: display fdir statistics Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 13/20] i40e: implement operation to flush flow director table Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 14/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 15/20] lib/librte_ether: define structures for configuring flexible payload Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v316/20] i40e: implement operations to configure " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 17/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 18/20] lib/librte_ether: define structures for configuring flex masks Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 19/20] i40e: implement operations to configure flexible masks Jingjing Wu
2014-09-26  6:03 ` [dpdk-dev] [PATCH v3 20/20] app/test-pmd: add test command " Jingjing Wu
2014-10-13 15:58   ` De Lara Guarch, Pablo
2014-10-22  1:01 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 02/21] i40e: tear down " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-27 16:57     ` Thomas Monjalon
2014-10-28  1:18       ` Wu, Jingjing
2014-10-28 13:17         ` Thomas Monjalon
2014-10-29  1:29           ` Wu, Jingjing
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-28 13:23     ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-28 13:28     ` Thomas Monjalon
2014-10-29  1:45       ` Wu, Jingjing
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-28 13:44     ` Thomas Monjalon
2014-10-29  2:10       ` Wu, Jingjing
2014-10-29  9:48         ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 15/21] testpmd: add test command " Jingjing Wu
2014-10-28 13:53     ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-28 14:14     ` Thomas Monjalon
2014-10-29  3:21       ` Wu, Jingjing
2014-10-29  9:55         ` Thomas Monjalon
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 18/21] testpmd: add test command " Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-22  1:01   ` [dpdk-dev] [PATCH v4 21/21] testpmd: add test command " Jingjing Wu
2014-10-28 14:18     ` Thomas Monjalon
2014-10-29  2:35       ` Wu, Jingjing
2014-10-27 15:22   ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Thomas Monjalon
2014-10-28  0:48   ` Zhang, Helin
2014-10-30  7:26   ` [dpdk-dev] [PATCH v5 " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-30  8:25       ` Wu, Jingjing
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 02/21] i40e: tear down " Jingjing Wu
2014-11-19  7:53       ` Cao, Min
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-30  7:26     ` Jingjing Wu [this message]
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 05/21] i40e: implement operations to add/delete flow director Jingjing Wu
2014-11-05 21:18       ` De Lara Guarch, Pablo
2014-11-13  9:50         ` Thomas Monjalon
2014-11-13 11:36           ` Wu, Jingjing
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 15/21] testpmd: add test command " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 18/21] testpmd: add test command " Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-30  7:26     ` [dpdk-dev] [PATCH v5 21/21] testpmd: add test command " Jingjing Wu
2014-10-30  8:07     ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-11-21  0:46     ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 01/22] i40e: set up and initialize flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 02/22] i40e: tear down " Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 03/22] i40e: initialize flexible payload setting Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 04/22] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 05/22] i40e: define functions for transition between flow_type and pctype Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 06/22] i40e: implement operations to add/delete flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 07/22] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 08/22] i40e: match counter for flow director Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 09/22] mbuf: extend fdir field Jingjing Wu
2014-11-21 17:03         ` Chilikin, Andrey
2014-11-21 19:34           ` Ananyev, Konstantin
2014-11-21 19:37             ` Chilikin, Andrey
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 10/22] i40e: report flow director match info to mbuf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 11/22] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 12/22] i40e: implement operation to flush flow director table Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 13/22] testpmd: add test command " Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 14/22] ethdev: define structures for getting flow director information Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 15/22] i40e: implement operations to get fdir info Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 16/22] ethdev: define structures for getting flow director statistics Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 17/22] i40e: implement operations to get fdir statistics Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 18/22] testpmd: display fdir info Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 19/22] ethdev: add flexible payload setting in eth_conf Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 20/22] i40e: take flow director flexible payload configuration Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 21/22] testpmd: add test command to configure flexible mask Jingjing Wu
2014-11-21  0:46       ` [dpdk-dev] [PATCH v6 22/22] testpmd: add test command to configure flexible payload Jingjing Wu
2014-11-21 11:34       ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Ananyev, Konstantin
2014-11-24 23:20         ` Thomas Monjalon
2014-11-25  4:51           ` Wu, Jingjing
2014-11-25  9:23             ` Thomas Monjalon
2014-10-30  7:34   ` [dpdk-dev] [PATCH v4 00/21] " Cao, Min
2014-11-19  7:53   ` Cao, Min
2014-10-30  7:12 ` [dpdk-dev] [PATCH v3 00/20] " Cao, Min

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1414654006-7472-5-git-send-email-jingjing.wu@intel.com \
    --to=jingjing.wu@intel.com \
    --cc=dev@dpdk.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).