From: Jingjing Wu <jingjing.wu@intel.com>
To: dev@dpdk.org
Subject: [dpdk-dev] [PATCH v6 14/22] ethdev: define structures for getting flow director information
Date: Fri, 21 Nov 2014 08:46:48 +0800 [thread overview]
Message-ID: <1416530816-2159-15-git-send-email-jingjing.wu@intel.com> (raw)
In-Reply-To: <1416530816-2159-1-git-send-email-jingjing.wu@intel.com>
define structures for getting flow director information includes:
- mode
- supported flow types
- table space
- flexible payload size and granularity
- configured flexible payload and mask information
Signed-off-by: jingjing.wu <jingjing.wu@intel.com>
---
lib/librte_ether/rte_eth_ctrl.h | 92 ++++++++++++++++++++++++++++++++++++++++-
lib/librte_ether/rte_ethdev.h | 9 ----
2 files changed, 90 insertions(+), 11 deletions(-)
diff --git a/lib/librte_ether/rte_eth_ctrl.h b/lib/librte_ether/rte_eth_ctrl.h
index 9856842..b05d9eb 100644
--- a/lib/librte_ether/rte_eth_ctrl.h
+++ b/lib/librte_ether/rte_eth_ctrl.h
@@ -69,8 +69,7 @@ enum rte_filter_op {
RTE_ETH_FILTER_FLUSH, /**< flush all entries */
RTE_ETH_FILTER_GET, /**< get filter entry */
RTE_ETH_FILTER_SET, /**< configurations */
- RTE_ETH_FILTER_INFO,
- /**< get information of filter, such as status or statistics */
+ RTE_ETH_FILTER_INFO, /**< retrieve information */
RTE_ETH_FILTER_OP_MAX
};
@@ -322,6 +321,95 @@ struct rte_eth_fdir_filter {
struct rte_eth_fdir_action action; /**< Action taken when match */
};
+/**
+ * Payload type
+ */
+enum rte_eth_payload_type {
+ RTE_ETH_PAYLOAD_UNKNOWN = 0,
+ RTE_ETH_L2_PAYLOAD,
+ RTE_ETH_L3_PAYLOAD,
+ RTE_ETH_L4_PAYLOAD,
+ RTE_ETH_PAYLOAD_MAX = 8,
+};
+
+/**
+ * A structure used to select bytes extracted from the protocol layers to
+ * flexible payload for filter
+ */
+struct rte_eth_flex_payload_cfg {
+ enum rte_eth_payload_type type; /**< Payload type */
+ uint16_t src_offset[RTE_ETH_FDIR_MAX_FLEXLEN];
+ /**< Offset in bytes from the beginning of packet's payload
+ src_offset[i] indicates the flexbyte i's offset in original
+ packet payload. This value should be less than
+ flex_payload_limit in struct rte_eth_fdir_info.*/
+};
+
+/**
+ * A structure used to define FDIR masks for flexible payload
+ * for each flow type
+ */
+struct rte_eth_fdir_flex_mask {
+ enum rte_eth_flow_type flow_type; /**< Flow type */
+ uint8_t mask[RTE_ETH_FDIR_MAX_FLEXLEN];
+ /**< Mask for the whole flexible payload */
+};
+
+/**
+ * A structure used to define all flexible payload related setting
+ * include flexpay load and flex mask
+ */
+struct rte_eth_fdir_flex_conf {
+ uint16_t nb_payloads; /**< The number of following payload cfg */
+ uint16_t nb_flexmasks; /**< The number of following mask */
+ struct rte_eth_flex_payload_cfg flex_set[RTE_ETH_PAYLOAD_MAX];
+ /**< Flex payload configuration for each payload type */
+ struct rte_eth_fdir_flex_mask flex_mask[RTE_ETH_FLOW_TYPE_MAX];
+ /**< Flex mask configuration for each flow type */
+};
+
+/**
+ * Flow Director setting modes: none, signature or perfect.
+ */
+enum rte_fdir_mode {
+ RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
+ RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode. */
+ RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode. */
+};
+
+/**
+ * A structure used to get the information of flow director filter.
+ * It supports RTE_ETH_FILTER_FDIR with RTE_ETH_FILTER_INFO operation.
+ * It includes the mode, flexible payload configuration information,
+ * capabilities and supported flow types, flexible payload characters.
+ * It can be gotten to help taking specific configurations per device.
+ */
+struct rte_eth_fdir_info {
+ enum rte_fdir_mode mode; /**< Flow director mode */
+ struct rte_eth_fdir_flex_conf flex_conf;
+ /**< Flex payload configuration information */
+ uint32_t guarant_spc; /**< Guaranteed spaces.*/
+ uint32_t best_spc; /**< Best effort spaces.*/
+ uint32_t flow_types_mask[RTE_ETH_FLOW_TYPE_MAX / sizeof(uint32_t)];
+ /**< Bit mask for every supported flow type. */
+ uint32_t max_flexpayload; /**< Total flex payload in bytes. */
+ uint32_t flex_payload_unit;
+ /**< Flexible payload unit in bytes. Size and alignments of all flex
+ payload segments should be multiplies of this value. */
+ uint32_t max_flex_payload_segment_num;
+ /**< Max number of flexible payload continuous segments.
+ Each segment should be a multiple of flex_payload_unit.*/
+ uint16_t flex_payload_limit;
+ /**< Maximum src_offset in bytes allowed. It indicates that
+ src_offset[i] in struct rte_eth_flex_payload_cfg should be
+ less than this value. */
+ uint32_t flex_bitmask_unit;
+ /**< Flex bitmask unit in bytes. Size of flex bitmasks should
+ be a multiply of this value. */
+ uint32_t max_flex_bitmask_num;
+ /**< Max supported size of flex bitmasks in flex_bitmask_unit */
+};
+
#ifdef __cplusplus
}
#endif
diff --git a/lib/librte_ether/rte_ethdev.h b/lib/librte_ether/rte_ethdev.h
index c29525b..b658cf4 100644
--- a/lib/librte_ether/rte_ethdev.h
+++ b/lib/librte_ether/rte_ethdev.h
@@ -683,15 +683,6 @@ struct rte_eth_pfc_conf {
};
/**
- * Flow Director setting modes: none (default), signature or perfect.
- */
-enum rte_fdir_mode {
- RTE_FDIR_MODE_NONE = 0, /**< Disable FDIR support. */
- RTE_FDIR_MODE_SIGNATURE, /**< Enable FDIR signature filter mode. */
- RTE_FDIR_MODE_PERFECT, /**< Enable FDIR perfect filter mode. */
-};
-
-/**
* Memory space that can be configured to store Flow Director filters
* in the board memory.
*/
--
1.8.1.4
next prev parent reply other threads:[~2014-11-21 0:37 UTC|newest]
Thread overview: 123+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-09-26 6:03 [dpdk-dev] [PATCH v3 00/20] Support flow director programming on Fortville Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 01/20] i40e: set up and initialize flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 02/20] i40e: tear down " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 03/20] i40e: initialize flexible payload setting Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 04/20] lib/librte_ether: new filter APIs definition Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 05/20] lib/librte_ether: define structures for adding/deleting flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 06/20] i40e: implement operations to add/delete " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 07/20] app/test-pmd: add test commands to add/delete flow director filter Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 08/20] i40e: match counter for flow director Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 09/20] i40e: report flow director match info to mbuf Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 10/20] lib/librte_ether: define structures for getting flow director information Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 11/20] i40e: implement operations to get fdir info Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 12/20] app/test-pmd: display fdir statistics Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 13/20] i40e: implement operation to flush flow director table Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 14/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 15/20] lib/librte_ether: define structures for configuring flexible payload Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v316/20] i40e: implement operations to configure " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 17/20] app/test-pmd: add test command " Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 18/20] lib/librte_ether: define structures for configuring flex masks Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 19/20] i40e: implement operations to configure flexible masks Jingjing Wu
2014-09-26 6:03 ` [dpdk-dev] [PATCH v3 20/20] app/test-pmd: add test command " Jingjing Wu
2014-10-13 15:58 ` De Lara Guarch, Pablo
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 02/21] i40e: tear down " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-27 16:57 ` Thomas Monjalon
2014-10-28 1:18 ` Wu, Jingjing
2014-10-28 13:17 ` Thomas Monjalon
2014-10-29 1:29 ` Wu, Jingjing
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-28 13:23 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-28 13:28 ` Thomas Monjalon
2014-10-29 1:45 ` Wu, Jingjing
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-28 13:44 ` Thomas Monjalon
2014-10-29 2:10 ` Wu, Jingjing
2014-10-29 9:48 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 15/21] testpmd: add test command " Jingjing Wu
2014-10-28 13:53 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-28 14:14 ` Thomas Monjalon
2014-10-29 3:21 ` Wu, Jingjing
2014-10-29 9:55 ` Thomas Monjalon
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 18/21] testpmd: add test command " Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-22 1:01 ` [dpdk-dev] [PATCH v4 21/21] testpmd: add test command " Jingjing Wu
2014-10-28 14:18 ` Thomas Monjalon
2014-10-29 2:35 ` Wu, Jingjing
2014-10-27 15:22 ` [dpdk-dev] [PATCH v4 00/21] Support flow director programming on Fortville Thomas Monjalon
2014-10-28 0:48 ` Zhang, Helin
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-10-30 8:25 ` Wu, Jingjing
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 02/21] i40e: tear down " Jingjing Wu
2014-11-19 7:53 ` Cao, Min
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 03/21] i40e: initialize flexible payload setting Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 04/21] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 05/21] i40e: implement operations to add/delete " Jingjing Wu
2014-11-05 21:18 ` De Lara Guarch, Pablo
2014-11-13 9:50 ` Thomas Monjalon
2014-11-13 11:36 ` Wu, Jingjing
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 06/21] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 07/21] i40e: match counter for flow director Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 08/21] mbuf: extend fdir field Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 09/21] i40e: report flow director match info to mbuf Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 10/21] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 11/21] ethdev: define structures for getting flow director information Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 12/21] i40e: implement operations to get fdir info Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 13/21] testpmd: display fdir statistics Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 14/21] i40e: implement operation to flush flow director table Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 15/21] testpmd: add test command " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 16/21] ethdev: define structures for configuring flexible payload Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 17/21] i40e: implement operations to configure " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 18/21] testpmd: add test command " Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 19/21] ethdev: define structures for configuring flex masks Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 20/21] i40e: implement operations to configure flexible masks Jingjing Wu
2014-10-30 7:26 ` [dpdk-dev] [PATCH v5 21/21] testpmd: add test command " Jingjing Wu
2014-10-30 8:07 ` [dpdk-dev] [PATCH v5 01/21] i40e: set up and initialize flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 01/22] i40e: set up and initialize flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 02/22] i40e: tear down " Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 03/22] i40e: initialize flexible payload setting Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 04/22] ethdev: define structures for adding/deleting flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 05/22] i40e: define functions for transition between flow_type and pctype Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 06/22] i40e: implement operations to add/delete flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 07/22] testpmd: add test commands to add/delete flow director filter Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 08/22] i40e: match counter for flow director Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 09/22] mbuf: extend fdir field Jingjing Wu
2014-11-21 17:03 ` Chilikin, Andrey
2014-11-21 19:34 ` Ananyev, Konstantin
2014-11-21 19:37 ` Chilikin, Andrey
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 10/22] i40e: report flow director match info to mbuf Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 11/22] testpmd: print extended fdir info in mbuf Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 12/22] i40e: implement operation to flush flow director table Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 13/22] testpmd: add test command " Jingjing Wu
2014-11-21 0:46 ` Jingjing Wu [this message]
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 15/22] i40e: implement operations to get fdir info Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 16/22] ethdev: define structures for getting flow director statistics Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 17/22] i40e: implement operations to get fdir statistics Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 18/22] testpmd: display fdir info Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 19/22] ethdev: add flexible payload setting in eth_conf Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 20/22] i40e: take flow director flexible payload configuration Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 21/22] testpmd: add test command to configure flexible mask Jingjing Wu
2014-11-21 0:46 ` [dpdk-dev] [PATCH v6 22/22] testpmd: add test command to configure flexible payload Jingjing Wu
2014-11-21 11:34 ` [dpdk-dev] [PATCH v6 00/22] Support flow director programming on Fortville Ananyev, Konstantin
2014-11-24 23:20 ` Thomas Monjalon
2014-11-25 4:51 ` Wu, Jingjing
2014-11-25 9:23 ` Thomas Monjalon
2014-10-30 7:34 ` [dpdk-dev] [PATCH v4 00/21] " Cao, Min
2014-11-19 7:53 ` Cao, Min
2014-10-30 7:12 ` [dpdk-dev] [PATCH v3 00/20] " Cao, Min
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1416530816-2159-15-git-send-email-jingjing.wu@intel.com \
--to=jingjing.wu@intel.com \
--cc=dev@dpdk.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).